Optimization of protease secretion in Bacillus subtilis and Bacillus licheniformis by screening of homologous and heterologous signal peptides

Synergistic regulation of chassis cell growth and screening of promoters, signal peptides and fusion protein linkers for enhanced recombinant protein expression in Bacillus subtilis

Growth-advantageous microbial chassis cells are beneficial for shortening fermentation period and boosting biomolecule productivity. This study focused on enhancing recombinant proteins synthesis efficiency in Bacillus subtilis by CRISPRi-mediated metabolism regulation for improved cell growth and screening expression elements. Specifically, by repressing odhA gene expression to reallocate cellular resource and overexpressing atpC, atpD and atpG genes to reprogram energy metabolism, the growth-advantageous chassis cell with high specific growth rate of 0.63 h-1 and biomass yield of 0.41 g DCW/g glucose in minimum medium was developed, representing 61.54 % and 46.43 % increasements compared to B. subtilis 168. Subsequently, using screened optimal P566 promoter and (EAAAK)3 protein linker, secretory bovine alpha-lactalbumin (α-LA) titer reached 1.02 mg/L. Finally, to test protein synthesis capability of cells, intracellular GFP, secretory α-LA and α-amylase were expressed with P566 promoter, representing 43.76 %, 75.49 % and 82.98 % increasements. The growth-advantageous B. subtilis chassis cells exhibit their potential to boost bioproduction productivity.

Nitroreductase DnrA, Utilizing Strategies Secreted in Bacillus sp. Za and SCK6, Enhances the Detoxification of Acifluorfen

The residues of acifluorfen present a serious threat to the agricultural environment and sensitive crops. DnrA, a nitroreductase, is an intracellular enzyme that restricts the application of wild-type Bacillus sp. Za in environmental remediation. In this study, two strategies were employed to successfully secrete DnrA in strains SCK6 and Za, and the secretion expression conditions were optimized to achieve rapid degradation of acifluorfen. Under the optimal conditions, the relative activities of the DnrA supernatant from strains SCK6-D and Za-W were 3.06-fold and 3.53-fold higher than that of strain Za, respectively. While all three strains exhibited similar tolerance to different concentrations of acifluorfen, strains SCK6-D and Za-W demonstrated significantly faster degradation efficiency compared to strain Za. Furthermore, the DnrA supernatant from strains SCK6-D and Za-W could effectively reduce the toxicity of acifluorfen on maize and cucumber seedlings. This study provides an effective technical approach for the rapid degradation of acifluorfen.

Advances in recombinant protease production: current state and perspectives

Proteases, enzymes that catalyze the hydrolysis of peptide bonds in proteins, are important in the food industry, biotechnology, and medical fields. With increasing demand for proteases, there is a growing emphasis on enhancing their expression and production through microbial systems. However, proteases' native hosts often fall short in high-level expression and compatibility with downstream applications. As a result, the recombinant production of proteases has become a significant focus, offering a solution to these challenges. This review presents an overview of the current state of protease production in prokaryotic and eukaryotic expression systems, highlighting key findings and trends. In prokaryotic systems, the Bacillus spp. is the predominant host for proteinase expression. Yeasts are commonly used in eukaryotic systems. Recent advancements in protease engineering over the past five years, including rational design and directed evolution, are also highlighted. By exploring the progress in both expression systems and engineering techniques, this review provides a detailed understanding of the current landscape of recombinant protease research and its prospects for future advancements.

Development of novel natto using legumes produced in Europe

Natto is a traditional Japanese fermented product consisting of cooked soybeans fermented with Bacillus subtilis var. natto. We assessed three different B. subtilis strains and investigated their impact on product quality aspects, such as microbial quality, textural quality (poly-γ-glutamate strand formation), free amino acids (FAA), and volatile organic compounds (VOCs), but also the vitamin K1, K2 and B1 content, and presence of nattokinase. Using Bayesian contrast analysis, we conclude that the quality attributes were influenced by both the substrate and strain used, without significant differences in bacterial growth between strain or substrate. Overall, all the tested European legumes, except for brown beans, are adequate substrates to produce natto, with comparable or higher qualities compared to the traditional soy. Out of all the tested legumes, red lentils were the most optimal fermentation substrate. They were fermented most consistently, with high concentrations of vitamin K2, VOCs, FAA.

Genetic identification and expression optimization of a novel protease HapR from Bacillus velezensis

Due to the broad application and substantial market demand for proteases, it was vital to explore the novel and efficient protease resources. The aim of this study was to identify the novel protease for tobacco protein degradation and optimize the expression levels. Firstly, the tobacco protein was used as the sole nitrogen resource for isolation of protease-producing strains, and a strain with high protease production ability was obtained, identified as Bacillus velezensis WH-7. Then, the whole genome sequencing was conducted on the strain B. velezensis WH-7, and 7 proteases genes were mined by gene annotation analysis. By further heterologous expression of the 7 protease genes, the key protease HapR was identified with the highest protease activity (144.19 U/mL). Moreover, the catalysis mechanism of HapR was explained by amino acid sequence analysis. The expression levels of protease HapR were further improved through optimization of promoter, signal peptide and host strain, and the maximum protease activity reaced 384.27 U/mL in WX-02/pHY-P43-SPyfkD-hapR, increased by 167% than that of initial recombinant strain HZ/pHY-P43-SPhapR-hapR. This study identified a novel protease HapR and the expression level was significantly improved, which provided an important enzyme resource for the development of enzyme preparations in tobacco protein degradation.

Approaches for high-throughput quantification of periplasmic recombinant proteins

The Gram-negative periplasm is a convenient location for the accumulation of many recombinant proteins including biopharmaceutical products. It is the site of disulphide bond formation, required by some proteins (such as antibody fragments) for correct folding and function. It also permits simpler protein release and downstream processing than cytoplasmic accumulation. As such, targeting of recombinant proteins to the E. coli periplasm is a key strategy in biologic manufacture. However, expression and translocation of each recombinant protein requires optimisation including selection of the best signal peptide and growth and production conditions. Traditional methods require separation and analysis of protein compositions of periplasmic and cytoplasmic fractions, a time- and labour-intensive method that is difficult to parallelise. Therefore, approaches for high throughput quantification of periplasmic protein accumulation offer advantages in rapid process development.

Induction of the CtsR regulon improves Xylanase production in Bacillus subtilis

BACKGROUND

The bacterium Bacillus subtilis is extensively used for the commercial production of enzymes due to its efficient protein secretion capacity. However, the efficiency of secretion varies greatly between enzymes, and despite many years of research, optimization of enzyme production is still largely a matter of trial-and-error. Genome-wide transcriptome analysis seems a useful tool to identify relevant secretion bottlenecks, yet to this day, only a limited number of transcriptome studies have been published that focus on enzyme secretion in B. subtilis. Here, we examined the effect of high-level expression of the commercially important enzyme endo-1,4-β-xylanase XynA on the B. subtilis transcriptome using RNA-seq.

