Simple method for assaying colistin methanesulfonate in plasma and urine using high-performance liquid chromatography

Recent Trends in Therapeutic Drug Monitoring of Peptide Antibiotics

Antimicrobial peptides take a specific position in the field of antibiotics (ATBs), however, from a large number of available molecules only a few of them were approved and are used in clinics. These therapeutic modalities play a crucial role in the management of diseases caused by multidrug-resistant bacterial pathogens and represent the last-line therapy for bacterial infections. Therefore, there is a demand for a rationale use of such ATBs based on optimization of the dosing strategy to minimize the risk of resistance and ensure the sustainable efficacy of the drug in real clinical practice. Therapeutic drug monitoring, as a measurement of drug concentration in the body fluids or tissues, results in the optimization of the patient´s medication and therapy outcome. This strategy is beneficial and could result in tailored therapy for different types of infection and the prolongation of the use and efficacy of ATBs in hospitals. This review paper provides an actual overview of approved antimicrobial peptides used in clinical practice and covers current trends in their analysis by convenient and advanced methodologies used for their identification and/or quantitation in biological matrices for therapeutic drug monitoring purposes. Special emphasis is given to the methods with perspective clinical outcomes.

Full green assay of parenteral dosage forms of polymyxins utilizing xanthene dye: application to content uniformity testing

Due to the lack of other treatment options, a rebirth of polymyxins is urgently required. Colistin (also called polymyxin E) and polymyxin B are the only two examples of this antibiotic class that were effectively employed in such critical situations. In the present work, both of the two studied medications were quantified via a simple, green, and non-extracting spectrophotometric approach based on the formation of ion-pair complexes with Erythrosine B. Without using any organic solvents, the pink color of the created complexes was detected at wavelength = 558 nm. To achieve the highest intensity of absorbance, optimum conditions were established by the screening of many experimental factors such as pH, buffer volume, the volume of Erythrosine B, and the time consumed to undergo the reaction. For Colistin and Polymyxin B respectively, Beer-Lambert's law was observed at the concentration ranges of 1-6, 1-9 µg mL- 1. The technique was approved and validated following ICH recommendations. Lastly, the suggested approach has been successfully implemented to quantify the cited medications colorimetrically, for the first time, in their parenteral dosage forms with excellent recoveries. Also, Content uniformity testing was implemented.

Development of UPLC-MS/MS method for the determination of colistin in plasma and kidney and its application in pharmacokinetics

Recently, the frequent emergence of multidrug-resistant gram-negative bacterial infections has forced colistin to be used as one of the last-line options for the treatment of these infections. This study aimed to establish and validate a simple, rapid, and reliable method for the quantitative determination of colistin in plasma and kidney homogenates by ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). The pharmacokinetic parameters of colistin sulfate in rats and the relationship between renal accumulation and time of administration in rats were estimated by measuring plasma and renal colistin concentrations. The colistin in the sample was precipitated by acetonitrile, followed by extraction with nitrogen blow-drying and reconstitution. The chromatographic separation of analytes was conducted on an C18 column using a mobile phase consisting of 0.1% aqueous formic acid and acetonitrile. Polymyxin B was used as an internal standard (IS). Colistin and IS were monitored in positive ion mode with the following mass transition pairs: m/z 585.6→m/z 101.4 for colistin A，m/z 578.6→m/z 101.4 for colistin B and m/z 595.6→m/z 227.2 for IS, respectively. The established method expressed good linearity in 50 - 20000 ng·mL^-1 of colistin, with the lower limit of quantification (LLOQ) of 50 ng·mL^-1. Methodology validations, including accuracy, precision, matrix effect, recovery, stability, and dilution integrity met the US Food and Drug Administration (FDA) acceptance criteria for bioanalytical method validation. Noncompartmental pharmacokinetic parameters were obtained by the statistical moment theory. The estimates for the terminal half-life (t_1/2), the peak time (T_max), the peak concentration (C_max), the area under the plasma concentration-time curve (AUC_0-t), the volume of distribution (V), the total body clearance (CL) and the mean residence time (MRT_0-t) were calculated to be 2.53 ± 1.6 h, 2.17 ± 1.57 h, 2913.01 ± 644.89 ng·mL^-1, 15153.46 ± 3599.81 h·ng·mL^-1, 0.98 ± 0.56 L·kg^-1, 0.28 ± 0.09 L·h^-1·kg^-1 and 4.07 ± 1.13 h, respectively. And the concentrations of colistin in rat kidney tissue after continuous administration for 1, 3, 5, 7 days were 1.49 ± 0.35 μg·g^-1, 2.88 ± 0.74 μg·g^-1, 3.40 ± 0.25 μg·g^-1 and 4.33 ± 0.63 μg·g^-1, respectively. The established method provided a convenient, rapid, stable, sensitive, accurate way for the determination of colistin concentration, which has been successfully used for the pharmacokinetic analysis of colistin sulfate in rat and to explore the relationship between the renal accumulation of colistin and the duration of dosing.

New validated spectrofluorimetric protocol for colistin assay through condensation with 2,2-dihydroxyindan-1,3-dione: application to content uniformity testing

A new, cost-effective and sensitive spectroscopic assay for the quantification of Colistin Sulfate (CS) and its prodrug colistimethate sodium (CMS) has been developed and validated. The validated technique depends on the condensation of the studied drug with 2,2-dihydroxyindan-1,3-dione (ninhydrin) and phenylacetaldehyde using Teorell and Stenhagen buffer (pH = 6) to yield a fluorescent product that is estimated at emission wavelength (λ em = 474 nm) after excitation wavelength (λ ex = 390 nm). The reaction's affecting factors were carefully studied and adjusted accurately. Over the following range (0.4-2.4 μg mL-1), the produced calibration plot looked rectilinear, and the estimated limits of detection and quantification (LOD and LOQ) were 0.051 & 0.154 μg mL-1 respectively. The recommended approach was utilized to evaluate market products containing the investigated drug. Moreover, content uniformity testing was employed as a new procedure not found in the previously reported fluorimetric technique.

