Differential lipopolysaccharide core capping leads to quantitative and correlated modifications of mechanical and structural properties in Pseudomonas aeruginosa biofilms

Extracellular vesicles from Staphylococcus aureus promote the pathogenicity of Pseudomonas aeruginosa

Co-infections with Staphylococcus aureus and Pseudomonas aeruginosa are common in patients with chronic wounds, but little is known about their synergistic effect mediated by extracellular vesicles (EVs). In this study, we investigated the effect of EVs derived from S. aureus (SaEVs) on the pathogenicity of P. aeruginosa. By using lipophilic dye, we could confirm the fusion between SaEV and P. aeruginosa membranes. However, SaEVs did not alter the growth and antibiotic susceptible pattern of P. aeruginosa. Differential proteomic analysis between SaEV-treated and non-treated P. aeruginosa was performed, and the results revealed that lipopolysaccharide (LPS) biosynthesis protein in P. aeruginosa significantly increased after SaEV-treatment. Regarding this result, we also found that SaEVs promoted LPS production, biofilm formation, and expression of polysaccharide polymerization-related genes in P. aeruginosa. Furthermore, invasion of epithelial cells by SaEV-pretreated P. aeruginosa was enhanced. On the other hand, uptake of P. aeruginosa by RAW 264.7 macrophages was impaired after pretreatment P. aeruginosa with SaEVs. Proteomic analysis SaEVs revealed that SaEVs contain the proteins involving in host cell colonization, inhibition of host immune response, anti-phagocytosis of the macrophages, and protein translocation and iron uptake of S. aureus. In conclusion, SaEVs serve as a mediator that promote P. aeruginosa pathogenicity by enhancing LPS biosynthesis, biofilm formation, epithelial cell invasion, and macrophage uptake impairment.

High prevalence of lipopolysaccharide mutants and R2-pyocin susceptible variants in Pseudomonas aeruginosa populations sourced from cystic fibrosis lung infections

IMPORTANCE

Cystic fibrosis (CF) patients often experience chronic, debilitating lung infections caused by antibiotic-resistant Pseudomonas aeruginosa, contributing to antimicrobial resistance (AMR). The genetic and phenotypic diversity of P. aeruginosa populations in CF lungs raises questions about their susceptibility to non-traditional antimicrobials, like bacteriocins. In this study, we focused on R-pyocins, a type of bacteriocin with high potency and a narrow killing spectrum. Our findings indicate that a large number of infectious CF variants are susceptible to R2-pyocins, even within diverse bacterial populations, supporting their potential use as therapeutic agents. The absence of a clear correlation between lipopolysaccharide (LPS) phenotypes and R-pyocin susceptibility suggests that LPS packing density may play a significant role in R-pyocin susceptibility among CF variants. Understanding the relationship between LPS phenotypes and R-pyocin susceptibility is crucial for developing effective treatments for these chronic infections.

Genetic and Phenotypic Analysis of Phage-Resistant Mutant Fitness Triggered by Phage-Host Interactions

The emergence of phage-resistant bacterial strains is one of the biggest challenges for phage therapy. However, the emerging phage-resistant bacteria are often accompanied by adaptive trade-offs, which supports a therapeutic strategy called "phage steering". The key to phage steering is to guide the bacterial population toward an evolutionary direction that is favorable for treatment. Thus, it is important to systematically investigate the impacts of phages targeting different bacterial receptors on the fitness of the bacterial population. Herein, we employed 20 different phages to impose strong evolutionary pressure on the host Pseudomonas aeruginosa PAO1 and examined the genetic and phenotypic responses of their phage-resistant mutants. Among these strains with impaired adsorptions, four types of mutations associated with bacterial receptors were identified, namely, lipopolysaccharides (LPSs), type IV pili (T4Ps), outer membrane proteins (OMPs), and exopolysaccharides (EPSs). PAO1, responding to LPS- and EPS-dependent phage infections, mostly showed significant growth impairment and virulence attenuation. Most mutants with T4P-related mutations exhibited a significant decrease in motility and biofilm formation ability, while the mutants with OMP-related mutations required the lowest fitness cost out of the bacterial populations. Apart from fitness costs, PAO1 strains might lose their resistance to antibiotics when counteracting with phages, such as the presence of large-fragment mutants in this study, which may inspire the usage of phage-antibiotic combination strategies. This work provides methods that leverage the merits of phage resistance relative to obtaining therapeutically beneficial outcomes with respect to phage-steering strategies.

Altering Microbiomes with Hydroxyapatite Nanoparticles: A Metagenomic Analysis

Hydroxyapatite (HAp), the most abundant biological material among mammals, has been recently demonstrated to possess moderate antibacterial properties. Metagenomics provides a series of tools for analyzing the simultaneous interaction of materials with larger communities of microbes, which may aid in optimizing the antibacterial activity of a material such as HAp. Here, a microbiome intrinsic to the sample of sandy soil collected from the base of an African Natal plum (Carissa macrocarpa) shrub surrounding the children's sandbox at the Arrowhead Park in Irvine, California was challenged with HAp nanoparticles and analyzed with next-generation sequencing for hypervariable 16S ribosomal DNA base pair homologies. HAp nanoparticles overwhelmingly reduced the presence of Gram-negative phyla, classes, orders, families, genera and species, and consequently elevated the relative presence of their Gram-positive counterparts. Thermodynamic, electrostatic and chemical bonding arguments were combined in a model proposed to explain this selective affinity. The ability of amphiphilic surface protrusions of lipoteichoic acid in Gram-positive bacteria and mycolic acid in mycobacteria to increase the dispersibility of the bacterial cells and assist in their resistance to capture by the solid phase is highlighted. Within the Gram-negative group, the variability of the distal, O-antigen portion of the membrane lipopolysaccharide was shown to be excessive and the variability of its proximal, lipid A portion insufficient to explain the selectivity based on chemical sequence arguments. Instead, flagella-driven motility proves to be a factor favoring the evasion of binding to HAp. HAp displayed a preference toward binding to less pathogenic bacteria than those causative of disease in humans, while taxa having a positive agricultural effect were largely captured by HAp, indicating an evolutionary advantage this may have given it as a biological material. The capacity to selectively sequester Gram-negative microorganisms and correspondingly alter the composition of the microbiome may open up a new avenue in environmental and biomedical applications of HAp.

Host lysolipid differentially modulates virulence factor expression and antimicrobial susceptibility in Pseudomonas aeruginosa

Lysophosphatidic acid (LPA) occurs naturally in inflammatory exudates and has previously been shown to increase the susceptibility of Pseudomonas aeruginosa to β-lactam antibiotics whilst concomitantly reducing accumulation of the virulence factors pyoverdine and elastase. Here it is demonstrated that LPA can also exert inhibitory effects upon pyocyanin production in P. aeruginosa, as well as influencing susceptibility to a wide range of chemically diverse non β-lactam antimicrobials. Most strikingly, LPA markedly antagonizes the effect of the polycationic antibiotics colistin and tobramycin at a concentration of 250 µg ml^-1 whilst conversely enhancing their efficacy at the lower concentration of 8.65 µg ml^-1, approximating the maximal physiological concentrations found in inflammatory exudates. Transcriptomic responses of the virulent strain UCBPP-PA14 to LPA were analysed using RNA-sequencing along with BioLog phenoarrays and whole cell assays in attempts to delineate possible mechanisms underlying these effects. The results strongly suggest involvement of LPA-induced carbon catabolite repression together with outer-membrane (OM) stress responses whilst raising questions about the effect of LPA upon other P. aeruginosa virulence factors including type III secretion. This could have clinical relevance as it suggests that endogenous LPA may, at concentrations found in vivo, differentially modulate antibiotic susceptibility of P. aeruginosa whilst simultaneously regulating expression of virulence factors, thereby influencing host-pathogen interactions during infection. The possibility of applying exogenous LPA locally as an enhancer of select antibiotics merits further investigation.

