Integrity of proteins in human saliva after sterilization by gamma irradiation

Limosilactobacillus reuteri DSM 17938 Inhibition of Biofilm Formation by Prevotella intermedia and Fusobacterium nucleatum Across Salivary pH: An In Vitro Study

OBJECTIVES

 This study aims to investigate Limosilactobacillus reuteri DSM 17938's antibiofilm effects on Prevotella intermedia and Fusobacterium nucleatum, common causes of alveolar osteitis. It seeks topical alternatives to prevent this condition posttooth extraction. The secondary objective is to assess these effects under different pH conditions (pH 4.5 and pH 7), mimicking oral cavity saliva pH dynamics.

MATERIALS AND METHODS

 Ethical approval was secured for the saliva collection process involving five healthy adult participants who had undergone wisdom tooth extraction. Saliva samples were diligently collected on the 7th day post-surgery. The unstimulated saliva underwent a series of treatments, including the addition of phenylmethylsulfonyl fluoride (PMSF), pH adjustments, centrifugation, and filtration. The pH levels were re-measured, and subsequent adjustments were made to achieve pH values of 4.5 or 7. Limosilactobacillus reuteri DSM 17938, with a concentration of 1×108 colony-forming units (CFU) per 5 drops, was utilized in the study. Biofilm testing involved incubating saliva samples with varying pH (4.5 or 7) alongside bacterial suspensions (Prevotella intermedia, Fusobacterium nucleatum, or a mixed species). The Interlac suspension was introduced, and plates were anaerobically incubated for 24 hours. Biofilm results were obtained using a spectrometer. The test is conducted in triplicate.

STATISTICAL ANALYSIS

 To scrutinize the impact of pH on biofilm development, the acquired data underwent a two-way ANOVA test in SPSS as part of the statistical analysis. A significance level of p<0.05 was used to determine statistical significance.

RESULTS

 Limosilactobacillus reuteri DSM 17938 significantly reduced biofilm formation across bacterial strains (p = 0.000). Statistical analysis indicated a significant impact of pH on biofilm development (p = 0.000) compared to no saliva samples, with higher formation observed under acidic conditions (pH 4.5). However, the pH levels of 4.5 and 7 did not result in significantly different bacterial biofilm formation (p = 0.529).

CONCLUSION

 This research highlights Limosilactobacillus reuteri DSM 17938's potency in inhibiting biofilm formation of Prevotella intermedia and Fusobacterium nucleatum. Salivary pH variations significantly influence biofilm development, emphasizing the need to consider pH when assessing probiotic effectiveness. Despite limitations in saliva sample sterilization, this study provides valuable insights into alternative approaches for preventing alveolar osteitis. Further research should explore clinical applications and refine sterilization methods for more accurate results.

Structure-based modification of a-amylase by conventional and emerging technologies: Comparative study on the secondary structure, activity, thermal stability and amylolysis efficiency

α-Amylase is an endo-enzyme that catalyzes the hydrolysis of starch into shorter oligosaccharides. α-Amylase plays a crucial role in various industries. Manipulated α-amylases are of particular interest due to their remarkable amylolysis efficiency and thermostability for large-scale biotechnological processes. The retained catalytic activity of enzymes is decreased according to extreme pH, temperature, pressure, and chemical reagents. Broad industrial applications of α-amylases need special properties such as stability against temperature, pH, and chelators, and also attain reusability, desirable enzymatic activity, efficiency, and selectivity. Considering the biotechnological importance of α-amylase, its high stability is the most critical challenge for its economic viability. Therefore, improving its functionality and stability recently gained much interest. To achieve this purpose, various emerging technologies in combination with conventional methods on α-Amylases with different sources have been conducted. The present review is an attempt to summarize the effect of various conventional methods and emerging technologies employed to date on α-amylase secondary structure, thermal stability, and performance.

