Single-atom doping of MoS2 with manganese enables ultrasensitive detection of dopamine: Experimental and computational approach

Laser-induced stripping defect for highly selective electrochemical quantification of dopamine: Anti-interference from other catecholamine neurotransmitters

Detecting dopamine (DA) is critical for early diagnosis of neurological and psychiatric disorders. However, the presence of other catecholamine neurotransmitters with structural similarities to DA causes significant interference in its detection. Herein, we introduce S stripping defects via laser-induced MoS2 to functionalize MoS2 electrodes and improve their selectivity for DA electrochemical detection. The sensing results show its excellent immunity to interference from other neurotransmitters, ensuring the preservation of the DA electrochemical signal even in the mixed neurotransmitters such as acetylcholine (ACh), γ-aminobutyric acid (GABA), epinephrine (EP), norepinephrine (NP), and serotonin (5-HT). DFT calculations further reveal that the negatively charged S-stripping defects enhance DA adsorption on the surface of the functionalized MoS2 electrode, contributing to its excellent performance. Moreover, this functionalized electrodes successfully monitor DA released from living PC12 cells in the presence of other interference, highlighting its potential applicability in intercellular signaling communication.

Synergistic Coordination Effect and Metal-Support Interaction Engineering of Single-Atom Mn-N2 Sites for Boosting Sensitive and Selective Dopamine Biosensing in Human Serum

Coordination environment of metal atoms is core for designing high-performance single-atom catalysts (SACs), while metal-support interaction also has an important effect on structure-function relationship. Nevertheless, the interaction effect of metal-support is mostly ignored. Through synergistic regulation of coordination environment and metal-support interaction, Mn SAC with atom-dispersed Mn-N2 sites on dopamine (DA) support is synthesized for sensitive and selective DA oxidation based on theoretical calculations and experimental explorations. MnN2 presents the more optimal catalytic site for DA oxidation than other coordination conditions, enhancing sensitivity including a wide range, a low limit of detection, and particularly a very low catalytic potential. The construction of Mn-N2 active sites on DA carbon promotes the coupling between Mn metal atoms and DA support, decreasing work function, facilitating electron exchange, shortening response time, and boosting selectivity. Both the catalytic mechanism of Mn SAC toward DA and the relation construction of catalyst's structure and catalytic function are established.

Enhancement of single-atom catalytic activity by the synergistic effect of interlayer charge transfer and magnetic coupling in an electride-based heterostructure

2D material-based single-atom catalysts have rapidly emerged and flourished in recent years due to their exceptional atomic utilization efficiency, adjustable catalytic activity, and remarkably high selectivity. The interface matching mechanism of 2D materials, influenced by van der Waals (vdW) interactions, presents a novel opportunity for constructing a heterostructure, further augmenting catalytic efficiency. In this work, the mechanism of performance regulation of magnetic transition-metal decorated MoS2 single-atom catalysis by importing a Gd2C electride substrate is investigated using first-principles calculations. The localization of d orbitals in transition-metals is weakened by adding a Gd2C substrate, thereby modulating the catalytic performance. Our findings demonstrate that the formation of an electron layer at the interface of the heterostructure by electride Gd2C induces a modification in the chemical environment of the MoS2 surface. The electron layer enhances the electron transfer during catalysis. Additionally, for the catalyst containing magnetic atoms, Gd2C can also achieve catalytic performance adjustment due to the magnetic coupling, similar to the effect of external magnetic fields. This study offers a novel concept and a pathway for enhancing the performance of single-atom catalysts through the construction of a heterostructure, capitalizing on the distinctive electron layer of an electride and its inherent high magnetic moments.

Recent advances in two-dimensional materials for the diagnosis and treatment of neurodegenerative diseases

With the size of the aging population increasing worldwide, the effective diagnosis and treatment of neurodegenerative diseases (NDDs) has become more important. Two-dimensional (2D) materials offer specific advantages for the diagnosis and treatment of NDDs due to their high sensitivity, selectivity, stability, and biocompatibility, as well as their excellent physical and chemical characteristics. As such, 2D materials offer a promising avenue for the development of highly sensitive, selective, and biocompatible theragnostics. This review provides an interdisciplinary overview of advanced 2D materials and their use in biosensors, drug delivery, and tissue engineering/regenerative medicine for the diagnosis and/or treatment of NDDs. The development of 2D material-based biosensors has enabled the early detection and monitoring of NDDs via the precise detection of biomarkers or biological changes, while 2D material-based drug delivery systems offer the targeted and controlled release of therapeutics to the brain, crossing the blood-brain barrier and enhancing treatment effectiveness. In addition, when used in tissue engineering and regenerative medicine, 2D materials facilitate cell growth, differentiation, and tissue regeneration to restore neuronal functions and repair damaged neural networks. Overall, 2D materials show great promise for use in the advanced treatment of NDDs, thus improving the quality of life for patients in an aging population.

Novel Schiff's base-assisted synthesis of metal-ligand nanostructures for multi-functional applications: Detection of catecholamines/antibiotics, removal of tetracycline, and antifungal treatment against plant pathogens

The development of nanozymes (NZ) for the simultaneous detection of multiple target chemicals is gaining paramount attention in the field of food and health sciences, and waste management industries. Nanozymes (NZ) effectively compensate for the environmental vulnerability of natural enzymes. Considering the development gap of NZ with diverse applications, we synthesized versatile Schiff's base ligands following a facile route and readily available starting reagents (glutaraldehyde, aminopyridines). DPDI, one of the synthesized ligands, readily reacted with transition metal ions (Cu+2, Ag+1, Zn+2 in specific) under ambient conditions, yielding the corresponding nanoparticles/MOF. The structures of ligands and their products were confirmed using various analytical techniques. The enzymatic efficacy of DPDI-Cu (km 0.25 mM=, Vmax = 10.75 µM/sec) surpassed Tremetese versicolor laccase efficacy (km 0. 5 mM=, Vmax = 2.15 µM/sec). Additionally, DPDI-Cu proved resilient to changing pH, temperature, ionic strength, organic solvent, and storage time compared to laccase and provided reusability. DPDI-Cu proved promising for colorimetric detection of dopamine, epinephrine, catechol, tetracycline, and quercetin. The mechanism of oxidative detection of TC was studied through LC/MS analysis. DPDI-Cu-bentonite composite efficiently adsorbed tetracycline with maximum Langmuir adsorption of 208 mg/g. Moreover, DPDI/Cu and DPDI-Ag nanoparticles possessed antifungal activity exhibiting a minimum inhibitory concentration of 400 µg/mL and 3.12 µg/mL against Aspergillus flavus. Florescent dye tracking and SEM/TEM analysis confirmed that DPDI-Ag caused disruption of the plasma membrane and triggered ROS generation and apoptosis-like death in fungal cells. The DPDI-Ag coating treatment of wheat seeds confirmed the non-phytotoxicity of Ag-NPs.

