Determinants of crystal structure transformation of ionic nanocrystals in cation exchange reactions

Efficient Defect-Driven Cation Exchange beyond the Nanoscale Semiconductors toward Antibacterial Functionalization

Defect engineering is an exciting tool for customizing semiconductors' structural and optoelectronic properties. Elaborating programmable methodologies to circumvent energy constraints in multievent inversions expands our understanding of the mechanisms governing the functionalization of nanomaterials. Herein, we introduce a novel strategy based on defect incorporation and solution rationalization, which triggers energetically unfavorable cation exchange reactions in extended solids. Using Sb2X3 + Ag (I) → Ag: Sb2X3 (X= S, Se) as a system to model, we demonstrate that incorporating chalcogen vacancies and AgSbVX complex defects into initial thin films (TFs) is crucial for activating long-range solid-state ion diffusion. Additional regulation of the Lewis acidity of auxiliary chemicals provides an exceptional conversion yield of the Ag precursor into a solid-state product up to 90%, simultaneously transforming upper matrix layers into AgSbX2. The proposed strategy enables tailoring radiative recombination processes, offers efficiency to invert TFs at moderate temperatures quickly, and yields structures of large areas with substantial antibacterial activity in visible light for a particular inversion system. Similar customization can be applied to most sulfides/selenides with controlled reaction yields.

Kirkendall Effect-Driven Reversible Chemical Transformation for Reconfigurable Nanocrystals

The potential universality of chemical transformation principles makes it a powerful tool for nanocrystal (NC) synthesis. An example is the nanoscale Kirkendall effect, which serves as a guideline for the construction of hollow structures with different properties compared to their solid counterparts. However, even this general process is still limited in material scope, structural complexity, and, in particular, transformations beyond the conventional solid-to-hollow process. We demonstrate in this work an extension of the Kirkendall effect that drives reversible structural and phase transformations between metastable metal chalcogenides (MCs) and metal phosphides (MPs). Starting from Ni3S4/Cu1.94S NCs as the initial frameworks, ligand-regulated sequential extractions and diffusion of host/guest (S2-/P3-) anions between Ni3S4/Cu1.94S and Ni2P/Cu3P phases enable solid-to-hollow-to-solid structural motif evolution while retaining the overall morphology of the NC. An in-depth mechanistic study reveals that the transformation between metastable MCs and MPs occurs through a combination of ligand-dependent kinetic control and anion mixing-induced thermodynamic control. This strategy provides a robust platform for creating a library of reconfigurable NCs with tunable compositions, structures, and interfaces.

Revealing Anion Exchange in Two-Dimensional Nanocrystals

Ion exchange is a powerful postsynthesis tool for the design of functional nanomaterials. However, achieving anion exchange while maintaining the original morphology and crystal structure, as well as elucidating the mechanism, remains challenging. Here, we developed an anion-exchange strategy under mild conditions and revealed an unusual ion-exchange mechanism in the semiconductor nanoplatelets. Kinetic studies have demonstrated that the transformation follows first-order kinetics, with the ligand restricting the guest anion from diffusing only in one-dimensional directions. By monitoring the reaction process, we demonstrated that the anion exchange reaction occurs selectively on the polar surface of the NPLs and exhibits asymmetry at the two polar end faces. Theoretical simulations further confirmed that anion exchange began from the chalcogenide-dominated facet. The thermodynamic data suggest that guest ions diffuse into the crystal interior via a direct exchange mechanism. This study provides a pathway for anion exchange and the construction of functional nanocrystals and a platform for studying the optoelectronic behavior of single-sheet heterojunctions.

Tutorial on Describing, Classifying, and Visualizing Common Crystal Structures in Nanoscale Materials Systems

Crystal structures underpin many aspects of nanoscience and technology, from the arrangements of atoms in nanoscale materials to the ways in which nanoscale materials form and grow to the structures formed when nanoscale materials interact with each other and assemble. The impacts of crystal structures and their relationships to one another in nanoscale materials systems are vast. This Tutorial provides nanoscience researchers with highlights of many crystal structures that are commonly observed in nanoscale materials systems, as well as an overview of the tools and concepts that help to derive, describe, visualize, and rationalize key structural features. The scope of materials focuses on the elements and their compounds that are most frequently encountered as nanoscale materials, including both close-packed and nonclose-packed structures. Examples include three-dimensionally and two-dimensionally bonded compounds related to the rocksalt, nickel arsenide, fluorite, zincblende, wurtzite, cesium chloride, and perovskite structures, as well as layered perovskites, intergrowth compounds, MXenes, transition metal dichalcogenides, and other layered materials. Ordered versus disordered structures, high entropy materials, and instructive examples of more complex structures, including copper sulfides, are also discussed to demonstrate how structural visualization tools can be applied. The overall emphasis of this Tutorial is on the ways in which complex structures are derived from simpler building blocks, as well as the similarities and interrelationships among certain classes of structures that, at first glance, may be interpreted as being very different. Identifying and appreciating these structural relationships is useful to nanoscience researchers, as it allows them to deconstruct complex structures into simpler components, which is important for designing, understanding, and using nanoscale materials.

