Stimulation of beta(1----3)glucan synthetase of various fungi by nucleoside triphosphates: generalized regulatory mechanism for cell wall biosynthesis

Comparative genomic and transcriptomic analysis of wangiella dermatitidis, a major cause of phaeohyphomycosis and a model black yeast human pathogen

Black or dark brown (phaeoid) fungi cause cutaneous, subcutaneous, and systemic infections in humans. Black fungi thrive in stressful conditions such as intense light, high radiation, and very low pH. Wangiella (Exophiala) dermatitidis is arguably the most studied phaeoid fungal pathogen of humans. Here, we report our comparative analysis of the genome of W. dermatitidis and the transcriptional response to low pH stress. This revealed that W. dermatitidis has lost the ability to synthesize alpha-glucan, a cell wall compound many pathogenic fungi use to evade the host immune system. In contrast, W. dermatitidis contains a similar profile of chitin synthase genes as related fungi and strongly induces genes involved in cell wall synthesis in response to pH stress. The large portfolio of transporters may provide W. dermatitidis with an enhanced ability to remove harmful products as well as to survive on diverse nutrient sources. The genome encodes three independent pathways for producing melanin, an ability linked to pathogenesis; these are active during pH stress, potentially to produce a barrier to accumulated oxidative damage that might occur under stress conditions. In addition, a full set of fungal light-sensing genes is present, including as part of a carotenoid biosynthesis gene cluster. Finally, we identify a two-gene cluster involved in nucleotide sugar metabolism conserved with a subset of fungi and characterize a horizontal transfer event of this cluster between fungi and algal viruses. This work reveals how W. dermatitidis has adapted to stress and survives in diverse environments, including during human infections.

Comparative proteomic analysis of mushroom cell wall proteins among the different developmental stages of Pleurotus tuber-regium

Cell wall proteins (CWPs) play a vital role in the development of the different morphological stages including mycelium, fruiting body, and sclerotium in mushrooms which are important human food sources. Using fractionation by detergents and reducing agents, mushroom cell wall fractions from the different developmental stages of Pleurotus tuber-regium (PTR) were prepared. Using one-dimensional gel electrophoresis coupled with LC-MS, there were 103, 91, and 48 noncovalently linked CWPs identified in the cell wall fractions of the PTR mycelium, fruiting body, and sclerotium, respectively. Comparing the CWPs in these cell wall fractions, 19 of them were in common, among which 17 belonged to the functional categories of translation, ribosomal structure, and biogenesis. This is the first study to provide important biochemical insights into the different developmental stages of PTR mediated by CWPs, and the identified CWPs helped to explain the morphological changes of PTR mushrooms during cultivation.

Histopathological events and detection of Metarhizium anisopliae using specific primers in infected immature stages of the fruit fly Anastrepha fraterculus (Wiedemann, 1830) (Diptera: Tephritidae)

The fungus Metarhizium anisopliae is used on a large scale in Brazil as a microbial control agent against the sugar cane spittlebugs, Mahanarva posticata and M. fimbriolata (Hemiptera., Cercopidae). We applied strain E9 of M. anisopliae in a bioassay on soil, with field doses of conidia to determine if it can cause infection, disease and mortality in immature stages of Anastrepha fraterculus, the South American fruit fly. All the events were studied histologically and at the molecular level during the disease cycle, using a novel histological technique, light green staining, associated with light microscopy, and by PCR, using a specific DNA primer developed for M. anisopliae capable to identify Brazilian strains like E9. The entire infection cycle, which starts by conidial adhesion to the cuticle of the host, followed by germination with or without the formation of an appressorium, penetration through the cuticle and colonisation, with development of a dimorphic phase, hyphal bodies in the hemocoel, and death of the host, lasted 96 hours under the bioassay conditions, similar to what occurs under field conditions. During the disease cycle, the propagules of the entomopathogenic fungus were detected by identifying DNA with the specific primer ITSMet: 5' TCTGAATTTTTTATAAGTAT 3' with ITS4 (5' TCCTCCGCTTATTGATATGC 3') as a reverse primer. This simple methodology permits in situ studies of the infective process, contributing to our understanding of the host-pathogen relationship and allowing monitoring of the efficacy and survival of this entomopathogenic fungus in large-scale applications in the field. It also facilitates monitoring the environmental impact of M. anisopliae on non-target insects.

Paracoccidioides brasiliensis and paracoccidioidomycosis: molecular approaches to morphogenesis, diagnosis, epidemiology, taxonomy and genetics

Paracoccidioides brasiliensis is an amenable model to study the molecular and biochemical events that lead to morphological transition in fungi, because temperature seems to be the only factor regulating this process. It is the causative agent of paracoccidioidomycosis, a systemic mycosis that affects humans and that is geographically confined to Latin America, where it constitutes one of the most prevalent deep mycoses. With the help of molecular tools, events leading to the morphological transition have been traced to genes that control cell wall glucan and chitin syntheses, and other metabolic processes such as production of heat shock proteins and ornithine decarboxylase activity. Molecular diagnosis and epidemiology of paracoccidioidomycosis are also the focus of intensive research, with several primers being proposed as specific probes for clinical and field uses. Although P. brasiliensis is refractory to cytogenetic analysis, electrophoretic methods have allowed an approximation of its genomic organization and ploidy. Finally, the recognition of P. brasiliensis as an anamorph in the phylum Ascomycota, order Onygenales, family Onygenaceae, has been accomplished by means of molecular tools. This phylogenetic placement has revised the taxonomic position of this fungus, which was traditionally included within now-abandoned higher anamorph taxa, the phylum Deuteromycota and the class Hyphomycetes.

bgs2+, a sporulation-specific glucan synthase homologue is required for proper ascospore wall maturation in fission yeast