HPLC Determination of Colistin in Human Urine Using Alkaline Mobile Phase Combined with Post-Column Derivatization: Validation Using Accuracy Profiles

In this study, the development, validation, and application of a new liquid chromatography post-column derivatization method for the determination of Colistin in human urine samples is demonstrated. Separation of Colistin was performed using a core–shell C₁₈ analytical column in an alkaline medium in order (i) to be compatible with the o-phthalaldehyde-based post-column derivatization reaction and (ii) to obtain better retention of the analyte. The Colistin derivative was detected spectrofluorometrically (λ_ext/λ_em = 340/460 nm) after post-column derivatization with o-phthalaldehyde and N-acetyl cysteine. The post-column derivatization parameters were optimized using the Box–Behnken experimental design, and the method was validated using the total error concept. The β-expectation tolerance intervals did not exceed the acceptance criteria of ±15%, meaning that 95% of future results would be included in the defined bias limits. The limit of detection of the method was adequate corresponding to 100 nmol·L⁻¹. The mean analytical bias (expressed as relative error) in the spiking levels was suitable, being in the range of −2.8 to +2.5% for both compounds with the percentage relative standard deviation lower than 3.4% in all cases. The proposed analytical method was satisfactorily applied to the analysis of the drug in human urine samples.

Salvage Parenteral Antibiotics for Multidrug-Resistant (MDR) Gram-Negative Bacteria; A Fluorescamine-Based Technique for Ultrasensitive Spectrofluorimetric Measurement of Polymyxins; Human Plasma Application

Polymyxins (PMS), namely Colistin (CS) and Polymyxin B (Poly B), are antimicrobial drugs that recently used to treat multi-resistant gram-negative bacteria infections and their resurgence owing to a lack of new antibiotics. A speedy, simple, and ultrasensitive spectrofluorimetric screening of PMS in pharmaceutical formulations and biological fluids was urgently required from this point forward. A reaction between fluorescamine and the aliphatic amino moiety found in both drugs was performed in a slightly alkaline borate buffer (pH 8.5) resulted in highly fluorescent products measured at λ_em 460 (after λ_ex 390.5 nm). Linear calibration curves were constructed over the concentration range of 70 to 1800 ng mL^-1 and 100 to 1400 ng mL^-1 , with slope values of 0.273 and 0.286, correlation coefficients of 0.9998 and 0.9997, and determination coefficient of 0.9997 and 0.9994 for Poly B and CS, respectively. The ultra sensitivity of the proposed method was demonstrated by the very low limits of quantifications values of 67.56 ng mL^-1 and 94.89 ng mL^-1 for Poly B and CS, respectively. The cited drugs were successfully determined in their intravenous market preparations by the prescribed method. Moreover, due to the high sensitivity, the suggested method was employed to assay the investigated drugs in biological fluids.

Estimation of the Difference in Colistin Plasma Levels in Critically Ill Patients with Favorable or Unfavorable Clinical Outcomes

In recent decades, antimicrobial resistance (AMR) has led to an increased use of therapeutic alternatives. Among these options, colistin continues to be an option for the treatment of multi-resistant (MDR) Gram-negative bacterial infections. However, due to its high toxicity (nephrotoxicity and neurotoxicity) and narrow therapeutic window, colistin treatment must be utilized carefully. Colistin-treated patients have been observed to have higher mortality due to inadequate therapeutic levels. The objective of this study was to estimate the difference in colistin plasma levels in critically ill patients, and its relationship to favorable or unfavorable clinical outcomes. This prospective observational study was conducted between September 2017 and June 2020 at the Universidad de La Sabana Clinic, in patients who had been treated with colistimethate sodium (CMS) for at least 72 h until day 7 of drug treatment in the critical care unit of a university hospital. There were no statistically significant differences in colistin levels between groups with favorable or unfavorable clinical outcomes (0.16 SD vs. 0.54 SD p-value = 0.167). There was higher mortality in patients with subtherapeutic levels (18% vs. 0%), and additionally, there was a greater rate of renal failure in the group with higher therapeutic levels (50% vs. 20.7%). Due to the loss of power of the study, we were unable to demonstrate a possible difference between colistin levels related to favorable or unfavorable clinical outcomes at day 7. However, we recommend further studies to evaluate the impact of measuring levels in terms of mortality and security.

A physicochemical assessment of the thermal stability of dextrin-colistin conjugates

Attachment of polysaccharide carriers is increasingly being used to achieve precision delivery and improved effectiveness of protein and peptide drugs. Although it is clear that their clinical effectiveness relies on the purity and integrity of the conjugate in storage, as well as following administration, instability of polysaccharide-based conjugates can reduce the protective efficacy of the polymer, which may adversely affect the bioactive's potency. As a model, these studies used dextrin-colistin conjugates, with varying degrees of polymer modification (1, 2.5 and 7.5 mol% succinoylation) to assess the effect of storage temperature (- 20, 4, 21 and 37 °C) and duration (up to 12 months) on saccharide and colistin release and antimicrobial activity. Estimation of the proportion of saccharide release (by comparison of area under the curve from size exclusion chromatograms) was more pronounced at higher temperatures (up to 3 and 35% at - 20 °C and 37 °C, respectively after 12 months), however, repeated freeze-thaw did not produce any measurable release of saccharides, while addition of amylase (20, 100, 500 IU/L) caused rapid release of saccharides (> 70% total within 24 h). At all temperatures, conjugates containing the lowest degree of succinoylation released the highest proportion of free colistin, which increased with storage temperature, however no trend in saccharide release was observed. Despite the clear physical effects of prolonged storage, antimicrobial activity of all samples was only altered after storage at 37 °C for 12 months (> threefold decreased activity). These results demonstrate significant release of saccharides from dextrin-colistin conjugates during prolonged storage in buffered solution, especially at elevated temperature, which, in most cases, did not affect antimicrobial activity. These findings provide vital information about the structure-activity relationship of dextrin-colistin conjugates, prior to full-scale commercial development, which can subsequently be applied to other polysaccharide-protein and -peptide conjugates.

The first spectrofluorimetric approach for quantification of colistin sulfate and its prodrug colistimethate sodium in pharmaceutical dosage form and human plasma

A new, accurate, nonextractive, and sensitive fluorimetric approach was proposed and validated for the first time estimation of colistin sulfate and its inactive prodrug colistimethate sodium in its bulk form, pharmaceutical formulations, and human plasma. The approach relied on condensation between acetylacetone/formaldehyde and the primary amino moiety of nonfluorescent colistin in Teorell and Stenhagen buffer (pH 2.8) by the Hantzsch reaction to form a highly fluorescent dihydropyridine derivative. The fluorescent product was measured at 460 nm (λ_ex  = 402 nm). A plot of relative fluorescence intensity (RFI) versus concentration was rectilinear over the range 200-4000 ng ml^-1 with excellent correlation (r) and determination (r² ) coefficients of 0.9999 and 0.9998, respectively. The limit of detection (LOD) and limit of quantitation (LOQ) were 40.91 and 123.99 ng ml^-1 , respectively. The present procedure was useful for determination of colistin sulfate either in powder form for suspension or in its parenteral prodrug colistimethate sodium in vial formulation. The investigated approach was applied for in vitro quantification of this drug in spiked human plasma, with a per cent mean recovery of 98.24 ± 1.34. The proposed method is reliable, selective, and does not require tedious sample pretreatment steps, expensive instrumentation, or harmful reagents, all of which make it ideally suited for use in quality control laboratories.