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Vanadium Single Atoms Embedded in MoS2 Enabled Gut-Brain Axis Neurotransmitter Detection at pM Levels

The detection of monoamine neurotransmitters is of paramount importance as the neurotransmitters are the chemical messengers regulating the gut-brain axis (GBA). It requires real-time, ultrasensitive, and selective sensing of the neurotransmitters in the gastric/intestinal fluid. However, multi-components present in the gastric/intestinal fluid make sensing challenging to achieve in terms of ultra-high sensitivity and selectivity. Herein, an approach is introduced to utilize vanadium single atom catalytic (SAC) centers in van der Waals MoS2 (V-MoS2) to selectively detect real-time serotonin (5-HT) in artificial gastric/intestinal fluid. The synergetic effect of V-SACs and the surface S-bonds on the MoS2 surface, enables an extremely wide range of 5-HT detection (from 1 pM to 100 µM), with optimum selectivity and interference resistance. By combining density functional theory calculations and scanning transmission electron microscopy, it is concluded that the V-SACs embedded in the MoS2 network create active sites that greatly facilitate the charge exchange between the material and the 5-HT molecules. This result allows the 5-HT detection in GBA studies to be more reliable, and the material tunability provides a general platform to achieve real-time and multi-component detection of other monoamine neurotransmitters in GBA such as dopamine and norepinephrine.

Bridged Pt-OH-Mn Mediator in N-coordinated Mn Single Atoms and Pt Nanoparticles for Electrochemical Biomolecule Oxidation and Discrimination

The rational design of efficient catalysts for uric acid (UA) electrooxidation, as well as the establishment of structure-activity relationships, remains a critical bottleneck in the field of electrochemical sensing. To address these challenges, herein, a hybrid catalyst that integrates carbon-supported Pt nanoparticles and nitrogen-coordinated Mn single atoms (PtNPs/MnNC) is developed. The metal-metal interaction during annealing affords the construction of metallic-bonded Pt-Mn pairs between PtNPs and Mn single atoms, facilitating the electron transfer from PtNPs to the support and thereby optimizing the electronic structure of catalysts. More importantly, experiments and theoretical calculations provide visual proof for the 'incipient hydrous oxide adatom mediator' mechanism for UA oxidation. The Pt-Mn pairs first adsorb OH* to construct the bridged Pt-OH-Mn mediators to serve as a highly active intermediate for N-H bond dissociation and proton transfer. Benefiting from the unique electronic and geometric structure of the catalytic center and reactive intermediates, PtNPs/MnNC exhibits superior electrooxidation performance. The electrochemical sensor based on PtNPs/MnNC enables sensitive detection and discrimination of UA and dopamine in serum samples. This work offers new insights into the construction of novel electrocatalysts for sensitive sensing platforms.

Recent advances in graphene-based electroanalytical devices for healthcare applications

Graphene, with its outstanding mechanical, electrical, and biocompatible properties, stands out as an emerging nanomaterial for healthcare applications, especially in building electroanalytical biodevices. With the rising prevalence of chronic diseases and infectious diseases, such as the COVID-19 pandemic, the demand for point-of-care testing and remote patient monitoring has never been greater. Owing to their portability, ease of manufacturing, scalability, and rapid and sensitive response, electroanalytical devices excel in these settings for improved healthcare accessibility, especially in resource-limited settings. The development of different synthesis methods yielding large-scale graphene and its derivatives with controllable properties, compatible with device manufacturing - from lithography to various printing methods - and tunable electrical, chemical, and electrochemical properties make it an attractive candidate for electroanalytical devices. This review article sheds light on how graphene-based devices can be transformative in addressing pressing healthcare needs, ranging from the fundamental understanding of biology in in vivo and ex vivo studies to early disease detection and management using in vitro assays and wearable devices. In particular, the article provides a special focus on (i) synthesis and functionalization techniques, emphasizing their suitability for scalable integration into devices, (ii) various transduction methods to design diverse electroanalytical device architectures, (iii) a myriad of applications using devices based on graphene, its derivatives, and hybrids with other nanomaterials, and (iv) emerging technologies at the intersection of device engineering and advanced data analytics. Finally, some of the major hurdles that graphene biodevices face for translation into clinical applications are discussed.

Realizing the Tailored Catalytic Performances on Atomic Pt-Promoted Transition Metal Moieties Implanted Layered Double Hydroxides for Water Electrolysis

High-performance production of green hydrogen gas is necessary to develop renewable energy generation technology and to safeguard the living environment. This study reports a controllable engineering approach to tailor the structure of nickel-layered double hydroxides via doped and absorbed platinum single atoms (PtSA) promoted by low electronegative transition metal (Mn, Fe) moieties (PtSA-Mn,Fe-Ni LDHs). We explore that the electron donation from neighboring transition metal moieties results in the well-adjusted d-band center with the low valence states of PtSA(doped) and PtSA(ads.), thus optimizing adsorption energy to effectively accelerate the H2 release. Meanwhile, a tailored local chemical environment on transition metal centers with unique charge redistribution and high valence states functions as the main center for H2O catalytic dissociation into oxygen. Therefore, the PtSA-Mn,Fe-Ni LDH material possesses a small overpotential of 42 and 288 mV to reach 10 mA·cm-2 for hydrogen and oxygen evolution, respectively, superior to most reported LDH-based catalysts. Additionally, the mass activity of PtSA-Mn,Fe-Ni LDHs proves to be 15.45 times higher than that of commercial Pt-C. The anion exchange membrane electrolyzer stack of PtSA-Mn,Fe-Ni LDHs(+,-) delivers a cell voltage of 1.79 V at 0.5 A·cm-2 and excellent durability over 600 h. This study presents a promising electrocatalyst for a practical water splitting process.