RESULTS

Using the novel gene-set analysis tool GINtool, we found a reduced activity of the CtsR regulon when XynA was overproduced. This regulon comprises several protein chaperone genes, including clpC, clpE and clpX, and is controlled by transcriptional repression. CtsR levels are directly controlled by regulated proteolysis, involving ClpC and its cognate protease ClpP. When we abolished this negative feedback, by inactivating the repressor CtsR, the XynA production increased by 25%.

CONCLUSIONS

Overproduction of enzymes can reduce the pool of Clp protein chaperones in B. subtilis, presumably due to negative feedback regulation. Breaking this feedback can improve enzyme production yields. Considering the conserved nature of Clp chaperones and their regulation, this method might benefit high-yield enzyme production in other organisms.

Study on active capacity and detergent application potential of low-temperature alkaline serine protease produced by new strain Exiguobacterium indicum 1.2.3

Microorganisms have long captivated researchers for their potential to produce enzymes with diverse industrial applications. Efficient production of proteases from new strains is crucial as these enzymes play a vital role in breaking down protein bonds, enabling their use in industrial applications. Therefore, a novel Exiguobacterium indicum 1.2.3 was isolated (Istanbul, Turkiye) and characterized in this study. This strain produced alkaline serine protease, which works in lower temperatures (20-40 °C) with casein as a specific substrate. The protease was utterly stable for 3 h at 30 °C. The enzyme was also highly stable in the pH range of 8-11. The optimum activity was obtained at pH 10. The crude enzyme activity was enhanced by various metal ions and retained 147%, 125%, 124%, and 117% of its activity within 1 mM Ca2+, Mn2+, Cu2+, and Mg2+, respectively. The crude enzyme was inactive with phenylmethylsulfonyl fluoride, indicating a serine residue on the active side. The enzyme exhibited a significant proteolytic effect in the presence of surfactants and oxidizing agents. The addition of Tween 80, Triton X-100, and sodium perborate improved enzymatic activity up to 135%, 109%, and 105%, respectively. According to the washing results, the crude enzyme effectively removed the blood on different types of standard pre-stained textiles at 30 °C. In conclusion, Exiguobacterium indicum 1.2.3 is a promising candidate for protease production, with its diverse applications spanning various industrial sectors, particularly detergents.

Metabolic engineering of Thermoanaerobacterium aotearoense strain SCUT27 for biofuels production from sucrose and molasses

BACKGROUND

Sucrose-rich sugarcane trash surpasses 28 million tons globally per year. Effective biorefinery systems could convert these biomasses to bioproducts, such as bioethanol from sugarcane sucrose in Brazil. Thermophilic microbes for biofuels have attracted great attention due to their higher fermentation temperature and wide substrate spectrum. However, few thermophiles using sucrose or molasses for biofuels production was reported. Thermoanaerobacterium aotearoense SCUT27 has been considered as an efficient ethanol producer, but it cannot directly utilize sucrose. In this study, various sucrose metabolic pathways were introduced and analyzed in Thermoanaerobaterium.

RESULTS

The sucrose-6-phosphate hydrolase (scrB), which was from a screened strain Thermoanaerobacterium thermosaccharolyticum G3-1 was overexpressed in T. aotearoense SCUT27 and endowed this strain with the ability to utilize sucrose. In addition, overexpression of the sucrose-specific PTS system (scrA) from Clostridium acetobutylicum accelerated the sucrose transport. To strengthen the alcohols production and substrates metabolism, the redox-sensing transcriptional repressor (rex) in T. aotearoense was further knocked out. Moreover, with the gene arginine repressor (argR) deleted, the ethanologenic mutant P8S10 showed great inhibitors-tolerance and finally accumulated ~ 34 g/L ethanol (a yield of 0.39 g/g sugars) from pretreated cane molasses in 5 L tank by fed-batch fermentation. When introducing butanol synthetic pathway, 3.22 g/L butanol was produced by P8SB4 with a yield of 0.44 g alcohols/g sugars at 50℃. This study demonstrated the potential application of T. aotearoense SCUT27 for ethanol and butanol production from low cost cane molasses.

CONCLUSIONS

Our work provided strategies for sucrose utilization in thermophiles and improved biofuels production as well as stress tolerances of T. aotearoense SCUT27, demonstrating the potential application of the strain for cost-effective biofuels production from sucrose-based feedstocks.

Analysis of protein secretion in Bacillus subtilis by combining a secretion stress biosensor strain with an in vivo split GFP assay

BACKGROUND

Bacillus subtilis is one of the workhorses in industrial biotechnology and well known for its secretion potential. Efficient secretion of recombinant proteins still requires extensive optimization campaigns and screening with activity-based methods. However, not every protein can be detected by activity-based screening. We therefore developed a combined online monitoring system, consisting of an in vivo split GFP assay for activity-independent target detection and an mCherry-based secretion stress biosensor. The split GFP assay is based on the fusion of a target protein to the eleventh β-sheet of sfGFP, which can complement a truncated sfGFP that lacks this β-sheet named GFP1-10. The secretion stress biosensor makes use of the CssRS two component quality control system, which upregulates expression of mCherry in the htrA locus thereby allowing a fluorescence readout of secretion stress.

RESULTS

The biosensor strain B. subtilis PAL5 was successfully constructed by exchanging the protease encoding gene htrA with mCherry via CRISPR/Cas9. The Fusarium solani pisi cutinase Cut fused to the GFP11 tag (Cut11) was used as a model enzyme to determine the stress response upon secretion mediated by signal peptides SPPel, SPEpr and SPBsn obtained from naturally secreted proteins of B. subtilis. An in vivo split GFP assay was developed, where purified GFP1-10 is added to the culture broth. By combining both methods, an activity-independent high-throughput method was created, that allowed optimization of Cut11 secretion. Using the split GFP-based detection assay, we demonstrated a good correlation between the amount of secreted cutinase and the enzymatic activity. Additionally, we screened a signal peptide library and identified new signal peptide variants that led to improved secretion while maintaining low stress levels.

CONCLUSION

Our results demonstrate that the combination of a split GFP-based detection assay for secreted proteins with a secretion stress biosensor strain enables both, online detection of extracellular target proteins and identification of bottlenecks during protein secretion in B. subtilis. In general, the system described here will also enable to monitor the secretion stress response provoked by using inducible promoters governing the expression of different enzymes.

Protein expression systems combining a flavonoid-inducible promoter and T7 RNA polymerase in Bacillus subtilis

Recombinant protein production must be tightly controlled when overproduction adversely affects the host bacteria. We developed a flavonoid-inducible T7 expression system in Bacillus subtilis using the qdoI promoter to control the T7 RNA polymerase gene (T7 pol). Using the egfp reporter gene controlled by the T7 promoter in a multicopy plasmid, we confirmed that this expression system is tightly regulated by flavonoids, such as quercetin and fisetin. Altering the qdoI promoter for T7 pol control to its hybrid derivative increased the expression level by 6.6-fold at maximum values upon induction. However, faint expression leakage was observed under a noninducing condition. Therefore, the two expression systems with the original qdoI promoter and the hybrid construct can be used selectively, depending on the high control accuracy or production yield required.