Effect of Processing Methods of Human Saliva on the Proteomic Profile and Protein-Mediated Biological Processes

The use of saliva as a protein source prior to microbiological and biological assays requires previous processing. However, the effect of these processing methods on the proteomic profile of saliva has not been tested. Stimulated human saliva was collected from eight healthy volunteers. Non-processed saliva was compared with 0.22 μm filtered, 0.45 μm filtered, and pasteurized saliva, by liquid chromatography-mass spectrometry. Data are available via ProteomeXchange with identifier PXD039248. The effect of processed saliva on microbial adhesion was tested using bacterial and fungus species and in biological cell behavior using HaCaT immortalized human keratinocytes. Two hundred and seventy-eight proteins were identified in non-processed saliva, of which 54 proteins (≈19%) were exclusive. Saliva processing reduced identified proteins to 222 (≈80%) for the 0.22 μm group, 219 (≈79%) for the 0.45 μm group, and 201 (≈72%) for the pasteurized saliva, compared to non-processed saliva. The proteomic profile showed similar molecular functions and biological processes. The different saliva processing methods did not alter microbial adhesion (ANOVA, p > 0.05). Interestingly, pasteurized saliva reduced keratinocyte cell viability. Saliva processing methods tested reduced the proteomic profile diversity of saliva but maintained similar molecular functions and biological processes, not interfering with microbial adhesion and cell viability, except for pasteurization, which reduced cell viability.

Effect of Surface Tooling Techniques of Medical Titanium Implants on Bacterial Biofilm Formation In Vitro

The aim of this study was to assess the biofilm formation of Streptococcus mutans, Staphylococcus aureus, Enterococcus faecalis, and Escherichia coli on titanium implants with CAD-CAM tooling techniques. Twenty specimens of titanium were studied: Titanium grade 2 tooled with a Planmeca CAD-CAM milling device (TiGrade 2), Ti6Al4V grade 5 as it comes from CAD-DMLS device (computer aided design-direct metal laser sintering device) (TiGrade 5), Ti6Al4V grade 23 as it comes from a CAD-CAM milling device (TiGrade 23), and CAD-DMLS TiGrade 5 polished with an abrasive disc (TiGrade 5 polished). Bacterial adhesion on the implants was completed with and without saliva treatment to mimic both extraoral and intraoral surgical methods of implant placement. Five specimens/implant types were used in the bacterial adhesion experiments. Autoclaved implant specimens were placed in petri plates and immersed in saliva solution for 30 min at room temperature and then washed 3×with 1 ×PBS. Bacterial suspensions of each strain were made and added to the specimens after saliva treatment. Biofilm was allowed to form for 24 h at 37 °C and the adhered bacteria was calculated. Tooling techniques had an insignificant effect on the bacterial adhesion by all the bacterial strains studied. However, there was a significant difference in biofilm formation between the saliva-treated and non-saliva-treated implants. Saliva contamination enhanced S. mutans, S. aureus, and E. faecalis adhesion in all material types studied. S. aureus was found to be the most adherent strain in the saliva-treated group, whereas E. coli was the most adherent strain in the non-saliva-treated group. In conclusion, CAD-CAM tooling techniques have little effect on bacterial adhesion. Saliva coating enhances the biofilm formation; therefore, saliva contamination of the implant must be minimized during implant placement. Further extensive studies are needed to evaluate the effects of surface treatments of the titanium implant on soft tissue response and to prevent the factors causing implant infection and failure.

CPC-containing oral rinses inactivate SARS-CoV-2 variants and are active in the presence of human saliva

Introduction. The importance of human saliva in aerosol-based transmission of SARS-CoV-2 is now widely recognized. However, little is known about the efficacy of virucidal mouthwash formulations against emergent SARS-CoV-2 variants of concern and in the presence of saliva.

Hypothesis. Mouthwashes containing virucidal actives will have similar inactivation effects against multiple SARS-CoV-2 variants of concern and will retain efficacy in the presence of human saliva.

Aim. To examine in vitro efficacy of mouthwash formulations to inactivate SARS-CoV-2 variants.

Methodology. Inactivation of SARS-CoV-2 variants by mouthwash formulations in the presence or absence of human saliva was assayed using ASTM International Standard E1052-20 methodology.

Results. Appropriately formulated mouthwashes containing 0.07 % cetylpyridinium chloride but not 0.2 % chlorhexidine completely inactivated SARS-CoV-2 (USA-WA1/2020, Alpha, Beta, Gamma, Delta) up to the limit of detection in suspension assays. Tests using USA-WA1/2020 indicates that efficacy is maintained in the presence of human saliva.

Conclusions. Together these data suggest cetylpyridinium chloride-based mouthwashes are effective at inactivating SARS-CoV-2 variants. This indicates potential to reduce viral load in the oral cavity and mitigate transmission via salivary aerosols.

