Composition of soil microbial communities enriched on a mixture of aromatic hydrocarbons

Soil volatilomics uncovers tight linkage between soybean presence and soil omics profiles in agricultural fields

Securing a stable food supply and achieving sustainable agricultural production are essential for mitigating future food insecurity. Soil metabolomics is a promising tool for capturing soil status, which is a critical issue for future sustainable food security. This study aims to provide deeper insights into the status of soybean-grown fields under varying soil conditions over three years by employing comprehensive soil volatile organic compound (VOC) profiling, also known as soil volatilomics. Profiling identified approximately 200 peaks in agricultural fields. The soil of soybean-presented plots exhibited markedly higher VOC levels than those of non-soybean plots during the flowering season. Pentanoic acid, 2,2,4-trimethyl-3-carboxyisopropyl, isobutyl ester, a discriminative soil VOC, was identified through multivariate data analysis as a distinctively present VOC in fields with or without soybean plants during the flowering period. Soil VOC profiles exhibited strong correlations with soil-related omics datasets (soil ionome, microbiome, metabolome, and physics) and no significant correlations with root microbiome and rhizosphere chemicals. These findings indicate that soil VOC profiles could serve as a valuable indicator for assessing soil status, thereby supporting efforts to ensure future global food security.

Unravelling Microbial Communities Associated with Different Light Non-Aqueous Phase Liquid Types Undergoing Natural Source Zone Depletion Processes at a Legacy Petroleum Site

Petroleum contaminants are exposed to weathering when released into environment, resulting in the alteration of their chemical composition. Here, we investigated microbial communities through the soil profile at an industrial site, which was exposed to various petroleum products for over 50 years. The petroleum is present as light non-aqueous phase liquid (LNAPL) and is undergoing natural source zone depletion (NSZD). Microbial community composition was compared to the contaminant type, concentration, and its depth of obtained soil cores. A large population of Archaea, particularly Methanomicrobia and Methanobacteria and indication of complex syntrophic relationships of methanogens, methanotrophs and bacteria were found in the contaminated cores. Different families were enriched across the LNAPL types. Results indicate methanogenic or anoxic conditions in the deeper and highly contaminated sections of the soil cores investigated. The contaminant was highly weathered, likely resulting in the formation of recalcitrant polar compounds. This research provides insight into the microorganisms fundamentally associated with LNAPL, throughout a soil depth profile above and below the water table, undergoing NSZD processes at a legacy petroleum site. It advances the potential for integration of microbial community effects on bioremediation and in response to physicochemical partitioning of LNAPL components from different petroleum types.

Comparative Genomic Analysis of Three Pseudomonas Species Isolated from the Eastern Oyster (Crassostrea virginica) Tissues, Mantle Fluid, and the Overlying Estuarine Water Column

The eastern oysters serve as important keystone species in the United States, especially in the Gulf of Mexico estuarine waters, and at the same time, provide unparalleled economic, ecological, environmental, and cultural services. One ecosystem service that has garnered recent attention is the ability of oysters to sequester impurities and nutrients, such as nitrogen (N), from the estuarine water that feeds them, via their exceptional filtration mechanism coupled with microbially-mediated denitrification processes. It is the oyster-associated microbiomes that essentially provide these myriads of ecological functions, yet not much is known on these microbiota at the genomic scale, especially from warm temperate and tropical water habitats. Among the suite of bacterial genera that appear to interplay with the oyster host species, pseudomonads deserve further assessment because of their immense metabolic and ecological potential. To obtain a comprehensive understanding on this aspect, we previously reported on the isolation and preliminary genomic characterization of three Pseudomonas species isolated from minced oyster tissue (P. alcaligenes strain OT69); oyster mantle fluid (P. stutzeri strain MF28) and the water collected from top of the oyster reef (P. aeruginosa strain WC55), respectively. In this comparative genomic analysis study conducted on these three targeted pseudomonads, native to the eastern oyster and its surrounding environment, provided further insights into their unique functional traits, conserved gene pools between the selected pseudomonads, as well as genes that render unique characteristics in context to metabolic traits recruited during their evolutionary history via horizontal gene transfer events as well as phage-mediated incorporation of genes. Moreover, the strains also supported extensively developed resistomes, which suggests that environmental microorganisms native to relatively pristine environments, such as Apalachicola Bay, Florida, have also recruited an arsenal of antibiotic resistant gene determinants, thus posing an emerging public health concern.

Parallelized, Aerobic, Single Carbon-Source Enrichments from Different Natural Environments Contain Divergent Microbial Communities

Microbial communities that inhabit environments such as soil can contain thousands of distinct taxa, yet little is known about how this diversity is maintained in response to environmental perturbations such as changes in the availability of carbon. By utilizing aerobic substrate arrays to examine the effect of carbon amendment on microbial communities taken from six distinct environments (soil from a temperate prairie and forest, tropical forest soil, subalpine forest soil, and surface water and soil from a palustrine emergent wetland), we examined how carbon amendment and inoculum source shape the composition of the community in each enrichment. Dilute subsamples from each environment were used to inoculate 96-well microtiter plates containing triplicate wells amended with one of 31 carbon sources from six different classes of organic compounds (phenols, polymers, carbohydrates, carboxylic acids, amines, amino acids). After incubating each well aerobically in the dark for 72 h, we analyzed the composition of the microbial communities on the substrate arrays as well as the initial inocula by sequencing 16S rRNA gene amplicons using the Illumina MiSeq platform. Comparisons of alpha and beta diversity in these systems showed that, while the composition of the communities that grow to inhabit the wells in each substrate array diverges sharply from that of the original community in the inoculum, these enrichment communities are still strongly affected by the inoculum source. We found most enrichments were dominated by one or several OTUs most closely related to aerobes or facultative anaerobes from the Proteobacteria (e.g., Pseudomonas, Burkholderia, and Ralstonia) or Bacteroidetes (e.g., Chryseobacterium). Comparisons within each substrate array based on the class of carbon source further show that the communities inhabiting wells amended with a carbohydrate differ significantly from those enriched with a phenolic compound. Selection therefore seems to play a role in shaping the communities in the substrate arrays, although some stochasticity is also seen whereby several replicate wells within a single substrate array display strongly divergent community compositions. Overall, the use of highly parallel substrate arrays offers a promising path forward to study the response of microbial communities to perturbations in a changing environment.

