Organic-Solvent-Tolerant Carboxylic Ester Hydrolases for Organic Synthesis

Solvent concentration at 50% protein unfolding may reform enzyme stability ranking and process window identification

As water miscible organic co-solvents are often required for enzyme reactions to improve e.g., the solubility of the substrate in the aqueous medium, an enzyme is required which displays high stability in the presence of this co-solvent. Consequently, it is of utmost importance to identify the most suitable enzyme or the appropriate reaction conditions. Until now, the melting temperature is used in general as a measure for stability of enzymes. The experiments here show, that the melting temperature does not correlate to the activity observed in the presence of the solvent. As an alternative parameter, the concentration of the co-solvent at the point of 50% protein unfolding at a specific temperature T in shortc U 50 T is introduced. Analyzing a set of ene reductases,c U 50 T is shown to indicate the concentration of the co-solvent where also the activity of the enzyme drops fastest. Comparing possible rankings of enzymes according to melting temperature andc U 50 T reveals a clearly diverging outcome also depending on the specific solvent used. Additionally, plots ofc U 50 versus temperature enable a fast identification of possible reaction windows to deduce tolerated solvent concentrations and temperature.

Biocatalytic Heteroaromatic Amide Formation in Water Enabled by a Catalytic Tetrad and Two Access Tunnels

The amide moiety belongs to the most common motives in pharmaceutical chemistry, present in many prescribed small-molecule pharmaceuticals. Methods for its manufacture are still in high demand, especially using water/buffer as a solvent and avoiding stoichiometric amounts of activation reagents. Herein, we identified from a library of lipases/esterases/acyltransferases and variants thereof a lipase originating from Sphingomonas sp. HXN-200 (SpL) able to form amides in aqueous solution starting from a broad scope of sterically demanding heteroaromatic ethyl esters as well as aliphatic amines, reaching isolated yields up to 99% on preparative scale and space time yields of up to 864 g L-1 d-1; thus, in selected cases, the amide was formed within minutes. The enzyme features an aspartate next to the canonical serine of the catalytic triad, which was essential for amide formation. Furthermore, the enzyme structure revealed two tunnels to the active site, presumably one for the ester and one for the amine, which permit the bringing together of the sterically demanding heteroaromatic esters and the amine in the active site. This work shows that biocatalytic amide formation starting from various five- and six-membered heteroaromatic ethyl esters in the buffer can serve as a platform for preparative amide synthesis.

Halopseudomonas species: Cultivation and molecular genetic tools

The Halopseudomonas species, formerly classified as Pseudomonas pertucinogena lineage, form a unique phylogenetic branch within the Pseudomonads. Most strains have recently been isolated from challenging habitats including oil- or metal-polluted sites, deep sea, and intertidal zones, suggesting innate resilience to physical and chemical stresses. Despite their comparably small genomes, these bacteria synthesise several biomolecules with biotechnological potential and a role in the degradation of anthropogenic pollutants has been suggested for some Halopseudomonads. Until now, these bacteria are not readily amenable to existing cultivation and cloning methods. We addressed these limitations by selecting four Halopseudomonas strains of particular interest, namely H. aestusnigri, H. bauzanensis, H. litoralis, and H. oceani to establish microbiological and molecular genetic methods. We found that C4 -C10 dicarboxylic acids serve as viable carbon sources in both complex and mineral salt cultivation media. We also developed plasmid DNA transfer protocols and assessed vectors with different origins of replication and promoters inducible with isopropyl-β-d-thiogalactopyranoside, l-arabinose, and salicylate. Furthermore, we have demonstrated the simultaneous genomic integration of expression cassettes into one and two attTn7 integration sites. Our results provide a valuable toolbox for constructing robust chassis strains and highlight the biotechnological potential of Halopseudomonas strains.

Enhanced Activity and Stability of an Acetyl Xylan Esterase in Hydrophilic Alcohols through Site-Directed Mutagenesis