EDX-analysis of fluoride precipitation on human enamel

One mechanism of action for the anticaries effect of topical fluoridation is through precipitation of CaF₂. In this in vitro study energy-dispersive x-ray spectroscopy (EDX) is used as a semiquantitative method to detect enamel fluoride-precipitation under the influence of acidic and neutral pH-value and absence or presence of a salivary pellicle. Crowns of 30 human caries-free third molars were quartered into four specimens and the enamel surface ground flat and polished. Two specimens each were stored in human saliva (120 minutes pellicle formation). Teeth were randomly allocated into 6 treatment groups: NaF_a (experimental acidic sodium fluoride; 12500 ppmF⁻, pH 4.75); NaF_n (experimental neutral sodium fluoride; 12500 ppmF⁻, pH 7.0); GB_a (acidic gel base; 0 ppmF⁻, pH 4.75); GB_n (neutral gel base; 0 ppmF⁻, pH 7.0); AmF-NaF_a (experimental acidic amine/sodium fluoride; 12500 ppmF⁻, pH 4.75); EG_a (acidic amine/sodium fluoride; Elmex Geleé, CP-GABA GmbH; 12500 ppmF⁻, pH 4.75). Each gel was applied for 60 seconds to one specimen with and one specimen without pellicle. Two specimens served as controls (no gel, without/with pellicle). Atomic percent (At%) of O, F, Na, Mg, P, Ca was measured by EDX. ∆At% and Ca/P-ratios were calculated. EDX could semi-quantify superficial enamel fluoride-precipitation. Only specimens treated with acidic fluoride gels showed fluoride-precipitation, a salivary pellicle tended to decrease At%F.

Evaluation of Restorative Materials Containing Preventive Additives in a Secondary Caries Model in vitro

The incorporation of antibacterial agents into dental restorative materials is a promising strategy for secondary caries prevention. Previously, Carolacton affected Streptococcus mutans biofilm formation on composite materials in vitro. The present study evaluated secondary caries formation adjacent to Carolacton-containing composites and conventional restorative materials using an artificial biofilm model. Standardized cavities were prepared in bovine dentin-enamel samples (n = 175) and restored with various dental materials (Tetric EvoCeram [T], GrandioSo composite without [G] and with Carolacton [GC], Grandio Flow without [F] and with Carolacton [FC], GrandioSo containing sodium fluoride [GNaF], and Ketac Fil [K]). After artificial aging, S. mutans was grown on the samples for 7 days. The investigation of gap sizes and secondary caries formation was performed using confocal laser scanning microscopy and transversal microradiography. Median gap size in enamel was 9.4 µm (interquartile range 7.9–12.7). Compared to all other groups significant differences in gap sizes could be observed for Ketac Fil (p < 0.001; Mann-Whitney test). Only GrandioSo composite containing 30% sodium fluoride and Ketac Fil showed significantly smaller lesion areas in enamel (p < 0.001; Mann-Whitney test) than all other groups which was confirmed by the mineral loss data (p < 0.001; Mann-Whitney test). Based on the present in vitro results, it seems that Carolacton-containing composite in the current formulation within the shown simplified monoculture biofilm model is not able to prevent caries formation compared to fluoride-releasing restorative materials.

"The Smartphone's Guide to the Galaxy": In Situ Analysis in Space

A human mission to Mars can be viewed as the apex of human technological achievement. However, to make this dream a reality several obstacles need to be overcome. One is devising practical ways to safeguard the crew health during the mission through the development of easy operable and compact sensors. Lately, several smartphone-based sensing devices (SBDs) with the purpose to enable the immediate sensitive detection of chemicals, proteins or pathogens in remote settings have emerged. In this critical review, the potential to piggyback these systems for in situ analysis in space has been investigated on application of a systematic keyword search whereby the most relevant articles were examined comprehensively and existing SBDs were divided into 4 relevant groups for the monitoring of crew health during space missions. Recently developed recognition elements (REs), which could offer the enhanced ability to tolerate those harsh conditions in space, have been reviewed with recommendations offered. In addition, the potential use of cell free synthetic biology to obtain long-term shelf-stable reagents was reviewed. Finally, a synopsis of the possibilities of combining novel SBD, RE and nanomaterials to create a compact sensor-platform ensuring adequate crew health monitoring has been provided.

