Effects of metal ions on stability and activity of hyperthermophilic pyrolysin and further stabilization of this enzyme by modification of a Ca2+-binding site

Biochemical characterization of purified phytase produced from Aspergillus awamori AFE1 associated with the gastrointestinal tract of longhorn beetle (Cerambycidae latreille)

The need for industrially and biotechnologically significant enzymes, such as phytase, is expanding daily as a result of the increased use of these enzymes in a variety of operations, including the manufacture of food, animal feed, and poultry feed. This study sought to characterize purified phytase from A. awamori AFE1 isolated from longhorn beetle for its prospect in industrial applications. Ammonium sulfate precipitation, ion-exchange chromatography, and gel-filtration chromatography were used to purify the crude enzyme obtained from submerged fermentation using phytase-producing media, and its physicochemical characteristics were examined. The homogenous 46.8-kDa phytase showed an 8.1-fold purification and 40.7% recovery. At 70 C and pH 7, the optimum phytase activity was noted. At acidic pH 4-6 and alkaline pH 8-10, it likewise demonstrated relative activity of 88-95% and 67-88%, respectively. It showed 67-70% residual activity between 30 and 70 C after 40 min, and 68-94% residual activity between pH 2 and 12 after 2 h. The presence of Hg+, Mg2+, and Al3+ significantly decreased the enzymatic activity, whereas Ca2+ and Cu2+ enhanced it. Ascorbic acid increased the activity of the purified enzyme, whereas ethylenediaminetetraacetic acid (EDTA) and mercaptoethanol inhibited it. The calculated values for Km and Vmax were 55.4 mM and1.99 μmol/min/mL respectively. A. awamori phytase, which was isolated from a new source, showed unique and remarkable qualities that may find use in industrial operations such as feed pelleting and food processing.

Prediction of key amino acids of Salmonella phage endolysin LysST-3 and detection of its mutants' activity

Salmonella Typhimurium, a zoonotic pathogen, causes systemic and localized infection. The emergence of drug-resistant S. Typhimurium has increased; treating bacterial infections remains challenging. Phage endolysins derived from phages have a broader spectrum of bacteriolysis and better bacteriolytic activity than phages, and are less likely to induce drug resistance than antibiotics. LysST-3, the endolysin of Salmonella phage ST-3, was chosen in our study for its high lytic activity, broad cleavage spectrum, excellent bioactivity, and moderate safety profile. LysST-3 is a promising antimicrobial agent for inhibiting the development of drug resistance in Salmonella. The aim of this study is to investigate the molecular characteristics of LysST-3 through the prediction of key amino acid sites of LysST-3 and detection of its mutants' activity. We investigated its lytic effect on Salmonella and identified its key amino acid sites of interaction with substrate. LysST-3 may be a Ca2+, Mg2+ - dependent metalloenzyme. Its concave structure of the bottom "gripper" was found to be an important part of its amino acid active site. We identified its key sites (29P, 30T, 86D, 88 L, and 89 V) for substrate binding and activity using amino acid-targeted mutagenesis. Alterations in these sites did not affect protein secondary structure, but led to a significant reduction in the cleavage activity of the mutant proteins. Our study provides a basis for phage endolysin modification to target drug-resistant bacteria. Identifying the key amino acid site of the endolysin LysST-3 provides theoretical support for the functional modification of the endolysin and the development of subsequent effective therapeutic solutions.