Regulation of Biofilm Exopolysaccharide Biosynthesis and Degradation in Pseudomonas aeruginosa

Microbial communities enmeshed in a matrix of macromolecules, termed as biofilms, are the natural setting of bacteria. Exopolysaccharide is a critical matrix component of biofilms. Here, we focus on biofilm matrix exopolysaccharides in Pseudomonas aeruginosa. This opportunistic pathogen can adapt to a wide range of environments and can form biofilms or aggregates in a variety of surfaces or environments, such as the lungs of people with cystic fibrosis, catheters, wounds, and contact lenses. The ability to synthesize multiple exopolysaccharides is one of the advantages that facilitate bacterial survival in different environments. P. aeruginosa can produce several exopolysaccharides, including alginate, Psl, Pel, and lipopolysaccharide. In this review, we highlight the roles of each exopolysaccharide in P. aeruginosa biofilm development and how bacteria coordinate the biosynthesis of multiple exopolysaccharides and bacterial motility. In addition, we present advances in antibiofilm strategies targeting matrix exopolysaccharides, with a focus on glycoside hydrolases.

Expected final online publication date for the Annual Review of Microbiology, Volume 76 is September 2022. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Adaptation and phenotypic diversification of Bacillus thuringiensis biofilm are accompanied by fuzzy spreader morphotypes

Bacillus cereus group (Bacillus cereus sensu lato) has a diverse ecology, including various species that produce biofilms on abiotic and biotic surfaces. While genetic and morphological diversification enables the adaptation of multicellular communities, this area remains largely unknown in the Bacillus cereus group. In this work, we dissected the experimental evolution of Bacillus thuringiensis 407 Cry- during continuous recolonization of plastic beads. We observed the evolution of a distinct colony morphotype that we named fuzzy spreader (FS) variant. Most multicellular traits of the FS variant displayed higher competitive ability versus the ancestral strain, suggesting an important role for diversification in the adaptation of B. thuringiensis to the biofilm lifestyle. Further genetic characterization of FS variant revealed the disruption of a guanylyltransferase gene by an insertion sequence (IS) element, which could be similarly observed in the genome of a natural isolate. The evolved FS and the deletion mutant in the guanylyltransferase gene (Bt407ΔrfbM) displayed similarly altered aggregation and hydrophobicity compared to the ancestor strain, suggesting that the adaptation process highly depends on the physical adhesive forces.

Outer Membrane Protein F Is Involved in Biofilm Formation, Virulence and Antibiotic Resistance in Cronobacter sakazakii

In some Gram-negative bacteria, ompF encodes outer membrane protein F (OmpF), which is a cation-selective porin and is responsible for the passive transport of small molecules across the outer membrane. However, there are few reports about the functions of this gene in Cronobacter sakazakii. To investigate the role of ompF in detail, an ompF disruption strain (ΔompF) and a complementation strain (cpompF) were successfully obtained. We find that OmpF can affect the ability of biofilm formation in C. sakazakii. In addition, the variations in biofilm composition of C. sakazakii were examined using Raman spectroscopy analyses caused by knocking out ompF, and the result indicated that the levels of certain biofilm components, including lipopolysaccharide (LPS), were significantly decreased in the mutant (ΔompF). Then, SDS-PAGE was used to further analyze the LPS content, and the result showed that the LPS levels were significantly reduced in the absence of ompF. Therefore, we conclude that OmpF affects biofilm formation in C. sakazakii by reducing the amount of LPS. Furthermore, the ΔompF mutant showed decreased (2.7-fold) adhesion to and invasion of HCT-8 cells. In an antibiotic susceptibility analysis, the ΔompF mutant showed significantly smaller inhibition zones than the WT, indicating that OmpF had a positive effect on the influx of antibiotics into the cells. In summary, ompF plays a positive regulatory role in the biofilm formation and adhesion/invasion, which is achieved by regulating the amount of LPS, but is a negative regulator of antibiotic resistance in C. sakazakii.

Evolving Populations in Biofilms Contain More Persistent Plasmids

Bacterial plasmids substantially contribute to the rapid spread of antibiotic resistance, which is a crisis in healthcare today. Coevolution of plasmids and their hosts promotes this spread of resistance by ameliorating the cost of plasmid carriage. However, our knowledge of plasmid–bacteria coevolution is solely based on studies done in well-mixed liquid cultures, even though biofilms represent the main way of bacterial life on Earth and are responsible for most infections. The spatial structure and the heterogeneity provided by biofilms are known to lead to increased genetic diversity as compared with well-mixed liquids. Therefore, we expect that growth in this complex environment could affect the evolutionary trajectories of plasmid–host dyads. We experimentally evolved Shewanella oneidensis MR-1 with plasmid pBP136Gm in biofilms and chemostats and sequenced the genomes of clones and populations. Biofilm populations not only maintained a higher diversity of mutations than chemostat populations but contained a few clones with markedly more persistent plasmids that evolved via multiple distinct trajectories. These included the acquisition of a putative toxin–antitoxin transposon by the plasmid and chromosomal mutations. Some of these genetic changes resulted in loss of plasmid transferability or decrease in plasmid cost. Growth in chemostats led to a higher proportion of variants with decreased plasmid persistence, a phenomenon not detected in biofilms. We suggest that the presence of more stable plasmid–host dyads in biofilms reflects higher genetic diversity and possibly unknown selection pressures. Overall, this study underscores the importance of the mode of growth in the evolution of antibiotic-resistant bacteria.

Diversity of Bacteria and Bacterial Products as Antibiofilm and Antiquorum Sensing Drugs Against Pathogenic Bacteria

The increase in antibiotic resistance of pathogenic bacteria has led to the development of new therapeutic approaches to inhibit biofilm formation as well as interfere quorum sensing (QS) signaling systems. The QS system is a phenomenon in which pathogenic bacteria produce signaling molecules that are involved in cell to cell communication, production of virulence factors, biofilm maturation, and several other functions. In the natural environment, several non-pathogenic bacteria are present as mixed population along with pathogenic bacteria and they control the behavior of microbial community by producing secondary metabolites. Similarly, non-pathogenic bacteria also take advantages of the QS signaling molecule as a sole carbon source for their growth through catabolism with enzymes. Several enzymes are produced by bacteria which disrupt the biofilm architecture by degrading the composition of extracellular polymeric substances (EPS) such as exopolysaccharide, extracellular- DNA and protein. Thus, the interference of QS system by bacterial metabolic products and enzymatic catalysis, modification of the QS signaling molecules as well as enzymatic disruption of biofilm architecture have been considered as the alternative therapeutic approaches. This review article elaborates on the diversity of different bacterial species with respect to their metabolic products as well as enzymes and their molecular modes of action. The bacterial enzymes and metabolic products will open new and promising perspectives for the development of strategies against the pathogenic bacterial infections.

