Improvement of the redox balance increases L-valine production by Corynebacterium glutamicum under oxygen deprivation conditions

Metabolic Engineering of Corynebacterium glutamicum for the High-Level Production of l-Valine under Aerobic Conditions

l-Valine, an essential amino acid, serves as a valuable compound in various industries. However, engineering strains with both high yield and purity are yet to be delivered for microbial l-valine production. We engineered a Corynebacterium glutamicum strain capable of highly efficient production of l-valine. We initially introduced an acetohydroxy acid synthase mutant from an industrial l-valine producer and optimized a cofactor-balanced pathway, followed by the activation of the nonphosphoenolpyruvate-dependent carbohydrate phosphotransferase system and the introduction of an exogenous Entner-Doudoroff pathway. Subsequently, we weakened anaplerotic pathways, and attenuated the tricarboxylic acid cycle via start codon substitution in icd, encoding isocitrate dehydrogenase. Finally, to balance bacterial growth and l-valine production, an l-valine biosensor-dependent genetic circuit was established to dynamically repress citrate synthase expression. The engineered strain Val19 produced 103 g/L of l-valine with a high yield of 0.35 g/g glucose and a productivity of 2.67 g/L/h. This represents the highest reported l-valine production in C. glutamicum via direct fermentation and exhibits potential for its industrial-scale production, leveraging the advantages of C. glutamicum over other microbes.

Recent Advances in Metabolic Engineering for the Biosynthesis of Phosphoenol Pyruvate-Oxaloacetate-Pyruvate-Derived Amino Acids

The phosphoenol pyruvate-oxaloacetate-pyruvate-derived amino acids (POP-AAs) comprise native intermediates in cellular metabolism, within which the phosphoenol pyruvate-oxaloacetate-pyruvate (POP) node is the switch point among the major metabolic pathways existing in most living organisms. POP-AAs have widespread applications in the nutrition, food, and pharmaceutical industries. These amino acids have been predominantly produced in Escherichia coli and Corynebacterium glutamicum through microbial fermentation. With the rapid increase in market requirements, along with the global food shortage situation, the industrial production capacity of these two bacteria has encountered two bottlenecks: low product conversion efficiency and high cost of raw materials. Aiming to push forward the update and upgrade of engineered strains with higher yield and productivity, this paper presents a comprehensive summarization of the fundamental strategy of metabolic engineering techniques around phosphoenol pyruvate-oxaloacetate-pyruvate node for POP-AA production, including L-tryptophan, L-tyrosine, L-phenylalanine, L-valine, L-lysine, L-threonine, and L-isoleucine. Novel heterologous routes and regulation methods regarding the carbon flux redistribution in the POP node and the formation of amino acids should be taken into consideration to improve POP-AA production to approach maximum theoretical values. Furthermore, an outlook for future strategies of low-cost feedstock and energy utilization for developing amino acid overproducers is proposed.

Microbial production of branched chain amino acids: Advances and perspectives

Branched-chain amino acids (BCAAs) such as L-valine, L-leucine, and L-isoleucine are widely used in food and feed. To comply with sustainable development goals, commercial production of BCAAs has been completely replaced with microbial fermentation. However, the efficient production of BCAAs by microorganisms remains a serious challenge due to their staggered metabolic networks and cell growth. To overcome these difficulties, systemic metabolic engineering has emerged as an effective and feasible strategy for the biosynthesis of BCAA. This review firstly summarizes the research advances in the microbial synthesis of BCAAs and representative engineering strategies. Second, systematic methods, such as high-throughput screening, adaptive laboratory evolution, and omics analysis, can be used to analyses the synthesis of BCAAs at the whole-cell level and further improve the titer of target chemicals. Finally, new tools and engineering strategies that may increase the production output and development direction of the microbial production of BCAAs are discussed.

Efficient L-valine production using systematically metabolic engineered Klebsiella oxytoca

L-Valine, a branched-chain amino acid with diversified applications, is biosynthesized with α-acetolactate as the key precursor. In this study, the metabolic flux in Klebsiella oxytoca PDL-K5, a Risk Group 1 organism producing 2,3-butanediol as the major fermentation product, was rearranged to L-valine production by introducing exogenous L-valine biosynthesis pathway and blocking endogenous 2,3-butanediol generation at the metabolic branch point α-acetolactate. After further enhancing L-valine efflux, strengthening pyruvate polymerization and selecting of key enzymes for L-valine synthesis, a plasmid-free K. oxytoca strain VKO-9 was obtained. Fed-batch fermentation with K. oxytoca VKO-9 in a 7.5 L fermenter generated 122 g/L L-valine with a yield of 0.587 g/g in 56 h. In addition, repeated fed-batch fermentation was conducted to prevent precipitation of L-valine due to oversaturation. The average concentration, yield, and productivity of produced L-valine in three cycles of repeated fed-batch fermentation were 81.3 g/L, 0.599 g/g, and 3.39 g/L/h, respectively.

Construction of a plasmid-free L-leucine overproducing Escherichia coli strain through reprogramming of the metabolic flux

BACKGROUND

L-Leucine is a high-value amino acid with promising applications in the medicine and feed industries. However, the complex metabolic network and intracellular redox imbalance in fermentative microbes limit their efficient biosynthesis of L-leucine.

RESULTS

In this study, we applied rational metabolic engineering and a dynamic regulation strategy to construct a plasmid-free, non-auxotrophic Escherichia coli strain that overproduces L-leucine. First, the L-leucine biosynthesis pathway was strengthened through multi-step rational metabolic engineering. Then, a cooperative cofactor utilization strategy was designed to ensure redox balance for L-leucine production. Finally, to further improve the L-leucine yield, a toggle switch for dynamically controlling sucAB expression was applied to accurately regulate the tricarboxylic acid cycle and the carbon flux toward L-leucine biosynthesis. Strain LEU27 produced up to 55 g/L of L-leucine, with a yield of 0.23 g/g glucose.

CONCLUSIONS

The combination of strategies can be applied to the development of microbial platforms that produce L-leucine and its derivatives.