Identification and biochemical characterization of a heteromeric cis-prenyltransferase from the thermophilic archaeon Archaeoglobus fulgidus

cis-Prenyltransferases (cPTs) form linear polyprenyl pyrophosphates, the precursors of polyprenyl or dolichyl phosphates that are essential for cell function in all living organisms. Polyprenyl phosphate serves as a sugar-carrier for pesptidoglycan cell wall synthesis in bacteria, a role which dolichyl phosphate performs analogously for protein glycosylation in eukaryotes and archaea. Bacterial cPTs are characterized by their homodimeric structure, while cPTs from eukaryotes usually require two distantly homologous subunits for enzymatic activity. This study identifies the subunits of heteromeric cPT, Af1219 and Af0707, from a thermophilic sulfur-reducing archaeon, Archaeoglobus fulgidus. Both subunits are indispensable for cPT activity, and their protein-protein interactions were demonstrated by a pulldown assay. Gel filtration chromatography and chemical cross-linking experiments suggest that Af1219 and Af0707 likely form a heterotetramer complex. Although this expected subunit composition agrees with a reported heterotetrameric structure of human hCIT/NgBR cPT complex, the similarity of the quaternary structures is likely a result of convergent evolution.

Biochemical Characterization of Cellulase From Bacillus subtilis Strain and its Effect on Digestibility and Structural Modifications of Lignocellulose Rich Biomass

Microbial cellulases have become the mainstream biocatalysts due to their complex nature and widespread industrial applications. The present study reports the partial purification and characterization of cellulase from Bacillus subtilis CD001 and its application in biomass saccharification. Out of four different substrates, carboxymethyl cellulose, when amended as fermentation substrate, induced the highest cellulase production from B. subtilis CD001. The optimum activity of CMCase, FPase, and amylase was 2.4 U/ml, 1.5 U/ml, and 1.45 U/ml, respectively. The enzyme was partially purified by (NH₄)₂SO₄ precipitation and sequenced through LC-MS/MS. The cellulase was found to be approximately 55 kDa by SDS-PAGE and capable of hydrolyzing cellulose, as confirmed by zymogram analysis. The enzyme was assigned an accession number AOR98335.1 and displayed 46% sequence homology with 14 peptide-spectrum matches having 12 unique peptide sequences. Characterization of the enzyme revealed it to be an acidothermophilic cellulase, having an optimum activity at pH 5 and a temperature of 60°C. Kinetic analysis of partially purified enzyme showed the Km and Vmax values of 0.996 mM and 1.647 U/ml, respectively. The enzyme activity was accelerated by ZnSO_4, MnSO_4, and MgSO_4, whereas inhibited significantly by EDTA and moderately by β-mercaptoethanol and urea. Further, characterization of the enzyme saccharified sugarcane bagasse, wheat straw, and filter paper by SEM, ATR-FTIR, and XRD revealed efficient hydrolysis and structural modifications of cellulosic materials, indicating the potential industrial application of the B. subtilis CD001 cellulase. The findings demonstrated the potential suitability of cellulase from B. subtilis CD001 for use in current mainstream biomass conversion into fuels and other industrial processes.

Maturation process and characterization of a novel thermostable and halotolerant subtilisin-like protease with high collagenolytic but low gelatinolytic activity

Enzymatic degradation of collagen is of great industrial and environmental significance; however, little is known about thermophile-derived collagenolytic proteases. Here, we report a novel collagenolytic protease (TSS) from thermophilic Brevibacillus sp. WF146. The TSS precursor comprises a signal peptide, an N-terminal propeptide, a subtilisin-like catalytic domain, a β-jelly roll (βJR) domain, and a prepeptidase C-terminal (PPC) domain. The maturation of TSS involves a stepwise autoprocessing of the N-terminal propeptide and the PPC domain, and the βJR rather than the PPC domain is necessary for correct folding of the enzyme. Purified mature TSS displayed optimal activity at 70°C and pH 9.0, a half-life of 1.5 h at 75°C, and an increased thermostability with rising salinity up to 4 M. TSS possesses an increased number of surface acidic residues and ion pairs, as well as four Ca 2+ -binding sites, which contribute to its high thermostability and halotolerance. At high temperatures, TSS exhibited high activity toward insoluble type I collagen and azocoll, but showed a low gelatinolytic activity, with a strong preference for Arg and Gly at the P1 and P1’ positions, respectively. Both the βJR and PPC domains could bind but not swell collagen, and thus facilitate TSS-mediated collagenolysis via improving the accessibility of the enzyme to the substrate. Additionally, TSS has the ability to efficiently degrade fish scale collagen at high temperatures.

