Engineering Active Interfaces on the Surface of Porous Single-Crystalline TiO2 Monoliths for Enhanced Catalytic Activity and Stability

The engineering design and construction of active interfaces represents a promising approach amidst numerous initiatives aimed at augmenting catalytic activity. Herein, we present a novel approach to incorporate interconnected pores within bulk single crystals for the synthesis of macroscopic porous single-crystalline rutile titanium oxide (R-TiO2). The porous single crystal (PSC) R-TiO2 couples a nanocrystalline framework as the solid phase with pores as the fluid phase within its structure, providing unique advantages in localized structure construction and in the field of catalysis. We successfully construct well-defined Ni cluster/TiO2 active interfaces by directly confining Ni clusters on the continuous lattice surface of PSC R-TiO2. We confirm that the lattice oxygen connected to the Ni clusters exhibits exceptional activation capability at temperatures close to room temperature compared to the pure phase PSC R-TiO2 monoliths. The PSC Ni/TiO2 catalyst demonstrates complete CO oxidation and stable catalytic performance during continuous operation in air at ~80 °C for 200 h.

A catalytic perspective to nanomaterials reactivity-based toxicity; implications for single- and multiple-component nanomaterials (nanocomposites)

The extended use of a given product normally precedes concerns about it. The reactivity-based nanotoxicity is a major concern that must be tackled from its fundamental understanding to its regulatory management. Moreover, concepts and ideas must seamlessly flow between relevant performers. Functional nanomaterials have been used in many fields; among these, catalysis is probably the earliest more extended application of nanomaterials, these are engineered to afford specific properties, and are typically known as Engineered Nanomaterials (ENMs). Heterogenous catalysis shares its basic features with reactivity-based toxicity. In both cases, we are dealing with phenomena triggered by reactions occurring at the surface of the nanomaterial. Therefore, the extensive knowledge in heterogeneous catalysis is key to understanding reactivity-based nanotoxicology. In this regard, determining surface exposure is fundamental to mechanistically comprehend dose-response, similar to how catalysis shifted from mass-based to surface-centered metrics. Catalysis science made a further refinement iteration: reactions occur at surfaces, though not all surfaces are necessarily reactive, making it crucial to normalize per reactive site. This perspective focuses on two key aspects that link heterogeneous catalysis and reactivity-based nanotoxicity: the reactive sites on the surface of nanomaterials and how different combinations of nanomaterials appear and perform. A comment is also made regarding the somewhat vague term 'multicomponent nanomaterial,' which is contrasted with the well-defined, established, and widely accepted term 'nanocomposite' within the chemical community. Clear and precise terminology and concepts are essential for effective research and regulation.

Asymmetric Coupled Binuclear-Site Catalysts for Low-Temperature Selective Acetylene Semi-Hydrogenation

Heterogeneous metal catalysts with bifunctional active sites are widely used in chemical industries. Although their improvement process is typically based on trial-and-error, it is hindered by the lack of model catalysts. Herein, we report an effective vacancy-pair capturing strategy to fabricate 12 heterogeneous binuclear-site catalysts (HBSCs) comprising combinations of transition metals on titania. During the synthesis of these HBSCs, proton-passivation treatment and step-by-step electrostatic anchorage enabled the suppression of single-atom formation and the successive capture of two target metal cations on the titanium-oxygen vacancy-pair site. Additionally, during acetylene hydrogenation at 20 °C, the HBSCs (e.g., Pt1Pd1-TiO2) consistently generated more than two times the ethylene produced by their single-atom counterparts (e.g., Pd1-TiO2). Furthermore, the Pt1Pd1 binuclear sites in Pt1Pd1-TiO2 were demonstrated to catalyze C2H2 hydrogenation via a bifunctional active-site mechanism: initially C2H2 chemisorb on the Pt1 site, then H2 dissociates and migrates from Pd1 to Pt1, and finally hydrogenation occurs at the Pt1-Pd1 interface.

The Interfacial Interpenetration Effect for Controlled Reaction Stability of Palladium Catalysts

Tailoring well-defined interfacial structures of heterogeneous metal catalysts has become an effective strategy for identifying the interface relationships and facilitating the reactions involving multiple intermediates. Here, a particle-particle heterostructure catalyst consisting of Pd and copper oxide nanoparticles is designed to achieve high-performance alkaline methanol oxidation electrocatalysis. The strong coupling particle-particle heterostructure catalyst induced a unique interfacial interpenetration effect to improve the interfacial charge redistribution and regulate the d-band structure for optimizing the adsorption of CO intermediates on the catalyst. The resulting catalyst shows impressive mass activity (4.0 A mgPd-1) and current density (215.8 mA cm-2) for the methanol oxidation reaction (MOR) in alkaline media, which is 80.0 and 154.1 times higher than 10% Pd/C. The catalyst also exhibited outstanding stability for the MOR without obvious mass activity decay after 30,000 cycles. Experimental results and theoretical simulation (DFT) studies show that the chemical bond of the Cu-O-Pd interface can be regulated by the Pd penetration effect, greatly improving the activity and stability of the MOR. The present work exhibits the superiority of the metal particle-metal oxide heterostructure interface toward the rational design of advanced electrocatalysts.

Metal oxide plating for maximizing the performance of ruthenium(IV) oxide-catalyzed electrochemical oxygen evolution reaction

Hydrogen production by proton exchange membrane water electrolysis requires an anode with low overpotential for oxygen evolution reaction (OER) and robustness in acidic solution. While exploring new electrode materials to improve the performance and durability, optimizing the morphology of typical materials using new methods is a big challenge in materials science. RuO2 is one of the most active and stable electrocatalysts, but further improvement in its performance and cost reduction must be achieved for practical use. Herein, we present a novel technology, named "metal oxide plating", which can provide maximum performances with minimum amount. A uniform single-crystal RuO2 film with thickness of ∼2.5 nm was synthesized by a solvothermal-post heating method at an amount (x) of only 18 μg cm-2 (ST-RuO2(18)//TiO2 NWA). OER stably proceeds on ST-RuO2(18)//TiO2 NWA with ∼100% efficiency to provide a mass-specific activity (MSA) of 341 A gcat-1 at 1.50 V (vs. RHE), exceeding the values for most of the state-of-the-art RuO2 electrodes.

Dynamic phase transitions dictate the size effect and activity of supported gold catalysts

The landmark discovery of gold catalysts has aroused substantial interest in heterogeneous catalysis, yet the catalytic mechanism remains elusive. For carbon monoxide oxidation on gold nanoparticles (NPs) supported on ceria surfaces, it is widely believed that carbon monoxide adsorbs on the gold particles, while the reaction occurs at the gold/ceria interface. Here, we have investigated the dynamic changes of supported gold NPs with various sizes in a carbon monoxide oxidation atmosphere using deep potential molecular dynamics simulations. Our results reveal that the structure of tiny gold particles in carbon monoxide atmospheres becomes highly disordered and undergoes phase transition. Such a liquid-like structure provides massive reactive sites, enabling facile carbon monoxide oxidation on the solid-state gold NP rather than just at the gold/ceria interface. This result is further corroborated by catalytic experiments. This work sheds light on both the size effects and activity in noble metal catalysis and provides insights for the design of more effective nanocatalysts.