A binuclear Cu(I)-phosphine complex as a specific HSA site I binder: synthesis, X-ray structure determination, and a comprehensive HSA interaction analysis

In this research, we present a method for synthesis and a detailed description of geometry characterization of a novel binuclear Cu(I) phosphine complex, along with analysis of its interaction with HSA using spectroscopic and simulation methods. The Cu atoms are coordinated in a tetrahedral geometry, which results in coordination by two nitrogen atoms from the N,N'-(ethane-1,2-diyl)bis(1-(pyridin-2-yl)methanimine ligand (L), a chloride, and a PPh3. The complex binding constant to HSA in a biochemical environment was determined to be ∼106, which is indicative of a strong interaction. The fluorescence of HSA is significantly quenched by binding to the complex via a static mechanism, whereas the microenvironment of the tryptophan residue remains unchanged. A spontaneous binding process was indicated by a negative value for ΔG. Thermodynamic signatures reflect the dominance of hydrophobic forces during the interaction. The site marker competitive experiment combined with docking simulation analysis revealed the closeness position of the complex binding site to warfarin location in specific ligand site I of HSA. The information generated in the present study would be valuable to understand the interaction mechanistic and pharmacological behavior of Cu(I) complexes.Communicated by Ramaswamy H. Sarma.

High-level and -yield production of L-leucine in engineered Escherichia coli by multistep metabolic engineering

L-leucine is an essential amino acid widely used in food and pharmaceutical industries. However, the relatively low production efficiency limits its large-scale application. In this study, we rationally developed an efficient L-leucine-producing Escherichia coli strain. Initially, the L-leucine synthesis pathway was enhanced by overexpressing feedback-resistant 2-isopropylmalate synthase and acetohydroxy acid synthase both derived from Corynebacterium glutamicum, along with two other native enzymes. Next, the pyruvate and acetyl-CoA pools were enriched by deleting competitive pathways, employing the nonoxidative glycolysis pathway, and dynamically modulating the citrate synthase activity, which significantly promoted the L-leucine production and yield to 40.69 g/L and 0.30 g/g glucose, respectively. Then, the redox flux was improved by substituting the native NADPH-dependent acetohydroxy acid isomeroreductase, branched chain amino acid transaminase, and glutamate dehydrogenase with their NADH-dependent equivalents. Finally, L-leucine efflux was accelerated by precise overexpression of the exporter and deletion of the transporter. Under fed-batch conditions, the final strain LXH-21 produced 63.29 g/L of L-leucine, with a yield and productivity of 0.37 g/g glucose and 2.64 g/(L h), respectively. To our knowledge, this study achieved the highest production efficiency of L-leucine to date. The strategies presented here will be useful for engineering E. coli strains for producing L-leucine and related products on an industrial scale.

De novo tryptophanase-based indole production by metabolically engineered Corynebacterium glutamicum

Indole has an increasing interest in the flavor and fragrance industry. It is used in dairy products, tea drinks, and fine fragrances due to its distinct floral odor typical of jasmine blossoms. The current production of indole based on isolation from coal tar is non-sustainable and its isolation from plants is often unprofitable due to low yields. To offer an alternative to the conventional production, biosynthesis of indole has been studied recently. A glucose-based indole production was achieved by employing the Corynebacterium glutamicum tryptophan synthase α-subunit (TrpA) or indole-3-glycerol phosphate lyase (IGL) from wheat Triticum aestivum in a genetically-engineered C. glutamicum strain. In addition, a highly efficient bioconversion process using C. glutamicum heterologously expressing tryptophanase gene (tnaA) from Providencia rettgeri as a biocatalyst was developed. In this work, de novo indole production from glucose was enabled by expressing the P. rettgeri tnaA in a tryptophan-producing C. glutamicum strain. By metabolic engineering of a C. glutamicum shikimate accumulating base strain, tryptophan production of 2.14 ± 0.02 g L^-1 was achieved. Introduction of the tryptophanase form P. rettgeri enabled indole production, but to low titers, which could be improved by sequestering indole into the water-immiscible solvent tributyrin during fermentation and a titer of 1.38 ± 0.04 g L^-1 was achieved. The process was accelerated by decoupling growth from production increasing the volumetric productivity about 4-fold to 0.08 g L^-1 h^-1. KEY POINTS: • Efficient de novo indole production via tryptophanases from glucose • Increased indole titers by product sequestration and improved precursor supply • Decoupling growth from production accelerated indole production.

Rational metabolic engineering of Corynebacterium glutamicum to create a producer of L-valine

L-Valine is one of the nine amino acids that cannot be synthesized de novo by higher organisms and must come from food. This amino acid not only serves as a building block for proteins, but also regulates protein and energy metabolism and participates in neurotransmission. L-Valine is used in the food and pharmaceutical industries, medicine and cosmetics, but primarily as an animal feed additive. Adding L-valine to feed, alone or mixed with other essential amino acids, allows for feeds with lower crude protein content, increases the quality and quantity of pig meat and broiler chicken meat, as well as improves reproductive functions of farm animals. Despite the fact that the market for L-valine is constantly growing, this amino acid is not yet produced in our country. In modern conditions, the creation of strains-producers and organization of L-valine production are especially relevant for Russia. One of the basic microorganisms most commonly used for the creation of amino acid producers, along with Escherichia coli, is the soil bacterium Corynebacterium glutamicum. This review is devoted to the analysis of the main strategies for the development of L- valine producers based on C. glutamicum. Various aspects of L-valine biosynthesis in C. glutamicum are reviewed: process biochemistry, stoichiometry and regulation, enzymes and their corresponding genes, export and import systems, and the relationship of L-valine biosynthesis with central cell metabolism. Key genetic elements for the creation of C. glutamicum-based strains-producers are identified. The use of metabolic engineering to enhance L-valine biosynthesis reactions and to reduce the formation of byproducts is described. The prospects for improving strains in terms of their productivity and technological characteristics are shown. The information presented in the review can be used in the production of producers of other amino acids with a branched side chain, namely L-leucine and L-isoleucine, as well as D-pantothenate.

Stratifications and foliations in phase portraits of gene network models

Periodic processes of gene network functioning are described with good precision by periodic trajectories (limit cycles) of multidimensional systems of kinetic-type differential equations. In the literature, such systems are often called dynamical, they are composed according to schemes of positive and negative feedback between components of these networks. The variables in these equations describe concentrations of these components as functions of time. In the preparation of numerical experiments with such mathematical models, it is useful to start with studies of qualitative behavior of ensembles of trajectories of the corresponding dynamical systems, in particular, to estimate the highest likelihood domain of the initial data, to solve inverse problems of parameter identification, to list the equilibrium points and their characteristics, to localize cycles in the phase portraits, to construct stratification of the phase portraits to subdomains with different qualities of trajectory behavior, etc. Such an à priori geometric analysis of the dynamical systems is quite analogous to the basic section "Investigation of functions and plot of their graphs" of Calculus, where the methods of qualitative studies of shapes of curves determined by equations are exposed. In the present paper, we construct ensembles of trajectories in phase portraits of some dynamical systems. These ensembles are 2-dimensional surfaces invariant with respect to shifts along the trajectories. This is analogous to classical construction in analytic mechanics, i. e. the level surfaces of motion integrals (energy, kinetic moment, etc.). Such surfaces compose foliations in phase portraits of dynamical systems of Hamiltonian mechanics. In contrast with this classical mechanical case, the foliations considered in this paper have singularities: all their leaves have a non-empty intersection, they contain limit cycles on their boundaries. Description of the phase portraits of these systems at the level of their stratifications, and that of ensembles of trajectories allows one to construct more realistic gene network models on the basis of methods of statistical physics and the theory of stochastic differential equations.

