Dense autotrophic cultures of Alcaligenes eutrophus

Microbial gas fermentation technology for sustainable food protein production

The development of novel, sustainable, and robust food production technologies represents one of the major pillars to address the most significant challenges humanity is going to face on earth in the upcoming decades - climate change, population growth, and resource depletion. The implementation of microfoods, i.e., foods formulated with ingredients from microbial cultivation, into the food supply chain has a huge potential to contribute towards energy-efficient and nutritious food manufacturing and represents a means to sustainably feed a growing world population. This review recapitulates and assesses the current state in the establishment and usage of gas fermenting bacteria as an innovative feedstock for protein production. In particular, we focus on the most promising representatives of this taxon: the hydrogen-oxidizing bacteria (hydrogenotrophs) and the methane-oxidizing bacteria (methanotrophs). These unicellular microorganisms can aerobically metabolize gaseous hydrogen and methane, respectively, to provide the required energy for building up cell material. A protein yield over 70% in the dry matter cell mass can be reached with no need for arable land and organic substrates making it a promising alternative to plant- and animal-based protein sources. We illuminate the holistic approach to incorporate protein extracts obtained from the cultivation of gas fermenting bacteria into microfoods. Herein, the fundamental properties of the bacteria, cultivation methods, downstream processing, and potential food applications are discussed. Moreover, this review covers existing and future challenges as well as sustainability aspects associated with the production of microbial protein through gas fermentation.

Construction of Cupriavidus necator displayed with superoxide dismutases for enhanced growth in bioelectrochemical systems

It is of great significance to utilize CO2 as feedstock to synthesize biobased products, particularly single cell protein (SCP) as the alternative food and feed. Bioelectrochemical system (BES) driven by clean electric energy has been regarded as a promising way for Cupriavidus necator to produce SCP from CO2 directly. At present, the key problem of culturing C. necator in BES is that reactive oxygen species (ROS) generated in cathode chamber are harmful to bacterial growth. Therefore, it is necessary to find a solution to mitigate the negative effect of ROS. In this study, we constructed a number of C. necator strains displayed with superoxide dismutase (SOD), which allowed the decomposition of superoxide anion radical. The effects of promoters and signal peptides on the cell surface displayed SOD were analyzed. The proteins displayed on the surface were further verified by the fluorescence experiment. Finally, the growth of C. necator CMS incorporating a pBAD-SOD-E-tag-IgAβ plasmid could achieve 4.9 ± 1.0 of OD600 by 7 days, equivalent to 1.7 ± 0.3 g/L dry cell weight (DCW), and the production rate was 0.24 ± 0.04 g/L/d DCW, around 2.7-fold increase than the original C. necator CMS (1.8 ± 0.3 of OD600). This study can provide an effective and novel strategy of cultivating strains for the production of CO2-derived SCP or other chemicals in BES.

Hydrogen-oxidizing bacteria and their applications in resource recovery and pollutant removal

Hydrogen oxidizing bacteria (HOB), a type of chemoautotroph, are a group of bacteria from different genera that share the ability to oxidize H₂ and fix CO₂ to provide energy and synthesize cellular material. Recently, HOB have received growing attention due to their potential for CO₂ capture and waste recovery. This review provides a comprehensive overview of the biological characteristics of HOB and their application in resource recovery and pollutant removal. Firstly, the enzymes, genes and corresponding regulation systems responsible for the key metabolic processes of HOB are discussed in detail. Then, the enrichment and cultivation methods including the coupled water splitting-biosynthetic system cultivation, mixed cultivation and two-stage cultivation strategies for HOB are summarized, which is the critical prerequisite for their application. On the basis, recent advances of HOB application in the recovery of high-value products and the removal of pollutants are presented. Finally, the key points for future investigation are proposed that more attention should be paid to the main limitations in the large-scale industrial application of HOB, including the mass transfer rate of the gases, the safety of the production processes and products, and the commercial value of the products.