Kinetically controlled morphology and composition of colloidal nanoparticles: cation exchange reactions from copper sulfide to transition metal (Mn, Zn, Fe, and Co) sulfides

The cation exchange reaction is a powerful method for generating nanomaterials with unique structures because of the easy control of the size, morphology, composition, and crystal structure of the nanoparticles. This study investigated the kinetically controlled morphology and composition of colloidal nanoparticles (NPs) through cation exchange reactions, specifically focusing on variations from copper sulfide to transition metal sulfides, including Co, Fe, Zn, and Mn sulfides. In the cation exchange reaction, Co exhibited the fastest exchange rate, followed by Fe, Mn, and Zn. The difference in kinetics rates affected the change in morphology; Co, with the fastest rate, was immediately and uniformly distributed in the NPs. For Fe, a sandwich structure was initially formed and this gradually transformed into a solid-solution phase. After exchanging Cu with Mn and Zn, a heterostructure was formed, which became increasingly clear as the reaction progressed. The transformation of the morphology and crystal structure were confirmed using XRD, TEM, and SEM analyses. The findings of this study suggest that the morphology and distinct structures of the exchanged particles can be controlled by manipulating the kinetics rates of cations through cation exchange reactions. This process offers a powerful tool for the tailored synthesis of colloidal nanoparticles and provides a design principle for enabling predictable outcomes through cation exchange reactions.

Molybdenum Disulfide Induced Phase Control Synthesis of Multi-dimensional Co3S4-MoS2 Heteronanostructures via Cation Exchange

Phase control over cation exchange (CE) reactions has emerged as an important approach for the synthesis of nanomaterials (NMs), enabling precise determination of their reactivity and properties. Although factors such as crystal structure and morphology have been studied for the phase engineering of CE reactions in NMs, there remains a lack of systematic investigation to reveal the impact for the factors in heterogeneous materials. Herein, we report a molybdenum disulfide induced phase control method for synthesizing multidimensional Co3S4-MoS2 heteronanostructures (HNs) via cation exchange. MoS2 in parent Cu1.94S-MoS2 HNs are proved to affect the thermodynamics and kinetics of CE reactions, and facilitate the formation of Co3S4-MoS2 HNs with controlled phase. This MoS2 induced phase control method can be extended to other parent HNs with multiple dimensions, which shows its diversity. Further, theoretical calculations demonstrate that Co3S4 (111)/MoS2 (001) exhibits a higher adhesion work, providing further evidence that MoS2 enables phase control in the HNs CE reactions, inducing the generation of novel Co3S4-MoS2 HNs. As a proof-of-concept application for crystal phase- and dimensionality-dependent of cobalt sulfide based HNs, the obtained Co3S4-MoS2 heteronanoplates (HNPls) show remarkable performance in hydrogen evolution reactions (HER) under alkaline media. This synthetic methodology provides a unique design strategy to control the crystal structure and fills the gap in the study of heterogeneous materials on CE reaction over phase engineering that are otherwise inaccessible.

Nanomaterials Research at a Primarily Undergraduate Institution: Transforming Nanorods, Undergraduate Research Communities, and Infrastructure

Undergraduate research transforms student's conceptions of themselves as scientists and encourages participation and retention in science, technology, engineering, and mathematics (STEM) fields. Many barriers exist to carrying out scientifically impactful undergraduate research in nanomaterials at primarily undergraduate institutions (PUIs). Here, we share several practices and design principles that demonstrate pathways to overcome these barriers. Design of modular research projects with low entry barriers is essential. Postsynthetic transformation of nanoparticles is a field that enables such design and has been used successfully to advance nanoscience research while being achievable within undergraduate laboratories. Relatively large, inclusive research communities can be supported through the creation of opportunities with peer- and near-peer mentoring. We also share emerging strategies for enabling routine undergraduate access to transmission electron microscopy, which is one of the most mainstream characterization techniques in nanoscience yet is frequently absent from the infrastructure at undergraduate-focused institutions.

Shape-controlled synthesis of micro-/nanosized Cu particles with spherical and polyhedral shapes using the polyol process

This study reports the synthesis of Cu micro-/nanosized particles through the polyol process. Cu particles were synthesized by reducing copper(ii) chloride in ethylene glycol (EG), polyvinylpyrrolidone (PVP), and potassium bromide (KBr) at low temperatures with or without the use of sodium borohydride (NaBH4).

Uncovering the predictive pathways of lithium and sodium interchange in layered oxides

Ion exchange is a powerful method to access metastable materials with advanced functionalities for energy storage applications. However, high concentrations and unfavourably large excesses of lithium are always used for synthesizing lithium cathodes from parent sodium material, and the reaction pathways remain elusive. Here, using layered oxides as model materials, we demonstrate that vacancy level and its corresponding lithium preference are critical in determining the accessible and inaccessible ion exchange pathways. Taking advantage of the strong lithium preference at the right vacancy level, we establish predictive compositional and structural evolution at extremely dilute and low excess lithium based on the phase equilibrium between Li0.94CoO2 and Na0.48CoO2. Such phase separation behaviour is general in both surface reaction-limited and diffusion-limited exchange conditions and is accomplished with the charge redistribution on transition metals. Guided by this understanding, we demonstrate the synthesis of NayCoO2 from the parent LixCoO2 and the synthesis of Li0.94CoO2 from NayCoO2 at 1-1,000 Li/Na (molar ratio) with an electrochemical assisted ion exchange method by mitigating the kinetic barriers. Our study opens new opportunities for ion exchange in predictive synthesis and separation applications.