Metabolic engineering of Corynebacterium glutamicum for producing branched chain amino acids

Background

Branched chain amino acids (BCAAs) are widely applied in the food, pharmaceutical, and animal feed industries. Traditional chemical synthetic and enzymatic BCAAs production in vitro has been hampered by expensive raw materials, harsh reaction conditions, and environmental pollution. Microbial metabolic engineering has attracted considerable attention as an alternative method for BCAAs biosynthesis because it is environmentally friendly and delivers high yield.

Main text

Corynebacterium glutamicum (C. glutamicum) possesses clear genetic background and mature gene manipulation toolbox, and has been utilized as industrial host for producing BCAAs. Acetohydroxy acid synthase (AHAS) is a crucial enzyme in the BCAAs biosynthetic pathway of C. glutamicum, but feedback inhibition is a disadvantage. We therefore reviewed AHAS modifications that relieve feedback inhibition and then investigated the importance of AHAS modifications in regulating production ratios of three BCAAs. We have comprehensively summarized and discussed metabolic engineering strategies to promote BCAAs synthesis in C. glutamicum and offer solutions to the barriers associated with BCAAs biosynthesis. We also considered the future applications of strains that could produce abundant amounts of BCAAs.

Conclusions

Branched chain amino acids have been synthesized by engineering the metabolism of C. glutamicum. Future investigations should focus on the feedback inhibition and/or transcription attenuation mechanisms of crucial enzymes. Enzymes with substrate specificity should be developed and applied to the production of individual BCAAs. The strategies used to construct strains producing BCAAs provide guidance for the biosynthesis of other high value-added compounds.

A Myo-Inositol-Inducible Expression System for Corynebacterium glutamicum and Its Application

Corynebacterium glutamicum is one of the important industrial microorganisms for production of amino acids and other value-added compounds. Most expression vectors used in C. glutamicum are based on inducible promoter (P_tac or P_trc) activated by isopropyl-β-D-thiogalactopyranoside (IPTG). However, these vectors seem unsuitable for large-scale industrial production due to the high cost and toxicity of IPTG. Myo-inositol is an ideal inducer because of its non-toxicity and lower price. In this study, a myo-inositol-inducible expression vector pMI-4, derived from the expression vector pXMJ19, was constructed. Besides the original chloramphenicol resistance gene cat, multiple cloning sites, and rrnB terminator, the pMI-4 (6,643 bp) contains the iolR^q cassette and the myo-inositol-inducible promoter P_iolT1. The pMI-4 could stably replicate in the C. glutamicum host. Meanwhile, the non-myo-inositol degradation host strain C. glutamicumΔiolGΔoxiCΔoxiDΔoxiE for maintaining the pMI-4 was developed. Overexpression of hemA^M and hemL using pMI-4 resulted in a significant accumulation of 5-aminolevulinic acid, indicating its potential application in metabolic engineering and industrial fermentation.

Rossmann-toolbox: a deep learning-based protocol for the prediction and design of cofactor specificity in Rossmann fold proteins

The Rossmann fold enzymes are involved in essential biochemical pathways such as nucleotide and amino acid metabolism. Their functioning relies on interaction with cofactors, small nucleoside-based compounds specifically recognized by a conserved βαβ motif shared by all Rossmann fold proteins. While Rossmann methyltransferases recognize only a single cofactor type, the S-adenosylmethionine, the oxidoreductases, depending on the family, bind nicotinamide (nicotinamide adenine dinucleotide, nicotinamide adenine dinucleotide phosphate) or flavin-based (flavin adenine dinucleotide) cofactors. In this study, we showed that despite its short length, the βαβ motif unambiguously defines the specificity towards the cofactor. Following this observation, we trained two complementary deep learning models for the prediction of the cofactor specificity based on the sequence and structural features of the βαβ motif. A benchmark on two independent test sets, one containing βαβ motifs bearing no resemblance to those of the training set, and the other comprising 38 experimentally confirmed cases of rational design of the cofactor specificity, revealed the nearly perfect performance of the two methods. The Rossmann-toolbox protocols can be accessed via the webserver at https://lbs.cent.uw.edu.pl/rossmann-toolbox and are available as a Python package at https://github.com/labstructbioinf/rossmann-toolbox.

Engineering of microbial cells for L-valine production: challenges and opportunities

L-valine is an essential amino acid that has wide and expanding applications with a suspected growing market demand. Its applicability ranges from animal feed additive, ingredient in cosmetic and special nutrients in pharmaceutical and agriculture fields. Currently, fermentation with the aid of model organisms, is a major method for the production of L-valine. However, achieving the optimal production has often been limited because of the metabolic imbalance in recombinant strains. In this review, the constrains in L-valine biosynthesis are discussed first. Then, we summarize the current advances in engineering of microbial cell factories that have been developed to address and overcome major challenges in the L-valine production process. Future prospects for enhancing the current L-valine production strategies are also discussed.

L-valine production in Corynebacterium glutamicum based on systematic metabolic engineering: progress and prospects

L-valine is an essential branched-chain amino acid that cannot be synthesized by the human body and has a wide range of applications in food, medicine and feed. Market demand has stimulated people's interest in the industrial production of L-valine. At present, the mutagenized or engineered Corynebacterium glutamicum is an effective microbial cell factory for producing L-valine. Because the biosynthetic pathway and metabolic network of L-valine are intricate and strictly regulated by a variety of key enzymes and genes, highly targeted metabolic engineering can no longer meet the demand for efficient biosynthesis of L-valine. In recent years, the development of omics technology has promoted the upgrading of traditional metabolic engineering to systematic metabolic engineering. This whole-cell-scale transformation strategy has become a productive method for developing L-valine producing strains. This review provides an overview of the biosynthesis and regulation mechanism of L-valine, and summarizes the current metabolic engineering techniques and strategies for constructing L-valine high-producing strains. Finally, the opinion of constructing a cell factory for efficiently biosynthesizing L-valine was proposed.