Microbial succession in response to pollutants in batch-enrichment culture

As a global problem, environmental pollution is an important factor to shape the microbial communities. The elucidation of the succession of microbial communities in response to pollutants is essential for developing bioremediation procedures. In the present study, ten batches of soil-enrichment subcultures were subjected to four treatments: phenanthrene, n-octadecane, phenanthrene + n-octadecane, or phenanthrene + n-octadecane + CdCl₂. Forty pollutant-degrading consortia, corresponding to each batch of the four treatments were obtained. High-throughput sequencing of the 16S rRNA gene revealed that the diversity, richness and evenness of the consortia decreased throughout the subculturing procedure. The well-known hydrocarbon degraders Acinetobacter, Gordonia, Sphingobium, Sphingopyxis, and Castellaniella and several other genera, including Niabella and Naxibacter, were detected in the enriched consortia. The predominant microbes varied and the microbial community in the consortia gradually changed during the successive subculturing depending on the treatment, indicating that the pollutants influenced the microbial successions. Comparison of the networks in the treatments indicated that organic pollutants and CdCl₂ affected the co-occurrence patterns in enriched consortia. In conclusion, single environmental factors, such as the addition of nutrients or selection pressure, can shape microbial communities and partially explain the extensive differences in microbial community structures among diverse environments.

Development of an NDIR CO₂ sensor-based system for assessing soil toxicity using substrate-induced respiration

The eco-toxicological indicators used to evaluate soil quality complement the physico-chemical criteria employed in contaminated site remediation, but their cost, time, sophisticated analytical methods and in-situ inapplicability pose a major challenge to rapidly detect and map the extent of soil contamination. This paper describes a sensor-based approach for measuring potential (substrate-induced) microbial respiration in diesel-contaminated and non-contaminated soil and hence, indirectly evaluates their microbial activity. A simple CO2 sensing system was developed using an inexpensive non-dispersive infrared (NDIR) CO2 sensor and was successfully deployed to differentiate the control and diesel-contaminated soils in terms of CO2 emission after glucose addition. Also, the sensor system distinguished glucose-induced CO2 emission from sterile and control soil samples (p ≤ 0.0001). Significant effects of diesel contamination (p ≤ 0.0001) and soil type (p ≤ 0.0001) on glucose-induced CO2 emission were also found. The developed sensing system can provide in-situ evaluation of soil microbial activity, an indicator of soil quality. The system can be a promising tool for the initial screening of contaminated environmental sites to create high spatial density maps at a relatively low cost.

A survey of deepwater horizon (DWH) oil-degrading bacteria from the Eastern oyster biome and its surrounding environment

The deepwater horizon (DWH) accident led to the release of an estimated 794,936,474 L of crude oil into the northern Gulf of Mexico over an 85 day period in 2010, resulting in the contamination of the Gulf of Mexico waters, sediments, permeable beach sands, coastal wetlands, and marine life. This study examines the potential response of the Eastern oyster’s microbiome to hydrocarbon contamination and compares it with the bacterial community responses observed from the overlaying water column (WC) and the oyster bed sediments. For this purpose, microcosms seeded with DWH crude oil were established and inoculated separately with oyster tissue (OT), mantle fluid (MF), overlaying WC, and sediments (S) collected from Apalachicola Bay, FL, USA. Shifts in the microbial community structure in the amended microcosms was monitored over a 3-month period using automated ribosomal intergenic spacer region analysis, which showed that the microbiome of the OT and MF were more similar to the sediment communities than those present in the overlaying WC. This pattern remained largely consistent, regardless of the concentration of crude oil or the enrichment period. Additionally, 72 oil-degrading bacteria were isolated from the microcosms containing OT, MF, WC, and S and identified using 16S ribosomal RNA gene sequencing and compared by principal component analysis, which clearly showed that the WC isolates were different to those identified from the sediment. Conversely, the OT and MF isolates clustered together; a strong indication that the oyster microbiome is uniquely structured relative to its surrounding environment. When selected isolates from the OT, MF, WC, and S were assessed for their oil-degrading potential, we found that the DWH oil was biodegraded between 12 and 42%, under the existing conditions.

Effect of oxic/anoxic switches on bacterial communities and PAH biodegradation in an oil-contaminated sludge

PURPOSE

We studied the effect of alternations of aeration on both the autochthonous bacterial communities from an oily sludge to the endogenous polycyclic aromatic hydrocarbons (PAH) biodegradation compared to a permanent oxic condition.

METHODS

Genomic and transcriptional analyses associated with chemical measurements were used to assess the dynamics of bacteria coupled to PAH removal during an incubation of 26 days.