Remnant Copper Cation-Assisted Atom Mixing in Multicomponent Nanoparticles

Nanostructured high-/medium-entropy compounds have emerged as important catalytic materials for energy conversion technologies, but complex thermodynamic relationships involved with the element mixing enthalpy have been a considerable roadblock to the formation of stable single-phase structures. Cation exchange reactions (CERs), in particular with copper sulfide templates, have been extensively investigated for the synthesis of multicomponent heteronanoparticles with unconventional structural features. Because copper cations within the host copper sulfide templates are stoichiometrically released with incoming foreign cations in CERs to maintain the overall charge balance, the complete absence of Cu cations in the nanocrystals after initial CERs would mean that further compositional variation would not be possible by subsequent CERs. Herin, we successfully retained a portion of Cu cations within the silver sulfide (Ag2S) and gold sulfide (Au2S) phases of Janus Cu2-xS-M2S (M = Ag, Au) nanocrystals after the CERs, by partially suppressing the transformation of the anion sublattice that inevitably occurs during the introduction of external cations. Interestingly, the subsequent CERs on Janus Cu1.81S-M2S (M = Ag, Au), by utilizing the remnant Cu cations, allowed the construction of Janus Cu1.81S-AgxAuyS, which preserved the initial heterointerface. The synthetic strategy described in this work to suppress the complete removal of the Cu cation from the template could fabricate the CER-driven heterostructures with greatly diversified compositions, which exhibit unusual optical and catalytic properties.

Waning-and-waxing shape changes in ionic nanoplates upon cation exchange

Flexible control of the composition and morphology of nanocrystals (NCs) over a wide range is an essential technology for the creation of functional nanomaterials. Cation exchange (CE) is a facile method by which to finely tune the compositions of ionic NCs, providing an opportunity to obtain complex nanostructures that are difficult to form using conventional chemical synthesis procedures. However, due to their robust anion frameworks, CE cannot typically be used to modify the original morphology of the host NCs. In this study, we report an anisotropic morphological transformation of Cu1.8S NCs during CE. Upon partial CE of Cu1.8S nanoplates (NPLs) with Mn2+, the hexagonal NPLs are transformed into crescent-shaped Cu1.8S-MnS NPLs. Upon further CE, these crescent-shaped NPLs evolve back into completely hexagonal MnS NPLs. Comprehensive characterization of the intermediates reveals that this waxing-and-waning shape-evolution process is due to dissolution, redeposition, and intraparticle migration of Cu+ and S2-. Furthermore, in addition to Mn2+, this CE-induced transformation process occurs with Zn2+, Cd2+ and Fe3+. This finding presents a strategy by which to create heterostructured NCs with various morphologies and compositions under mild conditions.

Fibration of powdery materials

Non-destructive processing of powders into macroscopic materials with a wealth of structural and functional possibilities has immeasurable scientific significance and application value, yet remains a challenge using conventional processing techniques. Here we developed a universal fibration method, using two-dimensional cellulose as a mediator, to process diverse powdered materials into micro-/nanofibres, which provides structural support to the particles and preserves their own specialties and architectures. It is found that the self-shrinking force drives the two-dimensional cellulose and supported particles to pucker and roll into fibres, a gentle process that prevents agglomeration and structural damage of the powder particles. We demonstrate over 120 fibre samples involving various powder guests, including elements, compounds, organics and hybrids in different morphologies, densities and particle sizes. Customized fibres with an adjustable diameter and guest content can be easily constructed into high-performance macromaterials with various geometries, creating a library of building blocks for different fields of applications. Our fibration strategy provides a universal, powerful and non-destructive pathway bridging primary particles and macroapplications.

Stress-induced ordering evolution of 1D segmented heteronanostructures and their chemical post-transformations

Investigations of one-dimensional segmented heteronanostructures (1D-SHs) have recently attracted much attention due to their potentials for applications resulting from their structure and synergistic effects between compositions and interfaces. Unfortunately, developing a simple, versatile and controlled synthetic method to fabricate 1D-SHs is still a challenge. Here we demonstrate a stress-induced axial ordering mechanism to describe the synthesis of 1D-SHs by a general under-stoichiometric reaction strategy. Using the continuum phase-field simulations, we elaborate a three-stage evolution process of the regular segment alternations. This strategy, accompanied by easy chemical post-transformations, enables to synthesize 25 1D-SHs, including 17 nanowire-nanowire and 8 nanowire-nanotube nanostructures with 13 elements (Ag, Te, Cu, Pt, Pb, Cd, Sb, Se, Bi, Rh, Ir, Ru, Zn) involved. This ordering evolution-driven synthesis will help to investigate the ordering reconstruction and potential applications of 1D-SHs.

Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution

In recent years, low-dimensional transition metal chalcogenide (TMC) materials have garnered growing research attention due to their superior electronic, optical, and catalytic properties compared to their bulk counterparts. The controllable synthesis and manipulation of these materials are crucial for tailoring their properties and unlocking their full potential in various applications. In this context, the atomic substitution method has emerged as a favorable approach. It involves the replacement of specific atoms within TMC structures with other elements and possesses the capability to regulate the compositions finely, crystal structures, and inherent properties of the resulting materials. In this review, we present a comprehensive overview on various strategies of atomic substitution employed in the synthesis of zero-dimensional, one-dimensional and two-dimensional TMC materials. The effects of substituting elements, substitution ratios, and substitution positions on the structures and morphologies of resulting material are discussed. The enhanced electrocatalytic performance and photovoltaic properties of the obtained materials are also provided, emphasizing the role of atomic substitution in achieving these advancements. Finally, challenges and future prospects in the field of atomic substitution for fabricating low-dimensional TMC materials are summarized.

An artificial protein modulator reprogramming neuronal protein functions

Reversible protein phosphorylation, regulated by protein phosphatases, fine-tunes target protein function and plays a vital role in biological processes. Dysregulation of this process leads to aberrant post-translational modifications (PTMs) and contributes to disease development. Despite the widespread use of artificial catalysts as enzyme mimetics, their direct modulation of proteins remains largely unexplored. To address this gap and enable the reversal of aberrant PTMs for disease therapy, we present the development of artificial protein modulators (APROMs). Through atomic-level engineering of heterogeneous catalysts with asymmetric catalytic centers, these modulators bear structural similarities to protein phosphatases and exhibit remarkable ability to destabilize the bridging μ3-hydroxide. This activation of catalytic centers enables spontaneous hydrolysis of phospho-substrates, providing precise control over PTMs. Notably, APROMs, with protein phosphatase-like characteristics, catalytically reprogram the biological function of α-synuclein by directly hydrolyzing hyperphosphorylated α-synuclein. Consequently, synaptic function is reinforced in Parkinson's disease. Our findings offer a promising avenue for reprogramming protein function through de novo PTMs strategy.

Pre-phase transition of a Cu2-xS template enables polymorph selective synthesis of MS (M = Zn, Cd, Mn) nanocrystals via cation exchange reactions

Utilization of copper-deficient Cu2-xS nanocrystals (NCs) with diverse crystal phases and stoichiometries as cation exchange (CE) templates is a potential route to overcome the current limitations in the polymorph selective synthesis of desired nanomaterials. Among the Cu2-xS NCs, covellite CuS is emerging as an attractive CE template to produce complicated and metastable metal sulfide NCs. The presence of a reducing agent is essential to induce a phase transition of CuS into other Cu2-xS phases prior to the CE reactions. Nevertheless, the effect of the reducing agent on the phase transition of CuS, especially into the hexagonal close packing (hcp) phase and the cubic close packing (ccp) phase, has been scarcely exploited, but it is highly important for the polymorphic production of metal sulfides with the wurtzite phase and zinc blende phase. Herein, we report a reducing agent dependent pre-phase transition of CuS nanodisks (NDs) into hcp and ccp Cu2-xS NCs. 1-Dodecanethiol molecules and oleylamine molecules selectively reduced CuS NDs into hcp djurleite Cu1.94S NDs and ccp digenite Cu1.8S NCs. Afterward, the hcp Cu1.94S NDs and ccp Cu1.8S NCs were exchanged by Zn2+/Cd2+/Mn2+, and the wurtzite phase and the zinc blende phase of ZnS, CdS, and MnS NCs were produced. Without the pre-phase transition, direct CE reactions of CuS NDs are incapable of synthesizing the above wurtzite and zinc blende metal sulfide NCs. Therefore, our findings suggest the importance of the pre-phase transition of the CE template in polymorphic syntheses, holding great promise in the fabrication of other polymorphic nanomaterials with novel physical and chemical properties.

Metal nitrides for seawater electrolysis

Electrocatalytic high-throughput seawater electrolysis for hydrogen production is a promising green energy technology that offers possibilities for environmental and energy sustainability. However, large-scale application is limited by the complex composition of seawater, high concentration of Cl- leading to competing reaction, and severe corrosion of electrode materials. In recent years, extensive research has been conducted to address these challenges. Metal nitrides (MNs) with excellent chemical stability and catalytic properties have emerged as ideal electrocatalyst candidates. This review presents the electrode reactions and basic parameters of the seawater splitting process, and summarizes the types and selection principles of conductive substrates with critical analysis of the design principles for seawater electrocatalysts. The focus is on discussing the properties, synthesis, and design strategies of MN-based electrocatalysts. Finally, we provide an outlook for the future development of MNs in the high-throughput seawater electrolysis field and highlight key issues that require further research and optimization.