Emergence of a Synergistic Diversity as a Response to Competition in Pseudomonas putida Biofilms

Genetic diversification through the emergence of variants is one of the known mechanisms enabling the adaptation of bacterial communities. We focused in this work on the adaptation of the model strain Pseudomonas putida KT2440 in association with another P. putida strain (PCL1480) recently isolated from soil to investigate the potential role of bacterial interactions in the diversification process. On the basis of colony morphology, three variants of P. putida KT2440 were obtained from co-culture after 168 h of growth whereas no variant was identified from the axenic KT2440 biofilm. The variants exhibited distinct phenotypes and produced biofilms with specific architecture in comparison with the ancestor. The variants better competed with the P. putida PCL1480 strain in the dual-strain biofilms after 24 h of co-culture in comparison with the ancestor. Moreover, the synergistic interaction of KT2440 ancestor and the variants led to an improved biofilm production and to higher competitive ability versus the PCL1480 strain, highlighting the key role of diversification in the adaptation of P. putida KT2440 in the mixed community. Whole genome sequencing revealed mutations in polysaccharides biosynthesis protein, membrane transporter, or lipoprotein signal peptidase genes in variants.

Fluorescence Spectroscopy Analysis of the Bacteria-Mineral Interface: Adsorption of Lipopolysaccharides to Silica and Alumina

We present here a quantification of the sorption process and molecular conformation involved in the attachment of bacterial cell wall lipopolysaccharides (LPSs), extracted from Escherichia coli, to silica (SiO₂) and alumina (Al₂O₃) particles. We propose that interfacial forces govern the physicochemical interactions of the bacterial cell wall with minerals in the natural environment, and the molecular conformation of LPS cell wall components depends on both the local charge at the point of binding and hydrogen bonding potential. This has an effect on bacterial adaptation to the host environment through adhesion, growth, function, and ability to form biofilms. Photophysical techniques were used to investigate adsorption of fluorescently labeled LPS onto mineral surfaces as model systems for bacterial attachment. Adsorption of macromolecules in dilute solutions was studied as a function of pH and ionic strength in the presence of alumina and silica via fluorescence, potentiometric, and mass spectrometry techniques. The effect of silica and alumina particles on bacterial growth as a function of pH was also investigated using spectrophotometry. The alumina and silica particles were used to mimic active sites on the surface of clay and soil particles, which serve as a point of attachment of bacteria in natural systems. It was found that LPS had a high adsorption affinity for Al₂O₃ while adsorbing weakly to SiO₂ surfaces. Strong adsorption was observed at low pH for both minerals and varied with both pH and mineral concentration, likely in part due to conformational rearrangement of the LPS macromolecules. Bacterial growth was also enhanced in the presence of the particles at low pH values. This demonstrates that at a molecular level, bacterial cell wall components are able to adapt their conformation, depending on the solution pH, in order to maximize attachment to substrates and guarantee community survival.

Hybrid Model of Bacterial Biofilm Growth

Bacterial biofilms play a critical role in environmental processes, water treatment, human health, and food processing. They exhibit highly complex dynamics due to the interactions between the bacteria and the extracellular polymeric substance (EPS), water, and nutrients and minerals that make up the biofilm. We present a hybrid computational model in which the dynamics of discrete bacterial cells are simulated within a multiphase continuum, consisting of EPS and water as separate interacting phases, through which nutrients and minerals diffuse. Bacterial cells in our model consume water and nutrients in order to grow, divide, and produce EPS. Consequently, EPS flows outward from the bacterial colony, while water flows inward. The model predicts bacterial colony formation as a treelike structure. The distribution of bacterial growth and EPS production is found to be sensitive to the pore spacing between bacteria and the consumption of nutrients within the bacterial colony. Forces that are sometimes neglected in biofilm simulations, such as lubrication force between nearby bacterial cells and osmotic (swelling) pressure force resulting from gradients in EPS concentration, are observed to have an important effect on biofilm growth via their influence on bacteria pore spacing and associated water/nutrient percolation into the bacterial colony.

The Role of Pseudomonas aeruginosa Lipopolysaccharide in Bacterial Pathogenesis and Physiology

The major constituent of the outer membrane of Gram-negative bacteria is lipopolysaccharide (LPS), which is comprised of lipid A, core oligosaccharide, and O antigen, which is a long polysaccharide chain extending into the extracellular environment. Due to the localization of LPS, it is a key molecule on the bacterial cell wall that is recognized by the host to deploy an immune defence in order to neutralize invading pathogens. However, LPS also promotes bacterial survival in a host environment by protecting the bacteria from these threats. This review explores the relationship between the different LPS glycoforms of the opportunistic pathogen Pseudomonas aeruginosa and the ability of this organism to cause persistent infections, especially in the genetic disease cystic fibrosis. We also discuss the role of LPS in facilitating biofilm formation, antibiotic resistance, and how LPS may be targeted by new antimicrobial therapies.

Glutathione Activates Type III Secretion System Through Vfr in Pseudomonas aeruginosa

Glutathione (GSH) is the most abundant antioxidant in all living organisms. Previously, we have shown that a deletion mutant in the glutathione synthetase gene (ΔgshB) decreases the expression of type III secretion system (T3SS) genes of Pseudomonas aeruginosa. However, the mechanism remains elusive. In this study, a comprehensive transcriptomic analysis of the GSH-deficient mutant ΔgshAΔgshB was used to elucidate the role of GSH in the pathogenesis of P. aeruginosa. The data show that the expression of genes in T3SS, type VI secretion system (T6SS) and some regulatory genes were impaired. ΔgshAΔgshB was attenuated in a mouse model of acute pneumonia, swimming and swarming motilities, and biofilm formation. Under T3SS inducing conditions, GSH enhanced the expression of T3SS in both wild-type PAO1 and ΔgshAΔgshB, but not in Δvfr. Genetic complementation of Δvfr restored the ability of GSH to induce the expression of T3SS genes. Site-directed mutagenesis based substitution of cysteine residues with alanine in Vfr protein abolished the induction of T3SS genes by GSH, confirming that GSH regulates T3SS genes through Vfr. Exposure to H₂O₂ decreased free thiol content on Vfr, indicating that the protein was sensitive to redox modification. Importantly, GSH restored the oxidized Vfr to reduced state. Collectively, these results suggest that GSH serves as an intracellular redox signal sensed by Vfr to upregulate T3SS expression in P. aeruginosa. Our work provides new insights into the role of GSH in P. aeruginosa pathogenesis.

From molecules to multispecies ecosystems: the roles of structure in bacterial biofilms

Biofilms are communities of sessile microbes that are bound to each other by a matrix made of biopolymers and proteins. Spatial structure is present in biofilms on many lengthscales. These range from the nanometer scale of molecular motifs to the hundred-micron scale of multicellular aggregates. Spatial structure is a physical property that impacts the biology of biofilms in many ways. The molecular structure of matrix components controls their interaction with each other (thereby impacting biofilm mechanics) and with diffusing molecules such as antibiotics and immune factors (thereby impacting antibiotic tolerance and evasion of the immune system). The size and structure of multicellular aggregates, combined with microbial consumption of growth substrate, give rise to differentiated microenvironments with different patterns of metabolism and gene expression. Spatial association of more than one species can benefit one or both species, while distances between species can both determine and result from the transport of diffusible factors between species. Thus, a widespread theme in the biological importance of spatial structure in biofilms is the effect of structure on transport. We survey what is known about this and other effects of spatial structure in biofilms, from molecules up to multispecies ecosystems. We conclude with an overview of what experimental approaches have been developed to control spatial structure in biofilms and how these and other experiments can be complemented with computational work.