The formation of the ascospore cell wall of Schizosaccharomyces pombe requires the co-ordinated activity of enzymes involved in the biosynthesis of its components, such as glucans. We have cloned the bgs2+ gene. bgs2+ belongs to the glucan synthase family of S. pombe and is homologous to the Saccharomyces cerevisiae FKS1 and FKS2 genes. Deletion or overexpression of this gene does not lead to any apparent defect during vegetative growth, but homozygous bgs2Delta diploids do show a sporulation defect. Although meiosis takes place normally, ascospores are unable to mature, and their wall differs from that of wild-type ascospores. Moreover, bgs2Delta zygotes were not able to release ascospores spontaneously, and the ascospores were unable to germinate. We show that expression of bgs2+ is restricted to sporulation and that a bgs2-green fluorescent protein (GFP) fusion protein localizes to the ascospore envelope. The glucan synthase activity in sporulating diploids bearing a bgs2 deletion was diminished in comparison with that of the wild-type diploids, a fact that underscores the importance of the bgs2+ gene and glucan synthesis for the proper formation and maturation of the ascospore wall.

Identification of a gene, SOO1, which complements osmo-sensitivity and defect in in vitro beta1,3-glucan synthase activity in Saccharomyces cerevisiae

The soo1-1 (for suppressor of osmo-sensitivity) mutation results in a temperature-dependent osmo-sensitive phenotype at non-permissive temperature (37 degrees C), makes yeast cells more susceptible to Zymolyase and affects in vitro beta1,3-glucan synthase activity level. Transformation of soo1-1 mutant by SOO1 gene reverses these effects. Nucleotide sequencing of SOO1 revealed that this gene is identical to the recently reported alpha-COP that is involved in the intracellular protein translocation from endoplasmic reticulum to Golgi and vice versa. Although the soo1-1 mutant strain showed osmotically remediable growth at 37 degrees C, SOO1 disruptants could not grow in any culture conditions. Analysis of cell wall fractions revealed that the soo1-1 mutation causes a decrease in in vitro beta1,3-glucan synthase activity, and, thus, a subsequent alteration of the cell wall composition.

Role of small G proteins in yeast cell polarization and wall biosynthesis

In the vegetative (mitotic) cycle and during sexual conjugation, yeast cells display polarized growth, giving rise to a bud or to a mating projection, respectively. In both cases one can distinguish three steps in these processes: choice of a growth site, organization of the growth site, and actual growth and morphogenesis. In all three steps, small GTP-binding proteins (G proteins) and their regulators play essential signaling functions. For the choice of a bud site, Bud1, a small G protein, Bud2, a negative regulator of Bud1, and Bud5, an activator, are all required. If any of them is defective, the cell loses its ability to select a proper bud position and buds randomly. In the organization of the bud site or of the site in which a mating projection appears, Cdc42, its activator Cdc24, and its negative regulators play a fundamental role. In the absence of Cdc42 or Cdc24, the actin cytoskeleton does not become organized and budding does not take place. Finally, another small G protein, Rho1, is required for activity of beta (1-->3)glucan synthase, the enzyme that catalyzes the synthesis of the major structural component of the yeast cell wall. In all of the above processes, G proteins can work as molecular switches because of their ability to shift between an active GTP-bound state and an inactive GDP-bound state.

Multiple copies of PBS2, MHP1 or LRE1 produce glucanase resistance and other cell wall effects in Saccharomyces cerevisiae

Five sequences were isolated by selection for multiple copy plasmids that conferred resistance to laminarinase, an enzyme that specifically degrades cell wall beta(1-3) glucan linkages. Strains carrying three of these plasmids showed alterations in cell wall glucan labelling. One of these plasmids carried PBS2, a previously identified, non-essential gene which produces a variety of phenotypes and encodes a mitogen-activated protein kinase kinase analogue (Boguslawski and Polazzi, 1987). Cells carrying PBS2 at multiple copy show a small decrease in cell wall beta(1-6) glucans. Measurements of beta(1-3) glucan synthase activity in multi-copy PBS2 cells showed an approximate 30-45% increase in enzyme specific activity while a pbs2 delta disruption strain showed a decrease in glucan synthase activity of approximately 45% relative to control. A pbs2 delta disruption strain was laminarinase super-sensitive and supersensitive to K1 killer toxin while a strain carrying PBS2 at multiple copy was resistant to killer toxin. A second plasmid carried a portion of the MHP1 gene which has been reported to encode a microtubule-interacting protein (Irminger-Finger et al., 1996). The MHP1 gene product is a predicted 1398 amino acid protein and only approximately 80% of the amino portion of this protein is required for laminarinase resistance. Cells carrying the amino portion of MHP1 at multiple copy show a decrease in high molecular weight cell wall beta(1-6) glucans and were killer toxin resistant while a disruption strain was viable and killer toxin super-sensitive. Cells carrying this plasmid showed decreased levels of high molecular weight beta(1-6) glucans and increased glucan synthase activity. The laminarinase resistance conferred by the third plasmid mapped to the previously uncharacterized YCL051W open reading frame and this gene was therefore named LRE1 (laminarinase resistance). The LRE1 gene encodes a non-essential 604 amino acid hydrophilic protein. Unexpectedly, cells carrying LRE1 at multiple copy show no alteration in cell wall glucans or glucan synthase activity. Subcloning experiments demonstrated that the production of these cell wall effects requires the presence of both LRE1 and YCL052C (PBN1), a second open reading frame present on the original plasmid. Cells carrying multiple copies of PBN1 alone show no significant alterations in cell wall glucans or glucan synthase activity, indicating that these effects require the presence of multiple copies of both genes.

