Use of purified Clostridium difficile spores to facilitate evaluation of health care disinfection regimens

Spores of Clostridioides difficile are toxin delivery vehicles

Clostridioides difficile causes a wide range of intestinal diseases through the action of two main cytotoxins, TcdA and TcdB. Ingested spores germinate in the intestine establishing a population of cells that produce toxins and spores. The pathogenicity locus, PaLoc, comprises several genes, including those coding for TcdA/B, for the holin-like TcdE protein, and for TcdR, an auto-regulatory RNA polymerase sigma factor essential for tcdA/B and tcdE expression. Here we show that tcdR, tcdA, tcdB and tcdE are expressed in a fraction of the sporulating cells, in either the whole sporangium or in the forespore. The whole sporangium pattern is due to protracted expression initiated in vegetative cells by σD, which primes the TcdR auto-regulatory loop. In contrast, the forespore-specific regulatory proteins σG and SpoVT control TcdR production and tcdA/tcdB and tcdE expression in this cell. We detected TcdA at the spore surface, and we show that wild type and ΔtcdA or ΔtcdB spores but not ΔtcdR or ΔtcdA/ΔtcdB spores are cytopathic against HT29 and Vero cells, indicating that spores may serve as toxin-delivery vehicles. Since the addition of TcdA and TcdB enhance binding of spores to epithelial cells, this effect may occur independently of toxin production by vegetative cells.

The impact of orphan histidine kinases and phosphotransfer proteins on the regulation of clostridial sporulation initiation

Sporulation is an important feature of the clostridial life cycle, facilitating survival of these bacteria in harsh environments, contributing to disease transmission for pathogenic species, and sharing common early steps that are also involved in regulating industrially important solvent production by some non-pathogenic species. Initial genomics studies suggested that Clostridia lack the classical phosphorelay that phosphorylates Spo0A and initiates sporulation in Bacillus, leading to the hypothesis that sporulation in Clostridia universally begins when Spo0A is phosphorylated by orphan histidine kinases (OHKs). However, components of the classical Bacillus phosphorelay were recently identified in some Clostridia. Similar Bacillus phosphorelay components have not yet been found in the pathogenic Clostridia or the solventogenic Clostridia of industrial importance. For some of those Clostridia lacking a classical phosphorelay, the involvement of OHKs in sporulation initiation has received support from genetic studies demonstrating the involvement of several apparent OHKs in their sporulation. In addition, several clostridial OHKs directly phosphorylate Spo0A in vitro. Interestingly, there is considerable protein domain diversity among the sporulation-associated OHKs in Clostridia. Further adding to the emergent complexity of sporulation initiation in Clostridia, several candidate OHK phosphotransfer proteins that were OHK candidates were shown to function as phosphatases that reduce sporulation in some Clostridia. The mounting evidence indicates that no single pathway explains sporulation initiation in all Clostridia and supports the need for further study to fully understand the unexpected and biologically fascinating mechanistic diversity of this important process among these medically and industrially important bacteria.

Microscopy methods for Clostridioides difficile

Microscopic technologies including light and fluorescent, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and cryo-electron microscopy have been widely utilized to visualize Clostridioides difficile at the molecular, cellular, community, and structural biology level. This comprehensive review summarizes the microscopy tools (fluorescent and reporter system) in their use to study different aspects of C. difficile life cycle and virulence (sporulation, germination) or applications (detection of C. difficile or use of antimicrobials). With these developing techniques, microscopy tools will be able to find broader applications and address more challenging questions to study C. difficile and C. difficile infection.

Clostridioides difficile infection after extracorporeal membrane oxygenation support for acute myocardial infarction: a case report

Introduction

Restored cardiopulmonary function is efficiently achieved by utilizing extracorporeal membrane oxygenation (ECMO). Nevertheless, the incidence of Clostridioides difficile infection (CDI) associated with ECMO is relatively uncommon.

Case presentation

In this report, we present the case of a 59-year-old male with severe chest pain due to acute myocardial infarction, subsequently necessitating ECMO support. During the first day of hospitalization, pulmonary infections were observed, and piperacillin-tazobactam was prescribed for 7 days at low dosages. However, the patient developed severe diarrhea 4 days later. After ruling out common pathogens, we suspected the occurrence of CDI and performed genetic testing for C. difficile toxin, confirming our diagnosis. The prescription of vancomycin resulted in slight improvement, while fecal microbiota transplantation (FMT) proved to be more effective.

Conclusion

In this case, temporary application of ECMO was applied, and the anti-infective treatment relied on the use of antibiotics at short-term, low-dose, and low CDI risk. Hence, the occurrence of CDI was considered an uncommon event, which may serve as a reference for future cases.

Single-spore germination analyses reveal that calcium released during Clostridioides difficile germination functions in a feedforward loop

Clostridioides difficile infections begin when its metabolically dormant spores germinate in response to sensing bile acid germinants alongside amino acid and divalent cation co-germinants in the small intestine. While bile acid germinants are essential for C. difficile spore germination, it is currently unclear whether both co-germinant signals are required. One model proposes that divalent cations, particularly Ca2+, are essential for inducing germination, while another proposes that either co-germinant class can induce germination. The former model is based on the finding that spores defective in releasing large stores of internal Ca2+ in the form of calcium dipicolinic acid (CaDPA) cannot germinate when germination is induced with bile acid germinant and amino acid co-germinant alone. However, since the reduced optical density of CaDPA-less spores makes it difficult to accurately measure their germination, we developed a novel automated, time-lapse microscopy-based germination assay to analyze CaDPA mutant germination at the single-spore level. Using this assay, we found that CaDPA mutant spores germinate in the presence of amino acid co-germinant and bile acid germinant. Higher levels of amino acid co-germinants are nevertheless required to induce CaDPA mutant spores to germinate relative to WT spores because CaDPA released by WT spores during germination can function in a feedforward loop to potentiate the germination of other spores within the population. Collectively, these data indicate that Ca2+ is not essential for inducing C. difficile spore germination because amino acid and Ca2+ co-germinant signals are sensed by parallel signaling pathways. IMPORTANCE Clostridioides difficile spore germination is essential for this major nosocomial pathogen to initiate infection. C. difficile spores germinate in response to sensing bile acid germinant signals alongside co-germinant signals. There are two classes of co-germinant signals: Ca2+ and amino acids. Prior work suggested that Ca2+ is essential for C. difficile spore germination based on bulk population analyses of germinating CaDPA mutant spores. Since these assays rely on optical density to measure spore germination and the optical density of CaDPA mutant spores is reduced relative to WT spores, this bulk assay is limited in its capacity to analyze germination. To overcome this limitation, we developed an automated image analysis pipeline to monitor C. difficile spore germination using time-lapse microscopy. With this analysis pipeline, we demonstrate that, although Ca2+ is dispensable for inducing C. difficile spore germination, CaDPA can function in a feedforward loop to potentiate the germination of neighboring spores.

