Alkaline phosphatase and OmpA protein can be translocated posttranslationally into membrane vesicles of Escherichia coli

Take Me Home, Protein Roads: Structural Insights into Signal Peptide Interactions during ER Translocation

Cleavable endoplasmic reticulum (ER) signal peptides (SPs) and other non-cleavable signal sequences target roughly a quarter of the human proteome to the ER. These short peptides, mostly located at the N-termini of proteins, are highly diverse. For most proteins targeted to the ER, it is the interactions between the signal sequences and the various ER targeting and translocation machineries such as the signal recognition particle (SRP), the protein-conducting channel Sec61, and the signal peptidase complex (SPC) that determine the proteins’ target location and provide translocation fidelity. In this review, we follow the signal peptide into the ER and discuss the recent insights that structural biology has provided on the governing principles of those interactions.

Microfluidics for Multiphase Mixing and Liposomal Encapsulation of Nanobioconjugates: Passive vs. Acoustic Systems

One of the main routes to ensure that biomolecules or bioactive agents remain active as they are incorporated into products with applications in different industries is by their encapsulation. Liposomes are attractive platforms for encapsulation due to their ease of synthesis and manipulation and the potential to fuse with cell membranes when they are intended for drug delivery applications. We propose encapsulating our recently developed cell-penetrating nanobioconjugates based on magnetite interfaced with translocating proteins and peptides with the purpose of potentiating their cell internalization capabilities even further. To prepare the encapsulates (also known as magnetoliposomes (MLPs)), we introduced a low-cost microfluidic device equipped with a serpentine microchannel to favor the interaction between the liposomes and the nanobioconjugates. The encapsulation performance of the device, operated either passively or in the presence of ultrasound, was evaluated both in silico and experimentally. The in silico analysis was implemented through multiphysics simulations with the software COMSOL Multiphysics 5.5® (COMSOL Inc., Stockholm, Sweden) via both a Eulerian model and a transport of diluted species model. The encapsulation efficiency was determined experimentally, aided by spectrofluorimetry. Encapsulation efficiencies obtained experimentally and in silico approached 80% for the highest flow rate ratios (FRRs). Compared with the passive mixer, the in silico results of the device under acoustic waves led to higher discrepancies with respect to those obtained experimentally. This was attributed to the complexity of the process in such a situation. The obtained MLPs demonstrated successful encapsulation of the nanobioconjugates by both methods with a 36% reduction in size for the ones obtained in the presence of ultrasound. These findings suggest that the proposed serpentine micromixers are well suited to produce MLPs very efficiently and with homogeneous key physichochemical properties.

Stepwise gating of the Sec61 protein-conducting channel by Sec63 and Sec62

Many proteins are transported into the endoplasmic reticulum by the universally conserved Sec61 channel. Post-translational transport requires two additional proteins, Sec62 and Sec63, but their functions are poorly defined. Here, we determined cryo-EM structures of several variants of Sec61–Sec62–Sec63 complexes from Saccharomyces cerevisiae and Thermomyces lanuginosus and show that Sec62 and Sec63 induce opening of the Sec61 channel. Without Sec62, the translocation pore of Sec61 remains closed by the plug domain, rendering the channel inactive. We further show that the lateral gate of Sec61 must first be partially opened by interactions between Sec61 and Sec63 in cytosolic and lumenal domains, a simultaneous disruption of which completely closes the channel. The structures and molecular dynamics simulations suggest that Sec62 may also prevent lipids from invading the channel through the open lateral gate. Our study shows how Sec63 and Sec62 work together in a hierarchical manner to activate Sec61 for post-translational protein translocation.

Cardiolipin is required in vivo for the stability of bacterial translocon and optimal membrane protein translocation and insertion

Translocation of preproteins across the Escherichia coli inner membrane requires anionic lipids by virtue of their negative head-group charge either in vivo or in situ. However, available results do not differentiate between the roles of monoanionic phosphatidylglycerol and dianionic cardiolipin (CL) in this essential membrane-related process. To define in vivo the molecular steps affected by the absence of CL in protein translocation and insertion, we analyzed translocon activity, SecYEG stability and its interaction with SecA in an E. coli mutant devoid of CL. Although no growth defects were observed, co- and post-translational translocation of α-helical proteins across inner membrane and the assembly of outer membrane β-barrel precursors were severely compromised in CL-lacking cells. Components of proton-motive force which could impair protein insertion into and translocation across the inner membrane, were unaffected. However, stability of the dimeric SecYEG complex and oligomerization properties of SecA were strongly compromised while the levels of individual SecYEG translocon components, SecA and insertase YidC were largely unaffected. These results demonstrate that CL is required in vivo for the stability of the bacterial translocon and its efficient function in co-translational insertion into and translocation across the inner membrane of E. coli.