IMPORTANCE

Proteolytic degradation of collagen at high temperatures has the advantages of increasing degradation efficiency and minimizing the risk of microbial contamination. Reports on thermostable collagenolytic proteases are limited, and their maturation and catalytic mechanisms remain to be elucidated. Our results demonstrate that the thermophile-derived TSS matures in an autocatalytic manner, and represents one of the most thermostable collagenolytic proteases reported so far. At elevated temperatures, TSS prefers hydrolyzing insoluble heat-denatured collagen rather than gelatin, providing new insight into the mechanism of collagen degradation by thermostable collagenolytic proteases. Moreover, TSS has the potential to be used in recycling collagen-rich wastes such as fish scales.

Thermostable cellulose saccharifying microbial enzymes: Characteristics, recent advances and biotechnological applications

Cellulases play a promising role in the bioconversion of renewable lignocellulosic biomass into fermentable sugars which are subsequently fermented to biofuels and other value-added chemicals. Besides biofuel industries, they are also in huge demand in textile, detergent, and paper and pulp industries. Low titres of cellulase production and processing are the main issues that contribute to high enzyme cost. The success of ethanol-based biorefinery depends on high production titres and the catalytic efficiency of cellulases functional at elevated temperatures with acid/alkali tolerance and the low cost. In view of their wider application in various industrial processes, stable cellulases that are active at elevated temperatures in the acidic-alkaline pH ranges, and organic solvents and salt tolerance would be useful. This review provides a recent update on the advances made in thermostable cellulases. Developments in their sources, characteristics and mechanisms are updated. Various methods such as rational design, directed evolution, synthetic & system biology and immobilization techniques adopted in evolving cellulases with ameliorated thermostability and characteristics are also discussed. The wide range of applications of thermostable cellulases in various industrial sectors is described.

Biochemical characterization of a low salt-adapted extracellular protease from the extremely halophilic archaeon Halococcus salifodinae

Extracellular proteases from haloarchaea can expand the application fields of proteases. Exploring novel robust proteases is of great importance. An extracellular protease HlyA from Halococcus salifodinae was obtained by heterologous expression, affinity chromatography, in vitro refolding and gel filtration chromatography. Its activity was optimal at 45 °C, pH 9.0 and 1.5-2 M NaCl. Interestingly, although HlyA was from an extremely halophilic archaeon, it retained >75% of maximal activity in a broad NaCl concentration of 0.5-4 M. It displayed relatively stable activities over a wide range of temperature, pH and salinity. Thus, HlyA exhibited good temperature, pH and especially, salinity tolerance. Ca²⁺, Mg²⁺ and Sr²⁺ significantly enhanced the protease activity. HlyA activity was completely inhibited by phenylmethanesulfonyl fluoride (PMSF), suggesting it is a serine protease. HlyA showed good tolerance to some surfactants and organic solvents. The K_m and V_max values of HlyA for azocasein were calculated to be 0.72 mM and 21.98 U/μg, respectively. HlyA was able to effectively degrade several protein substrates, including bovine hemoglobin, casein and azocasein. Generally, HlyA from the extremely halophilic archaeon Hcc. salifodinae is an alkaliphilic and low salt-adapted halolysin with high activity, thus representing an attractive candidate for various industrial uses.

