Evaluation and implementation of triple-channel radiochromic film dosimetry in brachytherapy

Study of PRESAGE® dosimeter for end-to-end 3D radiotherapy verification using an anthropomorphic phantom with bespoke dosimeter insert

Modern radiotherapy techniques have advanced and become more sophisticated. End-to-end 3D verification of the complex radiotherapy dose distribution in an anthropomorphic phantom can ensure the accuracy of the treatment delivery. The phantoms commonly used for dosimetry are homogeneous solid water phantom which lacks the capability to measure the 3D dose distribution for heterogeneous tissues necessary for advanced radiotherapy techniques. Therefore, we developed an end-to-end 3D radiotherapy dose verification system based on MAX-HD anthropomorphic phantom (Integrated Medical Technologies Inc., Troy, New York) with bespoke intracranial insert for PRESAGE® dosimeter. In this study, several advanced radiotherapy treatment techniques of various levels of complexity; 3D-CRT, IMRT and VMAT treatment, were planned for a 20 mm diameter of a spherical target in the brain region and delivered to the phantom. The dosimeters were read out using an in-house developed optical computed tomography (OCT) imaging system known as 3DmicroHD-OCT. It was found that the measured dose distribution of the PRESAGE® when compared with the measured dose distribution of EBT film and Monaco TPS has a maximum difference of less than 3% for 3D-CRT, IMRT and VMAT treatment plans. The gamma analysis results of PRESAGE® in comparison to EBT film and Monaco TPS show pass rates of more than 95% for the criteria of 3% dose difference and 3 mm distance-to-agreement. This study proves the capability of PRESAGE® and bespoke MAX-HD phantom in conjunction with the 3DmicroHD-OCT system to measure 3D dose distribution for end-to-end dosimetry verification.

Effect of glass compression plate on EBT-XD film dosimetry for pretreatment quality assurance of stereotactic body radiotherapy

Background

EBT-XD film specially designed for high dose verifications such as stereotactic treatments. The dose response of the film can be affected by several factors, the curly nature of the film being one of them. In this study this curly nature of the film was investigated for stereotactic body radiotherapy (SBRT) plan verifications.

Materials and methods

For this study, 18 SBRT (11 prostate, 3 spines, and 4 lungs) cases were enrolled. For all the cases, VMAT plans were created in the Monaco treatment planning system and plan was delivered in Elekta Versa HD linear accelerator and delivered fluence was captured by EBT-XD films. All films were scanned with and without a compression plate. All the films were analyzed using the single-channel film method using the red channel.

Results

A significant difference in the gamma passing rates (GPR) for the films scanned with and without the compression plate was observed. The maximum percentage differences in GPR between using and not using a compression plate were 12.7% for 1% 1 mm, 8.1% for 2% 2 mm, 7.5% for 3% 2 mm, and 5% for 3% 3mm criteria. Similarly, the mean %difference in GPR was 5.8% for 1% 1 mm, 2.4% for 2% 2 mm, 1.6% for 3% 2 mm and 0.96% for 3% 3 mm criteria.

Conclusion

The results suggest that placing a compression plate over the film during scanning provided a great advantage in achieving a more accurate gamma passing rate irrespective of gamma criteria.

Flexible Cotton Fabric-Based Ionizing Radiation Dosimeter for 2D Dose Distribution Measurements over a Wide Dose Range at High Dose Rates

This work presents an ecological, flexible 2D radiochromic dosimeter for measuring ionizing radiation in the kilogray dose range. Cotton woven fabric made of cellulose was volume-modified with nitrotetrazolium blue chloride as a radiation-sensitive compound. Its features include a color change during exposure from yellowish to purple-brown and flexibility that allows it to adapt to various shapes. It was found that (i) the dose response is up to ~80 kGy, (ii) it is independent of the dose rate for 1.1-73.1 kGy/min, (iii) it can be measured in 2D using a flatbed scanner, (iv) the acquired images can be filtered using a mean filter, which improves its dose resolution, (v) the dose resolution is -0.07 to -0.4 kGy for ~0.6 to ~75.7 kGy for filtered images, and (vi) two linear dose subranges can be distinguished: ~0.6 to ~7.6 kGy and ~9.9 to ~62.0 kGy. The dosimeter combined with flatbed scanner reading and data processing using dedicated software packages constitutes a comprehensive system for measuring dose distributions for objects with complex shapes.

Comprehensive evaluation and new recommendations in the use of Gafchromic EBT3 film

BACKGROUND

Gafchromic film's unique properties of tissue-equivalence, dose-rate independence, and high spatial resolution make it an attractive choice for many dosimetric applications. However, complicated calibration processes and film handling limits its routine use.

PURPOSE

We evaluated the performance of Gafchromic EBT3 film after irradiation under a variety of measurement conditions to identify aspects of film handling and analysis for simplified but robust film dosimetry.

METHODS

The short- (from 5 min to 100 h) and long-term (months) film response was evaluated for clinically relevant doses of up to 50 Gy for accuracy in dose determination and relative dose distributions. The dependence of film response on film-read delay, film batch, scanner type, and beam energy was determined.

