Physical and occupational therapy for children with rheumatic diseases

Branch Thrombus after Endovascular Treatment with Arch Branched Devices for Aortic Arch Pathologies

OBJECTIVE

The aim of this study was to describe the occurrence of branch thrombosis following endovascular treatment of aortic arch pathology using an arch branched device (ABD) and to determine whether this is influenced by clinical and geometric parameters.

METHODS

In this retrospective observational study of patients treated with an ABD in three centres, the primary endpoint was thrombus formation within a branch during follow up. Secondary endpoints were technical success, serious adverse events (SAEs), early and late death, stroke, and re-interventions. Geometric measurements (tortuosity index and curvature) were determined on pre- and post-operative computed tomography angiograms.

RESULTS

Thirty nine patients were treated and 68 antegrade branches were analysed (innominate artery, n = 27; common carotid artery [CCA], n = 40; left subclavian artery [LSA], n = 1). Thrombus was identified within seven branches (10%) on surveillance imaging (innominate artery, n = 6; CCA, n = 1; LSA, n = 0; p = .021) and was associated with a wider distal bridging stent diameter (median 14.0 mm [13.3, 15.3] vs. 8.7 mm [IQR 5.9]; p = .026), a higher degree of reversed tapering (4.3 mm [3.8, 5.2] vs. 1.2 mm [0.3, 3.1]; p = .023), use of polyethylene terephthalate (Dacron) covered (vs. expanded polytetrafluoroethylene) bridging stents (23% vs. 2%; p = .011), and higher body mass index (BMI) (32.1 kg/m2 [28.7, 36.2] vs. 25.7 kg/m2 [23.8, 29.2]; p = .029), but not with pre-operative or post-operative tortuosity index or curvature or alterations. Regarding secondary outcomes, the technical success rate was 97%, SAEs occurred in 15 patients (38%), early and late death rates were 8% and 23%, respectively, and early and late stroke rates were 5% and 23%, respectively.

CONCLUSION

The risk of developing branch thrombosis after endovascular intervention with an ABD is considerable, especially of innominate artery branches, characterised by Dacron covered large diameter bridging stents, and in patients with a high BMI. Large prospective studies are required to analyse factors associated with branch thrombosis.

Design of experiment approach to identify the dominant geometrical feature of left coronary artery influencing atherosclerosis

Background and Objective. Coronary artery geometry heavily influences local hemodynamics, potentially leading to atherosclerosis. Consequently, the unique geometrical configuration of an individual by birth can be associated with future risk of atherosclerosis. Although current researches focus on exploring the relationship between local hemodynamics and coronary artery geometry, this study aims to identify the order of influence of the geometrical features through systematic experiments, which can reveal the dominant geometrical feature for future risk assessment.Methods. According to Taguchi's method of design of experiment (DoE), the left main stem (LMS) length (lLMS), curvature (kLMS), diameter (dLMS) and the bifurcation angle between left anterior descending (LAD) and left circumflex (LCx) artery (αLAD-LCx) of two reconstructed patient-specific left coronary arteries (LCA) were varied in three levels to create L9 orthogonal array. Computational fluid dynamic (CFD) simulations with physiological boundary conditions were performed on the resulting eighteen LCA models. Average helicity intensity (h2) and relative atheroprone area (RAA) of near-wall hemodynamic descriptors were analyzed.Results. The proximal LAD (LADproximal) was identified to be the most atheroprone region of the left coronary artery due to higherh2,large RAA of time averaged wall shear stress (TAWSS < 0.4 Pa), oscillatory shear index (OSI ∼ 0.5) and relative residence time (RRT > 4.17 Pa-1). In both patient-specific cases, based onh2and TAWSS,dlmsis the dominant geometric parameter while based on OSI and RRT,αLAD-LCxis the dominant one influencing hemodynamic condition in proximal LAD (p< 0.05). Based on RRT, the rank of the geometrical factors is:αLAD-LCx>dLMS>lLMS>kLMS, indicating thatαLAD-LCxis the most dominant geometrical factor affecting hemodynamics at proximal LAD which may influence atherosclerosis.Conclusion. The proposed identification of the rank of geometrical features of LCA and the dominant feature may assist clinicians in predicting the possibility of atherosclerosis, of an individual, long before it will occur. This study can further be translated to be used to rank the influence of several arterial geometrical features at different arterial locations to explore detailed relationships between the arterial geometrical features and local hemodynamics.

Improving the 3D Printability of Sugar Glass to Engineer Sacrificial Vascular Templates

A prominent obstacle in scaling up tissue engineering technologies for human applications is engineering an adequate supply of oxygen and nutrients throughout artificial tissues. Sugar glass has emerged as a promising 3D-printable, sacrificial material that can be used to embed perfusable networks within cell-laden matrices to improve mass transfer. To characterize and optimize a previously published sugar ink, we investigated the effects of sucrose, glucose, and dextran concentration on the glass transition temperature (Tg), printability, and stability of 3D-printed sugar glass constructs. We identified a sucrose ink formulation with a significantly higher Tg (40.0 ± 0.9°C) than the original formulation (sucrose-glucose blend, Tg = 26.2 ± 0.4°C), which demonstrated a pronounced improvement in printability, resistance to bending, and final print stability, all without changing dissolution kinetics and decomposition temperature. This formulation allowed printing of 10-cm-long horizontal cantilever filaments, which can enable the printing of complex vascular segments along the x-, y-, and z-axes without the need for supporting structures. Vascular templates with a single inlet and outlet branching into nine channels were 3D printed using the improved formulation and subsequently used to generate perfusable alginate constructs. The printed lattice showed high fidelity with respect to the input geometry, although with some channel deformation after alginate casting and gelation-likely due to alginate swelling. Compared with avascular controls, no significant acute cytotoxicity was noted when casting pancreatic beta cell-laden alginate constructs around improved ink filaments, whereas a significant decrease in cell viability was observed with the original ink. The improved formulation lends more flexibility to sugar glass 3D printing by facilitating the fabrication of larger, more complex, and more stable sacrificial networks. Rigorous characterization and optimization methods for improving sacrificial inks may facilitate the fabrication of functional cellular constructs for tissue engineering, cellular biology, and other biomedical applications.

Association of retinal microvascular density and complexity with incident coronary heart disease

BACKGROUND AND AIMS

The high mortality rate and huge disease burden of coronary heart disease (CHD) highlight the importance of its early detection and timely intervention. Given the non-invasive nature of fundus photography and recent development in the quantification of retinal microvascular parameters with deep learning techniques, our study aims to investigate the association between incident CHD and retinal microvascular parameters.

METHODS

UK Biobanks participants with gradable fundus images and without a history of diagnosed CHD at recruitment were included for analysis. A fully automated artificial intelligence system was used to extract quantitative measurements that represent the density and complexity of the retinal microvasculature, including fractal dimension (Df), number of vascular segments (NS), vascular skeleton density (VSD) and vascular area density (VAD).