RESULTS AND CONCLUSIONS

The autochthonous bacterial communities of an oil sludge showed a strong potential to adapt and degrade PAH when they were subjected to alternating anoxic/oxic conditions, as well as under an oxic condition. In addition, changes in the bacterial communities were related to the different phases of hydrocarbon degradation, and the removal efficiency of PAH was similar in both switching and permanent oxic conditions. This methodology could be useful for an alternative solution of oil sludge treatment with a low-cost processing, as its efficiency is similar to that of a permanent oxic incubation which is more expensive in oxygen supply.

Temporal changes in Sphingomonas and Mycobacterium populations in mangrove sediments contaminated with different concentrations of polycyclic aromatic hydrocarbons (PAHs)

The change in community diversity and structure of the indigenous, dominant, polycyclic aromatic hydrocarbon (PAH)-degrading bacterial genera, Sphingomonas and Mycobacterium, due to contamination in the environment is not very well known. A combination of PCR-DGGE with specific primers and a cultivation-dependent microbiological method was used to detect different populations of Sphingomonas and Mycobacterium in mangrove sediments. The structure of the entire bacterial community (including Sphingomonas) did not show a shift due to environmental contamination, whereas the diversity of Mycobacterium populations in mangrove sediments with higher PAH contamination increased from exposure between Day 0 and Day 30. The isolated Mycobacterium strains migrated to the same position as the major bands of the bacterial communities in Mycobacterium-specific DGGE. A dioxygenase gene system, nidA, which is commonly found in PAH-degrading Mycobacterium strains, was also detected in the more highly contaminated sediment slurries. The present study revealed that Mycobacterium species were the dominant PAH-degraders and played an important role in degrading PAHs in contaminated mangrove sediments.

Degradation of a benzene-toluene mixture by hydrocarbon-adapted bacterial communities

We examined the rate of degradation of a benzene–toluene mixture in aerobic microcosms prepared with samples of an aquifer that lies below a petrochemical plant (SIReN, UK). Five samples exposed to different concentrations of benzene (from 0.6 to 317 mg l⁻¹) were used. Fast degradation (approx. 1–6 mg l⁻¹ day⁻¹) of both contaminants was observed in all groundwater samples and complete degradation was recorded by the seventh day except for one sample. We also identified the microbial community in each of the samples by culture-independent techniques. Two of the less impacted samples harbour the aerobic benzene degrader Pseudomonas fluorescens, while Acidovorax and Arthrobacter spp. were found in the most polluted sample and are consistent with the population observed in situ. Hydrogenophaga was found in the deepest sample while Rhodoferax spp. were recovered in an alkaline sample (pH 8.4) and may also be implicated in benzene degradation. Time series analysis shows that each of the samples has a different community but they remain stable over the degradation period. This study provides new information on a well not previously studied (no. 309s) and confirms that adapted communities have the ability to degrade hydrocarbon mixtures and could be used in further bioaugmentation approaches in contaminated sites.

Novel aerobic benzene degrading microorganisms identified in three soils by stable isotope probing

The remediation of benzene contaminated groundwater often involves biodegradation and although the mechanisms of aerobic benzene biodegradation in laboratory cultures have been well studied, less is known about the microorganisms responsible for benzene degradation in mixed culture samples or at contaminated sites. To address this knowledge gap, DNA based stable isotope probing (SIP) was utilized to identify active benzene degraders in microcosms constructed with soil from three sources (a contaminated site and two agricultural sites). For this, replicate microcosms were amended with either labeled (¹³C) or unlabeled benzene and the extracted DNA samples were ultracentrifuged, fractioned and subject to terminal restriction fragment length polymorphism (TRFLP). The dominant benzene degraders (responsible for ¹³C uptake) were determined by comparing relative abundance of TRFLP phylotypes in heavy fractions of labeled benzene (¹³C) amended samples to the controls (from unlabeled benzene amended samples). Two phylotypes (a Polaromonas sp. and an Acidobacterium) were the major benzene degraders in the microcosms constructed from the contaminated site soil, whereas one phylotype incorporated the majority of the benzene-derived ¹³C in each of the agricultural soils ("candidate" phylum TM7 and an unclassified Sphingomonadaceae).

Extensive bacterial diversity indicates the potential operation of a dynamic micro-ecology within domestic rainwater storage systems

The concept that domestic rainwater storage tanks may host sustainable microbial ecosystems has not previously been addressed. The bacterial diversity, cultivated from more than 80 samples from 22 tanks at various locations across eastern Australia, is presented here as prima facie evidence for the potential operation of a functional micro-ecology within rainwater storage systems. Cultivated isolates were found to comprise members of four major bacterial divisions; Proteobacteria, Firmicutes, Actinobacteria and Bacteroidetes, including more than 200 species from 80 different genera. The pattern of abundance distribution was typical of that observed in most natural communities, comprising a small number of abundant taxa and a multitude of rare taxa, while the specific composition resembled that previously described in a number of natural aquatic systems. Although Proteobacteria from alpha, beta and gamma sub-classes were dominant, a set of core taxa comprising representative genera from all four phyla could be identified. Coliform and other species specifically associated with faecal material comprised <15% of the species identified, and represented <1.5% of total average abundance. The composition of the cultivated populations and scope of diversity present, suggested that rainwater tanks may support functional ecosystems comprising complex communities of environmental bacteria, which may have beneficial implications for the quality of harvested rainwater.