Colistimethate Acidic Hydrolysis Revisited: Arrhenius Equation Modeling Using UPLC-QToF MS

Colistimethate (CMS), the prodrug of polymyxin E (colistin), is an antibiotic widely used as a last-line therapy against multidrug resistant Gram-negative bacteria, but little is known about its pharmacokinetics as its administration has stopped as a result of high neuro- and nephro-toxicity. The measurement of CMS levels in patients’ biological fluids is of great importance in order to find the optimal dose regimen reducing the drug toxicity. Until now, CMS assay methods are based on the indirect determination after its hydrolysis to colistin (CS). Herein, the aim is to find the optimal conditions for the complete hydrolysis of CMS to CS. The reaction was studied at accelerated conditions: 40 °C, 50 °C, and 60 °C, and the results were evaluated by assessing the Arrhenius equation and computation employing the Tenua software. A validated analytical methodology based on ultra-performance liquid chromatography (UPLC) coupled to a hybrid quadrupole time of flight (QToF) instrument is developed for the simultaneous measurement of CMS and CS. The current methodology resulted in complete hydrolysis, in contrast with the previously reported one.

Synergistic effects of zinc oxide nanoparticles and various antibiotics combination against Pseudomonas aeruginosa clinically isolated bacterial strains

P. aeruginosa causes mostly both community-acquired and nosocomial infections, which leads to serious therapeutic challenges for treatment and requirement of appropriate therapeutic agent is needed which can combat antibiotic resistance. The research work was performed to investigate the effect of Zinc Oxide nanoparticles (ZnO NPs) in combination with Meropenem, Ciprofloxacin, and Colistin against clinical isolated strains of P. aeruginosa and ATCC 27853 strain. The minimum inhibitory concentration (MIC) of ZnO NPs and the antibiotics (Meropenem, Ciprofloxacin, and Colistin), was determined by the microdilution method and the results of MIC values were ranging between 1 and 16 µg/mL was found to be shown for antibiotics and ZnO NPs found to showed highest MIC values ranging from 2000 to 4000 µg/mL. The fractional inhibitory concentration index (FICI) was calculated using checkerboard method to test the combinations of ZnO NPs and the antibiotics (Meropenem, Ciprofloxacin, and Colistin), and among all the six P. aeruginosa clinical isolated strains P. aeruginosa (MRO-16-3 and MRO-16-4), showed FICI as 0.24 and 0.39 9, whereas P. aeruginosa ATCC 27853 strain showed FICI as 0.41 which indicates synergistic effect with Colistin. The time kill growth curve showed synergistic effect for the combination of Colistin and ZnO NPs against P. aeruginosa (MRO-16-3 and MRO-16-) strains. P. aeruginosa (MRO-16-3) was found to be highly sensitive to Colistin with an MIC of 2 µg/mL, which has shown to reduced bacterial growth to zero colonies after 24 h of incubation. In conclusion, combination of Colistin and ZnO NPs at appropriate dosage intervals might be beneficial as using therapeutic agent in treatment of P. aeruginosa ailments.

Quantification of Colistin in Plasma by Liquid Chromatography-Tandem Mass Spectrometry: Application to a Pharmacokinetic Study

Colistin is a polymixin antibiotic (polymixin E) that is produced by Bacillus colistinus bacteria. The aim of the present study was to develop and validate a method to quantify colistin levels in plasma using high performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) technique and then apply it in experimental animals (rats) to investigate the pharmacokinetic profile of colistin in this species. Polymyxin B was used as an internal standard (IS) and the quantitation was carried out using ESI + interface and employing multiple reaction monitoring (MRM) mode. A mobile phase consisting of acetonitrile:water:formic acid (30:70:0.1%; v/v/v) was employed and Zorbax eclipse plus C18 (1.8 µm, 2.1 mm i.d. x 50 mm) was the optimal column for this method and utilized at a flow rate of 0.2 mL/min. The full scan mass spectra of precursor/product ions of colistin A were at m/z 585.5 > 100.8, for colistin B at m/z 578.8 > 101 and for the IS at m/z 602.8 > 101. The lower limit of quantification (LLOQ) was 0.5 µg/mL. The method demonstrated acceptable intra-run and inter-run precision and accuracy for both colistin A and colistin B. Colistin was stable when assessed for long-term stability, freeze-thaw stability and autosampler stability. However, it was not stable when stored at room temperature. The matrix effect evaluation showed minimal or no effect. Incurred sample reanalysis findings were within acceptable ranges (<20% of the nominal concentration). The pharmacokinetic parameters of colistin were investigated in rats using the present method. The developed method for colistin demonstrates that it is rapid, sensitive, specific, accurate, precise, and reliable.

Population pharmacokinetics of colistin and the relation to survival in critically ill patients infected with colistin susceptible and carbapenem-resistant bacteria

OBJECTIVES

The aim was to analyse the population pharmacokinetics of colistin and to explore the relationship between colistin exposure and time to death.

METHODS

Patients included in the AIDA randomized controlled trial were treated with colistin for severe infections caused by carbapenem-resistant Gram-negative bacteria. All subjects received a 9 million units (MU) loading dose, followed by a 4.5 MU twice daily maintenance dose, with dose reduction if creatinine clearance (CrCL) < 50 mL/min. Individual colistin exposures were estimated from the developed population pharmacokinetic model and an optimized two-sample per patient sampling design. Time to death was evaluated in a parametric survival analysis.

RESULTS

Out of 406 randomized patients, 349 contributed pharmacokinetic data. The median (90% range) colistin plasma concentration was 0.44 (0.14-1.59) mg/L at 15 minutes after the end of first infusion. In samples drawn 10 hr after a maintenance dose, concentrations were >2 mg/L in 94% (195/208) and 44% (38/87) of patients with CrCL ≤120 mL/min, and >120 mL/min, respectively. Colistin methanesulfonate sodium (CMS) and colistin clearances were strongly dependent on CrCL. High colistin exposure to MIC ratio was associated with increased hazard of death in the multivariate analysis (adjusted hazard ratio (95% CI): 1.07 (1.03-1.12)). Other significant predictors included SOFA score at baseline (HR 1.24 (1.19-1.30) per score increase), age and Acinetobacter or Pseudomonas as index pathogen.