Current demands for the development of suitable biocatalysts showing high process performance is stimulated by the need to replace current chemical synthesis with cleaner alternatives. A drawback to the use of biocatalysts for unique applications is their low performance in industrial conditions. Hence, enzymes with improved performance are needed to achieve innovative and sustainable biocatalysis. In this study, we report the improved performance of an engineered acetyl xylan esterase (BaAXE) in a hydrophilic organic solvent. The structure of BaAXE was partitioned into a substrate-binding region and a solvent-affecting region. Using a rational design approach, charged residues were introduced at protein surfaces in the solvent-affecting region. Two sites present in the solvent-affecting region, A12D and Q143E, were selected for site-directed mutagenesis, which generated the mutants MUT12, MUT143 and MUT12-143. The mutants MUT12 and MUT143 reported lower Km (0.29 mM and 0.27 mM, respectively) compared to the wildtype (0.41 mM). The performance of the mutants in organic solvents was assessed after enzyme incubation in various strengths of alcohols. The mutants showed improved activity and stability compared to the wild type in low strengths of ethanol and methanol. However, the activity of MUT143 was lost in 40% methanol while MUT12 and MUT12-143 retained over 70% residual activity in this environment. Computational analysis links the improved performance of MUT12 and MUT12-143 to novel intermolecular interactions that are absent in MUT143. This work supports the rationale for protein engineering to augment the characteristics of wild-type proteins and provides more insight into the role of charged residues in conferring stability.

Assigning Functions of Unknown Enzymes by High-Throughput Enzyme Characterization

The discovery of new enzymes is strongly enabled by the implementation of high-throughput screening methods to detect enzymatic activity in single organisms or clone expression libraries, or to benchmark their performances against known prototypes. In this chapter, a number of methods, applicable at high-throughput scale, are described that allow the screening and characterization of enzymes relevant to biotechnology, particularly, ester-hydrolases (esterases, lipases, phospholipases, and polyester hydrolases).

Application of Milk Permeate as an Inducer for the Production of Microbial Recombinant Lipolytic Enzymes

Recombinantly produced enzymes are applied in many fields, ranging from medicine to food and nutrition, production of detergents, textile, leather, paper, pulp, and plastics. Thus, the cost-effectiveness of recombinant enzyme synthesis is an important issue in biotechnological industry. Isopropyl-β-D-thiogalactoside (IPTG), an analog of lactose, is currently the most widely used chemical agent for the induction of recombinant enzyme synthesis. However, the use of IPTG can lead to production of toxic elements and can introduce physiological stress to cells. Thus, this study aims to find a simpler, cheaper, and safer way to produce recombinant enzymes. In this study, production of several previously designed recombinant lipolytic enzymes (GDEst-95 esterase, GD-95RM lipase, fused GDEst-lip lipolytic enzyme, and putative cutinase Cut+SP from Streptomyces scabiei 87.22) is induced in E. coli BL21 (DE3) using 4 mM milk permeate, a type of waste of the milk manufacturing process possessing >82% lactose. The SDS-PAGE analysis clearly indicates synthesis of all target enzymes during a 2–12 h post-induction timeframe. Further investigation of GDEst-95, GD-95RM, GDEst-lip, and Cut+SP biocatalysts was carried out spectrophotometrically and using zymography method, confirming production of fully active enzymes.

Biocatalysis for the asymmetric synthesis of Active Pharmaceutical Ingredients (APIs): this time is for real

INTRODUCTION

Biocatalysis has emerged as a powerful and useful strategy for the synthesis of active pharmaceutical ingredients (APIs). The outstanding developments in molecular biology techniques allow nowadays the screening, large-scale production, and designing of biocatalysts, adapting them to desired reactions. Many enzymes can perform reactions both in aqueous and non-aqueous media, broadening even further the opportunities to integrate them in complex pharmaceutical multi-step syntheses.

AREAS COVERED

This paper showcases several examples of biocatalysis in the pharmaceutical industry, covering examples of different enzymes, such as lipases, oxidoreductases, and transaminases, to deliver active drugs through complex synthetic routes. Examples are critically discussed in terms of reaction conditions, motivation for using an enzyme, and how biocatalysts can be integrated in multi-step syntheses. When possible, biocatalytic routes are benchmarked with chemical reactions.

EXPERT OPINION

The reported enzymatic examples are performed with high substrate loadings (>100 g L^-1) and with excellent selectivity, making them inspiring strategies for present and future industrial applications. The combination of powerful molecular biology techniques with the needs of the pharmaceutical industry can be aligned, creating promising platforms for synthesis under more sustainable conditions.