Unraveling the Oxygen Vacancy-Performance Relationship in Perovskite Oxides at Atomic Precision via Precise Synthesis

Understanding the fundamental effect of the oxygen vacancy atomic structure in perovskite oxides on catalytic properties remains challenging due to diverse facets, surface sites, defects, etc. in traditional powder catalysts and the inherent structural complexity. Through quantitative synthesis of tetrahedral (LaCoO2.5-T), pyramidal (LaCoO2.5-P), and octahedral (LaCoO3) epitaxial thin films as model catalysts, we demonstrate the reactivity orders of active-site geometrical configurations in oxygen-deficient perovskites during the CO oxidation model reaction: CoO4 tetrahedron > CoO6 octahedron > CoO5 pyramid. Ambient-pressure Co L-edge and O K-edge XAS spectra clarify the dynamic evolutions of active-site electronic structures during realistic catalytic processes and highlight the important roles of defect geometrical structures. In addition, in situ XAS and resonant inelastic X-ray scattering spectra and density functional theory calculations directly reveal the nature of high reactivity for CoO4 sites and that the derived shallow-acceptor defect levels in the band structure facilitate the adsorption and activation of reactive gases, resulting in more than 23-fold enhancement for catalytic reaction rates than CoO5 sites.

Construction of Pt─O Sites on Pt Nanoclusters in Silicalite-1 Zeolite for Efficient Catalytic Oxidation of Hydrogen Isotope Gases

The construction, use, and maintenance of tritium-related equipment will inevitably produce tritium-containing radioactive waste gas, and the production of efficient catalysts for tritium removal remains a difficult problem. Herein, silicalite-1 zeolite with entrapped Pt nanoclusters is skillfully post-oxidized at an appropriate temperature, building highly active Pt─O sites on the nanoclusters to achieve efficient oxidation of hydrogen isotopes at low temperatures. The designed Pt─O sites can directly participate in the oxidation reaction of hydrogen isotopes. Compared to the case without Pt─O sites, the presence of these sites significantly reduces the reaction energy barrier to 0.55 eV, enabling the catalyst to achieve a hydrogen conversion rate of 99% at a low temperature of 40 °C. Specifically, the O atoms consumed by the Pt─O sites in the reaction are replaced by O2 gas and this cycle repeats, which is consistent with the Mars-van Krevelen (M-K) theory. This ensures efficient catalytic oxidation of hydrogen isotopes, and provides an astonishingly high conversion rate of 99% in the nearly 34 days restart performance test. The results of this study provide insights into the strategic design of efficient catalysts for hydrogen isotope oxidation.

Growth Mechanism of Carbon Nanotubes Revealed by in situ Transmission Electron Microscopy

Elucidating the growth mechanism of carbon nanotubes (CNTs) is critical to obtaining CNTs with desired structures and tailored properties for their practical applications. With atomic resolution imaging, in situ transmission electron microscopy (TEM) has been a key technique to reveal the microstructure and dynamics of CNTs in real time. In this review, recent advances in the development of in situ TEM with different types of environmental reactors will be introduced. The catalytic growth mechanisms of CNTs revealed by in situ TEM under realistic conditions are discussed from fundamental thermodynamics and kinetics to the detailed nucleation, growth, and termination mechanisms, including the state and phase of active catalysts, interfacial connections between catalyst and growing CNTs, and catalyst-related growth kinetics of CNTs. Great progresses have been made on how a CNT nucleates, grows and terminates, focusing on the interface dynamics and kinetic fluctuations. Finally, challenges and future directions for understanding the atomic dynamics under the real growth conditions are proposed. It is expected that breakthroughs in the fundamental growth mechanisms will pave the way to the ultimate goal of designing and controlling the atomic structures of CNTs for their applications in various devices.

Revealing Dynamics and Competitive Mechanism of Gas-Induced Surface Segregation of PdFe0.08 Dilute Alloy by Multi-Dimensional Imaging

The restructuring of dilute alloys under gas environments has shown a great impact on their catalytic performance due to intriguing structural sensitivity, but the structural dynamics and underlying mechanism remains elusive. Herein, we directly resolved the distinct dynamic behaviors of PdFe0.08 dilute alloys under CO or O2 environment by multidimensional imaging. The stronger binding of gaseous CO with Fe atoms stimulates Fe segregation out of the PdFe0.08, resulting in 3D growth of Fe islands, whereas the dissociative adsorption of O2 results in 2D layer-by-layer growth of segregated FeO as encapsulation overlayers that bind strongly with the Pd surface underneath. Such varied structures remarkably tune the catalytic activity for CO oxidation, showing a considerably high activity for a CO-treated sample. Our results reveal the competitive mechanism between adsorbate-metal and metal-metal interaction for gas-induced surface segregation, which should be highly considered for the rational design of dilute alloys with dynamically tuned structure and reactivity.

Effect of Pt Nanoparticle Morphology on the Aerobic Oxidation of Ethylene Glycol to Glycolic Acid in Water

Pt nanoparticles (diameter <3 nm), generated by metal vapor synthesis and supported on a high surface area carbon, were used to catalyze the aerobic oxidation of ethylene glycol to glycolic acid (GA) in water under neutral and basic reaction conditions. Controlled heat treatment of the catalyst under a nitrogen atmosphere brought about the formation of a morphologically well-defined catalyst. A combination of atomic resolution electron microscopy, CO stripping voltammetry, and XPS analyses conducted on as-synthesized and heat-treated catalysts demonstrated the crucial role of the nanoparticles' morphology on the stabilization of catalytically highly active Pt-OH surface species, which were key species for the Pt-catalyzed oxidation of the alcohol to the carbonyl functionality. The boosting effect of base on the catalyst' s activity and GA selectivity has been proved experimentally (autoclave experiments). The effect of base on the nonmetal-catalyzed reaction steps (i.e., aerobic oxidation of carbonyl to acid functionality) has been proved by DFT calculations.

Using In situ Transmission Electron Microscopy to Study Strong Metal-Support Interactions in Heterogeneous Catalysis

Precisely controlling the microstructure of supported metal catalysts and regulating metal-support interactions at the atomic level are essential for achieving highly efficient heterogeneous catalysts. Strong metal-support interaction (SMSI) not only stabilizes metal nanoparticles and improves their resistance to sintering but also modulates the electrical interaction between metal species and the support, optimizing the catalytic activity and selectivity. Therefore, understating the formation mechanism of SMSI and its dynamic evolution during the chemical reaction at the atomic scale is crucial for guiding the structural design and performance optimization of supported metal catalysts. Recent advancements in in situ transmission electron microscopy (TEM) have shed new light on these complex phenomena, providing deeper insights into the SMSI dynamics. Here, the research progress of in situ TEM investigation on SMSI in heterogeneous catalysis is systematically reviewed, focusing on the formation dynamics, structural evolution during the catalytic reactions, and regulation methods of SMSI. The significant advantages of in situ TEM technologies for SMSI research are also highlighted. Moreover, the challenges and probable development paths of in situ TEM studies on the SMSI are also provided.

