Chemistry of the fullerenes: the manifestation of strain in a class of continuous aromatic molecules

Extended Quinolizinium-Fused Corannulene Derivatives: Synthesis and Properties

Reported here is the design and synthesis of a novel class of extended quinolizinium-fused corannulene derivatives with curved geometry. These intriguing molecules were synthesized through a rationally designed synthetic strategy, utilizing double Skraup-Doebner-Von Miller quinoline synthesis and a rhodium-catalyzed C-H activation/annulation (CHAA) as the key steps. Single-crystal X-ray analysis revealed a bowl depth of 1.28-1.50 Å and a unique "windmill-like" shape packing of 12a(2PF6-) due to the curvature and incorporation of two aminium ions. All of the newly reported curved salts exhibit green to orange fluorescence with enhanced quantum yields (Φf = 9-13%) and improved dispersibility compared to the pristine corannulene (Φf = 1%). The reduced optical energy gap and lower energy frontier orbital found by doping extended corannulene systems with nitrogen cations was investigated by UV-vis, fluorescence, and theoretical calculations. Electrochemical measurements reveal a greater electron-accepting behavior compared with that of their pyridine analogues. The successful synthesis, isolation, and evaluation of these curved salts provide a fresh perspective and opportunity for the design of cationic nitrogen-doped curved aromatic hydrocarbon-based materials.

Strain-induced carbon-carbon bond cleavage of bowl-shaped sumanenone

This study details a highly effective ring-opening reaction that involves acid-mediated carbon-carbon bond cleavage of the buckybowl, sumanenone. The reaction of the bowl-shaped sumanenone with AcOH and TfOH results in the formation of a planar carboxylic acid. The examination of reactivity in comparison to planar analogues, along with theoretical calculations, suggests that the release of curved strain is a crucial factor for the success of this reaction.

Synthesis of Cs-symmetrical C60 tetra-adducts via reactions of C60Cl6 with CH-acids and enol silyl ester

Here we report the synthesis of novel fullerene derivatives with attached aliphatic residues based on the previously unknown reactions of chlorofullerene C60Cl6 with CH-acids and silyl enol ether.

Two-Legged Molecular Walker and Curvature: Mechanochemical Ring Migration on Graphene

Attaining controllable molecular motion at the nanoscale can be beneficial for multiple reasons, spanning from optoelectronics to catalysis. Here we study the movement of a two-legged molecular walker by modeling the migration of a phenyl aziridine ring on curved graphene. We find that directional ring migration can be attained on graphene in the cases of both 1D (wrinkled/rippled) and 2D (bubble-shaped) curvature. Using a descriptor approach based on graphene's frontier orbital orientation, we can understand the changes in binding energy of the ring as it translates across different sites with variable curvature and the kinetic barriers associated with ring migration. Additionally, we show that the extent of covalent bonding between graphene and the molecule at different sites directly controls the binding energy gradient, propelling molecular migration. Importantly, one can envision such walkers as carriers of charge and disruptors of local bonding. This study enables a new way to tune the electronic structure of two-dimensional materials for a range of applications.

Gas-phase C60Hn+q (n = 0-4, q = 0,1) fullerenes and fulleranes: spectroscopic simulations shed light on cosmic molecular structures

The discovery of C60, C60+, and C70 in the interstellar medium has ignited a profound interest in the astrochemistry of fullerene and related systems. In particular, the presence of diffuse interstellar bands and their association with C60+ has led to the hypothesis that hydrogenated derivatives, known as fulleranes, may also exist in the interstellar medium and contribute to these bands. In this study, we systematically investigated the structural and spectroscopic properties of C60Hn+q (n = 0-4, q = 0,1) using an automated global minimum search and density functional theory calculations. Our results revealed novel global minimum structures for C60H2 and C60H4, distinct from previous reports. Notably, all hydrogenated fullerenes exhibited lower ionization potentials and higher proton affinities compared to C60. From an astrochemical perspective, our results exposed the challenges in establishing definitive spectroscopic criteria for detecting fulleranes using mid-infrared and UV-Vis spectroscopies. However, we successfully identified distinct electronic transitions in the near-infrared range that serve as distinctive signatures of cationic fulleranes. We strongly advocate for further high-resolution experimental studies to fully explore the potential of these transitions for the interstellar detection of fulleranes.