RESULTS

Scanning the film within a 4-h window and using a standard 24-h calibration curve introduced a maximum error of 2% over a dose range of 1-40 Gy, with lower doses showing higher uncertainty in dose determination. Relative dose measurements demonstrated <1 mm difference in electron beam parameters such as depth of 50% of the maximum dose value (R50 ), independent of when the film was scanned after irradiation or the type of calibration curve used (batch-specific or time-specific calibration curve) if the same default scanner was used. Analysis of films exposed over a 5-year period showed that using the red channel led to the lowest variation in the measured net optical density values for different film batches, with doses >10 Gy having the lowest coefficient of variation (<1.7%). Using scanners of similar design produced netOD values within 3% after exposure to doses of 1-40 Gy.

CONCLUSIONS

This is the first comprehensive evaluation of the temporal and batch dependence of Gafchromic EBT3 film evaluated on consolidated data over 8 years. The relative dosimetric measurements were insensitive to the type of calibration applied (batch- or time-specific) and in-depth time-dependent dosimetric signal behaviors can be established for film scanned outside of the recommended 16-24 h post-irradiation window. We generated guidelines based on our findings to simplify film handling and analysis and provide tabulated dose- and time-dependent correction factors to achieve this without reducing the accuracy of dose determination.

Evaluation of a new radiochromic film dosimeter, Gafchomic EBT4, for VMAT, SABR and HDR treatment delivery verification

Objective.To evaluate a new film for radiotherapy dosimetry, Gafchromic EBT4, compared to the current EBT3. To evaluate dose-response and verify test cases in MV external beam and HDR brachytherapy.Approach. Three lots (batches) of EBT4 and three lots of EBT3 films were calibrated at 6 MV over 0-1200 cGy range, using FilmQAPro software. Signal-to-noise of pixel value, reported dose (RD), and factors affecting dosimetry accuracy were evaluated (rotation of the film at scanning, energy response and post-exposure darkening). Both films were exposed to clinical treatment plans (VMAT prostate, SABR lung, single HDR source dwell, and 'pseudo' 3-channel HDR cervix brachytherapy). Film-RD was compared to TPS-calculated dose.Main results.EBT4 calibration curves had characteristics more favourable than EBT3 for radiation dosimetry, with improved signal to noise in film-RD of EBT4 compared to EBT3 (increase of average 46% in red and green channels at 500 cGy). Film rotation at scanning and post-exposure darkening was similar for the two films. The energy response of EBT4 is similar to EBT3. For all clinical case studies, EBT4 provided better agreement with the TPS-planned doses than EBT3. VMAT prostate gamma 3%/3 mm passing rate, EBT4 100.0% compared to EBT3 97.9%; SABR lung gamma 2%/2 mm, EBT4 99.6% and EBT3 97.9%; HDR cervix gamma 3%/2 mm, EBT4 97.7% and EBT3 95.0%.Significance.These results show EBT4 is superior to EBT3 for radiotherapy dosimetry validation of TPS plan delivery. Fundamental improvements in noise profile and calibration curve are reported for EBT4. All clinical test cases showed EBT4 provided equivalent or smaller difference in measured dose to TPS calculated dose than EBT3. Baseline data is presented on the achievable accuracy of film dosimetry in radiotherapy using the new Gafchromic EBT4 film.

Experimental validation of Monte Carlo dosimetry for therapeutic beta emitters with radiochromic film in a 3D-printed phantom

PURPOSE

Validation of dosimetry software, such as Monte Carlo (MC) radiation transport codes used for patient-specific absorbed dose estimation, is critical prior to their use in clinical decision making. However, direct experimental validation in the clinic is generally not performed for low/medium-energy beta emitters used in radiopharmaceutical therapy (RPT) due to the challenges of measuring energy deposited by short-range particles. Our objective was to design a practical phantom geometry for radiochromic film (RF)-based absorbed dose measurements of beta-emitting radionuclides and perform experiments to directly validate our in-house developed Dose Planning Method (DPM) MC code dedicated to internal dosimetry.

METHODS

The experimental setup was designed for measuring absorbed dose from beta emitters that have a range sufficiently penetrating to ∼200 μm in water as well as to capture any photon contributions to absorbed dose. Assayed ¹⁷⁷ Lu and ⁹⁰ Y liquid sources, 13-450 MBq estimated to deliver 0.5-10 Gy to the sensitive layer of the RF, were injected into the cavity of two 3D-printed half-cylinders that had been sealed with 12.7 μm or 25.4 μm thick Kapton Tape. A 3.8 × 6 cm strip of GafChromic EBT3 RF was sandwiched between the two taped half-cylinders. After 2-48 h exposures, films were retrieved and wipe tested for contamination. Absorbed dose to the RF was measured using a commercial triple-channel dosimetry optimization method and a calibration generated via 6 MV photon beam. Profiles were analyzed across the central 1 cm² area of the RF for validation. Eleven experiments were completed with ¹⁷⁷ Lu and nine with ⁹⁰ Y both in saline and a bone equivalent solution. Depth dose curves were generated for ¹⁷⁷ Lu and ⁹⁰ Y stacking multiple RF strips between a single filled half-cylinder and an acrylic backing. All experiments were modeled in DPM to generate voxelized MC absorbed dose estimates. We extended our study to benchmark general purpose MC codes MCNP6 and EGSnrc against the experimental results as well.