Phenalen-1-one-Mediated Antimicrobial Photodynamic Therapy: Antimicrobial Efficacy in a Periodontal Biofilm Model and Flow Cytometric Evaluation of Cytoplasmic Membrane Damage

In light of increasing resistance toward conventional antibiotics and antiseptics, antimicrobial photodynamic therapy (aPDT) may be a valuable alternative, especially for use in dentistry. In this regard, photosensitizers (PS) based on a phenalen-1-one structure seem to be especially favorable due to their high singlet oxygen quantum yield. However, the actual target structures of phenalen-1-one-mediated aPDT are still unclear. The aim of the present study was to investigate the antimicrobial efficacy of aPDT mediated by phenalen-1-one derivatives SAPYR and SAGUA for inactivation of a polymicrobial biofilm consisting of three putative periodontal pathogens in vitro and to get first insights in the mechanism of action of phenalen-1-one-mediated aPDT by assessing damage of cytoplasmic membranes. aPDT with SAPYR exhibited identical antimicrobial efficacy as compared to chlorhexidine (CHX) [4.4-6.1 log₁₀ reduction of colony forming units (CFUs) depending on bacterial species] while aPDT with SAGUA was less effective (2.0-2.8 log₁₀). Flow cytometric analysis combined with propidium iodide (PI) staining revealed no damage of cytoplasmic membranes after aPDT with both phenalen-1-one derivatives, which was confirmed by spectroscopic measurements for release of nucleic acids after treatment. Spectrophotometric PS-uptake measurements showed no uptake of SAPYR by bacterial cells. Despite the inability to pinpoint the actual target of phenalen-1-one-mediated aPDT, this study shows the high antimicrobial potential of phenalen-1-on mediated aPDT (especially when using SAPYR) and represents a first step for getting insights in the mechanism and damage patterns of aPDT with this class of PS.

Phenalen-1-One-Mediated Antimicrobial Photodynamic Therapy and Chlorhexidine Applied to a Novel Caries Biofilm Model

Antimicrobial photodynamic therapy (aPDT) may be useful as a supportive antimicrobial measure for caries-active subjects. In this study, the antimicrobial efficacy of aPDT with a phenalen-1-one photosensitizer was evaluated in a novel in vitro biofilm model comprising Actinomyces naeslundii, Actinomyces odontolyticus, and Streptococcus mutans and was compared to chlorhexidine. The proposed biofilm model allows high-throughput screening for antimicrobial efficacy while exhibiting a differentiated response to different antimicrobial approaches. While chlorhexidine 0.2% showed a reduction of ≈4 log10 for all species, aPDT led to a more pronounced reduction of S. mutans (2.8 log10) than of Actinomyces spp. (1.2 or 1.3 log10). A similar effect was also observed in monospecies biofilms. Therefore, aPDT may be more effective against S. mutans than against Actinomyces spp. when in biofilms, and this antimicrobial approach merits further investigations.

Natural saliva as an adjuvant in a secondary caries model based on Streptococcus mutans

OBJECTIVE

Two factors for secondary caries formation were evaluated using an artificial biofilm model, saliva as additive in culture medium and bonding procedures of composite materials for artificial gap creation.

DESIGN

Standardized cavities were prepared in bovine tooth samples (n = 44), treated with two different bonding pretreatments, restored and after artificial ageing incubated with Streptococcus mutans in a Mueller-Hinton-Broth-Sugar medium with or without human saliva for seven days. Secondary caries formation was analyzed using confocal laser scanning microscopy and transversal microradiography.

RESULTS

Lesions were significantly pronounced in groups using saliva, but were not influenced by the bonding pretreatments.

CONCLUSIONS

The results indicate that the addition of saliva, but not the type of bonding procedure influences the outcome in the present biofilm-based secondary caries model.

In vitro effects of hydroxyapatite containing toothpastes on dentin permeability after multiple applications and ageing

This in vitro study evaluated the effect of toothpastes with different active ingredients on dentin permeability using an extended protocol including multiple applications and several thermal ageing cycles in the presence or absence of human saliva. The Null hypothesis was that dentin permeability of a hydroxyapatite containing toothpaste (BR), a potassium nitrate (SP) and an arginine and calcium carbonate (EH) containing toothpaste were similar. Dentin permeability was measured as hydraulic conductance using a commercially available capillary flow system (Flodec, Geneva) and results were expressed as % relative to matching controls. Without saliva, the ranking (best first) of dentin permeability was BR(61%) < SP(87%) < EH(118%), with saliva EH(63%) < SP(72%) < BR(88%). Saliva increased or decreased permeability dependent upon the test material. BR reduced dentin permeability significantly more in absence of saliva, with saliva EH was superior to BR. Repeated material application decreased and thermal ageing increased dentin permeability. The different tooth pastes reduced permeability differently, the best being BR without saliva, the least EH without saliva. The newly introduced test conditions (ageing, saliva, multiple applications) influenced single results significantly, and as they better simulate the in vivo situation they should be considered to be included in further in vitro permeability testing of desensitizing preparations.