U@Cs(4)-C82: A Different Cage Isomer with Reactivity Controlled by U-Sumanene Interaction

Actinide endohedral metallofullerenes (EMFs) are a fullerene family that possess unique actinide-carbon cage host-guest molecular and electronic structures. In this work, a novel actinide EMF, U@Cs(4)-C82, was successfully synthesized and characterized, and its chemical reactivity was investigated. Crystallographic analysis shows that U@Cs(4)-C82, a new isomer of U@C82, has a Cs(4)-C82 cage, which has never been discovered in the form of empty or endohedral fullerenes. Its unique chemical reactivities were further revealed through the Bingel-Hirsch reaction and carbene addition reaction studies. The Bingel-Hirsch reaction of U@Cs(4)-C82 shows exceptionally high selectivity and product yield, yielding only one major addition adduct. Moreover, the addition sites for both reactions are unexpectedly located on adjacent carbon atoms far away from the actinide metal, despite the nucleophilic (Bingel-Hirsch) and electrophilic (carbene addition) nature of either reactant. Density functional theory (DFT) calculations suggest that this chemical behavior, unprecedented for EMFs, is directed by the unusually strong interaction between U and the sumanene motif of the carbon cage in U@Cs(4)-C82, which makes the energy increase when it is disrupted. This work reveals remarkable chemical properties of actinide EMFs originating from their unique electronic structures and highlights the key role of actinide-cage interactions in the determination of their chemical behaviors.

Substrate Strain Engineering of Single-Atomic Sn-N4 Sites Embedded in Various Carbon Matrixes for Bifunctional Oxygen Electrocatalysis

It is still a great challenge to design and synthesize high-efficiency and low-cost single-atom catalysts (SACs) as promising bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). Herein, theoretical insights into Sn-N₄ embedded carbon nanotubes, graphene quantum dots, and graphene nanosheets (denoted as Sn-N₄-CNTs, Sn-N₄-GQDs, and Sn-N₄-Gra, respectively) for the ORR/OER are systematically provided. These results show that the protruding Sn atom creates a Sn-N₄ pyramid and induces varied strain transfer between Sn-N₄ and different carbon substrates prior to adsorption of O intermediates, resulting in the opposite response of the adsorption strengths of O intermediates to the substrate curvature of Sn-N₄-CNTs and Sn-N₄-GQDs. The torsional strain induced by OH* and OOH* on the Sn atom of Sn-N₄-CNTs breaks the scaling relations between the adsorption strengths of O intermediates. Consequently, Sn-N₄-CNTs with suitable curvature achieve outstanding ORR performance with very low overpotentials (0.28 V). Furthermore, the increase of curvature boosts the OER activity of Sn-N₄-CNTs. For Sn-N₄-GQDs, high curvature contributes to promoted OER activity but reduced ORR activity. The electronic interactions reveal the electron transfer from the s/p-bands of Sn to the half-filled β states of the frontier orbitals of O intermediates.

Acceleration Effect of Bowl-Shaped Structure in Aerobic Oxidation Reaction: Synthesis of Homosumanene ortho-Quinone and Azaacene-Fused Homosumanenes

An oxidation reaction of hydroxyhomosumanene on silica gel providing homosumanene ortho-quinone and its synthetic application for azaacene-fused homosumanenes is described. Hydroxyhomosumanene is photochemically oxidized by air, when it is coated on silica gel; this aerobic oxidation proceeds faster than that of planar analogues. The difference of such reactivity was attributed to the unusual keto-enol tautomerization due to structural difference between planar and curved π-system. The homosumanene ortho-quinone was used in the synthesis of several azaacene-fused homosumanenes, azaacenohomosumanenes. X-ray diffraction analysis of the single crystals revealed their columnar stacking structures due to the interactions between each bowl. Azaacenohomosumanenes exhibited high electron affinity due to the combination of buckybowl and electron-deficient azaacene moieties.

Feasibility of Carbon Nanoparticle Coatings as Protective Barriers for Copper─Wetting Assessment

Copper is extensively used in a wide range of industrial and daily-life applications, varying from heat exchangers to electrical wiring. Although it is protected from oxidation by its native oxide layer, when subjected to harsh environmental conditions─such as in coastal regions─this metal can rapidly degrade. Therefore, in this study, we analyze the potential use of carbon nanoparticle coatings as protective barriers due to their intrinsic hydrophobic wetting behavior. The nanocarbon coatings were produced via electrophoretic deposition on Cu platelets and characterized via scanning electron microscopy, confocal laser scanning microscopy, and sessile drop test; the latter being the primary focus since it provides insights into the wetting behavior of the produced coatings. Among the measured coatings, graphite flakes, graphene oxide, and carbon nanotube (CNT) coatings showed superhydrophobic behavior. Based on their wetting behavior, and specifically for electrical applications, CNT coatings showed the most promising results since these coatings do not significantly impact the substrate's electrical conductivity. Although CNT agglomerates do not affect the wetting behavior of the attained coatings, the coating's thickness plays an important role. Therefore, to completely coat the substrate, the CNT coating should be sufficiently thick─above approximately 1 μm.