Lab-Scale Cultivation of Cupriavidus necator on Explosive Gas Mixtures: Carbon Dioxide Fixation into Polyhydroxybutyrate

Aerobic, hydrogen oxidizing bacteria are capable of efficient, non-phototrophic CO2 assimilation, using H2 as a reducing agent. The presence of explosive gas mixtures requires strict safety measures for bioreactor and process design. Here, we report a simplified, reproducible, and safe cultivation method to produce Cupriavidus necator H16 on a gram scale. Conditions for long-term strain maintenance and mineral media composition were optimized. Cultivations on the gaseous substrates H2, O2, and CO2 were accomplished in an explosion-proof bioreactor situated in a strong, grounded fume hood. Cells grew under O2 control and H2 and CO2 excess. The starting gas mixture was H2:CO2:O2 in a ratio of 85:10:2 (partial pressure of O2 0.02 atm). Dissolved oxygen was measured online and was kept below 1.6 mg/L by a stepwise increase of the O2 supply. Use of gas compositions within the explosion limits of oxyhydrogen facilitated production of 13.1 ± 0.4 g/L total biomass (gram cell dry mass) with a content of 79 ± 2% poly-(R)-3-hydroxybutyrate in a simple cultivation set-up with dissolved oxygen as the single controlled parameter. Approximately 98% of the obtained PHB was formed from CO2.

Investigation of the robustness of Cupriavidus necator engineered strains during fed-batch cultures

It is of major interest to ensure stable and performant microbial bioprocesses, therefore maintaining high strain robustness is one of the major future challenges in industrial microbiology. Strain robustness can be defined as the persistence of genotypic and/or phenotypic traits in a system. In this work, robustness of an engineered strain is defined as plasmid expression stability, cultivability, membrane integrity and macroscopic cell behavior and was assessed in response to implementations of sugar feeding strategies (pulses and continuous) and two plasmid stabilization systems (kanamycin resistance and Post-Segregational Killing hok/sok). Fed-batch bioreactor cultures, relevant mode to reach high cell densities and higher cell generation number, were implemented to investigate the robustness of C. necator engineered strains. Host cells bore a recombinant plasmid encoding for a plasmid expression level monitoring system, based on eGFP fluorescence quantified by flow cytometry. We first showed that well-controlled continuous feeding in comparison to a pulse-based feeding allowed a better carbon use for protein synthesis (avoiding organic acid excretion), a lower heterogeneity of the plasmid expression and a lower cell permeabilization. Moreover, the plasmid stabilization system Post-Segregational Killing hok/sok, an autonomous system independent on external addition of compounds, showed the best ability to maintain plasmid expression level stability insuring a greater population homogeneity in the culture. Therefore, in the case of engineered C. necator, the PSK system hok/sok appears to be a relevant and an efficient alternative to antibiotic resistance system for selection pressure, especially, in the case of bioprocess development for economic and environmental reasons.

First time β-farnesene production by the versatile bacterium Cupriavidus necator

Background

Terpenes are remarkably diverse natural structures, which can be formed via two different pathways leading to two common intermediates. Among those, sesquiterpenes represent a variety of industrially relevant products. One important industrially produced product is β-farnesene as a precursor for a jet fuel additive. So far, microbial terpene production has been mostly limited to known production hosts, which are only able to grow on heterotrophic substrates.

Results

In this paper, we for the first time describe β-farnesene production by the versatile bacterial host Cupriavidus necator on fructose, which is known to grow hetero- and autotrophically and even in bioelectrochemical systems. We were able to show a growth-dependent production of β-farnesene by expressing the β-farnesene synthase from Artemisia annua in C. necator H16 PHB^-4. Additionally, we performed a scale-up in a parallel reactor system with production titers of 26.3 ± 1.3 µM β-farnesene with a fed-batch process.

Conclusions

The β-farnesene production titers reported in this paper are not in the same range as titers published with known heterotrophic producers E. coli or S. cerevisiae. However, this proof-of-principle study with C. necator as production host opens new synthesis routes toward a sustainable economy and leaves room for further optimizations, which have been already performed with the known production strains.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12934-021-01562-x.