Efficient production of α-monoglucosyl hesperidin by cyclodextrin glucanotransferase from Bacillus subtilis

α-Monoglucosyl hesperidin is a promising food additive with various activities. However, there are a few reports about the production of α-monoglucosyl hesperidin. Here, to develop a practical and safe process for α-monoglucosyl hesperidin synthesis, we used nonpathogenic Bacillus subtilis as a host to express cyclodextrin glucanotransferase (CGTase) from Bacillus sp. A2-5a. The promoters and signal peptides were screened to optimize the transcription and secretion of CGTase in B. subtilis. The results of optimization showed that the best signal peptide and promoter were YdjM and P_aprE, respectively. Finally, the enzyme activity increased to 46.5 U mL^-1, 8.7 times that of the enzyme expressed from the strain containing pP_HpaII-LipA, and the highest yield of α-monoglucosyl hesperidin was 2.70 g L^-1 by enzymatic synthesis using the supernatant of the recombinant B. subtilis WB800 harboring the plasmid pP_aprE-YdjM. This is the highest α-monoglucosyl hesperidin production level using recombinant CGTase to date. This work provides a generally applicable method for the scaled-up production of α-monoglucosyl hesperidin. KEY POINTS: • A three-step procedure was created for high throughput signal peptide screening. • YdjM and P_aprE were screened from 173 signal peptides and 13 promoters. • α-Monoglucosyl hesperidin was synthesized by CGTase with a yield of 2.70 g L^-1.

Secretory expression of recombinant small laccase genes in Gram-positive bacteria

BACKGROUND

Laccases are multicopper enzymes that oxidize a wide range of aromatic and non-aromatic compounds in the presence of oxygen. The majority of industrially relevant laccases are derived from fungi and are produced in eukaryotic expression systems such as Pichia pastoris and Saccharomyces cerevisiae. Bacterial laccases for research purposes are mostly produced intracellularly in Escherichia coli, but secretory expression systems are needed for future applications. Bacterial laccases from Streptomyces spp. are of interest for potential industrial applications because of their lignin degrading activities.

RESULTS

In this study, we expressed small laccases genes from Streptomyces coelicolor, Streptomyces viridosporus and Amycolatopsis 75iv2 with their native signal sequences in Gram-positive Bacillus subtilis and Streptomyces lividans host organisms. The extracellular activities of ScLac, SvLac and AmLac expressed in S. lividans reached 1950 ± 99 U/l, 812 ± 57 U/l and 12 ± 1 U/l in the presence of copper supplementation. The secretion of the small laccases was irrespective of the copper supplementation; however, activities upon reconstitution with copper after expression were significantly lower, indicating the importance of copper during laccase production. The production of small laccases in B. subtilis resulted in extracellular activity that was significantly lower than in S. lividans. Unexpectedly, AmLac and ScLac were secreted without their native signal sequences in B. subtilis, indicating that B. subtilis secretes some heterologous proteins via an unknown pathway.

CONCLUSIONS

Small laccases from S. coelicolor, S. viridosporus and Amycolatopsis 75iv2 were secreted in both Gram-positive expression hosts B. subtilis and S. lividans, but the extracellular activities were significantly higher in the latter.

Evaluation of new L-amino acids triethanolammonium salts usability for controlling protease activity

Twenty new triethanolammonium amino acid salts (TEA AA) have been prepared from triethanolammonium hydroxide and L-amino acids. The physicochemical properties of TEA AA depended on the applied amino acid. Five of the synthesised salts, i.e. mono- and bis-salts of L-glutamic acid, L-aspartic acid, and TEA salt of l-glutamine were solids with melting points between 127.32 °C to 171.51 °C. The other TEA AA exhibited glass transition temperatures from -68.45 °C for TEA Ser to -6.27 °C for TEA Trp and were assigned as amino acid ionic liquids (AAILs). The TEA His was characterised by the highest thermal stability, with an average temperature of 5 % weight loss at 186.4 °C, whereas the lowest stability was determined for TEA Asp (107.5 °C). The developed salts were tested as reaction medium additives for proteolytic enzymes (papain, subtilisin, bromelain). Most AAILs showed an inhibitory effect on tested proteases but with different mechanisms related to the enzyme substrate specificity and structural diversity. The TEA Ser was the most effective competitive inhibitor (K_i = 0.24 10^-4 mol/L) for bromelain, while TEA Val uncompetitive inhibitor for papain (K_i = 0.25 10^-4 mol/L). The developed TEA AA salts exhibit potential as enzyme-controlling agents for use in industrial processes.

Modular Engineering to Enhance Keratinase Production for Biotransformation of Discarded Feathers

Biotransformation of wasted feathers via feather-degrading enzyme has gained immense popularity, low conversion efficiency hinders its scale application, and the main purpose of this study is to improve feather-degrading enzyme production in Bacillus licheniformis. Firstly, keratinase from Bacillus amyloliquefaciens K11 was attained with the best performance for feather hydrolysis, via screening several extracellular proteases from Bacillus; also, feather powder was proven as the most suitable substrate for determination of feather-degrading enzyme activity. Then, expression elements, including signal peptides and promoters, were optimized, and the combination of signal peptide SP_SacC with promoter Pdual3 owned the best performance, keratinase activity aggrandized by 6.21-fold. According to amino acid compositions of keratinase and feeding assays, Ala, Val, and Ser were proven as critical precursors, and strengthening these precursors' supplies via metabolic pathway optimization resulted in a 33.59% increase in the keratinase activity. Furthermore, keratinase activity reached 2210.66 U/mL, up to 56.74-fold from the original activity under the optimized fermentation condition in 3-L fermentor. Finally, the biotransformation process of discarded feathers by the fermented keratinase was optimized, and our results indicated that 90.94% of discarded feathers (16%, w/v) were decomposed in 12 h. Our results suggested that strengthening precursor amino acids' supplies was an efficient strategy for enhanced production of keratinase, and this research provided an efficient strain as well as the biotransformation process for discarded feather re-utilization.

Signal Peptide Efficiency: From High-Throughput Data to Prediction and Explanation

The passage of proteins across biological membranes via the general secretory (Sec) pathway is a universally conserved process with critical functions in cell physiology and important industrial applications. Proteins are directed into the Sec pathway by a signal peptide at their N-terminus. Estimating the impact of physicochemical signal peptide features on protein secretion levels has not been achieved so far, partially due to the extreme sequence variability of signal peptides. To elucidate relevant features of the signal peptide sequence that influence secretion efficiency, an evaluation of ∼12,000 different designed signal peptides was performed using a novel miniaturized high-throughput assay. The results were used to train a machine learning model, and a post-hoc explanation of the model is provided. By describing each signal peptide with a selection of 156 physicochemical features, it is now possible to both quantify feature importance and predict the protein secretion levels directed by each signal peptide. Our analyses allow the detection and explanation of the relevant signal peptide features influencing the efficiency of protein secretion, generating a versatile tool for the de novo design and in silico evaluation of signal peptides.

