Cloning, sequence analysis, and expression in Escherichia coli of a gene coding for a beta-mannanase from the extremely thermophilic bacterium "Caldocellum saccharolyticum"

Thermophilic β-mannanases from bacteria: production, resources, structural features and bioengineering strategies

β-mannanases are pivotal enzymes that cleave the mannan backbone to release short chain mannooligosaccharides, which have tremendous biotechnological applications including food/feed, prebiotics and biofuel production. Due to the high temperature conditions in many industrial applications, thermophilic mannanases seem to have great potential to overcome the thermal impediments. Thus, structural analysis of thermostable β-mannanases is extremely important, as it could open up new avenues for genetic engineering, and protein engineering of these enzymes with enhanced properties and catalytic efficiencies. Under this scope, the present review provides a state-of-the-art discussion on the thermophilic β-mannanases from bacterial origin, their production, engineering and structural characterization. It covers broad insights into various molecular biology techniques such as gene mutagenesis, heterologous gene expression, and protein engineering, that are employed to improve the catalytic efficiency and thermostability of bacterial mannanases for potential industrial applications. Further, the bottlenecks associated with mannanase production and process optimization are also discussed. Finally, future research related to bioengineering of mannanases with novel protein expression systems for commercial applications are also elaborated.

Expression, Characterization and Structure Analysis of a New GH26 Endo-β-1, 4-Mannanase (Man26E) from Enterobacter aerogenes B19

β-mannanase is one of the key enzymes to hydrolyze hemicellulose. At present, most β-mannanases are not widely applied because of their low enzyme activity and unsuitable enzymatic properties. In this work, a new β-mannanase from Enterobacter aerogenes was studied, which laid the foundation for its further application. Additionally, we will further perform directed evolution of the enzyme to increase its activity, improve its temperature and pH properties to allow it more applications in industry. A new β-mannanase (Man26E) from Enterobacter aerogenes was successfully expressed in Escherichia coli. Man26E showed about 40 kDa on SDS-PAGE gel. The SWISS-MODEL program was used to model the tertiary structure of Man26E, which presented a core (α/β)8-barrel catalytic module. Based on the binding pattern of CjMan26 C, Man26E docking Gal1Man4 was investigated. The catalytic region consisted of a surface containing four solvent-exposed aromatic rings, many hydrophilic and charged residues. Man26E displayed the highest activity at pH 6.0 and 55 °C, and high acid and alkali stability in a wide pH range (pH 4–10) and thermostability from 40 to 50 °C. The enzyme showed the highest activity on locust bean gum, and the Km and Vmax were 7.16 mg mL−1 and 508 U mg−1, respectively. This is the second β-mannanase reported from Enterobacter aerogenes B19. The β-mannanase displayed high enzyme activity, a relatively high catalytic temperature and a broad range of catalytic pH values. The enzyme catalyzed both polysaccharides and manno-oligosaccharides.

Insights into Thermophilic Plant Biomass Hydrolysis from Caldicellulosiruptor Systems Biology

Plant polysaccharides continue to serve as a promising feedstock for bioproduct fermentation. However, the recalcitrant nature of plant biomass requires certain key enzymes, including cellobiohydrolases, for efficient solubilization of polysaccharides. Thermostable carbohydrate-active enzymes are sought for their stability and tolerance to other process parameters. Plant biomass degrading microbes found in biotopes like geothermally heated water sources, compost piles, and thermophilic digesters are a common source of thermostable enzymes. While traditional thermophilic enzyme discovery first focused on microbe isolation followed by functional characterization, metagenomic sequences are negating the initial need for species isolation. Here, we summarize the current state of knowledge about the extremely thermophilic genus Caldicellulosiruptor, including genomic and metagenomic analyses in addition to recent breakthroughs in enzymology and genetic manipulation of the genus. Ten years after completing the first Caldicellulosiruptor genome sequence, the tools required for systems biology of this non-model environmental microorganism are in place.

Genome Wide Re-Annotation of Caldicellulosiruptor saccharolyticus with New Insights into Genes Involved in Biomass Degradation and Hydrogen Production

Caldicellulosiruptor saccharolyticus has proven itself to be an excellent candidate for biological hydrogen (H₂) production, but still it has major drawbacks like sensitivity to high osmotic pressure and low volumetric H₂ productivity, which should be considered before it can be used industrially. A whole genome re-annotation work has been carried out as an attempt to update the incomplete genome information that causes gap in the knowledge especially in the area of metabolic engineering, to improve the H₂ producing capabilities of C. saccharolyticus. Whole genome re-annotation was performed through manual means for 2,682 Coding Sequences (CDSs). Bioinformatics tools based on sequence similarity, motif search, phylogenetic analysis and fold recognition were employed for re-annotation. Our methodology could successfully add functions for 409 hypothetical proteins (HPs), 46 proteins previously annotated as putative and assigned more accurate functions for the known protein sequences. Homology based gene annotation has been used as a standard method for assigning function to novel proteins, but over the past few years many non-homology based methods such as genomic context approaches for protein function prediction have been developed. Using non-homology based functional prediction methods, we were able to assign cellular processes or physical complexes for 249 hypothetical sequences. Our re-annotation pipeline highlights the addition of 231 new CDSs generated from MicroScope Platform, to the original genome with functional prediction for 49 of them. The re-annotation of HPs and new CDSs is stored in the relational database that is available on the MicroScope web-based platform. In parallel, a comparative genome analyses were performed among the members of genus Caldicellulosiruptor to understand the function and evolutionary processes. Further, with results from integrated re-annotation studies (homology and genomic context approach), we strongly suggest that Csac_0437 and Csac_0424 encode for glycoside hydrolases (GH) and are proposed to be involved in the decomposition of recalcitrant plant polysaccharides. Similarly, HPs: Csac_0732, Csac_1862, Csac_1294 and Csac_0668 are suggested to play a significant role in biohydrogen production. Function prediction of these HPs by using our integrated approach will considerably enhance the interpretation of large-scale experiments targeting this industrially important organism.