Physiological characteristics of Corynebacterium glutamicum as a cell factory under anaerobic conditions

Corynebacterium glutamicum, a gram-positive and facultative anaerobic bacterium, is widely used for the industrial production of amino acids, such as L-glutamate and L-lysine. C. glutamicum grows and produces amino acids under aerobic conditions. When restricted under anaerobic conditions, it produces organic acids, such as L-lactate and succinate, through metabolic shift. With the increasing threat of global warming, these organic acids have drawn considerable attention as bio-based plastic monomers. In addition to the organic acids, the anaerobic bioprocess is also used to produce other value-added compounds, including isobutanol, ethanol, 3-methyl-1-butanol, 2,3-butanediol, L-alanine, and L-valine. Therefore, C. glutamicum is now a versatile cell factory for producing a wide variety of useful chemicals under both aerobic and anaerobic conditions. The growth and metabolism of the bacterium depend on the oxygen levels, which modulate the rearrangement of the carbon flux by reprogramming gene expression patterns and intracellular redox states. Anaerobic cell growth and L-lysine production as well as aerobic succinate production have been demonstrated by engineering the metabolic pathways or supplying a terminal electron acceptor instead of oxygen. In this review, we discuss the physiological and metabolic changes in C. glutamicum associated with its application as a cell factory under different oxygen states. Physiological switching in bacteria is initiated with the sensing of oxygen availability. While such a sensor has not been identified in C. glutamicum yet, the molecular mechanism for oxygen sensing in related bacteria is also discussed. KEY POINTS: • C. glutamicum produces a wide variety of useful compounds under anaerobic conditions. • C. glutamicum is a versatile cell factory under both aerobic and anaerobic conditions. • Metabolic fate can be overcome by engineering metabolic pathways.

Advances in metabolic engineering of Corynebacterium glutamicum to produce high-value active ingredients for food, feed, human health, and well-being

The soil microbe Corynebacterium glutamicum is a leading workhorse in industrial biotechnology and has become famous for its power to synthetise amino acids and a range of bulk chemicals at high titre and yield. The product portfolio of the microbe is continuously expanding. Moreover, metabolically engineered strains of C. glutamicum produce more than 30 high value active ingredients, including signature molecules of raspberry, savoury, and orange flavours, sun blockers, anti-ageing sugars, and polymers for regenerative medicine. Herein, we highlight recent advances in engineering of the microbe into novel cell factories that overproduce these precious molecules from pioneering proofs-of-concept up to industrial productivity.

Recent advances in the microbial production of C4 alcohols by metabolically engineered microorganisms

BACKGROUND

The heavy global dependence on petroleum-based industries has led to serious environmental problems, including climate change and global warming. As a result, there have been calls for a paradigm shift towards the use of biorefineries, which employ natural and engineered microorganisms that can utilize various carbon sources from renewable resources as host strains for the carbon-neutral production of target products.

PURPOSE AND SCOPE

C4 alcohols are versatile chemicals that can be used directly as biofuels and bulk chemicals and in the production of value-added materials such as plastics, cosmetics, and pharmaceuticals. C4 alcohols can be effectively produced by microorganisms using DCEO biotechnology (tools to design, construct, evaluate, and optimize) and metabolic engineering strategies.

SUMMARY OF NEW SYNTHESIS AND CONCLUSIONS

In this review, we summarize the production strategies and various synthetic tools available for the production of C4 alcohols and discuss the potential development of microbial cell factories, including the optimization of fermentation processes, that offer cost competitiveness and potential industrial commercialization.

Protocatechuate overproduction by Corynebacterium glutamicum via simultaneous engineering of native and heterologous biosynthetic pathways

Protocatechuic acid (3, 4-dihydroxybenzoic acid, PCA) is a natural bioactive phenolic acid potentially valuable as a pharmaceutical raw material owing to its diverse pharmacological activities. Corynebacterium glutamicum forms PCA as a key intermediate in a native pathway to assimilate shikimate/quinate through direct conversion of the shikimate pathway intermediate 3-dehydroshikimate (DHS), which is catalyzed by qsuB-encoded DHS dehydratase (the DHS pathway). PCA can also be formed via an alternate pathway extending from chorismate by introducing heterologous chorismate pyruvate lyase that converts chorismate into 4-hydroxybenzoate (4-HBA), which is then converted into PCA catalyzed by endogenous 4-HBA 3-hydroxylase (the 4-HBA pathway). In this study, we generated three plasmid-free C. glutamicum strains overproducing PCA based on the markerless chromosomal recombination by engineering each or both of the above mentioned two PCA-biosynthetic pathways combined with engineering of the host metabolism to enhance the shikimate pathway flux and to block PCA consumption. Aerobic growth-arrested cell reactions were performed using the resulting engineered strains, which revealed that strains dependent on either the DHS or 4-HBA pathway as the sole PCA-biosynthetic route produced 43.8 and 26.2 g/L of PCA from glucose with a yield of 35.3% and 10.0% (mol/mol), respectively, indicating that PCA production through the DHS pathway is significantly efficient compared to that produced through the 4-HBA pathway. Remarkably, a strain simultaneously using both DHS and 4-HBA pathways achieved the highest reported PCA productivity of 82.7 g/L with a yield of 32.8% (mol/mol) from glucose in growth-arrested cell reaction. These results indicated that simultaneous engineering of both DHS and 4-HBA pathways is an efficient method for PCA production. The generated PCA-overproducing strain is plasmid-free and does not require supplementation of aromatic amino acids and vitamins due to the intact shikimate pathway, thereby representing a promising platform for the industrial bioproduction of PCA and derived chemicals from renewable sugars.

Application of a Pyruvate-Producing Escherichia coli Strain LAFCPCPt-accBC-aceE: A Case Study for d-Lactate Production

Pyruvate, a potential precursor of various chemicals, is one of the fundamental chemicals produced by the fermentation process. We previously reported a pyruvate-producing Escherichia coli strain LAFCPCPt-accBC-aceE (PYR) that has the potential to be applied to the industrial production of pyruvate. In this study, the availability of the PYR strain for the production of pyruvate-derivative chemicals was evaluated using a d-lactate-producing strain (LAC) based on the PYR strain. The LAC strain expresses a d-lactate dehydrogenase-encoding gene from Lactobacillus bulgaricus under the control of a T7 expression system. The d-lactate productivity of the LAC strain was further improved by limiting aeration and changing the induction period for the expression of d-lactate dehydrogenase-encoding gene expression. Under combined conditions, the LAC strain produced d-lactate at 21.7 ± 1.4 g·L−1, which was compatible with the pyruvate production by the PYR strain (26.1 ± 0.9 g·L−1). These results suggest that we have succeeded in the effective conversion of pyruvate to d-lactate in the LAC strain, demonstrating the wide versatility of the parental PYR strain as basal strain for various chemicals production.