RESULTS

A total of 57,947 participants (mean age 55.6 ± 8.1 years; 56% female) without a history of diagnosed CHD were included. During a median follow-up of 11.0 (interquartile range, 10.88 to 11.19) years, 3211 incident CHD events occurred. In multivariable Cox proportional hazards models, we found decreasing Df (adjusted HR = 0.80, 95% CI, 0.65-0.98, p = 0.033), lower NS of arteries (adjusted HR = 0.69, 95% CI, 0.54-0.88, p = 0.002) and venules (adjusted HR = 0.77, 95% CI, 0.61-0.97, p = 0.024), and reduced arterial VSD (adjusted HR = 0.72, 95% CI, 0.57-0.91, p = 0.007) and venous VSD (adjusted HR = 0.78, 95% CI, 0.62-0.98, p = 0.034) were related to an increased risk of incident CHD.

CONCLUSIONS

Our study revealed a significant association between retinal microvascular parameters and incident CHD. As the lower complexity and density of the retinal vascular network may indicate an increased risk of incident CHD, this may empower its prediction with the quantitative measurements of retinal structure.

The effects of axial twisting and material non-symmetry on arterial bent buckling

Artery buckling occurs due to hypertensive lumen pressure or reduced axial tension and other pathological conditions. Since arteries in vivo often experience axial twisting and the collagen fiber alignment in the arterial wall may become nonsymmetric, it is imperative to know how axial twisting and nonsymmetric collagen alignment would affect the buckling behavior of arteries. To this end, the objective of this study was to determine the effect of axial twisting and nonsymmetric collagen fiber distribution on the critical pressure of arterial bent buckling. The buckling model analysis was generalized to incorporate an axial twist angle and nonsymmetric fiber alignment. The effect of axial twisting on the critical pressure was simulated and experimentally tested in a group of porcine carotid arteries. Our results showed that axial twisting tends to reduce the critical pressure depending on the axial stretch ratio and twist angle. In addition, nonsymmetric fiber alignment reduces the critical pressure. Experimental results confirmed that a twist angle of 90° reduces the critical pressure significantly (p < 0.05). It was concluded that axial twisting and non-axisymmetric collagen fibers distribution could make arteries prone to bent buckling. These results enrich our understanding of artery buckling and vessel tortuosity. The model analysis and results could also be applicable to other fiber reinforced tubes under lumen pressure and axial twisting.

Associations of arsenic exposure with blood pressure and platelet indices in pregnant women: A cross-sectional study in Wuhan, China

BACKGROUND

Environmental inorganic arsenic (iAs) exposure is potentially related to abnormal blood pressure (BP) changes and abnormal platelet activation. However, limited epidemiological studies have explored the impacts of iAs exposure on platelet change mediated by BP, especially for pregnant women.

OBJECTIVES

Our purpose was to investigate the associations of arsenic exposure with blood pressure and platelet indices among pregnant women.

METHODS

The present study population included 765 pregnant women drawn from a prospective birth cohort study in Wuhan, China, recruited between October 2013 and April 2016. Urine sampled in the second trimester were used to assess arsenic species concentrations. The relative distribution of urinary arsenic species was used to measure human methylation capacity. BP parameters and platelet indices originated from the medical record. We applied multivariable linear regression models to explore the cross-sectional relationships between urinary arsenic metabolites, BP parameters, and platelet indices. We utilized mediation analysis to investigate the impacts of arsenic exposure on platelet indices through BP as mediator variables.

RESULTS

We observed significant positive correlations between iAs and systolic BP (SBP), diastolic BP (DBP), and mean arterial pressure (MAP). Pregnant women with higher methylation capacity to metabolize iAs characterized by higher secondary methylation index (SMI) and total methylation index (TMI) had a more significant reduction in SBP, DBP, and MAP. Pregnant women with higher DBP and MAP had higher platelet counts (PLC). A decreased PLC was found in subjects wither higher SMI. Additionally, SMI was negatively linked to PLC mediated through MAP.

CONCLUSIONS

Obtained results suggested that higher methylation capacity to metabolize iAs might contribute to decreased PLC among pregnant women, and MAP might mediate the influence of SMI on PLC.

Age-Related Tortuosity of Carotid and Vertebral Arteries: Quantitative Evaluation With MR Angiography

Background and Purpose

The vascular tortuosity (VT) of the internal carotid artery (ICA), and vertebral artery (VA) can impact blood flow and neuronal function. However, few studies involved quantitative investigation of VT based on magnetic resonance imaging (MRI). The main purpose of our study was to evaluate the age and gender effects on ICA and VA regarding the tortuosity and flow changes by applying automatic vessel segmentation, centerline tracking, and phase mapping on MR angiography.

Methods

A total of 247 subjects (86 males and 161 females) without neurological diseases participated in this study. All subjects obtained T1-weighted MRI, 3D time-of-flight MR angiography, and 2D phase-contrast (PC) MRI scans. To generate quantitative tortuosity metrics from TOF images, the vessel segmentation and centerline tracking were implemented based on Otsu thresholding and fast marching algorithms, respectively. Blood flow and velocity were measured using PC MRI. Among the 247 subjects, 144 subjects (≤ 60 years, 49 males/95 females) were categorized as the young group; 103 subjects (>60 years, 37 males/66 females) were categorized as the old group.

Results

Independent t-test showed that older subjects had higher tortuosity metrics, whereas lower blood flow and velocity than young subjects (p < 0.0025, Bonferroni-corrected). Cerebral blood flow calculated using the sum flux of four target arteries normalized by the brain mass also showed significantly lower values in older subjects (p < 0.001). The age was observed to be positively correlated with the VT metrics. Compared to the males, the females demonstrated higher geometric indices within VAs as well as faster age-related vascular profile changes. After adjusting age and gender as covariates, maximum blood velocity is negatively correlated with geometric measurements. No association was observed between blood flux and geometric measures.

Conclusions

Vascular auto-segmentation, centerline tracking, and phase mapping provide promising quantitative assessments of tortuosity and its effects on blood flow. The neck arteries demonstrate quantifiable and significant age-related morphological and hemodynamic alterations. Moreover, females showed more distinct vascular changes with age. Our work is built upon a comprehensive quantitative investigation of a large cohort of populations covering adult lifespan using MRI, the results can serve as reference ranges of each decade in the general population.

Models of Shear-Induced Platelet Activation and Numerical Implementation With Computational Fluid Dynamics Approaches

Shear-induced platelet activation is one of the critical outcomes when blood is exposed to elevated shear stress. Excessively activated platelets in the circulation can lead to thrombus formation and platelet consumption, resulting in serious adverse events such as thromboembolism and bleeding. While experimental observations reveal that it is related to the shear stress level and exposure time, the underlying mechanism of shear-induced platelet activation is not fully understood. Various models have been proposed to relate shear stress levels to platelet activation, yet most are modified from the empirically calibrated power-law model. Newly developed multiscale platelet models are tested as a promising approach to capture a single platelet's dynamic shape during activation, but it would be computationally expensive to employ it for a large-scale analysis. This paper summarizes the current numerical models used to study the shear-induced platelet activation and their computational applications in the risk assessment of a particular flow pattern and clot formation prediction.