Conformation of Single and Interacting Lipopolysaccharide Surfaces Bearing O-Side Chains

The outer surfaces of Gram-negative bacteria are composed of lipopolysaccharide (LPS) molecules exposing oligo- and polysaccharides to the aqueous environment. This unique, structurally complex biological interface is of great scientific interest as it mediates the interaction of bacteria with antimicrobial agents as well as with neighboring bacteria in colonies and biofilms. Structural studies on LPS surfaces, however, have so far dealt almost exclusively with rough mutant LPS of reduced molecular complexity and limited biological relevance. Here, by using neutron reflectometry, we structurally characterize planar monolayers of wild-type LPS from Escherichia coli O55:B5 featuring strain-specific O-side chains in the presence and absence of divalent cations and under controlled interaction conditions. The model used for the reflectivity analysis is self-consistent and based on the volume fraction profiles of all chemical components. The saccharide profiles are found to be bimodal, with dense inner oligosaccharides and more dilute, extended O-side chains. For interacting LPS monolayers, we establish the pressure-distance curve and determine the distance-dependent saccharide conformation.

Cell Autoaggregation, Biofilm Formation, and Plant Attachment in a Sinorhizobium meliloti lpsB Mutant

Bacterial surface molecules are crucial for the establishment of a successful rhizobia-legume symbiosis, and, in most bacteria, are also critical for adherence properties, surface colonization, and as a barrier for defense. Rhizobial mutants defective in the production of exopolysaccharides (EPSs), lipopolysaccharides (LPSs), or capsular polysaccharides are usually affected in symbiosis with their plant hosts. In the present study, we evaluated the role of the combined effects of LPS and EPS II in cell-to-cell and cell-to-surface interactions in Sinorhizobium meliloti by studying planktonic cell autoaggregation, biofilm formation, and symbiosis with the host plant Medicago sativa. The lpsB mutant, which has a defective core portion of LPS, exhibited a reduction in biofilm formation on abiotic surfaces as well as altered biofilm architecture compared with the wild-type Rm8530 strain. Atomic force microscopy and confocal laser microscopy revealed an increase in polar cell-to-cell interactions in the lpsB mutant, which might account for the biofilm deficiency. However, a certain level of biofilm development was observed in the lpsB strain compared with the EPS II-defective mutant strains. Autoaggregation experiments carried out with LPS and EPS mutant strains showed that both polysaccharides have an impact on the cell-to-cell adhesive interactions of planktonic bacteria. Although the lpsB mutation and the loss of EPS II production strongly stimulated early attachment to alfalfa roots, the number of nodules induced in M. sativa was not increased. Taken together, this work demonstrates that S. meliloti interactions with biotic and abiotic surfaces depend on the interplay between LPS and EPS II.

Towards standardized mechanical characterization of microbial biofilms: analysis and critical review

Developing reliable anti-biofilm strategies or efficient biofilm-based bioprocesses strongly depends on having a clear understanding of the mechanisms underlying biofilm development, and knowledge of the relevant mechanical parameters describing microbial biofilm behavior. Many varied mechanical testing methods are available to assess these parameters. The mechanical properties thus identified can then be used to compare protocols such as antibiotic screening. However, the lack of standardization in both mechanical testing and the associated identification methods for a given microbiological goal remains a blind spot in the biofilm community. The pursuit of standardization is problematic, as biofilms are living structures, i.e., both complex and dynamic. Here, we review the main available methods for characterizing the mechanical properties of biofilms through the lens of the relationship linking experimental testing to the identification of mechanical parameters. We propose guidelines for characterizing biofilms according to microbiological objectives that will help the reader choose an appropriate test and a relevant identification method for measuring any given mechanical parameter. The use of a common methodology for the mechanical characterization of biofilms will enable reliable analysis and comparison of microbiological protocols needed for improvement of engineering process and screening.

Structural investigation by tandem mass spectrometry analysis of a heterogeneous mixture of Lipid An isolated from the lipopolysaccharide of Aeromonas hydrophila SJ-55Ra

RATIONALE

We report herein the electrospray ionization mass spectrometry (ESI-MS) negative ion mode and low-energy collision-induced dissociation tandem mass spectrometry (CID-MS/MS) analysis of a mixture of lipid A_n isolated from the lipopolysaccharide (LPS) of a rough-resistant wild strain of the Gram-negative bacteria Aeromonas hydrophila grown in the presence of phages (SJ-55Ra). This investigation indicates that the presence of a mixture of lipid A acylated disaccharides, whose molecular structures were not relatively conserved, resulted from the incomplete LPS biosynthesis caused by the phage treatment.

METHODS

The heterogeneous lipid A_n mixture from the LPS-SJ55Ra was obtained following growth of the Gram-negative bacteria Aeromonas hydrophila (SJ-55R) in the presence of phages and isolation by the aqueous phenol method. Following hydrolysis and purification of the lipopolysaccharide, ESI-MS and low-energy CID-MS/MS analyses were performed on a triple-quadrupole (QqQ) and a Fourier transform ion cyclotron resonance (FTICR) instrument.

RESULTS

ESI-MS analysis suggested that this lipid A_n mixture contained eight molecular disaccharide anions and three monosaccharide anions. This series of lipid A_n was asymmetrically substituted with ((R)-14:0(3-OH)) fatty acids located at O-3 and N-2 and with branched fatty acids: (Cl4:0(3-(R)-O-C14:0)) and (C12:0(3-(R)-O-(14:0)) at the O-3' and N-2' positions.

CONCLUSIONS

Tandem mass spectrometric analyses allowed the exact determination of the fatty acid acylation locations on the D-GlcpN disaccharide. The MS/MS results established that it was possible to selectively cleave C-O, C-N, and C-C bonds, together with glycosidic C-O and cross-ring cleavages, affording excellent structural analysis of lipid A biomolecules.

Novel role of the LPS core glycosyltransferase WapH for cold adaptation in the Antarctic bacterium Pseudomonas extremaustralis

Psychrotroph microorganisms have developed cellular mechanisms to cope with cold stress. Cell envelopes are key components for bacterial survival. Outer membrane is a constituent of Gram negative bacterial envelopes, consisting of several components, such as lipopolysaccharides (LPS). In this work we investigated the relevance of envelope characteristics for cold adaptation in the Antarctic bacterium Pseudomonas extremaustralis by analyzing a mini Tn5 wapH mutant strain, encoding a core LPS glycosyltransferase. Our results showed that wapH strain is impaired to grow under low temperature but not for cold survival. The mutation in wapH, provoked a strong aggregative phenotype and modifications of envelope nanomechanical properties such as lower flexibility and higher turgor pressure, cell permeability and surface area to volume ratio (S/V). Changes in these characteristics were also observed in the wild type strain grown at different temperatures, showing higher cell flexibility but lower turgor pressure under cold conditions. Cold shock experiments indicated that an acclimation period in the wild type is necessary for cell flexibility and S/V ratio adjustments. Alteration in cell-cell interaction capabilities was observed in wapH strain. Mixed cells of wild type and wapH strains, as well as those of the wild type strain grown at different temperatures, showed a mosaic pattern of aggregation. These results indicate that wapH mutation provoked marked envelope alterations showing that LPS core conservation appears as a novel essential feature for active growth under cold conditions.