Requirement of de novo synthesis of pyruvate carboxylase in long-term succinic acid production in Corynebacterium glutamicum

Protein turnover through de novo synthesis is critical for sustainable cellular functions. We previously found that glucose consumption rate in Corynebacterium glutamicum under anaerobic conditions increased at temperature higher than the upper limit of growth temperature. Here, we showed that production of lactic and succinic acids increased at higher temperature for long-term (48 h) anaerobic reaction in metabolically engineered strains. At 42 °C, beyond the upper limit of growth temperature range, biomass-specific lactic acid production rate was 8% higher than that at 30 °C, the optimal growth temperature. In contrast, biomass-specific succinic acid production rate was highest at 36 °C, 28% higher than that at 30 °C, although the production at 42 °C was still 23% higher than that at 30 °C. As enzymes are usually unstable at high temperatures, we investigated whether protein turnover of metabolic enzymes is required for the production of lactic and succinic acids under these conditions. Interestingly, when de novo protein synthesis was inhibited by addition of chloramphenicol, after 6 h, only succinic acid production was inhibited. Because glycolytic enzymes are involved in both lactic and succinic acids synthesis, enzymes in the anaplerotic pathway and the tricarboxylic acid (TCA) cycle leading to succinic acid synthesis were likely to be responsible for its decreased production. Among the five enzymes examined, the specific activity of only pyruvate carboxylase was drastically decreased after 48 h at 42 °C. Thus, the de novo synthesis of pyruvate carboxylase is required for long-term production of succinic acid. Graphical abstract KEY POINTS: • Long-term reaction for organic acids can be improved at temperature beyond ideal growth conditions. • De novo synthesis of pyruvate carboxylase is required for long-term succinic acid production.

Establishment and application of multiplexed CRISPR interference system in Bacillus licheniformis

Bacillus licheniformis has been regarded as an outstanding microbial cell factory for the production of biochemicals and enzymes. Due to lack of genetic tools to repress gene expression, metabolic engineering and gene function elucidation are limited in this microbe. In this study, an integrated CRISPR interference (CRISPRi) system was constructed in B. licheniformis. Several endogenous genes, including yvmC, cypX, alsD, pta, ldh, and essential gene rpsC, were severed as the targets to test this CRISPRi system, and the repression efficiencies were ranged from 45.02 to 94.00%. Moreover, the multiple genes were simultaneously repressed with high efficiency using this CRISPRi system. As a case study, the genes involved in by-product synthetic and L-valine degradation pathways were selected as the silence targets to redivert metabolic flux toward L-valine synthesis. Repression of acetolactate decarboxylase (alsD) and leucine dehydrogenase (bcd) led to 90.48% and 80.09 % increases in L-valine titer, respectively. Compared with the control strain DW9i△leuA (1.47 g/L and 1.79 g/L), the L-valine titers of combinatorial strain DW9i△leuA/pHYi-alsD-bcd were increased by 1.27-fold and 2.89-fold, respectively, in flask and bioreactor. Collectively, this work provides a feasible approach for multiplex metabolic engineering and functional genome studies of B. licheniformis.

Crystal Structure and Biochemical Characterization of Ketol-Acid Reductoisomerase from Corynebacterium glutamicum

l-Valine belongs to the branched-chain amino acids (BCAAs) and is an essential amino acid that is crucial for all living organisms. l-Valine is industrially produced by the nonpathogenic bacterium Corynebacterium glutamicum and is synthesized by the BCAA biosynthetic pathway. Ketol-acid reductoisomerase (KARI) is the second enzyme in the BCAA pathway and catalyzes the conversion of (S)-2-acetolactate into (R)-2,3-dihydroxy-isovalerate, or the conversion of (S)-2-aceto-2-hydroxybutyrate into (R)-2,3-dihydroxy-3-methylvalerate. To elucidate the enzymatic properties of KARI from C. glutamicum (CgKARI), we successfully produced CgKARI protein and determined its crystal structure in complex with NADP⁺ and two Mg²⁺ ions. Based on the complex structure, docking simulations, and site-directed mutagenesis experiments, we revealed that CgKARI belongs to Class I KARI and identified key residues involved in stabilization of the substrate, metal ions, and cofactor. Furthermore, we confirmed the difference in the binding of metal ions that depended on the conformational change.

Metabolic engineering of l-leucine production in Escherichia coli and Corynebacterium glutamicum: a review

l-Leucine, as an essential branched-chain amino acid for humans and animals, has recently been attracting much attention because of its potential for a fast-growing market demand. The applicability ranges from flavor enhancers, animal feed additives and ingredients in cosmetic to specialty nutrients in pharmaceutical and medical fields. Microbial fermentation is the major method for producing l-leucine by using Escherichia coli and Corynebacterium glutamicum as host bacteria. This review gives an overview of the metabolic pathway of l-leucine (i.e. production, import and export systems) and highlights the main regulatory mechanisms of operons in E. coli and C. glutamicum l-leucine biosynthesis. We summarize here the current trends in metabolic engineering techniques and strategies for manipulating l-leucine producing strains. Finally, future perspectives to construct industrially advantageous strains are considered with respect to recent advances in biology.

Improvement of l-Leucine Production in Corynebacterium glutamicum by Altering the Redox Flux

The production of l-leucine was improved by the disruption of ltbR encoding transcriptional regulator and overexpression of the key genes (leuAilvBNCE) of the l-leucine biosynthesis pathway in Corynebacterium glutamicum XQ-9. In order to improve l-leucine production, we rationally engineered C. glutamicum to enhance l-leucine production, by improving the redox flux. On the basis of this, we manipulated the redox state of the cells by mutating the coenzyme-binding domains of acetohydroxyacid isomeroreductase encoded by ilvC, inserting NAD-specific leucine dehydrogenase, encoded by leuDH from Lysinibacillus sphaericus, and glutamate dehydrogenase encoded by rocG from Bacillus subtilis, instead of endogenous branched-chain amino acid transaminase and glutamate dehydrogenase, respectively. The yield of l-leucine reached 22.62 ± 0.17 g·L^-1 by strain ΔLtbR-acetohydroxyacid isomeroreductase (AHAIR)^M/ABNC^ME, and the concentrations of the by-products (l-valine and l-alanine) increased, compared to the strain ΔLtbR/ABNCE. Strain ΔLtbR-AHAIR^MLeuDH/ABNC^MLDH accumulated 22.87±0.31 g·L^-1 l-leucine, but showed a drastically low l-valine accumulation (from 8.06 ± 0.35 g·L^-1 to 2.72 ± 0.11 g·L^-1), in comparison to strain ΔLtbR-AHAIR^M/ABNC^ME, which indicated that LeuDH has much specificity for l-leucine synthesis but not for l-valine synthesis. Subsequently, the resultant strain ΔLtbR-AHAIR^MLeuDHRocG/ABNC^MLDH accumulated 23.31 ± 0.24 g·L^-1 l-leucine with a glucose conversion efficiency of 0.191 g·g^-1.