Protein recovery as a resource from waste specifically via membrane technology-from waste to wonder

Economic growth and the rapid increase in the world population has led to a greater need for natural resources, which in turn, has put pressure on said resources along with the environment. Water, food, and energy, among other resources, pose a huge challenge. Numerous essential resources, including organic substances and valuable nutrients, can be found in wastewater, and these could be recovered with efficient technologies. Protein recovery from waste streams can provide an alternative resource that could be utilized as animal feed. Membrane separation, adsorption, and microbe-assisted protein recovery have been proposed as technologies that could be used for the aforementioned protein recovery. This present study focuses on the applicability of different technologies for protein recovery from different wastewaters. Membrane technology has been proven to be efficient for the effective concentration of proteins from waste sources. The main emphasis of the present short communication is to explore the possible strategies that could be utilized to recover or restore proteins from different wastewater sources. The presented study emphasizes the applicability of the recovery of proteins from various waste sources using membranes and the combination of the membrane process. Future research should focus on novel technologies that can help in the efficient extraction of these high-value compounds from wastes. Lastly, this short communication will evaluate the possibility of integrating membrane technology. This study will discuss the important proteins present in different industrial waste streams, such as those of potatoes, poultry, dairy, seafood and alfalfa, and the possible state of the art technologies for the recovery of these valuable proteins from the wastewater.

Hydrogen oxidizing bacteria are capable of removing orthophosphate to ultra-low concentrations in a fed batch reactor configuration

This paper proposes the use of hydrogen oxidizing bacteria (HOB) for the removal of orthophosphate from surface water as treatment step to prevent cyanobacterial blooms. To be effective as an orthophosphate removal strategy, an efficient transfer of hydrogen to the HOB is essential. A trickling filter was selected for this purpose. Using this system, a removal rate of 11.32 ± 0.43 mg PO₄^-3-P/L.d was achieved. The HOB biomass, developed on the trickling filter, is composed of 1.25% phosphorus on dry matter, which suggests that the orthophosphate removal principle is based on HOB growth. Cyanobacterial growth assays of the untreated and treated water showed that Synechocystis sp was only able to grow in the untreated water. Orthophosphate was removed to average residual values of 0.008 mg/L. In this proof of principle study, it is shown that HOB are able to remove orthophosphate from water to concentrations that prevent cyanobacterial growth.

Engineering the Dark Food Chain

Meeting global food needs in the face of climate change and resource limitation requires innovative approaches to food production. Here, we explore incorporation of new dark food chains into human food systems, drawing inspiration from natural ecosystems, the history of single cell protein, and opportunities for new food production through wastewater treatment, microbial protein production, and aquaculture. The envisioned dark food chains rely upon chemoautotrophy in lieu of photosynthesis, with primary production based upon assimilation of CH₄ and CO₂ by methane- and hydrogen-oxidizing bacteria. The stoichiometry, kinetics, and thermodynamics of these bacteria are evaluated, and opportunities for recycling of carbon, nitrogen, and water are explored. Because these processes do not require light delivery, high volumetric productivities are possible; because they are exothermic, heat is available for downstream protein processing; because the feedstock gases are cheap, existing pipeline infrastructure could facilitate low-cost energy-efficient delivery in urban environments. Potential life-cycle benefits include: a protein alternative to fishmeal; partial decoupling of animal feed from human food; climate change mitigation due to decreased land use for agriculture; efficient local cycling of carbon and nutrients that offsets the need for energy-intensive fertilizers; and production of high value products, such as the prebiotic polyhydroxybutyrate.

Growth medium and electrolyte-How to combine the different requirements on the reaction solution in bioelectrochemical systems using Cupriavidus necator

Microbial electrosynthesis is a relatively new research field where microbial carbon dioxide fixation based on the energy supplied by a cathode is investigated. Reaction media used in such bioelectrochemical systems have to fulfill requirements of classical biotechnology as well as electrochemistry. The design and characterization of a medium that enables fast electroautotrophic growth of Cupriavidus necator in microbial electrosynthesis was investigated in detail. The identified chloride-free medium mainly consists of low buffer concentration and is supplied with trace elements. Biotechnologically relevant parameters, such as high-specific growth rates and short lag phases, were determined for growth characterization. Fast growth under all conditions tested, i.e. heterotrophic, autotrophic and electroautotrophic was achieved. The lag phase was shortened by increasing the FeSO₄ concentration. Additionally, electrochemical robustness of the reaction media was proven. Under reductive conditions, no deposits on electrodes or precipitations in the media were observed and no detectable hydrogen peroxide evolved. In the bioelectrochemical system, no lag phase occurred and specific growth rate of C. necator was 0.09 h⁻¹. Using this medium shortens seed train drastically and enables fast electrobiotechnological production processes based on C. necator.