A Versatile Method for the Distance-Dependent Structural Characterization of Interacting Soft Interfaces by Neutron Reflectometry

Interactions between soft interfaces govern the behavior of emulsions and foams and crucially influence the functions of biological entities like membranes. To understand the character of these interactions, detailed insight into the interfaces' structural response in terms of molecular arrangements and conformations is often essential. This requires the realization of controlled interaction conditions and surface-sensitive techniques capable of resolving the structure of buried interfaces. Here, we present a new approach to determine the distance-dependent structure of interacting soft interfaces by neutron reflectometry. A solid/water interface and a water/oil interface are functionalized independently and initially macroscopically separated. They are then brought into contact and structurally characterized under interacting conditions. The nanometric distance between the two interfaces can be varied via the exertion of osmotic pressures. Our first experiments on lipid-anchored polymer brushes interacting across water with solid-grafted polyelectrolyte brushes and with bare silicon surfaces reveal qualitatively different interaction scenarios depending on the chemical composition of the two involved interfaces.

Changes in the lipopolysaccharide of Proteus mirabilis 9B-m (O11a) clinical strain in response to planktonic or biofilm type of growth

The impact of planktonic and biofilm lifestyles of the clinical isolate Proteus mirabilis 9B-m on its lipopolysaccharide (O-polysaccharide, core region, and lipid A) was evaluated. Proteus mirabilis bacteria are able to form biofilm and lipopolysaccharide is one of the factors involved in the biofilm formation. Lipopolysaccharide was isolated from planktonic and biofilm cells of the investigated strain and analyzed by SDS–PAGE with silver staining, Western blotting and ELISA, as well as NMR and matrix-assisted laser desorption ionization time-of-flight mass spectrometry techniques. Chemical and NMR spectroscopic analyses revealed that the structure of the O-polysaccharide of P. mirabilis 9B-m strain did not depend on the form of cell growth, but the full-length chains of the O-antigen were reduced when bacteria grew in biofilm. The study also revealed structural modifications of the core region in the lipopolysaccharide of biofilm-associated cells—peaks assigned to compounds absent in cells from the planktonic culture and not previously detected in any of the known Proteus core oligosaccharides. No differences in the lipid A structure were observed. In summary, our study demonstrated for the first time that changes in the lifestyle of P. mirabilis bacteria leads to the modifications of their important virulence factor—lipopolysaccharide.

Zinc oxide nanoparticle inhibits the biofilm formation of Streptococcus pneumoniae

Biofilms are structured consortia of microbial cells that grow on living and non living surfaces and surround themselves with secreted polymers. Infections with bacterial biofilms have emerged as a foremost public health concern because biofilm growing cells can be highly resistant to both antibiotics and host immune defenses. Zinc oxide nanoparticles have been reported as a potential antimicrobial agent, thus, in the current study, we have evaluated the antimicrobial as well as antibiofilm activity of zinc oxide nanoparticles against the bacterium Streptococcus pneumoniae which is a significant cause of disease. Zinc oxide nanoparticles showed strong antimicrobial activity against S. pneumoniae, with an MIC value of 40 μg/ml. Biofilm inhibition of S. pneumoniae was also evaluated by performing a series of experiments such as crystal violet assay, microscopic observation, protein count, EPS secretion etc. using sub-MIC concentrations (3, 6 and 12 µg/ml) of zinc oxide nanoparticles. The results showed that the sub-MIC doses of zinc oxide nanoparticles exhibited significant anti-biofilm activity against S. pneumoniae, with maximum biofilm attenuation found at 12 μg/ml. Taken together, the results indicate that zinc oxide nanoparticles can be considered as a potential agent for the inhibition of microbial biofilms.

Neutron reflectometry yields distance-dependent structures of nanometric polymer brushes interacting across water

The interaction between surfaces displaying end-grafted hydrophilic polymer brushes plays important roles in biology and in many wet-technological applications. In this context, the conformation of the brushes upon their mutual approach is crucial, because it affects interaction forces and the brushes' shear-tribological properties. While this aspect has been addressed by theory, experimental data on polymer conformations under confinement are difficult to obtain. Here, we study interacting planar brushes of hydrophilic polymers with defined length and grafting density. Via ellipsometry and neutron reflectometry we obtain pressure-distance curves and determine distance-dependent polymer conformations in terms of brush compression and reciprocative interpenetration. While the pressure-distance curves are satisfactorily described by the Alexander-de-Gennes model, the pronounced brush interpenetration as seen by neutron reflectometry motivates detailed simulation-based studies capable of treating brush interpenetration on a quantitative level.

Pathogenic factors of Pseudomonas aeruginosa – the role of biofilm in pathogenicity and as a target for phage therapy

<i>Pseudomonas</i> aeruginosa is an opportunistic pathogen that can cause several acute and chronic infections in humans, and it has become an important cause of nosocomial infections and antibiotic resistance. Biofilm represents an important virulence factor for these bacteria, plays a role in <i>P. aeruginosa</i> infections and avoidance of immune defence mechanisms, and has the ability to protect the bacteria from antibiotics. Alginate, Psl and Pel, three exopolysaccharides, are the main components in biofilm matrix, with many biological functions attributed to them, especially with respect to the protection of the bacterial cell from antibiotics and the immune system. <i>Pseudomonas</i> infections, biofilm formation and development of resistance to antibiotics all require better understanding to achieve the best results using alternative treatment with phage therapy. This review describes the <i>P. aeruginosa</i> pathogenicity and virulence factors with a special focus on the biofilm and its role in infection and resistance to antibiotics and summarizes phage therapy as an alternative approach in treatment of <i>P. aeruginosa</i> infections.

3-Amino-4-aminoximidofurazan derivatives: small molecules possessing antimicrobial and antibiofilm activity against Staphylococcus aureus and Pseudomonas aeruginosa

AIM

The therapeutic treatment of microbial infections involving biofilm becomes quite challenging because of its increasing antibiotic resistance capacities. Towards this direction, in the present study we have evaluated the antibiofilm property of synthesized 3-amino-4-aminoximidofurazan compounds having polyamine skeleton. These derivatives were synthesized by incorporating furazan and biguanide moieties.

METHODS AND RESULTS

Different 3-amino-4-aminoximidofurazan derivatives (PI1-4) were synthesized via protic acid catalysis and subsequently characterized by (1) H NMR and (13) C NMR spectra, recorded at 400 and 100 MHz respectively. We have tested the antimicrobial and antibiofilm activities of these synthetic derivatives (PI1-4) against both Staphylococcus aureus and Pseudomonas aeruginosa. The compounds so tested were also compared with standard antibiotics namely Tobramycin (Ps. aeruginosa) and Azithromycin (Staph. aureus) which were used as a positive control in all experimental sets. All these compounds (PI1-4) exhibited moderate to significant antimicrobial activities against both micro-organisms wherein compound PI3 showed maximum activity. Biofilm inhibition of both micro-organisms was then evaluated by crystal violet and safranin staining, estimation of biofilm total protein and microscopy methods using sub-MIC dose of these compounds. Results showed that all compounds executed anti biofilm activity against both Staph. aureus and Ps. aeruginosa wherein compound PI3 exhibited maximum activity. In relation with microbial biofilm inhibition, we have observed reduction in bacterial motility, proteolytic activity and secreted exo-polysaccharide (EPS) from both Staph. aureus and Ps. aeruginosa when they were grown in presence of these compounds. While addressing the issue of toxicity on host, we have observed that these molecules exhibited minimum level of R.B.C degradation.