RESULTS

A total of 20 experiments showed that both the 3D-printed phantoms and the final absorbed dose values were reproducible. The agreement between the absorbed dose estimates from the RF measurements and DPM was on average -4.0% (range -10.9% to 3.2%) for all single film ¹⁷⁷ Lu experiments and was on average -1.0% (range -2.7% to 0.7%) for all single film ⁹⁰ Y experiments. Absorbed depth dose estimates by DPM agreed with RF on average 1.2% (range -8.0% to 15.2%) across all depths for ¹⁷⁷ Lu and on average 4.0% (range -5.0% to 9.3%) across all depths for ⁹⁰ Y. DPM absorbed dose estimates agreed with estimates from EGSnrc and MCNP across the board, within 4.7% and within 3.4% for ¹⁷⁷ Lu and ⁹⁰ Y respectively, for all geometries and across all depths. MC showed that absorbed dose to RF from betas was greater than 92% of the total (betas + other radiations) for ¹⁷⁷ Lu, indicating measurement of dominant beta contribution with our design.

CONCLUSIONS

The reproducible results with a RF insert in a simple phantom designed for liquid sources demonstrate that this is a reliable setup for experimentally validating dosimetry algorithms used in therapies with beta-emitting unsealed sources. Absorbed doses estimated with the DPM MC code showed close agreement with RF measurement and with results from two general purpose MC codes, thereby validating the use of this algorithms for clinical RPT dosimetry.

Features of 2Day.QA® as a 2D radiation dosimeter

PURPOSE

A new commercial 2D ionising radiation dosimeter (2Day.QA®) was developed. This work aims to introduce the basic functions of 2Day.QA®.

METHODS

The dosimeter is made mainly of a linear polysaccharide consisting of β(1 → 4) linked d-glucose units and radiation active substances, which make it environmentally friendly. For 2Day.QA® irradiation, radiotherapy ionising radiation sources were used. The analysis of 2Day.QA® was performed using three scanners: Vidar® Red LED Dosimetry Pro Advantage™, Vidar® VXR 12-plus™ and HP Scanjet G3010 flatbed scanner. The stability of 2Day.QA® was tested. Exemplary applications of 2DayQA® for QA studies of accelerator light and radiation field coincidence and brachytherapy source position were carried out.

RESULTS

The dosimeter responded to the lowest applied dose of 0.95 Gy and saturated at over 94.9 Gy. The quasi-linear dose response is below 20 Gy. Vidar® Red LED Dosimetry Pro Advantage™ has proven to be superior to other scanners at determining dose effects in 2Day.QA®. The stability of the non-irradiated 2Day.QA® is at least 18 months. After 18 months of storage, the dosimeter reacted to irradiation. In the case of the irradiated samples, a slight color drift related to the absorbed dose was observed. Tests of the use of 2Day.QA® to control the quality of the accelerator light and radiation field coincidence and brachytherapy source position have shown that it can be used for such applications.

CONCLUSIONS

The study reveals the potential of 2Day.QA® for 2D radiation dosimetry and concludes with recommendations for the use of the dosimeter for radiotherapy QA tests.

A preliminary safety assessment of vertebral augmentation with 32P brachytherapy bone cement

Comprehensive treatment for vertebral metastatic lesions commonly involves vertebral augmentation (vertebroplasty or kyphoplasty) to relieve pain and stabilize the spine followed by multiple sessions of radiotherapy. We propose to combine vertebral augmentation and radiotherapy into a single treatment by adding 32P, a β-emitting radionuclide, to bone cement, thereby enabling spinal brachytherapy to be performed without irradiating the spinal cord. The goal of this study was to address key dosimetry and safety questions prior to performing extensive animal studies. The 32P was in the form of hydroxyapatite powder activated by neutron bombardment in a nuclear reactor. We performed ex vivo dosimetry experiments to establish criteria for safe placement of the cement within the sheep vertebral body. In an in vivo study, we treated three control ewes and three experimental ewes with brachytherapy cement containing 2.23–3.03 mCi 32P ml−1 to identify the preferred surgical approach, to determine if 32P leaches from the cement and into the blood, urine, or feces, and to identify unexpected adverse effects. Our ex vivo experiments showed that cement with 4 mCi 32P ml−1 could be safely implanted in the vertebral body if the cement surface is at least 4 mm from the spinal cord in sheep and 5 mm from the spinal cord in humans. In vivo, a lateral retroperitoneal surgical approach, ventral to the transverse processes, was identified as easy to perform while allowing a safe distance to the spinal cord. The blood, urine, and feces of the sheep did not contain detectable levels of 32P, and the sheep did not experience any neurologic or other adverse effects from the brachytherapy cement. These results demonstrate, on a preliminary level, the relative safety of this brachytherapy cement and support additional development and testing.

Development of a heterogeneous phantom to measure range in clinical proton therapy beams

PURPOSE

In particle therapy, determination of range by measurement or calculation can be a significant source of uncertainty. This work investigates the development of a bespoke Range Length Phantom (RaLPh) to allow independent determination of proton range in tissue. This phantom is intended to be used as an audit device.

METHOD

RaLPh was designed to be compact and allows different configurations of tissue substitute slabs, to facilitate measurement of range using radiochromic film. Fourteen RaLPh configurations were tested, using two types of proton fluence optimised water substitutes, two types of bone substitute, and one lung substitute slabs. These were designed to mimic different complex tissue interfaces. Experiments were performed using a 115 MeV mono-energetic scanning proton beam to investigate the proton range for each configuration. Validation of the measured film ranges was performed via Monte Carlo simulations and ionisation chamber measurements. The phantom was then assessed as an audit device, by comparing film measurements with Treatment Planning System (TPS) predicted ranges.