Tailoring of Active Sites from Single to Dual Atom Sites for Highly Efficient Electrocatalysis

Single atom catalysts (SACs) have been attracting extensive attention in electrocatalysis because of their unusual structure and extreme atom utilization, but the low metal loading and unified single site induced scaling relations may limit their activity and practical application. Tailoring of active sites at the atomic level is a sensible approach to break the existing limits in SACs. In this review, SACs were first discussed regarding carbon or non-carbon supports. Then, five tailoring strategies were elaborated toward improving the electrocatalytic activity of SACs, namely strain engineering, spin-state tuning engineering, axial functionalization engineering, ligand engineering, and porosity engineering, so as to optimize the electronic state of active sites, tune d orbitals of transition metals, adjust adsorption strength of intermediates, enhance electron transfer, and elevate mass transport efficiency. Afterward, from the angle of inducing electron redistribution and optimizing the adsorption nature of active centers, the synergistic effect from adjacent atoms and recent advances in tailoring strategies on active sites with binuclear configuration which include simple, homonuclear, and heteronuclear dual atom catalysts (DACs) were summarized. Finally, a summary and some perspectives for achieving efficient and sustainable electrocatalysis were presented based on tailoring strategies, design of active sites, and in situ characterization.

Defective hBN-Supported Fe2N Single Cluster Catalyst for Active and Selective Electro-Reduction of Multiple CO to Propane: Theoretical Elucidation of Metal-Nonmetal Synergic Effects

The present work introduces the multiple CO reduction toward C₃ products promoted by a newly designed single cluster catalyst consisting of defective hBN and embedded dimerized Fe, by means of density functional theory calculations. We find the strong metal-support interactions give rise to the local strain and electron accumulation of the N coordinated with two metals and resultantly form a Fe₂N active center. The metal-nonmetal synergic effect facilitates the coadsorption and C-C coupling of triple CO molecules and finally generates propane in a highly active and selective way.

Understanding chemistry: from "heuristic (soft) explanations and reasoning by analogy" to "quantum chemistry"

"Soft theories," i.e., "heuristic models based on reasoning by analogy" largely drove chemistry understanding for 150 years or more. But soft theories have their limitations and with the expansion of chemistry in the mid-20th century, more and more inexplicable (by soft theory) experimental results were being obtained. In the past 50 years, quantum chemistry, most often in the guise of applied theoretical chemistry including computational chemistry, has provided (a) the underlying "hard evidence" for many soft theories and (b) the explanations for chemical phenomena that were unavailable by soft theories. In this publication, we define "hard theories" as "theories derived from quantum chemistry." Both soft and hard theories can be qualitative and quantitative, and the "Houk quadrant" is proposed as a helpful categorization tool. Furthermore, the language of soft theories is often used appropriately to describe quantum chemical results. A valid and useful way of doing science is the appropriate use and application of both soft and hard theories along with the best nomenclature available for successful communication of results and ideas.

Mechanochemical Molecular Migration on Graphene

In this study, we propose that the curvature of graphene can be exploited to perform directional molecular motion and provide atomistic insights into the curvature-dependent molecular migration through density functional theory calculations. We first reveal the origin of the different migration trends observed experimentally for aromatic molecules with electron-donating and -withdrawing groups on p-doped functionalized graphene. Next, we show that the kinetic barrier for migration depends on the amount and nature of the curvature, that is, positive versus negative curvature. We find that the molecular migration on a wrinkled/rippled graphene sheet preferentially happens from the valley (positive curvature) to the mountain (negative curvature) regions. To understand the origin of such curvature-dependent molecular motion and migrational kinetic barrier trends, we develop a descriptor based on the frontier orbital orientation of graphene. Finally, based on these findings, we predict that time- and space-varying curvature can drive directional molecular motion on graphene and thus further propose that efforts should focus on exploring other two-dimensional materials as active platforms for performing controlled molecular motion.

Bowl-Shaped Symmetric and Non-symmetric Bis-functionalized Indacenopicenes

Regioselective arrangement of two groups of orthogonal reactivity in bowl-shaped as-indaceno[3,2,1,8,7,6-pqrstuv]picene (Idpc) was key for the synthesis of hetero-bis-functionalized Idpc derivatives. Halogen and methyl groups were positioned at specific positions in the rim area of Idpc at an early stage during the synthesis by functionalization of suitable precursors. Regioselective functionalization of the bowl's rim was then finally achieved either via consecutive Cu(I)-catalyzed azide-alkyne coupling (CuAAC) and C-C cross-coupling reactions or by C-C cross-coupling alone, giving access to either symmetric or non-symmetric bis-functionalized Idpc derivatives. The self-aggregation behavior of 9c in solution was investigated by recording a series of concentration-dependent NMR spectra. The aggregation constant of 9c was determined by a nonlinear least-squares treatment of the ¹H NMR shift data to be 2.9 ± 0.2 M^-1, and the formation of dimers was found to be the prevailing process.