Design of fusion enzymes for biocatalytic applications in aqueous and non-aqueous media

Biocatalytic cascades play a fundamental role in sustainable chemical synthesis. Fusion enzymes are one of the powerful toolboxes to enable the tailored combination of multiple enzymes for efficient cooperative cascades. Especially, this approach offers a substantial potential for the practical application of cofactor-dependent oxidoreductases by forming cofactor self-sufficient cascades. Adequate cofactor recycling while keeping the oxidized/reduced cofactor in a confined microenvironment benefits from the fusion fashion and makes the use of oxidoreductases in harsh non-aqueous media practical. In this mini-review, we have summarized the application of various fusion enzymes in aqueous and non-aqueous media with a focus on the discussion of linker design within oxidoreductases. The design and properties of the reported linkers have been reviewed in detail. Besides, the substrate loadings in these studies have been listed to showcase one of the key limitations (low solubility of hydrophobic substrates) of aqueous biocatalysis when it comes to efficiency and economic feasibility. Therefore, a straightforward strategy of applying non-aqueous media has been briefly discussed while the potential of using the fusion oxidoreductase of interest in organic media was highlighted.

Relationship between Structure and Antibacterial Activity of α-Aminophosphonate Derivatives Obtained via Lipase-Catalyzed Kabachnik-Fields Reaction

We reported a new method dealing with the synthesis of novel pharmacologically relevant α-aminophosphonate derivatives via a lipase-catalyzed Kabachnik−Fields reaction with yields of up to 93%. The advantages of this protocol are excellent yields, mild reaction conditions, low costs, and sustainability. The developed protocol is applicable to a range of H-phosphites and organic amines, providing a wide substrate scope. A new class of α-aminophosphonate analogues possessing P-chiral centers was also synthesized. The synthesized compounds were characterized on the basis of their antimicrobial activities against E. coli. The impact of the various alkoxy groups on antimicrobial activity was demonstrated. The crucial role of the substituents, located at the aromatic rings in the phenylethyloxy and benzyloxy groups, on the inhibitory action against selected pathogenic E. coli strains was revealed. The observed results are especially important because of increasing resistance of bacteria to various drugs and antibiotics.

Characterization of an Aspergillus niger for Efficient Fatty Acid Ethyl Ester Synthesis in Aqueous Phase and the Molecular Mechanism

Fatty acid ethyl esters are important flavor chemicals in strong-flavor baijiu. Microorganisms are the main contributors to ester synthesis during baijiu manufacture. However, the ester synthesis was unstable between batches. This was owing to a limited knowledge of the mechanisms for ester synthesis by microorganisms. In this work, a fatty acid ethyl ester synthesizing Aspergillus niger strain CGMCC (China General Microbiological Culture Collection) 3.4309 was identified. The conversion ratios of ethyl valerate, ethyl caproate, ethyl caprylate, and ethyl caprate were 7.87, 29.20, 94.80, and 85.20%, respectively, under the optimized conditions. A comparison of transcriptomes under the initial and optimized ester synthetic conditions indicated that 23 genes were upregulated in transcription level and encoded enzymes with potential abilities for ester synthesis. Eleven of the enzymes were expressed, and three of them, numbered An605, An1097, and An3131, showed the ability to catalyze fatty acid ethyl ester synthesis under aqueous phase, with capric acid as the preferred substrate. The possible enzymatic catalytic mechanism was proposed based on homology modeling and molecular docking. This study reported for the first time that A. niger showed the ability to efficiently catalyze the synthesis of short- and medium-chain fatty acid ethyl esters in aqueous phase, identified the key enzymes, and analyzed the basic enzymatic properties. This is helpful to promote the application of related microorganisms and enzyme resources in the baijiu industry.

Gene mining, codon optimization and analysis of binding mechanism of an aldo-keto reductase with high activity, better substrate specificity and excellent solvent tolerance

The biosynthesis of chiral alcohols has important value and high attention. Aldo–keto reductases (AKRs) mediated reduction of prochiral carbonyl compounds is an interesting way of synthesizing single enantiomers of chiral alcohols due to the high enantio-, chemo- and regioselectivity of the enzymes. However, relatively little research has been done on characterization and apply of AKRs to asymmetric synthesis of chiral alcohols. In this study, the AKR from Candida tropicalis MYA-3404 (C. tropicalis MYA-3404), was mined and characterized. The AKR shown wider optimum temperature and pH. The AKR exhibited varying degrees of catalytic activity for different substrates, suggesting that the AKR can catalyze a variety of substrates. It is worth mentioning that the AKR could catalytic reduction of keto compounds with benzene rings, such as cetophenone and phenoxyacetone. The AKR exhibited activity on N,N-dimethyl-3-keto-3-(2-thienyl)-1-propanamine (DKTP), a key intermediate for biosynthesis of the antidepressant drug duloxetine. Besides, the AKR still has high activity whether in a reaction system containing 10%-30% V/V organic solvent. What’s more, the AKR showed the strongest stability in six common organic solvents, DMSO, acetonitrile, ethyl acetate, isopropanol, ethanol, and methanol. And, it retains more that 70% enzyme activity after 6 hours, suggesting that the AKR has strong solvent tolerance. Furthermore, the protein sequences of the AKR and its homology were compared, and a 3D model of the AKR docking with coenzyme NADPH were constructed. And the important catalytic and binding sites were identified to explore the binding mechanism of the enzyme and its coenzyme. These properties, predominant organic solvents resistance and extensive substrate spectrum, of the AKR making it has potential applications in the pharmaceutical field.