SecA inhibitors as potential antimicrobial agents: differential actions on SecA-only and SecA-SecYEG protein-conducting channels

Sec-dependent protein translocation is an essential process in bacteria. SecA is a key component of the translocation machinery and has multiple domains that interact with various ligands. SecA acts as an ATPase motor to drive the precursor protein/peptide through the SecYEG protein translocation channels. As SecA is unique to bacteria and there is no mammalian counterpart, it is an ideal target for the development of new antimicrobials. Several reviews detail the assays for ATPase and protein translocation, as well as the search for SecA inhibitors. Recent studies have shown that, in addition to the SecA-SecYEG translocation channels, there are SecA-only channels in the lipid bilayers, which function independently from the SecYEG machinery. This mini-review focuses on recent advances on the newly developed SecA inhibitors that allow the evaluation of their potential as antimicrobial agents, as well as a fundamental understanding of mechanisms of SecA function(s). These SecA inhibitors abrogate the effects of efflux pumps in both Gram-positive and Gram-negative bacteria. We also discuss recent findings that SecA binds to ribosomes and nascent peptides, which suggest other roles of SecA. A model for the multiple roles of SecA is presented.

Enhancing full-length antibody production by signal peptide engineering

Background

Protein secretion to the periplasm of Escherichia coli offers an attractive route for producing heterologous proteins including antibodies. In this approach, a signal peptide is fused to the N-terminus of the heterologous protein. The signal peptide mediates translocation of the heterologous protein from the cytoplasm to the periplasm and is cleaved during the translocation process. It was previously shown that optimization of the translation initiation region (TIR) which overlaps with the nucleotide sequence of the signal sequence improves the production of heterologous proteins. Despite the progress, there is still room to improve yields using secretion as a means to produce protein complexes such as full-length monoclonal antibodies (mAbs).

Results

In this study we identified the inefficient secretion of heavy chain as the limitation for full-length mAb accumulation in the periplasm. To improve heavy chain secretion we investigated the effects of various signal peptides at controlled TIR strengths. The signal peptide of disulfide oxidoreductase (DsbA) mediated more efficient secretion of heavy chain than the other signal peptides tested. Mutagenesis studies demonstrated that at controlled translational levels, hydrophobicity of the hydrophobic core (H-region) of the signal peptide is a critical factor for heavy chain secretion and full-length mAb accumulation in the periplasm. Increasing the hydrophobicity of a signal peptide enhanced heavy chain secretion and periplasmic levels of assembled full-length mAbs, while decreasing the hydrophobicity had the opposite effect.

Conclusions

This study demonstrates that under similar translational strengths, the hydrophobicity of the signal peptide plays an important role in heavy chain secretion. Increasing the hydrophobicity of the H-region and controlling TIR strengths can serve as an approach to improve heavy chain secretion and full-length mAb production in E. coli.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-016-0445-3) contains supplementary material, which is available to authorized users.

SecAAA trimer is fully functional as SecAA dimer in the membrane: existence of higher oligomers?

SecA is an essential ATPase in bacterial Sec-dependent protein translocation pathway, and equilibrates between monomers and dimers in solution. The question of whether SecA functions as monomers or dimers in membranes during the protein translocation is controversial. We previously constructed a tail-to-head SecAA tandem dimer, and showed it is fully functional by complementation in vivo and protein translocation in vitro, indicating that SecA can function at least as a dimer in the membrane without dissociating into monomers. In this study, we further constructed genetically a tail-to-head SecAAA trimer, which is functional in complementing a temperature-sensitive secA mutant. The purified SecAAA trimer per protomer is fully active as SecAA tandem dimers in ATPase activity, in protein translocation in vitro and in ion channel activities in the oocytes. With these functional tail-to-head trimer SecAAA and tandem SecAA, we examined their surface topology in the presence of liposomes using AFM. As expected, the soluble SecAAA without lipids are larger than SecAA. However, the ring/pore structures of SecAAA trimers were, surprisingly, almost identical to the SecA 2-monomers and SecAA dimers, raising the intriguing possibility that the SecA may exist and function as hexamer ring-structures in membranes. Cross-linking with formaldehyde showed that SecA, SecAA and SecAAA could form larger oligomers, including the hexamers. The molecular modeling simulation shows that both tail-to-head and tail-to-tail hexamers in the membranes are possible.