Autotrophic nitrogen assimilation and carbon capture for microbial protein production by a novel enrichment of hydrogen-oxidizing bacteria

Domestic used water treatment systems are currently predominantly based on conventional resource inefficient treatment processes. While resource recovery is gaining momentum it lacks high value end-products which can be efficiently marketed. Microbial protein production offers a valid and promising alternative by upgrading low value recovered resources into high quality feed and also food. In the present study, we evaluated the potential of hydrogen-oxidizing bacteria to upgrade ammonium and carbon dioxide under autotrophic growth conditions. The enrichment of a generic microbial community and the implementation of different culture conditions (sequenced batch resp. continuous reactor) revealed surprising features. At low selection pressure (i.e. under sequenced batch culture at high solid retention time), a very diverse microbiome with an important presence of predatory Bdellovibrio spp. was observed. The microbial culture which evolved under high rate selection pressure (i.e. dilution rate D = 0.1 h(-1)) under continuous reactor conditions was dominated by Sulfuricurvum spp. and a highly stable and efficient process in terms of N and C uptake, biomass yield and volumetric productivity was attained. Under continuous culture conditions the maximum yield obtained was 0.29 g cell dry weight per gram chemical oxygen demand equivalent of hydrogen, whereas the maximum volumetric loading rate peaked 0.41 g cell dry weight per litre per hour at a protein content of 71%. Finally, the microbial protein produced was of high nutritive quality in terms of essential amino acids content and can be a suitable substitute for conventional feed sources such as fishmeal or soybean meal.

Resource recovery from used water: the manufacturing abilities of hydrogen-oxidizing bacteria

Resources in used water are at present mainly destroyed rather than reused. Recovered nutrients can serve as raw material for the sustainable production of high value bio-products. The concept of using hydrogen and oxygen, produced by green or off-peak energy by electrolysis, as well as the unique capability of autotrophic hydrogen oxidizing bacteria to upgrade nitrogen and minerals into valuable microbial biomass, is proposed. Both axenic and mixed microbial cultures can thus be of value to implement re-synthesis of recovered nutrients in biomolecules. This process can become a major line in the sustainable "water factory" of the future.

Intra- and interspecies transfer and expression of Rhizobium japonicum hydrogen uptake genes and autotrophic growth capability

Cosmids containing hydrogen uptake genes have previously been isolated in this laboratory. Four new cosmids that contain additional hup gene(s) have now been identified by conjugal transfer of a Rhizobium japonicum 122DES gene bank into a Tn5-generated Hup(-) mutant and screening for the acquisition of Hup activity. The newly isolated cosmids, pHU50-pHU53, contain part of the previously isolated pHU1 but extend as far as 20 kilobases beyond its border. pHU52 complements five of six Hup(-) mutants and confers activity on several Hup(-) wild-type R. japonicum strains in the free-living state and where tested in nodules. Transconjugants obtained from interspecies transfer of pHU52 to Rhizobium meliloti 102F28, 102F32, and 102F51 and Rhizobium leguminosarum 128C53 showed hydrogen-dependent methyleneblue reduction, performed the oxyhydrogen reaction, and showed hydrogen-dependent autotrophic growth by virtue of the introduced genes. The identity of the presumptive transconjugants was confirmed by antibiotic-resistance profiles and by plant nodulation tests.

Construction of a Rhizobium japonicum gene bank and use in isolation of a hydrogen uptake gene

A gene bank of Rhizobium japonicum DNA was constructed by using the broad host range conjugative cosmid pLAFR1. Eighty-three percent of the clones in the bank contained cosmids with insert DNA averaging 22.6 kilobase pairs in length. A series of cosmids containing a hydrogen uptake (hup) gene was identified by transferring the gene bank into a H(2) uptake-negative (Hup(-)) R. japonicum point mutant (PJ17nal) and screening tetracycline-resistant colonies for the ability to grow chemolithotrophically and to reduce methylene blue in a recently devised colony assay. Hup(+) transconjugants arose at a frequency of approximately 6 x 10(-3). Plasmid DNAs from II of the Hup(+) transconjugants were isolated and used to transform Escherichia coli. EcoRI digests of all plasmids isolated from Hup(+) transconjugants had three DNA fragments in common. Eight of the E. coli transformants containing hup gene cosmids were conjugated with PJ17nal and another Hup(-) point mutant, PJ18nal. All PJ17nal transconjugants were Hup(+). The frequency of Hup(+) transconjugants with PJ18nal was approximately 10(-3). The results indicate that the hup gene cosmids may contain one gene and a portion of another.