DISCUSSION

The population pharmacokinetic model predicted that >90% of the patients had colistin concentrations >2 mg/L at steady state, but only 66% at 4 hr after start of treatment. High colistin exposure was associated with poor kidney function, and was not related to a prolonged survival.

In vitro activities of colistin, imipenem and ceftazidime against drug-resistant Pseudomonas aeruginosa and Acinetobacter baumannii isolates in the south of Iran

OBJECTIVE

The present study aimed to determine in vitro activity of colistin and other agents against drug-resistant isolates of Pseudomonas aeruginosa and Acinetobacter baumannii.

RESULTS

This in vitro study performed on a collection of non-fermenting Gram-negative bacilli (NFB) consist of 18 A. baumannii and 21 P. aeruginosa isolates. Non-duplicated isolates (one per patient) were isolated from blood, endotracheal tube and sputum samples of hospitalized patients in the south of Iran. The minimum inhibitory concentrations (MICs) of each isolate was determined using Epsilometer (E)-test strips containing colistin, imipenem, and ceftazidime. In overall, all A. baumannii isolates were non-susceptible to imipenem and ceftazidime. In contrast, all isolates were susceptible to colistin with MIC50 and MIC90 of 0.75/1.5 µg/mL, respectively. Antibiotic susceptibility results showed that 81% and 23.8% of P. aeruginosa isolates were susceptible to ceftazidime and imipenem, respectively. While, all of the P. aeruginosa isolates were susceptible to colistin with MIC50 and MIC90 of 0.5/1 µg/mL, respectively. In summary, colistin showed the promising in vitro activity against drug-resistant strains of two clinically important NFB in our region. However, investigation on a larger collection of drug-resistant strains demands to support these observations in the near future.

Clinical Pharmacokinetics, Pharmacodynamics and Toxicodynamics of Polymyxins: Implications for Therapeutic Use

The availability of sensitive, accurate and specific analytical methods for the measurement of polymyxins in biological fluids has enabled an understanding of the pharmacokinetics of these important antibiotics in healthy humans and patients. Colistin is administered as its inactive prodrug colistin methanesulfonate (CMS) and has especially complex pharmacokinetics. CMS undergoes conversion in vivo to the active entity colistin, but the rate of conversion varies from brand to brand and possibly from batch to batch. The extent of conversion is generally quite low and depends on the relative magnitudes of the conversion clearance and other clearance pathways for CMS of which renal excretion is a major component. Formed colistin in the systemic circulation undergoes very extensive tubular reabsorption; the same mechanism operates for polymyxin B which is administered in its active form. The extensive renal tubular reabsorption undoubtedly contributes to the propensity for the polymyxins to cause nephrotoxicity. While there are some aspects of pharmacokinetic behaviour that are similar between the two clinically used polymyxins, there are also substantial differences. In this chapter, the pharmacokinetics of colistin, administered as CMS, and polymyxin B are reviewed, and the therapeutic implications are discussed.

Modified Colistin Regimen for Critically Ill Patients with Acute Renal Impairment and Continuous Renal Replacement Therapy

Colistin is a last resort antibiotic to treat multidrug-resistant Gram-negative bacteria infections. Colistin is administered intravenously in the form of its inactive prodrug colistin methanesulfonate (CMS). For patients with acute kidney impairment and continuous renal replacement therapy high extracorporeal clearance may cause a substantial removal of active colistin from the bloodstream, eventually decreasing its antibacterial efficacy. Currently recommended doses of CMS may therefore be inadequate for these patients. We report on the potential value of a modified regimen that adopts a loading dose of CMS (bolus of 9 MU vs. conventional 3 MU every 8 h), followed by maintenance (3 MU every 8 h). Preliminary pharmacokinetic evidence for the feasibility and efficacy of this regimen is described for 2 patients.

Polymyxins: Antibacterial Activity, Susceptibility Testing, and Resistance Mechanisms Encoded by Plasmids or Chromosomes

Polymyxins are well-established antibiotics that have recently regained significant interest as a consequence of the increasing incidence of infections due to multidrug-resistant Gram-negative bacteria. Colistin and polymyxin B are being seriously reconsidered as last-resort antibiotics in many areas where multidrug resistance is observed in clinical medicine. In parallel, the heavy use of polymyxins in veterinary medicine is currently being reconsidered due to increased reports of polymyxin-resistant bacteria. Susceptibility testing is challenging with polymyxins, and currently available techniques are presented here. Genotypic and phenotypic methods that provide relevant information for diagnostic laboratories are presented. This review also presents recent works in relation to recently identified mechanisms of polymyxin resistance, including chromosomally encoded resistance traits as well as the recently identified plasmid-encoded polymyxin resistance determinant MCR-1. Epidemiological features summarizing the current knowledge in that field are presented.

Agents of Last Resort: Polymyxin Resistance

Polymyxin resistance is a major public health threat, as the polymyxins represent "last-line" therapeutics for Gram-negative pathogens resistant to essentially all other antibiotics. Improved understanding of mechanisms of, and risk factors for, polymyxin resistance, as well as infection prevention and stewardship strategies, together with optimization of dosing of polymyxins including in combination regimens, can help to limit the emergence and dissemination of polymyxin resistance.

Urinary Concentrations of Colistimethate and Formed Colistin after Intravenous Administration in Patients with Multidrug-Resistant Gram-Negative Bacterial Infections

Limited information is available on the urinary excretion of colistin in infected patients. This study aimed to investigate the pharmacokinetics of colistimethate sodium (CMS) and formed colistin in urine in patients with multidrug-resistant (MDR) Gram-negative bacterial infections. A pharmacokinetic study was conducted on 12 patients diagnosed with an infection caused by an extremely drug-resistant (XDR) P. aeruginosa strain and treated with intravenous CMS. Fresh urine samples were collected at 2-h intervals, and blood samples were collected predose (C_{min ss}) and at the end of the CMS infusion (C_{max ss}) for measurement of concentrations of CMS and formed colistin using high-performance liquid chromatography (HPLC). CMS urinary recovery was determined as the summed amount of CMS and formed colistin recovered in urine for each 2-h interval divided by the CMS dose. There were 12 enrolled patients, 9 of whom were male (75%). Data [median (range)] were as follows: age, 65.5 (37 to 86) years; colistimethate urinary recovery 0 to 6 h, 42.6% (2.9% to 72.8%); range of concentrations of colistin in urine, <0.1 to 95.4 mg/liter; C_{min ss} and C_{max ss} of colistin in plasma, 0.9 (<0.2 to 1.4) and 0.9 (<0.2 to 1.4) mg/liter, respectively. In 6/12 (50%) patients, more than 40% of the CMS dose was recovered in the urine within the first 6 h after CMS administration. This study demonstrated rapid urinary excretion of CMS in patients within the first 6 h after intravenous administration. In all but one patient, the concentrations of formed colistin in urine were above the MIC for the most predominant isolate of P. aeruginosa in our hospital. Future studies are warranted for optimizing CMS dosage regimens in urinary tract infection (UTI) patients.