Recent Advances in Conductive Polymers-Based Electrochemical Sensors for Biomedical and Environmental Applications

Electrochemical sensors play a pivotal role in various fields, such as biomedicine and environmental detection, due to their exceptional sensitivity, selectivity, stability, rapid response time, user-friendly operation, and ease of miniaturization and integration. In addition to the research conducted in the application field, significant focus is placed on the selection and optimization of electrode interface materials for electrochemical sensors. The detection performance of these sensors can be significantly enhanced by modifying the interface of either inorganic metal electrodes or printed electrodes. Among numerous available modification materials, conductive polymers (CPs) possess not only excellent conductivity exhibited by inorganic conductors but also unique three-dimensional structural characteristics inherent to polymers. This distinctive combination allows CPs to increase active sites during the detection process while providing channels for rapid ion transmission and facilitating efficient electron transfer during reaction processes. This review article primarily highlights recent research progress concerning CPs as an ideal choice for modifying electrochemical sensors owing to their remarkable features that make them well-suited for biomedical and environmental applications.

Shaping the Future of the Neurotransmitter Sensor: Tailored CdS Nanostructures for State-of-the-Art Self-Powered Photoelectrochemical Devices

Semiconductor-based photoelectrochemical (PEC) test protocols offer a viable solution for developing efficient individual health monitoring by converting light and chemical energy into electrical signals. However, slow reaction kinetics and electron-hole complexation at the interface limit their practical application. Here, we reported a triple-engineered CdS nanohierarchical structures (CdS NHs) modification scheme including morphology, defective states, and heterogeneous structure to achieve precise monitoring of the neurotransmitter dopamine (DA) in plasma and noninvasive body fluids. By precisely manipulating the Cd-S precursor, we achieved precise control over ternary CdS NHs and obtained well-defined layered self-assembled CdS NHs through a surface carbon treatment. The integration of defect states and the thin carbon layer effectively established carrier directional transfer pathways, thereby enhancing interface reaction sites and improving the conversion efficiency. The CdS NHs microelectrode fabricated demonstrated a remarkable negative response toward DA, thereby enabling the development of a miniature self-powered PEC device for precise quantification in human saliva. Additionally, the utilization of density functional theory calculations elucidated the structural characteristics of DA and the defect state of CdS, thus establishing crucial theoretical groundwork for optimizing the polymerization process of DA. The present study offers a potential engineering approach for developing high energy conversion efficiency PEC semiconductors as well as proposing a novel concept for designing sensitive testing strategies.

Aptamer-Based Potentiometric Sensor Enables Highly Selective and Neurocompatible Neurochemical Sensing in Rat Brain

Selective and nondisruptive in vivo neurochemical monitoring within the central nervous system has long been a challenging endeavor. We introduce a new sensing approach that integrates neurocompatible galvanic redox potentiometry (GRP) with customizable phosphorothioate aptamers to specifically probe dopamine (DA) dynamics in live rat brains. The aptamer-functionalized GRP (aptGRP) sensor demonstrates nanomolar sensitivity and over a 10-fold selectivity for DA, even amidst physiological levels of major interfering species. Notably, conventional sensors without the aptamer modification exhibit negligible reactivity to DA concentrations exceeding 20 μM. Critically, the aptGRP sensor operates without altering neuronal activity, thereby permitting real-time, concurrent recordings of both DA flux and electrical signaling in vivo. This breakthrough establishes aptGRP as a viable and promising framework for the development of high-fidelity sensors, offering novel insights into neurotransmission dynamics in a live setting.

Integrated molybdenum single atom array sensors with multichannels for nitrite detection in foods

Nitrite (NO2-) is present in a variety of foods, but the excessive intake of NO2- can indirectly lead to carcinogenic, teratogenic, mutagenicity and other risks to the human body. Therefore, the detection of NO2- is crucial for maintaining human health. In this study, an integrated array sensor for NO2- detection is developed based on molybdenum single atom material (IMSMo-SAC) using high-resolution electrohydrodynamic (EHD) printing technology. The sensor comprises three components: a printed electrode array, multichannels designed on polydimethylsiloxane (PDMS) and an electronic signal process device with bluetooth. By utilizing Mo-SAC to facilitate electron transfer during the redox reaction, rapid and efficient detection of NO2- can be achieved. The sensor has a wide linear range of 0.1 μM-107.8 mM, a low detection limit of 33 nM and a high sensitivity of 0.637 mA-1mM-1 cm-2. Furthermore, employing this portable array sensor allows simultaneously measurements of NO2- concentrations in six different foods samples with acceptable recovery rates. This array sensor holds great potential for detecting of small molecules in various fields.

A first-principles study on Ni-decorated MoS2 for efficient formaldehyde degradation over a wide temperature range

The development of a high-efficiency, low-cost, and environmentally friendly catalyst for formaldehyde degradation is crucial for addressing the issue of indoor formaldehyde pollution. Given that modern individuals spend over 90% of their time indoors, effectively tackling indoor formaldehyde pollution holds significant importance. Therefore, this paper proposes an efficient catalyst for formaldehyde degradation: surface modification of MoS2 by single-atom Ni, which can convert formaldehyde into harmless H2O and CO2. The DFT method is employed to systematically investigate the oxidative degradation pathways of formaldehyde on the surface of Ni-doped MoS2. The research focuses on two common oxidative degradation pathways in both the L-H mechanism and E-R mechanism. Our findings demonstrate that these four reaction paths occur spontaneously within the temperature range of 300-800 K with a reaction equilibrium constant greater than 105. Moreover, even under extreme temperature conditions (100 K), the reaction rate remains favorable. Furthermore, our findings indicate that the minimum activation energy is merely 0.91 eV and H2O and CO2 only need to overcome an energy barrier of 0.71 eV for desorption from the catalyst surface. This substantiates its potential application both in indoor environments and under extreme temperature conditions. This theoretical research provides innovative ideas and strategies for effectively oxidizing formaldehyde.