Characterizing the Mechanical Performance of a Bare-Metal Stent with an Auxetic Cell Geometry

This study develops and characterizes the distinctive mechanical features of a stainless-steel metal stent with a tailored structure. A high-precision femtosecond laser was used to micromachine a stent with re-entrant hexagonal (auxetic) cell geometry. We then characterized its mechanical behavior under various mechanical loadings using in vitro experiments and through finite element analysis. The stent properties, such as the higher capability of the stent to bear upon bending, exceptional advantage at elevated levels of twisting angles, and proper buckling, all ensured a preserved opening to maintain the blood flow. The outcomes of this preliminary study present a potential design for a stent with improved physiologically relevant mechanical conditions such as longitudinal contraction, radial strength, and migration of the stent.

The effect of turbulence modelling on the assessment of platelet activation

Pathological platelet activation by abnormal shear stresses is regarded as a main clinical complication in recipients of cardiovascular mechanical devices. In order to improve their performance computational fluid dynamics (CFD) are used to evaluate flow fields and related shear stresses. CFD models are coupled with mathematical models that describe the relation between fluid dynamics variables, and in particular shear stresses, and the platelet activation state (PAS). These models typically use a Lagrangian approach to compute the shear stresses along possible platelet trajectories. However, in the case of turbulent flow, the choice of the proper turbulence closure is still debated for both concerning its effect on shear stress calculation and Lagrangian statistics. In this study different numerical simulations of the flow through a mechanical heart valve were performed and then compared in terms of Eulerian and Lagrangian quantities: a direct numerical simulation (DNS), a large eddy simulation (LES), two Reynolds-averaged Navier-Stokes (RANS) simulations (SST k-ω and RSM) and a "laminar" (no turbulence modelling) simulation. Results exhibit a large variability in the PAS assessment depending on the turbulence model adopted. "Laminar" and RSM estimates of platelet activation are about 60% below DNS, while LES is 16% less. Surprisingly, PAS estimated from the SST k- ω velocity field is only 8% less than from DNS data. This appears more artificial than physical as can be inferred after comparing frequency distributions of PAS and of the different Lagrangian variables of the mechano-biological model of platelet activation. Our study indicates how much turbulence closures may affect platelet activation estimates, in comparison to an accurate DNS, when assessing blood damage in blood contacting devices.

Retinal arteriolar tortuosity and fractal dimension are associated with long-term cardiovascular outcomes in people with type 2 diabetes

AIMS/HYPOTHESIS

Our aim was to determine whether quantitative retinal traits in people with type 2 diabetes are independently associated with incident major cardiovascular events including CHD and stroke.

METHODS

A total of 1066 men and women with type 2 diabetes, aged 65-74 years, were followed up over 8 years in the population-based Edinburgh Type 2 Diabetes Study. Using retinal photographs taken at baseline and specialist software, a number of quantitative retinal traits were measured, including arteriolar and venular widths and tortuosity as well as fractal dimension (a measure of the branching pattern complexity of the retinal vasculature network). Incident CHD events occurring during follow-up included fatal and non-fatal myocardial infarction, first episodes of angina and coronary interventions for CHD. Incident cerebrovascular events included fatal and non-fatal stroke or transient ischaemic attack. Cox proportional hazard regression analyses were performed to identify the association of the retinal traits with cardiovascular events in the population with retinal data available (n = 1028).

RESULTS

A total of 200 participants had an incident cardiovascular event (139 CHD and 61 cerebrovascular events). Following adjustment for age and sex, arteriolar tortuosity and fractal dimension were associated with cerebrovascular events (HR 1.27 [95% CI 1.02, 1.58] and HR 0.74 [95% CI 0.57, 0.95], respectively), including with stroke alone (HR 1.30 [95% CI 1.01, 1.66] and HR 0.73 [95% CI 0.56, 0.97], respectively). These associations persisted after further adjustment for established cardiovascular risk factors (HR 1.26 [95% CI 1.01, 1.58] and HR 0.73 [95% CI 0.56, 0.94], respectively). Associations generally reduced in strength after a final adjustment for the presence of diabetic retinopathy, but the association of fractal dimension with incident cerebrovascular events and stroke retained statistical significance (HR 0.73 [95% CI 0.57, 0.95] and HR 0.72 [95% CI 0.54, 0.97], respectively). Associations of retinal traits with CHD were generally weak and showed no evidence of statistical significance.

CONCLUSIONS/INTERPRETATION

Arteriolar tortuosity and fractal dimension were associated with incident cerebrovascular events, independent of a wide range of traditional cardiovascular risk factors including diabetic retinopathy. These findings suggest potential for measurements of early retinal vasculature change to aid in the identification of people with type 2 diabetes who are at increased risk from stroke.

Impact of Coronary Artery Tortuosity on Outcomes Following Stenting: A Pooled Analysis From 6 Trials

OBJECTIVES

The authors sought to determine whether coronary artery tortuosity negatively affects clinical outcomes after stent implantation.

BACKGROUND

Coronary artery tortuosity is a common angiographic finding and has been associated with increased rates of early and late major adverse events after balloon angioplasty.

METHODS

Individual patient data from 6 prospective, randomized stent trials were pooled. Outcomes at 30 days and 5 years following percutaneous coronary intervention of a single coronary lesion were analyzed according to the presence or absence of moderate/severe vessel tortuosity, as determined by an angiographic core laboratory. The primary endpoint was target vessel failure (TVF) (composite of cardiac death, target vessel-related myocardial infarction [TV-MI], or ischemia-driven target vessel revascularization [ID-TVR]).

RESULTS

A total of 6,951 patients were included, 729 of whom (10.5%) underwent percutaneous coronary intervention in vessels with moderate/severe tortuosity. At 30 days, TVF was more frequent in patients with versus without moderate/severe tortuosity (3.8% vs. 2.4%; hazard ratio [HR]: 1.64; 95% confidence interval [CI]: 1.09 to 2.46; p = 0.02), a difference driven by a higher rate of TV-MI. At 5 years, TVF remained increased in patients with moderate/severe tortuosity (p = 0.003), driven by higher rates of TV-MI (p = 0.003) and ID-TVR (p = 0.01). Definite stent thrombosis was also greater in patients with versus without moderate/severe tortuosity (1.9% vs. 1.0%; HR: 1.86; 95% CI: 1.02 to 3.39; p = 0.04). After adjustment for baseline covariates, moderate/severe vessel tortuosity was independently associated with TV-MI and ID-TVR at 5 years (p = 0.04 for both).

CONCLUSIONS

Stent implantation in vessels with moderate/severe coronary artery tortuosity is associated with increased rates of TVF due to greater rates of TV-MI and ID-TVR.