Performance of a new thermostable mannanase in breaking guar-based fracturing fluids at high temperatures with little premature degradation

A new thermostable β-1,4-mannanase (DtManB) cloned from Dictyoglomus thermophilum CGMCC 7283 showed the maximum activity towards hydroxypropyl guar gum at 80 °C, with a half-life of 46 h. DtManB exhibited good compatibility with various additives of fracturing fluid, retaining more than 50 % activity in all the cases tested. More importantly, premature degradation could be alleviated significantly when using DtManB as breaker, because at 27 and 50 °C it displayed merely 3.7 and 18.5 % activities compared to those at 80 °C. In a static test, 0.48 mg DtManB could break 200 mL borax cross-linked fracturing fluid dramatically at 80 °C, and merely 18 mPa s of the viscosity was detected even after the broken fluid was cooled down and only 161.4 mg L(-1) of the residue was left after the enzymatic reaction. All these positive features demonstrate the great potential of this mannanase as a new enzyme breaker for application in enhanced recovery of petroleum oil.

Biohydrogen Production by the Thermophilic Bacterium Caldicellulosiruptor saccharolyticus: Current Status and Perspectives

Caldicellulosiruptor saccharolyticus is one of the most thermophilic cellulolytic organisms known to date. This Gram-positive anaerobic bacterium ferments a broad spectrum of mono-, di- and polysaccharides to mainly acetate, CO₂ and hydrogen. With hydrogen yields approaching the theoretical limit for dark fermentation of 4 mol hydrogen per mol hexose, this organism has proven itself to be an excellent candidate for biological hydrogen production. This review provides an overview of the research on C. saccharolyticus with respect to the hydrolytic capability, sugar metabolism, hydrogen formation, mechanisms involved in hydrogen inhibition, and the regulation of the redox and carbon metabolism. Analysis of currently available fermentation data reveal decreased hydrogen yields under non-ideal cultivation conditions, which are mainly associated with the accumulation of hydrogen in the liquid phase. Thermodynamic considerations concerning the reactions involved in hydrogen formation are discussed with respect to the dissolved hydrogen concentration. Novel cultivation data demonstrate the sensitivity of C. saccharolyticus to increased hydrogen levels regarding substrate load and nitrogen limitation. In addition, special attention is given to the rhamnose metabolism, which represents an unusual type of redox balancing. Finally, several approaches are suggested to improve biohydrogen production by C. saccharolyticus.

Use of label-free quantitative proteomics to distinguish the secreted cellulolytic systems of Caldicellulosiruptor bescii and Caldicellulosiruptor obsidiansis

The extremely thermophilic, Gram-positive bacteria Caldicellulosiruptor bescii and Caldicellulosiruptor obsidiansis efficiently degrade both cellulose and hemicellulose, which makes them relevant models for lignocellulosic biomass deconstruction to produce sustainable biofuels. To identify the shared and unique features of secreted cellulolytic apparatuses from C. bescii and C. obsidiansis, label-free quantitative proteomics was used to analyze protein abundance over the course of fermentative growth on crystalline cellulose. Both organisms' secretomes consisted of more than 400 proteins, of which the most abundant were multidomain glycosidases, extracellular solute-binding proteins, flagellin, putative pectate lyases, and uncharacterized proteins with predicted secretion signals. Among the identified proteins, 53 to 57 significantly changed in abundance during cellulose fermentation in favor of glycosidases and extracellular binding proteins. Mass spectrometric characterizations, together with cellulase activity measurements, revealed a substantial abundance increase of a few bifunctional multidomain glycosidases composed of glycosidase (GH) domain family 5, 9, 10, 44, or 48 and family 3 carbohydrate binding (CBM3) modules. In addition to their orthologous cellulases, the organisms expressed unique glycosidases with different domain organizations: C. obsidiansis expressed the COB47_1671 protein with GH10/5 domains, while C. bescii expressed the Athe_1857 (GH10/48) and Athe_1859 (GH5/44) proteins. Glycosidases containing CBM3 domains were selectively enriched via binding to amorphous cellulose. Preparations from both bacteria contained highly thermostable enzymes with optimal cellulase activities at 85°C and pH 5. The C. obsidiansis preparation, however, had higher cellulase specific activity and greater thermostability. The C. bescii culture produced more extracellular protein and additional SDS-PAGE bands that demonstrated glycosidase activity.

Insights into plant biomass conversion from the genome of the anaerobic thermophilic bacterium Caldicellulosiruptor bescii DSM 6725

Caldicellulosiruptor bescii DSM 6725 utilizes various polysaccharides and grows efficiently on untreated high-lignin grasses and hardwood at an optimum temperature of ∼80°C. It is a promising anaerobic bacterium for studying high-temperature biomass conversion. Its genome contains 2666 protein-coding sequences organized into 1209 operons. Expression of 2196 genes (83%) was confirmed experimentally. At least 322 genes appear to have been obtained by lateral gene transfer (LGT). Putative functions were assigned to 364 conserved/hypothetical protein (C/HP) genes. The genome contains 171 and 88 genes related to carbohydrate transport and utilization, respectively. Growth on cellulose led to the up-regulation of 32 carbohydrate-active (CAZy), 61 sugar transport, 25 transcription factor and 234 C/HP genes. Some C/HPs were overproduced on cellulose or xylan, suggesting their involvement in polysaccharide conversion. A unique feature of the genome is enrichment with genes encoding multi-modular, multi-functional CAZy proteins organized into one large cluster, the products of which are proposed to act synergistically on different components of plant cell walls and to aid the ability of C. bescii to convert plant biomass. The high duplication of CAZy domains coupled with the ability to acquire foreign genes by LGT may have allowed the bacterium to rapidly adapt to changing plant biomass-rich environments.