Environmental role of aromatic carboxylesterases

The carboxylesterases (EC 3.1.1.x) are widely distributed and form an important yet diverse group of hydrolases catalysing the ester bond cleavage in a variety of substrates. Besides acting on plant cell wall components like cutin, tannin and feruloyl esters, they are often the first line of defence to metabolize drugs, xenobiotics, pesticides, insecticides and plastic. But for the promiscuity of some carboxylesterases and cutinases, very few enzymes act exclusively on aromatic carboxylic acid esters. Infrequent occurrence of aromatic carboxylesterases suggests that aromatic carboxylesters are inherently more difficult to hydrolyse than the regular carboxylesters because of both steric and polar effects. Naturally occurring aromatic carboxylesters were rare before the anthropogenic activity augmented their environmental presence and diversity. An appraisal of the literature shows that the hydrolysis of aromatic carboxylic esters is a uniquely difficult endeavour and hence deserves special attention. Enzymes to hydrolyse such esters are evolving rapidly in nature. Very few such enzymes are known and they often display much lower catalytic efficiencies. Obviously, the esters of aromatic carboxylic acids, including polyethylene terephthalate waste, pose an environmental challenge. In this review, we highlight the uniqueness of aromatic carboxylesters and then underscore the importance of relevant carboxylesterases.

Temperature-resistant and solvent-tolerant lipases as industrial biocatalysts: Biotechnological approaches and applications

The development of new biocatalytic systems to replace the chemical catalysts, with suitable characteristics in terms of efficiency, stability under high temperature reactions and in the presence of organic solvents, reusability, and eco-friendliness is considered a very important step to move towards the green processes. From this basis, the use of lipase as a catalyst is highly desired for many industrial applications because it offers the reactions in which could be used, stability in harsh conditions, reusability and a greener process. Therefore, the introduction of temperature-resistant and solvent-tolerant lipases have become essential and ideal for industrial applications. Temperature-resistant and solvent-tolerant lipases have been involved in many large-scale applications including biodiesel, detergent, food, pharmaceutical, organic synthesis, biosensing, pulp and paper, textile, animal feed, cosmetics, and leather industry. So, the present review provides a comprehensive overview of the industrial use of lipase. Moreover, special interest in biotechnological and biochemical techniques for enhancing temperature-resistance and solvent-tolerance of lipases to be suitable for the industrial uses.

Effect of chain length and branching on the in vitro metabolism of a series of parabens in human liver S9, human skin S9, and human plasma

Parabens are antimicrobial compounds used as preservatives in cosmetics, foods, and pharmaceuticals. Paraben exposure occurs through a variety of routes including dermal absorption, ingestion, and inhalation. Ester bond hydrolysis has been shown to be the predominant biotransformation for this chemical class. Here we evaluated a series of parabens of increasing alkyl chain length and branching in addition to the aryl side chain of phenyl paraben (PhP). We evaluated the parabens under full Michaelis-Menten (MM) parameters to obtain intrinsic clearance values and found different trends between human liver and skin, which correlate with the predominant esterase enzymes in those matrices, respectively. In liver, where carboxylesterase 1 (CES1) is the predominant esterase enzyme, the shorter chain parabens were more readily metabolized, while in skin, where carboxylesterase 2 (CES2) is the predominant esterase enzyme, the longer chain parabens were more readily metabolized. Alkyl chain branching reduced the hydrolysis rates relative to those for the straight chain compounds, while the addition of a phenyl group, as in PhP, showed an increase in hydrolysis, producing the highest observed hydrolysis rate for skin. These data summarize the structure-metabolism relationship for a series of parabens and contribute to the safety assessment of this class of compounds.