Polymyxins for CNS infections: Pharmacology and neurotoxicity

Central nervous system (CNS) infections caused by multi-drug resistant (MDR) Gram-negative bacteria present a major health and economic burden worldwide. Due to the nearly empty antibiotic discovery pipeline, polymyxins (i.e. polymyxin B and colistin) are used as the last-line therapy against Gram-negative 'superbugs' when all other treatment modalities have failed. The treatment of CNS infections due to multi-drug resistant Gram-negative bacteria is problematic and associated with high mortality rates. Colistin shows significant efficacy for the treatment of CNS infections caused by MDR Gram-negative bacteria that are resistant to all other antibiotics. In particular, MDR Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella pneumoniae which are resistant to expanded-spectrum and fourth-generation cephalosporins, carbapenems and aminoglycosides, represent a major therapeutic challenge, although they can be treated with colistin or polymyxin B. However, current dosing recommendations of intrathecal/intraventricular polymyxins are largely empirical, as we have little understanding of the pharmacokinetics/pharmacodynamics and, importantly, we are only starting to understand the mechanisms of potential neurotoxicity. This review covers the current knowledge-base on the mechanisms of disposition and potential neurotoxicity of polymyxins as well as the combined use of neuroprotective agents to alleviate polymyxins-related neurotoxicity. Progress in this field will provide the urgently needed pharmacological information for safer and more efficacious intrathecal/intraventricular polymyxin therapy against life-threatening CNS infections caused by Gram-negative 'superbugs'.

A simple method for assaying colistimethate sodium in pharmaceutical aerosol samples using high performance liquid chromatography

A rapid and simple reversed-phase high performance liquid chromatography (HPLC) method for the quantitation of colistimethate sodium in pharmaceutical formulations has been developed. The chromatographic separation was performed using a Phenomenex Kinetex XB-C18 column with gradient elution using a mobile phase containing acetonitrile and 32mM sodium sulphate. Quantitation is based on the sum of the areas of two prominent peaks in the chromatogram, which produces a total peak area that is stable for 120 sample injections. The HPLC method was validated over the range 0.05-7mg/mL, and was shown to be suitable for the analysis of aerosolised pharmaceuticals in terms of aerosol output onto filter and for the analysis of samples from a cascade impactor, which is used for the determination of aerosol particle size.

Pharmacokinetics/Pharmacodynamics of Pulmonary Delivery of Colistin against Pseudomonas aeruginosa in a Mouse Lung Infection Model

Colistin is often administered by inhalation and/or the parenteral route for the treatment of respiratory infections caused by multidrug-resistant (MDR) Pseudomonas aeruginosa However, limited pharmacokinetic (PK) and pharmacodynamic (PD) data are available to guide the optimization of dosage regimens of inhaled colistin. In the present study, PK of colistin in epithelial lining fluid (ELF) and plasma was determined following intratracheal delivery of a single dose of colistin solution in neutropenic lung-infected mice. The antimicrobial efficacy of intratracheal delivery of colistin against three P. aeruginosa strains (ATCC 27853, PAO1, and FADDI-PA022; MIC of 1 mg/liter for all strains) was examined in a neutropenic mouse lung infection model. Dose fractionation studies were conducted over 2.64 to 23.8 mg/kg of body weight/day. The inhibitory sigmoid model was employed to determine the PK/PD index that best described the antimicrobial efficacy of pulmonary delivery of colistin. In both ELF and plasma, the ratio of the area under the unbound concentration-time profile to MIC (fAUC/MIC) was the PK/PD index that best described the antimicrobial effect in mouse lung infection (R² = 0.60 to 0.84 for ELF and 0.64 to 0.83 for plasma). The fAUC/MIC targets required to achieve stasis against the three strains were 684 to 1,050 in ELF and 2.15 to 3.29 in plasma. The histopathological data showed that pulmonary delivery of colistin reduced infection-caused pulmonary inflammation and preserved the integrity of the lung epithelium, although colistin introduced mild pulmonary inflammation in healthy mice. This study showed pulmonary delivery of colistin provides antimicrobial effects against MDR P. aeruginosa lung infections superior to those of parenteral administrations. For the first time, our results provide important preclinical PK/PD information for optimization of inhaled colistin therapy.

Substantial Targeting Advantage Achieved by Pulmonary Administration of Colistin Methanesulfonate in a Large-Animal Model

Colistin, administered as its inactive prodrug colistin methanesulfonate (CMS), is often used in multidrug-resistant Gram-negative pulmonary infections. The CMS and colistin pharmacokinetics in plasma and epithelial lining fluid (ELF) following intravenous and pulmonary dosing have not been evaluated in a large-animal model with pulmonary architecture similar to that of humans. Six merino sheep (34 to 43 kg body weight) received an intravenous or pulmonary dose of 4 to 8 mg/kg CMS (sodium) or 2 to 3 mg/kg colistin (sulfate) in a 4-way crossover study. Pulmonary dosing was achieved via jet nebulization through an endotracheal tube cuff. CMS and colistin were quantified in plasma and bronchoalveolar lavage fluid (BALF) samples by high-performance liquid chromatography (HPLC). ELF concentrations were calculated via the urea method. CMS and colistin were comodeled in S-ADAPT. Following intravenous CMS or colistin administration, no concentrations were quantifiable in BALF samples. Elimination clearance was 1.97 liters/h (4% interindividual variability) for CMS (other than conversion to colistin) and 1.08 liters/h (25%) for colistin. On average, 18% of a CMS dose was converted to colistin. Following pulmonary delivery, colistin was not quantifiable in plasma and CMS was detected in only one sheep. Average ELF concentrations (standard deviations [SD]) of formed colistin were 400 (243), 384 (187), and 184 (190) mg/liter at 1, 4, and 24 h after pulmonary CMS administration. The population pharmacokinetic model described well CMS and colistin in plasma and ELF following intravenous and pulmonary administration. Pulmonary dosing provided high ELF and low plasma colistin concentrations, representing a substantial targeting advantage over intravenous administration. Predictions from the pharmacokinetic model indicate that sheep are an advantageous model for translational research.