Efficient recombinant expression and secretion of a thermostable GH26 mannan endo-1,4-beta-mannosidase from Bacillus licheniformis in Escherichia coli

Background

Mannans are one of the key polymers in hemicellulose, a major component of lignocellulose. The Mannan endo-1,4-β-mannosidase or 1,4-β-D-mannanase (EC 3.2.1.78), commonly named β-mannanase, is an enzyme that can catalyze random hydrolysis of β-1,4-mannosidic linkages in the main chain of mannans, glucomannans and galactomannans. The enzyme has found a number of applications in different industries, including food, feed, pharmaceutical, pulp/paper industries, as well as gas well stimulation and pretreatment of lignocellulosic biomass for the production of second generation biofuel. Bacillus licheniformis is a Gram-positive endospore-forming microorganism that is generally non-pathogenic and has been used extensively for large-scale industrial production of various enzymes; however, there has been no previous report on the cloning and expression of mannan endo-1,4-β-mannosidase gene (manB) from B. licheniformis.

Results

The mannan endo-1,4-β-mannosidase gene (manB), commonly known as β-mannanase, from Bacillus licheniformis strain DSM13 was cloned and overexpressed in Escherichia coli. The enzyme can be harvested from the cell lysate, periplasmic extract, or culture supernatant when using the pFLAG expression system. A total activity of approximately 50,000 units could be obtained from 1-l shake flask cultures. The recombinant enzyme was 6 × His-tagged at its C-terminus, and could be purified by one-step immobilized metal affinity chromatography (IMAC) to apparent homogeneity. The specific activity of the purified enzyme when using locust bean gum as substrate was 1672 ± 96 units/mg. The optimal pH of the enzyme was between pH 6.0 - 7.0; whereas the optimal temperature was at 50 - 60°C. The recombinant β-mannanase was stable within pH 5 - 12 after incubation for 30 min at 50°C, and within pH 6 - 9 after incubation at 50°C for 24 h. The enzyme was stable at temperatures up to 50°C with a half-life time of activity (τ1/2) of approximately 80 h at 50°C and pH 6.0. Analysis of hydrolytic products by thin layer chromatography revealed that the main products from the bioconversion of locus bean gum and mannan were various manno-oligosaccharide products (M2 - M6) and mannose.

Conclusion

Our study demonstrates an efficient expression and secretion system for the production of a relatively thermo- and alkali-stable recombinant β-mannanase from B. licheniformis strain DSM13, suitable for various biotechnological applications.

Cloning, expression in Pichia pastoris, and characterization of a thermostable GH5 mannan endo-1,4-beta-mannosidase from Aspergillus niger BK01

BACKGROUND

Mannans are key components of lignocellulose present in the hemicellulosic fraction of plant primary cell walls. Mannan endo-1,4-beta-mannosidases (1,4-beta-D-mannanases) catalyze the random hydrolysis of beta-1,4-mannosidic linkages in the main chain of beta-mannans. Biodegradation of beta-mannans by the action of thermostable mannan endo-1,4-beta-mannosidase offers significant technical advantages in biotechnological industrial applications, i.e. delignification of kraft pulps or the pretreatment of lignocellulosic biomass rich in mannan for the production of second generation biofuels, as well as for applications in oil and gas well stimulation, extraction of vegetable oils and coffee beans, and the production of value-added products such as prebiotic manno-oligosaccharides (MOS).

RESULTS

A gene encoding mannan endo-1,4-beta-mannosidase or 1,4-beta-D-mannan mannanohydrolase (E.C. 3.2.1.78), commonly termed beta-mannanase, from Aspergillus niger BK01, which belongs to glycosyl hydrolase family 5 (GH5), was cloned and successfully expressed heterologously (up to 243 microg of active recombinant protein per mL) in Pichia pastoris. The enzyme was secreted by P. pastoris and could be collected from the culture supernatant. The purified enzyme appeared glycosylated as a single band on SDS-PAGE with a molecular mass of approximately 53 kDa. The recombinant beta-mannanase is highly thermostable with a half-life time of approximately 56 h at 70 degrees C and pH 4.0. The optimal temperature (10-min assay) and pH value for activity are 80 degrees C and pH 4.5, respectively. The enzyme is not only active towards structurally different mannans but also exhibits low activity towards birchwood xylan. Apparent Km values of the enzyme for konjac glucomannan (low viscosity), locust bean gum galactomannan, carob galactomannan (low viscosity), and 1,4-beta-D-mannan (from carob) are 0.6 mg mL-1, 2.0 mg mL-1, 2.2 mg mL-1 and 1.5 mg mL-1, respectively, while the kcat values for these substrates are 215 s-1, 330 s-1, 292 s-1 and 148 s-1, respectively. Judged from the specificity constants kcat/Km, glucomannan is the preferred substrate of the A. niger beta -mannanase. Analysis by thin layer chromatography showed that the main product from enzymatic hydrolysis of locust bean gum is mannobiose, with only low amounts of mannotriose and higher manno-oligosaccharides formed.