Phytoremediation of BTEX hydrocarbons: potential impacts of diurnal groundwater fluctuation on microbial degradation

Volatile hydrocarbons have multiple potential fates in phytoremediation. This research investigated the relationship between biodegradation and plant uptake of BTEX compounds in laboratory and field settings. At a phytoremediation site, preliminary studies revealed minimal uptake into trees and enhanced degradation potential in the rhizosphere and in the bulk soiL Increased oxygen transport to the vadose zone caused by diurnal rise and fall of the water table was hypothesized to enhance degradation in the bulk soil. A detailed greenhouse study was then conducted to investigate potential bioremediation impacts using field-site soil and DN34 hybrid poplar trees. In rhizosphere soils, the contaminated-planted reactor had significantly higher BTEX degrader populations versus the uncontaminated-planted reactor, as was anticipated. The bulk soil in the planted-contaminated reactor had increased degrader populations than the unplanted-contaminated soil or planted-uncontaminated soil, and planting increased degradation throughout the soil profile, not just in the limited volume of rhizosphere soils. Oxygen diffusive and advective transport into reactors was modeled and calculated. Oxygen input in planted reactors was at least 3 to 5 times higher than in unplanted reactors, and increasing oxygen input lead to increased degrader populations in a linear manner. These results combined with the knowledge that high-transpiration trees draw the contaminated groundwater to the capillary fringe and the rhizosphere indicate that phytoremediation can aid microbial degradation via multiple mechanisms: increasing degrader populations, increasing oxygen input via groundwater diurnal fluctuations, and transporting contaminants to the biologically-enriched soil profile.

Modelling the fate of styrene in a mixed petroleum hydrocarbon plume

Severe petroleum hydrocarbon contamination (styrene and the BTEX compounds: benzene, toluene, ethylbenzene and the isomers of xylene) from leaking sewers was detected in a Quaternary aquifer below a chemical plant in the Padana Plain, Italy. From 1994, active pump and treat remediation has been employed. The site is bordered by canals which, in combination with variable pumping rates and groundwater flow directions, control groundwater levels. In this study we sought to determine the fate of styrene at the site within a mixed styrene/BTEX plume where the hydraulic boundaries induced strong seasonal variations in flows. In order to determine the fate of styrene, detailed field investigations provided intensive depth profile information. This information was then incorporated into a staged flow and reactive transport modelling. Three sets of measurements were obtained from sampling multilevel samplers (MLSs) under different hydraulic conditions at the site. These included measurements of BTEX, styrene, all major ions, pH and redox potential. A three-dimensional transient flow model was developed and calibrated to simulate an unconfined sandy aquifer with a variable flow field. Subsequently a reactive, multi-component transport model was employed to simulate the fate of dissolved BTEX and styrene along a selected flow line at the site. Each petroleum hydrocarbon compound was transported as independent species. Different, kinetically controlled degradation rates and a toxicity effect were simulated to explain the observed, selective degradation of pollutants in groundwater. Calibration of the model was accomplished by comparison with the three different sets of measurements obtained from the MLS devices. The results from various scenarios show that the detailed simulation of geochemical changes can be very useful to improve the site's conceptual model.

Molecular bacterial diversity and distribution in waste from a steel plant

We characterized the bacterial diversity of newly produced steelmaking wastes (NPSW) and steelmaking wastes deposited (SWD) in a restricted land area, generated by the siderurgic industry, using the 16S rDNA clone library approach. A total of 212 partial-length sequences were analyzed, revealing 123 distinct operational taxonomic units (OTUs) determined by the DOTUR program to 97% sequence similarity. Phylogenetic analysis of bacterial 16S rDNA sequences from the NPSW and SWD libraries demonstrated that Gammaproteobacteria, Betaproteobacteria, Alphaproteobacteria, Actinobacteria, Planctomycetes, Firmicutes, and Bacteroidetes were represented in both libraries. Deltaproteobacteria, Acidobacteria, Chloroflexi, Deinococcus-thermus, Gemmatimonadetes, and candidate divisions OP10 and OD1 were only present in the SWD library, and Nitrospira was only present in the NPSW library. The abundance of sequences affiliated with Gammaproteobacteria was high in both libraries. Six previously unclassified OTUs may represent novel taxa. Based on diversity indices (Simpson, Shannon–Weaver, Chao1, and ACE), the SWD library had a higher diversity. LIBSHUFF comparisons of the composition of the 2 libraries showed that they were significantly different. These results indicate that the bacterial communities in steelmaking wastes present high phylogenetic diversity and complexity. A possible association between the functional diversity and the bacterial communities’ complexity requires further phenotypic investigation.

Comparison of microbial community composition and activity in sulfate-reducing batch systems remediating mine drainage

Five microbial inocula were evaluated in batch tests for the ability to remediate mine drainage (MD). Dairy manure (DM), anaerobic digester sludge, substrate from the Luttrell (LUTR) and Peerless Jenny King (PJK) sulfate-reducing permeable reactive zones (SR-PRZs) and material from an MD-treatment column that had been inoculated with material from a previous MD-treatment column were compared in terms of sulfate and metal removal and pH neutralization. The microbial communities were characterized at 0, 2, 4, 9, and 14 weeks using denaturing gradient gel electrophoresis and quantitative polymerase chain reaction to quantify all bacteria and the sulfate-reducing bacteria of the genus Desulfovibrio. The cultures inoculated with the LUTR, PJK, and DM materials demonstrated significantly higher rates of sulfate and metal removal, and contained all the microorganisms associated with the desired functions of SR-PRZs (i.e., polysaccharide degradation, fermentation, and sulfate reduction) as well as a relatively high proportion of Desulfovibrio spp. These results demonstrate that inoculum influences performance and also provide insights into key aspects of inoculum composition that impact performance. This is the first systematic biomolecular examination of the relationship between microbial community composition and MD remediation capabilities.