Colistin loading dose: evaluation of the published pharmacokinetic and clinical data

Colistin (polymyxin E) has been widely used since the beginning of the century as a last-option antibiotic for the treatment of patients with multidrug-resistant and extensively-drug resistant bacterial infections. However, colistin dosing is troublesome because each batch of the drug contains a mixture of components and because it is administered as the inactive pro-drug colistimethate sodium (CMS), which has different pharmacokinetic (PK) properties from the active drug. Significant inter-individual and intra-individual variability in colistin plasma concentrations have been observed in all available studies. Low plasma concentrations of the drug during the first hours from initiation of administration suggested that a loading dose would be appropriate. However, other PK studies challenge this approach. Clinical data from randomised controlled trials are not available, whilst data from observational studies do not support higher effectiveness of a loading dose. In this review, we summarise the available data regarding the administration of a loading dose and discuss the issues surrounding the potential advantages and disadvantages as well as the context within which such an approach could be beneficial to patients.

Challenge for higher colistin dosage in critically ill patients receiving continuous venovenous haemodiafiltration

Traditionally, reduced daily doses of colistin methanesulphonate (CMS) in critically ill patients receiving continuous venovenous haemodiafiltration (CVVHDF) have resulted in suboptimal colistin concentrations. The necessity of a loading dose (LD) at treatment initiation has been proposed. A LD of 9 million IU (MU) [ca. 270 mg of colistin base activity (CBA)] was administrated with a maintenance dose of 4.5 MU (ca. 140 mg CBA) every 12 h (q12h) to eight critically ill patients receiving renal replacement therapy. Blood samples were collected immediately before and at different time intervals after the LD and the fourth dose, whilst pre-filter and post-filter blood samples were also collected. CMS and colistin concentrations were determined using an LC-MS/MS assay. Median maximum observed concentrations after the LD were 22.1 mg/L for CMS and 1.55 mg/L for colistin, whereas during maintenance dosing the corresponding values were 12.6 mg/L and 1.72 mg/L, respectively. CVVHDF clearance was determined as 2.98 L/h for colistin, equivalent to 62% of total apparent colistin clearance in CVVHDF patients. Both CMS and colistin were cleared by CVVHDF. Application of a LD of 9 MU CMS resulted in more rapid achievement of the target colistin concentration. Following implementation of a predicted pharmacokinetic model on plasma CMS/colistin concentrations, a LD of 12 MU CMS appears more appropriate, whilst a CMS maintenance dosage of at least 6.5-7.5 MU q12h is suggested in patients undergoing CVVHDF. However, further clinical studies are warranted to assess the safety of a LD of 12 MU CMS in patients receiving CVVHDF.

Development and validation of a UHPLC-MS/MS assay for colistin methanesulphonate (CMS) and colistin in human plasma and urine using weak-cation exchange solid-phase extraction

A rapid ultra high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) assay method was developed for determination of CMS and formed colistin in human plasma and urine. After extraction on a 96-well SPE Supra-Clean Weak Cation Exchange (WCX) plate, the eluents were mixed and injected into the UHPLC-MS/MS system directly. A Phonomenex Kinetex XB-C18 analytical column was employed with a mobile phase consisting of solution "A" (acetonitrile:methanol, 1:1, v/v) and solution "B" (0.1% formic acid in water, v/v). The flow rate was 0.4 mL/min with gradient elution over 3.5 min. Ions were detected in ESI positive ion mode and the precursor-product ion pairs were m/z 390.7/101.3 for colistin A, m/z 386.0/101.2 for colistin B, and m/z 402.3/101.2 for polymyxin B1 (IS), respectively. The lower limit of quantification (LLOQ) was 0.0130 and 0.0251 mg/L for colistin A and colistin B in both plasma and urine with accuracy (relative error, %) <± 12.6% and precision (relative standard deviation, %) <± 10.8%. Stability of CMS was demonstrated in biological samples before and during sample treatment, and in the extract. This new analytical method provides high-throughput treatment and optimized quantification of CMS and colistin, which offers a highly efficient tool for the analysis of a large number of clinical samples as well as routine therapeutic drug monitoring.

Colistin Population Pharmacokinetics after Application of a Loading Dose of 9 MU Colistin Methanesulfonate in Critically Ill Patients

Colistin has been revived, in the era of extensively drug-resistant (XDR) Gram-negative infections, as the last-resort treatment in critically ill patients. Recent studies focusing on the optimal dosing strategy of colistin have demonstrated the necessity of a loading dose at treatment initiation (D. Plachouras, M. Karvanen, L. E. Friberg, E. Papadomichelakis, A. Antoniadou, I. Tsangaris, I. Karaiskos, G. Poulakou, F. Kontopidou, A. Armaganidis, O. Cars, and H. Giamarellou, Antimicrob Agents Chemother 53:3430-3436, 2009, http://dx.doi.org/10.1128/AAC.01361-08; A. F. Mohamed, I. Karaiskos, D. Plachouras, M. Karvanen, K. Pontikis, B. Jansson, E. Papadomichelakis, A. Antoniadou, H. Giamarellou, A. Armaganidis, O. Cars, and L. E. Friberg, Antimicrob Agents Chemother 56:4241- 4249, 2012, http://dx.doi.org/10.1128/AAC.06426-11; S. M. Garonzik, J. Li, V. Thamlikitkul, D. L. Paterson, S. Shoham, J. Jacob, F. P. Silveira, A. Forrest, and R. L. Nation, Antimicrob Agents Chemother 55:3284-3294, 2011, http://dx.doi.org/10.1128/AAC.01733-10). In 19 critically ill patients with suspected or microbiologically documented infections caused by XDR Gram-negative strains, a loading dose of 9 MU colistin methanesulfonate (CMS) (∼ 270 mg colistin base activity) was administered with a maintenance dose of 4.5 MU every 12 h, commenced after 24 h. Patients on renal replacement were excluded. CMS infusion was given over 30 min or 1 h. Repeated blood sampling was performed after the loading dose and after the 5th or 6th dose. Colistin concentrations and measured CMS, determined after hydrolization to colistin and including the partially sulfomethylated derivatives, were determined with a liquid chromatography-tandem mass spectrometry assay. Population pharmacokinetic analysis was conducted in NONMEM with the new data combined with data from previous studies. Measured colistimethate concentrations were described by 4 compartments for distribution and removal of sulfomethyl groups, while colistin disposition followed a 1-compartment model. The average observed maximum colistin A plus B concentration was 2.65 mg/liter after the loading dose (maximum time was 8 h). A significantly higher availability of the measured A and B forms of colistimethate and colistin explained the higher-than-expected concentrations in the present study compared to those in previous studies. Creatinine clearance was a time-varying covariate of colistimethate clearance. The incidence of acute renal injury was 20%.