CONCLUSION

This study is the first report on the cloning and expression of a thermostable mannan endo-1,4-beta-mannosidase from A. niger in Pichia pastoris. The efficient expression and ease of purification will significantly decrease the production costs of this enzyme. Taking advantage of its acidic pH optimum and high thermostability, this recombinant beta-mannanase will be valuable in various biotechnological applications.

Production of galacto-manno-oligosaccharides from guar gum by beta-mannanase from Penicillium oxalicum SO

Beta-mannanase from Penicillium oxalicum SO efficiently hydrolyzed guar galactomannan to galacto-manno-oligosaccharides. Gel filtration estimated the molecular weight of the beta-mannanase as 35 000 and SDS-PAGE as 29 000. The optimum pH was around 5 while a stable pH was reached in the range of 3-6. Optimum temperature was around 60 degrees C at pH 5, while under 60 degrees C activity was stable. HPLC analysis detected oligosaccharides with degrees of polymerization (DP) of 2 to 7 and 2 to 6 released on hydrolysis of guar and locust bean gums, respectively; about 92% of the released sugars were oligosaccharides. In analysis of the sugar distribution on MALDI-TOF-MS, major products of DP 6 and 7 and DP 5 and 6 were confirmed in hydrolysates of guar gum and locust bean gum, respectively. One of the main oligosaccharides released from guar gum, with DP 7, had a high galactose content (Gal/Man = 0.76) and corresponded to a blockwise galactose-substituted mannan type in galactomannan.

Expression of the Aspergillus aculeatus endo-beta-1,4-mannanase encoding gene (man1) in Saccharomyces cerevisiae and characterization of the recombinant enzyme

The endo-beta-1,4-mannanase encoding gene man1 of Aspergillus aculeatus MRC11624 was amplified from mRNA by polymerase chain reaction using sequence-specific primers designed from the published sequence of man1 from A. aculeatus KSM510. The amplified fragment was cloned and expressed in Saccharomyces cerevisiae under the gene regulation of the alcohol dehydrogenase (ADH2(PT)) and phosphoglycerate kinase (PGK1(PT)) promoters and terminators, respectively. The man1 gene product was designated Man5A. Subsequently, the FUR1 gene of the recombinant yeast strains was disrupted to create autoselective strains: S. cerevisiae Man5ADH2 and S. cerevisiae Man5PGK1. The strains secreted 521 nkat/ml and 379 nkat/ml of active Man5A after 96 h of growth in a complex medium. These levels were equivalent to 118 and 86 mg/l of Man5A protein produced, respectively. The properties of the native and recombinant Man5A were investigated and found to be similar. The apparent molecular mass of the recombinant enzyme was 50 kDa compared to 45 kDa of the native enzyme due to glycosylation. The determined K(m) and V(max) values were 0.3 mg/ml and 82 micromol/min/mg for the recombinant and 0.15 mg/ml and 180 micromol/min/mg for the native Man5A, respectively. The maximum pH and thermal stability were observed within the range of pH 4-6 and 50 degrees C and below. The pH and temperature optima and stability were relatively similar for recombinant and native Man5A. Hydrolysis of an unbranched beta-1,4-linked mannan polymer released mannose, mannobiose, and mannotriose as the main products.

Molecular cloning, sequencing, and expression of a novel multidomain mannanase gene from Thermoanaerobacterium polysaccharolyticum

The manA gene of Thermoanaerobacterium polysaccharolyticum was cloned in Escherichia coli. The open reading frame of manA is composed of 3,291 bases and codes for a preprotein of 1,097 amino acids with an estimated molecular mass of 119,627 Da. The start codon is preceded by a strong putative ribosome binding site (TAAGGCGGTG) and a putative -35 (TTCGC) and -10 (TAAAAT) promoter sequence. The ManA of T. polysaccharolyticum is a modular protein. Sequence comparison and biochemical analyses demonstrate the presence of an N-terminal leader peptide, and three other domains in the following order: a putative mannanase-cellulase catalytic domain, cellulose binding domains 1 (CBD1) and CBD2, and a surface-layer-like protein region (SLH-1, SLH-2, and SLH-3). The CBD domains show no sequence homology to any cellulose binding domain yet reported, hence suggesting a novel CBD. The duplicated CBDs, which lack a disulfide bridge, exhibit 69% identity, and their deletion resulted in both failure to bind to cellulose and an apparent loss of carboxymethyl cellulase and mannanase activities. At the C-terminal region of the gene are three repeats of 59, 67, and 56 amino acids which are homologous to conserved sequences found in the S-layer-associated regions within the xylanases and cellulases of thermophilic members of the Bacillus-Clostridium cluster. The ManA of T. polysaccharolyticum, besides being an extremely active enzyme, is the only mannanase gene cloned which shows this domain structure.

Gene cloning, DNA sequencing, and expression of thermostable beta-mannanase from Bacillus stearothermophilus

A DNA genomic library constructed from Bacillus stearothermophilus, a gram-positive, facultative thermophilic aerobe that secretes a thermostable beta-mannanase, was screened for mannan hydrolytic activity. Recombinant beta-mannanase activity was detected on the basis of the clearing of halos around Escherichia coli colonies grown on a dye-labelled substrate, Remazol brilliant blue-locust bean gum. The nucleotide sequence of the mannanase gene, manF, corresponded to an open reading frame of 2,085 bp that codes for a 32-amino-acid signal peptide and a mature protein with a molecular mass of 76,089 Da. From sequence analysis, ManF belongs to glycosyl hydrolase family 5 and exhibits higher similarity to eukaryotic than to bacterial mannanases. The manF coding sequence was subcloned into the pH6EX3 expression plasmid and expressed in E. coli as a recombinant fusion protein containing a hexahistidine N-terminal sequence. The fusion protein has thermostability similar to the native enzyme and was purified by Ni2+ affinity chromatography. The values for the kinetic parameters Vmax and Km were 384 U/mg and 2.4 mg/ml, respectively, for the recombinant mannanase and were comparable to those of the native enzyme.

