Highly stretchable and self-healable polymer gels from physical entanglements of ultrahigh-molecular weight polymers

Glassy gels toughened by solvent

Glassy polymers are generally stiff and strong yet have limited extensibility1. By swelling with solvent, glassy polymers can become gels that are soft and weak yet have enhanced extensibility1-3. The marked changes in properties arise from the solvent increasing free volume between chains while weakening polymer-polymer interactions. Here we show that solvating polar polymers with ionic liquids (that is, ionogels4,5) at appropriate concentrations can produce a unique class of materials called glassy gels with desirable properties of both glasses and gels. The ionic liquid increases free volume and therefore extensibility despite the absence of conventional solvent (for example, water). Yet, the ionic liquid forms strong and abundant non-covalent crosslinks between polymer chains to render a stiff, tough, glassy, and homogeneous network (that is, no phase separation)6, at room temperature. Despite being more than 54 wt% liquid, the glassy gels exhibit enormous fracture strength (42 MPa), toughness (110 MJ m-3), yield strength (73 MPa) and Young's modulus (1 GPa). These values are similar to those of thermoplastics such as polyethylene, yet unlike thermoplastics, the glassy gels can be deformed up to 670% strain with full and rapid recovery on heating. These transparent materials form by a one-step polymerization and have impressive adhesive, self-healing and shape-memory properties.

Multifunctional Polyoxometalates-Based Ionohydrogels toward Flexible Electronics

Multifunctional flexible electronics present tremendous opportunities in the rapidly evolving digital age. One potential avenue to realize this goal is the integration of polyoxometalates (POMs) and ionic liquid-based gels (ILGs), but the challenge of macrophase separation due to poor compatibility, especially caused by repulsion between like-charged units, poses a significant hurdle. Herein, the possibilities of producing diverse and homogenous POMs-containing ionohydrogels by nanoconfining POMs and ionic liquids (ILs) within an elastomer-like polyzwitterionic hydrogel using a simple one-step random copolymerization method, are expanded vastly. The incorporation of polyzwitterions provides a nanoconfined microenvironment and effectively modulates excessive electrostatic interactions in POMs/ILs/H2O blending system, facilitating a phase transition from macrophase separation to a submillimeter scale worm-like microphase-separation system. Moreover, combining POMs-reinforced ionohydrogels with a developed integrated self-powered sensing system utilizing strain sensors and Zn-ion hybrid supercapacitors has enabled efficient energy storage and detection of external strain changes with high precision. This work not only provides guidelines for manipulating morphology within phase-separation gelation systems, but also paves the way for developing versatile POMs-based ionohydrogels for state-of-the-art smart flexible electronics.

A General Strategy for Sustainable 3D Printing Based on A Multifunctional Photoinitiator

A multifunctional photoinitiator is presented, offering precise control over light-induced polymerization initiation at 450 nm and material degradation at 365 nm. This is accomplished by covalently linking photoactive bis(acyl)phosphane oxide and photocleavable o-nitrobenzyl ether moieties onto the surface of γ-cyclodextrin. Upon degradation, the resulting linear polymers can be easily re-dissolved in their corresponding monomer and re-cured, exhibiting superior mechanical properties compared to the pristine material. Moreover, this photoinitiator enables the successful 3D printing of intricate and precise structures, representing a promising general strategy for developing recyclable photoresins for 3D printing applications.

Bicontinuous vitrimer heterogels with wide-span switchable stiffness-gated iontronic coordination

Currently, it remains challenging to balance intrinsic stiffness with programmability in most vitrimers. Simultaneously, coordinating materials with gel-like iontronic properties for intrinsic ion transmission while maintaining vitrimer programmable features remains underexplored. Here, we introduce a phase-engineering strategy to fabricate bicontinuous vitrimer heterogel (VHG) materials. Such VHGs exhibited high mechanical strength, with an elastic modulus of up to 116 MPa, a high strain performance exceeding 1000%, and a switchable stiffness ratio surpassing 5 × 103. Moreover, highly programmable reprocessing and shape memory morphing were realized owing to the ion liquid-enhanced VHG network reconfiguration. Derived from the ion transmission pathway in the ILgel, which responded to the wide-span switchable mechanics, the VHG iontronics had a unique bidirectional stiffness-gated piezoresistivity, coordinating both positive and negative piezoresistive properties. Our findings indicate that the VHG system can act as a foundational material in various promising applications, including smart sensors, soft machines, and bioelectronics.