Thermally Stable Oxide-Capsulated Metal Nanoparticles Structure for Strong Metal-Support Interaction via Ultrafast Laser Plasmonic Nanowelding

Strong metal-support interaction (SMSI) has drawn much attention in heterogeneous catalysts due to its stable and excellent catalytic efficiency. However, construction of high-performance oxide-capsulated metal nanostructures meets great challenge in materials thermodynamic compatibility. In this work, dynamically controlled formation of oxide-capsulated metal nanoparticles (NPs) structures is demonstrated by ultrafast laser plasmonic nanowelding. Under the strong localized electromagnetic field interaction, metal (Au) NPs are dragged by an optical force toward oxide NPs (TiO2). Intense energy is simultaneously injected into this heterojunction area, where TiO2 is precisely ablated. With the embedding of metal into oxide, optical force on Au gradually turned from attractive to repulsive due to the varied metal-dielectric environment. Meanwhile, local ablated oxides are redeposited on Au NP. Upon the whole coverage of metal NP, the implantation behavior of metal NP is stopped, resulting in a controlled metal-oxide eccentric structure with capsulated oxide layer thickness ≈0.72-1.30 nm. These oxide-capsulated metal NPs structures can preserve their configurations even after thermal annealing in air at 600 °C for 10 min. This ultrafast laser plasmonic nanowelding can also extend to oxide-capsulated metal nanostructure fabrication with broad materials combinations (e.g., Au/ZnO, Au/MgO, etc.), which shows great potential in designing/constructing nanoscale high-performance catalysts.

Stabilizing Fe Single Atoms on Rutile-TiO2(110) Surface Via Atomic Substitution

Stable anchoring of dispersed metal atoms through either surface adsorption or lattice substitution on support surfaces is a prerequisite for highly efficient catalytic performance. Atomic-level insights into these processes are necessary to understand the metal-support interactions. Here, we identify multiple Fe single-atom configurations on the rutile-TiO2(110) surface using scanning tunneling microscopy (STM) and density functional theory (DFT). Our results show that an Fe atom can either adsorb on a surface O site (configuration I) or stably substitute a surface lattice Ti atom (configuration II). A transformation from configuration I to configuration II can be induced by STM manipulation. Furthermore, the substitutional Fe atom can capture an additional Fe atom to form a dual Fe-Fe complex (configuration III). DFT calculations reveal that these Fe species contribute different states in either the bandgap or the conduction band. These atomistic insights pave the way for interrogating the integrated performance of nonprecious, TiO2-supported Fe single-atom catalysts.

Surface and interfacial sciences for future technologies

Physical science has undergone an evolutional transition in research focus from solid bulks to surfaces, culminating in numerous prominent achievements. Currently, it is experiencing a new exploratory phase-interfacial science. Many a technology with a tremendous impact is closely associated with a functional interface which delineates the boundary between disparate materials or phases, evokes complexities that surpass its pristine comprising surfaces, and thereby unveils a plethora of distinctive properties. Such an interface may generate completely new or significantly enhanced properties. These specific properties are closely related to the interfacial states formed at the interfaces. Therefore, establishing a quantitative relationship between the interfacial states and their functionalities has become a key scientific issue in interfacial science. However, interfacial science also faces several challenges such as invisibility in characterization, inaccuracy in calculation, and difficulty in precise construction. To tackle these challenges, people must develop new strategies for precise detection, accurate computation, and meticulous construction of functional interfaces. Such strategies are anticipated to provide a comprehensive toolbox tailored for future interfacial science explorations and thereby lay a solid scientific foundation for several key future technologies.

Visualizing Surface-Subsurface Cu Atom Exchange at the FeO/Pt(111) Surface Induced by CO Adsorption at 150 K

Structural evolution of solid catalyst surfaces induced by direct exposure to reaction gas has been extensively studied and is well understood. However, whether and how subsurface atomic structures are affected by the reaction atmosphere require further exploration. In this work, our results confirm that Cu clusters supported on FeO/Pt(111) (Cun/FeO/Pt) transform into surface CuCO complexes (CuCO/FeO/Pt) with exposure to CO at 78 K. Surprisingly, Cu clusters on Pt(111) buried under monolayer FeO film (FeO/Cun/Pt) can also transform into surface CuCO complexes on FeO/Pt(111) upon CO adsorption at 150 K. The place exchange of surface and subsurface Cu atoms at the FeO/Pt(111) surface can be mediated by exposing to CO at 150 K and keeping in ultrahigh vacuum at 300 K, alternatively. Calculation results reveal that CO adsorption induces restructuring of the FeO film above the Cu clusters, generating a diffusion channel for Cu atoms to pass through the FeO film and form surface CuCO, while Cu atoms remaining at the FeO-Pt interface are more thermodynamically favored without CO. Our work suggests that buried subsurface atoms may be involved in strong restructuring processes driven by reaction gas, which could strongly influence the catalytic performance.

Simulating Structural Dynamics of Metal Catalysts under Operative Conditions

Structural reconstructions of metal catalysts have been recognized as common phenomena during catalytic reactions, which play a key role in their activities in heterogeneous catalysis. Precisely identifying the structures under the operative conditions becomes a prerequisite to establish a reliable structure-activity relationship and further rationalize the design of metal catalysts. However, real-time capture of the structural variations of catalysts at the atomic level with high-temporal resolution is a grand challenge for present in situ characterizations. During the past decade, significant progress has been made in theory to couple the structures with the reaction conditions to reproduce the experimental observations and predict the adsorbate-induced changes of catalysts in composition, morphology, size, etc. Modeling the dynamic correlation between the structure and activity of the metal catalysts brings us advanced knowledge of heterogeneous catalysis and becomes indispensable for accurate evaluation of the performance of metal catalysts.

A CeO2 (100) surface reconstruction unveiled by in situ STEM and particle swarm optimization techniques

The reconstruction of the polar CeO2 (100) surface has been a subject of long-standing debates due to its complexity and the limited availability of experimental data. Herein, we successfully reveal a CeO2 (100)-(4 × 6) surface reconstruction by combining in situ spherical aberration-corrected scanning transmission electron microscopy, density functional theory calculations, and a particle swarm optimization-based algorithm for structure searching. We have further elucidated the stabilizing mechanism of the reconstructed structure, which involves the splitting of the filled Ce(4f) states and the mixing of the lower-lying ones with the O(2p) orbitals, as evidenced by the projected density of states. We also reveal that the surface chemisorption properties toward water molecules, an important step in numerous heterogeneous catalytic reactions, are enhanced. These insights into the distinct properties of ceria surface pave the way for performance improvements of ceria in a wide range of applications.

Efficient plasmonic water splitting by heteroepitaxial junction-induced faceting of gold nanoparticles on an anatase titanium(IV) oxide nanoplate array electrode

Plasmonic photocatalysts represented by gold nanoparticle (NP)-loaded titanium(IV) oxide (Au/TiO2) can be promising solar-to-fuel converters by virtue of their response to visible-to-near infrared light. Hitherto, Au/rutile (R)-TiO2 has been recognized as exhibiting photocatalytic activity higher than that of Au/anatase (A)-TiO2. Herein, we demonstrate that the high potential of A-TiO2 as the Au NP support can be brought out through atomic level interface control. Faceting of Au NPs is induced by a heteroepitaxial junction on an A-TiO2(001) nanoplate array (Au/A-TiO2 NPLA). Photoexcitation towards the Au/A-TiO2 NPLA electrode generates current for the water oxidation reaction at λ < 900 nm with a maximum efficiency of 0.39% at λ = 600 nm, which is much larger than the values reported so far for the usual electrodes. The striking activity of the Au/A-TiO2 NPLA electrode was rationalized using a potential-dependent Fowler model. This study presented a novel approach for developing solar-driven electrodes for green and sustainable fuel production.