Nanopore DNA Sequencing and Genome Assembly on the International Space Station

We evaluated the performance of the MinION DNA sequencer in-flight on the International Space Station (ISS), and benchmarked its performance off-Earth against the MinION, Illumina MiSeq, and PacBio RS II sequencing platforms in terrestrial laboratories. Samples contained equimolar mixtures of genomic DNA from lambda bacteriophage, Escherichia coli (strain K12, MG1655) and Mus musculus (female BALB/c mouse). Nine sequencing runs were performed aboard the ISS over a 6-month period, yielding a total of 276,882 reads with no apparent decrease in performance over time. From sequence data collected aboard the ISS, we constructed directed assemblies of the ~4.6 Mb E. coli genome, ~48.5 kb lambda genome, and a representative M. musculus sequence (the ~16.3 kb mitochondrial genome), at 100%, 100%, and 96.7% consensus pairwise identity, respectively; de novo assembly of the E. coli genome from raw reads yielded a single contig comprising 99.9% of the genome at 98.6% consensus pairwise identity. Simulated real-time analyses of in-flight sequence data using an automated bioinformatic pipeline and laptop-based genomic assembly demonstrated the feasibility of sequencing analysis and microbial identification aboard the ISS. These findings illustrate the potential for sequencing applications including disease diagnosis, environmental monitoring, and elucidating the molecular basis for how organisms respond to spaceflight.

Identification of Factors Associated with Biofilm Formation Ability in the Clinical Isolates of Helicobacter pylori

Background

A few reports confirm the ability of Helicobacter pylori to form biofilm. However, conclusive data do not exist concerning the factors that favor this ability.

Objectives

Evaluation of the factors associated with the biofilm formation ability of H. pylori including bacterial, physical and chemical, and environmental factors was the research’s aim.

Materials and Methods

H. pylori isolates from gastric biopsy specimens of patients infected chronically were screened for biofilm formation ability. Association of bacterial properties such as motility, auto-aggregation, cell hydrophobicity, and extracellular polymeric substances (EPS) with in vitro biofilm formation ability of H. pylori was evaluated. The effects of environmental factors such as growth-medium, temperature, oxygen-tension, pH, β-cyclodextrin, gastric secreted mucins, and sub-inhibitory concentration of amoxicillin were also evaluated.

Results

Ability of clinical H. pylori isolates to form biofilm in was quantitatively compared. The coccoid shape H. pylori cells were observed by scanning electron microscopy, the images were illustrative of the attachment of cells to form microcolony. The levels of hydrophobicity, motility and auto aggregation of two isolates with highest and lowest biofilm formation ability were the same. However, the signifi cant role of mucins (P < 0.05) in elevating the biofilm formation was observed. Other factors influencing biofilm formation were: pH, atmosphere and sub-MIC of antibiotics.

Conclusion

Mucins have a signifi cant role in elevating the biofilm formation, also pH, atmosphere and sub-MIC of antibiotics influence biofilm formation.

Alternative sweeteners influence the biomass of oral biofilm

OBJECTIVE

Compact-structured oral biofilm accumulates acids that upon prolonged exposure to tooth surface, causes demineralisation of enamel. This study aimed to assess the effect of alternative sweeteners Equal Stevia^®, Tropicana Slim^®, Pal Sweet^® and xylitol on the matrix-forming activity of plaque biofilm at both the early and established stages of formation.

METHODS

Saliva-coated glass beads (sGB) were used as substratum for the adhesion of a mixed-bacterial suspension of Streptococcus mutans, Streptococcus sanguinis and Streptococcus mitis. Biofilms formed on sGB at 3h and 24h represented the early and established-plaque models. The biofilms were exposed to three doses of the sweeteners (10%), introduced at three intervals to simulate the exposure of dental plaque to sugar during three consecutive food intakes. The treated sGB were (i) examined under the SEM and (ii) collected for turbidity reading. The absorbance indicated the amount of plaque mass produced. Analysis was performed comparative to sucrose as control.

RESULTS

Higher rate of bacterial adherence was determined during the early compared to established phases of formation. Comparative to the sweeteners, sucrose showed a 40% increase in bacterial adherence and produced 70% more plaque-mass. Bacterial counts and SEM micrographs exhibited absence of matrix in all the sweetener-treated biofilms at the early phase of formation. At the established phase, presence of matrix was detected but at significantly lower degree compared to sucrose (p<0.05).