Preliminary method for direct quantification of colistin methanesulfonate by attenuated total reflectance Fourier transform infrared spectroscopy

Colistin use has increased in response to the advent of infections caused by multidrug-resistant organisms. It is administered parenterally as an inactive prodrug, colistin methanesulfonate (CMS). Various formulations of CMS and labeling conventions can lead to confusion about colistin dosing, and questions remain about the pharmacokinetics of CMS. Since CMS does not have strong UV absorbance, current methods employ a laborious process of chemical conversion to colistin followed by precolumn derivatization to detect formed colistin by high-performance liquid chromatography. Here, we report a method for direct quantification of colistin methanesulfonate by attenuated total reflectance Fourier transform infrared spectroscopy (ATR FTIR).

Colistin, mechanisms and prevalence of resistance

BACKGROUND

Infections caused by multi-drug-resistant Gram-negative bacteria, particularly Acinetobacter baumannii, Pseudomonas aeruginosa and Klebsiella pneumoniae, that cause nosocomial infections, represent a growing problem worldwide. The rapid increase in the prevalence of Gram-negative pathogens that are resistant to fluoroquinolones and aminoglycosides as well as all β-lactams, including carbapenems, monobactam, cephalosporins and broad-spectrum penicillins, has prompted the reconsideration of colistin as a valid therapeutic option. Colistin is an old class of cationic, which act by disrupting the bacterial membranes resulting in cellular death. Although there has been a significant recent increase in the data gathered on colistin, focusing on its chemistry, antibacterial activity, mechanism of action and resistance, pharmacokinetics, pharmacodynamics and new clinical application, the prevalence of colistin resistance has been very little reported in the literature. This review concentrates on recent literature aimed at optimizing the clinical use of this important antibiotic.

METHODS

The available evidence from various studies (microbiological and clinical studies, retrieved from the PubMed, and Scopus databases) regarding the mechanisms and prevalence of resistance was evaluated.

RESULTS

Increasing use of colistin for treatment of infections caused by these bacteria has led to the emergence of colistin resistance in several countries worldwide. Although resistance to polymyxins is generally less than 10%, it is higher in the Mediterranean and South-East Asia (Korea and Singapore), where colistin resistance rates are continually increasing.

CONCLUSION

There is a critical need for effective infection prevention and control measures and strict use of antibiotics in the world to control the rise and spread of colistin resistance.

Extracorporeal clearance of colistin methanesulphonate and formed colistin in end-stage renal disease patients receiving intermittent haemodialysis: implications for dosing

OBJECTIVES

Colistin, administered intravenously as its inactive prodrug colistin methanesulphonate (CMS), is being increasingly used. However, there is very limited information available on the impact of haemodialysis (HD) on the pharmacokinetics of CMS and formed colistin.

PATIENTS AND METHODS

A single 30 min intravenous dose of CMS (150 mg of colistin base activity) was administered to 10 patients undergoing HD. HD was performed from 1.5 to 5.5 h after the start of the CMS infusion. Serial blood samples were collected over 50 h, additional blood samples pre- and post-dialysis membrane at three timepoints during HD, dialysate samples at four timepoints during HD, and a cumulative urine sample over 24 h. CMS and colistin were determined by HPLC. Population modelling and determination of HD clearance by multiple methods was conducted.

RESULTS

The average amount of CMS recovered in the dialysate was 30.6% of the dose administered. The concentrations of CMS and colistin in the plasma and the amounts of CMS recovered in the dialysate were well described by the population disposition model. The clearance of CMS by dialysis as estimated by population analysis based on systemic plasma concentrations and amounts in the dialysate was 4.26 L/h (26% coefficient of variation). The dialysis clearance determined from the pre- and post-membrane plasma concentrations was 5.67 L/h (21%) for CMS and 3.99 L/h (44%) for colistin. Thus, CMS clearance by dialysis from trans-cartridge extraction was ∼30% higher than when calculated based on the amount in dialysate, suggesting adsorption to the membrane.

CONCLUSIONS

Due to the extensive removal of CMS by dialysis, HD should be conducted at the end of a dosing interval and a supplemental dose should be administered.

Colistin pharmacokinetics in burn patients during continuous venovenous hemofiltration

While colistin is considered a last resort for the treatment of multidrug-resistant Gram-negative bacterial infections, there has been an increase in its use due to the increasing prevalence of drug-resistant infections worldwide. The pharmacology of colistin is complex, and pharmacokinetic data are limited, especially in patients requiring renal replacement therapy. As a result, dosing for patients who require renal replacement remains a challenge. Here, we present pharmacokinetic data for colistin from two burn patients (37 and 68 years old) infected with colistin-susceptible isoclonal Acinetobacter baumannii and receiving continuous venovenous hemofiltration (CVVH). To our knowledge, we are the first to examine data from before and during CVVH (for one patient), allowing analysis of the effect of CVVH on colistin pharmacokinetics. Pharmacokinetic/pharmacodynamic analysis indicated that a dose increase from 1.5 to 2.2 mg/kg of body weight colistin base activity on CVVH was insufficient to satisfy the target parameter of an AUC24/MIC (area under the concentration-time curve over 24 h in the steady state divided by the MIC) of ≥ 60 at an MIC of ≥ 1 μg/ml in one patient with residual endogenous renal function. Plasma concentrations of colistin ranged from 0 to 15 μg/ml, with free colistin levels ranging from 0.4 to 2.2 μg/ml. While both patients resolved their clinical infections and survived to discharge, colistin-resistant colonizing isolates resulted from therapy in one patient. The variabilities observed in colistin concentrations and pharmacokinetic characteristics highlight the importance of pharmacokinetic monitoring of antibiotics in patients undergoing renal replacement therapy.