Associations of urinary dichloroacetic acid and trichloroacetic acid exposure with platelet indices: Exploring the mediating role of blood pressure in the general population

Human exposure to drinking water disinfection by-products (DBPs) is potentially linked to high blood pressure (BP), which may be associated with abnormal platelet activation. This study investigated whether the relationship between DBP exposure with platelet change was mediated by BP. DBP biomarkers, such as urinary dichloroacetic acid (DCAA) and trichloroacetic acid (TCAA), BP and platelet indices from 505 adults from a hospital in Shijiazhuang, China were measured. The cross-sectional associations among DCAA and TCAA exposure, BP and platelet indices were explored through multivariable linear regressions, and the mediation effect of BP was evaluated using the Sobel-Goodman test. We observed that DCAA and TCAA were positively associated with systolic BP (all p for trends < 0.01), which was positively associated with platelet count (PLC) (p for trend < 0.05). Mediation analysis indicated that systolic BP fully mediated the associations of DCAA and TCAA with PLC. When BP was controlled, a previously inverse significant relation between DCAA and platelet distribution width (PDW) remained significant (p < 0.05). Obtained results suggested that exposure to DCAA may contribute to decreased PDW in humans. Systolic BP is a possible mediator of the association between DCAA exposure and PLC. TCAA may indirectly positively affect PLC by increasing systolic BP.

Tortuosity-powered microfluidic device for assessment of thrombosis and antithrombotic therapy in whole blood

Accurate assessment of blood thrombosis and antithrombotic therapy is essential for the management of patients in a variety of clinical conditions, including surgery and on extracorporeal life support. However, current monitoring devices do not measure the effects of hemodynamic forces that contribute significantly to coagulation, platelet function and fibrin formation. This limits the extent to which current assays can predict clotting status in patients. Here, we demonstrate that a biomimetic microfluidic device consisting stenosed and tortuous arteriolar vessels would analyze blood clotting under flow, while requiring a small blood volume. When the device is connected to an inline pressure sensor a clotting time analysis is applied, allowing for the accurate measurement of coagulation, platelets and fibrin content. Furthermore, this device detects a prolonged clotting time in clinical blood samples drawn from pediatric patients on extracorporeal membrane oxygenation receiving anticoagulant therapy. Thus, this tortuosity activated microfluidic device could lead to a more quantitative and rapid assessment of clotting disorders and their treatment.

Instability of Incompatible Bilayered Soft Tissues and the Role of Interface Conditions

Mechanical stability analysis is instructive in explaining biological processes like morphogenesis, organogenesis, and pathogenesis of soft tissues. Consideration of the layered, residually stressed structure of tissues, requires accounting for the joint effects of interface conditions and layer incompatibility. This paper is concerned with the influence of imposed rate (incremental) interface conditions (RICs) on critical loads in soft tissues, within the context of linear bifurcation analysis. Aiming at simplicity, we analyze a model of bilayered isotropic hyperelastic (neo-Hookean) spherical shells with residual stresses generated by “shrink-fitting” two perfectly bonded layers with radial interfacial incompatibility. This setting allows a comparison between available, seemingly equivalent, interface conditions commonly used in the literature of layered media stability. We analytically determine the circumstances under which the interface conditions are equivalent or not, and numerically demonstrate significant differences between interface conditions with increasing level of layer incompatibility. Differences of more than tenfold in buckling and 30% in inflation instability critical loads are recorded using the different RICs. Contrasting instability characteristics are also revealed using the different RICs in the presence of incompatibility: inflation instability can occur before pressure maximum, and spontaneous instability may be excluded for thin shells. These findings are relevant to the growing body of stability studies of layered and residually stressed tissues. The impact of interface conditions on critical thresholds is significant in studies that use concepts of instability to draw conclusions about the normal development and the pathologies of tissues like arteries, esophagus, airways, and the brain.

Method for the simulation of blood platelet shape and its evolution during activation

We present a simple physically based quantitative model of blood platelet shape and its evolution during agonist-induced activation. The model is based on the consideration of two major cytoskeletal elements: the marginal band of microtubules and the submembrane cortex. Mathematically, we consider the problem of minimization of surface area constrained to confine the marginal band and a certain cellular volume. For resting platelets, the marginal band appears as a peripheral ring, allowing for the analytical solution of the minimization problem. Upon activation, the marginal band coils out of plane and forms 3D convoluted structure. We show that its shape is well approximated by an overcurved circle, a mathematical concept of closed curve with constant excessive curvature. Possible mechanisms leading to such marginal band coiling are discussed, resulting in simple parametric expression for the marginal band shape during platelet activation. The excessive curvature of marginal band is a convenient state variable which tracks the progress of activation. The cell surface is determined using numerical optimization. The shapes are strictly mathematically defined by only three parameters and show good agreement with literature data. They can be utilized in simulation of platelets interaction with different physical fields, e.g. for the description of hydrodynamic and mechanical properties of platelets, leading to better understanding of platelets margination and adhesion and thrombus formation in blood flow. It would also facilitate precise characterization of platelets in clinical diagnosis, where a novel optical model is needed for the correct solution of inverse light-scattering problem.

Fluid-structure interaction modeling of aneurysmal arteries under steady-state and pulsatile blood flow: a stability analysis

Tortuous aneurysmal arteries are often associated with a higher risk of rupture but the mechanism remains unclear. The goal of this study was to analyze the buckling and post-buckling behaviors of aneurysmal arteries under pulsatile flow. To accomplish this goal, we analyzed the buckling behavior of model carotid and abdominal aorta with aneurysms by utilizing fluid-structure interaction (FSI) method with realistic waveforms boundary conditions. FSI simulations were done under steady-state and pulsatile flow for normal (1.5) and reduced (1.3) axial stretch ratios to investigate the influence of aneurysm, pulsatile lumen pressure and axial tension on stability. Our results indicated that aneurysmal artery buckled at the critical buckling pressure and its deflection nonlinearly increased with increasing lumen pressure. Buckling elevates the peak stress (up to 118%). The maximum aneurysm wall stress at pulsatile FSI flow was (29%) higher than under static pressure at the peak lumen pressure of 130 mmHg. Buckling results show an increase in lumen shear stress at the inner side of the maximum deflection. Vortex flow was dramatically enlarged with increasing lumen pressure and artery diameter. Aneurysmal arteries are more susceptible than normal arteries to mechanical instability which causes high stresses in the aneurysm wall that could lead to aneurysm rupture.

Artefactual angulated lesion on angiography: A case report and review of literature

We present a case of a patient who presented with chest pain, and on diagnostic coronary angiography appeared to have a grossly angulated yet significant coronary stenosis. This was proven to be an artefactual appearance on further assessment with intravascular ultrasound imaging. We describe the causes and associations of coronary tortuosity with other arteriopathy, and highlight challenges in the interpretation of tortuous vessels to accurately assess luminal narrowing and suitability for coronary intervention. We describe a case of artefactual coronary stenosis, and its thorough assessment with intravascular ultrasound. A literature review describes the pathogenesis of coronary tortuosity, and links with other cardiovascular disease. Readers will gain an understanding of the challenge in determining the severity of luminal stenosis based on coronary angiography alone in tortuous coronary anatomy, the use of intravascular ultrasound in this setting, and the allied vasculopathies of interest.

Age-related Impairment of Vascular Structure and Functions

Among age-related diseases, cardiovascular and cerebrovascular diseases are major causes of death. Vascular dysfunction is a key characteristic of these diseases wherein age is an independent and essential risk factor. The present work will review morphological alterations of aging vessels in-depth, which includes the discussion of age-related microvessel loss and changes to vasculature involving the capillary basement membrane, intima, media, and adventitia as well as the accompanying vascular dysfunctions arising from these alterations.