Properties of exgS, a gene for a major subunit of the Clostridium cellulovorans cellulosome

The nucleotide sequence of P70, one of the three major subunits of the Clostridium cellulovorans cellulosome, has been determined. The gene designated as exgS (Genbank Accession No. U34793) consists of 2112 bp and encodes a protein containing 703 amino acids with a molecular mass of 77.7 kDa. ExgS has a putative signal peptide sequence of 32 amino acids. The N-terminal region is separated from the C-terminal region by a short-Pro-Thr-Pro linker. The C-terminal region of ExgS contains a duplicated sequence (DS), each sequence consisting of 22 amino acids. exgS, located 67 bp downstream of cbpA in the chromosome, is immediately upstream of a gene encoding a family 9 type endoglucanase that we have designated as EngH. This gene cluster to date consists of regA-cbpA-exgS-engH. Recombinant ExgS (rExgS) containing no signal peptide was expressed in E. coli. The rExgS actively digested several forms of cellulose, including Avicel, Sigmacell101, crystalline cellulose, and xylan, but not carboxymethyl cellulose (CMC). Cellotetraose was the smallest oligosaccharide substrate for rExgS. The enzymatic studies indicated that ExgS was an exoglucanase and had some properties similar to that of CelS from C. thermocellum and CelF from C.cellulolyticum. An exoglucanase has now been found to be a component of the C. cellulovorans cellulosome as well as the previously reported endoglucanases.

Exploring the cellulose/xylan specificity of the beta-1,4-glycanase cex from Cellulomonas fimi through crystallography and mutation

The retaining beta-1,4-glycanase Cex from Cellulomonas fimi, a family 10 glycosyl hydrolase, hydrolyzes xylan 40-fold more efficiently than cellulose. To gain insight into the nature of its preference for xylan, we determined the crystal structure of the Cex catalytic domain (Cex-cd) trapped as its covalent 2-deoxy-2-fluoroxylobiosyl-enzyme intermediate to 1.9 A resolution. Together with the crystal structure of unliganded Cex-cd [White, A., et al. (1994) Biochemistry 33, 12546-12552] and the previously determined crystal structure of the covalent 2-deoxy-2-fluorocellobiosyl-Cex-cd intermediate [White, A., et al. (1996) Nat. Struct. Biol. 3, 149-154], this structure provides a convincing rationale for the observed substrate specificity in Cex. Two active site residues, Gln87 and Trp281, are found to sterically hinder the binding of glucosides and must rearrange to accommodate these substrates. Such rearrangements are not necessary for the binding of xylobiosides. The importance of this observation was tested by examining the catalytic behavior of the enzyme with Gln87 mutated to Met. This mutation had no measurable effect on substrate affinity or turnover number relative to the wild type enzyme, indicating that the Met side chain could accommodate the glucoside moiety as effectively as the wild type Gln residue. Subsequent mutagenesis studies will address the role of entropic versus enthalpic contributions to binding by introducing side chains that might be more rigid in the unliganded enzyme.

Cloning, sequence analysis, and expression in Escherichia coli of a gene coding for an enzyme from Bacillus circulans K-1 that degrades guar gum

A 2,048-bp nucleotide sequence containing a gene coding for an enzyme that degraded guar gum from Bacillus circulans K-1 was identified by polymerase chain reaction walking. This G-gene consisted of 1,551 nucleotides coding for a protein with Mr 55,242. The enzyme was overexpressed in Escherichia coli JM109 cells by the cloning the G-gene downstream of the lac Z promoter of pUC19. The molecular mass of recombinant G-enzyme estimated by SDS-PAGE was 62 KDa, close to that from strain K-1. Analysis of the recombinant enzyme showed GalNAc, Xyl, GlcNAc, Man, Glc, and Gal to account for 1.7%, 14.4%, 6.1%, 3.2%, 54.2%, and 10.4%, respectively, of the total monosaccharides. Polyacrylamide gel electrophoresis of this enzyme with staining gave a red band. The results suggested that the sugars accounted for the differences in the molecular masses. The recombinant enzyme had two kinds of N-terminal sequences, Thr-Met-Ile-Thr-Pro-Ser-Phe-Ala-Ser-Gly-Phe-Tyr-Val-Ile and Ile-Thr-Pro-Ser-Phe-Ala-Ser-Gly-Phe-Tyr-Val-Ile-Gly-Thr. Comparison of these sequences with the deduced N-terminal sequence coded for the G-gene showed that the amino acid, first Met, of the lac Z gene or the next residues Thr-Met in the recombinant enzyme were absent in the native enzyme. Methionines near and at the N-terminus of the mature protein probably were digested by methionine aminopeptidases of E. coli after translation. The properties of recombinant G-enzyme were similar to those of the enzyme from K-1 cells.