RESULTS

Varying the phantom slab configurations allowed for measurable range differences, and the best combinations of heterogeneous material gave agreement between film and Monte Carlo on average within 0.2% and on average within 0.3% of ionisation chamber measurements. Results against the TPS suggest a material density override is currently required to enable the phantom to be an audit device.

CONCLUSION

This study found that a heterogeneous phantom with radiochromic film can provide range verification as part of a dedicated audit for clinical proton therapy beams.

Early Responses to Low-Dose Ionizing Radiation in Cellular Lens Epithelial Models

Cataract is the leading cause of visual impairment which can result in blindness. Cataract formation has been associated with radiation exposure; however, the mechanistic understanding of this phenomenon is still lacking. The goal of this study was to investigate mechanisms of cataract induction in isolated lens epithelial cells (LEC) exposed to ionizing radiation. Human LECs from different genetic backgrounds (SV40 immortalized HLE-B3 and primary HLEC cells) were exposed to varying doses of 137Cs gamma rays (0, 0.1, 0.25 and 0.5 Gy), at low (0.065 Gy/min) and higher (0.3 Gy/min) dose rates. Different assays were used to measure LEC response for, e.g., viability, oxidative stress, DNA damage studies, senescence and changes to telomere length/telomerase activity at two time points (1 h and 24 h, or 24 h and 15 days, depending on the type of assay and expected response time). The viability of cells decreased in a dose-dependent manner within 24 h of irradiation. Measurement of reactive oxygen species showed an increase at 1 h postirradiation, which was alleviated within 24 h. This was consistent with DNA damage results showing high DNA damage after 1 h postirradiation which reduced significantly (but not completely) within 24 h. Induction of senescence was also observed 15 days postirradiation, but this was not attributed to telomere erosion or telomerase activity reduction. Overall, these findings provide a mechanistic understanding of low-dose radiation-induced cataractogenesis which will ultimately help to inform judgements on the magnitude of risk and improve existing radiation protection procedures.

How to design, fabricate, and validate a customized COMS-style eye plaque: Illustrated with a narrow-slotted plaque example

PURPOSE

A customized Collaborative Ocular Melanoma Study (COMS)-style eye plaque may provide superior dosimetric coverage compared with standard models for certain intraocular tumor locations and shapes. This work provides a recipe for developing and validating such customized plaques.

METHODS AND MATERIALS

The concept-into-clinical treatment process for a customized COMS-style eye plaque begins with a CAD model design that meets the specifications of the radiation oncologist and surgeon based on magnetic resonance, ultrasound, and clinical measurements, as well as a TG-43 hybrid heterogeneity-corrected dose prediction to model the dose distribution. Next, a 3D printed plastic prototype is created and reviewed. After design approval, a Modulay plaque is commercially fabricated. Quality assurance (QA) is subsequently performed to verify the physical measurements of the Modulay and Silastic and also includes dosimetric measurement of the calibration, depth dose, and dose profiles. Sterilization instructions are provided by the commercial fabricator. This customization procedure and QA methodology is demonstrated with a narrow-slotted plaque that was recently constructed for the treatment of a circumpapillary (e.g., surrounding the optic disk) ocular tumor.

RESULTS

The production of a customized COMS-style eye plaque is a multistep process. Dosimetric modeling is recommended to ensure that the design will meet the patient's needs, and QA is essential to confirm that the plaque has the proper dimensions and dose distribution. The customized narrow-slotted plaque presented herein was successfully implemented in the clinic, and provided superior dose coverage of juxtapapillary and circumpapillary tumors compared with standard or notched COMS-style plaques. Plaque development required approximately 30 h of physicist time and a fabrication cost of $1500.

CONCLUSION

Customized eye plaques may be used to treat intraocular tumors that cannot be adequately managed with standard models. The procedure by which a customized COMS-style plaque may be designed, fabricated, and validated was presented along with a clinical example.

Triple channel analysis of Gafchromic EBT3 irradiated with clinical carbon-ion beams

Self-developing radiochromic film is widely used in radiotherapy QA procedures. To compensate for typical film inhomogeneities, the triple channel analysis method is commonly used for photon-irradiated film. We investigated the applicability of this method for Gafchromic^TMEBT3 (Ashland) film irradiated with a clinically used carbon-ion beam. Calibration curves were taken from EBT3 film specimens irradiated with monoenergetic carbon-ion beams of different doses. Measurements of the lateral field shape and homogeneity were performed in the middle of a passively modulated spread-out Bragg peak and compared to simultaneous characterization by means of a 2D ionization chamber array. Additional measurements to investigate the applicability of EBT3 for quality assurance (QA) measurement in carbon-ion beams were performed. The triple-channel analysis reduced the relative standard deviation of the doses in a uniform carbon ion field by 30% (from 1.9% to 1.3%) and reduced the maximum deviation by almost a factor of 3 (from 28.6% to 9.8%), demonstrating the elimination of film artifacts. The corrected film signal showed considerably improved image quality and quantitative agreement with the ionization chamber data, thus providing a clear rationale for the usage of the triple channel analysis in carbon-beam QA.

Dosimetric properties of a newly developed thermoluminescent sheet-type dosimeter for clinical proton beams

Purpose

This study aimed to evaluate the dosimetric properties of a newly developed thermoluminescent sheet‐type dosimeter (TLD‐sheet) for clinical proton beams.