Genomic Analysis of Clostridioides difficile Recovered from Horses in Western Australia

Clostridioides difficile poses an ongoing threat as a cause of gastrointestinal disease in humans and animals. Traditionally considered a human healthcare-related disease, increases in community-associated C. difficile infection (CDI) and growing evidence of inter-species transmission suggest a wider perspective is required for CDI control. In horses, C. difficile is a major cause of diarrhoea and life-threatening colitis. This study aimed to better understand the epidemiology of CDI in Australian horses and provide insights into the relationships between horse, human and environmental strains. A total of 752 faecal samples from 387 Western Australian horses were collected. C. difficile was isolated from 104 (30.9%) horses without gastrointestinal signs and 19 (37.8%) with gastrointestinal signs. Of these, 68 (55.3%) harboured one or more toxigenic strains, including C. difficile PCR ribotypes (RTs) 012 (n = 14), 014/020 (n = 10) and 087 (n = 7), all prominent in human infection. Whole-genome analysis of 45 strains identified a phylogenetic cluster of 10 closely related C. difficile RT 012 strains of equine, human and environmental origin (0-62 SNP differences; average 23), indicating recent shared ancestry. Evidence of possible clonal inter-species transmission or common-source exposure was identified for a subgroup of three horse and one human isolates, highlighting the need for a One Health approach to C. difficile surveillance.

Environmental sporobiota: Occurrence, dissemination, and risks

Spore-forming bacteria known as sporobiota are widespread in diverse environments from terrestrial and aquatic habitats to industrial and healthcare systems. Studies on sporobiota have been mainly focused on food processing and clinical fields, while a large amount of sporobiota exist in natural environments. Due to their persistence and capabilities of transmitting virulence factors and antibiotic resistant genes, environmental sporobiota could pose significant health risks to humans. These risks could increase as global warming and environmental pollution has altered the life cycle of sporobiota. This review summarizes the current knowledge of environmental sporobiota, including their occurrence, characteristics, and functions. An interaction network among clinical-, food-related, and environment-related sporobiota is constructed. Recent and effective methods for detecting and disinfecting environmental sporobiota are also discussed. Key problems and future research needs for better understanding and reducing the risks of environmental sporobiota and sporobiome are proposed.

The in situ efficacy of whole room disinfection devices: a literature review with practical recommendations for implementation

BACKGROUND

Terminal cleaning and disinfection of hospital patient rooms must be performed after discharge of a patient with a multidrug resistant micro-organism to eliminate pathogens from the environment. Terminal disinfection is often performed manually, which is prone to human errors and therefore poses an increased infection risk for the next patients. Automated whole room disinfection (WRD) replaces or adds on to the manual process of disinfection and can contribute to the quality of terminal disinfection. While the in vitro efficacy of WRD devices has been extensively investigated and reviewed, little is known about the in situ efficacy in a real-life hospital setting. In this review, we summarize available literature on the in situ efficacy of WRD devices in a hospital setting and compare findings to the in vitro efficacy of WRD devices. Moreover, we offer practical recommendations for the implementation of WRD devices.

METHODS

The in situ efficacy was summarized for four commonly used types of WRD devices: aerosolized hydrogen peroxide, H₂O₂ vapour, ultraviolet C and pulsed xenon ultraviolet. The in situ efficacy was based on environmental and clinical outcome measures. A systematic literature search was performed in PubMed in September 2021 to identify available literature. For each disinfection system, we summarized the available devices, practical information, in vitro efficacy and in situ efficacy.

RESULTS

In total, 54 articles were included. Articles reporting environmental outcomes of WRD devices had large variation in methodology, reported outcome measures, preparation of the patient room prior to environmental sampling, the location of sampling within the room and the moment of sampling. For the clinical outcome measures, all included articles reported the infection rate. Overall, these studies consistently showed that automated disinfection using any of the four types of WRD is effective in reducing environmental and clinical outcomes.

CONCLUSION

Despite the large variation in the included studies, the four automated WRD systems are effective in reducing the amount of pathogens present in a hospital environment, which was also in line with conclusions from in vitro studies. Therefore, the assessment of what WRD device would be most suitable in a specific healthcare setting mostly depends on practical considerations.

Response Regulator CD1688 Is a Negative Modulator of Sporulation in Clostridioides difficile

Two-component signal transduction systems (TCSs), consisting of a sensor histidine kinase (HK) and a response regulator (RR), sense environmental stimuli and then modulate cellular responses, typically through changes in gene expression. Our previous work identified the DNA binding motif of CD1586, an RR implicated in Clostridioides difficile strain R20291 sporulation. To determine the role of this RR in the sporulation pathway in C. difficile, we generated a deletion strain of cd1688 in the historical 630 strain, the homolog of cd1586. The C. difficile Δcd1688 strain exhibited a hypersporulation phenotype, suggesting that CD1688 negatively regulates sporulation. Complementation of the C. difficile Δcd1688 strain restored sporulation. In contrast, a nonphosphorylatable copy of cd1688 did not restore sporulation to wild-type (WT) levels, indicating that CD1688 must be phosphorylated to properly modulate sporulation. Expression of the master regulator spo0A, the sporulation-specific sigma factors sigF, sigE, sigG, and sigK, and a signaling protein encoded by spoIIR was increased in the C. difficile Δcd1688 strain compared to WT. In line with the increased spoIIR expression, we detected an increase in mature SigE at an earlier time point, which arises from SpoIIR-mediated processing of pro-SigE. Taken together, our data suggest that CD1688 is a novel negative modulator of sporulation in C. difficile and contributes to mediating progression through the spore developmental pathway. These results add to our growing understanding of the complex regulatory events involved in C. difficile sporulation, insight that could be exploited for novel therapeutic development.

IMPORTANCEClostridioides difficile causes severe gastrointestinal illness and is a leading cause of nosocomial infections in the United States. This pathogen produces metabolically dormant spores that are the major vehicle of transmission between hosts. The sporulation pathway involves an intricate regulatory network that controls a succession of morphological changes necessary to produce spores. The environmental signals inducing the sporulation pathway are not well understood in C. difficile. This work identified a response regulator, CD1688, that, when deleted, led to a hypersporulation phenotype, indicating that it typically acts to repress sporulation. Improving our understanding of the regulatory mechanisms modulating sporulation in C. difficile could provide novel strategies to eliminate or reduce spore production, thus decreasing transmission and disease relapse.

Nosocomial Infections and Role of Nanotechnology

Nosocomial infections, termed hospital-acquired infections (HAIs), are acquired from a healthcare or hospital setting. HAI is mainly caused by bacteria, such as Acinetobacter baumannii, Klebsiella pneumoniae, Escherichia coli, Enterococci spp., Methicillin-resistant Staphylococcus aureus (MRSA), and many more. Due to growing antibacterial resistance, nanotechnology has paved the way for more potent and sensitive methods of detecting and treating bacterial infections. Nanoparticles have been used with molecular beacons for identifying bactericidal activities, targeting drug delivery, and anti-fouling coatings, etc. This review addresses the looming threat of nosocomial infections, with a focus on the Indian scenario, and major initiatives taken by medical bodies and hospitals in spreading awareness and training. Further, this review focuses on the potential role nanotechnology can play in combating the spread of these infections.