Single-Mg-Atom Catalyst with a Dual Active Center as an Emerging Promising Sensing Platform

Bisphenol compounds [bisphenol A (BPA), etc.] are one class of the most important and widespread pollutants in food and environment, which pose severe endocrine disrupting effect, reproductive toxicity, immunotoxicity, and metabolic toxicity on humans and animals. Simultaneous rapid determination of BPA and its analogues (bisphenol S, bisphenol AF, etc.) with extraordinary potential resolution and sensitivity is of great significance but still extremely challenging. Herein, a series of single-atom catalysts (SACs) were synthesized by anchoring different metal atoms (Mg, Co, Ni, and Cu) on N-doped carbon materials and used as sensing materials for simultaneous detection of bisphenols with similar chemical structures. The Mg-based SAC enables the potential discrimination and simultaneous rapid detection of multiple bisphenols, showing outstanding analytical performances, outperforming all other SACs and traditional electrode materials. Our experiments and density functional theory calculations show that pyrrolic N serves as the adsorption site for the adsorption of bisphenols and the Mg atom serves as the active site for the electrocatalytic oxidation of bisphenols, which play a synergistic role as dual active centers in improving the sensing performance. The results of this work may pave the way for the rational design of SACs as advanced sensing and catalytic materials.

Biosignals in the Gut-Brain Axis Transmission: Function and Detection

The gut-brain axis (GBA) is an important information pathway connecting the brain, the central nervous system (CNS), and the gastrointestinal (GI) tract. On the one hand, gut microbiota can influence the function brain through GBA; on the other hand, the brain can also change the structural composition of gut microbiota via GBA. It contains a myriad of biosignals, such as monoamines, inflammatory cytokines, and macro-biomolecules, as the information carriers. Highly selective, sensitive, and reliable sensing techniques are essential to resolve the specific function of individual biosignals. This review summarizes the widely reported biosignals related to GBA and their functions, and organizes the latest sensing tools to provide feasible characterization ideas for GBA-related work. In addition, these low-cost, fast-responding sensors can also be used for early identification and diagnosis of GBA-related diseases (e.g., depression). Finally, the problems and deficiencies in this field are pointed out to provide a reference for the orientation of researchers in the sensing field.

Current Advances on the Single-Atom Nanozyme and Its Bioapplications

Nanozymes, a class of nanomaterials mimicking the function of enzymes, have aroused much attention as the candidate in diverse fields with the arbitrarily tunable features owing to the diversity of crystalline nanostructures, composition, and surface configurations. However, the uncertainty of their active sites and the lower intrinsic deficiencies of nanomaterial-initiated catalysis compared with the natural enzymes promote the pursuing of alternatives by imitating the biological active centers. Single-atom nanozymes (SAzymes) maximize the atom utilization with the well-defined structure, providing an important bridge to investigate mechanism and the relationship between structure and catalytic activity. They have risen as the new burgeoning alternative to the natural enzyme from in vitro bioanalytical tool to in vivo therapy owing to the flexible atomic engineering structure. Here, focus is mainly on the three parts. First, a detailed overview of single-atom catalyst synthesis strategies including bottom-up and top-down approaches is given. Then, according to the structural feature of single-atom nanocatalysts, the influence factors such as central metal atom, coordination number, heteroatom doping, and the metal-support interaction are discussed and the representative biological applications (including antibacterial/antiviral performance, cancer therapy, and biosensing) are highlighted. In the end, the future perspective and challenge facing are demonstrated.

Binary metal oxide (NiO/SnO2) composite with electrochemical bifunction: Detection of neuro transmitting drug and catalysis for hydrogen evolution reaction

The synergetic effect between dual oxides in binary metal oxides (BMO) makes them promising electrode materials for the detection of toxic chemicals, and biological compounds. In addition, the interaction between the cations and anions of diverse metals in BMO tends to create more oxygen vacancies which are beneficial for energy storage devices. However, specifically targeted synthesis of BMO is still arduous. In this work, we prepared a nickel oxide/tin oxide composite (NiO/SnO2) through a simple solvothermal technique. The crystallinity, specific surface area, and morphology were fully characterized. The synthesized BMO is used as a bifunctional electrocatalyst for the electrochemical detection of dopamine (DPA) and for the hydrogen evolution reaction (HER). As expected, the active metals in the NiO/SnO2 composite afforded a higher redox current at a reduced redox potential with a nanomolar level detection limit (4 nm) and excellent selectivity. Moreover, a better recovery rate is achieved in the real-time detection of DPA in human urine and DPA injection solution. Compared to other metal oxides, NiO/SnO2 composite afforded lower overpotential (157 mV @10 mA cm-2), Tafel slope (155 mV dec-1), and long-term durability, with a minimum retention rate. These studies conclude that NiO/SnO2 composite can act as a suitable electrode modifier for electrochemical sensing and the HER.

Not Only Graphene Two-Dimensional Nanomaterials: Recent Trends in Electrochemical (Bio)sensing Area for Biomedical and Healthcare Applications

Two-dimensional (2D) nanomaterials (e.g., graphene) have attracted growing attention in the (bio)sensing area and, in particular, for biomedical applications because of their unique mechanical and physicochemical properties, such as their high thermal and electrical conductivity, biocompatibility, and large surface area. Graphene (G) and its derivatives represent the most common 2D nanomaterials applied to electrochemical (bio)sensors for healthcare applications. This review will pay particular attention to other 2D nanomaterials, such as transition metal dichalcogenides (TMDs), metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and MXenes, applied to the electrochemical biomedical (bio)sensing area, considering the literature of the last five years (2018-2022). An overview of 2D nanostructures focusing on the synthetic approach, the integration with electrodic materials, including other nanomaterials, and with different biorecognition elements such as antibodies, nucleic acids, enzymes, and aptamers, will be provided. Next, significant examples of applications in the clinical field will be reported and discussed together with the role of nanomaterials, the type of (bio)sensor, and the adopted electrochemical technique. Finally, challenges related to future developments of these nanomaterials to design portable sensing systems will be shortly discussed.

Recent Progress in Transition Metal Dichalcogenides for Electrochemical Biomolecular Detection

Advances in the field of nanobiotechnology are largely due to discoveries in the field of materials. Recent developments in the field of electrochemical biosensors based on transition metal nanomaterials as transducer elements have been beneficial as they possess various functionalities that increase surface area and provide well-defined active sites to accommodate elements for rapid detection of biomolecules. In recent years, transition metal dichalcogenides (TMDs) have become the focus of interest in various applications due to their considerable physical, chemical, electronic, and optical properties. It is worth noting that their unique properties can be modulated by defect engineering and morphology control. The resulting multifunctional TMD surfaces have been explored as potential capture probes for the rapid and selective detection of biomolecules. In this review, our primary focus is to delve into the synthesis, properties, design, and development of electrochemical biosensors that are based on transition metal dichalcogenides (TMDs) for the detection of biomolecules. We aim to explore the potential of TMD-based electrochemical biosensors, identify the challenges that need to be overcome, and highlight the opportunities for further future development.