Molecular cloning and characterization of a recombinant Histoplasma capsulatum antigen for antibody-based diagnosis of human histoplasmosis

Immunological cross-reactivity among fungi has hampered the development of specific serodiagnostic assays for histoplasmosis. We report the molecular cloning and characterization of a Histoplasma capsulatum cDNA (GH17) that encodes an antigen with immunodiagnostic potential. GH17 is an 810-bp cDNA which encodes a protein of 211 amino acid residues. The GH17 sequence has almost no significant homology with other sequences in GenBank. Southern blot analysis suggests that GH17 is confined to a single location in the genomic DNA of H. capsulatum. Immunoblots indicated that the protein product of GH17 (expressed as a 140-kDa beta-galactosidase fusion protein) was recognized by antibodies in 18 of 18 sera from histoplasmosis patients, but not by antibodies in sera from patients or animals infected with other fungi. GH17 was expressed in a prokaryotic expression vector, pPROEX-1, and recombinant protein was purified by preparative electrophoresis. Antibodies raised to this protein bound to a 60-kDa native antigen in immunoblots of H. capsulatum yeast antigen extract. These results suggest that GH17 encodes an H. capsulatum antigen that may be useful for the diagnosis of histoplasmosis in humans.

Purification and characterization of extremely thermostable beta-mannanase, beta-mannosidase, and alpha-galactosidase from the hyperthermophilic eubacterium Thermotoga neapolitana 5068

Thermostable and thermoactive beta-mannanase (1,4-beta-D-mannan mannanohydrolase [EC 3.2.1.78]), beta-mannosidase (beta-D-mannopyranoside hydrolase [EC 3.2.1.25]) and alpha-galactosidase (alpha-D-galactoside galactohydrolase [EC 3.2.1.22]) were purified to homogeneity from cell extracts and extracellular culture supernatants of the hyperthermophilic eubacterium Thermotoga neapolitana 5068 grown on guar gum-based media. The beta-mannanase was an extracellular monomeric enzyme with a molecular mass of 65 kDa. The optimal temperature for activity was 90 to 92 degrees C, with half-lives (t1/2) of 34 h at 85 degrees C, 13 h at 90 degrees C, and 35 min at 100 degrees C. The beta-mannosidase and alpha-galactosidase were found primarily in cell extracts. The beta-mannosidase was a homodimer consisting of approximately 100-kDa molecular mass subunits. The optimal temperature for activity was 87 degrees C, with t1/2 of 18 h at 85 degrees C, 42 min at 90 degrees C, and 2 min at 98 degrees C. The alpha-galactosidase was a 61-kDa monomeric enzyme with a temperature optimum of 100 to 103 degrees C and t1/2 of 9 h at 85 degrees C, 2 h at 90 degrees C, and 3 min at 100 degrees C. These enzymes represent the most thermostable and thermoactive versions of these types yet reported and probably act synergistically to hydrolyze extracellular galactomannans to monosaccharides by T. neapolitana for nutritional purposes. The significance of such substrates in geothermal environments remains to be seen.

Molecular study and overexpression of the Clostridium cellulolyticum celF cellulase gene in Escherichia coli

The CelF-encoding sequence was isolated from Clostridium cellulolyticum genomic DNA using the inverse PCR technique. The gene lies between cipC (the gene encoding the cellulosome scaffolding protein) and celC (coding for the endoglucanase C) in the large cel cluster of this mesophilic cellulolytic Clostridium species. Comparisons between the deduced amino acid sequence of the mature CelF (693 amino acids, molecular mass 77626) and those of other beta-glycanases showed that this enzyme belongs to the recently proposed family L of cellulases (family 48 of glycosyl hydrolases). The protein was overproduced in Escherichia coli using the T7 expression system. It formed both cytoplasmic and periplasmic inclusion bodies when induction was performed at 37 degrees C. Surprisingly, the protein synthesized from the cytoplasmic production vector was degraded in the Ion protease-deficient strain BL21(DE3). The induction conditions were optimized with regard to the concentration of inductor, cell density, and temperature and time of induction in order to overproduce an active periplasmic protein (CelFp) which was both soluble and stable. It was collected using the osmotic shock method. The enzymic degradation of various cellulosic substrates by CelFp was studied. CelFp degraded swollen Avicel more efficiently than substituted soluble CM-cellulose or crystalline Avicel and was not active on xylan. Its activity is therefore quite different from that of endoglucanases, which are most active on CM-cellulose.

Family A cellulases: two essential tryptophan residues in endoglucanase III from Trichoderma reesei

Three tryptophan residues are readily oxidised by N-bromosuccinimide in endoglucanase III from Trichoderma reesei. Evidence was obtained that the residue first modified is situated in the cellulose-binding domain and the second in the enzyme's catalytic site. The latter influences the binding and hydrolysis of soluble substrates. The modification of a third residue does not further affect the catalytic properties. The present results complement published data concerning other identified catalytic residues, and help to clarify the active site structure of family A cellulases.