Clostridioides difficile infection and One Health: An Equine Perspective

Clostridioides (Clostridium) difficile presents a significant health risk to humans and animals. The complexity of the bacterial–host interaction affecting pathogenesis and disease development creates an ongoing challenge for epidemiological studies, control strategies and prevention planning. The recent emergence of human disease caused by strains of C. difficile found in animals adds to mounting evidence that C. difficile infection (CDI) may be a zoonosis. In equine populations, C. difficile is a known cause of diarrhoea and gastrointestinal inflammation, with considerable mortality and morbidity. This has a significant impact on both the well‐being of the animal and, in the case of performance and production animals, it may have an adverse economic impact on relevant industries. While C. difficile is regularly isolated from horses, many questions remain regarding the impact of asymptomatic carriage as well as optimization of diagnosis, testing and treatment. This review provides an overview of our understanding of equine CDI while also identifying knowledge gaps and the need for a holistic One Health approach to a complicated issue.

Clostridioides difficile SpoVAD and SpoVAE Interact and Are Required for Dipicolinic Acid Uptake into Spores

Clostridioides difficile spores, like the spores from most endospore-forming organisms, are a metabolically dormant stage of development with a complex structure that conveys considerable resistance to environmental conditions, e.g., wet heat. This resistance is due to the large amount of dipicolinic acid (DPA) that is taken up by the spore core, preventing rotational motion of the core proteins. DPA is synthesized by the mother cell, and its packaging into the spore core is mediated by the products of the spoVA operon, which has a variable number of genes, depending on the organism. C. difficile encodes 3 spoVA orthologues, spoVAC, spoVAD, and spoVAE. Prior work has shown that C. difficile SpoVAC is a mechanosensing protein responsible for DPA release from the spore core upon the initiation of germination. However, the roles of SpoVAD and SpoVAE remain unclear in C. difficile. In this study, we analyzed the roles of SpoVAD and SpoVAE and found that they are essential for DPA uptake into the spore, similar to SpoVAC. Using split luciferase protein interaction assays, we found that these proteins interact, and we propose a model where SpoVAC/SpoVAD/SpoVAE proteins interact at or near the inner spore membrane, and each member of the complex is essential for DPA uptake into the spore core. IMPORTANCE C. difficile spore heat resistance provides an avenue for it to survive the disinfection protocols in hospital and community settings. The spore heat resistance is mainly the consequence of the high DPA content within the spore core. By elucidating the mechanism by which DPA is taken up by the spore core, this study may provide insight into how to disrupt the spore heat resistance with the aim of making the current disinfection protocols more efficient at preventing the spread of C. difficile in the environment.

Opportunities for Nanomedicine in Clostridioides difficile Infection

Clostridioides difficile, a spore-forming bacterium, is a nosocomial infectious pathogen which can be found in animals as well. Although various antibiotics and disinfectants were developed, C. difficile infection (CDI) remains a serious health problem. C. difficile spores have complex structures and dormant characteristics that contribute to their resistance to harsh environments, successful transmission and recurrence. C. difficile spores can germinate quickly after being exposed to bile acid and co-germinant in a suitable environment. The vegetative cells produce endospores, and the mature spores are released from the hosts for dissemination of the pathogen. Therefore, concurrent elimination of C. difficile vegetative cells and inhibition of spore germination is essential for effective control of CDI. This review focused on the molecular pathogenesis of CDI and new trends in targeting both spores and vegetative cells of this pathogen, as well as the potential contribution of nanotechnologies for the effective management of CDI.

Mathematically modeling the effect of touch frequency on the environmental transmission of Clostridioides difficile in healthcare settings

Clostridioides difficile, formerly Clostridium difficile, is the leading cause of infectious diarrhea and one of the most common healthcare acquired infections in United States hospitals. C. difficile persists well in healthcare environments because it forms spores that can survive for long periods of time and can be transmitted to susceptible patients through contact with contaminated hands and fomites, objects or surfaces that can harbor infectious agents. Fomites can be classified as high-touch or low-touch based on the frequency they are contacted. The mathematical model in this study investigates the relative contribution of high-touch and low-touch fomites on new cases of C. difficile colonization among patients of a hospital ward. The dynamics of transmission are described by a system of ordinary differential equations representing four patient population classes and two pathogen environmental reservoirs. Parameters that have a significant effect on incidence, as determined by a global sensitivity analysis, are varied in stochastic simulations of the system to identify feasible strategies to prevent disease transmission. Results indicate that on average, under one-quarter of asymptomatically colonized patients are exposed to C. difficile via low-touch fomites. In comparison, over three-quarters of colonized patients are colonized through high-touch fomites, despite additional cleaning of high-touch fomites. Increased contacts with high-touch fomites increases the contribution of these fomites to the incidence of colonized individuals and decreasing the duration of a hospital visit reduces the amount of pathogen in the environment. Thus, enhanced efficacy of disinfection upon discharge and extra cleaning of high-touch fomites, reduced contact with high-touch fomites, and higher discharge rates, among other control measures, could lead to a decrease in the incidence of colonized individuals.

Clostridioides difficile Spore Formation and Germination: New Insights and Opportunities for Intervention

Spore formation and germination are essential for the bacterial pathogen Clostridioides difficile to transmit infection. Despite the importance of these developmental processes to the infection cycle of C. difficile, the molecular mechanisms underlying how this obligate anaerobe forms infectious spores and how these spores germinate to initiate infection were largely unknown until recently. Work in the last decade has revealed that C. difficile uses a distinct mechanism for sensing and transducing germinant signals relative to previously characterized spore formers. The C. difficile spore assembly pathway also exhibits notable differences relative to Bacillus spp., where spore formation has been more extensively studied. For both these processes, factors that are conserved only in C. difficile or the related Peptostreptococcaceae family are employed, and even highly conserved spore proteins can have differential functions or requirements in C. difficile compared to other spore formers. This review summarizes our current understanding of the mechanisms controlling C. difficile spore formation and germination and describes strategies for inhibiting these processes to prevent C. difficile infection and disease recurrence.

Chemical disinfection in healthcare settings: critical aspects for the development of global strategies

Chemical disinfection is an indispensable means of preventing infection. This holds true for healthcare settings, but also for all other settings where transmission of pathogens poses a potential health risk to humans and/or animals. Research on how to ensure effectiveness of disinfectants and the process of disinfection, as well as on when, how and where to implement disinfection precautions is an ongoing challenge requiring an interdisciplinary team effort. The valuable resources of active substances used for disinfection must be used wisely and their interaction with the target organisms and the environment should be evaluated and monitored closely, if we are to reliable reap the benefits of disinfection in future generations. In view of the global threat of communicable diseases and emerging and re-emerging pathogens and multidrug-resistant pathogens, the relevance of chemical disinfection is continually increasing. Although this consensus paper pinpoints crucial aspects for strategies of chemical disinfection in terms of the properties of disinfectant agents and disinfection practices in a particularly vulnerable group and setting, i.e., patients in healthcare settings, it takes a comprehensive, holistic approach to do justice to the complexity of the topic of disinfection.

Comparison and evaluation of a high volume air sampling system for the collection of Clostridioides difficile endospore aerosol in health care environments

BACKGROUND

Environmental contamination of patient rooms and adjacent areas with C. difficile spores is a recognized transmission risk. Previous studies have shown that spores are aerosolized during patient care. These spores can remain airborne for extended periods and may contaminate distant surfaces. High-volume air sampling equipment allows for the collection of a large volume of air and was evaluated in the collection of C. difficile aerosol.

METHOD

Air samplers evaluated in this research included the DFU-1000, XMX/2L-MIL, Biocapture-650, and a MB2. Aerosols of C. difficile were generated in a 5-m³ chamber and each air sampler sampled in the aerosol test chamber simultaneously with referee air samplers.