Explore or exploit? A model-based screening strategy for PETase secretion by Corynebacterium glutamicum

Extracellular production of target proteins simplifies downstream processing due to obsolete cell disruption. However, optimal combinations of a heterologous protein, suitable signal peptide, and secretion host can currently not be predicted, resulting in large strain libraries that need to be tested. On the experimental side, this challenge can be tackled by miniaturization, parallelization, and automation, which provide high-throughput screening data. These data need to be condensed into a candidate ranking for decision-making to focus bioprocess development on the most promising candidates. We screened for Bacillus subtilis signal peptides mediating Sec secretion of two polyethylene terephthalate degrading enzymes (PETases), leaf-branch compost cutinase (LCC) and polyester hydrolase mutants, by Corynebacterium glutamicum. We developed a fully automated screening process and constructed an accompanying Bayesian statistical modeling framework, which we applied in screenings for highest activity in 4-nitrophenyl palmitate degradation. In contrast to classical evaluation methods, batch effects and biological errors are taken into account and their uncertainty is quantified. Within only two rounds of screening, the most suitable signal peptide was identified for each PETase. Results from LCC secretion in microliter-scale cultivation were shown to be scalable to laboratory-scale bioreactors. This work demonstrates an experiment-modeling loop that can accelerate early-stage screening in a way that experimental capacities are focused to the most promising strain candidates. Combined with high-throughput cloning, this paves the way for using large strain libraries of several hundreds of strains in a Design-Build-Test-Learn approach.

Enhanced Extracellular Expression of a Ca2+- and Mg2+-Dependent Hyperthermostable Protease EA1 in Bacillus subtilis via Systematic Screening of Optimal Signal Peptides

Proteases have been widely applied in various industries, including tanning, silk, feed, medicine, food, and environmental protection. Herein, the protease EA1 (GenBank accession no. U25630.1) was successfully expressed in Bacillus subtilis and demonstrated to function as a Ca²⁺- and Mg²⁺-dependent hyperthermostable neutral protease. At 80 °C, its half-life (t_1/2) in the presence of 10 mM Mg²⁺ and Ca²⁺ was 50.4-fold longer than that in their absence (7.4 min), which can be explained by structural analysis. Compared with the currently available commercial proteases, protease EA1 has obvious advantages in heat resistance. The largest peptide library was used to enhance the extracellular expression of protease EA1 via constructing and screening 244 signal peptides (SPs). Eleven SPs with high yields of protease EA1 were identified from 5000 clones using a high-throughput assay. Specifically, the enzyme activity of protease produced by the strain (217.6 U/mL) containing the SP XynD was 5.2-fold higher than that of the strain with the initial SP. In brief, the protease is a potential candidate for future use in the high-temperature industry.

A genetic toolkit for efficient production of secretory protein in Bacillus subtilis

Bacillus subtilis is a microbial cell factory widely used to produce recombinant proteins, but the expression of heterologous proteins is often severely hampered. This study constructed a genetic toolkit for improving the secretory efficiency of heterologous proteins in Bacillus subtilis. First, the protease-deficient hosts were reconstructed. Then, two endogenous constitutive promoters, P_hag and P_spovG, were screened. Next, a method called systemic combinatorial optimization of ribosome binding site (RBS) equipped with signal peptide (SCORES) was designed for optimizing the secretion and translation of the heterologous protein. Finally, Serratia marcescens nonspecific endonuclease (SMNE), which causes cell death by degrading nucleic acids, was expressed. The enzyme activity in the shake flask reached 7.5 × 10⁶ U/L, which was 7.5-times that of the control RBS and signal peptide combination (RS0). This study not only expanded on the synthetic biology toolbox in B. subtilis but also provided strategies to create a prokaryotic protein expression system.

Accelerated strain construction and characterization of C. glutamicum protein secretion by laboratory automation

Secretion of bacterial proteins into the culture medium simplifies downstream processing by avoiding cell disruption for target protein purification. However, a suitable signal peptide for efficient secretion needs to be identified, and currently, there are no tools available to predict optimal combinations of signal peptides and target proteins. The selection of such a combination is influenced by several factors, including protein biosynthesis efficiency and cultivation conditions, which both can have a significant impact on secretion performance. As a result, a large number of combinations must be tested. Therefore, we have developed automated workflows allowing for targeted strain construction and secretion screening using two platforms. Key advantages of this experimental setup include lowered hands-on time and increased throughput. In this study, the automated workflows were established for the heterologous production of Fusarium solani f. sp. pisi cutinase in Corynebacterium glutamicum. The target protein was monitored in culture supernatants via enzymatic activity and split GFP assay. Varying spacer lengths between the Shine-Dalgarno sequence and the start codon of Bacillus subtilis signal peptides were tested. Consistent with previous work on the secretory cutinase production in B. subtilis, a ribosome binding site with extended spacer length to up to 12 nt, which likely slows down translation initiation, does not necessarily lead to poorer cutinase secretion by C. glutamicum. The best performing signal peptides for cutinase secretion with a standard spacer length were identified in a signal peptide screening. Additional insights into the secretion process were gained by monitoring secretion stress using the C. glutamicum K9 biosensor strain. KEY POINTS: • Automated workflows for strain construction and screening of protein secretion • Comparison of spacer, signal peptide, and host combinations for cutinase secretion • Signal peptide screening for secretion by C. glutamicum using the split GFP assay.

Production, Optimization, and Partial Purification of Alkali-Thermotolerant Proteases from Newly Isolated Bacillus subtilis S1 and Bacillus amyloliquefaciens KSM12

Proteases that can remain active under extreme conditions such as high temperature, pH, and salt concentration are widely applicable in the commercial sector. The majority of the proteases are rendered useless under harsh conditions in industries. Therefore, there is a need to search for new proteases that can tolerate and function in harsh conditions, thus improving their commercial value. In this study, 142 bacterial isolates were isolated from diverse alkaline soil habitats. The two highest protease-producing bacterial isolates were identified as Bacillus subtilis S1 and Bacillus amyloliquefaciens KSM12, respectively, based on 16S rRNA sequencing. Optimal protease production was detected at pH 8, 37 °C, 48 h, 5% (w/v) NaCl for Bacillus subtilis S1 (99.8 U/mL) and pH 9, 37 °C, 72 h, 10% (w/v) NaCl for Bacillus amyloliquefaciens KSM12 (94.6 U/mL). The molecular weight of these partially purified proteases was then assessed on SDS-PAGE (17 kDa for Bacillus subtilis S1 and 65 kDa for Bacillus amyloliquefaciens KSM12), respectively. The maximum protease activity for Bacillus subtilis S1 was detected at pH 8, 40 °C, and for Bacillus amyloliquefaciens KSM12 at pH 9, 60 °C. These results suggest that the proteases secreted by Bacillus subtilis S1 and Bacillus amyloliquefaciens KSM12 are suitable for industries working in a highly alkaline environment.