Covalent inorganic complexes enabled zinc blende to wurtzite phase changes in CdSe nanoplatelets

Phase changes in colloidal semiconductor nanocrystals (NCs) are essential in material design and device applications. However, the transition pathways have yet to be sufficiently studied, and a better understanding of the underlying mechanisms is needed. In this work, a complete ligand-assisted phase transition from zinc blende (ZB) to wurtzite (WZ) is observed in CdSe nanoplatelets (NPLs). By monitoring with in situ absorption spectra along with electrospray ionization mass spectrometry (ESI-MS), we demonstrated that the transition process is a ligand-assisted covalent inorganic complex (CIC)-mediated phase transition pathway, which involves three steps, ligand exchange on ZB CdSe NPLs (Step 1), dissolution of NPLs to form CICs (Step 2), and conversion of CdSe-CIC assemblies to WZ CdSe NPLs (Step 3). In particular, CICs can be directly anisotropically grown to WZ CdSe NPL without other intermediates, following pseudo-first-order kinetics (kobs = 9.17 × 10-5 s-1). Furthermore, we demonstrated that CICs are also present and play an essential role in the phase transition of ZnS NPLs from WZ to ZB structure. This study proposes a new crystal transformation pathway and elucidates a general phase-transition mechanism, facilitating precise functional nanomaterial design.

Recent Progress on Phase Engineering of Nanomaterials

As a key structural parameter, phase depicts the arrangement of atoms in materials. Normally, a nanomaterial exists in its thermodynamically stable crystal phase. With the development of nanotechnology, nanomaterials with unconventional crystal phases, which rarely exist in their bulk counterparts, or amorphous phase have been prepared using carefully controlled reaction conditions. Together these methods are beginning to enable phase engineering of nanomaterials (PEN), i.e., the synthesis of nanomaterials with unconventional phases and the transformation between different phases, to obtain desired properties and functions. This Review summarizes the research progress in the field of PEN. First, we present representative strategies for the direct synthesis of unconventional phases and modulation of phase transformation in diverse kinds of nanomaterials. We cover the synthesis of nanomaterials ranging from metal nanostructures such as Au, Ag, Cu, Pd, and Ru, and their alloys; metal oxides, borides, and carbides; to transition metal dichalcogenides (TMDs) and 2D layered materials. We review synthesis and growth methods ranging from wet-chemical reduction and seed-mediated epitaxial growth to chemical vapor deposition (CVD), high pressure phase transformation, and electron and ion-beam irradiation. After that, we summarize the significant influence of phase on the various properties of unconventional-phase nanomaterials. We also discuss the potential applications of the developed unconventional-phase nanomaterials in different areas including catalysis, electrochemical energy storage (batteries and supercapacitors), solar cells, optoelectronics, and sensing. Finally, we discuss existing challenges and future research directions in PEN.

Amorphization-Induced Cation Exchange in Indium Oxide Nanosheets for CO2-to-Ethanol Conversion

Cation exchange (CE) in metal oxides under mild conditions remains an imperative yet challenging goal to tailor their composition and enable practical applications. Herein, we first develop an amorphization-induced strategy to achieve room-temperature CE for universally synthesizing single-atom doped In2O3 nanosheets (NSs). Density functional theory (DFT) calculations elucidate that the abundant coordination-unsaturated sites present in a-In2O3 NSs are instrumental in surmounting the energy barriers of CE reactions. Empirically, a-In2O3 NSs as the host materials successfully undergo exchange with unary cations (Cu2+, Co2+, Mn2+, Ni2+), binary cations (Co2+Mn2+, Co2+Ni2+, Mn2+Ni2+), and ternary cations (Co2+Mn2+Ni2+). Impressively, high-loading single-atom doped (over 10 atom %) In2O3 NSs were obtained. Additionally, Cu/a-In2O3 NSs exhibit an excellent ethanol yield (798.7 μmol g-1 h-1) with a high selectivity of 99.5% for the CO2 photoreduction. This work offers a new approach to induce CE reactions in metal oxides under mild conditions and constructs scalable single-atom doped catalysts for critical applications.

Versatile synthesis of nano-icosapods via cation exchange for effective photocatalytic conversion of biomass-relevant alcohols

Branched metal chalcogenide nanostructures with well-defined composition and configuration are appealing photocatalysts for solar-driven organic transformations. However, precise design and controlled synthesis of such nanostructures still remain a great challenge. Herein, we report the construction of a variety of highly symmetrical metal sulfides and heterostructured icosapods based on them, in which twenty branches were radially grown in spatially ordered arrangement, with a high degree of structure homogeneity. Impressively, the as-obtained CdS-PdxS icosapods manifest a significantly improved photocatalytic activity for the selective oxidation of biomass-relevant alcohols into corresponding aldehydes coupled with H2 evolution under visible-light irradiation (>420 nm), and the apparent quantum yield of the benzyl alcohol reforming can be achieved as high as 31.4% at 420 nm. The photoreforming process over the CdS-PdxS icosapods is found to be directly triggered by the photogenerated electrons and holes without participation of radicals. The enhanced photocatalytic performance is attributed to the fast charge separation and abundant active sites originating from the well-defined configuration and spatial organization of the components in the branched heterostructures.