Designing Ultratough Single-Network Hydrogels with Centimeter-Scale Fractocohesive Lengths via Inelastic Crack Blunting

Fractocohesive length, defined as the ratio of fracture toughness to work of fracture, measures the sensitivity of materials to fracture in the presence of flaws. The larger the fractocohesive length, the more flaw-tolerant and crack-resistant the hydrogel. For synthetic soft materials, the fractocohesive length is short, often on the scale of 1 mm. Here, highly flaw-insensitive (HFI) single-network hydrogels containing an entangled inhomogeneous polymer network of widely distributed chain lengths are designed. The HFI hydrogels demonstrate a centimeter-scale fractocohesive length of 2.21 cm, which is the highest ever recorded for synthetic hydrogels, and an unprecedented fracture toughness of ≈13 300 J m-2 . The uncommon flaw insensitivity results from the inelastic crack blunting inherent to the highly inhomogeneous network. When the HFI hydrogel is stretched, a large number of short chains break while coiled long chains can disentangle, unwind, and straighten, producing large inelastic deformation that substantially blunts the crack tip in a plastic manner, thereby deconcentrating crack-tip stresses and blocking crack extension. The flaw-insensitive design strategy is applicable to various hydrogels such as polyacrylamide and poly(N,N-dimethylacrylamide) hydrogels and enables the development of HFI soft composites.

Controlled mechanical properties of poly(ionic liquid)-based hydrophobic ion gels by the introduction of alumina nanoparticles with different shapes

Ionic-liquid gels, also known as ion gels, have gained considerable attention due to their high ionic conductivity and CO2 absorption capacity. However, their low mechanical strength has hindered their practical applications. A potential solution to this challenge is the incorporation of particles, such as silica nanoparticles, TiO2 nanoparticles, and metal-organic frameworks (MOFs) into ion gels. Comparative studies on the effect of particles with different shapes are still in progress. This study investigated the effect of the shape of particles introduced into ion gels on their mechanical properties. Consequently, alumina/poly(ionic liquid) (PIL) double-network (DN) ion gels consisting of clustered alumina nanoparticles with various shapes (either spherical or rod-shaped) and a chemically crosslinked poly[1-ethyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide] (PC2im-TFSI, PIL) network were prepared. The results revealed that the mechanical strengths of the alumina/PIL DN ion gels were superior to those of PIL single-network ion gels without particles. Notably, the fracture energies of the rod-shaped alumina/PIL DN ion gels were approximately 2.6 times higher than those of the spherical alumina/PIL DN ion gels. Cyclic tensile tests were performed, and the results indicate that the loading energy on the ion gel was dissipated through the fracture of the alumina network. TEM observation suggests that the variation in the mechanical strength depending on the shape can be attributed to differences in the aggregation structure of the alumina particles, thus indicating the possibility of tuning the mechanical strength of ion gels by altering not only particle kinds but its shape.

Self-compliant ionic skin by leveraging hierarchical hydrogen bond association

Robust interfacial compliance is essential for long-term physiological monitoring via skin-mountable ionic materials. Unfortunately, existing epidermal ionic skins are not compliant and durable enough to accommodate the time-varying deformations of convoluted skin surface, due to an imbalance in viscosity and elasticity. Here we introduce a self-compliant ionic skin that consistently works at the critical gel point state with almost equal viscosity and elasticity over a super-wide frequency range. The material is designed by leveraging hierarchical hydrogen bond association, allowing for the continuous release of polymer strands to create topological entanglements as complementary crosslinks. By embodying properties of rapid stress relaxation, softness, ionic conductivity, self-healability, flaw-insensitivity, self-adhesion, and water-resistance, this ionic skin fosters excellent interfacial compliance with cyclically deforming substrates, and facilitates the acquisition of high-fidelity electrophysiological signals with alleviated motion artifacts. The presented strategy is generalizable and could expand the applicability of epidermal ionic skins to more complex service conditions.

Circular Polydiketoenamine Elastomers with Exceptional Creep Resistance via Multivalent Cross-Linker Design

Elastomers are widely used in textiles, foam, and rubber, yet they are rarely recycled due to the difficulty in deconstructing polymer chains to reusable monomers. Introducing reversible bonds in these materials offers prospects for improving their circularity; however, concomitant bond exchange permits creep, which is undesirable. Here, we show how to architect dynamic covalent polydiketoenamine (PDK) elastomers prepared from polyetheramine and triketone monomers, not only for energy-efficient circularity, but also for outstanding creep resistance at high temperature. By appending polytopic cross-linking functionality at the chain ends of flexible polyetheramines, we reduced creep from >200% to less than 1%, relative to monotopic controls, producing mechanically robust and stable elastomers and carbon-reinforced rubbers that are readily depolymerized to pure monomer in high yield. We also found that the multivalent chain end was essential for ensuring complete PDK deconstruction. Mapping reaction coordinates in energy and space across a range of potential conformations reveals the underpinnings of this behavior, which involves preorganization of the transition state for diketoenamine bond acidolysis when a tertiary amine is also nearby.