Intrinsic room-temperature ferromagnetism in a two-dimensional semiconducting metal-organic framework

The development of two-dimensional (2D) magnetic semiconductors with room-temperature ferromagnetism is a significant challenge in materials science and is important for the development of next-generation spintronic devices. Herein, we demonstrate that a 2D semiconducting antiferromagnetic Cu-MOF can be endowed with intrinsic room-temperature ferromagnetic coupling using a ligand cleavage strategy to regulate the inner magnetic interaction within the Cu dimers. Using the element-selective X-ray magnetic circular dichroism (XMCD) technique, we provide unambiguous evidence for intrinsic ferromagnetism. Exhaustive structural characterizations confirm that the change of magnetic coupling is caused by the increased distance between Cu atoms within a Cu dimer. Theoretical calculations reveal that the ferromagnetic coupling is enhanced with the increased Cu-Cu distance, which depresses the hybridization between 3d orbitals of nearest Cu atoms. Our work provides an effective avenue to design and fabricate MOF-based semiconducting room-temperature ferromagnetic materials and promotes their practical applications in next-generation spintronic devices.

Electrocatalytic Microdevice Array Based on Wafer-Scale Conductive Metal-Organic Framework Thin Film for Massive Hydrogen Production

The synthesis of large-scale 2D conductive metal-organic framework films with tunable thickness is highly desirable but challenging. In this study, an Interface Confinement Self-Assembly Pulling (ICSP) method for in situ synthesis of 4-in. Ni-BHT film on the substrate surface is developed. By modulating the thickness of the confined space, the thickness of Ni-BHT films could be easily varied from 4 to 42 nm. To eliminate interference factors and evaluate the effect of film thickness on the catalytic performance of HER, an electrocatalytic microdevice based on the Ni-BHT film is designed. The effective catalytic thickness of the Ni-BHT film is found to be around 32 nm. Finally, to prepare the electrocatalytic microdevice array, over 100 000 microdevices on a 4-in. Ni-BHT film are integrated. The results show that the microdevice array has good stability and a high hydrogen production rate and could be used to produce large amounts of hydrogen. The wafer-scale 2D conductive metal-organic framework's fabrication greatly advances the practical application of microdevices for massive hydrogen production.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Paper Sensor Modified with MoS2 for Detection of Dopamine Using a Machine-Intelligent Web App Interface

The sensing behavior of a MoS2-functionalized paper sensor towards dopamine was explored through a combinatorial approach of theoretical analysis, subsequent experimental validation, and machine-learning-driven predictive modeling of the measured electrochemical outputs. The suitability of the chosen 2D material for efficient detection of dopamine was confirmed using density functional theory. The physisorption behavior along with electrostatic interaction due to the incorporation of dopamine on MoS2 was unraveled under the purview of theoretically estimated noncovalent interaction and charge density difference plot. The theoretical Löwdin population analysis elucidates the alteration in oxidation potential of dopamine, as observed in electrochemical experiments. The electrochemical responses of the developed sensor with the spiked serum samples showed an average accuracy of more than 96% with a limit of detection of 10 nM. Furthermore, implementation of a machine-intelligent interactive web app interface improved the resolution of the sensing platform significantly with an enhanced accuracy of nearly 99%.

Laser Scribing Turns Plastic Waste into a Biosensor via the Restructuration of Nanocarbon Composites for Noninvasive Dopamine Detection

The development of affordable and compact noninvasive point-of-care (POC) dopamine biosensors for the next generation is currently a major and challenging problem. In this context, a highly sensitive, selective, and low-cost sensing probe is developed by a simple one-step laser-scribing process of plastic waste. A flexible POC device is developed as a prototype and shows a highly specific response to dopamine in the real sample (urine) as low as 100 pmol/L in a broad linear range of 10-10-10-4 mol/L. The 3D topological feature, carrier kinetics, and surface chemistry are found to improve with the formation of high-density metal-embedded graphene-foam composite driven by laser irradiation on the plastic-waste surface. The development of various kinds of flexible and tunable biosensors by plastic waste is now possible thanks to the success of this simple, but effective, laser-scribing technique, which is capable of modifying the matrix's electronic and chemical composition.

Plasmonic Coupling on an Optical Microfiber Surface: Enabling Single-Molecule and Noninvasive Dopamine Detection

Optical fibers can be effective biosensors when employed in early-stage diagnostic point-of-care devices as they can avoid interference from molecules with similar redox potentials. Nevertheless, their sensitivity needs to be improved for real-world applications, especially for small-molecule detection. This work demonstrates an optical microfiber biosensor for dopamine (DA) detection based on the DA-binding-induced aptamer conformational transitions that occur at plasmonic coupling sites on a double-amplified nanointerface. The sensor exhibits ultrahigh sensitivity when detecting DA molecules at the single-molecule level; additionally, this work provides an approach for overcoming optical device sensitivity limits, further extending optical fiber single-molecule detection to a small molecule range (e.g., DA and metal ions). The selective energy enhancement and signal amplification at the binding sites effectively avoid nonspecific amplification of the whole fiber surface which may lead to false-positive results. The sensor can detect single-molecule DA signals in body-fluids. It can detect the released extracellular DA levels and monitor the DA oxidation process. An appropriate aptamer replacement allows the sensor to be used for the detection of other target small molecules and ions at the single-molecule level. This technology offers alternative opportunities for developing noninvasive early-stage diagnostic point-of-care devices and flexible single-molecule detection techniques in theoretical research.

Recent Advances in 2D Material Theory, Synthesis, Properties, and Applications

Two-dimensional (2D) material research is rapidly evolving to broaden the spectrum of emergent 2D systems. Here, we review recent advances in the theory, synthesis, characterization, device, and quantum physics of 2D materials and their heterostructures. First, we shed insight into modeling of defects and intercalants, focusing on their formation pathways and strategic functionalities. We also review machine learning for synthesis and sensing applications of 2D materials. In addition, we highlight important development in the synthesis, processing, and characterization of various 2D materials (e.g., MXnenes, magnetic compounds, epitaxial layers, low-symmetry crystals, etc.) and discuss oxidation and strain gradient engineering in 2D materials. Next, we discuss the optical and phonon properties of 2D materials controlled by material inhomogeneity and give examples of multidimensional imaging and biosensing equipped with machine learning analysis based on 2D platforms. We then provide updates on mix-dimensional heterostructures using 2D building blocks for next-generation logic/memory devices and the quantum anomalous Hall devices of high-quality magnetic topological insulators, followed by advances in small twist-angle homojunctions and their exciting quantum transport. Finally, we provide the perspectives and future work on several topics mentioned in this review.