In vitro activity of 1,3-beta-D-glucan synthase requires the GTP-binding protein Rho1

In the yeast Saccharomyces cerevisiae, the family of RHO genes are implicated in the control of morphogenetic events although the molecular targets of these GTP-binding proteins remain largely unknown. The activity of 1,3-beta-D-glucan synthase, the product of which is essential for cell wall integrity, is regulated by a GTP-binding protein, which we here present evidence to be Rho1p. Rho1p was found to copurify with Fks1p, a glucan synthase subunit, in preparations of the enzyme purified by product entrapment and was also shown to be depleted by a detergent extraction procedure known to remove the GTP-binding regulatory component. Specific ADP-ribosylation of Rho1p by exoenzyme C3 inactivates glucan synthase activity specified by FKS1 and FKS2 as demonstrated in membrane preparations from fks2 and fks1 deletion strains, respectively, and in the purified enzyme containing Fks1p. Rho1p and Fks1p were co-immunoprecipitated from purified glucan synthase under conditions that maintained enzyme activity in the immunoprecipitate. Putative Rho homologs were also identified and implicated in the regulation of glucan synthase activity from Candida albicans, Aspergillus nidulans, and Cryptococcus neoformans by ribosylation studies. The regulation of 1,3-beta-D-glucan synthase activity by RHO1 is consistent with its observed role in morphogenetic control and osmotic integrity.

Identification of yeast Rho1p GTPase as a regulatory subunit of 1,3-beta-glucan synthase

1,3-beta-D-glucan synthase [also known as beta(1-->3) glucan synthase] is a multi-enzyme complex that catalyzes the synthesis of 1,3-beta-linked glucan, a major structural component of the yeast cell wall. Temperature-sensitive mutants in the essential Rho-type guanosine triphosphatase (GTPase), Rho1p, displayed thermolabile glucan synthase activity, which was restored by the addition of recombinant Rho1p. Glucan synthase from mutants expressing constitutively active Rho1p did not require exogenous guanosine triphosphate for activity. Rho1p copurified with beta(1-->3)glucan synthase and associated with the Fks1p subunit of this complex in vivo. Both proteins were localized predominantly at sites of cell wall remodeling. Therefore, it appears that Rho1p is a regulatory subunit of beta(1-->3)glucan synthase.

High molecular weight precursors of glucans in Saccharomyces cerevisiae

Nascent beta-1,3 glucan synthesized by mixed membrane fractions from Saccharomyces cerevisiae was solubilized by extraction with hot SDS or urea. Nature of the material was analyzed by electrophoresis and gel filtration. As determined by gel filtration, Mr of synthesized glucans exceeded 1,500 kDa, but was below 20,000 kDa. This nascent material served as an acceptor for further glucose transfer reactions, giving rise to glucan molecules over 20,000 kDa. It is suggested that the high Mr precursor components represent protein-bound glucan molecules in transit to the cell surface.

Papulacandin B resistance in budding and fission yeasts: isolation and characterization of a gene involved in (1,3)beta-D-glucan synthesis in Saccharomyces cerevisiae

Papulacandin B, an antifungal agent that interferes with the synthesis of yeast cell wall (1,3)beta-D-glucan, was used to isolate resistant mutants in Schizosaccharomyces pombe and Saccharomyces cerevisiae. The resistance to papulacandin B always segregated as a recessive character that defines a single complementation group in both yeasts (pbr1+ and PBR1, respectively). Determination of several kinetic parameters of (1,3)beta-D-glucan synthase activity revealed no differences between S. pombe wild-type and pbr1 mutant strains except in the 50% inhibitory concentration for papulacandin B of the synthases (about a 50-fold increase in mutant activity). Inactivation of the synthase activity of both yeasts after in vivo treatment with the antifungal agent showed that mutant synthases were more resistant than the corresponding wild-type ones. Detergent dissociation of the S. pombe synthase into soluble and particulate fractions and subsequent reconstitution indicated that the resistance character of pbr1 mutants resides in the particulate fraction of the enzyme. Cloning and sequencing of PBR1 from S. cerevisiae revealed a gene identical to others recently reported (FKS1, ETG1, CWH53, and CND1). Its disruption leads to reduced levels of both (1,3)beta-D-glucan synthase activity and the alkali-insoluble cell wall fraction. Transformants containing the PBR1 gene reverse the defect in (1,3)beta-D-glucan synthase. It is concluded that Pbr1p is probably part of the (1,3)beta-D-glucan synthase complex.

Molecular basis of cell integrity and morphogenesis in Saccharomyces cerevisiae

In fungi and many other organisms, a thick outer cell wall is responsible for determining the shape of the cell and for maintaining its integrity. The budding yeast Saccharomyces cerevisiae has been a useful model organism for the study of cell wall synthesis, and over the past few decades, many aspects of the composition, structure, and enzymology of the cell wall have been elucidated. The cell wall of budding yeasts is a complex and dynamic structure; its arrangement alters as the cell grows, and its composition changes in response to different environmental conditions and at different times during the yeast life cycle. In the past few years, we have witnessed a profilic genetic and molecular characterization of some key aspects of cell wall polymer synthesis and hydrolysis in the budding yeast. Furthermore, this organism has been the target of numerous recent studies on the topic of morphogenesis, which have had an enormous impact on our understanding of the intracellular events that participate in directed cell wall synthesis. A number of components that direct polarized secretion, including those involved in assembly and organization of the actin cytoskeleton, secretory pathways, and a series of novel signal transduction systems and regulatory components have been identified. Analysis of these different components has suggested pathways by which polarized secretion is directed and controlled. Our aim is to offer an overall view of the current understanding of cell wall dynamics and of the complex network that controls polarized growth at particular stages of the budding yeast cell cycle and life cycle.