Construction and evaluation of environment-friendly POSS multi-crosslinked mulch film based on bone gelatin

The non-degradable traditional polyethylene (PE) mulch film has caused great harm to both the ecological environment as well as human health. Therefore, the biodegradable bone gelatin (B-Gel) was innovatively selected to build the mulch film. To further enhance the toughness of the B-Gel mulch films, a POSS star-shaped polymer/bone gelatin (P(POSS-AGE-HEA)/B-Gel) composite was prepared by introducing POSS star-shaped polymer into B-Gel via in situ polymerization using polyhedral oligomeric silsesquioxane (POSS), allyl glycidyl ether (AGE) and hydroxyethyl acrylate (HEA) as raw material, and then was cast to obtain the P(POSS-AGE-HEA)/B-Gel mulch film. The epoxy group of POSS star-shaped polymer with the -COOH and -NH2 of B-Gel forms a covalent bond, and the hydroxyl group with the active groups of B-Gel forms hydrogen bonds. Meanwhile, the multiple side chains of POSS star-shaped polymer are intertwined with B-Gel. These covalent and hydrogen bonds as sacrificial bonds for effective energy dissipation giving the bone gelatin-based film excellent mechanical properties with a tensile strength of 7.56 ± 0.64 MPa and elongation at break of 197.49 ± 17.63 %. Additionally, it also demonstrated sound water vapor barrier, surface hydrophobicity, light transmittance and the effect of facilitating the growth and germination ratio (93.75 %) of wheat.

Perspectives on recent advancements in energy harvesting, sensing and bio-medical applications of piezoelectric gels

The development of next-generation bioelectronics, as well as the powering of consumer and medical devices, require power sources that are soft, flexible, extensible, and even biocompatible. Traditional energy storage devices (typically, batteries and supercapacitors) are rigid, unrecyclable, offer short-lifetime, contain hazardous chemicals and possess poor biocompatibility, hindering their utilization in wearable electronics. Therefore, there is a genuine unmet need for a new generation of innovative energy-harvesting materials that are soft, flexible, bio-compatible, and bio-degradable. Piezoelectric gels or PiezoGels are a smart crystalline form of gels with polar ordered structures that belongs to the broader family of piezoelectric material, which generate electricity in response to mechanical stress or deformation. Given that PiezoGels are structurally similar to hydrogels, they offer several advantages including intrinsic chirality, crystallinity, degree of ordered structures, mechanical flexibility, biocompatibility, and biodegradability, emphasizing their potential applications ranging from power generation to bio-medical applications. Herein, we describe recent examples of new functional PiezoGel materials employed for energy harvesting, sensing, and wound dressing applications. First, this review focuses on the principles of piezoelectric generators (PEGs) and the advantages of using hydrogels as PiezoGels in energy and biomedical applications. Next, we provide a detailed discussion on the preparation, functionalization, and fabrication of PiezoGel-PEGs (P-PEGs) for the applications of energy harvesting, sensing and wound healing/dressing. Finally, this review concludes with a discussion of the current challenges and future directions of P-PEGs.

Adaptive Ion-Gel: Stimuli-Responsive, and Self-Healing Ion Gels

Ion gels are an emerging class of polymer gels in which a three-dimensional polymer network swells with an ionic liquid. Ion gels have drawn considerable attention in various fields such as energy and biotechnology owing to their excellent properties including nonvolatility, nonflammability, high ionic conductivity, and high thermal and electrochemical stability. Since the first report on ion gels (published ∼30 years ago), diverse functional ion gels exhibiting impressive physicochemical properties have been reported. In this review, recent developments in functional ion gels that can modulate their physical properties in response to environmental conditions are outlined. Stimuli-responsive ion gels that can adaptively undergo phase transitions in response to thermal and light stimuli are initially discussed, followed by an evaluation of diverse self-healing ion gels that can spontaneously mend mechanical damage through judiciously designed ion-gel networks.