Defective porous carbon microrods derived from fullerenes (C70) as high-performance electrocatalysts for the oxygen reduction reaction

Disrupting the integrity of the sp²-carbon skeleton offers an effective strategy to create active sites for the oxygen reduction reaction (ORR). In this work, fullerene (C₇₀) molecules, composed of 12 pentagons and 25 hexagons all bonded by sp²-C atoms, are assembled into microrods (C70MRs) at the liquid-liquid interface and then broken down by calcination to generate metal-free fullerene-derived ORR electrocatalysts. The effect of the pyrolysis temperature on C70MRs is investigated, and it is found that pyrolysis at 900 °C effectively unfolds the C₇₀ cages and converts them into a highly porous, defect-rich carbon material (C70MRs-900) with the rod-shaped morphology well-retained. These structural features endow C70MRs-900 with outstanding ORR activity and stability together with remarkable methanol tolerance, better than C70MRs annealed at either lower (800 °C) or higher (1000 °C) temperatures. Furthermore, nitrogen atoms are successfully incorporated into the defective carbon skeleton by annealing C70MRs at 900 °C in the presence of NH₄Cl. The resultant N-doped C70MRs-900 exhibits remarkable ORR performance with a half-wave potential of 0.836 V, comparable to that of the commercial 20% Pt/C catalyst. This work presents a simple and effective route of utilizing fullerene molecules as starting materials to develop high-performance metal-free, carbon-based electrocatalysts toward the ORR and even beyond.

Phenine design for nanocarbon molecules

With the name "phenine" given to 1,3,5-trisubstituted benzene for a fundamental trigonal planar unit to weave nanometer-sized networks, a series of curved nanocarbon molecules have been designed and synthesized. Since the 6π-phenine units were amenable to modern biaryl coupling reactions mediated by transition metals, concise syntheses of >400π-nanocarbon molecules were readily achieved. In addition, the phenine design allowed for installing of heteroatoms and/or transition metals doped at specific positions of the large π-systems of the nanocarbon molecules. Fundamental tools were also developed to specify and describe the locations of defects/dopants, quantify pyramidalizations of trigonal panels and estimate molecular Gauss curvatures of the discrete surface. Unique features of phenine nanocarbons, such as stereoisomerism, entropy-driven molecular assembly and effects of dopants on electronic/magnetic characteristics, were revealed during the first half-decade of investigations.

Theoretical Prediction of Graphene-like 2D Uranyl Material with p-Orbital Antiferromagnetism

Versatile graphene-like two-dimensional materials with s-, p- and d-block elements have aroused significant interests because of their extensive applications while there is a lack of f-block one. Herein we report...

Effects of orbital angles on the modeling of conjugated systems with curvature

Models with angle corrections give well predictions of both neutral and charged fullerenes. The integrals of nonparallel orbitals explain why angle features of designed and deep-learning models are necessary to describe conjugated systems.

Substrate strain tunes operando geometric distortion and oxygen reduction activity of CuN2C2 single-atom sites

Single-atom catalysts are becoming increasingly significant to numerous energy conversion reactions. However, their rational design and construction remain quite challenging due to the poorly understood structure–function relationship. Here we demonstrate the dynamic behavior of CuN₂C₂ site during operando oxygen reduction reaction, revealing a substrate-strain tuned geometry distortion of active sites and its correlation with the activity. Our best CuN₂C₂ site, on carbon nanotube with 8 nm diameter, delivers a sixfold activity promotion relative to graphene. Density functional theory and X-ray absorption spectroscopy reveal that reasonable substrate strain allows the optimized distortion, where Cu bonds strongly with the oxygen species while maintaining intimate coordination with C/N atoms. The optimized distortion facilitates the electron transfer from Cu to the adsorbed O, greatly boosting the oxygen reduction activity. This work uncovers the structure–function relationship of single-atom catalysts in terms of carbon substrate, and provides guidance to their future design and activity promotion.

The rational design of single-atom catalysts is challenging. This work reveals a substrate-strain tuned geometry distortion of CuN₂C₂ single-atom site, which greatly boosts oxygen reduction activity by facilitating electron transfer to adsorbed O.

Synthesis and Electrochemistry of Novel Dumbbell-Shaped Bis-pyrazolino[60]fullerene Derivatives Formed Using Microwave Radiation

The design of covalently linked [60]fullerene dimers has gained increased attention, as the linked electron donors or acceptors are in close proximity to the surface of the C60, providing a valuable approach to novel molecular electronic devices. Herein, new compounds involving C60 dumbbells covalently connected by the π-conjugated system from azobenzene and diaryl ether linkers were synthesized following the bifunctional cycloaddition reactions to C60 using microwave radiation. The structural identity of the fullerene dimers has been determined using spectroscopic techniques including Fourier transform infrared (FT-IR), matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF), and NMR spectroscopy, and the photophysical and the electrochemical properties for the new dumbbells have been examined using UV-vis spectroscopy, fluorescence spectroscopy, cyclic voltammetry, and square wave voltammetry. Both new dimers show electronic interaction with the fullerene cage and higher electron affinity than the pristine C60.