Interaction of sulfhydryl reactive reagents with components involved in (1,3)-beta-glucan synthesis from Candida albicans

Glucan synthesis was sensitive to several sulfhydryl reacting compounds: mercurials, reversible disulfides, and an alkylating sulfhydryl reagent (IC50 3-45 microM). Thiol groups associated with glucan synthesis were hydrophilic in nature, since both hydrophilic and hydrophobic reagents were active. Glucan synthase complex consists of at least two components: a peripheral GTP-binding protein that can be solubilized with detergents (supernatant) and the catalytic membrane-bound component (pellet). A rapid separation technique was developed to study sulfhydryl interactions with the complex. The GTP-binding protein was solubilized with 0.6% 3-((3-cholamidopropyl)dimethylammonio)-1-propane sulfonate from isolated microsomes of Candida albicans cells grown at either 10 or 30 degrees C. The residual membranous fraction contained the core catalytic moiety of glucan synthase. Both fractions were devoid of glucan synthase activity until they were reconstituted by mixing the two fractions together. In reconstitution experiments, the pellet lost almost 50% activity when preincubated with 2.5 microM N-ethylmaleimide and combined with an untreated supernatant whereas only 10% activity was lost when the supernatant was treated with N-ethylmaleimide. The catalytic active site of glucan synthase was not protected with UDP-Glc when preincubated with 10 microM N-ethylmaleimide but the GTP-binding fraction was partially protected with GTP gamma S.

Characterization and gene cloning of 1,3-beta-D-glucan synthase from Saccharomyces cerevisiae

1,3-beta-D-Glucan synthase of Saccharomyces cerevisiae was solubilized and purified up to 700-fold by product entrapment. The specific activity of the partially purified enzyme was around 4 mumol glucose incorporated.min-1.mg protein-1. In SDS/PAGE, enrichment of a 200-kDa protein was clearly observed in parallel with the increase in specific activity. mAbs that could immunoprecipitate the 1,3-beta-D-glucan synthase activity were isolated, and some of them also recognized this 200-kDa protein in the Western blot. Internal amino acid sequences of this 200-kDa protein were determined after lysyl endopeptidase digestion. With the information of these amino acid sequences, we cloned two genes, GSC1 and GSC2 (glucan synthase of S. cerevisiae 1 and 2), which are very similar to each other (88% at the amino acid level); hydropathy profiles of both proteins suggest that these genes encode integral membrane proteins which can be assumed to have approximately 16 transmembrane domains. Disruption of each gene was not lethal, but disruption of both genes was lethal. The 1,3-beta-D-glucan synthase activities of membrane and partially purified enzyme of gsc1::URA3 cells were significantly lower than those of the wild-type and gsc2::LEU2 cells.

A Saccharomyces cerevisiae mutant with echinocandin-resistant 1,3-beta-D-glucan synthase

A novel, potent, semisynthetic pneumocandin, L-733,560, was used to isolate a resistant mutant in Saccharomyces cerevisiae. This compound, like other pneumocandins and echinocandins, inhibits 1,3-beta-D-glucan synthase from Candida albicans (F.A. Bouffard, R.A. Zambias, J. F. Dropinski, J.M. Balkovec, M.L. Hammond, G.K. Abruzzo, K.F. Bartizal, J.A. Marrinan, M. B. Kurtz, D.C. McFadden, K.H. Nollstadt, M.A. Powles, and D.M. Schmatz, J. Med. Chem. 37:222-225, 1994). Glucan synthesis catalyzed by a crude membrane fraction prepared from the S. cerevisiae mutant R560-1C was resistant to inhibition by L-733,560. The nearly 50-fold increase in the 50% inhibitory concentration against glucan synthase was commensurate with the increase in whole-cell resistance. R560-1C was cross-resistant to other inhibitors of C. albicans 1,3-beta-D-glucan synthase (aculeacin A, dihydropapulacandin, and others) but not to compounds with different modes of action. Genetic analysis revealed that enzyme and whole-cell pneumocandin resistance was due to a single mutant gene, designated etg1-1 (echinocandin target gene 1), which was semidominant in heterozygous diploids. The etg1-1 mutation did not confer enhanced ability to metabolize L-733,560 and had no effect on the membrane-bound enzymes chitin synthase I and squalene synthase. Alkali-soluble beta-glucan synthesized by crude microsomes from R560-1C was indistinguishable from the wild-type product. 1,3-beta-D-Glucan synthase activity from R560-1C was fractionated with NaCl and Tergitol NP-40; reconstitution with fractions from wild-type membranes revealed that drug resistance is associated with the insoluble membrane fraction. We propose that the etg1-1 mutant gene encodes a subunit of the 1,3-beta-D-glucan synthase complex.

Inhibition of yeast (1,3)-beta-glucan synthase by phospholipase A2 and its reaction products

Fungal (1,3)-beta-glucan synthases are sensitive to a wide range of lipophilic inhibitors and it has been proposed that enzyme activity is highly sensitive to perturbations of the membrane environment. Yeast membranes were exposed to phospholipases and various lipophilic compounds, and the resultant effects on glucan synthase activity were ascertained. Glucan synthase from Saccharomyces cerevisiae was rapidly inactivated by phospholipase A2 (PLA2), and to a lesser extent by phospholipase C. Inactivation was time and dose-dependent and was protected against by EDTA and fatty-acid binding proteins (bovine and human serum albumins). Albumins also partially protected against inhibition by papulacandin B. PLA2 reaction products were structurally characterized and it was shown that fatty acids and lysophospholipids were the inhibitory moieties, with no novel inhibitory compounds apparent. Glucan synthase was inhibited by a range of fatty acids, monoglycerides and lysophospholipids. Inhibition by fatty acids was non-competitive, and progressive binding of [14C]oleic acid correlated with activity loss. Fluorescence anisotropy studies using diphenylhexatriene (DPH) confirm that fatty acids increase membrane fluidity. These results are consistent with proposals suggesting that glucan synthase inhibition is due in part to non-specific detergent-like disruption of the membrane environment, in addition to direct interactions of lipophilic inhibitors with specific target sites on the enzyme complex.