Different bacterial groups for biodegradation of three- and four-ring PAHs isolated from a Hong Kong mangrove sediment

Mangrove sediments have been found to degrade three- to four-ring PAHs extensively. In the present study, 11 strains from 4 genera Mycobacterium (3 strains), Sphingomonas (5), Terrabacter (2) and Rhodococcus (1) were isolated from a single surface sediment sample of a Hong Kong mangrove swamp, among which the Terrabacter strains were isolated to grow with fluoranthene for the first time. Although all four genera could degrade three- and four-ring PAHs, their in situ activities in natural sediment slurry were found to be different. A cultivable method showed that Sphingomonas strains grew rapidly under the induction of three-ring, but not four-ring PAHs, while only Mycobacterium degrading strains dominated in the four-ring PAHs spiked slurry. Culture-independent method using a reverse transcriptional PCR showed expressions of nahAc-like (mainly found in Gram-negative bacteria) and nidA-like (in Gram-positive bacteria) dioxygenase genes parallel with the degradation of three- and four-ring PAHs, respectively. The present study suggested that surface mangrove sediments harbored diverse PAH-degrading bacteria, which showed different importance for biodegradation of three- and four-ring PAHs in the sediment.

Application of in situ biosparging to remediate a petroleum-hydrocarbon spill site: field and microbial evaluation

In this study, a full-scale biosparging investigation was conducted at a petroleum-hydrocarbon spill site. Field results reveal that natural attenuation was the main cause of the decrease in major contaminants [benzene, toluene, ethylbenzene, and xylenes (BTEX)] concentrations in groundwater before the operation of biosparging system. Evidence of the occurrence of natural attenuation within the BTEX plume includes: (1) decrease of DO, nitrate, sulfate, and redox potential, (2) production of dissolved ferrous iron, sulfide, methane, and CO(2), (3) decreased BTEX concentrations along the transport path, (4) increased microbial populations, and (5) limited spreading of the BTEX plume. Field results also reveal that the operation of biosparging caused the shifting of anaerobic conditions inside the plume to aerobic conditions. This variation can be confirmed by the following field observations inside the plume due to the biosparging process: (1) increase in DO, redox potential, nitrate, and sulfate, (2) decrease dissolved ferrous iron, sulfide, and methane, (3) increased total cultivable heterotrophs, and (4) decreased total cultivable anaerobes as well as methanogens. Results of polymerase chain reaction, denaturing gradient gel electrophoresis, and nucleotide sequence analysis reveal that three BTEX biodegraders (Candidauts magnetobacterium, Flavobacteriales bacterium, and Bacteroidetes bacterium) might exist at this site. Results show that more than 70% of BTEX has been removed through the biosparging system within a 10-month remedial period at an averaged groundwater temperature of 18 degrees C. This indicates that biosparging is a promising technology to remediate BTEX contaminated groundwater.

The use of molecular techniques to characterize the microbial communities in contaminated soil and water

Traditionally, the identification and characterization of microbial communities in contaminated soil and water has previously been limited to those microorganisms that are culturable. The application of molecular techniques to study microbial populations at contaminated sites without the need for culturing has led to the discovery of unique and previously unrecognized microorganisms as well as complex microbial diversity in contaminated soil and water which shows an exciting opportunity for bioremediation strategies. Nucleic acid extraction from contaminated sites and their subsequent amplification by polymerase chain reaction (PCR) has proved extremely useful in assessing the changes in microbial community structure by several microbial community profiling techniques. This review examines the current application of molecular techniques for the characterization of microbial communities in contaminated soil and water. Techniques that identify and quantify microbial population and catabolic genes involved in biodegradation are examined. In addition, methods that directly link microbial phylogeny to its ecological function at contaminated sites as well as high throughput methods for complex microbial community studies are discussed.

Influence of bioturbation by the polychaete Nereis diversicolor on the structure of bacterial communities in oil contaminated coastal sediments

Patterns of change in the structure of bacterial communities monitored by ribosomal intergenic spacer analysis (RISA) in oil contaminated sediments inhabited or not by the marine polychaete Nereis diversicolor were studied during 45 days under laboratory conditions. Results supported by principal component analysis showed a marked response of the bacterial communities to the oil contamination and to the presence of N. diversicolor. Phylogenetic affiliation of specific RISA bands showed that, in the contaminated sediments, the presence of the marine polychaetes favoured the development of bacteria which may play an active role in natural bioremediation processes of oil polluted environments.

Bacterial diversity in the active stage of a bioremediation system for mineral oil hydrocarbon-contaminated soils

Soils contaminated with mineral oil hydrocarbons are often cleaned in off-site bioremediation systems. In order to find out which bacteria are active during the degradation phase in such systems, the diversity of the active microflora in a degrading soil remediation system was investigated by small-subunit (SSU) rRNA analysis. Two sequential RNA extracts from one soil sample were generated by a procedure incorporating bead beating. Both extracts were analysed separately by generating individual SSU rDNA clone libraries from cDNA of the two extracts. The sequencing results showed moderate diversity. The two clone libraries were dominated by Gammaproteobacteria, especially Pseudomonas spp. Alphaproteobacteria and Betaproteobacteria were two other large groups in the clone libraries. Actinobacteria, Firmicutes, Bacteroidetes and Epsilonproteobacteria were detected in lower numbers. The obtained sequences were predominantly related to genera for which cultivated representatives have been described, but were often clustered together in the phylogenetic tree, and the sequences that were most similar were originally obtained from soils and not from pure cultures. Most of the dominant genera in the clone libraries, e.g. Pseudomonas, Acinetobacter, Sphingomonas, Acidovorax and Thiobacillus, had already been detected in (mineral oil hydrocarbon) contaminated environmental samples. The occurrence of the genera Zymomonas and Rhodoferax was novel in mineral oil hydrocarbon-contaminated soil.