RESULTS

The DFU-1000 achieved the highest efficiency of the 4 air samplers (P = .0145) with a mean efficiency of 38.60%. The relative efficiencies of the Biocapture-650, XMX/2L-MIL, and MB2 were 28.16%, 10.51%, and 3.05%, respectively.

DISCUSSION/CONCLUSIONS

This study demonstrated high variation based on the sampling method employed. Based on the results of these studies, high-volume air samplers may be effectively applied to sample for airborne C. difficile in health care environments. The high sampling flow rate of the DFU-1000 would allow for the complete sampling of a patient room-sized volume in less than 1 hour.

Influence of delivery system on the efficacy of low concentrations of hydrogen peroxide in the disinfection of common healthcare-associated infection pathogens

INTRODUCTION

The ability of healthcare-associated infection pathogens to survive on environmental surfaces is well known. Disinfection is employed to reduce or remove these pathogens but disinfection failures still occur. One method with the potential to improve disinfection efficacy is whole-room disinfection with hydrogen peroxide (H₂O₂).

AIM

To determine the influence of delivery system on the efficacy of low-concentration H₂O₂ on common healthcare-associated infection pathogens.

METHODS

SanoStatic (electrostatic spray) was compared with SanoFog (fogging) in terms of performance for delivery of 5% H₂O₂ and trace silver ions for disinfection. The bacterial test challenges were vancomycin-resistant Enterobacterales (VRE), extended-spectrum β-lactamase (ESBL)-producing Klebsiella pneumoniae (ESBLK), carbapenemase-producing Enterobacterales (CPE), meticillin-resistant Staphylococcus aureus (MRSA), Clostridium difficile spores, Bacillus atropheus and Geobacillus stearothermophilus commercial spore strips.

FINDINGS

SanoFog and SanoStatic were effective when tested under the conditions of experimentation reported here. For VRE, ESBLK, CPE and MRSA, SanoFog and SanoStatic were comparable in performance. For C. difficile we concluded the following: SanoFog was most effective for disinfection of C. difficile spores when compared to SanoStatic.

CONCLUSION

Whereas SanoFog and SanoStatic were effective against bacterial cells, the current practice of using SanoFog and SanoStatic together would be effective for disinfection of C. difficile spores based on investigations under the conditions of experimentation reported here. The spore strips results were not comparable to the results either for the vegetation cells (VRE, ESBLK, CPE, and MRSA) or for C. difficile spores.

Clostridioides difficile Spores: Bile Acid Sensors and Trojan Horses of Transmission

The Gram-positive, spore-forming bacterium, Clostridioides difficile is the leading cause of healthcare-associated infections in the United States, although it also causes a significant number of community-acquired infections. C. difficile infections, which range in severity from mild diarrhea to toxic megacolon, cost more to treat than matched infections, with an annual treatment cost of approximately $6 billion for almost half-a-million infections. These high-treatment costs are due to the high rates of C. difficile disease recurrence (>20%) and necessity for special disinfection measures. These complications arise in part because C. difficile makes metabolically dormant spores, which are the major infectious particle of this obligate anaerobe. These seemingly inanimate life forms are inert to antibiotics, resistant to commonly used disinfectants, readily disseminated, and capable of surviving in the environment for a long period of time. However, upon sensing specific bile salts in the vertebrate gut, C. difficile spores transform back into the vegetative cells that are responsible for causing disease. This review discusses how spores are ideal vectors for disease transmission and how antibiotics modulate this process. We also describe the resistance properties of spores and how they create challenges eradicating spores, as well as promote their spread. Lastly, environmental reservoirs of C. difficile spores and strategies for destroying them particularly in health care environments will be discussed.

An overview of automated room disinfection systems: When to use them and how to choose them

Conventional disinfection methods are limited by reliance on the operator to ensure appropriate selection, formulation, distribution, and contact time of the agent. Automated room disinfection (ARD) systems remove or reduce reliance on operators and so they have the potential to improve the efficacy of terminal disinfection. The most commonly used systems are hydrogen peroxide vapor (H₂O₂ vapor), aerosolized hydrogen peroxide (aHP), and ultraviolet (UV) light. These systems have important differences in their active agent, delivery mechanism, efficacy, process time, and ease of use. The choice of ARD system should be influenced by the intended application, the evidence base for effectiveness, practicalities of implementation, and cost considerations.

Sporulation and Germination in Clostridial Pathogens

As obligate anaerobes, clostridial pathogens depend on their metabolically dormant, oxygen-tolerant spore form to transmit disease. However, the molecular mechanisms by which those spores germinate to initiate infection and then form new spores to transmit infection remain poorly understood. While sporulation and germination have been well characterized in Bacillus subtilis and Bacillus anthracis, striking differences in the regulation of these processes have been observed between the bacilli and the clostridia, with even some conserved proteins exhibiting differences in their requirements and functions. Here, we review our current understanding of how clostridial pathogens, specifically Clostridium perfringens, Clostridium botulinum, and Clostridioides difficile, induce sporulation in response to environmental cues, assemble resistant spores, and germinate metabolically dormant spores in response to environmental cues. We also discuss the direct relationship between toxin production and spore formation in these pathogens.

Adaptation of host transmission cycle during Clostridium difficile speciation

Bacterial speciation is a fundamental evolutionary process characterized by diverging genotypic and phenotypic properties. However, the selective forces that affect genetic adaptations and how they relate to the biological changes that underpin the formation of a new bacterial species remain poorly understood. Here, we show that the spore-forming, healthcare-associated enteropathogen Clostridium difficile is actively undergoing speciation. Through large-scale genomic analysis of 906 strains, we demonstrate that the ongoing speciation process is linked to positive selection on core genes in the newly forming species that are involved in sporulation and the metabolism of simple dietary sugars. Functional validation shows that the new C. difficile produces spores that are more resistant and have increased sporulation and host colonization capacity when glucose or fructose is available for metabolism. Thus, we report the formation of an emerging C. difficile species, selected for metabolizing simple dietary sugars and producing high levels of resistant spores, that is adapted for healthcare-mediated transmission.

Seasonality of Clostridium difficile in the natural environment

Clostridium difficile is considered the leading cause of antibiotic-associated disease worldwide. In the past decade, a large number of studies have focused on identifying the main sources of contamination in order to elucidate the complete life cycle of the infection. Hospitals, animals and retail foods have been considered as potential vectors. However, the prevalence of C. difficile in these types of samples was found to be rather low, suggesting that other contamination routes must exist. This study explores the presence of C. difficile in the natural environment and the seasonal dynamics of the bacterium. C. difficile was isolated from a total of 45 samples out of 112 collected (40.2%) on 56 sampling points. A total of 17 points were positive only during the winter sampling (30.4%), 10 were positive only during the summer sampling (17.9%) and 9 sampling points (16.1%) were positive in both summer sampling and winter sampling. Spore counts in soil samples ranged between 50 and 250 cfu/g for 24.4% of the positive samples, with the highest concentrations detected in samples collected in the forest during winter campaign (200-250 cfu/g). A total of 17 different PCR ribotypes were identified, and 15 of them had the genes coding for toxins A and B. Most of those ribotypes had not previously been found or had been isolated only sporadically (<1% of samples) from hospitals in Belgium. Regarding antimicrobial susceptibility, most of the resistant strains were found during the summer campaign. These findings bear out that C. difficile is present in the natural environment, where the bacterium undergoes seasonal variations.