Morphological effects of lipopeptides against Aspergillus fumigatus correlate with activities against (1,3)-beta-D-glucan synthase

The lipopeptide antifungal agents, echinocandins, papulacandins, and pneumocandins, kill Candida albicans by inhibiting glucan synthesis. For this fungus, there is a good correlation of in vitro enzyme inhibition with in vitro assays of MICs. Semisynthetic lipopeptides such as cilofungin, LY303366, L-693,989, and L-733,560 have activity in vivo against Aspergillus infections but appear to be inactive in broth dilution in vitro tests (MICs, > 128 micrograms/ml). To understand how compounds which lack activity in vitro can have good in vivo activity, we monitored the effect of pneumocandins on the morphology of Aspergillus fumigatus and A, flavus strains by light microscopy and electron microscopy and related the changes in growth to inhibition of glucan synthesis. Pneumocandin B0 caused profound changes in hyphal growth; light micrographs showed abnormally swollen germ tubes, highly branched hyphal tips, and many cells with distended balloon shapes. Aspergillus electron micrographs confirmed that lipopeptides produce changes in cell walls; drug-treated germlings showed very stubby growth with thick walls and a conspicuous dark outer layer which was much thicker in the subapical regions. The rest of the hyphal tip ultrastructure was unaffected by the drug, indicating considerable specificity for the primary target. The drug-induced growth alteration produced very compact clumps in broth dilution wells, making it possible to score the morphological effect macroscopically. The morphological changes could be assayed quantitatively by using conventional broth microdilution susceptibility assay conditions. We defined the endpoint as the lowest concentration required to produce the morphological effect and called it the minimum effective concentration to distinguish it from the no-growth endpoints used in MIC determinations. The minimum effective concentration assay was related to inhibition of glucan synthase activity in vitro and may provide a starting point for development of susceptibility testing methods for lipopeptides.

Effect of the new fluorescent brightener Rylux BSU on morphology and biosynthesis of cell walls in Saccharomyces cerevisiae

Rylux BSU, a new fluorescent brightener from the family of 4,4'-diaminostilbene-2,2'disulfonic acid derivatives, inhibited growth and cytokinesis of the yeast Saccharomyces cerevisiae. In the presence of 0.1-1 mg/ml Rylux BSU the cells grew in clumps, had irregular shape and were larger than controls. They formed apparently normal primary septa but their secondary septa and lateral cell walls, especially those in older cells, were abnormally thick with large deposits of amorphous wall material in the periplasmic spaces all over the cell surface. Chitin content in the cell walls of cells grown in the presence of Rylux BSU was increased 2 to 5 times in comparison to that of the controls and glucan content was reduced by up to 30%. In the in vitro assays with particulate membrane fractions, Rylux BSU acted as a non-competitive inhibitor of beta-1,3-glucan synthase with inhibitory constant Ki = 1.75 mg/ml whereas the chitin synthase was inhibited to a much lesser extent. From the difference of the effects of Rylux BSU on the synthesis of chitin in vivo and in vitro it is concluded that the brightener interacts with chitin synthase only indirectly, possibly by influencing the properties of integral plasma membrane.

SKN1 and KRE6 define a pair of functional homologs encoding putative membrane proteins involved in beta-glucan synthesis

KRE6 encodes a predicted type II membrane protein which, when disrupted, results in a slowly growing, killer toxin-resistant mutant possessing half the normal level of a structurally wild-type cell wall (1-->6)-beta-glucan (T. Roemer and H. Bussey, Proc. Natl. Acad. Sci. USA 88:11295-11299, 1991). The mutant phenotype and structure of the KRE6 gene product, Kre6p, suggest that it may be a beta-glucan synthase component, implying that (1-->6)-beta-glucan synthesis in Saccharomyces cerevisiae is functionally redundant. To examine this possibility, we screened a multicopy genomic library for suppression of both the slow-growth and killer resistance phenotypes of a kre6 mutant and identified SKN1, which encodes a protein sharing 66% overall identity to Kre6p. SKN1 suppresses kre6 null alleles in a dose-dependent manner, though disruption of the SKN1 locus has no effect on killer sensitivity, growth, or (1-->6)-beta-glucan levels. skn1 kre6 double disruptants, however, showed a dramatic reduction in both (1-->6)-beta-glucan levels and growth rate compared with either single disruptant. Moreover, the residual (1-->6)-beta-glucan polymer in skn1 kre6 double mutants is smaller in size and altered in structure. Since single disruptions of these genes lead to structurally wild-type (1-->6)-beta-glucan polymers, Kre6p and Skn1p appear to function independently, possibly in parallel, in (1-->6)-beta-glucan biosynthesis.