Dynamic Metal-Ligand Coordination-Assisted Ionogels for Deformable Alternating Current Electroluminescent Devices

Overcoming the trade-off between the mechanical robustness and conductivity of ionic conductors is a crucial challenge for deformable ionotronics. In this work, we propose a simple but effective gelation strategy for selectively improving the mechanical robustness of ionogels without compromising their ionic conductivity. To achieve this, we introduce dynamic metal-ligand coordination chemistry into the ionic liquid (IL)-insoluble domains of a physically crosslinked ionogel network structure. As a result, the overall mechanical property is remarkably improved with the aid of additional chemical crosslinking. This strategy does not require any additional heat/light (UV) treatments to induce chemical crosslinking. The homogeneous physically/chemically dual crosslinked ionogel films can be readily obtained by simply casting a solution containing Ni²⁺ sources, copolymer gelators, and ILs. The effects of adjusting fundamental parameters on the ionogel properties are investigated systematically. The optimized mechanically robust and highly conductive ionogels are successfully employed as deformable ionic electrodes in alternating-current electroluminescent displays, indicating their high practicality. Overall, these results validate that exploiting metal-ligand coordination dynamic bonding is an extremely straightforward strategy for selectively improving the mechanical characteristics of conductive ionogels, which are promising platforms for deformable ionotronics.

Extremely Tough, Stretchable Gel Electrolytes with Strong Interpolymer Hydrogen Bonding Prepared Using Concentrated Electrolytes to Stabilize Lithium-Metal Anodes

Extremely tough and stretchable gel electrolytes, which can be prepared by leveraging the strong interpolymer hydrogen bonding in concentrated lithium (Li)-salt electrolytes, are reported. These electrolytes can be realized by optimizing the competitive hydrogen-bonding interactions between polymer chains, solvent molecules, Li cations, and counteranions. Free polar solvent molecules, which typically impede interpolymer hydrogen bonding, are scarce in concentrated electrolytes; this feature can be exploited to prepare hydrogen-bonded gel electrolytes with unprecedented toughness. In contrast, free solvent molecules are abundant in electrolytes with typical concentrations, yielding considerably weaker gel electrolytes. The tough gel electrolyte can be used an artificial protective layer for Li-metal anodes, as it considerably enhances the cycling stability of a Li symmetric cell through uniform Li deposition/dissolution. Additionally, employing the gel electrolyte as the protecting layer significantly improves the cycling performance of the Li||LiNi_0.6 Co_0.2 Mn_0.2 O₂ full cell.

Toughening of poly(ionic liquid)-based ion gels with cellulose nanofibers as a sacrificial network

Ion gels have the potential to be used in a broad range of applications, such as in carbon dioxide separation membranes and soft electronics. However, their low mechanical strength limits their practical applications. In this study, we developed double-network (DN) ion gels composed of TEMPO-oxidized cellulose nanofibers with hydrophobic groups (TOCNF) and cross-linked poly[1-ethyl-3-vinylimidazolium bis(trifluoromethanesulfonyl)imide] (PC_2im-TFSI) networks. The mechanical strength of the gel increased as the amount of TOCNF in the gels increased up to 6 wt%. Moreover, the fracture energy of the DN ion gels with 6 wt% TOCNF was found to be 19 times higher than that of the PC_2im-TFSI single network (SN) ion gels. Cyclic stress-strain measurements of the DN gels showed that the loading energy on the gels dissipates owing to the destruction of the physically cross-linked TOCNF network in the gels. The DN ion gels also exhibited a high decomposition temperature of approximately 400 °C because of the thermal stability of all components. Additionally, the fracture energy of the TOCNF/poly(ionic liquid) (PIL) DN ion gel was two times higher than that of the silica nanoparticles/PIL DN ion gel developed in our previous study [Watanabe et al., Soft Matter, 2020, 16, 1572-1581]. This suggests that fiber-shaped nanomaterials are more effective than spherical nanomaterials in enhancing the mechanical properties of ion gels. These results show that TOCNF can be used to toughen PIL-based ion gels and hence broaden their applications.

Controlling mechanical properties of ultrahigh molecular weight ion gels by chemical structure of ionic liquids and monomers

A new class of ion gels, termed ultrahigh molecular weight (UHMW) gels, formed by physical entanglement of ultrahigh molecular weight polymers in ionic liquids, are synthesised using facile one step radical polymerisation with significantly low initiator conditions, and exhibit superior mechanical characteristics such as stretchability, recyclability, and room temperature self-healing ability. In this study, UHMW gels are synthesised using various combinations of monomer and IL structures, and the effect of their chemical structures on the physicochemical properties of UHMW gels are thoroughly investigated. UHMW polymers are prepared in situ for all combinations of ILs and monomers used in this study, indicating the wide applicability of this fabrication strategy. The structure-property relationships between chemical structures and mechanical properties of UHMW gels are investigated in detail. Furthermore, the differences in self-healing efficiency of UHMW gels depending on the chemical structure is discussed in terms of individual polymer conformation and polymer-polymer interaction based on molecular dynamics simulations.