Machine Learning Molecular Dynamics Shows Anomalous Entropic Effect on Catalysis through Surface Pre-melting of Nanoclusters

Due to the superior catalytic activity and efficient utilization of noble metals, nanocatalysts are extensively used in the modern industrial production of chemicals. The surface structures of these materials are significantly influenced by reactive adsorbates, leading to dynamic behavior under experimental conditions. The dynamic nature poses significant challenges in studying the structure-activity relations of catalysts. Herein, we unveil an anomalous entropic effect on catalysis via surface pre-melting of nanoclusters through machine learning accelerated molecular dynamics and free energy calculation. We find that due to the pre-melting of shell atoms, there exists a non-linear variation in the catalytic activity of the nanoclusters with temperature. Consequently, two notable changes in catalyst activity occur at the respective temperatures of melting for the shell and core atoms. We further study the nanoclusters with surface point defects, i.e. vacancy and ad-atom, and observe significant decrease in the surface melting temperatures of the nanoclusters, enabling the reaction to take place under more favorable and milder conditions. These findings not only provide novel insights into dynamic catalysis of nanoclusters but also offer new understanding of the role of point defects in catalytic processes.

Going for Gold(-Standard): Attaining Coupled Cluster Accuracy in Oxide-Supported Nanoclusters

The structure of oxide-supported metal nanoclusters plays an essential role in their sharply enhanced catalytic activity over that of bulk metals. Simulations provide the atomic-scale resolution needed to understand these systems. However, the sensitive mix of metal-metal and metal-support interactions, which govern their structure, puts stringent requirements on the method used, requiring calculations beyond standard density functional theory (DFT). The method of choice is coupled cluster theory [specifically CCSD(T)], but its computational cost has so far prevented its application to these systems. In this work, we showcase two approaches to make CCSD(T) accuracy readily achievable in oxide-supported nanoclusters. First, we leverage the SKZCAM protocol to provide the first benchmarks of oxide-supported nanoclusters, revealing that it is specifically metal-metal interactions that are challenging to capture with DFT. Second, we propose a CCSD(T) correction (ΔCC) to the metal-metal interaction errors in DFT, reaching accuracy comparable to that of the SKZCAM protocol at significantly lower cost. This approach forges a path toward studying larger systems at reliable accuracy, which we highlight by identifying a ground-state structure in agreement with experiments for Au20 on MgO, a challenging system where DFT models have yielded conflicting predictions.

Dynamic Active Sites In Situ Formed in Metal Nanoparticle Reshaping under Reaction Conditions

Understanding the nonequilibrium transformation of nanocatalysts under reaction conditions is important because metastable atomic structures may be created during the process, which offers unique activities in reactions. Although reshaping of metal nanoparticles (NPs) under reaction conditions has been widely recognized, the dynamic reshaping process has been less studied at the atomic scale. Here, we develop an atomistic kinetic Monte Carlo model to simulate the complete reshaping process of Pt nanoparticles in a CO environment and reveal the in situ formation of atomic clusters on the NP surface, a new type of active site beyond conventional understanding, boosting the reactivities in the CO oxidation reaction. Interestingly, highly active peninsula and inactive island clusters both form on the (111) facets and interchange in varying states of dynamic equilibrium, which influences the catalytic activities significantly. This study provides new fundamental knowledge of nanocatalysis and new guidance for the rational design of nanocatalysts.

Reverse water gas-shift reaction product driven dynamic activation of molybdenum nitride catalyst surface

In heterogeneous catalysis catalyst activation is often observed during the reaction process, which is mostly attributed to the induction by reactants. In this work we report that surface structure of molybdenum nitride (MoNx) catalyst exhibits a high dependency on the partial pressure or concentration of reaction products i.e., CO and H2O in reverse water gas-shift reaction (RWGS) (CO2:H2 = 1:3) but not reactants of CO2 and H2. Molybdenum oxide (MoOx) overlayers formed by oxidation with H2O are observed at reaction pressure below 10 mbar or with low partial pressure of CO/H2O products, while CO-induced surface carbonization happens at reaction pressure above 100 mbar and with high partial pressure of CO/H2O products. The reaction products induce restructuring of MoNx surface into more active molybdenum carbide (MoCx) to increase the reaction rate and make for higher partial pressure CO, which in turn promote further surface carbonization of MoNx. We refer to this as the positive feedback between catalytic activity and catalyst activation in RWGS, which should be widely present in heterogeneous catalysis.

In-situ TEM study from the perspective of holders

During the in situ transmission electron microscopy (TEM) observations, the diverse functionalities of different specimen holders play a crucial role. We hereby provide a comprehensive overview of the main types of holders, associated technologies and case studies pertaining to the widely employed heating and gas heating methods, from their initial developments to the latest advancement. In addition to the conventional approaches, we also discuss the emergence of holders that incorporate a micro-electro-mechanical system (MEMS) chip for in situ observations. The MEMS technology offers a multitude of functions within a single chip, thereby enhancing the capabilities and versatility of the holders. MEMS chips have been utilized in environmental-cell designs, enabling customized fabrication of diverse shapes. This innovation has facilitated their application in conducting in situ observations within gas and liquid environments, particularly in the investigation of catalytic and battery reactions. We summarize recent noteworthy studies conducted using in situ liquid TEM. These studies highlight significant advancements and provide valuable insights into the utilization of MEMS chips in environmental-cells, as well as the expanding capabilities of in situ liquid TEM in various research domains.

Computational insights into the zeolite-supported gold nanocluster-catalyzed ethanol dehydrogenation to acetaldehyde

Zeolite-supported gold nanoclusters play increasingly important roles in heterogeneous catalysis and exhibit unique catalytic properties for ethanol dehydrogenation to acetaldehyde. Nevertheless, the reaction mechanism and potential roles of the zeolite-encapsulated gold nanoclusters during the catalytic process remain unclear. Herein, computational studies were carried out to gain mechanistic insights into ethanol dehydrogenation to acetaldehyde under both aerobic and anaerobic conditions catalyzed by a silicalite-1 zeolite-encapsulated Au3 cluster cation (Au3+-S1). The presence of O2 can significantly promote the ethanol dehydrogenation catalyzed by Au3+-S1. A feasible mechanistic pathway could be initiated via the O2 induced H-atom transfer (HAT) step from the hydrogen of the hydroxyl group to afford ethoxy and OOH radical species. Subsequently, the OOH induced second HAT from α-C-H of the ethoxy intermediate could follow to afford the acetaldehyde product. Moreover, the possible confinement and stabilization effect of the zeolite channels on the ethanol dehydrogenation reaction was discussed.