Application of leucine dehydrogenase Bcd from Bacillus subtilis for l-valine synthesis in Escherichia coli under microaerobic conditions

Microaerobic cultivation conditions have been shown experimentally and theoretically to improve the performance of a number of bioproduction systems. However, under these conditions, the production of l-valine by Escherichia coli is decreased mainly because of a redox cofactor imbalance and a decreased l-glutamate supply. The synthesis of one mole of l-valine from one mole of glucose generates two moles of NADH via glycolysis but consumes a total of two moles of NADPH, one in the ketol-acid reductoisomerase (KARI) reaction and the other in the regeneration of l-glutamate as an amino group donor for the branched-chain amino acid aminotransferase (BCAT) reaction. The improvement of l-valine synthesis under oxygen deprivation may be due to solving these problems. Increased l-valine synthesis under oxygen deprivation conditions was previously shown in Corynebacterium glutamicum (Hasegawa et al., 2012). In this study, we have proposed the use of NADH-dependent leucine dehydrogenase (LeuDH; EC 1.4.1.9) Bcd from B. subtilis instead of the native NADPH-dependent pathway including aminotransferase encoded by ilvE to improve l-valine production in E. coli under microaerobic conditions. We have created l-valine-producing strains on the base of the aminotransferase B-deficient strain V1 (B-7 ΔilvBN ΔilvIH ΔilvGME::P_L-ilvBN^N17KDA) by introducing one chromosomal copy of the bcd gene or the ilvE gene. Evaluation of the l-valine production by the obtained strains under microaerobic and aerobic conditions revealed that leucine dehydrogenase Bcd had a higher potential for l-valine production under microaerobic conditions. The Bcd-possessing strain exhibited 2.2-fold higher l-valine accumulation (up to 9.1 g/L) and 2.0-fold higher yield (up to 35.3%) under microaerobic conditions than the IlvE-possessing strain. The obtained results could be interpreted as follows: an altering of redox cofactor balance in the l-valine biosynthesis pathway increased the production and yield by E. coli cells under microaerobic conditions. Thus, the effective synthesis of l-valine by means of “valine fermentation” was shown in E. coli. This methodology has the advantages of being an economical and environmentally friendly process.

Efficient mining of natural NADH-utilizing dehydrogenases enables systematic cofactor engineering of lysine synthesis pathway of Corynebacterium glutamicum

Increasing the availability of NADPH is commonly used to improve lysine production by Corynebacterium glutamicum since 4 mol of NADPH are required for the synthesis of 1 mol of lysine. Alternatively, engineering of enzymes in lysine synthesis pathway to utilize NADH directly can also be explored for cofactor balance during lysine overproduction. To achieve such a goal, enzyme mining was used in this study to quickly identify a full set of NADH-utilizing dehydrogenases, namely aspartate dehydrogenase from Pseudomonas aeruginosa (PaASPDH), aspartate-semialdehyde dehydrogenase from Tistrella mobilis (TmASADH), dihydrodipicolinate reductase from Escherichia coli (EcDHDPR), and diaminopimelate dehydrogenase from Pseudothermotoga thermarum (PtDAPDH). This allowed us to systematically perturb cofactor utilization of lysine synthesis pathway of C. glutamicum for the first time. Individual overexpression of PaASPDH, TmASADH, EcDHDPR, and PtDAPDH in C. glutamicum LC298, a basic lysine producer, increased the production of lysine by 30.7%, 32.4%, 17.4%, and 36.8%, respectively. Combinatorial replacement of NADPH-dependent dehydrogenases in C. glutamicum ATCC 21543, a lysine hyperproducer, also resulted in significantly improved lysine production. The highest increase of lysine production (30.7%) was observed for a triple-mutant strain (27.7 g/L, 0.35 g/g glucose) expressing PaASPDH, TmASADH, and EcDHDPR. A quadruple-mutant strain expressing all of the four NADH-utilizing enzymes allowed high lysine production (24.1 g/L, 0.30 g/g glucose) almost independent of the oxidative pentose phosphate pathway. Collectively, our results demonstrated that a combination of enzyme mining and cofactor engineering was a highly efficient approach to improve lysine production. Similar strategies can be applied for the production of other amino acids or their derivatives.

NADH/NADPH bi-cofactor-utilizing and thermoactive ketol-acid reductoisomerase from Sulfolobus acidocaldarius

Ketol-acid reductoisomerase (KARI) is a bifunctional enzyme in the second step of branched-chain amino acids biosynthetic pathway. Most KARIs prefer NADPH as a cofactor. However, KARI with a preference for NADH is desirable in industrial applications including anaerobic fermentation for the production of branched-chain amino acids or biofuels. Here, we characterize a thermoacidophilic archaeal Sac-KARI from Sulfolobus acidocaldarius and present its crystal structure at a 1.75-Å resolution. By comparison with other holo-KARI structures, one sulphate ion is observed in each binding site for the 2′-phosphate of NADPH, implicating its NADPH preference. Sac-KARI has very high affinity for NADPH and NADH, with K_M values of 0.4 μM for NADPH and 6.0 μM for NADH, suggesting that both are good cofactors at low concentrations although NADPH is favoured over NADH. Furthermore, Sac-KARI can catalyze 2(S)-acetolactate (2S-AL) with either cofactor from 25 to 60 °C, but the enzyme has higher activity by using NADPH. In addition, the catalytic activity of Sac-KARI increases significantly with elevated temperatures and reaches an optimum at 60 °C. Bi-cofactor utilization and the thermoactivity of Sac-KARI make it a potential candidate for use in metabolic engineering or industrial applications under anaerobic or harsh conditions.