A highly efficient protein degradation system in Bacillus sp. CN2: a functional-degradomics study

A novel protease-producing Bacillus sp. CN2 isolated from chicken manure composts exhibited a relatively high proteolytic specific activity. The strain CN2 degradome consisted of at least 149 proteases and homolog candidates, which were distributed into 4 aspartic, 30 cysteine, 55 metallo, 56 serine, and 4 threonine proteases. Extracellular proteolytic activity was almost completely inhibited by PMSF (phenylmethylsulfonyl fluoride) rather than o-P, E-64, or pepstatin A, suggesting that strain CN2 primarily secreted serine protease. More importantly, analysis of the extracellular proteome of strain CN2 revealed the presence of a highly efficient protein degradation system. Three serine proteases of the S8 family with different active site architectures firstly fragmented protein substrates which were then degraded to smaller peptides by a M4 metalloendopeptidase that prefers to degrade hydrophobic peptides and by a S13 carboxypeptidase. Those enzymes acted synergistically to degrade intact substrate proteins outside the cell. Furthermore, highly expressed sequence-specific intracellular aminopeptidases from multiple families (M20, M29, and M42) accurately degraded peptides into oligopeptides or amino acids, thus realizing the rapid acquisition and utilization of nitrogen sources. In this paper, a systematic study of the functional-degradome provided a new perspective for understanding the complexity of the protease hydrolysis system of Bacillus, and laid a solid foundation for further studying the precise degradation of proteins with the cooperative action of different family proteases. KEY POINTS: • Bacillus sp. CN2 has relatively high proteolytic specific activity. • Bacillus sp. CN2 harbors a highly efficient protein degradation system. • The site-specific endopeptidases were secreted extracellular, while the sequence-specific aminopeptidases played a role in the cell.

Structural insight into the carboxylesterase BioH from Klebsiella pneumoniae

The BioH carboxylesterase which is a typical α/β-hydrolase enzyme involved in biotin synthetic pathway in most bacteria. BioH acts as a gatekeeper and blocks the further elongation of its substrate. In the pathogen Klebsiella pneumoniae, BioH plays a critical role in the biosynthesis of biotin. To better understand the molecular function of BioH, we determined the crystal structure of BioH from K. pneumoniae at 2.26 Å resolution using X-ray crystallography. The structure of KpBioH consists of an α-β-α sandwich domain and a cap domain. B-factor analysis revealed that the α-β-α sandwich domain is a rigid structure, while the loops in the cap domain shows the structural flexibility. The active site of KpBioH contains the catalytic triad (Ser82-Asp207-His235) on the interface of the α-β-α sandwich domain, which is surrounded by the cap domain. Size exclusion chromatography shows that KpBioH prefers the monomeric state in solution, whereas two-fold symmetric dimeric formation of KpBioH was observed in the asymmetric unit, the conserved Cys31-based disulfide bonds can maintain the irreversible dimeric formation of KpBioH. Our study provides important structural insight for understanding the molecular mechanisms of KpBioH and its homologous proteins.

Quantifying bacterial cell lysis using GFP based fluorimetric assay

Quantitative measurement of cell lysis against a given microbial strain is essential to calculate the antimicrobial potency of protein/peptide/nanomaterial based formulations. Fluorescence spectroscopy based measurements offer precise quantification of a process via selected flurophore emission profile. In this context, we elucidate a reliable and robust green fluorescent protein (GFP) based fluorescence spectroscopy protocol to evaluate the antimicrobial activity of proteins. The technique is based on the fact that the intensity of the GFP emission released from cells correlates with cell lysis and henceforth the antimicrobial potential of the chosen agent. The technique was demonstrated with two different families of bacteriophage endolysins (T7 and T4 endolysins) using GFP expressing E. coli cells. The GFP based method allowed the absolute quantification of T4 and T7 endolysins cell lysis characteristics at different pH, salt concentrations, and metal ions. The results obtained from GFP based fluorimetric assay were substantiated with turbidimetric assay and fluorescence microscopy. This fluorimetric method in conjugation with different GFP expressing microbial strains and antimicrobial agents can be efficiently applied as a quantification technique to precisely measure cell lysis.