CONCLUSION

These findings establish the antibacterial and anti biofilm properties of 3-amino-4-aminoximidofurazan derivatives (PI1-4).

SIGNIFICANCE AND IMPACT OF THE STUDY

Therefore, our current findings demonstrate that 3-amino-4-aminoximidofurazan derivatives (PI1-4) may hold promise to be effective biofilm and microbial inhibitors that may be clinically significant.

Water-Mediated Interactions between Hydrophilic and Hydrophobic Surfaces

All surfaces in water experience at short separations hydration repulsion or hydrophobic attraction, depending on the surface polarity. These interactions dominate the more long-ranged electrostatic and van der Waals interactions and are ubiquitous in biological and colloidal systems. Despite their importance in all scenarios where the surface separation is in the nanometer range, the origin of these hydration interactions is still unclear. Using atomistic solvent-explicit molecular dynamics simulations, we analyze the interaction free energies of charge-neutral model surfaces with different elastic and water-binding properties. The surface polarity is shown to be the most important parameter that not only determines the hydration properties and thereby the water contact angle of a single surface but also the surface-surface interaction and whether two surfaces attract or repel. Elastic properties of the surfaces are less important. On the basis of surface contact angles and surface-surface binding affinities, we construct a universal interaction diagram featuring three different interaction regimes-hydration repulsion, cavitation-induced attraction-and for intermediate surface polarities-dry adhesion. On the basis of scaling arguments and perturbation theory, we establish simple combination rules that predict the interaction behavior for combinations of dissimilar surfaces.

In Vitro Analysis of Pseudomonas aeruginosa Virulence Using Conditions That Mimic the Environment at Specific Infection Sites

Pseudomonas aeruginosa is a Gram-negative opportunistic pathogen that causes chronic lung infection in patients with cystic fibrosis (CF) and acute systemic infections in severely burned patients and immunocompromised patients including cancer patients undergoing chemotherapy and HIV infected individuals. In response to the environmental conditions at specific infection sites, P. aeruginosa expresses certain sets of cell-associated and extracellular virulence factors that produce tissue damage. Analyzing the mechanisms that govern the production of these virulence factors in vitro requires media that closely mimic the environmental conditions within the infection sites. In this chapter, we review studies based on media that closely resemble three in vivo conditions, the thick mucus accumulated within the lung alveoli of CF patients, the serum-rich wound bed and the bloodstream. Media resembling the CF alveolar mucus include standard laboratory media supplemented with sputum obtained from CF patients as well as prepared synthetic mucus media formulated to contain the individual components of CF sputum. Media supplemented with serum or individual serum components have served as surrogates for the soluble host components of wound infections, while whole blood has been used to investigate the adaptation of pathogens to the bloodstream. Studies using these media have provided valuable information regarding P. aeruginosa gene expression in different host environments as varying sets of genes were differentially regulated during growth in each medium. The unique effects observed indicate the essential role of these in vitro media that closely mimic the in vivo conditions in providing accurate information regarding the pathogenesis of P. aeruginosa infections.

Multiscale Model Describing Bacterial Adhesion and Detachment

Bacterial surfaces are complex structures with nontrivial adhesive properties. The physics of bacterial adhesion deviates from that of ideal colloids as a result of cell-surface roughness and because of the mechanical properties of the polymers covering the cell surface. In the present study, we develop a simple multiscale model for the interplay between the potential energy functions that characterize the cell surface biopolymers and their interaction with the extracellular environment. We then use the model to study a discrete network of bonds in the presence of significant length heterogeneities in cell-surface polymers. The model we present is able to generate force curves (both approach and retraction) that closely resemble those measured experimentally. Our results show that even small-length-scale heterogeneities can lead to macroscopically nonlinear behavior that is qualitatively and quantitatively different from the homogeneous case. We also report on the energetic consequences of such structural heterogeneity.

Mechanobiology of Antimicrobial Resistant Escherichia coli and Listeria innocua

A majority of antibiotic-resistant bacterial infections in the United States are associated with biofilms. Nanoscale biophysical measures are increasingly revealing that adhesive and viscoelastic properties of bacteria play essential roles across multiple stages of biofilm development. Atomic Force Microscopy (AFM) applied to strains with variation in antimicrobial resistance enables new opportunities for investigating the function of adhesive forces (stickiness) in biofilm formation. AFM force spectroscopy analysis of a field strain of Listeria innocua and the strain Escherichia coli K-12 MG1655 revealed differing adhesive forces between antimicrobial resistant and nonresistant strains. Significant increases in stickiness were found at the nanonewton level for strains of Listeria innocua and Escherichia coli in association with benzalkonium chloride and silver nanoparticle resistance respectively. This advancement in the usage of AFM provides for a fast and reliable avenue for analyzing antimicrobial resistant cells and the molecular dynamics of biofilm formation as a protective mechanism.

Surface polysaccharides and quorum sensing are involved in the attachment and survival of Xanthomonas albilineans on sugarcane leaves

Xanthomonas albilineans, the causal agent of sugarcane leaf scald, is a bacterial plant pathogen that is mainly spread by infected cuttings and contaminated harvesting tools. However, some strains of this pathogen are known to be spread by aerial means and are able to colonize the phyllosphere of sugarcane before entering the host plant and causing disease. The objective of this study was to identify the molecular factors involved in the survival or growth of X. albilineans on sugarcane leaves. We developed a bioassay to test for the attachment of X. albilineans on sugarcane leaves using tissue-cultured plantlets grown in vitro. Six mutants of strain XaFL07-1 affected in surface polysaccharide production completely lost their capacity to survive on the sugarcane leaf surface. These mutants produced more biofilm in vitro and accumulated more cellular poly-β-hydroxybutyrate than the wild-type strain. A mutant affected in the production of small molecules (including potential biosurfactants) synthesized by non-ribosomal peptide synthetases (NRPSs) attached to the sugarcane leaves as well as the wild-type strain. Surprisingly, the attachment of bacteria on sugarcane leaves varied among mutants of the rpf gene cluster involved in bacterial quorum sensing. Therefore, quorum sensing may affect polysaccharide production, or both polysaccharides and quorum sensing may be involved in the survival or growth of X. albilineans on sugarcane leaves.

A detailed guideline for the fabrication of single bacterial probes used for atomic force spectroscopy

The atomic force microscope (AFM) evolved as a standard device in modern microbiological research. However, its capability as a sophisticated force sensor is not used to its full capacity. The AFM turns into a unique tool for quantitative adhesion research in bacteriology by using "bacterial probes". Thereby, bacterial probes are AFM cantilevers that provide a single bacterium or a cluster of bacteria as the contact-forming object. We present a step-by-step protocol for preparing bacterial probes, performing force spectroscopy experiments and processing force spectroscopy data. Additionally, we provide a general insight into the field of bacterial cell force spectroscopy.