Correction of the beta-mannanase domain of the celC pseudogene from Caldocellulosiruptor saccharolyticus and activity of the gene product on kraft pulp

The celA, manA, and celB genes from Caldocellulosiruptor saccharolyticus compose a cellulase-hemicellulase gene cluster and are arranged on a 12-kb C. saccharolyticus genomic fragment of the recombinant lambda bacteriophage NZP lambda 2. The beginning of a fourth open reading frame (celC) which was homologous to the C. saccharolyticus manA and celA genes was located at the 3' end of the 12-kb NZP lambda 2 genomic fragment. Genome-walking PCR was used to isolate DNA fragments downstream of the C. saccharolyticus celB gene, and the entire nucleotide sequence of celC was obtained. From the preliminary nucleotide sequence, celC appeared to encode yet another multidomain bifunctional enzyme (CelC) consisting of an N-terminal endo-1,4-beta-D-glucanase domain (75% similar to CelA domain 1), two central cellulose-binding domains, and a C-terminal endo-1,4-beta-D-mannanase domain (98% similar to ManA domain 1). However, upon completion of the celC sequencing, two -1 frameshifts were identified in the region encoding the putative CelC mannanase domain. The isolated CelC mannanase domain exhibited no beta-mannanase activity, which supported this observation. Recombinant PCR was used to correct the celC frameshifts by inserting the appropriate nucleotides into the gene. The repaired celC fragment containing the base insertions (manB) expressed strong beta-mannanase activity on soluble mannan substrates and showed significant activity on kraft pulp as judged by the release of reducing sugars.

celA, another gene coding for a multidomain cellulase from the extreme thermophile Caldocellum saccharolyticum

Caldocellum saccharolyticum is an extremely thermophilic anaerobic bacterium capable of growth on cellulose and hemicellulose as sole carbon sources. Cellulase and hemicellulase genes have been found clustered together on its genome. The gene for one of the cellulases (celA) was isolated on a lambda genomic library clone, sequenced and found to comprise a large open-reading frame of 5253 base pairs that could be translated into a peptide of 1751 amino acids. To date, it is the largest cellulase gene sequenced. The translated product is a multidomain structure composed of two catalytic domains and two cellulose-binding domains linked by proline-threonine-rich regions (PT linkers). The N-terminal domain of celA encodes for an endoglucanase activity on carboxymethylcellulose, consistent with its high homology to the sequences of several other endo-1, 4-beta-D-glucanases. The carboxyterminal domain shows sequence homology with a cellulase from Clostridium thermocellum (CelS), which is known to act synergistically with a second component to hydrolyze crystalline cellulose. In the absence of a Caldocellum homologue for this second protein, we can detect no activity from this domain.

Cloning and sequencing of beta-mannanase gene from Bacillus subtilis NM-39

A gene encoding beta-mannanase from Bacillus subtilis NM-39 was cloned into Escherichia coli DH5 alpha by using pUC 18 and its nucleotide sequence was determined. The beta-mannanase gene was 1080 base pairs long and encoded a mature protein of 336 amino acids and a signal peptide of 24 amino acids. The deduced amino acid sequence of the cloned mannanase showed sequence homology with mannanase from alkalophilic Bacillus sp. strain AM-001 (about 50%).

Exoglucanase activities of the recombinant Clostridium thermocellum CelS, a major cellulosome component

The recombinant CelS (rCelS), the most abundant catalytic subunit of the Clostridium thermocellum cellulosome, displayed typical exoglucanase characteristics, including (i) a preference for amorphous or crystalline cellulose over carboxymethyl cellulose, (ii) an inability to reduce the viscosity of a carboxymethyl cellulose solution, and (iii) the production of few bound reducing ends on the solid substrate. The hydrolysis products from crystalline cellulose were cellobiose and cellotriose at a ratio of 5:1. The rCelS activity on amorphous cellulose was optimal at 70 degrees C and at pH 5 to 6. Its thermostability was increased by Ca2+. Sulfhydryl reagents had only a mild adverse effect on the rCelS activity. Cellotetraose was the smallest oligosaccharide substrate for rCelS, and the hydrolysis rate increased with the substrate chain length. Many of these properties were consistent with those of the cellulosome, indicating a key role for CelS.

Description of Caldicellulosiruptor saccharolyticus gen. nov., sp. nov: an obligately anaerobic, extremely thermophilic, cellulolytic bacterium

A new obligately anaerobic, extremely thermophilic, cellulolytic bacterium is described. The strain designated Tp8T 6331 is differentiated from thermophilic cellulolytic clostridia on the basis of physiological characteristics and phylogenetic position within the Bacillus/Clostridium subphylum of the Gram-positive bacteria. Strain Tp8T 6331 is assigned to a new genus Caldicellulosiruptor, as Caldicellulosiruptor saccharolyticus gen., nov., sp. nov.

Cloning and DNA sequence of the gene coding for Bacillus stearothermophilus T-6 xylanase

Bacillus stearothermophilus T-6 produces an extracellular thermostable xylanase. Affinity-purified polyclonal serum raised against the enzyme was used to screen a genomic library of B. stearothermophilus T-6 constructed in lambda-EMBL3. Two positive phages were isolated, both containing similar 13-kb inserts, and their lysates exhibited xylanase activity. A 3,696-bp SalI-BamHI fragment containing the xylanase gene was subcloned in Escherichia coli and subsequently sequenced. The open reading frame of xylanase T-6 consists of 1,236 bp. On the basis of sequence similarity, two possible -10 and -35 regions, a ribosome-binding site at the 5' end of the gene and a potential transcriptional termination motif at the 3' end of the gene, were identified. From the previously known N-terminal amino acid sequence of xylanase T-6 and the possible ribosome-binding site, a putative 28-amino-acid signal peptide was deduced. The mature xylanase T-6 consists of 379 amino acids with a calculated molecular weight and pI of 43,808 and 6.88, respectively. Multiple alignment of beta-glycanase amino acid sequences revealed highly conserved regions. Northern (RNA) blot analysis indicated that the xylanase T-6 transcript is about 1.4 kb and that the induction of this enzyme synthesis by xylose is on the transcriptional level.