Arterial wall remodeling under sustained axial twisting in rats

Blood vessels often experience torsion along their axes and it is essential to understand their biological responses and wall remodeling under torsion. To this end, a rat model was developed to investigate the arterial wall remodeling under sustained axial twisting in vivo. Rat carotid arteries were twisted at 180° along the longitudinal axis through a surgical procedure and maintained for different durations up to 4weeks. The wall remodeling in these twisted arteries was examined using histology, immunohistochemistry and fluorescent microscopy. Our data showed that arteries remodeled under twisting in a time-dependent manner during the 4weeks post-surgery. Cell proliferation, MMP-2 and MMP-9 expressions, medial wall thickness and lumen diameter increased while collagen to elastin ratio decreased. The size and number of internal elastic lamina fenestrae increased with elongated shapes, while the endothelial cells elongated and aligned towards the blood flow direction gradually. These results demonstrated that sustained axial twisting results in artery remodeling in vivo. The rat carotid artery twisting model is an effective in vivo model for studying arterial wall remodeling under long-term torsion. These results enrich our understanding of vascular biology and arterial wall remodeling under mechanical stresses.

Twist buckling of veins under torsional loading

Veins are often subjected to torsion and twisted veins can hinder and disrupt normal blood flow but their mechanical behavior under torsion is poorly understood. The objective of this study was to investigate the twist deformation and buckling behavior of veins under torsion. Twist buckling tests were performed on porcine internal jugular veins (IJVs) and human great saphenous veins (GSVs) at various axial stretch ratio and lumen pressure conditions to determine their critical buckling torques and critical buckling twist angles. The mechanical behavior under torsion was characterized using a two-fiber strain energy density function and the buckling behavior was then simulated using finite element analysis. Our results demonstrated that twist buckling occurred in all veins under excessive torque characterized by a sudden kink formation. The critical buckling torque increased significantly with increasing lumen pressure for both porcine IJV and human GSV. But lumen pressure and axial stretch had little effect on the critical twist angle. The human GSVs are stiffer than the porcine IJVs. Finite element simulations captured the buckling behavior for individual veins under simultaneous extension, inflation, and torsion with strong correlation between predicted critical buckling torques and experimental data (R²=0.96). We conclude that veins can buckle under torsion loading and the lumen pressure significantly affects the critical buckling torque. These results improve our understanding of vein twist behavior and help identify key factors associated in the formation of twisted veins.

Numerical Simulation of Thrombotic Occlusion in Tortuous Arterioles

Tortuous microvessels alter blood flow and stimulate thrombosis but the physical mechanisms are poorly understood. Both tortuous microvessels and abnormally large platelets are seen in diabetic patients. Thus, the objective of this study was to determine the physical effects of arteriole tortuosity and platelet size on the microscale processes of thrombotic occlusion in microvessels. A new lattice-Boltzmann method-based discrete element model was developed to simulate the fluid flow field with fluid-platelet coupling, platelet interactions, thrombus formation, and thrombotic occlusion in tortuous arterioles. Our results show that vessel tortuosity creates high shear stress zones that activate platelets and stimulate thrombus formation. The growth rate depends on the level of tortuosity and the pressure and flow boundary conditions. Once thrombi began to form, platelet collisions with thrombi and subsequent activations were more important than tortuosity level. Thrombus growth narrowed the channel and reduced the flow rate. Larger platelet size leads to quicker decrease of flow rate due to larger thrombi that occluded the arteriole. This study elucidated the important roles that tortuosity and platelet size play in thrombus formation and occlusion in arterioles.

Computational simulation of platelet interactions in the initiation of stent thrombosis due to stent malapposition

Coronary stenting is one of the most commonly used approaches to open coronary arteries blocked due to atherosclerosis. Stent malapposition can induce thrombosis but the microscopic process is poorly understood. The objective of this study was to determine the platelet-level process by which different extents of stent malapposition affect the initiation of stent thrombosis. We utilized a discrete element model to computationally simulate the transport, adhesion, and activation of thousands of individual platelets and red blood cells during thrombus initiation in stented coronary arteries. Simulated arteries contained a malapposed stent with a specified gap distance (0, 10, 25, 50, or 200 μm) between the struts and endothelium. Platelet-level details of thrombus formation near the proximal-most strut were measured during the simulations. The relationship between gap distance and amount of thrombus in the artery varied depending on different conditions (e.g., amount of dysfunctional endothelium, shear-induced activation of platelets, and thrombogenicity of the strut). Without considering shear-induced platelet activation, the largest gap distance (200 μm) produced no recirculation and less thrombus than the smallest two gap distances (0 and 10 μm) that created recirculation downstream of the strut. However, with the occurrence of shear-induced platelet activation, the largest gap distance produced more thrombus than the two smallest gap distances, but less thrombus than an intermediate gap distance (25 μm). A large gap distance was not necessarily the most thrombogenic, in contrast to implications of some computational fluid dynamics studies. The severity of stent malapposition affected initial stent thrombosis differently depending on various factors related to fluid recirculation, platelet trajectories, shear stress, and endothelial condition.

Associations between Retinal Markers of Microvascular Disease and Cognitive Impairment in Newly Diagnosed Type 2 Diabetes Mellitus: A Case Control Study

OBJECTIVE

To investigate associations between retinal microvascular changes and cognitive impairment in newly diagnosed type 2 diabetes mellitus.

DESIGN

Case control study.

SETTING

A primary care cohort with newly diagnosed type 2 diabetes mellitus.

METHODS

For this analysis, we compared 69 cases with lowest decile scores (for the cohort) on the Modified Telephone Interview for Cognitive Status and 68 controls randomly selected from the remainder of the cohort. Retinal images were rated and the following measures compared between cases and controls: retinal vessel calibre, arterio-venous ratio, retinal fractal dimension, and simple and curvature retinal vessel tortuosity.

RESULTS

Total and venular (but not arteriolar) simple retinal vessel tortuosity levels were significantly higher in cases than controls (t = 2.45, p = 0.015; t = 2.53, p = 0.013 respectively). The associations persisted after adjustment for demographic factors, retinopathy, neuropathy, obesity and blood pressure. There were no other significant differences between cases and controls in retinal measures.

CONCLUSIONS

A novel association was found between higher venular tortuosity and cognitive impairment in newly diagnosed type 2 diabetes mellitus. This might be accounted for by factors such as hypoxia, thrombus formation, increased vasoendothelial growth factor release and inflammation affecting both the visible retinal and the unobserved cerebral microvasculature.

Coagulation Factor XI Promotes Distal Platelet Activation and Single Platelet Consumption in the Bloodstream Under Shear Flow

OBJECTIVE

Coagulation factor XI (FXI) has been shown to contribute to thrombus formation on collagen or tissue factor-coated surfaces in vitro and in vivo by enhancing thrombin generation. Whether the role of the intrinsic pathway of coagulation is restricted to the local site of thrombus formation is unknown. This study was aimed to determine whether FXI could promote both proximal and distal platelet activation and aggregate formation in the bloodstream.