Microbial dioxygenase gene population shifts during polycyclic aromatic hydrocarbon biodegradation

The degradation of polycyclic aromatic hydrocarbons (PAHs) by bacteria has been widely studied. While many pure cultures have been isolated and characterized for their ability to grow on PAHs, limited information is available on the diversity of microbes involved in PAH degradation in the environment. We have designed generic PCR primers targeting the gene fragment encoding the Rieske iron sulfur center common to all PAH dioxygenase enzymes. These Rieske primers were employed to track dioxygenase gene population shifts in soil enrichment cultures following exposure to naphthalene, phenanthrene, or pyrene. PAH degradation was monitored by gas chromatograph with flame ionization detection. DNA was extracted from the enrichment cultures following PAH degradation. 16S rRNA and Rieske gene fragments were PCR amplified from DNA extracted from each enrichment culture and an unamended treatment. The PCR products were cloned and sequenced. Molecular monitoring of the enrichment cultures before and after PAH degradation using denaturing gradient gel electrophoresis and 16S rRNA gene libraries suggests that specific phylotypes of bacteria were associated with the degradation of each PAH. Sequencing of the cloned Rieske gene fragments showed that different suites of genes were present in soil microbe populations under each enrichment culture condition. Many of the Rieske gene fragment sequences fell into clades which are distinct from the reference dioxygenase gene sequences used to design the PCR primers. The ability to profile not only the bacterial community but also the dioxygenases which they encode provides a powerful tool for both assessing bioremediation potential in the environment and for the discovery of novel dioxygenase genes.

Culture-dependent and -independent approaches establish the complexity of a PAH-degrading microbial consortium

A microbial consortium (AM) obtained by sequential enrichment in liquid culture with a polycyclic aromatic hydrocarbon (PAH) mixture of three- and four-ringed PAHs as a sole source of carbon and energy was examined using a triple-approach method based on various cultivation strategies, denaturing gradient gel electrophoresis (DGGE), and the screening of 16S and 18S rRNA gene clone libraries. Eleven different sequences by culture-dependent techniques and seven by both DGGE and clone libraries were obtained. The comparison of three variable regions (V3-V5) of the 16S rRNA gene between the sequences obtained yielded 19 different microbial components. Proteobacteria were the dominant group, representing 83% of the total, while the Cytophaga-Flexibacter-Bacteroides group (CFB) was 11% and the Ascomycota fungi 6%. Beta-proteobacteria were predominant in the DGGE and clone library methods, whereas they were a minority in culturable strains. The highest diversity and number of noncoincident sequences were achieved by the cultivation method that showed members of the alpha-, beta-, and gamma-Proteobacteria; CFB bacterial group; and Ascomycota fungi. Only six of the 11 strains isolated showed PAH-degrading capability. The bacterial strain (AMS7) and the fungal strain (AMF1), which were similar to Sphingomonas sp. and Fusarium sp., respectively, achieved the greatest PAH depletion. The results indicate that polyphasic assessment is necessary for a proper understanding of the composition of a microbial consortium.

Dynamics of an oligotrophic bacterial aquifer community during contact with a groundwater plume contaminated with benzene, toluene, ethylbenzene, and xylenes: an in situ mesocosm study

An in situ mesocosm system was designed to monitor the in situ dynamics of the microbial community in polluted aquifers. The mesocosm system consists of a permeable membrane pocket filled with aquifer material and placed within a polypropylene holder, which is inserted below groundwater level in a monitoring well. After a specific time period, the microcosm is recovered from the well and its bacterial community is analyzed. Using this system, we examined the effect of benzene, toluene, ethylbenzene, and xylene (BTEX) contamination on the response of an aquifer bacterial community by denaturing gradient gel electrophoresis analysis of PCR-amplified 16S rRNA genes and PCR detection of BTEX degradation genes. Mesocosms were filled with nonsterile or sterile aquifer material derived from an uncontaminated area and positioned in a well located in either the uncontaminated area or a nearby contaminated area. In the contaminated area, the bacterial community in the microcosms rapidly evolved into a stable community identical to that in the adjacent aquifer but different from that in the uncontaminated area. At the contaminated location, bacteria with tmoA- and xylM/xylE1-like BTEX catabolic genotypes colonized the aquifer, while at the uncontaminated location only tmoA-like genotypes were detected. The communities in the mesocosms and in the aquifer adjacent to the wells in the contaminated area consisted mainly of Proteobacteria. At the uncontaminated location, Actinobacteria and Proteobacteria were found. Our results indicate that communities with long-term stability in their structures follow the contamination plume and rapidly colonize downstream areas upon contamination.