SKN1 and KRE6 define a pair of functional homologs encoding putative membrane proteins involved in beta-glucan synthesis

KRE6 encodes a predicted type II membrane protein which, when disrupted, results in a slowly growing, killer toxin-resistant mutant possessing half the normal level of a structurally wild-type cell wall (1-->6)-beta-glucan (T. Roemer and H. Bussey, Proc. Natl. Acad. Sci. USA 88:11295-11299, 1991). The mutant phenotype and structure of the KRE6 gene product, Kre6p, suggest that it may be a beta-glucan synthase component, implying that (1-->6)-beta-glucan synthesis in Saccharomyces cerevisiae is functionally redundant. To examine this possibility, we screened a multicopy genomic library for suppression of both the slow-growth and killer resistance phenotypes of a kre6 mutant and identified SKN1, which encodes a protein sharing 66% overall identity to Kre6p. SKN1 suppresses kre6 null alleles in a dose-dependent manner, though disruption of the SKN1 locus has no effect on killer sensitivity, growth, or (1-->6)-beta-glucan levels. skn1 kre6 double disruptants, however, showed a dramatic reduction in both (1-->6)-beta-glucan levels and growth rate compared with either single disruptant. Moreover, the residual (1-->6)-beta-glucan polymer in skn1 kre6 double mutants is smaller in size and altered in structure. Since single disruptions of these genes lead to structurally wild-type (1-->6)-beta-glucan polymers, Kre6p and Skn1p appear to function independently, possibly in parallel, in (1-->6)-beta-glucan biosynthesis.

Increased transformation levels in intact cells of Saccharomyces cerevisiae aculeacin A-resistant mutants

Several Saccharomyces cerevisiae mutants resistant to the cell wall synthesis inhibitor aculeacin A exhibit higher transformation levels than the parental strain. Mutant acr2 has been studied in more detail. It is transformed up to ten-fold more efficiently than the wild-type strain with episomal, centromeric and integrative plasmids, and dimethyl sulfoxide has an additive effect improving transformation efficiency. Transformation with linear DNA molecules is not as much affected in acr2 cells. The observed effects may be caused by the altered plasma membrane composition of the mutants.

Tansley Review No. 45 Wall growth, protein excretion and morphogenesis in fungi

With the exception of the unicellular yeasts, fungi typically grow by means of hyphae that extend only at their apices and ramify into a mycelium. This mode of growth provides fungi with a certain mobility and the ability to invade dead and living organic substrata. They are thus the main decomposers of plant residues but they also have established intricate symbiotic relationships with plants, both mutualistic and parasitic. The process of apical growth of a hyphae requires the controlled expansion of the apical wall which must be transformed subsequently into a wall that resists turgor pressure and maintains the tubular shape of the hyphae. Although the driving force for hyphal extension is probably the turgor pressure, a subtle interplay between wall extension and cytoplasmic activity is necessary because only a precise gradient of wall-synthetic activity can maintain uniform wall thickness during expansion. Possibly, the presence in the plasma membrane of mechanico-sensitive proteins plays a role in conjunction with the cytoskeleton at the apex, particularly action. Although the major structural wall polysaccharides are probably manufactured directly on the expanding apical plasma membrane, proteins (and probably some wall components) are delivered to the growing surface by a continuous stream of exocytotic vesicles that fuse with the plasma membrane, at the same time extending its surface. Our analyses of the chemistry of the fungal wall and its biosynthesis and assemblage have disclosed a simple mechanism (though complex in detail) that may explain the transition from a newly formed expandable wall at the apex to a more rigid wall at the base of the hyphal extension zone. Two individual wall polymers, chitin and β-glucan, extruded at the apex are modified within the domain of the wall. Among the modifications observed are the formation of covalent crosslinks between these two polymers and hydrogen bonds between the homologous polymer chains, leading to the formation of chitin microfibrils crosslinked to a glucan matrix. This process is thought to convert an initially plastic wall into a rigid wall as the polymers fall behind the advancing tip. We have called this the steady-state growth theory for apical wall extension because a steady-state amount of plastic wall is always maintained at the growing apex. Excretion of lytic enzymes is a vital process in filamentous fungi because, in nature, they thrive on organic polymers which must be degraded extracellularly. Such enzymes are also necessary for infection processes. Cytological data suggest that such enzymes are extruded by the vesicles that continuously fuse with the plasma membrane at the growing apex. We have shown that a large portion of the excreted enzymes indeed leaves the hypha at the growing apex but another portion may be retained by the wall and is slowly released into the medium. In relation to the steady-state growth theory we hypothesize that enzymes can pass the wall at the apex by bulk flow, that is, by being carried by the flow of plastic wall material, making pores in the wall less important than previously thought. Proteins excreted by filamentous fungi not only serve dissimilatory purposes but are also important for a variety of other activities of the whole mycelium, including morphogenesis. By cloning genes abundantly expressed during formation of aerial hyphae and fruit bodies, we have discovered a class of proteins, named hydrophobins, which are only produced when the mycelium has reached a certain stage of maturity. Whilst excreted by submerged hyphae as monomers into the medium, they self-assemble as insoluble complexes in the walls of emergent hyphae. In aerial hyphae a particular hydrophobin takes the form of rodlets which probably coat the hyphae with an impermeable layer. During fruit-body formation other hydrophobins are produced which may function in the aggregation of hyphae to form a multicellular tissue. Apart from such specific morphogenetic functions, the hydrophobins may play a general role in insulating hyphae from the environment, converting the differentiating structures into sinks for translocation of water and nutrients from the assimilating mycelium. CONTENTS Summary I. Introduction 398 II. The hyphal mode of growth 399 III. Biogenesis of the wall fabric 400 IV. Wall growth until rigidification occurs 402 V. Biogenesis of the wall and protein excretion 404 VI. A role for wall proteins in morphogenesis 407 References 410.