Structural dynamics behind variants in pyrazinamidase and pyrazinamide resistance

Pyrazinamide (PZA) is an important component of first-line anti-tuberculosis (anti-TB) drugs. The anti-TB agent is activated into an active form, pyrazinoic acid (POA), by Mycobacterium tuberculosis (MTB) pncA gene encoding pyrazinamidase (PZase). The major cause of PZA-resistance has been associated with mutations in the pncA gene. We have detected several novel mutations including V131F, Q141P, R154T, A170P, and V180F (GeneBank Accession No. MH461111) in the pncA gene of PZA-resistant isolates during PZA drug susceptibility testing followed by pncA gene sequencing. Here, we investigated molecular mechanism of PZA-resistance by comparing the results of experimental and molecular dynamics. The mutants (MTs) and wild type (WT) PZase structures in apo and complex with PZA were subjected to molecular dynamic simulations (MD) at the 40 ns. Multiple factors, including root mean square deviations (RMSD), binding pocket, total energy, dynamic cross correlation, and root mean square fluctuations (RMSF) of MTs and WT were compared. The MTs attained a high deviation and fluctuation compared to WT. Binding pocket volumes of the MTs, were found, lower than the WT, and the docking scores were high than WT while shape complementarity scores were lower than that of the WT. Residual motion in MTs are seemed to be dominant in anti-correlated motion. Mutations at locations, V131F, Q141P, R154T, A170P, and V180F, might be involved in the structural changes, possibly affecting the catalytic property of PZase to convert PZA into POA. Our study provides useful information that will enhance the understanding for better management of TB. AbbreviationsDSTdrug susceptibility testingΔelecelectrostatic energyLJLowenstein-Jensen mediumMGITmycobacterium growth indicator tubesMTsmutantsMDmolecular dynamic simulationsMTBMycobacterium tuberculosisNALC-NaOHN-acetyl-l-cysteine-sodium hydroxideNIHNational Institutes of HealthNPTamount of substance (N), pressure (P) temperature (T)NVTmoles (N), volume (V) temperature (T)PZasepyrazinamidaseΔpspolar solvation energyPTRLProvincial Tuberculosis Reference LaboratoryRMSDroot mean square deviationsRMSFroot mean square fluctuationsΔSASAsolvent accessible surface area energyTBtuberculosisGTotaltotal binding free energyΔvdWVan der Waals energyWTwild typeCommunicated by Ramaswamy H. Sarma.

Distinct roles of an ionic interaction holding an alpha-helix with catalytic Asp and a beta-strand with catalytic His in a hyperthermophilic esterase EstE1 and a mesophilic esterase rPPE

An ionic interaction that holds an α-helix and a β-strand on which catalytic Asp and His residues are located, respectively, is conserved in a hyperthermophilic esterase EstE1 (optimum temperature 70 °C) and a mesophilic esterase rPPE (optimum temperature 50 °C). We investigated the role of an ionic interaction between E258 and R275 in EstE1 and that between E263 and R280 in rPPE in active-site stability of serine esterases adapted to different temperatures. Ala substitutions caused a 5-10 °C decrease in the optimum temperature of both EstE1 and rPPE mutants. Surprisingly, disruption of the ionic interaction caused larger effects on the conformational flexibility of EstE1 mutants despite their rigid structures, whereas the disruption had fewer effects on the thermal stability of EstE1 mutants at 60-70 °C, as the structure of EstE1 was adapted to high temperatures. In contrast, mesophilic rPPE mutants showed dramatic decreases in thermal stability at 40-50 °C, but less changes in conformational flexibility because of their inherently flexible structures. The results of this study suggest that the ionic interaction between the α-helix with catalytic Asp and the β-strand with catalytic His plays an important role in the active-site conformation of EstE1 and rPPE, with larger effects on the conformational flexibility of hyperthermophilic EstE1 and the thermal stability of mesophilic rPPE.

