Hygromechanical mechanisms of wood cell wall revealed by molecular modeling and mixture rule analysis

Bamboo as a substitute for plastic: Effects of moisture content on the flexibility and flexural toughness of bamboo with cellulose fibers at multiple scales

To develop curved bamboo-based products for promoting "bamboo as a substitute for plastic" by deep-molding and high-curvature winding technology, it is urgent to fully understand the effects of moisture content (MC) on flexural properties of bamboo with cellulose fibers at multiple scales. Here, we tested the 3-point flexural behavior of bamboo with cellulose fibers at different MC (0, 5 %, 10 %, 25 % and 50 %), in conjunction with in situ nanoindentation (NI) and environmental scanning electron microscopy (ESEM) to investigate its flexibility and toughness mechanisms. The results showed that gradient distribution of cellulose fibers embedded in soft parenchyma cells adapted to external stresses resulting in bamboo's excellent flexibility and toughness. Low MC (5 %, 10 %) made bamboo more flexible and tougher. The flexibility mechanism acting at the molecular scale was moisture-promoted softening of the lignin-carbohydrate (LCC) complex in the cell wall, and interface slip between the cellulose/LCC caused by water molecules aggregating verified by in situ NI and FTIR spectra, whereas toughness mechanisms originated from the coupling of transwall fracture and fibrils-exposed cellwall tearing, as well as tortuous crack propagation. High MC (25 % and 50 %) impaired flexibility and toughness via intercellular and fibrils-LCC interfacial debonding at multiple scales.

Plant Cell Wall-Like Soft Materials: Micro- and Nanoengineering, Properties, and Applications

Plant cell wall (CW)-like soft materials, referred to as artificial CWs, are composites of assembled polymers containing micro-/nanoparticles or fibers/fibrils that are designed to mimic the composition, structure, and mechanics of plant CWs. CW-like materials have recently emerged to test hypotheses pertaining to the intricate structure-property relationships of native plant CWs or to fabricate functional materials. Here, research on plant CWs and CW-like materials is reviewed by distilling key studies on biomimetic composites primarily composed of plant polysaccharides, including cellulose, pectin, and hemicellulose, as well as organic polymers like lignin. Micro- and nanofabrication of plant CW-like composites, characterization techniques, and in silico studies are reviewed, with a brief overview of current and potential applications. Micro-/nanofabrication approaches include bacterial growth and impregnation, layer-by-layer assembly, film casting, 3-dimensional templating microcapsules, and particle coating. Various characterization techniques are necessary for the comprehensive mechanical, chemical, morphological, and structural analyses of plant CWs and CW-like materials. CW-like materials demonstrate versatility in real-life applications, including biomass conversion, pulp and paper, food science, construction, catalysis, and reaction engineering. This review seeks to facilitate the rational design and thorough characterization of plant CW-mimetic materials, with the goal of advancing the development of innovative soft materials and elucidating the complex structure-property relationships inherent in native CWs.

Atomistic Simulations of Mechanical Properties of Lignin

The mechanical properties of lignin, an aromatic heteropolymer constituting 20-30% plant biomass, are important to the fabrication and processing of lignin-based sustainable polymeric materials. In this study, atomistic simulations are performed to provide microscopic insights into the mechanics of lignin. Representative samples of miscanthus, spruce, and birch lignin are studied. At room temperature below the glass transition temperature, the stress-strain curves for uniaxial compression and tensile loading are calculated and analyzed. The results show that lignin possesses rigidity with a Young's modulus in the order of GPa and exhibits strain hardening under strong compression. Meanwhile, lignin is brittle and fails through the microscopic mechanism of cavitation and chain pullout under local tensile loading. In addition to the three common lignin samples, minimalist model systems of monodisperse linear chains consisting of only guaiacyl units and β-O-4 linkages are simulated. Systematic variation of the model lignin chain length allows a focused examination of the molecular weight effects. The results show that the molecular weight does not affect the Young's modulus much, but higher molecular weight results in stronger strain hardening under compression. In the range of molecular weight studied, the lignin chains are not long enough to arrest the catastrophic chain pullout, explaining the brittleness of real lignin samples. This work demonstrates that the recently modified CHARMM force fields and the accompanying structural information of real lignin samples properly capture the mechanics of lignin, offering an in silico microscope to explore the atomistic details necessary for the valorizaiton of lignin.

Advancing plant cell wall modelling: Atomistic insights into cellulose, disordered cellulose, and hemicelluloses - A review

The complexity of plant cell walls on different hierarchical levels still impedes the detailed understanding of biosynthetic pathways, interferes with processing in industry and finally limits applicability of cellulose materials. While there exist many challenges to readily accessing these hierarchies at (sub-) angström resolution, the development of advanced computational methods has the potential to unravel important questions in this field. Here, we summarize the contributions of molecular dynamics simulations in advancing the understanding of the physico-chemical properties of natural fibres. We aim to present a comprehensive view of the advancements and insights gained from molecular dynamics simulations in the field of carbohydrate polymers research. The review holds immense value as a vital reference for researchers seeking to undertake atomistic simulations of plant cell wall constituents. Its significance extends beyond the realm of molecular modeling and chemistry, as it offers a pathway to develop a more profound comprehension of plant cell wall chemistry, interactions, and behavior. By delving into these fundamental aspects, the review provides invaluable insights into future perspectives for exploration. Researchers within the molecular modeling and carbohydrates community can greatly benefit from this resource, enabling them to make significant strides in unraveling the intricacies of plant cell wall dynamics.