Symbiotic Expression of Cosmid-Borne Bradyrhizobium japonicum Hydrogenase Genes

The expression of cosmid-borne Bradyrhizobium japonicum hydrogenase genes in alfalfa, clover, and soybean nodules harboring Rhizobium transconjugants was studied. Cosmid pHU52 conferred hydrogen uptake (Hup) activity in both free-living bacteria and in nodules on the different plant hosts, although in nodules the instability of the cosmid resulted in low levels of Hup activity. In contrast, cosmid pHU1, which does not confer Hup activity on free-living bacteria, gave a Hup phenotype in nodules on alfalfa and soybean. Nodules formed by B. japonicum USDA 123Spc(pHU1) recycled about 90% of nitrogenase-mediated hydrogen evolution. Both subunits of hydrogenase (30- and 60-kilodalton polypeptides) were detected in enzyme-linked immunosorbent assays of bacteroid preparations from nodules harboring B. japonicum strains with pHU1 or pHU52. Neither pHU53 nor pLAFR1 conferred detectable Hup activity in either nodules or free-living bacteria. Based on the physical maps of pHU1 and pHU52, it is suggested that a 5.5-kilobase EcoRI fragment unique to pHU52 contains a gene or part of a gene required for Hup activity in free-living bacteria but not in nodules. This conclusion is supported by the observation that two Tn5 insertions in the chromosome of B. japonicum USDA 122DES obtained by marker exchange with Tn5-mutagenized pHU1 abolished Hup activity in free-living bacteria but not in nodules.

Rapid Colony Screening Method for Identifying Hydrogenase Activity in Rhizobium japonicum

A method has been developed for the rapid screening of Rhizobium japonicum colonies for hydrogenase activity based on their ability to reduce methylene blue in the presence of respiratory inhibitors and hydrogen. Hydrogen uptake-positive (Hup) colonies derepressed for hydrogenase activity were visualized by their localized decolorization of filter paper disks impregnated with the dye. Appropriate responses were seen with a number of Hup and Hup wild-type strains of R. japonicum as well as Hup mutants. Its specificity was further confirmed in selected strains on the basis of comparisons with chemolithotrophic growth and the presence of other genetic markers. Utilization of the method in identifying Hup colonies among 16,000 merodiploid derivatives of the Hup mutant strain PJ17nal containing cloned DNA fragments of the Hup strain 122 DES has demonstrated its applicability as a screening procedure in the genetic analysis of the R. japonicum hydrogen uptake system.

Single and combined effects of nickel (Ni(II)) and cobalt (Co(II)) ions on activated sludge and on other aerobic microorganisms: a review

Nickel (N(II)) and cobalt (Co(II)) are often encountered in wastewaters. As conventional wastewater treatment may only partially remove nickel and cobalt, a large fraction of the above metals is released to the aquatic environment. Both metals have been identified as micronutrients, at trace concentrations; however, they are both microbial growth inhibitors, at relatively high concentrations. On the other hand, the combined effects (e.g.: growth stimulation or toxicity) of the above metals have been found to differ from the summation of the effects which occur when the metals are applied individually. Moreover, a number of environmental factors (e.g.: pH, biomedium composition, biomass concentration, presence of other heavy metals) can affect the microbial toxicity of the above metallic species. The present review discusses, in a systematic way, the individual and joint effects of the above heavy metals to the growth of microorganisms grown under aerobic conditions, with focus on the growth of activated sludge. Data on multi-metal toxicity are particularly useful in establishing criteria for heavy metal tolerance levels in the environment.

Kinetic studies on autohydrogenotrophic growth of Ralstonia eutropha with nitrate as terminal electron acceptor

Autohydrogenotrophic batch growth of Ralstonia eutropha H16 was studied in a stirred-tank reactor with nitrate and nitrite as terminal electron acceptors and the sole limiting substrates. Assuming product inhibition by nitrite, saturation kinetics with the two limiting substrates and a simple switching function, which allows growth on nitrite only at low nitrate concentrations, resulted in a kinetic growth model with nine model parameters. The data of two batch experiments were used to identify the kinetic model. The kinetic model was validated with two additional batch experiments. The model predictions are in very good agreement with the experimental data. The maximum nitrite concentration was estimated to be 30.7 mM (total inhibition of growth). After complete reduction of nitrate, the growth rate decreases almost to zero before it increases again because of the following nitrite respiration. The maximum autohydrogenotrophic growth rate of Ralstonia eutropha with nitrate as a final electron acceptor (0.509 d(-1)) was found to be reduced by 90-95% compared to the so far reported autohydrogenotrophic growth rates with oxygen.