Molecular biology interventions for activity improvement and production of industrial enzymes

Metagenomics and directed evolution technology have brought a revolution in search of novel enzymes from extreme environment and improvement of existing enzymes and tuning them towards certain desired properties. Using advanced tools of molecular biology i.e. next generation sequencing, site directed mutagenesis, fusion protein, surface display, etc. now researchers can engineer enzymes for improved activity, stability, and substrate specificity to meet the industrial demand. Although many enzymatic processes have been developed up to industrial scale, still there is a need to overcome limitations of maintaining activity during the catalytic process. In this article recent developments in enzymes industrial applications and advancements in metabolic engineering approaches to improve enzymes efficacy and production are reviewed.

Microbiota profiling and screening of the lipase active halotolerant yeasts of the olive brine

Searching for novel enzymes that could be active in organic solvents has become an area of interest in recent years. Olive brine naturally provides a suitable environment for the survival of halophilic and acidophilic microorganisms and the resulting genome is thought to be a gene source for determining the halophilic and acidophilic proteins that are active in a non-aqueous organic solvent medium, and so it has been used in several biotechnological and industrial applications. In this study, microbial analysis of natural, cracked green olive brine from the southern region of Turkey has been made by next-generation sequencing of the brine metagenome for the first time in the literature. The number of reads assigned to fungal operational taxonomic units was the highest percentage (73.04%) with the dominant representation of Ascomycota phylum (99% of fungi). Bacterial OTU was 3.56% of the reads and Proteobacteria phylum was 65% of the reads. The lipase production capacity of the yeasts that were grown on the media containing elevated concentrations of NaCl (1-3 M) was determined on a Rhodamine B-including medium. Molecular identification of the selected yeasts was performed and 90% of sequenced yeasts had a high level of similarity with Candida diddensiae, whereas 10% showed similarity to Candida boidinii. The hydrolytic lipase activities using olive oil were analyzed and both yeasts showed cell-bound lipase activity at pH 3.0.

Crystal structures of a novel family IV esterase in free and substrate-bound form

Bacterial lipolytic enzymes of family IV are homologs of the mammalian hormone-sensitive lipases (HSL) and have been successfully used for various biotechnological applications. The broad substrate specificity and ability for enantio-, regio-, and stereoselective hydrolysis are remarkable features of enzymes from this class. Many crystal structures are available for esterases and lipases, but structures of enzyme-substrate or enzyme-inhibitor complexes are less frequent although important to understand the molecular basis of enzyme-substrate interaction and to rationalize biochemical enzyme characteristics. Here, we report on the structures of a novel family IV esterase isolated from a metagenomic screen, which shows a broad substrate specificity. We solved the crystal structures in the apo form and with a bound substrate analogue at 1.35 and 1.81 Å resolution, respectively. This enzyme named PtEst1 hydrolyzed more than 60 out 96 structurally different ester substrates thus being substrate promiscuous. Its broad substrate specificity is in accord with a large active site cavity, which is covered by an α-helical cap domain. The substrate analogue methyl 4-methylumbelliferyl hexylphosphonate was rapidly hydrolyzed by the enzyme leading to a complete inactivation caused by covalent binding of phosphinic acid to the catalytic serine. Interestingly, the alcohol leaving group 4-methylumbelliferone was found remaining in the active site cavity, and additionally, a complete inhibitor molecule was found at the cap domain next to the entrance of the substrate tunnel. This unique situation allowed gaining valuable insights into the role of the cap domain for enzyme-substrate interaction of esterases belonging to family IV. DATABASE: Structural data of PtEst1 are available in the worldwide protein data bank (https://www.rcsb.org) under the accession codes: 6Z68 (apo-PtEst1) and 6Z69 (PtEst1-inhibitor complex).

Discovery and development of a novel short-chain fatty acid ester synthetic biocatalyst under aqueous phase from Monascus purpureus isolated from Baijiu

Short-chain fatty acid esters are important flavor chemicals in Chinese traditional fermented Baijiu. Monascus purpureus was recognized as an important microorganism contributing to ester synthesis. However, the molecular basis for ester synthesis was still lacking. The present work combined genome sequencing, transcriptome sequencing, gene library construction, and enzyme engineering to discover a novel catalyst from M. purpureus (isolated from Baijiu fermentation starter). Enzyme LIP05, belonging to the α/β hydrolase family, was identified to synthesize short-chain fatty acid esters under aqueous phase. After deleting the lid domain of LIP05, the synthesis of ethyl pentanoate, ethyl hexanoate, ethyl octanoate, or ethyl decanoate was achieved. Ethyl octanoate with the highest conversion ratio of 93.7% was obtained with the assistance of ultrasound. The study reveals the molecular basis for synthesizing short-chain fatty acid esters by M. purpureus and will promote the application of the species or the enzyme in food industry.