Polyamines and cell wall organization in Saccharomyces cerevisiae

Cells of Saccharomyces cerevisiae 179-5, an ornithine decarboxylase mutant (spe-1), showed several ultrastructural abnormalities when cultivated in the absence of polyamines. Besides the appearance of microvacuole-like spaces in the cytoplasm and of deformed nuclei, the most important alterations seemed to be located in the cell wall, which was thicker and of heterogeneous texture, and in the cell membrane, of irregular contour. These modifications could not be evoked by general stress conditions elicited by lack of nutrients. The relative levels of cell wall polysaccharides were altered in polyamine-deprived organisms, giving an envelope with increased mannan and decreased glucan content; this cell wall was incompletely attacked by the lytic enzyme zymolyase. Polyamine depletion led also to some abnormalities in the budding pattern. The above observations suggest the involvement of polyamines in the correct structure and organization of the yeast cell.

Yeast beta-glucan synthesis: KRE6 encodes a predicted type II membrane protein required for glucan synthesis in vivo and for glucan synthase activity in vitro

The KRE6 gene product is required for synthesis of the major beta-glucans of the yeast cell wall, as mutations in this gene confer reduced levels of both the (1----6)- and (1----3)-beta-D-glucan polymers. Cloning and sequencing of KRE6 reveals a gene encoding a predicted 80-kDa protein with a central transmembrane domain and the topology of a type II membrane protein. Null mutants of KRE6 grow slowly, have larger cells, and show a reduction in alkali-insoluble wall glucans. The mutants show good viability and are not osmotically sensitive, but they are more susceptible to beta-glucanase digestion and mechanical stress than wild-type cells. The specific activity of the GTP-dependent, membrane-associated, in vitro (1----3)-beta-glucan synthase is reduced 50% in kre6 null mutants, and this reduction correlates with the mutation in meiotic tetrads. Transformants of kre6 null mutants with a KRE6 gene expressed from a centomere-based vector show a 4- to 5-fold increase in in vitro (1----3)-beta-glucan synthase activity over transformants with the vector alone. The phenotype and structure of the KRE6 product, Kre6p, suggest that Kre6p may be a beta-glucan synthase, and if so, it implies that beta-glucan synthases are functionally redundant in yeast. Alternatively, Kre6p may be part of a single multiprotein glucan synthase or modulate its activity. Use of KRE6 should permit a genetic analysis of eukaryotic (1----3)-beta-glucan synthesis.

Isolation and characterization of Saccharomyces cerevisiae mutants resistant to aculeacin A

Aculeacin A is a lipopeptide that inhibits beta-glucan synthesis in yeasts. A number of Saccharomyces cerevisiae mutants resistant to this antibiotic were isolated, and four loci (ACR1, ACR2, ACR3, and ACR4) whose products are involved in the sensitivity to aculeacin A of yeast cells were defined. Mutants containing mutations in the four loci were also resistant to echinocandin B, another member of this lipopeptide family of antibiotics. In contrast, acr1, acr3, and acr4 mutants were resistant to papulacandin B (an antibiotic containing a disaccharide linked to two fatty acid chains that also inhibits beta-glucan synthesis), but acr2 mutants were susceptible to this antibiotic. This result defines common and specific steps in the entry and action of aculeacin A and papulacandin B. The analysis of double mutants revealed an epistatic effect of the acr2 mutation on the other three mutations. Cell walls of the four different mutants did not show significant alterations in composition with respect to the parental strain, and in vitro glucan synthase activity was also unaffected. However, cell surface hydrophobicity in three of the mutants was considerably decreased with respect to the parental strain.

Biosynthesis of beta-glucans in fungi

Glucans are the most abundant polysaccharides present in fungi. The present review provides updated information on the structure and synthesis of beta-glucans in fungal cells. Synthesis of these polymers made up of B1,3 chains with a variable degree of B1,6 branching involves several reactions: initiation, chain elongation and branching, of which the most studied one is the elongation step. This reaction, catalyzed by the so-called glucan synthetases, utilizes UDPG as sugar donor. Properties of glucan synthetases are extremely variable depending on the fungal species, and their developmental stage. Because of the importance of these polysaccharides it is anticipated that comprehension of their mechanism of synthesis, is important for the understanding of cell wall assembly and cell growth and morphogenesis, as well as for the design of specific antifungal drugs.

Glucan synthesis in Pneumocystis carinii

Rat-derived Pneumocystis carinii lysed with sodium deoxycholate catalysed the incorporation of uridine diphosphoglucose into an insoluble polymer. This enzyme activity was present in both the pellet and the supernatant when the P. carinii preparations were centrifuged. The polymer whose production was catalysed by the supernatant was examined by mass spectrometry and found to be an alpha 1----4 glucan, which is either unbranched or has relatively few branches. Polymer formation was completely inhibited by the addition of alpha amyloglucohydrolase to the supernatant. Polymer formation in the pellet of deoxycholate P. carinii preparations, unlike that in the supernatant, was partially resistant to alpha amyloglucohydrolase. The soluble glucan synthase activity in the supernatant was stable for more than 30 h at room temperature and was approximately 50 times more active on a cell-to-cell basis than the supernatant from deoxycholate preparations of the yeast Saccharomyces cerevisae.

Isolation and characterization of Schizosaccharomyces pombe mutants defective in cell wall (1-3)beta-D-glucan