Cloning and sequence analysis of the poly (3-hydroxyalkanoic acid)-synthesis genes of Pseudomonas acidophila

Pseudomonas acidophila can grow with CO2 as a sole carbon source by the possession of a recombinant plasmid that clones genes that confer chemolithoautotrophic growth ability derived from the H2-oxidizing bacterium Alcaligenes hydrogenophilus. H2-oxidizing bacteria produce poly(3-hydroxybutyric acid) (PHB) from CO2, but recombinant P. acidophila can produce the more useful biopolymer poly(3-hydroxyalkanoic acid) (PHA). In this study, the pha genes of P. acidophila were cloned and a sequence analysis was carried out. A gene library was constructed using the cosmid vector pVK102. A recombinant cosmid carrying the pha genes was selected by the complementation of a PHB-negative mutant of Alcaligenes eutrophus H16. The resulting recombinant cosmid pIK7 contained a 14.8-kb DNA insert. Subcloning was done. and the recombinant plasmid pEH74 was selected by hybridization with the A. eutrophus H16 pha genes. Escherichia coli possessing pEH74 produced PHB, indicating that pEH74 contained the pha genes of P. acidophila. The nucleotide sequences of the PHA-synthesis genes phaA (beta-ketothiolase), phaB (acetoacetyl-CoA reductase), and phaC (PHA synthase) in pEH74 were determined. The homologies of phaA, phaB, and phaC between P. acidophila and A. eutrophus H16 were 64.7, 76.1 and 56.6%, respectively.

Production of poly(hydroxyalkanoic acid)

Poly(hydroxyalkanoic acid) [PHA] is accumulated by numerous microorganisms as an energy reserve material under unbalanced growth conditions in the presence of excess carbon source. In spite of being a good candidate for biodegradable thermoplastics, their high price compared with conventional plastics currently in use has limited their availability in a wide range of applications. With the aim of reducing the high production cost of PHA, much effort is currently being devoted to improve productivity by employing various microorganisms and by developing efficient culture techniques. Several processes recently developed and employed for the production of PHA by various bacteria are described.

Selenium increases hydrogenase expression in autotrophically cultured Bradyrhizobium japonicum and is a constituent of the purified enzyme

We have investigated the effect of added selenite on autotrophic growth and the time course of hydrogen oxidation derepression in Bradyrhizobium japonicum 122DES cultured in a medium purified to remove selenium compounds. In addition, hydrogenase was purified to near homogeneity and examined for the specific incorporation of Se into the enzyme. The addition of Se at 0.1 microM significantly increased total cell protein and hydrogenase specific activity of harvested cells. Also, the addition of SeO3(2-) enhanced the time course of hydrogenase derepression by 133%, whereas VO3, AsO2(2-), SO2(2-), and TeO3(2-) failed to substantially affect hydrogenase derepression. During the final chromatographic purification of hydrogenase, a striking coincidence in peaks of protein content, Se radioactivity, and hydrogenase activity of fractions was obtained. The total Se content expressed per milligram of protein increased manyfold during the purification procedure. The mean Se content of the purified hydrogenase was 0.56 +/- 0.13 mol of Se per mol of enzyme. These results indicate that Se is an important element in the H2 metabolism of B. japonicum and that hydrogenase from B. japonicum is a seleno protein.