APPROACH AND RESULTS

Pharmacological blockade of FXI activation or thrombin activity in blood did not affect local platelet adhesion, yet reduced local platelet aggregation, thrombin localization, and fibrin formation on immobilized collagen and tissue factor under shear flow, ex vivo. Downstream of the thrombus formed on immobilized collagen or collagen and 10 pmol/L tissue factor, platelet CD62P expression, microaggregate formation, and progressive platelet consumption were significantly reduced in the presence of FXI function-blocking antibodies or a thrombin inhibitor in a shear rate- and time-dependent manner. In a non-human primate model of thrombus formation, we found that inhibition of FXI reduced single platelet consumption in the bloodstream distal to a site of thrombus formation.

CONCLUSIONS

This study demonstrates that the FXI-thrombin axis contributes to distal platelet activation and procoagulant microaggregate formation in the blood flow downstream of the site of thrombus formation. Our data highlight FXI as a novel therapeutic target for inhibiting distal platelet consumption without affecting proximal platelet adhesion.

Murine Kidney Transplant Technique

The first mouse kidney transplant technique was published in 1973(1) by the Russell laboratory. Although it took some years for other labs to become proficient in and utilize this technique, it is now widely used by many laboratories around the world. A significant refinement to the original technique using the donor aorta to form the arterial anastomosis instead of the renal artery was developed and reported in 1993 by Kalina and Mottram (2) with a further advancement coming from the same laboratory in 1999 (3). While one can become proficient in this model, a search of the literature reveals that many labs still experience a high proportion of graft loss due to arterial thrombosis. We describe here a technique that was devised in our laboratory that vastly reduces the arterial thrombus reported by others (4,5). This is achieved by forming a heel-and-toe cuff of the donor infra-renal aorta that facilitates a larger anastomosis and straighter blood flow into the kidney.

Age-related changes in pial arterial structure and blood flow in mice

Age-related cerebral blood flow decreases are thought to deteriorate cognition and cause senescence, although the related mechanism is unclear. To investigate the relationships between aging and changes in cerebral blood flow and vasculature, we obtained fluorescence images of young (2-month-old) and old (12-month-old) mice using indocyanine green (ICG). First, we found that the blood flow in old mice's brains is lower than that in young mice and that old mice had more curved pial arteries and fewer pial artery junctions than young mice. Second, using Western blotting, we determined that the ratio of collagen to elastin (related to cerebral vascular wall distensibility) increased with age. Finally, we found that the peak ICG intensity and blood flow index decreased, whereas the mean transit time increased, with age in the middle cerebral artery and superior sagittal sinus. Age-related changes in pial arterial structure and composition, concurrent with the observed changes in the blood flow parameters, suggest that age-related changes in the cerebral vasculature structure and distensibility may induce altered brain blood flow.

Partial eNOS deficiency causes spontaneous thrombotic cerebral infarction, amyloid angiopathy and cognitive impairment

Background

Cerebral infarction due to thrombosis leads to the most common type of stroke and a likely cause of age-related cognitive decline and dementia. Endothelial nitric oxide synthase (eNOS) generates NO, which plays a crucial role in maintaining vascular function and exerting an antithrombotic action. Reduced eNOS expression and eNOS polymorphisms have been associated with stroke and Alzheimer’s disease (AD), the most common type of dementia associated with neurovascular dysfunction. However, direct proof of such association is lacking. Since there are no reports of complete eNOS deficiency in humans, we used heterozygous eNOS^+/- mice to mimic partial deficiency of eNOS, and determine its impact on cerebrovascular pathology and perfusion of cerebral vessels.

Results

Combining cerebral angiography with immunohistochemistry, we found thrombotic cerebral infarctions in eNOS^+/- mice as early as 3–6 months of age but not in eNOS^+/+ mice at any age. Remarkably, vascular occlusions in eNOS^+/- mice were found almost exclusively in three areas: temporoparietal and retrosplenial granular cortexes, and hippocampus this distribution precisely matching the hypoperfused areas identified in preclinical AD patients. Moreover, progressive cerebral amyloid angiopaphy (CAA), blood brain barrier (BBB) breakdown, and cognitive impairment were also detected in aged eNOS^+/- mice.

Conclusions

These data provide for the first time the evidence that partial eNOS deficiency results in spontaneous thrombotic cerebral infarctions that increase with age, leading to progressive CAA and cognitive impairments. We thus conclude that eNOS^+/- mouse may represent an ideal model of ischemic stroke to address early and progressive damage in spontaneously-evolving chronic cerebral ischemia and thus, study vascular mechanisms contributing to vascular dementia and AD.

Electronic supplementary material

The online version of this article (doi:10.1186/s13024-015-0020-0) contains supplementary material, which is available to authorized users.

Revised Arterial Anastomosis for Improving Murine Kidney Transplant Outcomes

AIM

One of the most challenging research microsurgical techniques is the mouse kidney transplant however, very few laboratories have made use of this important model due to its difficulty. One of the main obstacles to utilizing this procedure is the high incidence of post-operative arterial thrombosis. We believe this is caused by the path in which blood is required to flow from the recipient abdominal aorta, via the donor recipient aorta and on into the renal artery creating a tortuous route and areas of turbulence, which are prone to thrombus formation and failure of the graft.

METHODS

We describe revised methods of donor artery recovery, whereby the traditional transection of the donor aorta is replaced with a heel and toe cuff, which is created by dividing the donor abdominal aorta obliquely across the face of the renal arterial ostium, which then provides for an arterial end-to-side anastomosis of a scale similar to that used for the heterotopic heart model. This technique produces an anastomosis that facilitates free blood flow from the recipient abdominal aorta at less than 90° thereby reducing the likelihood of thrombus formation.

RESULTS

Utilizing this new technique the incidence of arterial thrombosis has decreased from 35% to 0% (n = 20 and 24, respectively) with no change in ischemia times.

CONCLUSION

We describe a revised method of performing the arterial anastomosis during mouse kidney transplantation, which facilitates improved fluid dynamics by straightening the flow path for blood to the graft resulting in significantly reduced thrombus formation, excellent graft function, histology, and post-transplant survival.

SHEAR-INDUCED PLATELET ACTIVATION IN TORTUOUS CORONARY ARTERY: A NUMERICAL STUDY

High fluid shear stresses (FSSs) were observed in tortuous coronary arteries, especially during the strenuous exercise condition. Whether these high FSSs would enhance the shear-induced platelet activation is still unknown. A computational fluid dynamics (CFD) study was conducted to evaluate the impact of coronary tortuosity (CT) on the shear-induced platelet activation during various conditions. A patient-specific left anterior descending (LAD) coronary artery model (CT model) and the corresponding non tortuous model (nCT model) were reconstructed to perform three-dimensional CFD analysis. Lagrangian particle analysis was performed to further obtain the platelet activation state (PAS) of the platelet-like particles. No significant difference was observed between CT and nCT models on the PAS values reached by the platelet-like particles at all simulated conditions. PAS values for particles within both CT and nCT models were decreased during exercise conditions, as compared to those during the rest condition. These results confirmed that CT could not enhance the platelet activation even with extreme high FSSs existing at bend sections during the strenuous exercise condition, and the results also implied that high FSSs might not be the critical factor leading to the platelet activation during the strenuous exercise for persons without the coronary obstructive.