Materials and Methods

The TLD‐sheet is composed mainly of manganese doped lithium triborate, with a physical size and thickness of 150 mm × 150 mm and 0.15 mm respectively. It is flexible and can be cut freely for usage. The TLD‐sheet has an effective atomic number of 7.3 and tissue‐equivalent properties. We tested the reproducibility, fading effect, dose linearity, homogeneity, energy dependence, and water equivalent thickness (WET) of the TLD‐sheet for clinical proton beams. We conducted tests with both unmodulated and modulated proton beams at energies of 150 and 210 MeV.

Results

The measurement reproducibility was within 4%, which included the inhomogeneity of the TLD‐sheet. The fading rates were approximately 20% and 30% after 2 and 7 days respectively. The TLD‐sheet showed notable energy dependence in the Bragg peak and distal end of the spread‐out Bragg peak regions. However, the dose–response characteristics of the TLD‐sheet remained linear up to a physical dose of 10 Gy in this study. This linearity was highly superior to those of commonly used radiochromic film. The thin WET of the TLD‐sheet had little effect on the range.

Conclusion

Although notable energy dependences were observed in Bragg peak region, the response characteristics examined in this study, such as reproducibility, fading effects, dose linearity, dose homogeneity and WET, showed that the TLD‐sheet can be a useful and effective dosimetry tool. With its flexible and reusable characteristics, it may also be an excellent in vivo skin dosimetry tool for proton therapy.

Comparison of different TBI techniques in terms of dose homogeneity - review study

Total body irradiation (TBI) is a kind of external beam radiotherapy, used in conjunction with chemotherapy with the purpose of immunosuppression. Since the target in TBI is the whole body, so achieving uniform dose distribution throughout the entire body during TBI is necessary. As recommended by AAPM dose variation must be within ±10% of the prescription dose. With the evidences from literature there is limited substantiation to consider a treatment method better than others, but with regard to the size of the treatment room, workload of the radiotherapy department and prevalent technology used within each treatment department it is recommended to make the suitable and optimum method in each department. In this work, a review study was performed on different TBI techniques with the purpose of assessment and comparison of dose distribution homogeneity in these methods.

Optimized method for in vivo dosimetry with small films in pelvic IOERT for rectal cancer

PURPOSE

Intra-Operative Electron Radiation Therapy (IOERT) is used to treat rectal cancer at our institution, and in vivo measurements with Gafchromic EBT3® films were introduced as quality assurance. The purpose of this work was to quantify the uncertainties associated with digitization of very small EBT3 films irradiated simultaneously, in order to optimize in vivo dosimetry for IOERT.

METHODS

Film samples of different sizes - M1 (5×5cm²), M2 (1.5×1.5 cm²), M3 (1.0×1.5 cm²) and M4 (0.75×1.5 cm²) - were used to quantify typical variations (uncertainties) due to scanner fluctuations, misalignment, film inhomogeneity, long-term effect of film cutting, small rotations, film curling, edge effects and the influence of opaque templates. Fitting functions and temporal validity of sensitometric curves were also assessed.

RESULTS

Film curling, intra-film variability and scanner fluctuations are important effects that need to be minimized or considered in the uncertainty budget. Small rotations, misalignments and film cutting have little or no influence on the readings. Most fitting functions perform well, but the quantity used for dose quantification determines over- or under-valuation of dose in the long term. Edge effects and the influence of opaque templates need to be well understood, to allow optimization of methodology to the intended purpose.

CONCLUSION

The proposed method allows practical and simultaneous digitization of up to ten small irradiated film samples, with an experimental uncertainty of 1%.

Clinically-implementable template plans for multidwell treatments using Leipzig-style applicators in 192Ir surface brachytherapy

PURPOSE

Multiple dwell positions ("multidwell") within a Leipzig-style applicator can be used to increase dose uniformity and treatment area. Model-based dose calculation algorithms (MBDCAs) are necessary for accurate calculations involving these applicators because of their nonwater equivalency and complex geometry. The purpose of this work was to create template plans from MBDCA calculations and present their dwell times and positions for users of these applicators without access to MBDCAs.

METHODS AND MATERIALS

The Leipzig-style solid applicator model within our treatment planning system was used to design template plans. Five template plans, normalized to 0.3 cm depth within a water phantom, were optimized using the treatment planning system MBDCA. Each template plan contained unique dwell positions, times, and active lengths (0.5-1.5 cm). A single-dwell distribution was optimized for comparison. The stem of this applicator stops within the shell; therefore, one template plan contained an intrafraction rotation to determine the largest dose distribution achievable. Effects of imperfect applicator rotation were quantified by inserting rotational offsets and comparing the V_100%, D_95%, and minimum dose coverage for planning target volumes created from 80%/90% isodose lines.

RESULTS

The 90% (80%) isodose line dimensions at 0.3 cm depth for single-dwell increased from 0.94 × 0.97 (1.53 × 1.57) cm² to 2.09 × 1.24 (2.75 × 1.88) cm² in the largest template plan. Manually inserted angular offsets up to ±10° for the template plan requiring rotation preserved V_100%, D_95%, and minimum dose within 2.0%, 1.9%, and 8.0%, respectively.

CONCLUSION

A set of template plans was created to provide accessibility to the multidwell methodology, even for users without access to MBDCAs. Each template plan should be reviewed before clinical implementation.