Ruthenium-Nanoparticle-Loaded Hollow Carbon Spheres as Nanoreactors for Hydrogenation of Levulinic Acid: Explicitly Recognizing the Void-Confinement Effect

As a typical class of man-made nanoreactors, metal-loaded hollow carbon nanostructures (MHC nanoreactors) exhibit competitive potentials in the heterogeneous catalysis due to their tailorable microenvironment effects, in which the void-confinement effect is one of the most fundamental functions in boosting the catalytic performance. Herein this paper, Ru-loaded hollow carbon spheres are employed as nanoreactors with a crucial biomass hydrogenation process, levulinic acid (LA) hydrogenation into γ-valerolactone, as the probe reaction to further recognize the forming mechanism of this pivotal effect. We demonstrated that the void-confinement effect of the selected MHC nanoreactors is essentially driven by an integrating action of electronic metal-support interaction, reactant enrichment and diffusion, which are mainly ascribed to peculiar properties of hollow nanoreactors both in electronic and structural aspects, respectively. This work offers a distinct case for interpreting the catalytic behaviour of MHC nanoreactors, which could potentially promise broader insights into the microenvironment engineering strategies of hollow nanostructures.

Click Chemistry with Cyclopentadiene

Cyclopentadiene is one of the most reactive dienes in normal electron-demand Diels-Alder reactions. The high reactivities and yields of cyclopentadiene cycloadditions make them ideal as click reactions. In this review, we discuss the history of the cyclopentadiene cycloaddition as well as applications of cyclopentadiene click reactions. Our emphasis is on experimental and theoretical studies on the reactivity and stability of cyclopentadiene and cyclopentadiene derivatives.

Characterization of titanium influences on structure and thermodynamic stability of novel C20-nTin nanofullerenes (n=1-5): a density functional perspective

In this survey, effects of titanium heteroatom(s) on structural parameters and thermodynamic stability of C₂₀ fullerene and its C_20-nTi_n derivatives (n = 1-5) are compared and contrasted, at DFT levels of theory. The results show that in going from C₁₉Ti₁ to C₁₅Ti₅, binding energy increases while absolute value heat of atomization decreases. According to vibrational frequency analysis, excepting C₁₆Ti_4-1, the other optimized structures give no imaginary frequency as true minima. The calculated binding energy of 887.12 kcal mol^-1/atom displays C₁₅Ti₅ as the most thermodynamically stable heterofullerene. It has C_s symmetry and contains five titanium atoms alternatively in equatorial position. The substitutional doping of C₂₀ fullerene leads to high Mülliken charge distribution upon the surfaces of the resulted heterofullerenes especially C₁₉Ti₁ as suitable hydrogen storage. The contour plots indicate the most negative electrostatic potential by red color for C atoms, whereas the most positive electrostatic potential by yellow color for Ti heteroatoms. The contour plots and multiwfn analysis exhibit charge transfer from titanium heteroatoms to the neighboring carbon atoms. Furthermore, the resulted electron density maps from multiwfn qualitatively confirm the contour plot's findings. The hydrogen adsorption is an endothermic process for C₂₀ fullerene and exothermic process for C_20-nTi_n heterofullerenes. Major criteria examined for thermodynamic stability; from C₁₉Ti₁ to C₁₅Ti₅, binding energy and hydrogen adsorption increase while heat of atomization decreases.

Anomalous Flexural Elasticities of Graphene Membranes Unveiled by Manipulating Topology

Mechanical behavior of atomically thin membranes is governed by bending rigidity and the Gaussian modulus. However, owing to methodological drawbacks, these two parameters have not been investigated sufficiently. We employed atomic force microscopy to demonstrate that the bending rigidity can be extracted from a quadratic relationship of adhesion energy with monolayer curvatures of rolled and unrolled graphene. The tip-induced topological defects revealed the Gaussian modulus; to the best of our knowledge, this is the first study on these parameters. Our study may hold great significance because existing investigations have been performed only on flat graphene. The configurational (strain) energy was evaluated via changes in the surface geometry, with subatomic resolution, by three-dimensional analyses of attractive interatomic forces. The mechanical parameters, evaluated at the hollow sites of the honeycomb lattice, were consistent with the isotropic elastic attributes. The remarkably large negative Gaussian modulus, observed when a single carbon atom was located at the center of the tip-induced bump, revealed attractive interactions between the topological defects and geometric potentials of the Gaussian curvature. Our approach will aid in developing two-dimensional materials and understanding cell biology.

Thermodynamic stability, structural and electronic properties for the C20-nAln heterofullerenes (n = 1-5): a DFT study

DFT calculations are utilized to compare and contrast the substituted aluminum-heterofullerenes, C_20-nAl_n (with n = 1-5) from thermodynamically view point, at density functional theory (DFT). Vibrational frequency analysis confirms that apart from C₁₅Al₅, all studied species are true minima. Considering the optimized geometries shows that all heterofullerenes are isolated-pentagon cage and none collapse to open deformed as segregated structure. The highest binding energy (5.56 eV/atom) and absolute heat of atomization (3323.68 kcal mol^-1) reveals open-shell C₁₉Al₁ as the most stable thermodynamic heterofullerene. The most NICS (0) (isotropic and anisotropic parameters, -49.58 and - 46.47 ppm, respectively) introduces closed-shell C₁₈Al_2-2 as the most aromatic structure. Also, closed-shell C₁₆Al_4-1 heterofullerene emerges with the most polarizability (307.71 a.u.) and hence activity to interact with the surrounding polar species. The lowest and the highest charge transfer on the surfaces of C₂₀ and C₁₆Al_4-2 without weak Al-Al bond, as the worst and the best candidate, respectively, provokes further investigation on impossible and possible application for hydrogen storage, respectively. We wish that the present survey will stimulate new experiments.