The CspC pseudoprotease regulates germination of Clostridioides difficile spores in response to multiple environmental signals

The gastrointestinal pathogen, Clostridioides difficile, initiates infection when its metabolically dormant spore form germinates in the mammalian gut. While most spore-forming bacteria use transmembrane germinant receptors to sense nutrient germinants, C. difficile is thought to use the soluble pseudoprotease, CspC, to detect bile acid germinants. To gain insight into CspC's unique mechanism of action, we solved its crystal structure. Guided by this structure, we identified CspC mutations that confer either hypo- or hyper-sensitivity to bile acid germinant. Surprisingly, hyper-sensitive CspC variants exhibited bile acid-independent germination as well as increased sensitivity to amino acid and/or calcium co-germinants. Since mutations in specific residues altered CspC's responsiveness to these different signals, CspC plays a critical role in regulating C. difficile spore germination in response to multiple environmental signals. Taken together, these studies implicate CspC as being intimately involved in the detection of distinct classes of co-germinants in addition to bile acids and thus raises the possibility that CspC functions as a signaling node rather than a ligand-binding receptor.

Self-disinfecting surfaces and infection control

According to World Health Organization, every year in the European Union, 4 million patients acquire a healthcare associated infection. Even though some microorganisms represent no threat to healthy people, hospitals harbor different levels of immunocompetent individuals, namely patients receiving immunosuppressors, with previous infections, or those with extremes of age (young children and elderly), requiring the implementation of effective control measures. Public spaces have also been found an important source of infectious disease outbreaks due to poor or none infection control measures applied. In both places, surfaces play a major role on microorganisms' propagation, yet they are very often neglected, with very few guidelines about efficient cleaning measures and microbiological assessment available. To overcome surface contamination problems, new strategies are being designed to limit the microorganisms' ability to survive over surfaces and materials. Surface modification and/or functionalization to prevent contamination is a hot-topic of research and several different approaches have been developed lately. Surfaces with anti-adhesive properties, with incorporated antimicrobial substances or modified with biological active metals are some of the strategies recently proposed. This review intends to summarize the problems associated with contaminated surfaces and their importance on infection spreading, and to present some of the strategies developed to prevent this public health problem, namely some already being commercialized.

Vancomycin-Loaded Nanoparticles Enhance Sporicidal and Antibacterial Efficacy for Clostridium difficile Infection

Current antibiotic treatments fail to eliminate the Clostridium difficile (C. difficile) spores and induce dysbiosis and intestinal inflammation via off-target effect, which causes refractory C. difficile infection raise an unmet need for a spore-specific antimicrobial treatment. We developed a sporicidal and antimicrobial vancomycin-loaded spore-targeting iron oxide nanoparticle (van-IONP) that selectively binds to C. difficile spores. Cryo-electron microscopy showed that vancomycin-loaded nanoparticles can target and completely cover spore surfaces. They not only successfully delayed the germination of the spores but also inhibited ∼50% of vegetative cell outgrowth after 48 h of incubation. The van-IONPs also inhibited the interaction of spores with HT-29 intestinal mucosal cells in vitro. In a murine model of C. difficile infection, the van-IONP significantly protected the mice from infected by C. difficile infection, reducing intestinal inflammation, and facilitated superior mucosal viability compared with equal doses of free vancomycin. This dual-function targeted delivery therapy showed advantages over traditional therapeutics in treating C. difficile infection.

Enterotoxic Clostridia: Clostridioides difficile Infections

Clostridioides difficile is a Gram-positive, anaerobic, spore forming pathogen of both humans and animals and is the most common identifiable infectious agent of nosocomial antibiotic-associated diarrhea. Infection can occur following the ingestion and germination of spores, often concurrently with a disruption to the gastrointestinal microbiota, with the resulting disease presenting as a spectrum, ranging from mild and self-limiting diarrhea to severe diarrhea that may progress to life-threating syndromes that include toxic megacolon and pseudomembranous colitis. Disease is induced through the activity of the C. difficile toxins TcdA and TcdB, both of which disrupt the Rho family of GTPases in host cells, causing cell rounding and death and leading to fluid loss and diarrhea. These toxins, despite their functional and structural similarity, do not contribute to disease equally. C. difficile infection (CDI) is made more complex by a high level of strain diversity and the emergence of epidemic strains, including ribotype 027-strains which induce more severe disease in patients. With the changing epidemiology of CDI, our understanding of C. difficile disease, diagnosis, and pathogenesis continues to evolve. This article provides an overview of the current diagnostic tests available for CDI, strain typing, the major toxins C. difficile produces and their mode of action, the host immune response to each toxin and during infection, animal models of disease, and the current treatment and prevention strategies for CDI.

Toilet plume aerosol generation rate and environmental contamination following bowl water inoculation with Clostridium difficile spores

INTRODUCTION

Clostridium difficile is the leading cause of health care-associated gastric illness. Environmental contamination with C difficile spores is a risk factor for contact transmission, and toilet flushing causes such contamination. This work explores toilet contamination persistence and environmental contamination produced over a series of flushes after contamination.

METHODS

A flushometer toilet was seeded with C difficile spores in a sealed chamber. The toilet was flushed 24times, with postflush bowl water samples and settle plates periodically collected for culturing and counting. Air samples were collected after each of 12 flushes using rotating plate impactors.

RESULTS

Spores were present in bowl water even after 24 flushes. Large droplet spore deposition accumulated over the 24-flush period. Droplet nuclei spore bioaerosol was produced over at least 12 flushes.

CONCLUSIONS

Toilets contaminated with C difficile spores are a persistent source of environmental contamination over an extended number of flushes.

Probing Clostridium difficile Infection in Complex Human Gut Cellular Models

Interactions of anaerobic gut bacteria, such as Clostridium difficile, with the intestinal mucosa have been poorly studied due to challenges in culturing anaerobes with the oxygen-requiring gut epithelium. Although gut colonization by C. difficile is a key determinant of disease outcome, precise mechanisms of mucosal attachment and spread remain unclear. Here, using human gut epithelial monolayers co-cultured within dual environment chambers, we demonstrate that C. difficile adhesion to gut epithelial cells is accompanied by a gradual increase in bacterial numbers. Prolonged infection causes redistribution of actin and loss of epithelial integrity, accompanied by production of C. difficile spores, toxins, and bacterial filaments. This system was used to examine C. difficile interactions with the commensal Bacteroides dorei, and interestingly, C. difficile growth is significantly reduced in the presence of B. dorei. Subsequently, we have developed novel models containing a myofibroblast layer, in addition to the epithelium, grown on polycarbonate or three-dimensional (3D) electrospun scaffolds. In these more complex models, C. difficile adheres more efficiently to epithelial cells, as compared to the single epithelial monolayers, leading to a quicker destruction of the epithelium. Our study describes new controlled environment human gut models that enable host-anaerobe and pathogen-commensal interaction studies in vitro.