Trophic regulation of autoaggregation in Pseudomonas taiwanensis VLB120

Five mutants of Pseudomonas taiwanensis VLB120ΔCeGFP showed significant autoaggregation when growing on defined carbohydrates or gluconate, while they grew as suspended cells on complex medium and on organic acids like citrate and succinate. Surprisingly, the respective mutations affected very different genes, although all five strains exhibited the same behaviour of aggregate formation. To elucidate the mechanism of the aggregative behaviour, the microbial adhesion to hydrocarbons (MATH) assay and contact angle measurements were performed that pointed to an increased cell surface hydrophobicity. Moreover, investigations of the outer layer of the cell membrane revealed a reduced amount of O-specific polysaccharides in the lipopolysaccharide of the mutant cells. To determine the regulation of the aggregation, reverse transcription quantitative real-time PCR was performed and, irrespective of the mutation, the transcription of a gene encoding a putative phosphodiesterase, which is degrading the global second messenger cyclic diguanylate, was decreased or even deactivated in all mutants. In summary, it appears that the trophic autoaggregation was regulated via cyclic diguanylate and a link between the cellular cyclic diguanylate concentration and the lipopolysaccharide composition of P. taiwanensis VLB120ΔCeGFP is suggested.

Crystal structure of LptH, the periplasmic component of the lipopolysaccharide transport machinery from Pseudomonas aeruginosa

Lipopolysaccharide (LPS) is the main glycolipid present in the outer leaflet of the outer membrane (OM) of Gram-negative bacteria, where it modulates OM permeability, therefore preventing many toxic compounds from entering the cell. LPS biogenesis is an essential process in Gram-negative bacteria and thus is an ideal target pathway for the development of novel specific antimicrobials. The lipopolysaccharide transport (Lpt) system is responsible for transporting LPS from the periplasmic surface of the inner membrane, where it is assembled, to the cell surface where it is then inserted in the OM. The Lpt system has been widely studied in Escherichia coli, where it consists of seven essential proteins located in the inner membrane (LptBCFG), in the periplasm (LptA) and in the OM (LptDE). In the present study, we focus our attention on the Pseudomonas aeruginosa PAO1 Lpt system. We identified an LptA orthologue, named LptH, and solved its crystal structure at a resolution of 2.75 Å. Using interspecies complementation and site-directed mutagenesis of a conserved glycine residue, we demonstrate that P. aeruginosa LptH is the genetic and functional homologue of E. coli LptA, with whom it shares the β-jellyroll fold identified also in other members of the canonical E. coli Lpt model system. Furthermore, we modeled the N-terminal β-jellyroll domain of P. aeruginosa LptD, based on the crystal structure of its homologue from Shigella flexneri, aiming to provide more general insight into the mechanism of LPS binding and transport in P. aeruginosa. Both LptH and LptD may represent new targets for the discovery of next generation antibacterial drugs, targeting specific opportunistic pathogens such as P. aeruginosa.

DATABASE

Coordinates and structure factors have been deposited in the Protein Data Bank under accession number PDB 4uu4.

Polymyxin B resistance and biofilm formation in Vibrio cholerae are controlled by the response regulator CarR

Two-component systems play important roles in the physiology of many bacterial pathogens. Vibrio cholerae's CarRS two-component regulatory system negatively regulates expression of vps (Vibrio polysaccharide) genes and biofilm formation. In this study, we report that CarR confers polymyxin B resistance by positively regulating expression of the almEFG genes, whose products are required for glycine and diglycine modification of lipid A. We determined that CarR directly binds to the regulatory region of the almEFG operon. Similarly to a carR mutant, strains lacking almE, almF, and almG exhibited enhanced polymyxin B sensitivity. We also observed that strains lacking almE or the almEFG operon have enhanced biofilm formation. Our results reveal that CarR regulates biofilm formation and antimicrobial peptide resistance in V. cholerae.

Mechanical and cell-to-cell adhesive properties of aggregated Methanosarcina

The mechanical and adhesive properties as well as the turgor pressure of microbes play an important role in cell growth and aggregation. By applying AFM together with finite element modelling, one can determine the cell wall structural homogeneity, mechanical and cell-to-cell adhesive properties for aggregated Methanosarcina barkeri cells. This also allows a novel approach to determine in-aggregate turgor pressure determination. Analyzing the AFM force-indentation response of the aggregates under loads less than 10 nN, our study reveals structural inhomogeneity of the polymeric part of the cell wall material and suggests that the cell wall consists of two layers of methanochondroitin (external: with a thickness of 3 ± 1 nm and internal: with a thickness of 169 ± 30 nm). On average, the hyperelastic finite element model showed that the internal layer is more rigid (μ = 14 ± 4 MPa) than the external layer (μ = 2.8 ± 0.9 MPa). To determine the turgor pressure and adhesiveness of the cells, a specific mode of indentation (under a load of 45 nN), aimed towards the centre of the individual aggregate, was performed. By modelling the AFM induced decohesion of the aggregate, the turgor pressure and the cell-to-cell adhesive interface properties could be determined. On average, the turgor pressure is estimated to be 59 ± 22 kPa, the interface strength is 78 ± 12 kPa and the polymer network extensibility is 2.8 ± 0.9 nm. We predict that internal cell wall comprised highly compressed methanochondroitin chains and we are able to identify a conceptual model for stress dependent inner cell wall growth.

Controlling mechanisms in directional growth of aggregated archaeal cells

Members of the family Methanosarcinaceae are important archaeal representatives due to their broad functionality, ubiquitous presence, and functionality in harsh environments. A key characteristic is their multicellular (packet) morphology represented by aggregates of spatially confined cells. This morphology is driven by directed growth of cells in confinement with sequential variation in growth direction. To further understand why spatially confined Methanosarcina cells (and in general, confined prokaryotes) change their direction of growth during consecutive growth-division stages, and how a particular cell senses its wall topology and responds to changes on it a theoretical model for stress dependent growth of aggregated archaeal cells was developed. The model utilizes a confined elastic shell representation of aggregated archaeal cell and is derived based on a work-energy principle. The growth law takes into account the fine structure of archaeal cell wall, polymeric nature of methanochondroitin layer, molecular-biochemical processes and is based on thermodynamic laws. The developed model has been applied to three typical configurations of aggregated cell in 3D. The developed model predicted a geometry response with delayed growth of aggregated archaeal cells explained from mechanistic principles, as well as continuous changes in direction of growth during the consecutive growth-division stages. This means that cell wall topology sensing and growth anisotropy can be predicted using simple cellular mechanisms without the need for dedicated cellular machinery.