Phospholipase D encapsulated into metal-surfactant nanocapsules for enhancing biocatalysis in a two-phase system

Methods for enhancing enzyme activities in two-phase systems are getting more attention. Phospholipase D (PLD) was successfully encapsulated into metal-surfactant nanocapsules (MSNCs) using a one-pot self-assembly technique in an aqueous solution. The highest yield for the production of high-value phosphatidylserine (PS) from low-value phosphatidylcholine (PC) in the two-phase system was achieved by encapsulating PLD into MSNCs formed from Ca²⁺ which gave an enzyme activity that was 133.6% of that of free PLD. The PLD@MSNC transformed the two-phase system into an emulsion phase system and improved the organic solvent tolerance, pH and thermal stabilities as well as the storage stability and reusability of the enzyme. Under optimal conditions, PLD@MSNC generated 91.9% PS over 8 h in the two-phase system, while free PLD generated only 77.5%.

PLD@MSNC transforms a two-phase system into an emulsion phase, and enhances transphosphatidylation.

Production, purification and biochemical characterization of an exo-polygalacturonase from Aspergillus niger MTCC 478 suitable for clarification of orange juice

Polygalacturonases (PG) represent an important member of pectinases group of enzymes with immense industrial applications. A fungal strain Aspergillus niger MTCC478 was used for the production of polygalacturonase both under submerged and solid-state fermentation condition. Further its production was optimized under solid-state fermentation condition with media comprising of wheat bran and tea extract. Purification of an exo-PG was achieved by acetone precipitation (60-90%) and CM-cellulose column chromatography revealing 15.28-fold purification with a specific activity of 33.47 U/mg protein and 1.2% yield. A relative molecular mass of purified PG was approximately 124.0 kDa. The pH and temperature optimum was found to be 4 and 50 °C, respectively. The k cat and K m value for degradation of PGA by the purified enzyme was found to be 194 s-1 and 2.3 mg/mL, respectively. Cu2+ was found to enhance the PG activity while Ag+ completely inhibited the enzyme activity. The application of the purified PG in orange juice clarification was elucidated.

Four Inserts within the Catalytic Domain Confer Extra Stability and Activity to Hyperthermostable Pyrolysin from Pyrococcus furiosus

Pyrolysin from the hyperthermophilic archaeon Pyrococcus furiosus is the prototype of the pyrolysin family of the subtilisin-like serine protease superfamily (subtilases). It contains four inserts (IS147, IS29, IS27, and IS8) of unknown function in the catalytic domain. We performed domain deletions and showed that three inserts are either essential (IS147 and IS27) or important (IS8) for efficient maturation of pyrolysin at high temperatures, whereas IS29 is dispensable. The large insert IS147 contains Ca3 and Ca4, two calcium-binding Dx[DN]xDG motifs that are conserved in many pyrolysin-like proteases. Mutagenesis revealed that the Ca3 site contributes to enzyme thermostability and the Ca4 site is necessary for pyrolysin to fold into a maturation-competent conformation. Mature insert-deletion variants were characterized and showed that IS29 and IS8 contribute to enzyme activity and stability, respectively. In the presence of NaCl, pyrolysin undergoes autocleavage at two sites: one within IS29 and the other in IS27 Disrupting the ion pairs in IS27 and IS8 induces autocleavage in the absence of salts. Interestingly, autocleavage products combine noncovalently to form an active, nicked enzyme that is resistant to SDS and urea denaturation. Additionally, a single mutation in IS29 increases resistance to salt-induced autocleavage and further increases enzyme thermostability. Our results suggest that these extra structural elements play a crucial role in adapting pyrolysin to hyperthermal environments.IMPORTANCE Pyrolysin-like proteases belong to the subtilase superfamily and are characterized by large inserts and long C-terminal extensions; however, the role of the inserts in enzyme function is unclear. Our results demonstrate that four inserts in the catalytic domain of hyperthermostable pyrolysin contribute to the folding, maturation, stability, and activity of the enzyme at high temperatures. The modification of extra structural elements in pyrolysin-like proteases is a promising strategy for modulating global structure stability and enzymatic activity of this class of protease.