Review of Decontamination Techniques for the Inactivation of Bacillus anthracis and Other Spore-Forming Bacteria Associated with Building or Outdoor Materials

Since the intentional release of Bacillus anthracis spores through the U.S. Postal Service in the fall of 2001, research and development related to decontamination for this biological agent have increased substantially. This review synthesizes the advances made relative to B. anthracis spore decontamination science and technology since approximately 2002, referencing the open scientific literature and publicly available, well-documented scientific reports. In the process of conducting this review, scientific knowledge gaps have also been identified. This review focuses primarily on techniques that are commercially available and that could potentially be used in the large-scale decontamination of buildings and other structures, as well as outdoor environments. Since 2002, the body of scientific data related to decontamination and microbial sterilization has grown substantially, especially in terms of quantifying decontamination efficacy as a function of several factors. Specifically, progress has been made in understanding how decontaminant chemistry, the materials the microorganisms are associated with, environmental factors, and microbiological methods quantitatively impact spore inactivation. While advancement has been made in the past 15 years to further the state of the science in the inactivation of bacterial spores in a decontamination scenario, further research is warranted to close the scientific gaps that remain.

Fighting AMR in the Healthcare Environment: Microbiome-Based Sanitation Approaches and Monitoring Tools

Healthcare-associated infections (HAIs) affect up to 15% of all hospitalized patients, representing a global concern. Major causes include the persistent microbial contamination of hospital environment, and the growing antimicrobial-resistance (AMR) of HAI-associated microbes. The hospital environment represents in fact a reservoir of potential pathogens, continuously spread by healthcare personnel, visiting persons and hospitalized patients. The control of contamination has been so far addressed by the use of chemical-based sanitation procedures, which however have limitations, as testified by the persistence of contamination itself and by the growing AMR of hospital microbes. Here we review the results collected by a microbial-based sanitation system, inspired by the microbiome balance principles, in obtaining more effective control of microbial contamination and AMR. Whatever the sanitation system used, an important aspect of controlling AMR and HAIs relates to the ability to check any variation of a microbial population rapidly and effectively, thus effective monitoring procedures are also described.

CotL, a new morphogenetic spore coat protein of Clostridium difficile

The strict anaerobe Clostridium difficile is the most common cause of antibiotic-associated diarrhoea. The oxygen-resistant C. difficile spores play a central role in the infectious cycle, contributing to transmission, infection and recurrence. The spore surface layers, the coat and exosporium, enable the spores to resist physical and chemical stress. However, little is known about the mechanisms of their assembly. In this study, we characterized a new spore protein, CotL, which is required for the assembly of the spore coat. The cotL gene was expressed in the mother cell compartment under the dual control of the RNA polymerase sigma factors, σ^E and σ^K . CotL was localized in the spore coat, and the spores of the cotL mutant had a major morphologic defect at the level of the coat/exosporium layers. Therefore, the mutant spores contained a reduced amount of several coat/exosporium proteins and a defect in their localization in sporulating cells. Finally, cotL mutant spores were more sensitive to lysozyme and were impaired in germination, a phenotype likely to be associated with the structurally altered coat. Collectively, these results strongly suggest that CotL is a morphogenetic protein essential for the assembly of the spore coat in C. difficile.

Resistance of Bacteria to Biocides

Biocides and formulated biocides are used worldwide for an increasing number of applications despite tightening regulations in Europe and in the United States. One concern is that such intense usage of biocides could lead to increased bacterial resistance to a product and cross-resistance to unrelated antimicrobials including chemotherapeutic antibiotics. Evidence to justify such a concern comes mostly from the use of health care-relevant bacterial isolates, although the number of studies of the resistance characteristics of veterinary isolates to biocides have increased the past few years. One problem remains the definition of "resistance" and how to measure resistance to a biocide. This has yet to be addressed globally, although the measurement of resistance is becoming more pressing, with regulators both in Europe and in the United States demanding that manufacturers provide evidence that their biocidal products will not impact on bacterial resistance. Alongside in vitro evidence of potential antimicrobial cross-resistance following biocide exposure, our understanding of the mechanisms of bacterial resistance and, more recently, our understanding of the effect of biocides to induce a mechanism(s) of resistance in bacteria has improved. This article aims to provide an understanding of the development of antimicrobial resistance in bacteria following a biocide exposure. The sections provide evidence of the occurrence of bacterial resistance and its mechanisms of action and debate how to measure bacterial resistance to biocides. Examples pertinent to the veterinary field are used where appropriate.

Vulnerability of long-term care facility residents to Clostridium difficile infection due to microbiome disruptions

Aging presents a significant risk factor for Clostridium difficile infection (CDI). A disproportionate number of CDIs affect individuals in long-term care facilities compared with the general population, likely due to the vulnerable nature of the residents and shared environment. Review of the literature cites a number of underlying medical conditions such as the use of antibiotics, proton pump inhibitors, chemotherapy, renal disease and feeding tubes as risk factors. These conditions alter the intestinal environment through direct bacterial killing, changes to pH that influence bacterial stabilities or growth, or influence nutrient availability that direct population profiles. In this review, we examine some of the contributing risk factors for elderly associated CDI and the toll they take on the microbiome.

A microbiological study to investigate the carriage and transmission-potential of Clostridium difficile spores on single-use and reusable sharps containers

BACKGROUND

A 2015 study matching use of disposable and reusable sharps containers (DSCs, RSCs) with Clostridium difficile infection (CDI) incidence found a decreased incidence with DSCs. We conducted microbiologic samplings and examined the literature and disease-transmission principles to evaluate the scientific feasibility of such an association.

METHODS

(i) 197 RSCs were sampled for C. difficile at processing facilities; (ii) RSCs were challenged with high C. difficile densities to evaluate efficacy of automated decontamination; and (iii) 50 RSCs and 50 DSCs were sampled in CDI patient rooms in 7 hospitals. Results were coupled with epidemiologic studies, clinical requirements, and chain-of-infection principles, and tests of evidence of disease transmission were applied.

RESULTS

C. difficile spores were found on 9 of 197 (4.6%) RSCs prior to processing. Processing completely removed C. difficile. In CDI patient rooms, 4 of 50 RSCs (8.0%) and 8 of 50 DSCs (16.0%) had sub-infective counts of C. difficile (P = .27). DSCs were in permanent wall cabinets; RSCs were removed and decontaminated frequently.

CONCLUSION

With C. difficile bioburden being sub-infective on both DSCs and RSCs, sharps containers being no-touch, and glove removal required after sharps disposal, we found 2 links in the chain of infection to be broken and 5 of 7 tests of evidence to be unmet. We conclude that sharps containers pose no risk of C. difficile transmission.

Increased environmental sample area and recovery ofClostridium difficilespores from hospital surfaces by quantitative PCR and enrichment culture

Objective

Clostridium difficilespores play an important role in transmission and can survive in the environment for several months. Optimal methods for measuring environmentalC. difficileare unknown. We sought to determine whether increased sample surface area improved detection ofC. difficilefrom environmental samples.

Setting

Samples were collected from 12 patient rooms in a tertiary-care hospital in Toronto, Canada.

Methods

Samples represented small surface-area and large surface-area floor and bedrail pairs from single-bed rooms of patients with low (without prior antibiotics), medium (with prior antibiotics), and high (C. difficileinfected) shedding risk. Presence ofC. difficilein samples was measured using quantitative polymerase chain reaction (qPCR) with targets on the 16S rRNA and toxin B genes and using enrichment culture.