Substructural Approach for Assessing the Stability of Higher Fullerenes

This review describes the most significant published results devoted to the study of the nature of the higher fullerenes stability, revealing of correlations between the structural features of higher fullerene molecules and the possibility of their producing. A formalization of the substructure approach to assessing the stability of higher fullerenes is proposed, which is based on a detailed analysis of the main structural features of fullerene molecules. The developed substructure approach, together with the stability of the substructures constituting the fullerene molecule, helps to understand deeper the features of the electronic structure of fullerenes.

Carbon-based catalysts for Fischer-Tropsch synthesis

Fischer-Tropsch synthesis (FTS) is an essential approach to convert coal, biomass, and shale gas into fuels and chemicals, such as lower olefins, gasoline, diesel, and so on. In recent years, there has been increasing motivation to deploy FTS at commercial scales which has been boosting the discovery of high performance catalysts. In particular, the importance of support in modulating the activity of metals has been recognized and carbonaceous materials have attracted attention as supports for FTS. In this review, we summarised the substantial progress in the preparation of carbon-based catalysts for FTS by applying activated carbon (AC), carbon nanotubes (CNTs), carbon nanofibers (CNFs), carbon spheres (CSs), and metal-organic frameworks (MOFs) derived carbonaceous materials as supports. A general assessment of carbon-based catalysts for FTS, concerning the support and metal properties, activity and products selectivity, and their interactions is systematically discussed. Finally, current challenges and future trends in the development of carbon-based catalysts for commercial utilization in FTS are proposed.

Structure-directed formation of the dative/covalent bonds in complexes with C70piperidine

The combined experimental-computational study has been performed to investigate the complexes formed between C70 carbon allotrope and piperidine. The results of FT-IR, H-NMR, and C-NMR measurements, together with the calculations based on the DFT approach and molecular dynamics simulations, prove the existence of dative/covalent bonding in C70piperidine complexes. The dative bond forms not only at the region of five- and six-membered rings, observed previously with C60, but also at the region formed of six-membered rings. The structure, i.e., nonplanarity, explains the observed dative bond formation. New findings on the character of interaction of secondary amines with C70 bring new aspects for the rational design of modified fullerenes and their applications in electrocatalysis, spintronics, and energy storage.

Position selective dielectric polarization enhancement in CNT based heterostructures for highly efficient microwave absorption

Constructing carbon nanotube (CNT) based heterostructures has proven to be an effective way of improving the microwave absorption (MA) capability of these materials, regardless of whether the heterostructures are located on the inner or outer walls of the CNTs. However, the potential of the two sides of CNTs for constructing efficient MA heterostructures has not been compared, and the underlying mechanism behind this difference has not been determined. Therefore, CNT based heterostructures with Fe2O3 nanoparticles inside (Fe2O3-in-CNTs) and outside (Fe2O3-out-CNTs) of the CNTs were synthesized and characterized. The minimum reflection loss and maximum effective bandwidth of the Fe2O3-in-CNTs are -34.1 dB at 3.0 mm and 5.1 GHz at 2.6 mm, much better than those of the Fe2O3-out-CNTs. Stronger interfacial polarization at the inner surface of the CNTs than at the outer surface was confirmed using off-axis electron holography, which is regarded as the key factor that determines the excellent MA performance of the heterointerface constructed by the inner surface of the CNTs. The attractive potential of the inner surface of CNTs for constructing highly efficient MA heterostructures has, to our knowledge, not been proposed before, the findings of which can shed the light on the approach of developing CNT composited MA materials that have outstanding MA properties.

Ab initio predictions of graphite-like phase with anomalous grain boundaries and flexoelectricity from collapsed carbon nanotubes

Although large-radius carbon nanotubes (CNTs) are now available in macroscopic quantities, little is known about their condensed phase. Large-scale density functional theory calculations predict a low energy phase in which the same-diameter "dog-bone" collapsed CNTs form a graphite-like phase with complex, anomalous grain boundaries (GBs). The excess GB volume does not prevent the strong van der Waals coupling of the flattened CNT sides into AB stacking. The associated GB energetics is dominated by the van der Waals energy penalty and high curvature bending of the loop CNT edges, which exhibit reactivity and flexoelectricity. The large density and superior mechanical rigidity of the proposed microstructural organization as well as the GB flexoelectricity are desirable properties for developing ultra-strong composites based on large-radius CNTs.