Small-field output ratio determination using 6 mol% Ge-doped silica fibre dosimeters

This work investigates the suitability of locally fabricated 6 mol% Ge-doped optical fibres as dosimeters for small-field output ratio measurements. Two fabrications of fibre, cylindrical (CF) and flat (FF) fibres, were used to measure doses in small photon fields, from 4 to 15 mm. The findings were compared to those of commercial Ge-doped fibre (COMM), EBT3 film and an IBA CC01 ionization chamber. Irradiations were carried out using a 6 MV SRS photon beam operating at a dose rate of 1000 cGy min^-1, delivering a dose of 16 Gy. To minimise the possibility of the fibres failing to be exposed to the intended dose in small fields, the fibres were accommodated in a custom-made Perspex phantom. For the 4 mm cone the CF and FF measured output ratios were found to be smaller than obtained with EBT3 film by 32% and 13% respectively. Conversely, while for the 6 to 15 mm cone fields the FF output ratios were consistently greater than those obtained using EBT3 film, the CF output ratios differed from those of EBT3 film by at most 3.2%, at 6 mm, otherwise essentially agreeing with EBT3 values at the other field sizes. For the 4 to 7.5 mm cones, all output ratios obtained from Ge-doped optical fibre measurements were greater than those of IBA CC01 ionization chamber. The measured FF and CF output ratios for the 7.5 to 15 mm cones agreed with published MC estimates to within 15% and 13%, respectively. Down to 6 mm cone field, present measurements point to the potential of CF as a small-field dosimeter, its use recommended to be complemented by the use of EBT3 film for small-field dosimetry.

Methodology for radiochromic film analysis using FilmQA Pro and ImageJ

Radiochromic film (RCF) has several advantageous characteristics which make it an attractive dosimeter for many clinical tasks in radiation oncology. However, knowledge of and strict adherence to complicated protocols in order to produce accurate measurements can prohibit RCF from being widely adopted in the clinic. The purpose of this study was to outline some simple and straightforward RCF fundamentals in order to help clinical medical physicists perform accurate RCF measurements. We describe a process and methodology successfully used in our practice with the hope that it saves time and effort for others when implementing RCF in their clinics. Two RCF analysis software programs which differ in cost and complexity, the commercially available FilmQA Pro package and the freely available ImageJ software, were used to show the accuracy, consistency and limitations of each. The process described resulted in a majority of the measurements across a wide dose range to be accurate within ± 2% of the intended dose using either FilmQA Pro or ImageJ.

Feasibility of using multiple-dwell positions in 192Ir Leipzig-style brachytherapy surface applicators to expand target coverage and clinical application

PURPOSE

Leipzig-style applicators for surface brachytherapy are traditionally used with a single-source dwell position. This study explores the feasibility of using multiple-source dwell positions ("multidwell") to improve the dose coverage and applicability of Leipzig-style applicators.

METHODS AND MATERIALS

A virtual model of the Leipzig-style applicator was commissioned for a model-based dose calculation algorithm (MBDCA) and compared against American Association of Physicists in Medicine working group 186 benchmarking data sets and ionization chamber point measurements. An absolute dosimetry technique based on radiochromic film was used to validate both single-dwell and multidwell plans.

RESULTS

Dose distributions generated from the MBDCA-based virtual model were consistent with working group data sets, ion chamber measurements, and radiochromic film analysis. In one multidwell configuration, at 3 mm prescription depth, the 80% isodose width was increased to 25 mm, compared with 15 mm in the same dimension for a single-dwell delivery. In the same multidwell configuration, the flatness, measured as >98% isodose line, was more than doubled to 8 mm, compared with 3 mm in the same dimension. For multidwell plans, 2-D planar agreement between radiochromic film and MBDCA exceeded 93% in gamma analysis (3%/1 mm criteria). Submillimeter positional agreement was found, with a total dosimetric uncertainty of 4.5% estimated for the entire system.

CONCLUSIONS

Leipzig-style surface applicators with multiple-source dwell positions have been benchmarked against radiochromic film dosimetry. Results show that the clinically viable coverage area can be increased significantly.

The dosimetric effect of variations in source position on treatments using Leipzig-style brachytherapy skin applicators

Leipzig-style skin brachytherapy applicators are an excellent choice for the treatment of small surface lesions, since they can be used with a high dose rate source to produce a tightly constrained treatment field on the desired area of the skin. The dosimetry of these applicators is challenging to independently verify due to their small dimensions, complex energy spectrum and steep dose gradients. In particular the close proximity of the brachytherapy source to the treatment region is cause for concern, since small variations in the position of the radioactive source may significantly affect the resulting dose distribution. The aim of this work was to assess the dosimetry of these applicators using three independently techniques and use these results to examine the effect of variation in source position on the dose distribution. Simulation of different sized applicators in conjunction with a Gammamed + Ir¹⁹² source was performed using the EGSnrc Monte Carlo code. Dose distributions at the prescription depth and at the surface generated by Monte Carlo were compared to the outputs of a commercially available treatment planning system and measurements using radiochromic film. Source displacements of up to 0.5 mm in the vertical direction, 0.65 mm in the horizontal direction, and rotations of the source by up to 5° were all simulated. Changes in dose of over 6% at the prescription point and reductions in coverage at the 100% isodose level of several millimetres were observed even for small shifts of the source from its intended position. This work demonstrates that variation in the position of the radiation source is the dominant source of uncertainty in the use of these types of applicators. Centres wishing to perform treatments using these applicators are advised to take steps to control the uncertainty and ensure it remains at an acceptable level.