Schizosaccharomyces pombe thermosensitive mutants requiring the presence of an osmotic stabilizer to survive and grow at a nonpermissive temperature were isolated. The mutants were genetically and biochemically characterized. In all of them, the phenotype segregated in Mendelian fashion as a single gene which coded for a recessive character. Fourteen loci were defined by complementation analysis. Studies of cell wall composition showed a reduction in the amount of cell wall beta-glucan in three strains (JCR1, JCR5, and JCR10) when growing at 37 degrees C. Galactomannan was diminished in two others. Strains JCR1 and JCR5, with mutant alleles cwg1-1 and cwg2-1, respectively, were further studied. The cwg1 locus was mapped on the right arm of chromosome III, 18.06 centimorgans (cM) to the left of the ade5 marker; cwg2 was located on the left arm of chromosome I, 34.6 cM away from the aro5 marker. (1-3)beta-D-Glucan synthase activities from cwg1-1 and cwg2-1 mutant strains grown at 37 degrees C were diminished, as measured in vitro, compared with the wild-type strain; however, Km values and activation by GTP were similar to the wild-type values. Mutant synthases behaved like the wild-type enzyme in terms of thermostability. Analyses of round shape, lytic behavior, and low (1-3)beta-D-glucan synthase activity in cultures derived from ascospores of the same tetrad showed cosegregation of all these characters. Detergent dissociation of (1-3)beta-D-glucan synthase into soluble and particulate fractions and subsequent reconstitution demonstrated that the cwg1-1 mutant was affected in the particulate fraction of the enzymatic activity while cwg2-1 was affected in the soluble component. The antifungal agents Papulacandin B and Aculeacin A had similar effects on the enzymatic activities of the wild type and the cwg2-1 mutant strain, whereas the cwg1-1 mutant, when growing at 37 degrees C, had a more inhibitor-resistant (1,3)beta-D-glucan synthase. It is concluded that the cwg1+ and cwg2+ genes are related to (1,3)beta-D-glucan biosynthesis.

W-1 solubilization and kinetics of inhibition by cilofungin of Candida albicans (1,3)-beta-D-glucan synthase

(1,3)-beta-D-Glucan synthase of Candida albicans was rendered soluble by treatment of membrane preparations with the polyoxyethylene ether detergent W-1. Extraction with 0.025% W-1 at 4 degrees C for 24 h effectively solubilized and activated the enzyme. Under these conditions, greater than 85% of the protein in membrane preparations was released, and about 64% of the glucan synthase activity could be recovered in the soluble form. Soluble enzyme activity was stable for more than 12 days at 4 degrees C. Also, glucan synthase activity in the extracted membrane preparations could be activated to achieve more than twice the enzyme activity in the original, unextracted membrane preparations. The soluble glucan synthase had characteristics similar to those of the membrane-bound enzyme. Soluble glucan synthase had an apparent Km of 2.0 mM, and particulate glucan synthase had an apparent Km of 2.5 mM. Kinetics of cilofungin inhibition for both enzyme preparations were noncompetitive, with an apparent Ki of 2.5 microM; both preparations could be inhibited by cilofungin but not by its peptide nucleus or side chain, either alone or in combination. The reaction products from both forms of the enzyme were sensitive to (1,3)-beta-D-glucanase degradation but not to alpha-amylase, alpha-glucosidase, or proteinase K degradation and thus were shown to be beta(1----3) glucan.

Regulation of fungal cell wall growth: a guanine nucleotide-binding, proteinaceous component required for activity of (1----3)-beta-D-glucan synthase

By treatment with detergent and NaCl, particulate (1----3)-beta-D-glucan synthase (EC 2.4.1.34) from Hansenula anomala or Neurospora crassa was dissociated into a "soluble fraction" and a "membrane fraction." Each fraction alone was almost inactive, but enzymatic activity could be reconstituted by mixing the two fractions and adding GTP or one of its analogs. Based on their lability to heat and to incubation with trypsin, the activity in both fractions is proteinaceous. The active component in the soluble fraction appears to bind guanosine 5'-[gamma-thio]triphosphate (GTP[gamma S]), since it was specifically protected by this nucleotide against heat inactivation and against inactivation in the presence of EDTA. Furthermore, precipitation of the soluble component with ammonium sulfate in the presence of GTP[gamma S] gave rise to a fraction that was highly active in the absence of added nucleotide, indicating either tight binding or covalent interaction between GTP[gamma S] and the soluble component. The membrane fraction probably contains the catalytic moiety, because it was partially protected against heat inactivation by the substrate, UDP-glucose. Soluble fractions that stimulated membrane fractions from H. anomala and N. crassa were obtained from several other fungi, including Saccharomyces cerevisiae. We propose that the soluble fraction contains a GTP-binding protein that modulates the biosynthesis of (1----3)-beta-D-glucan of fungal cell walls and probably has a major role in the regulation of cell wall morphogenesis.

The effect of papulacandin B on (1----3)-beta-D-glucan synthetases. A possible relationship between inhibition and enzyme conformation

The antibiotic, papulacandin B, inhibited growth or (1----3)-beta-D-glucan synthetase (or both) in the fungi Saccharomyces cerevisiae, Hansenula anomala, Neurospora crassa, Cryptococcus laurentii, Schizophyllum commune and Wangiella dermatitidis. No effect was observed on Achlya ambisexualis. There was no apparent correlation between the inhibition of growth and that of the synthetase. With most of the fungal extracts, the inhibition of glucan synthetase by papulacandin B became less pronounced as the substrate (UDP-glucose) concentration was decreased. At very low levels of UDP-glucose, with the enzymes from S. cerevisiae and W. dermatitidis, the antibiotic stimulated the activity of glucan synthetase. As further studied with the W. dermatitidis enzyme, those low concentrations of UDP-glucose corresponded to a sigmoidal portion of the rate vs. substrate curve. The sigmoid segment of the curve extended to higher concentrations of UDP-glucose as the temperature was increased. Concomitantly, the range of substrate concentrations at which papulacandin B stimulated the reaction or was noninhibitory was broadened. It is tentatively concluded that glucan synthetase may exist in more than one interconvertible form. The stimulatory effect of papulacandin B is possibly due to preferential binding to the active form of the enzyme. The equilibrium between these forms could be shifted by structural changes in the membrane in which the enzyme is embedded. The lack of correlation between the effects of papulacandin B in whole cells and in extracts is discussed in terms of the variations in membrane structure in the two situations.