CONCLUSION

Alternatives sweeteners promoted the formation of oral biofilm with lighter mass and lower bacterial adherence. Hence, suggesting alternative sweeteners as potential antiplaque agents.

Effect of Different Obturation Materials on Residual Antimicrobial Activity of 2% Chlorhexidine in Dentin at Different Time Intervals: An Ex Vivo Study

OBJECTIVES

The aim of this study was to evaluate the effect of gutta percha/AH26 and Resilon/RealSeal SE on residual antimicrobial activity of chlorhexidine (CHX) in human root dentin and suggest the best filling material when CHX is used as final irrigant.

MATERIALS AND METHODS

One-hundred and forty-four single-rooted human teeth were selected for this study. Canals were instrumented to the apical size #35. Smear layer was removed using 5.25% NaOCl and 17% EDTA and then 108 teeth were irrigated with 2% CHX and randomly divided into three groups of gutta percha/AH26, Resilon/RealSeal SE and positive controls. Each group was divided into three subgroups for different time intervals (one, three and six weeks). Thirty-six teeth, as negative controls, were irrigated with saline and obturated with gutta percha/AH26 and Resilon/RealSeal SE. Dentin powder was prepared at the afore-mentioned intervals. After exposure to Enterococcus faecalis for 24 hours, colony forming units (CFUs) were counted and residual antimicrobial activity was calculated. The data were analyzed using the Kruskal Wallis test and one-way ANOVA. The significance level was set at P<0.05.

RESULTS

The antimicrobial activity of CHX gradually decreased in a time-dependent manner but it maintained over 95% of its antimicrobial activity after six weeks. Moreover, Resilon/RealSeal SE significantly decreased the antimicrobial activity of CHX in comparison with gutta-percha/AH26 (P<0.05).

CONCLUSION

After a final irrigation with CHX, gutta-percha/AH26 is a better choice for root canal obturation.

The scientific exploration of saliva in the post-proteomic era: from database back to basic function

The proteome of human saliva can be considered as being essentially completed. Diagnostic markers for a number of diseases have been identified among salivary proteins and peptides, taking advantage of saliva as an easy-to-obtain biological fluid. Yet, the majority of disease markers identified so far are serum components and not intrinsic proteins produced by the salivary glands. Furthermore, despite the fact that saliva is essential for protecting the oral integuments and dentition, little progress has been made in finding risk predictors in the salivary proteome for dental caries or periodontal disease. Since salivary proteins, and in particular the attached glycans, play an important role in interactions with the microbial world, the salivary glycoproteome and other post-translational modifications of salivary proteins need to be studied. Risk markers for microbial diseases, including dental caries, are likely to be discovered among the highly glycosylated major protein species in saliva. This review will attempt to raise new ideas and also point to under-researched areas that may hold promise for future applicability in oral diagnostics and prediction of oral disease.

The impact of dendrimer-grafted modifications to model silicon surfaces on protein adsorption and bacterial adhesion

In the oral cavity, omnipresent salivary protein films (pellicle) mediate bacterial adhesion and biofilm formation on natural tissues as well as on artificial implant surfaces, which may cause serious infectious diseases like periimplantitis. The purpose of this in vitro study was to investigate the adsorption/desorption behaviour of human saliva on model surfaces grafted with polyamidoamine (PAMAM) dendrimer molecules compared to self-assembled monolayers (SAMs) exhibiting the same terminal functions (-NH(2), -COOH) by two complementary analytical methods. Furthermore, the role of saliva conditioning of PAMAM and analogous SAM modifications on the adhesion of Streptococcus gordonii DL1, an early oral colonizer, was investigated. In contrast to SAMs, PAMAM-grafted surfaces showed reduced streptococcal adherence in the absence of pre-adsorbed saliva similar to the level obtained for poly(ethylene glycol) (PEG) coatings. Moreover, coatings of PAMAM-NH(2) maintained their bacteria-repellent behaviour even after saliva-conditioning. As a general outcome, it was found that lower amounts of protein adsorbed on PAMAM coatings than on analogous SAMs. Since this study demonstrates that covalently bound PAMAM dendrimers can modulate the oral bacterial response, this approach has significant potential for the development of anti-adhesive biomaterial surfaces that are conditioned with proteinaceous films.