Rational modification of Corynebacterium glutamicum dihydrodipicolinate reductase to switch the nucleotide-cofactor specificity for increasing l-lysine production

l-lysine is an important amino acid in animals and humans and NADPH is a vital cofactor for maximizing the efficiency of l-lysine fermentation. Dihydrodipicolinate reductase (DHDPR), an NAD(P)H-dependent enzyme, shows a variance in nucleotide-cofactor affinity in bacteria. In this study, we rationally engineered Corynebacterium glutamicum DHDPR (CgDHDPR) to switch its nucleotide-cofactor specificity resulting in an increase in final titer (from 82.6 to 117.3 g L^-1 ), carbon yield (from 0.35 to 0.44 g [g glucose]^-1 ) and productivity (from 2.07 to 2.93 g L^-1  hr^-1 ) of l-lysine in JL-6 ΔdapB::Ec-dapB^C115G,G116C in fed-batch fermentation. To do this, we comparatively analyzed the characteristics of CgDHDPR and Escherichia coli DHDPR (EcDHDPR), indicating that hetero-expression of NADH-dependent EcDHDPR increased l-lysine production. Subsequently, we rationally modified the conserved structure of cofactor-binding motif, and results indicated that introducing the mutation K11A or R13A in CgDHDPR and introducing the mutation R16A or R39A in EcDHDPR modifies the nucleotide-cofactor affinity of DHDPR. Lastly, the effects of these mutated DHDPRs on l-lysine production were investigated. The highest increase (26.2%) in l-lysine production was observed for JL-6 ΔdapB::Ec-dapB^C115G,G116C , followed by JL-6 Cg-dapB^C37G,G38C (21.4%) and JL-6 ΔdapB::Ec-dapB^C46G,G47C (15.2%). This is the first report of a rational modification of DHDPR that enhances the l-lysine production and yield through the modulation of nucleotide-cofactor specificity.

NADPH metabolism: a survey of its theoretical characteristics and manipulation strategies in amino acid biosynthesis

Reduced nicotinamide adenine nucleotide phosphate (NADPH), which is one of the key cofactors in the metabolic network, plays an important role in the biochemical reactions, and physiological function of amino acid-producing strains. The manipulation of NADPH availability and form is an efficient and easy method of redirecting the carbon flux to the amino acid biosynthesis in industrial strains. In this review, we survey the metabolic mode of NADPH. Furthermore, we summarize the research developments in the understanding of the relationship between NADPH metabolism and amino acid biosynthesis. Detailed strategies to manipulate NADPH availability are addressed based on this knowledge. Finally, the uses of NADPH manipulation strategies to enhance the metabolic function of amino acid-producing strains are discussed.

Efficient construction of xenogeneic genomic libraries by circumventing restriction-modification systems that restrict methylated DNA

An efficient method to construct xenogeneic genomic libraries with low errors and bias by circumventing restriction-modification systems that restrict methylated DNA was developed. Un-methylated genomic DNA of Escherichia coli prepared by ϕ29 DNA polymerase was introduced to Corynebacterium glutamicum R after ligation with un-methylated vector plasmids.

Protein engineering of oxidoreductases utilizing nicotinamide-based coenzymes, with applications in synthetic biology

Two natural nicotinamide-based coenzymes (NAD and NADP) are indispensably required by the vast majority of oxidoreductases for catabolism and anabolism, respectively. Most NAD(P)-dependent oxidoreductases prefer one coenzyme as an electron acceptor or donor to the other depending on their different metabolic roles. This coenzyme preference associated with coenzyme imbalance presents some challenges for the construction of high-efficiency in vivo and in vitro synthetic biology pathways. Changing the coenzyme preference of NAD(P)-dependent oxidoreductases is an important area of protein engineering, which is closely related to product-oriented synthetic biology projects. This review focuses on the methodology of nicotinamide-based coenzyme engineering, with its application in improving product yields and decreasing production costs. Biomimetic nicotinamide-containing coenzymes have been proposed to replace natural coenzymes because they are more stable and less costly than natural coenzymes. Recent advances in the switching of coenzyme preference from natural to biomimetic coenzymes are also covered in this review. Engineering coenzyme preferences from natural to biomimetic coenzymes has become an important direction for coenzyme engineering, especially for in vitro synthetic pathways and in vivo bioorthogonal redox pathways.

Microbial Production of Amino Acid-Related Compounds

Corynebacterium glutamicum is the workhorse of the production of proteinogenic amino acids used in food and feed biotechnology. After more than 50 years of safe amino acid production, C. glutamicum has recently also been engineered for the production of amino acid-derived compounds, which find various applications, e.g., as synthons for the chemical industry in several markets including the polymer market. The amino acid-derived compounds such as non-proteinogenic ω-amino acids, α,ω-diamines, and cyclic or hydroxylated amino acids have similar carbon backbones and functional groups as their amino acid precursors. Decarboxylation of amino acids may yield ω-amino acids such as β-alanine, γ-aminobutyrate, and δ-aminovalerate as well as α,ω-diamines such as putrescine and cadaverine. Since transamination is the final step in several amino acid biosynthesis pathways, 2-keto acids as immediate amino acid precursors are also amenable to production using recombinant C. glutamicum strains. Approaches for metabolic engineering of C. glutamicum for production of amino acid-derived compounds will be described, and where applicable, production from alternative carbon sources or use of genome streamline will be referred to. The excellent large-scale fermentation experience with C. glutamicum offers the possibility that these amino acid-derived speciality products may enter large-volume markets.

A Genome-Scale Model of Shewanella piezotolerans Simulates Mechanisms of Metabolic Diversity and Energy Conservation

The well-studied nature of the metabolic diversity of Shewanella bacteria makes species from this genus a promising platform for investigating the evolution of carbon metabolism and energy conservation. The Shewanella phylogeny is diverged into two major branches, referred to as group 1 and group 2. While the genotype-phenotype connections of group 2 species have been extensively studied with metabolic modeling, a genome-scale model has been missing for the group 1 species. The metabolic reconstruction of Shewanella piezotolerans strain WP3 represented the first model for Shewanella group 1 and the first model among piezotolerant and psychrotolerant deep-sea bacteria. The model brought insights into the mechanisms of energy conservation in WP3 under anaerobic conditions and highlighted its metabolic flexibility in using diverse carbon sources. Overall, the model opens up new opportunities for investigating energy conservation and metabolic adaptation, and it provides a prototype for systems-level modeling of other deep-sea microorganisms.