Bacterial diversity promotes community stability and functional resilience after perturbation

The relationships between bacterial community diversity and stability were investigated by perturbing soils, with naturally differing levels of diversity, to equivalent toxicity using copper sulfate and benzene. Benzene amendment led to large decreases in total bacterial numbers and biomass in both soils. Benzene amendment of an organo-mineral/improved pasture soil altered total soil bacterial community structure but, unlike amendment of the mineral/arable soil, maintained genetic diversity, based on polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) analysis targeting DNA and RNA, until week 9 of the perturbation experiment. Assuming equivalent toxicity, the genetic diversity of the naturally more diverse soil was more resistant to benzene perturbation than the less diverse soil. The broad scale function (mineralization of 14C-labelled wheat shoot) of both benzene- and copper-treated soil communities was unaffected. However, narrow niche function (mineralization of 14C-labelled 2,4-dichlorophenol) was impaired for both benzene-polluted soils. The organo-mineral soil recovered this function by the end of the experiment but the mineral soil did not, suggesting greater resilience in the more diverse soil. Despite a large reduction in bacterial numbers and biomass in the copper-treated soils, only small differences in bacterial community diversity were observed by week 9 in the copper-polluted soils. The overall community structure was little altered and functionality, measured by mineralization rates, remained unchanged. This suggested a non-selective pressure and a degree of genetic and functional resistance to copper perturbation, despite a significant reduction in bacterial numbers and biomass. However, initial shifts in physiological profiles of both copper-polluted soils were observed but rapidly returned to those of the controls. This apparent functional recovery, accompanied by an increase in culturability, possibly reflects adaptation by the surviving communities to perturbation. The findings indicate that, although soil communities may be robust, relationships between diversity and stability need to be considered in developing a predictive understanding of response to environmental perturbations.

Ecotoxicological evaluation of diesel-contaminated soil before and after a bioremediation process

Evaluation of contaminated sites is usually performed by chemical analysis of pollutants in soil. This is not enough either to evaluate the environmental risk of contaminated soil nor to evaluate the efficiency of soil cleanup techniques. Information on the bioavailability of complex mixtures of xenobiotics and degradation products cannot be totally provided by chemical analytical data, but results from bioassays can integrate the effects of pollutants in complex mixtures. In the preservation of human health and environment quality, it is important to assess the ecotoxicological effects of contaminated soils to obtain a better evaluation of the healthiness of this system. The monitoring of a diesel-contaminated soil and the evaluation of a bioremediation technique conducted on a microcosm scale were performed by a battery of ecotoxicological tests including phytotoxicity, Daphnia magna, and nematode assays. In this study we biostimulated the native microflora of soil contaminated with diesel by adding nutrients and crop residue (corn straw) as a bulking agent and as a source of microorganisms and nutrients; in addition, moisture was adjusted to enhance diesel removal. The bioremediation process efficiency was evaluated directly by an innovative, simple phytotoxicity test system and the diesel extracts by Daphnia magna and nematode assays. Contaminated soil samples were revealed to have toxic effects on seed germination, seedling growth, and Daphnia survival. After biostimulation, the diesel concentration was reduced by 50.6%, and the soil samples showed a significant reduction in phytotoxicity (9%-15%) and Daphnia assays (3-fold), confirming the effectiveness of the bioremediation process. Results from our microcosm study suggest that in addition to the evaluation of the bioremediation processes efficiency, toxicity testing is different with organisms representative of diverse phylogenic levels. The integration of analytical, toxicological and bioremediation data is necessary to properly assess the ecological risk of bioremediation processes.

Changes in soil microbial community composition induced by cometabolism of toluene and trichloroethylene

The effects of trichloroethylene (TCE) on microbial community composition were analyzed by reverse sample genome probing. Soil enrichments were incubated in dessicators containing an organic phase of either 1 or 10% (w/w) toluene in vacuum pump oil, delivering constant equilibrium aqueous concentrations of 16 and 143 mg/l, respectively. Increasing the equilibrium aqueous concentration of TCE from 0 to 10 mg/l led to shifts in community composition at 16, but not at 143 mg/l of toluene. In closed system co-degradation studies, TCE at an aqueous concentration of 1 mg/l was effectively degraded by toluene-degrading soil enrichments once the aqueous toluene concentration dropped below 25 mg/l. Little TCE degradation was observed at higher toluene concentrations (50-250 mg/l). The results indicate that TCE changes microbial community composition under conditions where it is being actively metabolized.

Microbial population dynamics at effluent treatment plants

The requirements for treated wastewater are becoming increasingly more stringent, and therefore the improved efficiency of biological treatment processes is indispensable at industrial effluent treatment plants (ETPs). Microorganisms such as bacteria play an important role in the natural cycling of materials and particularly in the decomposition of organic wastes. The knowledge of the interactions among these microbial populations needs to be harnessed for optimum evaluation and functioning of effluent treatment plants. Modern molecular techniques have revolutionized the methods of assessing these microbial populations. The combination of the results of these microbial assessments along with the on-site parameters at ETPs would favor an efficient treatment. In this review, the various approaches and importance of correlating the microbial population dynamics and treatment of wastewater at industrial ETPs has been elaborated.

Methods of studying soil microbial diversity

Soil microorganisms, such as bacteria and fungi, play central roles in soil fertility and promoting plant health. This review examines and compares the various methods used to study microbial diversity in soil.

Bacterial succession in a petroleum land treatment unit

Bacterial community dynamics were investigated in a land treatment unit (LTU) established at a site contaminated with highly weathered petroleum hydrocarbons in the C(10) to C(32) range. The treatment plot, 3,000 cubic yards of soil, was supplemented with nutrients and monitored weekly for total petroleum hydrocarbons (TPH), soil water content, nutrient levels, and aerobic heterotrophic bacterial counts. Weekly soil samples were analyzed with 16S rRNA gene terminal restriction fragment (TRF) analysis to monitor bacterial community structure and dynamics during bioremediation. TPH degradation was rapid during the first 3 weeks and slowed for the remainder of the 24-week project. A sharp increase in plate counts was reported during the first 3 weeks, indicating an increase in biomass associated with petroleum degradation. Principal components analysis of TRF patterns revealed a series of sample clusters describing bacterial succession during the study. The largest shifts in bacterial community structure began as the TPH degradation rate slowed and the bacterial cell counts decreased. For the purpose of analyzing bacterial dynamics, phylotypes were generated by associating TRFs from three enzyme digests with 16S rRNA gene clones. Two phylotypes associated with Flavobacterium and Pseudomonas were dominant in TRF patterns from samples during rapid TPH degradation. After the TPH degradation rate slowed, four other phylotypes gained dominance in the community while Flavobacterium and Pseudomonas phylotypes decreased in abundance. These data suggest that specific phylotypes of bacteria were associated with the different phases of petroleum degradation in the LTU.