Results

Of the 48 samples, 64·6% were positive by 16S qPCR (geometric mean, 13·8 spores); 39·6% were positive by toxin B qPCR (geometric mean, 1·9 spores); and 43·8% were positive by enrichment culture. By 16S qPCR, each 10-fold increase in sample surface area yielded 6·6 times (95% CI, 3·2–13) more spores. Floor surfaces yielded 27 times (95% CI, 4·9–181) more spores than bedrails, and rooms ofC. difficile–positive patients yielded 11 times (95% CI, 0·55–164) more spores than those of patients without prior antibiotics. Toxin B qPCR and enrichment culture returned analogous findings.

Conclusions

Clostridium difficilespores were identified in most floor and bedrail samples, and increased surface area improved detection. Future research aiming to understand the role of environmentalC. difficilein transmission should prefer samples with large surface areas.

Revisiting the Role of Csp Family Proteins in Regulating Clostridium difficile Spore Germination

Clostridium difficile causes considerable health care-associated gastrointestinal disease that is transmitted by its metabolically dormant spore form. Upon entering the gut, C. difficile spores germinate and outgrow to produce vegetative cells that release disease-causing toxins. C. difficile spore germination depends on the Csp family of (pseudo)proteases and the cortex hydrolase SleC. The CspC pseudoprotease functions as a bile salt germinant receptor that activates the protease CspB, which in turn proteolytically activates the SleC zymogen. Active SleC degrades the protective cortex layer, allowing spores to outgrow and resume metabolism. We previously showed that the CspA pseudoprotease domain, which is initially produced as a fusion to CspB, controls the incorporation of the CspC germinant receptor in mature spores. However, study of the individual Csp proteins has been complicated by the polar effects of TargeTron-based gene disruption on the cspBA-cspC operon. To overcome these limitations, we have used pyrE-based allelic exchange to create individual deletions of the regions encoding CspB, CspA, CspBA, and CspC in strain 630Δerm Our results indicate that stable CspA levels in sporulating cells depend on CspB and confirm that CspA maximizes CspC incorporation into spores. Interestingly, we observed that csp and sleC mutants spontaneously germinate more frequently in 630Δerm than equivalent mutants in the JIR8094 and UK1 strain backgrounds. Analyses of this phenomenon suggest that only a subpopulation of C. difficile 630Δerm spores can spontaneously germinate, in contrast with Bacillus subtilis spores. We also show that C. difficile clinical isolates that encode truncated CspBA variants have sequencing errors that actually produce full-length CspBA.IMPORTANCEClostridium difficile is a leading cause of health care-associated infections. Initiation of C. difficile infection depends on spore germination, a process controlled by Csp family (pseudo)proteases. The CspC pseudoprotease is a germinant receptor that senses bile salts and activates the CspB protease, which activates a hydrolase required for germination. Previous work implicated the CspA pseudoprotease in controlling CspC incorporation into spores but relied on plasmid-based overexpression. Here we have used allelic exchange to study the functions of CspB and CspA. We determined that CspA production and/or stability depends on CspB and confirmed that CspA maximizes CspC incorporation into spores. Our data also suggest that a subpopulation of C. difficile spores spontaneously germinates in the absence of bile salt germinants and/or Csp proteins.

Inducible Expression of spo0A as a Universal Tool for Studying Sporulation in Clostridium difficile

Clostridium difficile remains a leading nosocomial pathogen, putting considerable strain on the healthcare system. The ability to form endospores, highly resistant to environmental insults, is key to its persistence and transmission. However, important differences exist between the sporulation pathways of C. difficile and the model Gram-positive organism Bacillus subtilis. Amongst the challenges in studying sporulation in C. difficile is the relatively poor levels of sporulation and high heterogeneity in the sporulation process. To overcome these limitations we placed P_tet regulatory elements upstream of the master regulator of sporulation, spo0A, generating a new strain that can be artificially induced to sporulate by addition of anhydrotetracycline (ATc). We demonstrate that this strain is asporogenous in the absence of ATc, and that ATc can be used to drive faster and more efficient sporulation. Induction of Spo0A is titratable and this can be used in the study of the spo0A regulon both in vitro and in vivo, as demonstrated using a mouse model of C. difficile infection (CDI). Insights into differences between the sporulation pathways in B. subtilis and C. difficile gained by study of the inducible strain are discussed, further highlighting the universal interest of this tool. The P_tet-spo0A strain provides a useful background in which to generate mutations in genes involved in sporulation, therefore providing an exciting new tool to unravel key aspects of sporulation in C. difficile.

Gleaning Insights from Fecal Microbiota Transplantation and Probiotic Studies for the Rational Design of Combination Microbial Therapies

Beneficial microorganisms hold promise for the treatment of numerous gastrointestinal diseases. The transfer of whole microbiota via fecal transplantation has already been shown to ameliorate the severity of diseases such as Clostridium difficile infection, inflammatory bowel disease, and others. However, the exact mechanisms of fecal microbiota transplant efficacy and the particular strains conferring this benefit are still unclear. Rationally designed combinations of microbial preparations may enable more efficient and effective treatment approaches tailored to particular diseases. Here we use an infectious disease, C. difficile infection, and an inflammatory disorder, the inflammatory bowel disease ulcerative colitis, as examples to facilitate the discussion of how microbial therapy might be rationally designed for specific gastrointestinal diseases. Fecal microbiota transplantation has already shown some efficacy in the treatment of both these disorders; detailed comparisons of studies evaluating commensal and probiotic organisms in the context of these disparate gastrointestinal diseases may shed light on potential protective mechanisms and elucidate how future microbial therapies can be tailored to particular diseases.

Octahedron Iron Oxide Nanocrystals Prohibited Clostridium difficile Spore Germination and Attenuated Local and Systemic Inflammation

Clinical management of Clostridium difficile infection is still far from satisfactory as bacterial spores are resistant to many chemical agents and physical treatments. Certain types of nanoparticles have been demonstrated to exhibit anti-microbial efficacy even in multi-drug resistance bacteria. However, most of these studies failed to show biocompatibility to the mammalian host cells and no study has revealed in vivo efficacy in C. difficile infection animal models. The spores treated with 500 µg/mL Fe_3-δO₄ nanoparticles for 20 minutes, 64% of the spores were inhibited from transforming into vegetative cells, which was close to the results of the sodium hypochlorite-treated positive control. By cryo-electron micro-tomography, we demonstrated that Fe_3-δO₄ nanoparticles bind on spore surfaces and reduce the dipicolinic acid (DPA) released by the spores. In a C. difficile infection animal model, the inflammatory level triple decreased in mice with colonic C. difficile spores treated with Fe_3-δO₄ nanoparticles. Histopathological analysis showed a decreased intense neutrophil accumulation in the colon tissue of the Fe_3-δO₄ nanoparticle-treated mice. Fe_3-δO₄ nanoparticles, which had no influence on gut microbiota and apparent side effects in vivo, were efficacious inhibitors of C. difficile spore germination by attacking its surface and might become clinically feasible for prophylaxis and therapy.