Multiple Modular Engineering of Bacillus Amyloliquefaciens Cell Factories for Enhanced Production of Alkaline Proteases From B. Clausii

Bacillus amyloliquefaciens is a generally recognized as safe (GRAS) microorganism that presents great potential for the production of heterologous proteins. In this study, we performed genomic and comparative transcriptome to investigate the critical modular in B. amyloliquefaciens on the production of heterologous alkaline proteases (AprE). After investigation, it was concluded that the key modules affecting the production of alkaline protease were the sporulation germination module (Module I), extracellular protease synthesis module (Module II), and extracellular polysaccharide synthesis module (Module III) in B. amyloliquefaciens. In Module I, AprE yield for mutant BA ΔsigF was 25.3% greater than that of BA Δupp. Combining Module I synergistically with mutation of extracellular proteases in Module II significantly increased AprE production by 36.1% compared with production by BA Δupp. In Module III, the mutation of genes controlling extracellular polysaccharides reduced the viscosity and the accumulation of sediment, and increased the rate of dissolved oxygen in fermentation. Moreover, AprE production was 39.6% higher than in BA Δupp when Modules I, II and III were engineered in combination. This study provides modular engineering strategies for the modification of B. amyloliquefaciens for the production of alkaline proteases.

An updated review of functional properties, debittering methods, and applications of soybean functional peptides

Soybean functional peptides (SFPs) are obtained via the hydrolysis of soybean protein into polypeptides, oligopeptides, and a small amount of amino acids. They have nutritional value and a variety of functional properties, including regulating blood lipids, lowering blood pressure, anti-diabetes, anti-oxidant, preventing COVID-19, etc. SFPs have potential application prospects in food processing, functional food development, clinical medicine, infant milk powder, special medical formulations, among others. However, bitter peptides containing relatively more hydrophobic amino acids can be formed during the production of SFPs, seriously restricting the application of SFPs. High-quality confirmatory human trials are needed to determine effective doses, potential risks, and mechanisms of action, especially as dietary supplements and special medical formulations. Therefore, the physiological activities and potential risks of soybean polypeptides are summarized, and the existing debitterness technologies and their applicability are reviewed. The technical challenges and research areas to be addressed in optimizing debittering process parameters and improving the applicability of SFPs are discussed, including integrating various technologies to obtain higher quality functional peptides, which will facilitate further exploration of physiological mechanism, metabolic pathway, tolerance, bioavailability, and potential hazards of SFPs. This review can help promote the value of SFPs and the development of the soybean industry.

Construction and Application of a Plasmid-Based Signal Peptide Library for Improved Secretion of Recombinant Proteins with Priestia megaterium

The secretion of recombinant proteins plays an important role in their economic production and purification. The secretion efficiency depends on the responsible signal peptide (SP) in combination with the target protein and the given host and cannot be predicted so far. Due to its high plasmid stability, the lack of alkaline extracellular proteases and only few contaminating extracellular host proteins, Priestia megaterium provides a promising alternative to common Bacillus species. For the development of an easy and fast cloning and screening system to identify the SP best suited to a distinct protein, a plasmid-based SP library containing all predicted 182 Sec-dependent SPs from P. megaterium was established. The splitting of the SPs into 10 groups of individual multi-SP plasmids (pMSPs) allows their grouped amplification and application in screening approaches. The functionality of the whole library was demonstrated by enhancing the amount of the already well-secreted α-amylase AmyE by 1.6-fold. The secretion of a novel penicillin G acylase, which remained as insoluble protein inside the cells, as its native SP is unsuitable for secretion in P. megaterium, could be enhanced even up to 29-fold. Overall, only around 170 recombinant P. megaterium clones based on 50 inserted SPs had to be screened to achieve sufficient amounts for further enzyme characterizations. Thus, this newly developed plasmid-based genetic tool applicable for P. megaterium and also other Bacillus species facilitates the identification of suitable SPs for secretion of recombinant proteins.

Enhanced production of poly-γ-glutamic acid via optimizing the expression cassette of Vitreoscilla hemoglobin in Bacillus licheniformis

Poly-γ-glutamic acid (γ-PGA) is a natural polymer with various applications, and its high-viscosity hinders oxygen transmission and improvement of synthesis level. Vitreoscilla hemoglobin (VHB) has been introduced into various hosts as oxygen carrier, however, its expression strength and contact efficiency with oxygen hindered efficient oxygen transfer and metabolite synthesis. Here, we want to optimize the expression cassette of VHB for γ-PGA production. Firstly, our results implied that γ-PGA yields were enhanced when introducing twin-arginine translocation (Tat) signal peptides (SP_YwbN, SP_PhoD and SP_TorA) into VHB expression cassette, and the best performance was attained by SP_YwbN from Bacillus subtilis, the γ-PGA yield of which was 18.53% higher than that of control strain, and intracellular ATP content and oxygen transfer coefficient (K_La) were increased by 29.71% and 73.12%, respectively, indicating that VHB mediated by SP_YwbN benefited oxygen transfer and ATP generation for γ-PGA synthesis. Furthermore, four promoters were screened, and P_vgb was proven as the more suitable promoter for VHB expression and γ-PGA synthesis, and γ-PGA yield of attaining strain WX/pPvgb-YwbN-Vgb was further increased to 40.59 g/L by 10.18%. Finally, WX/pPvgb-YwbN-Vgb was cultivated in 3 L fermentor for fed-batch fermentation, and 46.39 g/L γ-PGA was attained by glucose feeding, increased by 49.26% compared with the initial yield (31.01 g/L). Taken together, this study has attained an efficient VHB expression cassette for oxygen transfer and γ-PGA synthesis, which could also be applied in the production of other metabolites.

Genome-wide high-throughput signal peptide screening via plasmid pUC256E improves protease secretion in Lactiplantibacillus plantarum and Pediococcus acidilactici

BACKGROUND

Proteases catalyze the hydrolysis of peptide bonds of proteins, thereby improving dietary protein digestibility, nutrient availability, as well as flavor and texture of fermented food and feed products. The lactobacilli Lactiplantibacillus plantarum (formerly Lactobacillus plantarum) and Pediococcus acidilactici are widely used in food and feed fermentations due to their broad metabolic capabilities and safe use. However, extracellular protease activity in these two species is low. Here, we optimized protease expression and secretion in L. plantarum and P. acidilactici via a genetic engineering strategy.

RESULTS

To this end, we first developed a versatile and stable plasmid, pUC256E, which can propagate in both L. plantarum and P. acidilactici. We then confirmed expression and secretion of protease PepG1 as a functional enzyme in both strains with the aid of the previously described L. plantarum-derived signal peptide LP_0373. To further increase secretion of PepG1, we carried out a genome-wide experimental screening of signal peptide functionality. A total of 155 predicted signal peptides originating from L. plantarum and 110 predicted signal peptides from P. acidilactici were expressed and screened for extracellular proteolytic activity in the two different strains, respectively. We identified 12 L. plantarum signal peptides and eight P. acidilactici signal peptides that resulted in improved yield of secreted PepG1. No significant correlation was found between signal peptide sequence properties and its performance with PepG1.

CONCLUSION

The vector developed here provides a powerful tool for rapid experimental screening of signal peptides in both L. plantarum and P. acidilactici. Moreover, the set of novel signal peptides identified was widely distributed across strains of the same species and even across some closely related species. This indicates their potential applicability also for the secretion of other proteins of interest in other L. plantarum or P. acidilactici host strains. Our findings demonstrate that screening a library of homologous signal peptides is an attractive strategy to identify the optimal signal peptide for the target protein, resulting in improved protein export.