Thermally Promoted Cation Exchange at the Solid State in the Transmission Electron Microscope: How It Actually Works

Cation exchange offers a strong postsynthetic tool for nanoparticles that are unachievable via direct synthesis, but its velocity makes observing the onset of the reaction in the liquid state almost impossible. After successfully proving that cation exchange reactions can be triggered, performed, and followed live at the solid state by an in situ transmission electron microscopy approach, we studied the deep mechanisms ruling the onset of cation exchange reactions, i.e., the adsorption, penetration, and diffusion of cations in the host matrices of two crystal phases of CdSe. Exploiting an in situ scanning transmission electron microscopy approach with a latest generation heating holder, we were able to trigger, freeze, and image the initial stages of cation exchange with much higher detail. Also, we found a connection between the crystal structure of CdSe, the starting temperature, and the route of the cation exchange reaction. All the experimental results were further reviewed by molecular dynamics simulations of the whole cation exchange reaction divided in subsequent steps. The simulations highlighted how the cation exchange mechanism and the activation energies change with the host crystal structures. Furthermore, the simulative results strongly corroborated the activation temperatures and the cation exchange rates obtained experimentally, providing a deeper understanding of its phenomenology and mechanism at the atomic scale.

MXene-Regulated Metal-Oxide Interfaces with Modified Intermediate Configurations Realizing Nearly 100% CO2 Electrocatalytic Conversion

Electrocatalytic CO2 reduction via renewable electricity provides a sustainable way to produce valued chemicals, while it suffers from low activity and selectivity. Herein, we constructed a novel catalyst with unique Ti3 C2 Tx MXene-regulated Ag-ZnO interfaces, undercoordinated surface sites, as well as mesoporous nanostructures. The designed Ag-ZnO/Ti3 C2 Tx catalyst achieves an outstanding CO2 conversion performance of a nearly 100% CO Faraday efficiency with high partial current density of 22.59 mA cm-2 at -0.87 V versus reversible hydrogen electrode. The electronic donation of Ag and up-shifted d-band center relative to Fermi level within MXene-regulated Ag-ZnO interfaces contributes the high selectivity of CO. The CO2 conversion is highly correlated with the dominated linear-bonded CO intermediate confirmed by in situ infrared spectroscopy. This work enlightens the rational design of unique metal-oxide interfaces with the regulation of MXene for high-performance electrocatalysis beyond CO2 reduction.

Unexpected Multi-Step Transformation of AgCuS to AgAuS During Nanoparticle Cation Exchange

Cation exchange reactions can modify the compositions of colloidal nanoparticles, providing easy access to compounds or nanoparticles that may not be accessible directly. The most common nanoparticle cation exchange reactions replace monovalent cations with divalent cations or vice versa, but some monovalent-to-monovalent exchanges have been reported. Here, we dissect the reaction of as-synthesized AgCuS nanocrystals with Au+ to form AgAuS, initially hypothesizing that Au+ could be selective for Cu+ (rather than for Ag+) based on a known Au+-for-Cu+ exchange and the stability of the targeted AgAuS product. Unexpectedly, we found this system and the putative cation exchange reaction to be much more complex than anticipated. First, the starting AgCuS nanoparticles, which match literature reports, are more accurately described as a hybrid of Ag and a variant of AgCuS that is structurally related to mckinstryite Ag5Cu3S4. Second, the initial reaction of Ag-AgCuS with Au+ results in a galvanic replacement to transform the Ag component to a AuyAg1-y alloy. Third, continued reaction with Au+ initiates cation exchange with Cu+ in AuyAg1-y-AgCuS to form AuyAg1-y-Ag3CuxAu1-xS2 and then AuyAg1-y-AgAuS, which is the final product. Crystal structure relationships among mckinstryite-type AgCuS, Ag3CuxAu1-xS2, and AgAuS help to rationalize the transformation pathway. These insights into the reaction of AgCuS with Au+ reveal the potential complexity of seemingly simple nanoparticle reactions and highlight the importance of thorough compositional, structural, and morphological characterization before, during, and after such reactions.

Quantifiable Regulation of Chemical Kinetics Barriers for Creation of Single-Atom Metal Sites on Photocatalytic Atomic Layers

Cation exchange (CE) under mild conditions promises a facile strategy to anchor single metal sites on colloidal chalcogenides toward catalytic applications, which however has seldom been demonstrated. The dilemma behind this is the rapid kinetics and high efficiency of the reaction disfavoring atomic dispersion of the metal species. Here we report that a fine-tuning of the affinity between the incoming metal cations and the deliberately introduced ligands can be exploited to manipulate the kinetics of the CE reaction, in a quantitative and systematic manner defined by the Tolman electronic parameter of the ligands used. Moreover, the steric effect of metal-ligand complexes offers thermodynamic preference for spatial isolation of the metal atoms. These thereby allow the rational construction of single atom catalysts (SACs) via simple one-step CE reactions, as exemplified by the CE-derived incorporation of single metal atoms (M = Cu, Ag, Au, Pd) on SnS₂ two-unit-cell layers through M-S coordination.