High-touch surfaces: microbial neighbours at hand

Despite considerable efforts, healthcare-associated infections (HAIs) continue to be globally responsible for serious morbidity, increased costs and prolonged length of stay. Among potentially preventable sources of microbial pathogens causing HAIs, patient care items and environmental surfaces frequently touched play an important role in the chain of transmission. Microorganisms contaminating such high-touch surfaces include Gram-positive and Gram-negative bacteria, viruses, yeasts and parasites, with improved cleaning and disinfection effectively decreasing the rate of HAIs. Manual and automated surface cleaning strategies used in the control of infectious outbreaks are discussed and current trends concerning the prevention of contamination by the use of antimicrobial surfaces are taken into consideration in this manuscript.

Microbiota-Based Therapies for Clostridium difficile and Antibiotic-Resistant Enteric Infections

Bacterial pathogens are increasingly antibiotic resistant, and development of clinically effective antibiotics is lagging. Curing infections increasingly requires antimicrobials that are broader spectrum, more toxic, and more expensive, and mortality attributable to antibiotic-resistant pathogens is rising. The commensal microbiota, comprising microbes that colonize the mammalian gastrointestinal tract, can provide high levels of resistance to infection, and the contributions of specific bacterial species to resistance are being discovered and characterized. Microbiota-mediated mechanisms of colonization resistance and pathogen clearance include bactericidal activity, nutrient depletion, immune activation, and manipulation of the gut's chemical environment. Current research is focusing on development of microbiota-based therapies to reduce intestinal colonization with antibiotic-resistant pathogens, with the goal of reducing pathogen transmission and systemic dissemination.

Clostridium difficile

Clostridium difficile infections (CDIs) have emerged as one of the principal threats to the health of hospitalized and immunocompromised patients. The importance of C difficile colonization is increasingly recognized not only as a source for false-positive clinical testing but also as a source of new infections within hospitals and other health care environments. In the last five years, several new treatment strategies that capitalize on the increasing understanding of the altered microbiome and host defenses in patients with CDI have completed clinical trials, including fecal microbiota transplantation. This article highlights the changing epidemiology, laboratory diagnostics, pathogenesis, and treatment of CDI.

Determination of the in vitro Sporulation Frequency of Clostridium difficile

The anaerobic, gastrointestinal pathogen, Clostridium difficile, persists within the environment and spreads from host-to-host via its infectious form, the spore. To effectively study spore formation, the physical differentiation of vegetative cells from spores is required to determine the proportion of spores within a population of C. difficile. This protocol describes a method to accurately enumerate both viable vegetative cells and spores separately and subsequently calculate a sporulation frequency of a mixed C. difficile population from various in vitro growth conditions (Edwards et al., 2016b).

Chemical and Stress Resistances of Clostridium difficile Spores and Vegetative Cells

Clostridium difficile is a Gram-positive, sporogenic and anaerobic bacterium that causes a potentially fatal colitis. C. difficile enters the body as dormant spores that germinate in the colon to form vegetative cells that secrete toxins and cause the symptoms of infection. During transit through the intestine, some vegetative cells transform into spores, which are more resistant to killing by environmental insults than the vegetative cells. Understanding the inherent resistance properties of the vegetative and spore forms of C. difficile is imperative for the development of methods to target and destroy the bacterium. The objective of this study was to define the chemical and environmental resistance properties of C. difficile vegetative cells and spores. We examined vegetative cell and spore tolerances of three C. difficile strains, including 630Δerm, a 012 ribotype and a derivative of a past epidemic strain; R20291, a 027 ribotype and current epidemic strain; and 5325, a clinical isolate that is a 078 ribotype. All isolates were tested for tolerance to ethanol, oxygen, hydrogen peroxide, butanol, chloroform, heat and sodium hypochlorite (household bleach). Our results indicate that 630Δerm vegetative cells (630 spo0A) are more resistant to oxidative stress than those of R20291 (R20291 spo0A) and 5325 (5325 spo0A). In addition, 5325 spo0A vegetative cells exhibited greater resistance to organic solvents. In contrast, 630Δerm spores were more sensitive than R20291 or 5325 spores to butanol. Spores from all three strains exhibited high levels of resistance to ethanol, hydrogen peroxide, chloroform and heat, although R20291 spores were more resistant to temperatures in the range of 60-75°C. Finally, household bleach served as the only chemical reagent tested that consistently reduced C. difficile vegetative cells and spores of all tested strains. These findings establish conditions that result in vegetative cell and spore elimination and illustrate the resistance of C. difficile to common decontamination methods. These results further demonstrate that the vegetative cells and spores of various C. difficile strains have different resistance properties that may impact decontamination of surfaces and hands.

A simple decontamination approach using hydrogen peroxide vapour for Bacillus anthracis spore inactivation

AIMS

To evaluate the use of relatively low levels of hydrogen peroxide vapour (HPV) for the inactivation of Bacillus anthracis spores within an indoor environment.

METHODS AND RESULTS

Laboratory-scale decontamination tests were conducted using bacterial spores of both B. anthracis Ames and Bacillus atrophaeus inoculated onto several types of materials. Pilot-scale tests were also conducted using a larger chamber furnished as an indoor office. Commercial off-the-shelf (COTS) humidifiers filled with aqueous solutions of 3 or 8% hydrogen peroxide (H₂ O₂ ) were used to generate the HPV inside the mock office. The spores were exposed to HPV for periods ranging from 8 h up to 1 week.

CONCLUSIONS

Four- to seven-day exposures to low levels of HPV (average air concentrations of approx. 5-10 parts per million) were effective in inactivating B. anthracis spores on multiple materials. The HPV can be generated with COTS humidifiers and household H₂ O₂ solutions. With the exception of one test/material, B. atrophaeus spores were equally or more resistant to HPV inactivation compared to those from B. anthracis Ames.

SIGNIFICANCE AND IMPACT OF THE STUDY

This simple and effective decontamination method is another option that could be widely applied in the event of a B. anthracis spore release.

Surface Disinfectants for Burn Units Evaluated by a New Double Method, Using Microorganisms Recently Isolated From Patients, on a Surface Germ-Carrier Model

Assessment methods of surface disinfection based on international standards (Environmental Protection Agency, European Norms, etc) do not correspond to hospital reality. New evaluation methods of surfaces disinfection are proposed to choose the most suitable disinfectant to act against clinically relevant microorganisms detected on the surfaces of burn units. 1) "Immediate effect": 6 products were compared using a glass germ-carrier and 20 recently isolated microorganisms from different patients in the intensive care units. Disinfectants were applied with microfiber cloths. Log10 reductions were calculated for colony forming units produced after 15 minutes of disinfectant application. 2) "Residual effect": the glass germ-carriers were previously impregnated with one of the studied disinfectants. After a 30-minute wait period, they were then contaminated with 1 microorganism (from the 20 above-mentioned). After 15 minutes, the disinfectant was inhibited and the log10 reduction of colony forming units was assessed. The immediate effect (disinfection and microorganism dragging and transferring from the surface to the cloth) produced complete elimination of the inoculums for all products used except one (a diluted quaternary ammonium). The average residual effect found on the 20 microorganisms was moderate: 2 to 3 log10 colony forming unit reduction with chlorine dioxide or 0.5% chlorhexidine (and lower with the other products), obtaining surfaces refractory to recontamination, at least, during 30 minutes. Two tests should be performed before advising surface disinfectant: 1) direct effect and 2) residual efficacy. These characteristics should be considered when a new surface disinfectant is chosen. Chlorine dioxide has a similar or better direct effect than sodium hypochlorite and a similar residual effect than chlorhexidine.