Biodegradation of C5+ hydrocarbons by a mixed bacterial consortium from a C(5+)-contaminated site

C5+, a mixture of benzene, toluene, xylene, styrene, dicyclopentadiene (DCPD), naphthalene and other compounds, is a byproduct of polyethylene production and has been introduced into the environment via accidental release. The degradation of C5+ was studied using a defined consortium of 11 distinct bacterial strains isolated from C(5+)-contaminated soil. Vigorous growth of individual strains on C5+ was no prediction of dominance in the consortium, when the latter was grown under the same conditions. The defined consortium was able to degrade benzene, toluene, styrene and naphthalene, and to codegrade m-xylene in the presence of toluene or naphthalene. It was unable to degrade DCPD, which was inhibitory when degradation of pairs of C5+ components was examined. The complete C5+ mixture appeared to be the best substrate for the consortium.

Investigation of bacterial diversity in Brazilian tropical estuarine sediments reveals high actinobacterial diversity

Phylogenetic and statistical analyses of 16S rRNA gene libraries were used for the investigation of actinobacterial communities present in two tropical estuarine sediments (Santos-São Vicente estuary, Brazil). The libraries were constructed from samples collected at the brackish end of the estuary, highly hydrocarbon-contaminated, and at the marine end, uncontaminated. Clones from the marine end of the estuary were all related to sequences from non-cultured Actinobacteria and unidentified bacteria recovered from a wide range of environmental samples, whereas clones from the brackish end were mainly related to sequences from cultured Actinobacteria. Statistical analyses showed that the community recovered from the hydrocarbon-contaminated sediment sample, at the brackish end, was less diverse than the uncontaminated one, at the marine end, and that the communities from the two libraries were differently structured, suggesting that these may have not originated from the same community. The recognition of the spatial pattern of actinobacterial distribution in a natural environment is a first step towards understanding the way these communities are organized, providing valuable data for further investigations of their taxonomic and functional diversity.

Analysis of environmental microbial communities by reverse sample genome probing

Development of fast and accurate methods for monitoring environmental microbial diversity is one of the great challenges in microbiology today. Oligonucleotide probes based on 16S rRNA sequences are widely used to identify bacteria in the environment. However, the successful development of a chip of immobilized 16S rRNA probes for identification of large numbers of species in a single hybridization step has not yet been reported. In reverse sample genome probing (RSGP), labelled total community DNA is hybridized to arrays in which genomes of cultured microorganisms are spotted on a solid support in denatured form. This method has provided useful information on changes in composition of the cultured component of microbial communities in oil fields, the soil rhizhosphere, hydrocarbon-contaminated soils and acid mine drainage sites. Applications and limitations of the method, as well as the prospects of extending RSGP to cover also the as yet uncultured component of microbial communities, are evaluated.

Biokinetic modeling of in situ bioremediation of BTX compounds-impact of process variables and scaleup implications

The impact of three process parameters, i.e. ground water velocity, oxygen-to-BTX mass ratio, and benzene, toluene and xylene (BTX) concentrations on first-order biodegradation kinetics in a pilot-scale in situ bioremediation system was assessed. Generally, first-order biodegradation coefficients decreased with ground water velocity, and increased with hydrogen peroxide dose and BTX concentration. First-order biodegradation rate coefficients for benzene, toluene, and o-xylene varied from 0.3 to 0.81, 0.24 to 0.72, and 0.21 to 0.63 d(-1), respectively. Biomass-specific first-order rate coefficients were insensitive to ground water velocity, and decreased with increasing BTX concentrations. At 10mg/l BTX concentration, the specific first-order coefficients increased with peroxide dose. However, at the 50mg/l BTX concentration and a peroxide dose of 1020 mg/l, a 30-70% reduction in specific first-order biodegradation coefficients was observed. BTX biodegradation kinetics in this pilot-scale system were approximately one-to-two orders of magnitude slower than in soil microcosms and mixed culture bioreactors, and about 200-300% higher than full-scale systems.

Ribosomal DNA-directed PCR for identification of Achromobacter (Alcaligenes) xylosoxidans recovered from sputum samples from cystic fibrosis patients

The opportunistic human pathogen Achromobacter (Alcaligenes) xylosoxidans has been recovered with increasing frequency from respiratory tract culture of persons with cystic fibrosis (CF). However, confusion of this species with other closely related respiratory pathogens has limited studies to better elucidate its epidemiology, natural history, and pathogenic role in CF. Misidentification of A. xylosoxidans as Burkholderia cepacia complex is especially problematic and presents a challenge to effective infection control in CF. To address the problem of accurate identification of A. xylosoxidans, we developed a PCR assay based on a 16S ribosomal DNA sequence. In an analysis of 149 isolates that included 47 A. xylosoxidans and several related glucose-nonfermenting species recovered from CF sputum, the sensitivity and specificity of this PCR assay were determined to be 100 and 97%, respectively. The availability of this assay will enhance identification of A. xylosoxidans, thereby facilitating study of the pathogenic role of this species and improving infection control efforts in CF.