Antibiotic targeting of the bacterial secretory pathway

Finding new, effective antibiotics is a challenging research area driven by novel approaches required to tackle unconventional targets. In this review we focus on the bacterial protein secretion pathway as a target for eliminating or disarming pathogens. We discuss the latest developments in targeting the Sec-pathway for novel antibiotics focusing on two key components: SecA, the ATP-driven motor protein responsible for driving preproteins across the cytoplasmic membrane and the Type I signal peptidase that is responsible for the removal of the signal peptide allowing the release of the mature protein from the membrane. We take a bird's-eye view of other potential targets in the Sec-pathway as well as other Sec-dependent or Sec-independent protein secretion pathways as targets for the development of novel antibiotics. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Additional in vitro and in vivo evidence for SecA functioning as dimers in the membrane: dissociation into monomers is not essential for protein translocation in Escherichia coli

SecA is an essential component in the Sec-dependent protein translocation pathway and, together with ATP, provides the driving force for the transport of secretory proteins across the cytoplasmic membrane of Escherichia coli. Previous studies established that SecA undergoes monomer-dimer equilibrium in solution. However, the oligomeric state of functional SecA during the protein translocation process is controversial. In this study, we provide additional evidence that SecA functions as a dimer in the membrane by (i) demonstration of the capability of the presumably monomeric SecA derivative to be cross-linked as dimers in vitro and in vivo, (ii) complementation of the growth of a secA(Ts) mutant with another nonfunctional SecA or (iii) in vivo complementation and in vitro function of a genetically tandem SecA dimer that does not dissociate into monomers, and (iv) formation of similar ring-like structures by the tandem SecA dimer and SecA in the presence of lipid bilayers. We conclude that SecA functions as a dimer in the membrane and dissociation into monomers is not necessary during protein translocation.

In vitro analysis of the bacterial twin-arginine-dependent protein export

Prokaryotic organisms possess a specialized protein translocase in their cytoplasmic membranes that catalyzes the export of folded preproteins. Substrates for this pathway are distinguished by a twin-arginine consensus motif in their signal peptides (twin-arginine translocation [Tat] pathway). We have compiled detailed protocols for the preparation and operation of a cell-free system by which the bacterial Tat pathway can be fully reproduced in vitro. This system has proven useful and is being further exploited for the study of precursor-translocase interactions, assembly of the translocase, and the mechanism of transmembrane passage.

Conditional lethal mutations separate the M13 procoat and Pf3 coat functions of YidC: different YIDC structural requirements for membrane protein insertion

Conditional lethal YidC mutants have been isolated to decipher the role of YidC in the assembly of Sec-dependent and Sec-independent membrane proteins. We now show that the membrane insertion of the Sec-independent M13 procoat-lep protein is inhibited in a short time in a temperature-sensitive mutant when shifted to the nonpermissive temperature. This provides an additional line of evidence that YidC plays a direct role in the insertion of the Sec-independent M13 procoat protein. However, in the temperature-sensitive mutant, the insertion of the Sec-independent Pf3 phage coat protein and the Sec-dependent leader peptidase were not strongly inhibited at the restricted temperatures. Conversely, using a cold-sensitive YidC strain, we find that the membrane insertion of the Sec-independent Pf3 coat protein is blocked, and the Sec-dependent leader peptidase is inhibited at the nonpermissive temperature, whereas the insertion of the M13 procoat protein is nearly normal. These data show that the YidC function for procoat and its function for Pf3 coat and possibly leader peptidase are genetically separable and suggest that the YidC structural requirements are different for the Sec-independent M13 procoat and Pf3 coat phage proteins that insert by different mechanisms.

Formation and structure of mixed bacterial communities

Mixed bacterial communities are formed by unrelated bacteria on solid media. Mixed bacterial communities on solid media are similar to "classical" colonies and are formed after the growth of a large number of unrelated bacteria simultaneously plated onto a limited area of agar. The morphology of the mixed bacterial communities was similar for different combinations of bacteria and did not change when the bacteria were plated on different media. Different bacterial strains form zones of individual and mixed growth in the structure of mixed bacterial communities. The results of electron microscopic examination indicate that mixed bacterial communities are isolated from their external environment by a surface film. The basic part of this film is formed by an elementary membrane. The membrane of the surface film of mixed bacterial communities is a stable structure occupying a large surface area. The results of this investigation seem to indicate the existence of a special type of co-operation between different species of bacteria. This type of co-operation may be very important in the regulation of interactions between different bacteria and between bacteria and the environment.

Catabolic repression of secB expression is positively controlled by cyclic AMP (cAMP) receptor protein-cAMP complexes at the transcriptional level

SecB, a protein export-specific chaperone, enhances the export of a subset of proteins across cytoplasmic membranes of Escherichia coli. Previous studies showed that the synthesis of SecB is repressed by the presence of glucose in the medium. The derepression of SecB requires the products of both the cya and crp genes, indicating that secB expression is under the control of catabolic repression. In this study, two secB-specific promoters were identified. In addition, 5' transcription initiation sites from these two promoters were determined by means of secB-lacZ fusions and primer extension. The distal P1 promoter appeared to be independent of carbon sources, whereas the proximal P2 promoter was shown to be subject to control by the cyclic AMP (cAMP) receptor protein (CRP)-cAMP complexes. Gel-mobility shift studies showed that this regulation results from direct interaction between the secB P2 promoter region and the CRP-cAMP complex. Moreover, the CRP binding site on the secB gene was determined by DNase I footprinting and further substantiated by mutational analysis. The identified secB CRP binding region is centered at the -61.5 region of the secB gene and differed from the putative binding sites predicted by computer analysis.