The ProUSER2.0 Toolbox: Genetic Parts and Highly Customizable Plasmids for Synthetic Biology in Bacillus subtilis

Versatile DNA assembly standards and compatible, well-characterized part libraries are essential tools for creating effective designs in synthetic biology. However, to date, vector standards for Gram-positive hosts have limited flexibility. As a result, users often revert to PCR-based methods for building the desired genetic constructs. These methods are inherently prone to introducing mutations, which is problematic considering vector backbone parts are often left unsequenced in cloning workflows. To circumvent this, we present the ProUSER2.0 toolbox: a standardized vector platform for building both integrative and replicative shuttle vectors forBacillus subtilis. The ProUSER2.0 vectors consist of a ProUSER cassette for easy and efficient insertion of cargo sequences and six exchangeable modules. Furthermore, the standard is semicompatible with several previously developed standards, allowing the user to utilize the parts developed for these. To provide parts for the toolbox, seven novel integration sites and six promoters were thoroughly characterized in B. subtilis. Finally, the capacity of the ProUSER2.0 system was demonstrated through the construction of signal peptide libraries for two industrially relevant proteins. Altogether, the ProUSER2.0 toolbox is a powerful and flexible framework for use in B. subtilis.

Biosensor-Based Optimization of Cutinase Secretion by Corynebacterium glutamicum

The industrial microbe Corynebacterium glutamicum is gaining substantial importance as a platform host for recombinant protein secretion. We recently developed a fluorescence-based (eYFP) C. glutamicum reporter strain for the quantification of Sec-dependent protein secretion by monitoring the secretion-related stress response and now demonstrate its applicability in optimizing the secretion of the heterologous enzyme cutinase from Fusarium solani pisi. To drive secretion, either the poor-performing PelSP or the potent NprESP Sec signal peptide from Bacillus subtilis was used. To enable easy detection and quantification of the secreted cutinase we implemented the split green fluorescent protein (GFP) assay, which relies on the GFP11-tag fused to the C-terminus of the cutinase, which can complement a truncated GFP thereby reconstituting its fluorescence. The reporter strain was transformed with different mutant libraries created by error-prone PCR, which covered the region of the signal peptide and the N-terminus of the cutinase. Fluorescence-activated cell sorting (FACS) was performed to isolate cells that show increased fluorescence in response to increased protein secretion stress. Five PelSP variants were identified that showed a 4- to 6-fold increase in the amount and activity of the secreted cutinase (up to 4,100 U/L), whereas two improved NprESP variants were identified that showed a ∼35% increase in secretion, achieving ∼5,500 U/L. Most of the isolated variants carried mutations in the h-region of the signal peptide that increased its overall hydrophobicity. Using site-directed mutagenesis it was shown that the combined mutations F11I and P16S within the hydrophobic core of the PelSP are sufficient to boost cutinase secretion in batch cultivations to the same level as achieved by the NprESP. Screening of a PelSP mutant library in addition resulted in the identification of a cutinase variant with an increased specific activity, which was attributed to the mutation A85V located within the substrate-binding region. Taken together the biosensor-based optimization approach resulted in a substantial improvement of cutinase secretion by C. glutamicum, and therefore represents a valuable tool that can be applied to any secretory protein of interest.

The iSplit GFP assay detects intracellular recombinant proteins in Bacillus subtilis

BACKGROUND

Bacillus subtilis is one of the most important microorganisms for recombinant protein production. It possesses the GRAS (generally recognized as safe) status and a potent protein secretion capacity. Secretory protein production greatly facilitates downstream processing and thus significantly reduces costs. However, not all heterologous proteins are secreted and intracellular production poses difficulties for quantification. To tackle this problem, we have established a so-called intracellular split GFP (iSplit GFP) assay in B. subtilis as a tool for the in vivo protein detection during expression in batch cultures and at a single-cell level. For the iSplit GFP assay, the eleventh β-sheet of sfGFP is fused to a target protein and can complement a detector protein consisting of the respective truncated sfGFP (GFP1-10) to form fluorescent holo-GFP.

RESULTS

As proof of concept, the GFP11-tag was fused C-terminally to the E. coli β-glucuronidase GUS, resulting in fusion protein GUS11. Variable GUS and GUS11 production levels in B. subtilis were achieved by varying the ribosome binding site via spacers of increasing lengths (4-12 nucleotides) for the GUS-encoding gene. Differences in intracellular enzyme accumulation were determined by measuring the GUS11 enzymatic activity and subsequently by adding the detector protein to respective cell extracts. Moreover, the detector protein was co-produced with the GUS11 using a two-plasmid system, which enabled the in vivo detection and online monitoring of glucuronidase production. Using this system in combination with flow cytometry and microfluidics, we were able to monitor protein production at a single-cell level thus yielding information about intracellular protein distribution and culture heterogeneity.

CONCLUSION

Our results demonstrate that the iSplit GFP assay is suitable for the detection, quantification and online monitoring of recombinant protein production in B. subtilis during cultivation as well as for analyzing production heterogeneity and intracellular localization at a single-cell level.

Bioinformatics analysis of extracellular subtilisin E from Bacillus subtilis

Bacillus spp. are the main sources of subtilisin E, which has several applications in biotechnology. The 3D structure of subtilisin E has a significant impact on its efficacy. In this study, we evaluated subtilisin E from Bacillus subtilis subsp. subtilis str. 168 by bioinformatic methods. The results revealed that the subtilisin E sequence from B. subtilis contains highly conserved amino acids, including histidine (H), aspartic acid (D) and serine (S). Subtilisin E cleaves the bonds between hydrophobic and polar amino acids in keratin-associated proteins. The effects of point mutations on the crystal structure of subtilisin E (PDB ID: 1SCJ) showed that changes of asparagine 123 (N123) to valine (V) and serine 331 (S331) to leucine (L) respectively, were the most stabilizing. Genomic analysis of the subtilisin E-coding gene (aprE) indicated that this gene and the yhfN gene are expressed through a σA promoter. The analysis of TBFs revealed AbrB, ScoC, DegU, Hpr, σA, SinR, TenA, and DegU as relevant regulators of aprE expression. Phylogenetic analysis showed that subtilisin Es have highly conserved structures among Bacillus spp., sharing a common ancestor, where their coding genes were duplicated and evolved within the Bacillus spp. As the conclusion, our in silico study demonstrated that the overexpression of the aprE gene and stability of the produced subtilisin E can be improved though system biology methods such as point mutations and identifying the involved transcription factors (TFs) or/and TBFs.Communicated by Ramaswamy H. Sarma.