The biological degradation of cellulose

Cellulolytic microorganisms play an important role in the biosphere by recycling cellulose, the most abundant carbohydrate produced by plants. Cellulose is a simple polymer, but it forms insoluble, crystalline microfibrils, which are highly resistant to enzymatic hydrolysis. All organisms known to degrade cellulose efficiently produce a battery of enzymes with different specificities, which act together in synergism. The study of cellulolytic enzymes at the molecular level has revealed some of the features that contribute to their activity. In spite of a considerable diversity, sequence comparisons show that the catalytic cores of cellulases belong to a restricted number of families. Within each family, available data suggest that the various enzymes share a common folding pattern, the same catalytic residues, and the same reaction mechanism, i.e. either single substitution with inversion of configuration or double substitution resulting in retention of the beta-configuration at the anomeric carbon. An increasing number of three-dimensional structures is becoming available for cellulases and xylanases belonging to different families, which will provide paradigms for molecular modeling of related enzymes. In addition to catalytic domains, many cellulolytic enzymes contain domains not involved in catalysis, but participating in substrate binding, multi-enzyme complex formation, or possibly attachment to the cell surface. Presumably, these domains assist in the degradation of crystalline cellulose by preventing the enzymes from being washed off from the surface of the substrate, by focusing hydrolysis on restricted areas in which the substrate is synergistically destabilized by multiple cutting events, and by facilitating recovery of the soluble degradation products by the cellulolytic organism. In most cellulolytic organisms, cellulase synthesis is repressed in the presence of easily metabolized, soluble carbon sources and induced in the presence of cellulose. Induction of cellulases appears to be effected by soluble products generated from cellulose by cellulolytic enzymes synthesized constitutively at a low level. These products are presumably converted into true inducers by transglycosylation reactions. Several applications of cellulases or hemicellulases are being developed for textile, food, and paper pulp processing. These applications are based on the modification of cellulose and hemicellulose by partial hydrolysis. Total hydrolysis of cellulose into glucose, which could be fermented into ethanol, isopropanol or butanol, is not yet economically feasible. However, the need to reduce emissions of greenhouse gases provides an added incentive for the development of processes generating fuels from cellulose, a major renewable carbon source.

Hidden domains and active site residues in beta-glycanase-encoding gene sequences?

Reading-frame corrective shifts in the nucleotide sequence upstream, within, or downstream from the putative coding region of several beta-glycanase-encoding genes reported in the literature reveal hidden active-site residues or even additional domains, including a cellulose-binding domain on a beta-mannanase-encoding gene. These findings also help in assigning, to cellulase family A, two enzymes previously found to lack sequence similarity with known cellulase families.

Beta-mannanase of Streptomyces lividans 66: cloning and DNA sequence of the manA gene and characterization of the enzyme

The gene coding for a beta-mannanase was cloned homologously from Streptomyces lividans and its DNA sequence was determined. The fully secreted enzyme was isolated and purified from culture filtrates of the hyperproducing clone S. lividans IAF36 grown in mineral salt media containing galactomannan as the main carbon source. It had a molecular mass of 36 kDa and a specific activity of 876 i.u./mg of protein. Under the assay conditions used, the optimal enzyme activity was obtained at 58 degrees C and a pH of 6.8. The pI was 3.5. The kinetic constants of this mannanase determined with galactomannan as substrate were a Vmax. of 205 i.u./mg of enzyme and a Km of 0.77 mg/ml. Data from SDS/PAGE and Western blotting show that the cloned enzyme was identical to that of the wild-type strain.

Cloning and DNA sequence of the gene coding for Clostridium thermocellum cellulase Ss (CelS), a major cellulosome component

Clostridium thermocellum ATCC 27405 produces an extracellular cellulase system capable of hydrolyzing crystalline cellulose. The enzyme system involves a multicomponent protein aggregate (the cellulosome) with a total molecular weight in the millions, impeding mechanistic studies. However, two major components of the aggregate, SS (M(r) = 82,000) and SL (M(r) = 250,000), which act synergistically to hydrolyze crystalline cellulose, have been identified (J. H. D. Wu, W. H. Orme-Johnson, and A. L. Demain, Biochemistry 27:1703-1709, 1988). To further study this synergism, we cloned and sequenced the gene (celS) coding for the SS (CelS) protein by using a degenerate, inosine-containing oligonucleotide probe whose sequence was derived from the N-terminal amino acid sequence of the CelS protein. The open reading frame of celS consisted of 2,241 bp encoding 741 amino acid residues. It encoded the N-terminal amino acid sequence and two internal peptide sequences determined for the native CelS protein. A putative ribosome binding site was identified at the 5' end of the gene. A putative signal peptide of 27 amino acid residues was adjacent to the N terminus of the CelS protein. The predicted molecular weight of the secreted protein was 80,670. The celS gene contained a conserved reiterated sequence encoding 24 amino acid residues found in proteins encoded by many other clostridial cel or xyn genes. A palindromic structure was found downstream from the open reading frame. The celS gene is unique among the known cel genes of C. thermocellum. However, it is highly homologous to the partial open reading frame found in C. cellulolyticum and in Caldocellum saccharolyticum, indicating that these genes belong to a new family of cel genes.

The beta-mannanase from "Caldocellum saccharolyticum" is part of a multidomain enzyme

The complete sequence of a beta-mannanase gene from an anaerobic extreme thermophile was determined, and it shows that the expressed protein consists of two catalytic domains and two binding domains separated by spacer regions rich in proline and threonine residues. The amino-terminal catalytic domain has beta-mannanase activity, and the carboxy-terminal domain acts as an endoglucanase. Neither domain shows homology with any other cellulase or hemicellulase sequence at the nucleic acid or protein level.