Distinct Site Motifs Activate O2 and H2 on Supported Au Nanoparticles in Liquid Water

Au nanoparticles catalyze the activation and conversion of small molecules with rates and kinetic barriers that depend on the dimensions of the nanoparticle, composition of the support, and presence of catalytically culpable water molecules that solvate these interfaces. Here, molecular interpretations of steady-state rate measurements, kinetic isotope effects, and structural characterizations reveal how the interface of Au nanoparticles, liquid water, and metal oxide supports mediate the kinetically relevant activation of H2 and sequential reduction of O2-derived intermediates during the formation of H2O2 and H2O. Rates of H2 consumption are 10-100 fold greater on Au nanoparticles supported on metal oxides (e.g., titania) compared to more inert and hydrophobic materials (carbon, boron nitride). Similarly, Au nanoparticles on reducible and Lewis acidic supports (e.g., lanthana) bind dioxygen intermediates more strongly and present lower barriers (<22 kJ mol-1) for O-O bond dissociation than inert interfaces formed with silica (>70 kJ mol-1). Selectivities for H2O2 formation increase significantly as the diameters of the Au nanoparticles increase because differences in nanoparticle size change the relative fractions of exposed sites that exist at Au-support interfaces. In contrast, site-normalized rates and barriers for H2 activation depend weakly on the size of Au nanoparticles and the associated differences in active site motifs. These findings suggest that H2O aids the activation of H2 at sites present across all surface Au atoms when nanoparticles are solvated by water. However, molecular O2 preferentially binds and dissociates at Au-support interfaces, leading to greater structure sensitivity for barriers of O-O dissociation across different support identities and sizes of Au nanoparticles. These insights differ from prior knowledge from studies of gas-phase reactions of H2 and O2 upon Au nanoparticle catalysts within dilute vapor pressures of water (10-4 to 0.1 kPa H2O), in which catalysis occurs at the perimeter of the Au-support interface. In contrast, contacting Au catalysts with liquid water (55.5 M H2O) expands catalysis to all surface Au atoms and enables appreciable H2O2 formation.

Beam induced heating in electron microscopy modeled with machine learning interatomic potentials

We develop a combined theoretical and experimental method for estimating the amount of heating that occurs in metallic nanoparticles that are being imaged in an electron microscope. We model the thermal transport between the nanoparticle and the supporting material using molecular dynamics and equivariant neural network potentials. The potentials are trained to Density Functional Theory (DFT) calculations, and we show that an ensemble of potentials can be used as an estimate of the errors the neural network make in predicting energies and forces. This can be used both to improve the networks during the training phase, and to validate the performance when simulating systems too big to be described by DFT. The energy deposited into the nanoparticle by the electron beam is estimated by measuring the mean free path of the electrons and the average energy loss, both are done with Electron Energy Loss Spectroscopy (EELS) within the microscope. In combination, this allows us to predict the heating incurred by a nanoparticle as a function of its size, its shape, the support material, and the electron beam energy and intensity.

Direct in-situ insights into the asymmetric surface reconstruction of rutile TiO2 (110)

The reconstruction of rutile TiO2 (110) holds significant importance as it profoundly influences the surface chemistry and catalytic properties of this widely used material in various applications, from photocatalysis to solar energy conversion. Here, we directly observe the asymmetric surface reconstruction of rutile TiO2 (110)-(1×2) with atomic-resolution using in situ spherical aberration-corrected scanning transmission electron microscopy. Density functional theory calculations were employed to complement the experimental observations. Our findings highlight the pivotal role played by repulsive electrostatic interaction among the small polarons -formed by excess electrons following the removal of neutral oxygen atoms- and the subsequent surface relaxations induced by these polarons. The emergence and disappearance of these asymmetric structures can be controlled by adjusting the oxygen partial pressure. This research provides a deeper understanding, prediction, and manipulation of the surface reconstructions of rutile TiO2 (110), holding implications for a diverse range of applications and technological advancements involving rutile-based materials.

Significance of Epitaxial Growth of PtO2 on Rutile TiO2 for Pt/TiO2 Catalysts

TiO2-supported Pt species have been widely applied in numerous critical reactions involving photo-, thermo-, and electrochemical-catalysis for decades. Manipulation of the state of the Pt species in Pt/TiO2 catalysts is crucial for fine-tuning their catalytic performance. Here, we report an interesting discovery showing the epitaxial growth of PtO2 atomic layers on rutile TiO2, potentially allowing control of the states of active Pt species in Pt/TiO2 catalysts. The presence of PtO2 atomic layers could modulate the geometric configuration and electronic state of the Pt species under reduction conditions, resulting in a spread of the particle shape and obtaining a Pt/PtO2/TiO2 structure with more positive valence of Pt species. As a result, such a catalyst exhibits exceptional electrocatalytic activity and stability toward hydrogen evolution reaction, while also promoting the thermocatalytic CO oxidation, surpassing the performance of the Pt/TiO2 catalyst with no epitaxial structure. This novel epitaxial growth of the PtO2 structure on rutile TiO2 in Pt/TiO2 catalysts shows its potential in the rational design of highly active and economical catalysts toward diverse catalytic reactions.

Continuous Flow System for Highly Efficient and Durable Photocatalytic Oxidative Coupling of Methane

Photocatalytic oxidative coupling of methane (OCM) into value-added industrial chemicals offers an appealing green technique for achieving sustainable development, whereas it encounters double bottlenecks in relatively low methane conversion rate and severe overoxidation. Herein, we engineer a continuous gas flow system to achieve efficient photocatalytic OCM while suppressing overoxidation by synergizing the moderate active oxygen species, surface plasmon-mediated polarization, and multipoint gas intake flow reactor. Particularly, a remarkable CH4 conversion rate of 218.2 μmol h-1 with an excellent selectivity of ∼90% toward C2+ hydrocarbons and a remarkable stability over 240 h is achieved over a designed Au/TiO2 photocatalyst in our continuous gas flow system with a homemade three-dimensional (3D) printed flow reactor. This work provides an informative concept to engineer a high-performance flow system for photocatalytic OCM by synergizing the design of the reactor and photocatalyst to synchronously regulate the mass transfer, activation of reactants, and inhibition of overoxidation.

Charge State of Au Atoms on an Oxidized Rutile TiO2(110) Surface by AFM/KPFM at 78 K

The charge state of noble metal atoms on a semiconductor surface is an important factor in surface catalysis. In this study, Au atoms were deposited on the rutile TiO2(110) surface to characterize its charge properties using atomic force microscopy with Kelvin probe force microscopy at 78 K. Au single atoms, dimers, and trimers at different sites on the surface were investigated. Positively charged Au atoms were verified at oxygen sites, while negatively charged Au atoms were found near oxygen vacancy sites. Furthermore, the charge states of small Au nanoclusters were clarified. Understanding the charge states of Au atoms is significant for identifying their efficient catalytic effects in surface catalysis.

Self-propelled assembly of nanoparticles with self-catalytic regulation for tumour-specific imaging and therapy

Targeted assembly of nanoparticles in biological systems holds great promise for disease-specific imaging and therapy. However, the current manipulation of nanoparticle dynamics is primarily limited to organic pericyclic reactions, which necessitate the introduction of synthetic functional groups as bioorthogonal handles on the nanoparticles, leading to complex and laborious design processes. Here, we report the synthesis of tyrosine (Tyr)-modified peptides-capped iodine (I) doped CuS nanoparticles (CuS-I@P1 NPs) as self-catalytic building blocks that undergo self-propelled assembly inside tumour cells via Tyr-Tyr condensation reactions catalyzed by the nanoparticles themselves. Upon cellular internalization, the CuS-I@P1 NPs undergo furin-guided condensation reactions, leading to the formation of CuS-I nanoparticle assemblies through dityrosine bond. The tumour-specific furin-instructed intracellular assembly of CuS-I NPs exhibits activatable dual-modal imaging capability and enhanced photothermal effect, enabling highly efficient imaging and therapy of tumours. The robust nanoparticle self-catalysis-regulated in situ assembly, facilitated by natural handles, offers the advantages of convenient fabrication, high reaction specificity, and biocompatibility, representing a generalizable strategy for target-specific activatable biomedical imaging and therapy.