Biofouling of reverse osmosis membranes: positively contributing factors of Sphingomonas

In the present study, we investigate the possible contribution of Sphingomonas spp. glycosphingolipids (GSL) and its extracellular polymeric substances (EPS) to the initial colonization and development of biofilm bodies on reverse osmosis (RO) membranes. A combination of an RO cross-flow membrane lab unit, a quartz crystal microbalance with dissipation (QCM-D), and a rear stagnation point flow (RSPF) system with either model bacteria (Sphingomonas wittichii, Escherichia coli, and Pseudomonas aeruginosa) or vesicles made of the bacterial GSL or LPS was used. Results showed noticeable differences in the adhesion LPS versus GSL vesicles in the QCM-D, with the latter exhibiting 50% higher adhesion to polyamide coated crystals (mimicking an RO membrane surface). A similar trend was observed for EPS extracted from S. wittichii, when compared to the adhesion tendency of EPS extracted from P. aeruginosa. By applying the whole-cell approach in the RO lab unit, the cumulative impact of S. wittichii cells composing GSL and probably their EPS reduced the permeate flux during bacterial accumulation on the membrane surface. Experiments were conducted with the same amount of Sphingomonas spp. or Escherichia coli cells resulting in a two times greater flux decline in the presence of S. wittichii. The distinct effects of Sphingomonas spp. on RO membrane biofouling are likely a combination of GSL presence (known for enhancing adhesion when compared to non-GSL containing bacteria) and the EPS contributing to the overall strength of the biofilm matrix.

Lipopolysaccharide O-chain core region required for cellular cohesion and compaction of in vitro and root biofilms developed by Rhizobium leguminosarum

The formation of biofilms is an important survival strategy allowing rhizobia to live on soil particles and plant roots. Within the microcolonies of the biofilm developed by Rhizobium leguminosarum, rhizobial cells interact tightly through lateral and polar connections, forming organized and compact cell aggregates. These microcolonies are embedded in a biofilm matrix, whose main component is the acidic exopolysaccharide (EPS). Our work shows that the O-chain core region of the R. leguminosarum lipopolysaccharide (LPS) (which stretches out of the cell surface) strongly influences bacterial adhesive properties and cell-cell cohesion. Mutants defective in the O chain or O-chain core moiety developed premature microcolonies in which lateral bacterial contacts were greatly reduced. Furthermore, cell-cell interactions within the microcolonies of the LPS mutants were mediated mostly through their poles, resulting in a biofilm with an altered three-dimensional structure and increased thickness. In addition, on the root epidermis and on root hairs, O-antigen core-defective strains showed altered biofilm patterns with the typical microcolony compaction impaired. Taken together, these results indicate that the surface-exposed moiety of the LPS is crucial for proper cell-to-cell interactions and for the formation of robust biofilms on different surfaces.

Analysis of the mechanical stability and surface detachment of mature Streptococcus mutans biofilms by applying a range of external shear forces

Well-established biofilms formed by Streptococcus mutans via exopolysaccharide matrix synthesis are firmly attached to tooth surfaces. Enhanced understanding of the physical properties of mature biofilms may lead to improved approaches to detaching or disassembling these highly organized and adhesive structures. Here, the mechanical stability of S. mutans biofilms was investigated by determining their ability to withstand measured applications of shear stress using a custom-built device. The data show that the initial biofilm bulk (~ 50% biomass) was removed after exposure to 0.184 and 0.449 N m(-2) for 67 and 115 h old biofilms. However, removal of the remaining biofilm close to the surface was significantly reduced (vs initial bulk removal) even when shear forces were increased 10-fold. Treatment of biofilms with exopolysaccharide-digesting dextranase substantially compromised their mechanical stability and rigidity, resulting in bulk removal at a shear stress as low as 0.027 N m(-2) and > a two-fold reduction in the storage modulus (G'). The data reveal how incremental increases in shear stress cause distinctive patterns of biofilm detachment, while demonstrating that the exopolysaccharide matrix modulates the resistance of biofilms to mechanical clearance.

Segmented flow is controlling growth of catalytic biofilms in continuous multiphase microreactors

Biofilm reactors are often mass transfer limited due to excessive biofilm growth, impeding reactor performance. Fluidic conditions play a key role for biofilm structural development and subsequently for overall reactor performance. Continuous interfacial forces generated by aqueous-air segmented flow are controlling biofilm structure and diminish mass transfer limitations in biofilm microreactors. A simple three step method allows the formation of robust biofilms under aqueous-air segmented flow conditions: a first-generation biofilm is developing during single phase flow, followed by the introduction of air segments discarding most of the established biofilm. Finally, a second-generation, mature biofilm is formed in the presence of aqueous-air segments. Confocal laser scanning microscopy experiments revealed that the segmented flow supports the development of a robust biofilm. This mature biofilm is characterized by a three to fourfold increase in growth rate, calculated from an increase in thickness, a faster spatial distribution (95% surface coverage in 24 h), and a significantly more compact structure (roughness coefficient <1), as compared to biofilms grown under single phase flow conditions. The applicability of the concept in a segmented flow biofilm microreactor was demonstrated using the epoxidation of styrene to (S)-styrene oxide (ee > 99.8%) catalyzed by Pseudomonas sp. strain VLB120ΔC cells in the mono-species biofilm. The limiting factor affecting reactor performance was oxygen transfer as the volumetric productivity rose from 11 to 46 g L tube (-1) day(-1) after increasing the air flow rate. In summary, different interfacial forces can be applied for separating cell attachment and adaptation resulting in the development of a robust catalytic biofilm in continuous microreactors.

Nanomechanical response of bacterial cells to cationic antimicrobial peptides

The effectiveness of antimicrobial compounds can be easily screened, however their mechanism of action is much more difficult to determine. Many compounds act by compromising the mechanical integrity of the bacterial cell envelope, and our study introduces an AFM-based creep deformation technique to evaluate changes in the time-dependent mechanical properties of Pseudomonas aeruginosa PAO1 bacterial cells upon exposure to two different but structurally related antimicrobial peptides. We observed a distinctive signature for the loss of integrity of the bacterial cell envelope following exposure to the peptides. Measurements performed before and after exposure, as well as time-resolved measurements and those performed at different concentrations, revealed large changes to the viscoelastic parameters that are consistent with differences in the membrane permeabilizing effects of the peptides. The AFM creep deformation measurement provides new, unique insight into the kinetics and mechanism of action of antimicrobial peptides on bacteria.

Construction and characterization of an Escherichia coli mutant producing Kdo₂-lipid A

3-deoxy-D-manno-oct-2-ulosonic acid (Kdo)₂-lipid A is the conserved structure domain of lipopolysaccharide found in most Gram-negative bacteria, and it is believed to stimulate the innate immune system through the TLR4/MD2 complex. Therefore, Kdo₂-lipid A is an important stimulator for studying the mechanism of the innate immune system and for developing bacterial vaccine adjuvants. Kdo₂-lipid A has not been chemically synthesized to date and could only be isolated from an Escherichia coli mutant strain, WBB06. WBB06 cells grow slowly and have to grow in the presence of tetracycline. In this study, a novel E. coli mutant strain, WJW00, that could synthesize Kdo2-lipid A was constructed by deleting the rfaD gene from the genome of E. coli W3110. The rfaD gene encodes ADP-L-glycero-D-manno-heptose-6-epimerase RfaD. Based on the analysis by SDS-PAGE, thin layer chromatography (TLC) and electrospray ionization mass spectrometry (ESI/MS), WJW00 could produce similar levels of Kdo₂-lipid A to WBB06. WJW00 cells grow much better than WBB06 cells and do not need to add any antibiotics during growth. Compared with the wild-type strain, W3110, WJW00 showed increased hydrophobicity, higher cell permeability, greater autoaggregation and decreased biofilm-forming ability. Therefore, WJW00 could be a more suitable strain than WBB06 for producing Kdo₂-lipid A and a good base strain for developing lipid A adjuvants.