Geodesic-Planar Conjugates: Substituted Buckybowls-Synthesis, Photoluminescence and Electrochemistry

C-C cross coupling products of bowl-shaped as-indaceno[3,2,1,8,7,6-pqrstuv]picene (Idpc) and different planar arenes and ethynyl-arenes were synthesized. Photoluminescence as well as electrochemical properties of all products were investigated and complemented by time-dependent quantum chemical calculations. UV/Vis spectroelectrochemistry investigations of the directly linked (Idpc)2 indicated the absence of any intramolecular charge-transfer transition of intermittently formed (Idpc)2 .- . All coupling products showed fluorescence. Ferrocene-1-yl-Idpc was structurally characterized by X-ray diffraction and is a rare example of a ferrocene-containing buckybowl exhibiting luminescence.

First-principles description of electrocatalytic characteristics of graphene-like materials

Graphene-like materials (GLMs) have received much attention as a potential alternative to precious metal-based electrocatalysts. However, the description of their electrocatalytic characteristics may still need to be improved, especially under constant chemical potential. Unlike the case of conventional metal electrodes, the potential drop across the electrical double layer (ϕ_D) at the electrode-electrolyte interface can deviate substantially from the applied voltage (ϕ_app) due to a shift of the Dirac point (eϕ_G) with charging. This may in turn significantly alter the interfacial capacitance (C_T) and the relationship between ϕ_app and free-energy change (ΔF). Hence, accurate evaluation of the electrode contribution is necessary to better understand and optimize the electrocatalytic properties of GLMs. In this work, we revisit and compare first-principles methods available to describe the ϕ_app-∆F relation. Grand-canonical density functional theory is used to determine ΔF as a function of ϕ_app or electrode potential (ϕ_q), from which the relative contribution of eϕ_G is estimated. In parallel, eϕ_G is directly extracted from a density functional theory analysis of the electronic structure of uncharged GLMs. The results of both methods are found to be in close agreement for pristine graphene, but their predictions deviate noticeably in the presence of adsorbates; the origin of the discrepancy is analyzed and explained. We then evaluate the application of the first-principle methods to prediction of the electrocatalytic processes, taking the reduction (hydrogenation) and oxidation (hydroxylation) reactions on pristine graphene as examples. Our work highlights the vital role of the modification of the electrode electronic structure in determining the electrocatalytic performance of GLMs.

Synthesis and applications of amino-functionalized carbon nanomaterials

Carbon-based nanomaterials (CNMs) have attracted considerable attention in the scientific community both from a scientific and an industrial point of view. Fullerenes, carbon nanotubes (CNTs), graphene and carbon dots (CDs) are the most popular forms and continue to be widely studied. However, the general poor solubility of many of these materials in most common solvents and their strong tendency to aggregate remains a major obstacle in practical applications. To solve these problems, organic chemistry offers formidable help, through the exploitation of tailored approaches, especially when aiming at the integration of nanostructures in biological systems. According to our experience with carbon-based nanostructures, the introduction of amino groups is one of the best trade-offs for the preparation of functionalized nanomaterials. Indeed, amino groups are well-known for enhancing the dispersion, solubilization, and processability of materials, in particular of CNMs. Amino groups are characterized by basicity, nucleophilicity, and formation of hydrogen or halogen bonding. All these features unlock new strategies for the interaction between nanomaterials and other molecules. This integration can occur either through covalent bonds (e.g., via amide coupling) or in a supramolecular fashion. In the present Feature Article, the attention will be focused through selected examples of our approach to the synthetic pathways necessary for the introduction of amino groups in CNMs and the subsequent preparation of highly engineered ad hoc nanostructures for practical applications.

Porphyrin-based systems containing polyaromatic fragments: decoupling the synergistic effects in aromatic-porphyrin-fullerene systems

In this work, we report a two-step synthesis that allows the introduction of four pyrene or corannulene fragments at the para position of meso-tetraarylporphyrins using a microwave-assisted quadruple Suzuki–Miyaura reaction. Placing the PAHs at this position, further from the porphyrin core, avoids the participation of the porphyrin core in binding with fullerenes. The fullerene hosting ability of the four new molecular receptors was investigated by NMR titrations and DFT studies. Despite having two potential binding sites, the pyrene derivatives did not associate with C₆₀ or C₇₀. In contrast, the tetracorannulene derivatives bound C₆₀ and C₇₀, although with modest binding constants. In these novel para-substituted systems, the porphyrin core acts as a simple linker that does not participate in the binding process, which allows the system to be considered as two independent molecular tweezers; i.e., the first binding event is not transmitted to the second binding site. This behavior can be considered a direct consequence of the decoupling of the porphyrin core from the binding event.

Designed molecule for decoupling the synergistic supramolecular effects in aromatic-porphyrin-fullerene host–guest systems.

Graphdiyne Saturable Absorber for Passively Q-Switched Ho3+-Doped Laser

High-quality all-carbon nanostructure graphdiyne (GDY) saturable absorber was successfully fabricated and saturable absorption properties in the 2 μm region were characterized using a commercial mode-locked laser as a pulsed source. The fabricated GDY was first used as an optical switcher in a passively Q-switched Ho laser. Under absorbed pump power of 2.4 W, the maximum average output power and shortest pulse width were 443 mW and 1.38 µs, at a repetition rate of 29.72 kHz. The results suggest that GDY nanomaterial is a promising candidate as an optical modulator for generation of short pulses in Ho-doped lasers at 2.1 μm.