In Situ Transmission Electron Microscopy to Study the Location and Distribution Effect of Pt on the Reduction of Co3 O4 -SiO2

The addition of Pt generally promotes the reduction of Co3 O4 in supported catalysts, which further improves their activity and selectivity. However, due to the limited spatial resolution, how Pt and its location and distribution affect the reduction of Co3 O4 remains unclear. Using ex situ and in situ ambient pressure scanning transmission electron microscopy, combined with temperature-programmed reduction, the reduction of silica-supported Co3 O4 without Pt and with different location and distribution of Pt is studied. Shrinkage of Co3 O4 nanoparticles is directly observed during their reduction, and Pt greatly lowers the reduction temperature. For the first time, the initial reduction of Co3 O4 with and without Pt is studied at the nanoscale. The initial reduction of Co3 O4 changes from surface to interface between Co3 O4 and SiO2 . Small Pt nanoparticles located at the interface between Co3 O4 and SiO2 promote the reduction of Co3 O4 by the detachment of Co3 O4 /CoO from SiO2 . After reduction, the Pt and part of the Co form an alloy with Pt well dispersed. This study for the first time unravels the effects of Pt location and distribution on the reduction of Co3 O4 nanoparticles, and helps to design cobalt-based catalysts with efficient use of Pt as a reduction promoter.

Cation Concavities Induced d-Band Electronic Modulation on Co/FeOx Nanostructure to Activate Molecular and Interfacial Oxygen for CO Oxidation

Cobalt-based catalysts have been identified for effective CO oxidation, but their activity is limited by molecular O2 and interfacial oxygen passivation at low temperatures. Optimization of the d-band structure of the cobalt center is an effective method to enhance the dissociation of oxygen species. Here, we developed a novel Co/FeOx catalyst based on selective cationic deposition to anchor Co cations at the defect site of FeOx, which exhibited superior intrinsic low-temperature activity (100%, 115 °C) compared to that of Pt/Co3O4 (100%, 140 °C) and La/Co2O3 (100%, 150 °C). In contrast to catalysts with oxygen defects, the cationic Fe defect in Co/FeOx showed an exceptional ability to accept electrons from the Co 3d orbital, resulting in significant electron delocalization at the Co sites. The Co/FeOx catalyst exhibited a remarkable turnover frequency of 178.6 per Co site per second, which is 2.3 times higher than that of most previously reported Co-based catalysts. The d-band center is shifted upward by electron redistribution effects, which promotes the breaking of the antibonding orbital *π of the O═O bond. In addition, the controllable regulation of the Fe-Ov-Co oxygen defect sites enlarges the Fe-O bond from 1.97 to 2.02 Å to activate the lattice oxygen. Moreover, compared to CoxFe3-xO4, Co/FeOx has a lower energy barrier for CO oxidation, which significantly accelerates the rate-determining step, *COO formation. This study demonstrates the feasibility of modulating the d-band structure to enhance O2 molecular and interfacial lattice oxygen activation.

Carbon Encapsulation of Supported Metallic Iridium Nanoparticles: An in Situ Transmission Electron Microscopy Study and Implications for Hydrogen Evolution Reaction

Carbon-supported metal nanoparticles (NPs) comprise an important class of heterogeneous catalysts. The interaction between the metal and carbon support influences the overall material properties, viz., the catalytic performance. Herein we use in situ and ex situ transmission electron microscopy (TEM) in combination with in situ X-ray spectroscopy (XPS) to investigate the encapsulation of metallic iridium NPs by carbon in an Ir/C catalyst. Real-time atomic-scale imaging visualizes particle reshaping and increased graphitization of the carbon support upon heating of Ir/C in vacuum. According to in situ TEM results, carbon overcoating grows over Ir NPs during the heating process, starting from ca. 550 °C. With the carbon overlayers formed, no sintering and migration of Ir NPs is observed at 800 °C, yet the initial Ir NPs sinter at or below 550 °C, i.e., at a temperature associated with an incomplete particle encapsulation. The carbon overlayer corrugates when the temperature is decreased from 800 to 200 °C and this process is associated with the particle surface reconstruction and is reversible, such that the corrugated carbon overlayer can be smoothed out by increasing the temperature back to 800 °C. The catalytic performance (activity and stability) of the encapsulated Ir NPs in the hydrogen evolution reaction (HER) is higher than that of the initial (nonencapsulated) state of Ir/C. Overall, this work highlights microscopic details of the currently understudied phenomenon of the carbon encapsulation of supported noble metal NPs and demonstrates additionally that the encapsulation by carbon is an effective measure for tuning the catalytic performance.

Direct Operando Visualization of Metal Support Interactions Induced by Hydrogen Spillover During CO2 Hydrogenation

The understanding of catalyst active sites is a fundamental challenge for the future rational design of optimized and bespoke catalysts. For instance, the partial reduction of Ce4+ surface sites to Ce3+ and the formation of oxygen vacancies are critical for CO2 hydrogenation, CO oxidation, and the water gas shift reaction. Furthermore, metal nanoparticles, the reducible support, and metal support interactions are prone to evolve under reaction conditions; therefore a catalyst structure must be characterized under operando conditions to identify active states and deduce structure-activity relationships. In the present work, temperature-induced morphological and chemical changes in Ni nanoparticle-decorated mesoporous CeO2 by means of in situ quantitative multimode electron tomography and in situ heating electron energy loss spectroscopy, respectively, are investigated. Moreover, operando electron energy loss spectroscopy is employed using a windowed gas cell and reveals the role of Ni-induced hydrogen spillover on active Ce3+ site formation and enhancement of the overall catalytic performance.

Electrochemical interfacial catalysis in Co-based battery electrodes involving spin-polarized electron transfer

Interfacial catalysis occurs ubiquitously in electrochemical systems, such as batteries, fuel cells, and photocatalytic devices. Frequently, in such a system, the electrode material evolves dynamically at different operating voltages, and this electrochemically driven transformation usually dictates the catalytic reactivity of the material and ultimately the electrochemical performance of the device. Despite the importance of the process, comprehension of the underlying structural and compositional evolutions of the electrode material with direct visualization and quantification is still a significant challenge. In this work, we demonstrate a protocol for studying the dynamic evolution of the electrode material under electrochemical processes by integrating microscopic and spectroscopic analyses, operando magnetometry techniques, and density functional theory calculations. The presented methodology provides a real-time picture of the chemical, physical, and electronic structures of the material and its link to the electrochemical performance. Using Co(OH)2 as a prototype battery electrode and by monitoring the Co metal center under different applied voltages, we show that before a well-known catalytic reaction proceeds, an interfacial storage process occurs at the metallic Co nanoparticles/LiOH interface due to injection of spin-polarized electrons. Subsequently, the metallic Co nanoparticles act as catalytic activation centers and promote LiOH decomposition by transferring these interfacially residing electrons. Most intriguingly, at the LiOH decomposition potential, electronic structure of the metallic Co nanoparticles involving spin-polarized electrons transfer has been shown to exhibit a dynamic variation. This work illustrates a viable approach to access key information inside interfacial catalytic processes and provides useful insights in controlling complex interfaces for wide-ranging electrochemical systems.