β-Galactosidase: From its source and applications to its recombinant form

Carbohydrate-active enzymes are a group of important enzymes playing a critical role in the degradation and synthesis of carbohydrates. Glycosidases can hydrolyze glycosides into oligosaccharides, polysaccharides, and glycoconjugates via a cost-effective approach. Lactase is an important member of β-glycosidases found in higher plants, animals, and microorganisms. β-Galactosidases can be used to degrade the milk lactose for making lactose-free milk, which is sweeter than regular milk and is suitable for lactose-intolerant people. β-Galactosidase is employed by many food industries to degrade lactose and improve the digestibility, sweetness, solubility, and flavor of dairy products. β-Galactosidase enzymes have various families and are applied in the food-processing industries such as hydrolyzed-milk products, whey, and galactooligosaccharides. Thus, this enzyme is a valuable protein which is now produced by recombinant technology. In this review, origins, structure, recombinant production, and critical modifications of β-galactosidase for improving the production process are discussed. Since β-galactosidase is a valuable enzyme in industry and health care, a study of its various aspects is important in industrial biotechnology and applied biochemistry.

Engineering Halomonas bluephagenesis as a chassis for bioproduction from starch

Halomonas bluephagenesis has been successfully engineered to produce multiple products under open unsterile conditions utilizing costly glucose as the carbon source. It would be highly interesting to investigate if H. bluephagenesis, a chassis for the Next Generation Industrial Biotechnology (NGIB), can be reconstructed to become an extracellular hydrolytic enzyme producer replacing traditional enzyme producer Bacillus spp. If successful, cost of bulk hydrolytic enzymes such as amylase and protease, can be significantly reduced due to the contamination resistant and robust growth of H. bluephagenesis. This also allows H. bluephagenesis to be able to grow on low cost substrates such as starch. The modularized secretion machinery was constructed and fine-tuned in H. bluephagenesis using codon-optimized gene encoding α-amylase from Bacillus lichenifomis. Screening of suitable signal peptides and linkers based on super-fold green fluorescence protein (sfGFP) for enhanced expression in H. bluephagenesis resulted in a 7-fold enhancement of sfGFP secretion in the recombinant H. bluephagenesis. When the gene encoding sfGFP was replaced by α-amylase encoding gene, recombinant H. bluephagenesis harboring this amylase secretory system was able to produce poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-4-hydroxybutyrate) (P34HB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), ectoine and L-threonine utilizing starch as the growth substrate, respectively. Recombinant H. bluephagenesis TN04 expressing genes encoding α-amylase and glucosidase on chromosome and plasmid-based systems, respectively, was able to grow on corn starch to approximately 10 g/L cell dry weight containing 51% PHB when grown in shake flasks. H. bluephagenesis was demonstrated to be a chassis for productions of extracellular enzymes and multiple products from low cost corn starch.

High-Throughput Optimization of Recombinant Protein Production in Microfluidic Gel Beads

Efficient production hosts are a key requirement for bringing biopharmaceutical and biotechnological innovations to the market. In this work, a truly universal high-throughput platform for optimization of microbial protein production is described. Using droplet microfluidics, large genetic libraries of strains are encapsulated into biocompatible gel beads that are engineered to selectively retain any protein of interest. Bead-retained products are then fluorescently labeled and strains with superior production titers are isolated using flow cytometry. The broad applicability of the platform is demonstrated by successfully culturing several industrially relevant bacterial and yeast strains and detecting peptides or proteins of interest that are secreted or released from the cell via autolysis. Lastly, the platform is applied to optimize cutinase secretion in Komagataella phaffii (Pichia pastoris) and a strain with 5.7-fold improvement is isolated. The platform permits the analysis of >10⁶ genotypes per day and is readily applicable to any protein that can be equipped with a His₆ -tag. It is envisioned that the platform will be useful for large screening campaigns that aim to identify improved hosts for large-scale production of biotechnologically relevant proteins, thereby accelerating the costly and time-consuming process of strain engineering.

Reducing the cell lysis to enhance yield of acid-stable alpha amylase by deletion of multiple peptidoglycan hydrolase-related genes in Bacillus amyloliquefaciens

Bacillus amyloliquefaciens is a major industrial host for extracellular protein production, with great potential in the enzyme industry. However, the strain has accelerated the autolysis drawback in the process of secreting extracellular enzymes, which can significantly lower the density of cells and decrease the product yield. To identify target genes, we employed comparative transcriptome sequencing and KEGG analysis to indicate the increased expression of peptidoglycan hydrolase-regulated genes from the exponential phase to the apoptotic phase of growth; this was further confirmed by quantitative RT-PCR. By deleting lytD, lytE, and sigD genes, cell lysis was reduced and the production of acid-stable Bacillus licheniformis alpha-amylase was enhanced. After 36 h of culture, multiple deletion mutant BA ΔSDE had significantly more viable cells compared to the control strain BA Δupp, and flow cytometry analysis indicated that 48.43% and 64.03% of the cells were lysed in cultures of BA ΔSDE and BA Δupp, respectively. In a 2-L fed-batch fermenter, viable cell number of the triple deletion mutant BA ΔSDE increased by 2.79 Log/cfu/mL, and the activity of acid-stable alpha-amylase increased by 48.4%, compared to BA Δupp. Systematic multiple peptidoglycan hydrolases deletion relieved the autolysis and increased the production of industrial enzymes, and provided a useful strategy for guiding efforts to manipulate the genomes of other B. amyloliquefaciens used for chassis host.

Signal Peptides Generated by Attention-Based Neural Networks

Short (15-30 residue) chains of amino acids at the amino termini of expressed proteins known as signal peptides (SPs) specify secretion in living cells. We trained an attention-based neural network, the Transformer model, on data from all available organisms in Swiss-Prot to generate SP sequences. Experimental testing demonstrates that the model-generated SPs are functional: when appended to enzymes expressed in an industrial Bacillus subtilis strain, the SPs lead to secreted activity that is competitive with industrially used SPs. Additionally, the model-generated SPs are diverse in sequence, sharing as little as 58% sequence identity to the closest known native signal peptide and 73% ± 9% on average.

The length of ribosomal binding site spacer sequence controls the production yield for intracellular and secreted proteins by Bacillus subtilis

BACKGROUND

Bacillus subtilis is widely used for the industrial production of recombinant proteins, mainly due to its high secretion capacity, but higher production yields can be achieved only if bottlenecks are removed. To this end, a crucial process is translation initiation which takes place at the ribosome binding site enclosing the Shine Dalgarno sequence, the start codon of the target gene and a short spacer sequence in between. Here, we have studied the effects of varying spacer sequence lengths in vivo on the production yield of different intra- and extracellular proteins.

RESULTS

The shuttle vector pBSMul1 containing the strong constitutive promoter P_HpaII and the optimal Shine Dalgarno sequence TAAGGAGG was used as a template to construct a series of vectors with spacer lengths varying from 4 to 12 adenosines. For the intracellular proteins GFPmut3 and β-glucuronidase, an increase of spacer lengths from 4 to 7-9 nucleotides resulted in a gradual increase of product yields up to 27-fold reaching a plateau for even longer spacers. The production of secreted proteins was tested with cutinase Cut and swollenin EXLX1 which were N-terminally fused to one of the Sec-dependent signal peptides SPPel, SPEpr or SPBsn. Again, longer spacer sequences resulted in up to tenfold increased yields of extracellular proteins. Fusions with signal peptides SPPel or SPBsn revealed the highest production yields with spacers of 7-10nt length. Remarkably, fusions with SPEpr resulted in a twofold lower production yield with 6 or 7nt spacers reaching a maximum with 10-12nt spacers. This pattern was observed for both secreted proteins fused to SPEpr indicating a dominant role also of the nucleotide sequence encoding the respective signal peptide for translation initiation. This conclusion was corroborated by RT qPCR revealing only slightly different amounts of transcript. Also, the effect of a putative alternative translation initiation site could be ruled out.