Single-atom nanozyme-based electrochemical sensors for health and food safety monitoring

Electrochemical sensors and biosensors play an important role in many fields, including biology, clinical trials, and food industry. For health and food safety monitoring, accurate and quantitative sensing is needed to ensure that there is no significantly negative impact on human health. It is difficult for traditional sensors to meet these requirements. In recent years, single-atom nanozymes (SANs) have been successfully used in electrochemical sensors due to their high electrochemical activity, good stability, excellent selectivity and high sensitivity. Here, we first summarize the detection principle of SAN-based electrochemical sensors. Then, we review the detection performances of small molecules on SAN-based electrochemical sensors, including H₂O₂, dopamine (DA), uric acid (UA), glucose, H₂S, NO, and O₂. Subsequently, we put forward the optimization strategies to promote the development of SAN-based electrochemical sensors. Finally, the challenges and prospects of SAN-based sensors are proposed.

Single-Atom Indium Boosts Electrochemical Dopamine Sensing

A rational design of high-efficiency electrocatalysts and thus achieving sensitive electrochemical sensing remains a great challenge. In this work, single-atom indium anchored on nitrogen-doped carbon (In₁-N-C) with an In-N₄ configuration is prepared successfully through a high-temperature annealing strategy; the product can serve as an advanced electrocatalyst for sensitive electrochemical sensing of dopamine (DA). Compared with In nanoparticle catalysts, In₁-N-C exhibits high catalytic performance for DA oxidation. The theoretical calculation reveals that In₁-N-C has high adsorption energy for hydroxy groups and a low energy barrier in the process of DA oxidation compared to In nanoparticles, indicating that In₁-N-C with atomically dispersed In-N₄ sites possesses enhanced intrinsic activity. An electrochemical sensor for DA detection is established as a concept application with high sensitivity and selectivity. Furthermore, we also verify the feasibility of In₁-N-C catalysts for the simultaneous detection of uric acid, ascorbic acid, and DA. This work extends the application prospect of p-block metal single-atom catalysts in electrochemical sensing.

Integrated Biochip-Electronic System with Single-Atom Nanozyme for in Vivo Analysis of Nitric Oxide

Nitric oxide (NO) exhibits a crucial role in various versatile and distinct physiological functions. Hence, its real-time sensing is highly important. Herein, we developed an integrated nanoelectronic system comprising a cobalt single-atom nanozyme (Co-SAE) chip array sensor and an electronic signal processing module (IND_Co-SAE) for both in vitro and in vivo multichannel qualifying of NO in normal and tumor-bearing mice. The high atomic utilization and catalytic activity of Co-SAE endowed an ultrawide linear range for NO varying from 36 to 4.1 × 10⁵ nM with a low detection limit of 12 nM. Combining in situ attenuated total reflectance surface enhanced infrared spectroscopy (ATR-SEIRAS) measurements and density function calculation revealed the activating mechanism of Co-SAE toward NO. The NO adsorption on an active Co atom forms *NO, followed by the reaction between *NO and OH^-, which could help design relevant nanozymes. Further, we investigated the NO-producing behaviors of various organs of both normal and tumor-bearing mice using the proposed device. We also evaluated the NO yield produced by the wounded mouse using the designed device and found it to be approximately 15 times that of the normal mouse. This study bridges the technical gap between a biosensor and an integrated system for molecular analysis in vitro and in vivo. The as-fabricated integrated wireless nanoelectronic system with multiple test channels significantly improved the detection efficiency, which can be widely used in designing other portable sensing devices with multiplexed analysis capability.

Energies Exploration for the Troponine Molecule Supported on Carbon Nanomaterials: DFT Study

Density functional theory calculations have been used to elucidate structural parameters of pristine cardiac Troponin I and its interaction with carbon nanomaterials. In this case, zigzag single-walled carbon nanotubes and graphene sheets were selected. Troponin I interacted horizontally (leusine terminal) and vertically (lysine terminal) with the nanomaterials. Cohesion and binding energies, band gaps, and charge transfer for the systems were obtained. Cohesion for troponin I supported on graphene and single-walled carbon nanotube in the horizontal position was found to be the most viable system. Binding for the interaction between troponin I and a nanotube in the horizontal position was found to be the most stable with a value of 0.002 eV that increases to 0.004 eV with a van der Waals correction. Furthermore, the density of states exhibits an improvement in band gap for graphene sheets, and finally, a higher charge transfer was reported for troponin I in its horizontal form supported on a zigzag single-walled carbon nanotube.

Atomically Dispersed ZnN5 Sites Immobilized on g-C3 N4 Nanosheets for Ultrasensitive Selective Detection of Phenanthrene by Dual Ratiometric Fluorescence

Ultrasensitively selective detection of trace polycyclic aromatic hydrocarbons (PAHs) like phenanthrene (PHE) is critical but remains challenging. Herein, atomically dispersed Zn sites on g-C₃ N₄ nanosheets (sZn-CN) are constructed by thermal polymerization of a Zn-cyanuric acid-melamine supramolecular precursor for the fluorescence detection of PHE. A high amount (1.6 wt%) of sZn is grafted in the cave of CN with one N vacancy in the form of unique Zn(II)N₅ coordination. The optimized sZn-CN achieves a wide detection range (1 ng L^-1 to 5 mg L^-1 ), ultralow detection limit (0.35 ng L^-1 , with 5-order magnitude improvement over CN), and ultrahigh selectivity toward PHE even among typical PAHs based on the built PHE-CN dual ratiometric fluorescence method. By means of in situ Fourier transform infrared spectroscopy, time-resolved absorption and fluorescence spectroscopy, and theoretical calculations, the resulting superior detection performance is attributed to the favorable selective adsorption of PHE on as-constructed atomic Zn(II)N₅ sites via the ionic cation-π interactions (Zn^δ+ C₂ ^δ- type), and the fluorescence quenching is dominated by the inner filter effect (IFE) from the multilayer adsorption of PHE at low concentrations, while it is done by the protruded photogenerated electron-transfer process, as well as IFE from the monolayer adsorption of PHE at ultralow concentration.