Formation and Transformation of Cu2-xSe1-yTey Nanoparticles Synthesized by Tellurium Anion Exchange of Copper Selenide

Ion exchange reactions of colloidal nanoparticles post-synthetically modify the composition while maintaining the morphology and crystal structure and therefore are important for tuning properties and producing otherwise inaccessible and/or metastable materials. Reactions involving anion exchange of metal chalcogenides are particularly interesting, as they involve the replacement of the sublattice that defines the structure while also requiring high temperatures that can be disruptive. Here, we show that the tellurium anion exchange of weissite Cu_2-xSe nanoparticles using a trioctylphosphine-tellurium complex (TOP═Te) yields weissite Cu_2-xSe_1-yTe_y solid solutions, rather than complete exchange to weissite Cu_2-xTe, with compositions that are tunable based on the amount of TOP═Te used. Upon storage at room temperature in either solvent or air, tellurium-rich Cu_2-xSe_1-yTe_y solid solution nanoparticles transform, over the span of several days, to a selenium-rich Cu_2-xSe_1-yTe_y composition. The tellurium that is expelled from the solid solution during this process migrates to the surface and forms a tellurium oxide shell, which correlates with the onset of particle agglomeration due to the change in surface chemistry. Collectively, this study demonstrates tunable composition during tellurium anion exchange of copper selenide nanoparticles along with unusual post-exchange reactivity that transforms the composition, surface chemistry, and colloidal dispersibility due to the apparent metastable nature of the solid solution product.

Tailoring Metal-Oxygen Bonds Boosts Oxygen Reaction Kinetics for High-Performance Zinc-Air Batteries

Metal-oxygen bonds significantly affect the oxygen reaction kinetics of metal oxide-based catalysts but still face the bottlenecks of limited cognition and insufficient regulation. Herein, we develop a unique strategy to accurately tailor metal-oxygen bond structure via amorphous/crystalline heterojunction realized by ion-exchange. Compared with pristine amorphous CoSnO_3-y, iron ion-exchange induced amorphous/crystalline structure strengthens the Sn-O bond, weakens the Co-O bond strength, and introduces additional Fe-O bond, accompanied by abundant cobalt defects and optimal oxygen defects with larger pore structure and specific surface area. The optimization of metal-oxygen bond structure is dominated by the introduction of crystal structure and further promoted by the introduction of Fe-O bond and rich Co defect. Remarkably, the Fe doped amorphous/crystalline catalyst (Co_1-xSnO_3-y-Fe_0.021-A/C) demonstrates excellent oxygen evolution reaction and oxygen reduction reaction activities with a smaller potential gap (ΔE = 0.687 V), and the Zn-air battery based with Co_1-xSnO_3-y-Fe_0.021-A/C exhibits excellent output power density, cycle performance, and flexibility.

Controllable Disordered Copper Sulfide with a Sulfur-Rich Interface for High-Performance Gaseous Elemental Mercury Capture

Copper sulfide (CuS) has received increasing attention as a promising material in gaseous elemental mercury (Hg⁰) capture, yet how to enhance its activity at elevated temperature remains a great challenge for practical application. Herein, simultaneous improvement in the activity and thermal stability of CuS toward Hg⁰ capture was successfully achieved for the first time by controlling the crystal growth. CuS with a moderate crystallinity degree of 68.8% showed a disordered structure yet high thermal stability up to 180 °C. Such disordered CuS can maintain its Hg⁰ capture activity stable during longtime test at a wide temperature range from 60 to 180 °C and displayed strong resistance to SO₂ (6%) and H₂O (8%). The significant improvement can be attributed to the synergistic effect of a moderately crystalline nature and a unique sulfur-rich interface. Moderate crystallinity guarantees the thermal stability of CuS and the presence of abundant defects, in which copper vacancy enhances significantly the Hg⁰ capture activity. The sulfur-rich interface enables CuS to provide plentiful highly active S_x^2- sites for Hg⁰ adsorption. The interrelation between structure, reactivity, and thermal stability clarified in this work broadens the understanding toward Hg⁰ oxidation and adsorption over CuS and provides new insights into the rational design and engineering of advanced environmental materials.

Diffusion-Limited Kinetics of Isovalent Cation Exchange in III-V Nanocrystals Dispersed in Molten Salt Reaction Media

The goal of this work is to determine the kinetic factors that govern isovalent cation exchange in III-V colloidal quantum dots using molten salts as the solvent and cation source. We focus on the reactions of InP + GaI₃→ In_1-xGa_xP and InAs + GaI₃→ In_1-xGa_xAs to create technologically important ternary III-V phases. We find that the molten salt reaction medium causes the transformation of nearly spherical InP nanocrystals to tetrahedron-shaped In_1-xGa_xP nanocrystals. Furthermore, we determine that the activation energy for the cation exchange reaction is 0.9 eV for incorporation of Ga into InP and 1.2 eV for incorporation of Ga into InAs, both much lower than the measured values in bulk semiconductors. Next, we use powder XRD simulations to constrain our understanding of the structure of the In_1-xGa_xP nanocrystals. Together our results reveal several important features of molten salt-mediated cation exchange and provide guidance for future development of these materials.