CONCLUSION

Our results confirm the importance of the 5' end sequence of a target gene for translation initiation. Optimizing production yields thus may require screenings for optimal spacer sequence lengths. In case of secreted proteins, the 5' sequence encoding the signal peptide for Sec-depended secretion should also be considered.

Establishment of a functional system for recombinant production of secreted proteins at 50 °C in the thermophilic Bacillus methanolicus

BACKGROUND

The suitability of bacteria as microbial cell factories is dependent on several factors such as price of feedstock, product range, production yield and ease of downstream processing. The facultative methylotroph Bacillus methanolicus is gaining interest as a thermophilic cell factory for production of value-added products from methanol. The aim of this study was to expand the capabilities of B. methanolicus as a microbial cell factory by establishing a system for secretion of recombinant proteins.

RESULTS

Native and heterologous signal peptides were tested for secretion of α-amylases and proteases, and we have established the use of the thermostable superfolder green fluorescent protein (sfGFP) as a valuable reporter protein in B. methanolicus. We demonstrated functional production and secretion of recombinant proteases, α-amylases and sfGFP in B. methanolicus MGA3 at 50 °C and showed that the choice of signal peptide for optimal secretion efficiency varies between proteins. In addition, we showed that heterologous production and secretion of α-amylase from Geobacillus stearothermophilus enables B. methanolicus to grow in minimal medium with starch as the sole carbon source. An in silico signal peptide library consisting of 169 predicted peptides from B. methanolicus was generated and will be useful for future studies, but was not experimentally investigated any further here.

CONCLUSION

A functional system for recombinant production of secreted proteins at 50 °C has been established in the thermophilic B. methanolicus. In addition, an in silico signal peptide library has been generated, that together with the tools and knowledge presented in this work will be useful for further development of B. methanolicus as a host for recombinant protein production and secretion at 50 °C.

Engineering Expression Cassette of pgdS for Efficient Production of Poly-γ-Glutamic Acids With Specific Molecular Weights in Bacillus licheniformis

Poly-γ-glutamic acid (γ-PGA) is an emerging biopolymer with various applications and γ-PGAs with different molecular weights exhibit distinctive properties. However, studies on the controllable molecular weights of biopolymers are limited. The purpose of this study is to achieve production of γ-PGAs with a wide range of molecular weights through manipulating the expression of γ-PGA depolymerase (PgdS) in Bacillus licheniformis WX-02. Firstly, the expression and secretion of PgdS were regulated through engineering its expression elements (four promoters and eight signal peptides), which generated γ-PGAs with molecular weights ranging from 6.82 × 10⁴ to 1.78 × 10⁶ Da. Subsequently, through combination of promoters with signal peptides, the production of γ-PGAs with a specific molecular weight could be efficiently obtained. Interestingly, the γ-PGA yield increased with the reduced molecular weight in flask cultures (Pearson correlation coefficient of −0.968, P < 0.01). Finally, in batch fermentation, the highest yield of γ-PGA with a weight-average molecular weight of 7.80 × 10⁴ Da reached 39.13 g/L under glutamate-free medium. Collectively, we developed an efficient strategy for one-step production of γ-PGAs with specific molecular weights, which have potential application for industrial production of desirable γ-PGAs.

Efficient Genome Editing in Bacillus licheniformis Mediated by a Conditional CRISPR/Cas9 System

Bacillus licheniformis is widely used to produce multiple enzymes and chemicals in industrial fermentation. It is also an organism that is hard to genetically manipulate, which is mainly attributed to its extremely low transformation efficiency. The lack of genetic modification technology severely limits its further application. In this study, an all-in-one conditional clustered regularly interspaced short palindromic repeat (CRISPR)/Cas9 plasmid was developed for B. licheniformis with the cas9 gene under the control of a xylose-inducible promoter. By means of this design, the expression of the cas9 gene could be repressed without xylose, which significantly improved the transformation ratio from less than 0.1 cfu/μg to 2.42 cfu/μg DNA. Compared with this conditional system, a constitutive overexpression system led to significant growth retardation in bacterial cells. Both the biomass and specific growth rate decreased greatly. After transformation, successful genome editing could be triggered by 0.5% xylose. When the α-amylase gene amyL was used as a genomic target, the efficiencies of its disruption using three different protospacer-adjacent motif (PAM) sequences were 64.3%, 70.9%, and 47.1%, respectively. Moreover, temperature plays a pivotal role in the function of the constructed CRISPR system. The maximum success rate reached 97% at 20 °C, while higher temperatures negatively impacted the function of the system. These results suggested that the design with a cas9 gene under the strict control of a xylose-inducible promoter significantly improved the success rate of genome editing in this host. This work contributes to the development of genetic manipulation and furthers the use of B. licheniformis as an efficient industrial workhorse.

Recent Advances in Recombinant Protein Production byBacillus subtilis

Bacillus subtilis has become a widely used microbial cell factory for the production of recombinant proteins, especially those associated with foods and food processing. Recent advances in genetic manipulation and proteomic analysis have been used to greatly improve protein production in B. subtilis. This review begins with a discussion of genome-editing technologies and application of the CRISPR–Cas9 system to B. subtilis. A summary of the characteristics of crucial legacy strains is followed by suggestions regarding the choice of origin strain for genetic manipulation. Finally, the review analyzes the genes and operons of B. subtilis that are important for the production of secretory proteins and provides suggestions and examples of how they can be altered to improve protein production. This review is intended to promote the engineering of this valuable microbial cell factory for better recombinant protein production.

Extracellular production of active-form Streptomyces mobaraensis transglutaminase in Bacillus subtilis

Transglutaminase (TG) from Streptomyces mobaraensis has been widely used in the food industry. It is secreted naturally as an inactive zymogen, which is then activated by the removal of the N-terminal pro-peptide. In this study, the mtg gene from S. mobaraensis was expressed in a food-grade strain of bacterium, Bacillus subtilis. When its native signal peptide was replaced by signal peptide SacB (SP_sacB) and the pro-peptide was replaced by that derived from S. hygroscopicus, an extracellular activity of 16.1 U/mg was observed. A modified Saccharomyces cerevisiae vacuolar ATPase subunit (VMA) intein was introduced into the zymogen to simplify its activation process by controlling temperature. When the cleavage site in the C-terminal of VMA was placed between the pro-peptide and core domain, the activation process was carried out at 18 °C. Promoter replacement further increased the enzymatic activity. Finally, the extracellular enzymatic activity reached 2.6 U/mg under the control of the constitutive promoter P_yvyD. This is the first report on the extracellular production of active-form Streptomyces TG in B. subtilis without splicing with the cleavage enzyme.