Colistin: understanding and applying recent pharmacokinetic advances

Colistin, the most widely used polymyxin antibiotic, was originally introduced in the late 1950s before the establishment of the present-day drug approval process. Originally shelved due to toxicity concerns, colistin, in the form of its inactive prodrug colistin methanesulfonate, has undergone a renaissance in the past 15 years. Unfortunately, this is not because of an improved adverse-effect profile but because colistin is among the only remaining antibiotics with activity against multidrug-resistant gram-negative bacilli. Pharmacokinetic and pharmacodynamic data are limited to guide the appropriate use of colistin; however, important advances have occurred over the past 5 years. Since its reintroduction, published reports regarding colistin have produced discordant results in terms of both efficacy and safety. Because the efficacy and toxicity of colistin are dose dependent, the impact of discordant dosing recommendations cannot be understated. This review highlights the issues leading to differing and often conflicting dosing recommendations, reviews the recent pharmacokinetic advances, and provides recommendations for the optimal use of colistin.

Intraventricular or intrathecal colistin for the treatment of central nervous system infections caused by multidrug-resistant Gram-negative bacteria

Central nervous system infections caused by Gram-negative bacteria susceptible only to colistin are rare but life-threatening and increasing in prevalence. Given the current antibiotic development pipeline it is likely that the paucity of therapeutic options will continue for the next years. Colistin is an amphipathic bactericidal antibiotic which is administered systemically as colistin methanesulfonate (also known as colistimethate sodium). Colistin methanesulfonate is the inactive prodrug, and in cerebrospinal fluid undergoes spontaneous hydrolysis to colistin (the active form with antimicrobial activity). In this review, we describe and evaluate the clinical and experimental data supporting the use of intraventricular (IVT) or intrathecal (IT) colistin against multidrug-resistant Gram-negative infections of the central nervous system, describe the permeability of the blood-brain barrier to colistin, the pharmacokinetics of colistin after IVT administration of colistin methanesulfonate, its anti-endotoxin activity, discuss the opportunity to administer colistin intraventricularly or intrathecally and the dose regimen, and provide recommendations based on the available evidence.

Pulmonary and systemic pharmacokinetics of inhaled and intravenous colistin methanesulfonate in cystic fibrosis patients: targeting advantage of inhalational administration

The purpose of this study was to define the pulmonary and systemic pharmacokinetics of colistin methanesulfonate (CMS) and formed colistin following intravenous (i.v.) and inhaled administration in cystic fibrosis (CF) patients. Six CF subjects were administered nebulized CMS doses of 2 and 4 million IU and an i.v. CMS infusion of 150 mg of colistin base activity. Blood plasma, sputum, and urine samples were collected for 12 to 24 h postdose. To assess the tolerability of the drug, lung function tests, blood serum creatinine concentrations, and adverse effect reports were recorded. All doses were well tolerated in the subjects. The pharmacokinetic parameters for CMS following i.v. delivery were consistent with previously reported values. Sputum concentrations of formed colistin were maintained at <1.0 mg/liter for 12 h postdose. Nebulization of CMS resulted in relatively high sputum concentrations of CMS and formed colistin compared to those resulting from i.v. administration. The systemic availability of CMS was low following nebulization of 2 and 4 million IU (7.93% ± 4.26% and 5.37% ± 1.36%, respectively), and the plasma colistin concentrations were below the limit of quantification. Less than 2 to 3% of the nebulized CMS dose was recovered in the urine samples in 24 h. The therapeutic availability and drug targeting index for CMS and colistin following inhalation compared to i.v. delivery were significantly greater than 1. Inhalation of CMS is an effective means of targeting CMS and formed colistin for delivery to the lungs, as high lung exposure and minimal systemic exposure were achieved in CF subjects.

Development and validation of a liquid chromatography-mass spectrometry assay for polymyxin B in bacterial growth media

There is increasing interest in the optimization of polymyxin B dosing regimens to treat infections caused by multidrug-resistant Gram-negative bacteria. We aimed to develop and validate a liquid chromatography-single quadrupole mass spectrometry (LC-MS) method to quantify polymyxin B in two growth media commonly used in in vitro pharmacodynamic studies, cation-adjusted Mueller-Hinton and tryptone soya broth. Samples were pre-treated with sodium hydroxide (1.0M) and formic acid in acetonitrile (1:100, v/v) before analysis. The summed peak areas of polymyxin B1 and B2 relative to the summed peak areas of colistin A and B (internal standard) were used to quantify polymyxin B. Quality control samples were prepared and analyzed to assess the intra- and inter-day accuracy and precision. The robustness of the assay in the presence of bacteria and commonly co-administered antibiotics (rifampicin, doripenem, imipenem, cefepime and tigecycline) was also examined. Chromatographic separation was achieved with retention times of approximately 9.7min for polymyxin B2 and 10.4min for polymyxin B1. Calibration curves were linear between 0.103 and 6.60mg/L. Accuracy (% relative error) and precision (% coefficient of variation), pooled for all assay days and matrices (n=84), were -6.85% (8.17%) at 0.248mg/L, 1.73% (6.15%) at 2.48mg/L and 1.54% (5.49%) at 4.95mg/L, and within acceptable ranges at all concentrations examined. Further, the presence of high bacterial concentrations or of commonly co-administered antibiotics in the samples did not affect the assay. The accuracy, precision and cost-efficiency of the assay make it ideally suited to quantifying polymyxin B in samples from in vitro pharmacodynamic models.

Treatment options for multidrug-resistant bacteria

As a consequence of antibiotic overuse and misuse, nosocomial infections caused by multidrug-resistant bacteria represent a physician's nightmare throughout the world. No newer antimicrobials active against Pseudomonas aeruginosa, the main multidrug-resistant nosocomial pathogen, are available or under investigation. The only exceptions are linezolid, some newer glycopeptides (dalbavancin, oritavancin and telavancin) and daptomycin (a lipopeptide), which are active against methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus (VRE) strains, as well as tigecycline, a potent in vitro glycylcycline against MRSA, VRE, Acinetobacter baumannii and entended-spectrum beta-lactamase (ESBL)+ Enterobacteriaceae. Colistin, an antibiotic of the 1950s has been rediscovered by intensive care unit physicians for use against ESBL+ Enterobacteriaceae, as well as against multidrug-resistant P. aeruginosa and A. baumannii isolates. Although success rates with colistin range between 50 and 73%, almost all studies are retrospective. Immunostimulation efforts against S. aureus are still under development. As antibiotic research and development stagnate, rational policies for prescribing existing antibiotics plus strict infection control are the current mainstay efforts for preventing and combating multidrug-resistant bacterial infections.