Direct air capture (DAC) and sequestration of CO2: Dramatic effect of coordinated Cu(II) onto a chelating weak base ion exchanger

Recent progress of heterogeneous catalysts for transfer hydrogenation under the background of carbon neutrality

Under the background of carbon neutrality, the direct conversion of greenhouse CO2 to high value added fuels and chemicals is becoming an important and promising technology. Among them, the generation of liquid C1 products (formic acid and methanol) has made great progress; nevertheless, it encounters the problem of how to use it efficiently to solve the overcapacity issue. In this review, we suggest that the catalytic transfer hydrogenation using formic acid and methanol as the hydrogen sources is a critical and potential route for the substitution for the fossil fuel-derived H2 to generate essential bulk and fine chemicals. We mainly focus on summarizing the recent progress of heterogeneous catalysts in such reactions, including thermal- and photo-catalytic processes. Finally, we also propose some challenges and opportunities for this development.

Continuous Synthesis of Carbamates from CO2 and Amines

We present a novel approach for the continuous preparation of carbamates. The simple yet fast synthetic route relies on directly utilizing carbon dioxide and, in contrast with the literature-known methods, only employs 1,8-diazabicyclo[5.4.0]undec-7-ene as an additive. The applicable amines' diversity offers considerable flexibility to the synthetic protocol. Additionally, the continuous method's applicability significantly decreases the reaction time typically required for CO2-based carbamate synthesis and allows for straightforward and precise gas introduction. The mild reaction conditions and omission of the need for column chromatography render the process less time-demanding and environmentally more benign, providing the desired compounds in yields of 45 to 92%. Moreover, the modified procedure can potentially be applied in the selective synthesis of oxazolidinones from aziridines.

Measurement of Physicochemical Properties and CO2, N2, Ar, O2, and H2O Unary Adsorption Isotherms of Purolite A110 and Lewatit VP OC 1065 for Application in Direct Air Capture

Direct air capture (DAC) using solid adsorbents has gained significant attention as a carbon dioxide removal (CDR) technology to help limit global temperature rise to below 2 °C. One large area of focus is the development of new adsorbent materials for DAC. However, the necessary data needed to employ these materials in process models for adsorbent screening are rarely available. Here, we showcase Purolite A110, a commercially available amine-functionalized polymeric resin, as a new candidate adsorbent for DAC and compare its properties to a current benchmark, Lewatit VP OC 1065. For both materials, we report their chemical features and composition, skeletal, particle, and bed density, total pore volume, particle porosity, BET area, thermal stability, and specific heat capacity. We determine their equilibrium sorption properties by measuring the volumetric CO2 isotherms at 288, 298, 308, 333, 343, 353, and 393 K, N2 and H2O isotherms at 288, 298, and 308 K, and Ar and O2 isotherms at 298 K. For CO2, N2, and H2O, we also present the corresponding isotherm model fitting parameters and heats of adsorption. These data can help facilitate process modeling and optimization studies to properly assess these adsorbents at scale.

Amine-Functionalized Amyloid Aerogels for CO2 Capture

Climate change caused by excessive CO2 emissions constitutes an increasingly dire threat to human life. Reducing CO2 emissions alone may not be sufficient to address this issue, so that the development of emerging adsorbents for the direct capture of CO2 from the air becomes essential. Here, we apply amyloid fibrils derived from different food proteins as the solid adsorbent support and develop aminosilane-modified amyloid fibril-templated aerogels for CO2 capture applications. The results indicate that the CO2 sorption properties of the aerogels depend on the mixing ratio of aminosilane featuring different amine groups and the type of amyloid fibril used. Notably, amine-functionalized β-lactoglobulin (BLG) fibril-templated aerogels show the highest CO2 adsorption capacity of 51.52 mg (1.17 mmol) CO2 /g at 1 bar CO2 and 25.5 mg (0.58 mmol) CO2 /g at 400 ppm; similarly, the CO2 adsorption capacity of chitosan-BLG fibril hybrid aerogels is superior to that of pure chitosan. This study provides a proof-of-concept design for an amyloid fibril-templated hybrid material facilitating applications of protein-based adsorbents for CO2 capture, including direct air capture.

Splitting CO2 in Intense Pulsed Plasma Jets

The splitting of CO₂ was studied in a pulsed plasma discharge produced in a coaxial gun at voltages between ~1 and 2 kV and peak discharge currents of 7 to 14 kA. The plasma was ejected from the gun at a speed of a few km/s and had electron temperatures between 11 and 14 eV with peak electron densities ~2.4 × 10²¹ particles m^-3. Spectroscopic measurements were carried out in the plasma plume produced at pressures between 1 and 5 Torr, and evidence of CO₂ dissociation into oxygen and CO was found. An increased discharge current led to the observation of more intense spectra lines and the presence of new oxygen lines, which implies more dissociation channels. Several dissociation mechanisms are discussed, the main candidate being the splitting of the molecule by direct electron impact. Estimates of dissociation rates are made based on measured plasma parameters and interaction cross-sections available in the literature. A possible application of this technique is in future Mars missions where the coaxial plasma gun running in the atmosphere could be able to produce oxygen at a rate of the order of over 100 g per hour in a highly repetitive regime.