Controlled Growth of Pd Nanocrystals by Interface Interaction on Monolayer MoS2: An Atom-Resolved in Situ Study

The crystal growth kinetics is crucial for the controllable preparation and performance modulation of metal nanocrystals (NCs). However, the study of growth mechanisms is significantly limited by characterization techniques, and it is still challenging to in situ capture the growth process. Real-time and real-space imaging techniques at the atomic scale can promote the understanding of microdynamics for NC growth. Herein, the growth of Pd NCs on monolayer MoS2 under different atmospheres was in situ studied by environmental transmission electron microscopy. Introducing carbon monoxide can modulate the diffusion of Pd monomers, resulting in the epitaxial growth of Pd NCs with a uniform orientation. The electron energy loss spectroscopy and theoretical calculations showed that the CO adsorption assured the specific exposed facets and good uniformity of Pd NCs. The insight into the gas-solid interface interaction and the microscopic growth mechanism of NCs may shed light on the precise synthesis of NCs on two-dimensional (2D) materials.

Defect-Mediated Growth of Crystallographic Shear Plane

As representative extended planar defects, crystallographic shear (CS) planes, namely Wadsley defects, play an important role in modifying the physical and chemical properties of metal oxides. Although these special structures have been intensively investigated for high-rate anode materials and catalysts, it is still experimentally unclear how the CS planes form and propagate at the atomic scale. Here, the CS plane evolution in monoclinic WO3 is directly imaged via in situ scanning transmission electron microscope. It is found that the CS planes nucleate preferentially at the edge step defects and proceed by the cooperative migration of WO6 octahedrons along particular crystallographic orientations, passing through a series of intermediate states. The local reconstruction of atomic columns tends to form (102) CS planes featured with four edge-sharing octahedrons in preference to the (103) planes, which matches well with the theoretical calculations. Associated with the structure evolution, the sample undergoes a semiconductor-to-metal transition. In addition, the controlled growth of CS planes and V-shaped CS structures can be achieved by artificial defects for the first time. These findings enable an atomic-scale understanding of CS structure evolution dynamics.

Light-Induced Dynamic Restructuring of Cu Active Sites on TiO2 for Low-Temperature H2 Production from Methanol and Water

The structure and configuration of reaction centers, which dominantly govern the catalytic behaviors, often undergo dynamic transformations under reaction conditions, yet little is known about how to exploit these features to favor the catalytic functions. Here, we demonstrate a facile light activation strategy over a TiO2-supported Cu catalyst to regulate the dynamic restructuring of Cu active sites during low-temperature methanol steam reforming. Under illumination, the thermally deactivated Cu/TiO2 undergoes structural restoration from inoperative Cu2O to the originally active metallic Cu caused by photoexcited charge carriers from TiO2, thereby leading to substantially enhanced activity and stability. Given the low-intensity solar irradiation, the optimized Cu/TiO2 displays a H2 production rate of 1724.1 μmol g-1 min-1, outperforming most of the conventional photocatalytic and thermocatalytic processes. Taking advantages of the strong light-matter-reactant interaction, we achieve in situ manipulation of the Cu active sites, suggesting the feasibility for real-time functionalization of catalysts.

Atomic Insights into Synergistic Nitroarene Hydrogenation over Nanodiamond-Supported Pt1 -Fe1 Dual-Single-Atom Catalyst

Fundamental understanding of the synergistic effect of bimetallic catalysts is of extreme significance in heterogeneous catalysis, but a great challenge lies in the precise construction of uniform dual-metal sites. Here, we develop a novel method for constructing Pt1 -Fe1 /ND dual-single-atom catalyst, by anchoring Pt single atoms on Fe1 -N4 sites decorating a nanodiamond (ND) surface. Using this catalyst, the synergy of nitroarenes selective hydrogenation is revealed. In detail, hydrogen is activated on the Pt1 -Fe1 dual site and the nitro group is strongly adsorbed on the Fe1 site via a vertical configuration for subsequent hydrogenation. Such synergistic effect decreases the activation energy and results in an unprecedented catalytic performance (3.1 s-1 turnover frequency, ca. 100 % selectivity, 24 types of substrates). Our findings advance the applications of dual-single-atom catalysts in selective hydrogenations and open up a new way to explore the nature of synergistic catalysis at the atomic level.

Revealing Temperature-Dependent Oxidation Dynamics of Ni Nanoparticles via Ambient Pressure Transmission Electron Microscopy

Understanding the oxidation mechanism of metal nanoparticles under ambient pressure is extremely important to make the best use of them in a variety of applications. Through ambient pressure transmission electron microscopy, we in situ investigated the dynamic oxidation processes of Ni nanoparticles at different temperatures under atmospheric pressure, and a temperature-dependent oxidation behavior was revealed. At a relatively low temperature (e.g., 600 °C), the oxidation of Ni nanoparticles underwent a classic Kirkendall process, accompanied by the formation of oxide shells. In contrast, at a higher temperature (e.g., 800 °C), the oxidation began with a single crystal nucleus at the metal surface and then proceeded along the metal/oxide interface without voids formed during the whole process. Through our experiments and density functional theory calculations, a temperature-dependent oxidation mechanism based on Ni nanoparticles was proposed, which was derived from the discrepancy of gas adsorption and diffusion rates under different temperatures.

Activating lattice oxygen of single-layer ZnO for the catalytic oxidation reaction

Tuning an oxide/metal interface is of critical importance for the performance enhancement of many heterogeneous catalytic reactions. However, catalytic oxidation occurring at the interface between non-reducible oxide and metal has been challenging, since non-reducible oxides hardly lose their lattice oxygen (O_L) or dissociate O₂ from the gas phase. In this work, a ZnO monolayer film on Au(111) is used as an inverse catalyst to investigate CO oxidation occurring at the ZnO/Au(111) interface via high pressure scanning tunneling microscopy. Surface science experiments indicate that oxygen intercalation under the ZnO monolayer film, termed ZnO/O/Au(111), can be achieved via a surface reaction with 1 × 10^-6 mbar O₃. Subsequent exposure of the formed ZnO/O/Au(111) surface to mbar CO at room temperature leads to the recovery of the pristine ZnO/Au(111) surface. Theoretical calculations reveal that O_L adjacent to intercalated oxygen (O_int) is activated due to the O_L-Zn-O_int bonding and surface corrugation, which can be directly involved in CO oxidation. Subsequently, O_int migrates to the formed oxygen vacancy from the subsurface resuming the pristine ZnO structure. These results thus reveal that oxygen intercalation underneath single-layer ZnO will strongly boost the oxidation reaction via activating adjacent lattice oxygen atoms.

Interface Chirality: From Biological Effects to Biomedical Applications

Chiral surface is a critical mediator that significantly impacts interaction with biological systems on regulating cell behavior. To better understand how the properties of interfacial Chirality affect cell behavior and address the limitations of chiral materials for biomedical applications, in this review, we mainly focus on the recent developments of chiral bio-interfaces for the controllable and accurate guidance of chiral biomedical phenomena. In particular, we will discuss how cells or organisms sense and respond to the chiral stimulus, as well as the chirality mediating cell fate, tissue repair, and organism immune response will be reviewed. In addition, the biological applications of chirality, such as drug delivery, antibacterial, antivirus and antitumor activities, and biological signal detection, will also be reviewed. Finally, the challenges of chiral bio-interfaces for controlling biological response and the further application of interface chirality materials for biomedical will be discussed.