Stability of carotid artery under steady-state and pulsatile blood flow: a fluid-structure interaction study

It has been shown that arteries may buckle into tortuous shapes under lumen pressure, which in turn could alter blood flow. However, the mechanisms of artery instability under pulsatile flow have not been fully understood. The objective of this study was to simulate the buckling and post-buckling behaviors of the carotid artery under pulsatile flow using a fully coupled fluid-structure interaction (FSI) method. The artery wall was modeled as a nonlinear material with a two-fiber strain-energy function. FSI simulations were performed under steady-state flow and pulsatile flow conditions with a prescribed flow velocity profile at the inlet and different pressures at the outlet to determine the critical buckling pressure. Simulations were performed for normal (160 ml/min) and high (350 ml/min) flow rates and normal (1.5) and reduced (1.3) axial stretch ratios to determine the effects of flow rate and axial tension on stability. The results showed that an artery buckled when the lumen pressure exceeded a critical value. The critical mean buckling pressure at pulsatile flow was 17-23% smaller than at steady-state flow. For both steady-state and pulsatile flow, the high flow rate had very little effect (&lt;5%) on the critical buckling pressure. The fluid and wall stresses were drastically altered at the location with maximum deflection. The maximum lumen shear stress occurred at the inner side of the bend and maximum tensile wall stresses occurred at the outer side. These findings improve our understanding of artery instability in vivo.

Simulation of the microscopic process during initiation of stent thrombosis

OBJECTIVE

Coronary stenting is one of the most commonly used approaches to open coronary arteries blocked due to atherosclerosis. However, stent struts can induce stent thrombosis due to altered hemodynamics and endothelial dysfunction, and the microscopic process is poorly understood. The objective of this study was to determine the microscale processes during the initiation of stent thrombosis.

METHODS

We utilized a discrete element computational model to simulate the transport, collision, adhesion, and activation of thousands of individual platelets and red blood cells in thrombus formation around struts and dysfunctional endothelium.

RESULTS

As strut height increased, the area of endothelium activated by low shear stress increased, which increased the number of platelets in mural thrombi. These thrombi were generally outside regions of recirculation for shorter struts. For the tallest strut, wall shear stress was sufficiently low to activate the entire endothelium. With the entire endothelium activated by injury or denudation, the number of platelets in mural thrombi was largest for the shortest strut. The type of platelet activation (by high shear stress or contact with activated endothelium) did not greatly affect results.

CONCLUSIONS

During the initiation of stent thrombosis, platelets do not necessarily enter recirculation regions or deposit on endothelium near struts, as suggested by previous computational fluid dynamics simulations. Rather, platelets are more likely to deposit on activated endothelium outside recirculation regions and deposit directly on struts. Our study elucidated the effects of different mechanical factors on the roles of platelets and endothelium in stent thrombosis.

Mechanical instability of normal and aneurysmal arteries

Tortuous arteries associated with aneurysms have been observed in aged patients with atherosclerosis and hypertension. However, the underlying mechanism is poorly understood. The objective of this study was to determine the effect of aneurysms on arterial buckling instability and the effect of buckling on aneurysm wall stress. We investigated the mechanical buckling and post-buckling behavior of normal and aneurysmal carotid arteries and aorta's using computational simulations and experimental measurements to elucidate the interrelationship between artery buckling and aneurysms. Buckling tests were done in porcine carotid arteries with small aneurysms created using elastase treatment. Parametric studies were done for model aneurysms with orthotropic nonlinear elastic walls using finite element simulations. Our results demonstrated that arteries buckled at a critical buckling pressure and the post-buckling deflection increased nonlinearly with increasing pressure. The presence of an aneurysm can reduce the critical buckling pressure of arteries, although the effect depends on the aneurysm's dimensions. Buckled aneurysms demonstrated a higher peak wall stress compared to unbuckled aneurysms under the same lumen pressure. We conclude that aneurysmal arteries are vulnerable to mechanical buckling and mechanical buckling could lead to high stresses in the aneurysm wall. Buckling could be a possible mechanism for the development of tortuous aneurysmal arteries such as in the Loeys-Dietz syndrome.

Computation of Hemodynamics in Tortuous Left Coronary Artery: A Morphological Parametric Study

Coronary tortuosity (CT) would alter the local wall shear stress (WSS) and may become a risk factor for atherosclerosis. Here we performed a systematic computational study to relate CT morphological parameters to abnormal WSS, which is a predisposing factor to the formation of atherosclerotic lesions. Several idealized left coronary artery (LCA) models were created to conduct a series of morphological parametric studies, in which we concentrate on three specific morphological parameters, the center line radius (CLR), the bend angle (BA), and the length between two adjust bends (LBB). The time averaged WSS (TAWSS), the oscillatory shear index (OSI), and the time averaged WSS gradient (WSSGnd) were explored by using the computational fluid dynamics (CFD) method, in order to determine susceptible sites for the onset of early atherosclerosis. In addition, two realistic LCA models were reconstructed to further validate the finding's credibility. The CLR and LBB had great impact on the distributions of WSS-derived parameters, while the BA had minor impact on the hemodynamic of the tortuous arteries. Abnormal regions with low TAWSS (TAWSS < 0.5 Pa), high OSI (OSI > 0.1) and high WSSGnd (WSSGnd > 8) were observed at the inner wall of bend sections in the models with small CLR or small LBB. These findings were also confirmed in the realistic models. Severe CT with small CLR or LBB would lead to the formation of abnormal WSS regions at the bend sections and providing these regions with favorable conditions for the onset and/or progression of atherosclerosis.

Measuring, reversing, and modeling the mechanical changes due to the absence of Fibulin-4 in mouse arteries

Mice with a smooth muscle cell (SMC)-specific deletion of Fibulin-4 (SMKO) show decreased expression of SMC contractile genes, decreased circumferential compliance, and develop aneurysms in the ascending aorta. Neonatal administration of drugs that inhibit the angiotensin II pathway encourages the expression of contractile genes and prevents aneurysm development, but does not increase compliance in SMKO aorta. We hypothesized that multidimensional mechanical changes in the aorta and/or other elastic arteries may contribute to aneurysm pathophysiology. We found that the SMKO ascending aorta and carotid artery showed mechanical changes in the axial direction. These changes were not reversed by angiotensin II inhibitors, hence reversing the axial changes is not required for aneurysm prevention. Mechanical changes in the circumferential direction were specific to the ascending aorta; therefore, mechanical changes in the carotid do not contribute to aortic aneurysm development. We also hypothesized that a published model of postnatal aortic growth and remodeling could be used to investigate mechanisms behind the changes in SMKO aorta and aneurysm development over time. Dimensions and mechanical behavior of adult SMKO aorta were reproduced by the model after modifying the initial component material constants and the aortic dilation with each postnatal time step. The model links biological observations to specific mechanical responses in aneurysm development and treatment.