Shewanella piezotolerans strain WP3 belongs to the group 1 branch of the Shewanella genus and is a piezotolerant and psychrotolerant species isolated from the deep sea. In this study, a genome-scale model was constructed for WP3 using a combination of genome annotation, ortholog mapping, and physiological verification. The metabolic reconstruction contained 806 genes, 653 metabolites, and 922 reactions, including central metabolic functions that represented nonhomologous replacements between the group 1 and group 2 Shewanella species. Metabolic simulations with the WP3 model demonstrated consistency with existing knowledge about the physiology of the organism. A comparison of model simulations with experimental measurements verified the predicted growth profiles under increasing concentrations of carbon sources. The WP3 model was applied to study mechanisms of anaerobic respiration through investigating energy conservation, redox balancing, and the generation of proton motive force. Despite being an obligate respiratory organism, WP3 was predicted to use substrate-level phosphorylation as the primary source of energy conservation under anaerobic conditions, a trait previously identified in other Shewanella species. Further investigation of the ATP synthase activity revealed a positive correlation between the availability of reducing equivalents in the cell and the directionality of the ATP synthase reaction flux. Comparison of the WP3 model with an existing model of a group 2 species, Shewanella oneidensis MR-1, revealed that the WP3 model demonstrated greater flexibility in ATP production under the anaerobic conditions. Such flexibility could be advantageous to WP3 for its adaptation to fluctuating availability of organic carbon sources in the deep sea.

IMPORTANCE The well-studied nature of the metabolic diversity of Shewanella bacteria makes species from this genus a promising platform for investigating the evolution of carbon metabolism and energy conservation. The Shewanella phylogeny is diverged into two major branches, referred to as group 1 and group 2. While the genotype-phenotype connections of group 2 species have been extensively studied with metabolic modeling, a genome-scale model has been missing for the group 1 species. The metabolic reconstruction of Shewanella piezotolerans strain WP3 represented the first model for Shewanella group 1 and the first model among piezotolerant and psychrotolerant deep-sea bacteria. The model brought insights into the mechanisms of energy conservation in WP3 under anaerobic conditions and highlighted its metabolic flexibility in using diverse carbon sources. Overall, the model opens up new opportunities for investigating energy conservation and metabolic adaptation, and it provides a prototype for systems-level modeling of other deep-sea microorganisms.

Heteroleptic Copper(I) Complexes of "Scorpionate" Bis-pyrazolyl Carboxylate Ligand with Auxiliary Phosphine as Potential Anticancer Agents: An Insight into Cytotoxic Mode

New copper(I) complexes [CuCl(PPh₃)(L)] (1: L = L_A = 4-carboxyphenyl)bis(3,5-dimethylpyrazolyl)methane; (2: L = L_B = 3-carboxyphenyl)bis(3,5-dimethylpyrazolyl)methane) were prepared and characterised by elemental analysis and various spectroscopic techniques such as FT-IR, NMR, UV–Vis, and ESI-MS. The molecular structures of complexes 1 and 2 were analyzed by theoretical B3LYP/DFT method. Furthermore, in vitro DNA binding studies were carried out to check the ability of complexes 1 and 2 to interact with native calf thymus DNA (CT-DNA) using absorption titration, fluorescence quenching and circular dichroism, which is indicative of more avid binding of the complex 1. Moreover, DNA mobility assay was also conducted to study the concentration-dependent cleavage pattern of pBR322 DNA by complex 1, and the role of ROS species to have a mechanistic insight on the cleavage pattern, which ascertained substantial roles by both hydrolytic and oxidative pathways. Additionally, we analyzed the potential of the interaction of complex 1 with DNA and enzyme (Topo I and II) with the aid of molecular modeling. Furthermore, cytotoxic activity of complex 1 was tested against HepG2 cancer cell lines. Thus, the potential of the complex 1 is promising though further in vivo investigations may be required before subjecting it to clinical trials.

A General Tool for Engineering the NAD/NADP Cofactor Preference of Oxidoreductases

The ability to control enzymatic nicotinamide cofactor utilization is critical for engineering efficient metabolic pathways. However, the complex interactions that determine cofactor-binding preference render this engineering particularly challenging. Physics-based models have been insufficiently accurate and blind directed evolution methods too inefficient to be widely adopted. Building on a comprehensive survey of previous studies and our own prior engineering successes, we present a structure-guided, semirational strategy for reversing enzymatic nicotinamide cofactor specificity. This heuristic-based approach leverages the diversity and sensitivity of catalytically productive cofactor binding geometries to limit the problem to an experimentally tractable scale. We demonstrate the efficacy of this strategy by inverting the cofactor specificity of four structurally diverse NADP-dependent enzymes: glyoxylate reductase, cinnamyl alcohol dehydrogenase, xylose reductase, and iron-containing alcohol dehydrogenase. The analytical components of this approach have been fully automated and are available in the form of an easy-to-use web tool: Cofactor Specificity Reversal-Structural Analysis and Library Design (CSR-SALAD).

Enhanced Glucose Consumption and Organic Acid Production by Engineered Corynebacterium glutamicum Based on Analysis of a pfkB1 Deletion Mutant

In the analysis of a carbohydrate metabolite pathway, we found interesting phenotypes in a mutant strain of Corynebacterium glutamicum deficient in pfkB1, which encodes fructose-1-phosphate kinase. After being aerobically cultivated with fructose as a carbon source, this mutant consumed glucose and produced organic acid, predominantly l-lactate, at a level more than 2-fold higher than that of the wild-type grown with glucose under conditions of oxygen deprivation. This considerably higher fermentation capacity was unique for the combination of pfkB1 deletion and cultivation with fructose. In the metabolome and transcriptome analyses of this strain, marked intracellular accumulation of fructose-1-phosphate and significant upregulation of several genes related to the phosphoenolpyruvate:carbohydrate phosphotransferase system, glycolysis, and organic acid synthesis were identified. We then examined strains overexpressing several of the identified genes and demonstrated enhanced glucose consumption and organic acid production by these engineered strains, whose values were found to be comparable to those of the model pfkB1 deletion mutant grown with fructose. l-Lactate production by the ppc deletion mutant of the engineered strain was 2,390 mM (i.e., 215 g/liter) after 48 h under oxygen deprivation, which was a 2.7-fold increase over that of the wild-type strain with a deletion of ppc IMPORTANCE: Enhancement of glycolytic flux is important for improving microbiological production of chemicals, but overexpression of glycolytic enzymes has often resulted in little positive effect. That is presumably because the central carbon metabolism is under the complex and strict regulation not only transcriptionally but also posttranscriptionally, for example, by the ATP/ADP ratio. In contrast, we studied a mutant strain of Corynebacterium glutamicum that showed markedly enhanced glucose consumption and organic acid production and, based on the findings, identified several genes whose overexpression was effective in enhancing glycolytic flux under conditions of oxygen deprivation. These results will further understanding of the regulatory mechanisms of glycolytic flux and can be widely applied to the improvement of the microbial production of useful chemicals.