Recent advances in in-situ transmission electron microscopy techniques for heterogeneous catalysis

The process of heterogeneous catalytic reaction under working conditions has long been considered a "black box", which is mainly because of the difficulties in directly characterizing the structural changes of catalysts at the atomic level during catalytic reactions. The development of in situ transmission electron microscopy (TEM) techniques offers opportunities for introducing a realistic chemical reaction environment in TEM, making it possible to uncover the mystery of catalytic reactions. In this article, we present a comprehensive overview of the application of in situ TEM techniques in heterogeneous catalysis, highlighting its utility for observing gas-solid and liquid-solid reactions during thermal catalysis, electrocatalysis, and photocatalysis. in situ TEM has a unique advantage in revealing the complex structural changes of catalysts during chemical reactions. Revealing the real-time dynamic structure during reaction processes is crucial for understanding the intricate relationship between catalyst structure and its catalytic performance. Finally, we present a perspective on the future challenges and opportunities of in situ TEM in heterogeneous catalysis.

Three-dimensional inhomogeneity of zeolite structure and composition revealed by electron ptychography

Structural and compositional inhomogeneity is common in zeolites and considerably affects their properties. Thickness-limited lateral resolution, lack of depth resolution, and electron dose-constrained focusing limit local structural studies of zeolites in conventional transmission electron microscopy (TEM). We demonstrate that a multislice ptychography method based on four-dimensional scanning TEM (4D-STEM) data can overcome these limitations. Images obtained from a ~40-nanometer-thick MFI zeolite exhibited a lateral resolution of ~0.85 angstrom that enabled the identification of individual framework oxygen (O) atoms and the precise determination of the orientations of adsorbed molecules. Furthermore, a depth resolution of ~6.6 nanometers allowed probing of the three-dimensional distribution of O vacancies, as well as the phase boundaries in intergrown MFI and MEL zeolites. The 4D-STEM ptychography can be generally applied to other materials with similar high electron-beam sensitivity.

Atom-stepped surface-regulated Pd nanowires for boosting alcohol oxidation activity

A highly active surface can endow the electrocatalysts with extraordinary catalytic performances. However, it remains challenging to tailor the atomic packing characteristics and thus the physical and chemical characteristics of the electrocatalysts. Herein, penta-twinned Pd nanowires (NWs) with abundant high-energy atomic steps (i.e., stepped Pd) are synthesized by seeded synthesis on Pd NWs enclosed by (100) facets. Benefiting from the catalytically active atomic steps, such as [n(100) × m(111)] on the surface, the resultant stepped Pd NWs can work as an effective electrocatalyst for the ethanol oxidation reaction (EOR) and ethylene glycol oxidation reaction (EGOR), which are essential anode reactions in direct alcohol fuel cells (DAFCs). Compared with commercial Pd/C, the Pd nanowires bound by (100) facets and atomic steps both display enhanced catalytic activity and stability towards the EOR and EGOR. Importantly, the mass activities of the stepped Pd NWs toward the EOR and EGOR are 6.38 and 7.98 A mg_Pd^-1, which are 3.1 and 2.6 times those of Pd NWs enclosed by (100) facets, respectively. Besides, our synthetic strategy also enables the formation of bimetallic Pd-Cu nanowires with abundant atomic steps. This work not only demonstrates a simple yet effective strategy to obtain mono- or bi-metallic nanowires with abundant atomic steps, but also highlights the significant role of atomic steps for boosting the activity of electrocatalysts.

Epitaxial growth of highly symmetrical branched noble metal-semiconductor heterostructures with efficient plasmon-induced hot-electron transfer

Epitaxial growth is one of the most commonly used strategies to precisely tailor heterostructures with well-defined compositions, morphologies, crystal phases, and interfaces for various applications. However, as epitaxial growth requires a small interfacial lattice mismatch between the components, it remains a challenge for the epitaxial synthesis of heterostructures constructed by materials with large lattice mismatch and/or different chemical bonding, especially the noble metal-semiconductor heterostructures. Here, we develop a noble metal-seeded epitaxial growth strategy to prepare highly symmetrical noble metal-semiconductor branched heterostructures with desired spatial configurations, i.e., twenty CdS (or CdSe) nanorods epitaxially grown on twenty exposed (111) facets of Ag icosahedral nanocrystal, albeit a large lattice mismatch (more than 40%). Importantly, a high quantum yield (QY) of plasmon-induced hot-electron transferred from Ag to CdS was observed in epitaxial Ag-CdS icosapods (18.1%). This work demonstrates that epitaxial growth can be achieved in heterostructures composed of materials with large lattice mismatches. The constructed epitaxial noble metal-semiconductor interfaces could be an ideal platform for investigating the role of interfaces in various physicochemical processes.

In situ TEM investigation of nucleation and crystallization of hybrid bismuth nanodiamonds

Despite great progress in the non-classical homogeneous nucleation and crystallization theory, the heterogeneous processes of atomic nucleation and crystallization remain poorly understood. Abundant theories and experiments have demonstrated the detailed dynamics of homogeneous nucleation; however, intensive dynamic investigations on heterogeneous nucleation are still rare. In this work, in situ transmission electron microscopy (TEM) at the atomic scale was carried out with temporal resolution for heterogeneous nucleation and crystallization. The results show a reversible amorphous to crystal phase transformation that is manipulated by the size threshold effect. Moreover, the two growth pathways of Bi particles can be mainly assigned to the atomic adsorption expansion in the amorphous state and effective fusion in the crystal contact process. These interesting findings, based on a real dynamic imaging system, strongly enrich and improve our understanding of the dynamic mechanisms in the non-classical heterogeneous nucleation and crystallization theory, providing insights into designing innovative materials with controlled microstructures and desired physicochemical properties.

Insights into the Synthesis Mechanisms of Ag-Cu3P-GaP Multicomponent Nanoparticles

Metal-semiconductor nanoparticle heterostructures are exciting materials for photocatalytic applications. Phase and facet engineering are critical for designing highly efficient catalysts. Therefore, understanding processes occurring during the nanostructure synthesis is crucial to gain control over properties such as the surface and interface facets' orientations, morphology, and crystal structure. However, the characterization of nanostructures after the synthesis makes clarifying their formation mechanisms nontrivial and sometimes even impossible. In this study, we used an environmental transmission electron microscope with an integrated metal-organic chemical vapor deposition system to enlighten fundamental dynamic processes during the Ag-Cu3P-GaP nanoparticle synthesis using Ag-Cu3P seed particles. Our results reveal that the GaP phase nucleated at the Cu3P surface, and growth proceeded via a topotactic reaction involving counter-diffusion of Cu+ and Ga3+ cations. After the initial GaP growth steps, the Ag and Cu3P phases formed specific interfaces with the GaP growth front. GaP growth proceeded by a similar mechanism observed for the nucleation involving the diffusion of Cu atoms through/along the Ag phase toward other regions, followed by the redeposition of Cu3P at a specific Cu3P crystal facet, not in contact with the GaP phase. The Ag phase was essential for this process by acting as a medium enabling the efficient transport of Cu atoms away from and, simultaneously, Ga atoms toward the GaP-Cu3P interface. This study shows that enlightening fundamental processes is critical for progress in synthesizing phase- and facet-engineered multicomponent nanoparticles with tailored properties for specific applications, including catalysis.