Effect of Red Blood Cells on Platelet Activation and Thrombus Formation in Tortuous Arterioles

Thrombosis is a major contributor to cardiovascular disease, which can lead to myocardial infarction and stroke. Thrombosis may form in tortuous microvessels, which are often seen throughout the human body, but the microscale mechanisms and processes are not well understood. In straight vessels, the presence of red blood cells (RBCs) is known to push platelets toward walls, which may affect platelet aggregation and thrombus formation. However in tortuous vessels, the effects of RBC interactions with platelets in thrombosis are largely unknown. Accordingly, the objective of this work was to determine the physical effects of RBCs, platelet size, and vessel tortuosity on platelet activation and thrombus formation in tortuous arterioles. A discrete element computational model was used to simulate the transport, collision, adhesion, aggregation, and shear-induced platelet activation of hundreds of individual platelets and RBCs in thrombus formation in tortuous arterioles. Results showed that high shear stress near the inner sides of curved arteriole walls activated platelets to initiate thrombosis. RBCs initially promoted platelet activation, but then collisions of RBCs with mural thrombi reduced the amount of mural thrombus and the size of emboli. In the absence of RBCs, mural thrombus mass was smaller in a highly tortuous arteriole compared to a less tortuous arteriole. In the presence of RBCs however, mural thrombus mass was larger in the highly tortuous arteriole compared to the less tortuous arteriole. As well, smaller platelet size yielded less mural thrombus mass and smaller emboli, either with or without RBCs. This study shed light on microscopic interactions of RBCs and platelets in tortuous microvessels, which have implications in various pathologies associated with thrombosis and bleeding.

Platelet size and density affect shear-induced thrombus formation in tortuous arterioles

Thrombosis accounts for 80% of deaths in patients with diabetes mellitus. Diabetic patients demonstrate tortuous microvessels and larger than normal platelets. Large platelets are associated with increased platelet activation and thrombosis, but the physical effects of large platelets in the microscale processes of thrombus formation are not clear. Therefore, the objective of this study was to determine the physical effects of mean platelet volume (MPV), mean platelet density (MPD) and vessel tortuosity on platelet activation and thrombus formation in tortuous arterioles. A computational model of the transport, shear-induced activation, collision, adhesion and aggregation of individual platelets was used to simulate platelet interactions and thrombus formation in tortuous arterioles. Our results showed that an increase in MPV resulted in a larger number of activated platelets, though MPD and level of tortuosity made little difference on platelet activation. Platelets with normal MPD yielded the lowest amount of mural thrombus. With platelets of normal MPD, the amount of mural thrombus decreased with increasing level of tortuosity but did not have a simple monotonic relationship with MPV. The physical mechanisms associated with MPV, MPD and arteriole tortuosity play important roles in platelet activation and thrombus formation.

Impact of coronary tortuosity on the coronary blood flow: a 3D computational study

Tortuous coronary arteries are commonly observed but the etiology and clinical importance are still unclear. Hemodynamic factors are vital modulators of the vascular structure and a full understanding of hemodynamic changes caused by the coronary tortuosity (CT) is meaningful for clinical researches. A three-dimensional computational fluid dynamic study was conducted to evaluate hemodynamic changes caused by the CT. Six idealized small sections of the left anterior descending coronary artery (LAD) with different levels of tortuosity were employed. The dynamic vessel motion was added to the three-dimensional tortuous coronary models to make the computational results more realistic. The rest and exercise conditions were modeled by specifying proper boundary conditions. Results showed that a low and oscillated wall shear stress (WSS) region was formed at the inner wall downstream of the bend section when the bend angle was larger than 120°. The resistance of the coronary arteries increased up to 92% due to the CT during exercise. A maximum increase of 96% was observed in the mean diastole driving pressure for the CT model as compared to the non-tortuous model during exercise. This study indicated that the severe CT may be a risk factor for atherosclerosis and may make the regulation of the blood flow ineffective during exercise.

Obstacles in haemocompatibility testing

ISO 10993-4 is an international standard describing the methods of testing of medical devices for interactions with blood for regulatory purpose. The complexity of blood responses to biomaterial surfaces and the variability of blood functions in different individuals and species pose difficulties in standardisation. Moreover, in vivo or in vitro testing, as well as the clinical relevance of certain findings, is still matter of debate. This review deals with the major remaining problems, including a brief explanation of surface interactions with blood, the current ISO 10993 requirements for testing, and the role of in vitro test models. The literature is reviewed on anticoagulation, shear rate, blood-air interfaces, incubation time, and the importance of evaluation of the surface area after blood contact. Two test categories deserve further attention: complement and platelet function, including the effects on platelets from adhesion proteins, venipuncture, and animal derived- blood. The material properties, hydrophilicity, and roughness, as well as reference materials, are discussed. Finally this review calls for completing the acceptance criteria in the ISO standard based on a panel of test results.

Mechanical buckling of arterioles in collateral development

Collateral arterioles enlarge in both diameter and length, and develop corkscrew-like tortuous patterns during remodeling. Recent studies showed that artery buckling could lead to tortuosity. The objective of this study was to determine arteriole critical buckling pressure and buckling pattern during arteriole remodeling. Arterioles were modeled as elastic cylindrical vessels with an elastic matrix support and underwent axial and radial growth. Our results demonstrated that arteriole critical buckling pressure decreased with increasing axial growth ratio and radius growth ratio, but increased with increasing wall thickness. Arteriole buckling mode number increased (wavelength decreased) with increasing axial growth ratio, but decreased with increasing radius growth ratio and wall thickness. Our study suggests that axial growth in arterioles makes them prone to buckling and that buckling leads to tortuous collaterals. These results shed light on the mechanism of collateral arteriole tortuosity.

Artery buckling: new phenotypes, models, and applications

Arteries are under significant mechanical loads from blood pressure, flow, tissue tethering, and body movement. It is critical that arteries remain patent and stable under these loads. This review summarizes the common forms of buckling that occur in blood vessels including cross-sectional collapse, longitudinal twist buckling, and bent buckling. The phenomena, model analyses, experimental measurements, effects on blood flow, and clinical relevance are discussed. It is concluded that mechanical buckling is an important issue for vasculature, in addition to wall stiffness and strength, and requires further studies to address the challenges. Studies of vessel buckling not only enrich vascular biomechanics but also have important clinical applications.

Mechanical buckling of artery under pulsatile pressure

Tortuosity that often occurs in carotid and other arteries has been shown to be associated with high blood pressure, atherosclerosis, and other diseases. However the mechanisms of tortuosity development are not clear. Our previous studies have suggested that arteries buckling could be a possible mechanism for the initiation of tortuous shape but artery buckling under pulsatile flow condition has not been fully studied. The objectives of this study were to determine the artery critical buckling pressure under pulsatile pressure both experimentally and theoretically, and to elucidate the relationship of critical pressures under pulsatile flow, steady flow, and static pressure. We first tested the buckling pressures of porcine carotid arteries under these loading conditions, and then proposed a nonlinear elastic artery model to examine the buckling pressures under pulsatile pressure conditions. Experimental results showed that under pulsatile pressure arteries buckled when the peak pressures were approximately equal to the critical buckling pressures under static pressure. This was also confirmed by model simulations at low pulse frequencies. Our results provide an effective tool to predict artery buckling pressure under pulsatile pressure.