Solution-Mediated Inversion of SnSe to Sb2Se3 Thin-Films

New facile and controllable approaches to fabricating metal chalcogenide thin films with adjustable properties can significantly expand the scope of these materials in numerous optoelectronic and photovoltaic devices. Most traditional and especially wet-chemical synthetic pathways suffer from a sluggish ability to regulate the composition and have difficulty achieving the high-quality structural properties of the sought-after metal chalcogenides, especially at large 2D length scales. In this effort, and for the first time, we illustrated the fast and complete inversion of continuous SnSe thin-films to Sb₂Se₃ using a scalable top-down ion-exchange approach. Processing in dense solution systems yielded the formation of Sb₂Se₃ films with favorable structural characteristics, while oxide phases, which are typically present in most Sb₂Se₃ films regardless of the synthetic protocols used, were eliminated. Density functional theory (DFT) calculations performed on intermediate phases show strong relaxations of the atomic lattice due to the presence of substitutional and vacancy defects, which likely enhances the mobility of cationic species during cation exchange. Our concept can be applied to customize the properties of other metal chalcogenides or manufacture layered structures.

Manipulating Cation Exchange Reactions in Cu2-xS Nanoparticles via Crystal Structure Transformation

Copper-deficient Cu_2-xS nanoparticles (NPs) are extensively exploited as a superior cation exchange (CE) template to yield sophisticated nanostructures. Recently, it has been discovered that their CE reactions can be facilely manipulated by copper vacancy density, morphology, and NP size. However, the structural similarity of usually utilized Cu_2-xS somewhat limits the manipulation of the CE reactions through the factor of crystal structure because it can strongly influence the process of the reaction. Herein, we report a methodology of crystal structure transformation to manipulate the CE reactions. Particularly, roxbyite Cu_1.8S nanodisks (NDs) were converted into solid wurtzite CdS NDs and Janus-type Cu_1.94S/CdS NDs by a "full"/partial CE reaction with Cd²⁺. Afterward, the roxbyite Cu_1.8S were pseudomorphically transformed into covellite CuS NDs. Unlike Cu_1.8S, the CuS was scarcely exchanged because of the unique disulfide (S-S) bonds and converted into hollow wurtzite CdS under a more reactive condition. The S-S bonds were gradually split and CuS@CdS core@shell-type NDs were generated. Therefore, our findings in the present study provide not only a versatile technique to manipulate CE reactions in Cu_2-xS NPs but also a better comprehension of their reaction dynamics and pathways.

Orthogonal reactivity and interface-driven selectivity during cation exchange of heterostructured metal sulfide nanorods

We report predictive guidelines for the substoichiometric cation exchange of model two-component metal sulfide nanorods containing divalent cations of similar hardness. Unit cell volume changes, cation radii, solubility constants, and solid state interfaces influence selectivity during substoichiometric exchange of Cu⁺ when multiple products are possible.

Two-dimensional copper based colloidal nanocrystals: synthesis and applications

Two-dimensional (2D) semiconductor nanocrystals display unconventional physical and opto-electronic properties due to their ultrathin and unique electronic structures. Since the success of Cd-based photoemissive nanocrystals, the development of sustainable and low-cost nanocrystals with enhanced electronic and physical properties has become a central research theme. In this context, copper-based semiconductor 2D nanocrystals, the cost-effective and eco-friendly alternative, exhibit unique plasmonic resonance, transport properties, and high ionic conductivity beneficial for sensing, energy storage, conversion, and catalytic applications. This review summarizes recent progress in the colloidal synthesis, growth mechanisms, properties, and applications of 2D copper-based nanostructures with tunable compositions, dimensions, and crystal phases. We highlight the growth mechanisms concerning their shape evolution in two dimensions. We analyse the effectiveness of cation exchange as a tool to synthesize multinary nanocrystals. Based on the preparation of Cu-based chalcogenide and non-chalcogenide compositions, we discuss synthesis control achieved via colloidal approaches to allow dimension tunability, phase engineering, and plasmonic and thermoelectric property optimization. Furthermore, their potential in various applications of catalysis, energy storage, and sensing is reviewed. Finally, we address the current challenges associated with 2D Cu-based nanocrystal development and provide an outlook pertaining to unexplored research areas.

Crystal Structure Control of Binary and Ternary Solid-Solution Alloy Nanoparticles with a Face-Centered Cubic or Hexagonal Close-Packed Phase

The crystal structure significantly affects the physical and chemical properties of solids. However, the crystal structure-dependent properties of alloys are rarely studied because controlling the crystal structure of an alloy at the same composition is extremely difficult. Here, for the first time, we successfully demonstrate the synthesis of binary Ru-Pt (Ru/Pt = 7:3) and Ru-Ir (Ru/Ir = 7:3) and ternary Ru-Ir-Pt (Ru/Ir/Pt = 7:1.5:1.5) solid-solution alloy nanoparticles (NPs) with well-controlled hexagonal close-packed (hcp) and face-centered cubic (fcc) phases, through the chemical reduction method. The crystal structure control is realized by precisely tunning the reduction speeds of the metal precursors. The effect of the crystal structure on the catalytic performance of solid-solution alloy NPs is systematically investigated. Impressively, all the hcp alloy NPs show superior electrocatalytic activities for the hydrogen evolution reaction in alkaline solution compared with the fcc alloy NPs. In particular, hcp-RuIrPt exhibits extremely high intrinsic (mass) activity, which is 3.1 (3.2) and 6.7 (6.9) times enhanced compared to that of fcc-RuIrPt and commercial Pt/C.