Two-dimensional in vivo rectal dosimetry during high-dose-rate brachytherapy for cervical cancer: a phantom study

BACKGROUND

The aim of the present study was to verify the dosimetric accuracy of two-dimensional (2D) in vivo rectal dosimetry using an endorectal balloon (ERB) with unfoldable EBT3 films for high-dose-rate (HDR) brachytherapy for cervical cancer. The clinical applicability of the technique was discussed.

MATERIAL AND METHODS

ERB inflation makes the EBT3 films unrolled, whereas its deflation makes them rolled. Patient-specific quality assurance (pQA) tests were performed in 20 patient plans using an Ir-192 remote afterloading system and a water-filled cervical phantom with the ERB. The dose distributions measured in ERBs were compared with those of the treatment plans.

RESULTS

The absolute dose profiles measured by the ERBs were in good agreement with those of treatment plans. The global gamma passing rates were 96-100% and 91-100% over 20 pQAs under the criteria of 3%/3 mm and 3%/2 mm, respectively, with a 30% low-dose threshold. Dose-volume histograms of the rectal wall were obtained from the measured dose distributions and showed small volume differences less than 2% on average from the patients' plans over the entire dose interval. The positioning error of the applicator set was detectable with high sensitivity of 12% dose area variation per mm. Additionally, the clinical applicability of the ERB was evaluated in volunteers, and none of them felt any pain when the ERB was inserted or removed.

CONCLUSIONS

The 2D in vivo rectal dosimetry using the ERB with EBT3 films was effective and might be clinically applicable for HDR brachytherapy for cervical and prostate cancers to monitor treatment accuracy and consistency as well as to predict rectal toxicity.

Verification of high-dose-rate brachytherapy treatment planning dose distribution using liquid-filled ionization chamber array

Purpose

This study aims to investigate the dosimetric performance of a liquid-filled ionization chamber array in high-dose-rate (HDR) brachytherapy dosimetry. A comparative study was carried out with air-filled ionization chamber array and EBT3 Gafchromic films to demonstrate its suitability in brachytherapy.

Material and methods

The PTW OCTAVIUS detector 1000 SRS (IA 2.5-5 mm) is a liquid-filled ionization chamber array of area 11 x 11 cm² and chamber spacing of 2.5-5 mm, whereas the PTW OCTAVIUS detector 729 (IA 10 mm) is an air vented ionization chamber array of area 27 x 27 cm² and chamber spacing of 10 mm. EBT3 films were exposed to doses up to a maximum of 6 Gy and evaluated using multi-channel analysis. The detectors were evaluated using test plans to mimic a HDR intracavitary gynecological treatment. The plan was calculated and delivered with the applicator plane placed 20 mm from the detector plane. The acquired measurements were compared to the treatment plan. In addition to point dose measurement, profile/isodose, gamma analysis, and uncertainty analysis were performed. Detector sensitivity was evaluated by introducing simulated errors to the test plans.

Results

The mean point dose differences between measured and calculated plans were 0.2% ± 1.6%, 1.8% ± 1.0%, and 1.5% ± 0.81% for film, IA 10 mm, and IA 2.5-5 mm, respectively. The average percentage of passed gamma (global/local) values using 3%/3 mm criteria was above 99.8% for all three detectors on the original plan. For IA 2.5-5 mm, local gamma criteria of 2%/1 mm with a passing rate of at least 95% was found to be sensitive when simulated positional errors of 1 mm was introduced.

Conclusion

The dosimetric properties of IA 2.5-5 mm showed the applicability of liquid-filled ionization chamber array as a potential QA device for HDR brachytherapy treatment planning systems.

Adaptation and validation of a commercial head phantom for cranial radiosurgery dosimetry end-to-end audit

OBJECTIVE

To adapt and validate an anthropomorphic head phantom for use in a cranial radiosurgery audit.

METHODS

Two bespoke inserts were produced for the phantom: one for providing the target and organ at risk for delineation and the other for performing dose measurements. The inserts were tested to assess their positional accuracy. A basic treatment plan dose verification with an ionization chamber was performed to establish a baseline accuracy for the phantom and beam model. The phantom and inserts were then used to perform dose verification measurements of a radiosurgery plan. The dose was measured with alanine pellets, EBT extended dose film and a plastic scintillation detector (PSD).

RESULTS

Both inserts showed reproducible positioning (±0.5 mm) and good positional agreement between them (±0.6 mm). The basic treatment plan measurements showed agreement to the treatment planning system (TPS) within 0.5%. Repeated film measurements showed consistent gamma passing rates with good agreement to the TPS. For 2%-2 mm global gamma, the mean passing rate was 96.7% and the variation in passing rates did not exceed 2.1%. The alanine pellets and PSD showed good agreement with the TPS (-0.1% and 0.3% dose difference in the target) and good agreement with each other (within 1%).

CONCLUSION

The adaptations to the phantom showed acceptable accuracies. The presence of alanine and PSD do not affect film measurements significantly, enabling simultaneous measurements by all three detectors. Advances in knowledge: A novel method for thorough end-to-end test of radiosurgery, with capability to incorporate all steps of the clinical pathway in a time-efficient and reproducible manner, suitable for a national audit.

In vivo dosimetry using Gafchromic films during pelvic intraoperative electron radiation therapy (IOERT)

OBJECTIVE

To characterize in vivo dose distributions during pelvic intraoperative electron radiation therapy (IOERT) for rectal cancer and to assess the alterations introduced by irregular irradiation surfaces in the presence of bevelled applicators.