Advanced Strategies in Synthesis of Two-Dimensional Materials with Different Compositions and Phases

In recent years, 2D materials-M_a X_b with different compositions and phases have attracted tremendous attention due to their diverse structures and electronic features. The common thermodynamically stable 2H and metastable 1T phases have been extensively studied, however, there are many unusual compositions and phases with novel physical properties that have yet to be explored. Therefore, summarization of the synthesis strategies, atomic structures, and the unique physical properties of 2D materials with different compositions and phases is very important for their development. In this review, the strategies including chemical vapor deposition, intercalation, atomic layer deposition, chemical vapor transport, and electrostatic gating for synthesizing various 2D materials with different phases and compositions are first summarized. Specially, the intercalation strategies including heterogeneous- and self-intercalation for controllable phases and compositions fabrication are mainly discussed. Then, the novel atomic structures of 2D materials are analyzed, followed by the fascinating physical properties including ferroelectricity, ferromagnetism, superconductivity, and so on. Finally, the conclusion and outlook are offered including the challenges and future prospects of 2D materials with different compositions and phases.

Single-Site SnOCu Pairs with Interfacial Electron Transfer Effect for Enhanced Electrochemical Catalysis and Sensing

As advanced electrochemical catalysts, single-atom catalysts have made great progress in the field of catalysis and sensing due to their high atomic utilization efficiency and excellent catalytic performance. Herein, stannum-doped copper oxide (CuOSn₁ ) nanosheets with single-site SnOCu pairs as active sites are synthesized as electrocatalysts for biological molecule detection. Compared with CuO-based electrochemical sensors, the CuOSn₁ -based electrochemical sensors have improved detection sensitivity with a rapid electrochemical response. Theoretical calculation reveals that the single-site SnOCu pairs induced interfacial electronic transfer effect can strengthen hydroxy adsorption and thus reduce the energy barrier of the biological molecule oxidation process. As a concept application, electrochemical detection of dopamine and uric acid molecules is achieved, exhibiting satisfactory sensitivity and selectivity. This work demonstrates the advantages of single-site SnOCu pairs in electrochemical catalysis and sensing, which provides theoretical guidance for understanding the structure-activity relationship for sensitive electrochemical sensing.

Facile Process for Fabrication of Silicon Micro-Nanostructures of Different Shapes as Molds for Fabricating Flexible Micro-Nanostructures and Wearable Sensors

We report a method to fabricate silicon micro-nanostructures of different shapes by tuning the number of layers and the sizes of self-assembled polystyrene beads, which serve as the mask, and by tuning the reactive ion etching (RIE) time. This process is simple, scalable, and inexpensive without using any sophisticated nanomanufacturing equipment. Specifically, in this work, we demonstrate the proposed process by fabricating silicon micro- or nanoflowers, micro- or nanobells, nanopyramids, and nanotriangles using a self-assembled monolayer or bilayer of polystyrene beads as the mask. We also fabricate flexible micro-nanostructures by using silicon molds with micro-nanostructures. Finally, we demonstrate the fabrication of bandage-type electrochemical sensors with micro-nanostructured working electrodes for detecting dopamine, a neurotransmitter related to stress and neurodegenerative diseases in artificial sweat. All these demonstrations indicate that the proposed process provides a low-cost, easy-to-use approach for fabricating silicon micro-nanostructures and flexible micro-nanostructures, thus paving a way for developing wearable micro-nanostructures enabled sensors for a variety of applications in an efficient manner.

Wearable chemical sensors based on 2D materials for healthcare applications

Chemical sensors worn on the body could make possible the continuous, noninvasive, and accurate monitoring of vital human signals, which is necessary for remote health monitoring and telemedicine. Attractive for creating high-performance, wearable chemical sensors are atomically thin materials with intriguing physical features, abundant chemistry, and high surface-to-volume ratios. These advantages allow for appropriate material-analyte interactions, resulting in a high level of sensitivity even at trace analyte concentrations. Previous review articles covered the material and device elements of 2D material-based wearable devices extensively. In contrast, little research has addressed the existing state, future outlook, and promise of 2D materials for wearable chemical sensors. We provide an overview of recent advances in 2D-material-based wearable chemical sensors to overcome this deficiency. The structure design, manufacturing techniques, and mechanisms of 2D material-based wearable chemical sensors will be evaluated, as well as their applicability in human health monitoring. Importantly, we present a thorough review of the current state of the art and the technological gaps that would enable the future design and nanomanufacturing of 2D materials and wearable chemical sensors. Finally, we explore the challenges and opportunities associated with designing and implementing 2D wearable chemical sensors.

Biocompatible Microelectrode for In Vivo Sensing with Improved Performance

In vivo sensing based on implantable microelectrodes has been widely used to monitor neurochemicals due to its high spatial and temporal resolution and engineering interface designability, which has become a powerful drive to decode the mysteries of degenerative diseases and regulate neural activity. Over the past few decades, with the development of a variety of advanced materials and technologies, encouraging progress has been made in quantifying various neurochemical transients. However, because of the complex chemical atmosphere including thousands of small and large biomolecules and the inherent low mechanical property of brain tissue, the design of a compatible microelectrode for the in vivo electrochemical tracking of neurochemicals with high selectivity and stability still faces great challenges. This Perspective presents a brief account of recent representative progress in the rational regulation of the microelectrode interface to resolve the questions of selectivity and sensitive decrease resulting from antiprotein adsorption, and how to decrease the mechanical mismatch of an implanted electrode with that of brain tissue. Possible future research directions on further addressing the above key issues and a more biocompatible microelectrode for in vivo long-time electrochemical analysis are also discussed.