Construction and use of a gene bank of Alcaligenes eutrophus in the analysis of ribulose bisphosphate carboxylase genes

A gene bank of the DNA from the hydrogen bacterium Alcaligenes eutrophus ATCC 17707 was constructed in the broad host range cosmid vector pVK102 and established in Escherichia coli. A triparental replica plating procedure was developed to allow rapid screening of large numbers of isolated E. coli gene bank clones for complementation of A. eutrophus mutants. This procedure was used to identify hybrid cosmids that complemented CO2 fixation-negative (Cfx-), H2 uptake-negative (Hup-), and auxotrophic A. eutrophus mutants. The average insert DNA size in these hybrid cosmids was 22 kilobases. Nine hybrid cosmids that complemented ribulose bisphosphate carboxylase-negative (RuBPCase-) mutants were characterized. They fell into two distinct groups with respect to their restriction patterns. Complementing subclones from the two groups contained no common restriction fragments, but hybridization experiments indicated a high degree of sequence homology. Restriction fragments corresponding to one of the subclones were absent in total DNA from a cured strain that had lost plasmid pAE7, indigenous to the wild type. It is concluded that functional CO2 fixation genes in the A. eutrophus ATCC 17707 chromosome are reiterated on plasmid pAE7.

Some properties of the nickel-containing hydrogenase of chemolithotrophically grown Rhizobium japonicum

The uptake hydrogenase of chemolithotrophically grown Rhizobium japonicum was purified to apparent homogeneity with a final specific activity of 69 mumol of H2 oxidized per min per mg of protein. The procedure included Triton extraction of broken membranes and DEAE-cellulose and Sephacryl S-200 chromatographies. The purified protein contained two polypeptides separable only by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. They comigrated on native polyacrylamide gels and sucrose density gradients. The molecular weights were ca. 60,000 and 30,000. Densitometric scans of the sodium dodecyl sulfate gels indicated a molar ratio of 1.03 +/- 0.03. Antiserum was developed against the 60-kilodalton polypeptide for use in hydrogenase detection by an enzyme-linked immunosorbent assay. The antiserum did not cross-react with the 30-kilodalton polypeptide. Native gel electrophoresis of Triton-extracted cells grown in the presence of 63Ni showed comigration of the hydrogenase and radioactive Ni.

Dense Crithidia growth and heme sparing: relation to Fe, Cu, Mo chelation

SYNOPSIS. Heme, intrinsically required by Trypanosomatidae, is unstable, especially in conventional alkaline (pH 7.2–8.0) media. Low solubility of heme in a pH 6.5 basal medium (developed to assay biopterin with Crithidia fasciculata) posed a problem: in media acidified during growth because of glycolysis, heme precipitated, perhaps contributed to acid‐limited growth and interfered with densitometric estimation of growth. The remedy was to: replace glucose with less rapidly metabolized mannitol; distribute media in thin layers to promote oxidation of acetate, fumarate, and malate (presumably leaving an alkaline residue); and buffer heavily with histidine + Good zwitterionic buffers, and superimpcse physiological buffering by arginine + asparagine whose catabolism appeared to yield an excess of NH+4 over acid. Thereupon, Fe and Cu deficiencies sharply limited growth in the medium whose main chelators were: (a) 2,3–dihydroxybenzoic + 5‐sulfosalicylic acids (which preferentially bind transitional elements at their higher valences; (b) malic and gluconic acids; and (c) histidine. With unconventionally heightened concentrations of Fe, Cu, and Mo (the latter serving as Cu buffer as well as nutrient per se), the hemin concentration could be lowered, widening the margin of safety for heme solubility. Growth then reached 1.4 × 108 cell/ml. This medium may serve to screen for ligands promoting uptake or release of Fe and Cu. The increased growth is a step towards improving the assay medium for biopterin and practical use of Crithidia to assay several B vitamins and essential amino acids for metazoa.

Quantitative requirements for exponential growth of Alcaligenes eutrophus

Quantitative nutrient requirements for unrestricted autotrophic growth of Alcaligenes eutrophus were determined. Minimum saturating concentrations of Mg2+, SO42-, PO43-, Fe3+, and Na2+ for an optical density increase of 2 were 10(-4) M 8 X10(-5) M, 5 X 10(-4) to 6 X 10(-4) M, 10(-5) M, and 10(-7) to 2 X 10(-7) M, respectively. Trace metal requirements for cobalt, chromium, and copper were also demonstrated, but minimum concentrations could not be determined because other reagents contributed a high background of these metals. Under certain conditions an apparent response to zinc was observed, although other experiments suggest the zinc salt contained another metal that was required for growth. Poly-beta-hydroxybutyrate biosynthesis was shown to be initiated by a magnesium or sulfate deficiency as well as by a nitrogen or phosphate deficiency.