METHODS

In vivo measurements were performed with Gafchromic films during 32 IOERT procedures. 1 film per procedure was used for the first 20 procedures. The methodology was then optimized for the remaining 12 procedures by using a set of 3 films. Both the average dose and two-dimensional dose distributions for each film were determined. Phantom measurements were performed for comparison.

RESULTS

For flat and concave surfaces, the doses measured in vivo agree with expected values. For concave surfaces with step-like irregularities, measured doses tend to be higher than expected doses. Results obtained with three films per procedure show a large variability along the irradiated surface, with important differences from expected profiles. These results are consistent with the presence of surface hotspots, such as those observed in phantoms in the presence of step-like irregularities, as well as fluid build-up.

CONCLUSION

Clinical dose distributions in the IOERT of rectal cancer are often different from the references used for prescription. Further studies are necessary to assess the impact of these differences on treatment outcomes. In vivo measurements are important, but need to be accompanied by accurate imaging of positioning and irradiated surfaces.

ADVANCES IN KNOWLEDGE

These results confirm that surface irregularities occur frequently in rectal cancer IOERT and have a measurable effect on the dose distribution.

Gafchromic film dosimetry of a new HDR 192Ir brachytherapy source

High‐dose‐rate (HDR) brachytherapy is a popular modality for treating cancers of the prostate, cervix, endometrium, breast, skin, bronchus, esophagus, and head and neck as well as soft‐tissue sarcomas. Because of different source designs and licensing issues, there is a need for specific dosimetry dataset for each HDR source model. The main objective of the present work is to measure 2D relative dose distribution around a new prototype  192Ir source, referred to as IRAsource‐HDR, in PMMA phantom in the framework of AAPM TG‐43 and TG‐55 recommendations for radial distances of 0.5 cm to 4 cm. Radiochromic films (RCFs) Gafchromic EBT and HD‐810 were used for measurements. The dose rate constant, Λ, of the source was determined to be 1.084±4.6%,1.129±4.4%, and 1.112±0.8% cGyh−1U−1 using EBTRCF, HD‐810 RCF, and Monte Carlo (MC) simulation, respectively. The results obtained in this study are in good agreement with previously published data for HDR interstitial  192Ir‐HDR sources with a maximum discrepancy of ±4.5%. An acceptable agreement (within ±2%) between MC calculations and RCFs measurements showed that HD‐810 RCF dosimetry is as good as EBTRCF, within HDR brachytherapy, and justifies the use of specific data for this new source. These data could be used as a benchmark for dose calculations in the conventional brachytherapy treatment planning systems.

PACS number(s): 87.56.bg

GafChromic(®) EBT3 films for patient specific IMRT QA using a multichannel approach

PURPOSE

To evaluate EBT3 for pre-treatment patient specific quality assurance (QA). The method we propose combines the experience gained in our center with the guidelines of the protocol proposed by Lewis et al. in 2012. To compare the multichannel approach with the single channel dosimetry.

METHODS

Gafchromic® EBT3 films were irradiated both at linac and TomoTherapy and calibration curves were obtained. A series of irradiations with simple fields (uniform dose distributions on regular shaped targets) was performed. In a second stage, films were exposed to full clinical plans at linac (step and shoot IMRT and VMAT). At TomoTherapy dose maps were obtained for a clinical plan in three different coronal planes. Films were digitized using an Epson 10000XL scanner and FilmQA™ Pro software was employed for the analysis.

RESULTS

The measured calibration curves suggest that, at least for the two beams taken into account (6 MV linac and TomoTherapy), a single calibration can be successfully adopted for each film lot. The application of the multichannel optimization method strongly improves the results in terms of gamma passing rates of the comparison between measured and calculated maps.

CONCLUSIONS

Up to now EBT films, although attractive, were not preferred for routine patient specific QA due to their complex and time consuming processing and to the challenging work of characterization. The application of the mentioned protocol, together with some additional precautions, and the adoption of the multichannel optimization dosimetry, make this detector a handy and reliable tool for patient specific QA.

Evaluation and mitigation of potential errors in radiochromic film dosimetry due to film curvature at scanning

This work considers a previously overlooked uncertainty present in film dosimetry which results from moderate curvature of films during the scanning process. Small film samples are particularly susceptible to film curling which may be undetected or deemed insignificant. In this study, we consider test cases with controlled induced curvature of film and with film raised horizontally above the scanner plate. We also evaluate the difference in scans of a film irradiated with a typical brachytherapy dose distribution with the film naturally curved and with the film held flat on the scanner. Typical naturally occurring curvature of film at scanning, giving rise to a maximum height 1 to 2 mm above the scan plane, may introduce dose errors of 1% to 4%, and considerably reduce gamma evaluation passing rates when comparing film‐measured doses with treatment planning system‐calculated dose distributions, a common application of film dosimetry in radiotherapy. The use of a triple‐channel dosimetry algorithm appeared to mitigate the error due to film curvature compared to conventional single‐channel film dosimetry. The change in pixel value and calibrated reported dose with film curling or height above the scanner plate may be due to variations in illumination characteristics, optical disturbances, or a Callier‐type effect. There is a clear requirement for physically flat films at scanning to avoid the introduction of a substantial error source in film dosimetry. Particularly for small film samples, a compression glass plate above the film is recommended to ensure flat‐film scanning. This effect has been overlooked to date in the literature.

PACS numbers: 87.55.Qr, 87.56.bg, 87.55.km