Spatial Control of Substitutional Dopants in Hexagonal Monolayer WS2 : The Effect of Edge Termination

The ability to control the density and spatial distribution of substitutional dopants in semiconductors is crucial for achieving desired physicochemical properties. Substitutional doping with adjustable doping levels has been previously demonstrated in 2D transition metal dichalcogenides (TMDs); however, the spatial control of dopant distribution remains an open field. In this work, edge termination is demonstrated as an important characteristic of 2D TMD monocrystals that affects the distribution of substitutional dopants. Particularly, in chemical vapor deposition (CVD)-grown monolayer WS₂ , it is found that a higher density of transition metal dopants is always incorporated in sulfur-terminated domains when compared to tungsten-terminated domains. Two representative examples demonstrate this spatial distribution control, including hexagonal iron- and vanadium-doped WS₂ monolayers. Density functional theory (DFT) calculations are further performed, indicating that the edge-dependent dopant distribution is due to a strong binding of tungsten atoms at tungsten-zigzag edges, resulting in the formation of open sites at sulfur-zigzag edges that enable preferential dopant incorporation. Based on these results, it is envisioned that edge termination in crystalline TMD monolayers can be utilized as a novel and effective knob for engineering the spatial distribution of substitutional dopants, leading to in-plane hetero-/multi-junctions that display fascinating electronic, optoelectronic, and magnetic properties.

Atomic Dispersion of Zn2+ on N-Doped Carbon Materials: From Non-Activity to High Activity for Catalyzing Luminol-H2O2 Chemiluminescence

Fe and Co single-atom catalysts (SACs) have been widely explored in many fields, while Zn SACs are still in their infancy stage. Herein, we unexpectedly found that atomically dispersed Zn²⁺ on N-doped carbon material (Zn-N-C) exhibited high catalytic activity on luminol-H₂O₂ chemiluminescence (CL) reaction. The Zn-N-C SACs were readily prepared through simple pyrolyzation of the cheap precursors (dopamine and ZnCl₂). The mechanism of Zn SAC-catalyzed CL reaction of luminol-H₂O₂ was investigated in detail. The activity of Zn SACs originated from the Zn-N sites in the Zn-N-C structure. The monoatomic dispersion makes Zn²⁺ catalytic performance change from no activity to high activity in luminol-H₂O₂ CL reaction. This study demonstrated the particularity of the monatomic metal catalyst over the conventional metal ion. This work provides the unprecedented perspective for design of new metal SACs in CL reaction.

Dense Conductive Metal-Organic Frameworks as Robust Electrocatalysts for Biosensing

Due to the fascinating properties such as high porosity, large surface areas, and tunable chemical components, metal-organic frameworks (MOFs) have emerged in many fields including catalysis, energy storage, and gas separation. However, the intrinsic electrical insulation of MOFs severely restricts their application in electrochemistry. Here, we synthesize a series of 2D conductive MOFs (cMOFs) through tuning the structure with atomic precision using simple hydrothermal methods. Various electroactive probes are used to reveal the structure-property relationships in 2D cMOFs. Then, we demonstrate the first exploration and implementation of 2D cMOFs toward the construction of electrochemical biosensors. In particular, the biosensor based on Cu₃(tetrahydroxy-1,4-quinone)₂ [Cu₃(THQ)₂] displays a remarkably improved electrocatalytic performance at a much lower potential. The mechanism study reveals the essential role of charge-transfer interactions between the dense catalytic sites of Cu₃(THQ)₂ and analytes. Furthermore, the Cu₃(THQ)₂-based biosensor demonstrates robust anti-interference capability, good stability, fast response speed, and an ultralow detection limit for paraoxon. These promising results indicate the great potential of cMOFs in biomedical, food safety, and environmental sensing applications.

Fabrication of paper-based microfluidic devices using a 3D printer and a commercially-available wax filament

In this work, we developed an alternative manufacturing paper-based microfluidics method through 3D printing and wax filament. Microfluidic paper-based analytical devices (μPADs) are low-cost and easy-to-manufacture tools used for various chemical and biological analyses and studies. Paper-based microfluidics with wax has been limited as the manufacturers have discontinued most wax printing equipment. We aim to develop a low-cost and accessible manufacturing method that can replace conventional wax-on paper-based microfluidic manufacturing methods. Using highly available commercial 3D printing technology and wax filament, we could create hydrophobic wax barriers on the surface of different paper types. The properties and limits of this manufacturing method were characterized. Moreover, using this paper-based microfluidic manufacturing method, we were able to measure dopamine electrochemically using μPAD as a passive flow-based method in concentrations as low as 1 nM using injections as small as 15 μL.

2D Conductive Covalent Organic Frameworks with Abundant Carbonyl Groups for Electrochemical Sensing

Due to their permanent porosity, robust chemical stability, and tunable structure, covalent organic frameworks (COFs) are very attractive in the application of energy storage, catalysis, sorption, and sensing. However, the very low conductivity of COFs severely restricts their application in electrochemical sensing. Here, an aza-fused π-conjugated COFs with abundant carbonyl groups (COF1) was synthesized and deployed as electrode materials in electrochemical sensing for the first time. The current response of the acetylcholinesterase biosensor based on COF1 increases three times when compared to the electrode without COF1. The effects of carbonyl groups on signal enhancement were proved in depth by a series of characterization and comparison experiments with the prepared COF2 without carbonyl groups. The results demonstrated that exposed carbonyl active sites of COF1 can promote the effective immobilization and bioactivity preserving of enzyme molecules and contribute to the enrichment of analytes. Together with the good conductivity of COF1 derived from a fully extended 2D aromatized π-conjugated system, all of which improve the biosensor performance. The COF1-based biosensor exhibited fast response speed, high sensitivity, good selectivity and practicability, and robust stability for organophosphorus pesticide detection and proved to be a promising tool for the rapid and onsite detection of organophosphorus pesticides in the environment.

Ultrasensitive NO Sensor Based on a Nickel Single-Atom Electrocatalyst for Preliminary Screening of COVID-19

A new coronavirus, SARS-CoV-2, has caused the coronavirus disease-2019 (COVID-19) epidemic. A rapid and economical method for preliminary screening of COVID-19 may help to control the COVID-19 pandemic. Here, we report a nickel single-atom electrocatalyst that can be printed on a paper-printing sensor for preliminary screening of COVID-19 suspects by efficient detection of fractional exhaled nitric oxide (FeNO). The FeNO value is confirmed to be related to COVID-19 in our exploratory clinical study, and a machine learning model that can accurately classify healthy subjects and COVID-19 patients is established based on FeNO and other features. The nickel single-atom electrocatalyst consists of a single nickel atom with N₂O₂ coordination embedded in porous acetylene black (named Ni-N₂O₂/AB). A paper-printed sensor was fabricated with the material and showed ultrasensitive response to NO in the range of 0.3-180 ppb. This ultrasensitive sensor could be applied to preliminary screening of COVID-19 in everyday life.