Controlling Defect-State Photophysics in Covalently Functionalized Single-Walled Carbon Nanotubes

ConspectusSingle-walled carbon nanotubes (SWCNTs) show promise as light sources for modern fiber optical communications due to their emission wavelengths tunable via chirality and diameter dependency. However, the emission quantum yields are relatively low owing to the existence of low-lying dark electronic states and fast excitonic diffusion leading to carrier quenching at defects. Covalent functionalization of SWCNTs addresses this problem by brightening their infrared emission. Namely, introduction of sp³-hybridized defects makes the lowest energy transitions optically active for some defect geometries and enables further control of their optical properties. Such functionalized SWCNTs are currently the only material exhibiting room-temperature single photon emission at telecom relevant infrared wavelengths. While this fluorescence is strong and has the right wavelength, functionalization introduces a variety of emission peaks resulting in spectrally broad inhomogeneous photoluminescence that prohibits the use of SWCNTs in practical applications. Consequently, there is a strong need to control the emission diversity in order to render these materials useful for applications. Recent experimental and computational work has attributed the emissive diversity to the presence of multiple localized defect geometries each resulting in distinct emission energy. This Account outlines methods by which the morphology of the defect in functionalized SWCNTs can be controlled to reduce emissive diversity and to tune the fluorescence wavelengths. The chirality-dependent trends of emission energies with respect to individual defect morphologies are explored. It is demonstrated that defect geometries originating from functionalization of SWCNT carbon atoms along bonds with strong π-orbital mismatch are favorable. Furthermore, the effect of controlling the defect itself through use of different chemical groups is also discussed. Such tunability is enabled due to the formation of specific defect geometries in close proximity to other existing defects. This takes advantage of the changes in π-orbital mismatch enforced by existing defects and the resulting changes in reactivities toward formation of specific defect morphologies. Furthermore, the trends in emissive energies are highly dependent on the value of mod(n-m,3) for an (n,m) tube chirality. These powerful concepts allow for a targeted formation of defects that emit at desired energies based on SWCNT single chirality enriched samples. Finally, the impact of functionalization with specific types of defects that enforce certain defect geometries due to steric constraints in bond lengths and angles to the SWCNT are discussed. We further relate to a similar effect that is present in systems where high density of surface defects is formed due to high reactant concentration. The outlined strategies suggested by simulations are instrumental in guiding experimental efforts toward the generation of functionalized SWCNTs with tunable emission energies.

Synthesis and assembly of extended quintulene

Quintulene, a non-graphitic cycloarene with fivefold symmetry, has remained synthetically elusive due to its high molecular strain originating from its curved structure. Here we report the construction of extended quintulene, which was unambiguously characterized by mass and NMR spectroscopy. The extended quintulene represents a naturally curved nanocarbon based on its conical molecular geometry. It undergoes dimerization in solution via π-π stacking to form a metastable, but isolable bilayer complex. Thermodynamic and kinetic characterization reveals the dimerization process as entropy-driven and following second-order kinetics with a high activation energy. These findings provide a deeper understanding of the assembly of conical nanocarbons. Comparison of optical properties of monomer and dimer points toward a H-type interlayer coupling in the dimer.

Relating the molecular topology and local geometry: Haddon's pyramidalization angle and the Gaussian curvature

The pyramidalization angle and spherical curvature are well-known quantities used to characterize the local geometry of a molecule and to provide a measure of regio-chemical activity of molecules. In this paper, we give a self-contained presentation of these two concepts and discuss their limitations. These limitations can bypass, thanks to the introduction of the notions of angular defect and discrete Gauss curvature coming from discrete differential geometry. In particular, these quantities can be easily computed for arbitrary molecules, trivalent or not, with bond of equal lengths or not. All these quantities have been implemented. We then compute all these quantities over the Tománek database covering an almost exhaustive list of fullerene molecules. In particular, we discuss the interdependence of the pyramidalization angle with the spherical curvature, angular defect, and hybridization numbers. We also explore the dependence of the pyramidalization angle with respect to some characteristics of the molecule, such as the number of atoms, the group of symmetry, and the geometrical optimization process.

Skeletal Rearrangements of the C240 Fullerene: Efficient Topological Descriptors for Monitoring Stone–Wales Transformations

Stone–Wales rearrangements of the fullerene surface are an uncharted field in theoretical chemistry. Here, we study them on the example of the giant icosahedral fullerene C240 to demonstrate the complex chemical mechanisms emerging on its carbon skeleton. The Stone–Wales transformations of C240 can produce the defected isomers containing heptagons, extra pentagons and other unordinary rings. Their formations have been described in terms of (i) quantum-chemically calculated energetic, molecular, and geometric parameters; and (ii) topological indices. We have found the correlations between the quantities from the two sets that point out the role of long-range topological defects in governing the formation and the chemical reactivity of fullerene molecules.