Dissolution behavior of ionic liquids for different ratios of lignin and cellulose in the preparation of nanocellulose/lignin blends

Lignin is regarded as a potential solution for boosting the strength of cellulose-based products. However, the mechanism of co-solubilization for lignin and cellulose has not been investigated. In this study, the effect of lignin content on the interaction between lignin and nanocellulose during lignin/cellulose co-dissolution was examined. The results revealed that lignin binds to nanocellulose throughout the dissolution process to limit the degradation of cellulose and to prepare nanocellulose/lignin composites. Moreover, the S units in lignin were more likely to interact with cellulose during the dissolution process, whereas the G units were more likely to condense. However, when the lignin content exceeded 30 wt%, the excess lignin created a severe condensation reaction, which led to a decrease in the lignin content bound to cellulose, resulting in an unequal dissolution of cellulose. Thus, a small amount of lignin attached to cellulose during the co-dissolution of lignin and cellulose inhibits cellulose degradation and can be utilized to create nanocellulose/lignin to extend the potential applications of nanocellulosic materials.

Atomistic, macromolecular model of the Populus secondary cell wall informed by solid-state NMR

Plant secondary cell walls (SCWs) are composed of a heterogeneous interplay of three major biopolymers: cellulose, hemicelluloses, and lignin. Details regarding specific intermolecular interactions and higher-order architecture of the SCW superstructure remain ambiguous. Here, we use solid-state nuclear magnetic resonance (ssNMR) measurements to infer refined details about the structural configuration, intermolecular interactions, and relative proximity of all three major biopolymers within air-dried Populus wood. To enhance the utility of these findings and enable evaluation of hypotheses in a physics-based environment in silico, the NMR observables are articulated into an atomistic, macromolecular model for biopolymer assemblies within the plant SCW. Through molecular dynamics simulation, we quantitatively evaluate several variations of atomistic models to determine structural details that are corroborated by ssNMR measurements.

Hygroscopic Tunable Multishape Memory Effect in Cellulosic Macromolecular Networks with a Supramolecular Mesophase

Tunable multishape memory polymers offer intriguing opportunities for memorizing multiple temporary shapes with tunable transition temperatures from one material composition. However, such multishape memory effects have been exclusively correlated with the thermomechanical behaviors of polymers, significantly limiting their applications in heat-sensitive scenarios. Here we report a nonthermal tunable multishape memory effect in covalently cross-linked cellulosic macromolecular networks, which spontaneously organize into supramolecular mesophases by water evaporation induced self-assembly. The supramolecular mesophase endows the network with a broad, reversible hygromechanical response combined with a unique moisture memory effect at ambient temperature, enabling diverse multishape memory behaviors (dual-, triple-, and quadruple-shape memory) under highly tunable and independent control of relative humidity (RH) alone. Significantly, such a hygroscopic tunable multishape memory effect readily extends the implications of shape memory polymers beyond the conventional thermomechanical regimes with potential advantages for biomedical applications.

Sorption-Deformation-Percolation Model for Diffusion in Nanoporous Media

Diffusion of molecules in porous media is a critical process that is fundamental to numerous chemical, physical, and biological applications. The prevailing theoretical frameworks are challenged when explaining the complex dynamics resulting from the highly tortuous host structure and strong guest-host interactions, especially when the pore size approximates the size of diffusing molecule. This study, using molecular dynamics, formulates a semiempirical model based on theoretical considerations and factorization that offer an alternative view of diffusion and its link with the structure and behavior (sorption and deformation) of material. By analyzing the intermittent dynamics of water, microscopic self-diffusion coefficients are predicted. The apparent tortuosity, defined as the ratio of the bulk to the confined self-diffusion coefficients, is found to depend quantitatively on a limited set of material parameters: heat of adsorption, elastic modulus, and percolation probability, all of which are experimentally accessible. The proposed sorption-deformation-percolation model provides guidance on the understanding and fine-tuning of diffusion.

Building an extensible cell wall

This article recounts, from my perspective of four decades in this field, evolving paradigms of primary cell wall structure and the mechanism of surface enlargement of growing cell walls. Updates of the structures, physical interactions, and roles of cellulose, xyloglucan, and pectins are presented. This leads to an example of how a conceptual depiction of wall structure can be translated into an explicit quantitative model based on molecular dynamics methods. Comparison of the model's mechanical behavior with experimental results provides insights into the molecular basis of complex mechanical behaviors of primary cell wall and uncovers the dominant role of cellulose-cellulose interactions in forming a strong yet extensible network.

Water as an Intrinsic Structural Element in Cellulose Fibril Aggregates

While strong water association with cellulose in plant cell walls and man-made materials is well-established, its molecular scale aspects are not fully understood. The thermodynamic consequences of having water molecules located at the microfibril-microfibril interfaces in cellulose fibril aggregates are therefore analyzed by molecular dynamics simulations. We find that a thin layer of water molecules at those interfaces can be in a state of thermal equilibrium with water surrounding the fibril aggregates because such an arrangement lowers the free energy of the total system. The main reason is enthalpic: water at the microfibril-microfibril interfaces enables the cellulose surface hydroxyls to experience a more favorable electrostatic environment. This enthalpic gain overcomes the entropic penalty from strong immobilization of water molecules. Hence, those particular water molecules stabilize the cellulose fibril aggregates, akin to the role of water in some proteins. Structural and functional hypotheses related to this finding are presented.