Phospholipid-assisted protein folding: phosphatidylethanolamine is required at a late step of the conformational maturation of the polytopic membrane protein lactose permease

Previously we presented evidence that phosphatidylethanolamine (PE) acts as a molecular chaperone in the folding of the polytopic membrane protein lactose permease (LacY) of Escherichia coli. Here we provide more definitive evidence supporting the chaperone properties of PE. Membrane insertion of LacY prevents its irreversible aggregation, and PE participates in a late step of conformational maturation. The temporal requirement for PE was demonstrated in vitro using a coupled translation-membrane insertion assay that allowed the separation of membrane insertion from phospholipid-assisted folding. LacY was folded properly, as assessed by recognition with conformation-specific monoclonal antibodies, when synthesized in the presence of PE-containing inside-out membrane vesicles (IOVs) or in the presence of IOVs initially lacking PE but supplemented with PE synthesized in vitro either co- or post-translationally. The presence of IOVs lacking PE and containing anionic phospholipids or no addition of IOVs resulted in misfolded or aggregated LacY, respectively. Therefore, critical folding steps occur after membrane insertion dependent on the interaction of LacY with PE to prevent illicit interactions which lead to misfolding of LacY.

Rapid transmembrane movement of newly synthesized phosphatidylethanolamine across the inner membrane of Escherichia coli

For the first time the transmembrane movement of an endogenously synthesized phospholipid across the inner membrane of E. coli is reported. [14C]phosphatidylethanolamine (PE) was biosynthetically introduced into inner membrane vesicles from the PE-deficient strain AD93, by reconstitution with the enzyme phosphatidylserine (PS) synthetase. Upon addition of wild type cell lysate containing PS synthetase, and the metabolic substrates CTP and [14C]serine to inside-out vesicles from AD93, [14C]PS was synthesized, which was for the most part converted into [14C]PE. [14C]PE was introduced in right-side out vesicles by enclosing PS synthetase and CTP in the vesicle lumen and adding [14C]serine. The newly synthesized [14C]PE immediately equilibrated over both membrane leaflets (t1/2 less than one min), as determined by its accessibility toward the amino-reactive chemical fluorescamine. In both inside- out and right-side out vesicles, a 35-65% distribution was found of the newly synthesized PE over the cytoplasmic and periplasmic leaflet, respectively. The transport process of PE was not influenced by the presence of ATP or the proton motive force in inside out vesicles. Pretreatment of both types of vesicles with sulfhydryl reagents, or of right-side out vesicles with proteinase K, did not affect the rate and extent of the transmembrane distribution of the newly synthesized PE.

In vitro membrane integration of leader peptidase depends on the Sec machinery and anionic phospholipids and can occur post-translationally

A cell-free system based on a lysate and membrane vesicles from Escherichia coli is used to study characteristics of the membrane integration reaction of the polytopic membrane protein leader peptidase (Lep). Integration into inverted inner membrane vesicles was detected by partial protection against externally added protease. Integration is most efficient when coupled to translation but can also occur post-translationally and depends on the action of the proteinaceous Sec machinery and availability of anionic phospholipids. Lep is the first example of a membrane protein without cleavable signal sequence which requires anionic lipids for integration in vitro.

A significant fraction of functional SecA is permanently embedded in the membrane. SecA cycling on and off the membrane is not essential during protein translocation

SecA has been suggested to cycle on and off the cytoplasmic membrane of Escherichia coli during protein translocation. We have reconstituted 35S-SecA onto SecA-depleted membrane vesicles and followed the fate of the membrane-associated 35S-SecA during protein translocation. Some 35S-SecA was released from the membranes in a translocation-independent manner. However, a significant fraction of 35S-SecA remained on the membranes even after incubation with excess SecA. This fraction of 35S-SecA was shown to be integrated into the membrane and was active in protein translocation, indicating that SecA cycling on and off membrane is not required for protein translocation. Proteolysis experiments did not support the model of SecA insertion and deinsertion during protein translocation; instead, a major 48-kDa domain was found persistently embedded in the membrane regardless of translocation status. Thus, in addition to catalyzing ATP hydrolysis, certain domains of SecA probably play an important structural role in the translocation machinery, perhaps forming part of the protein-conducting channels.

Rapid purification of native SecA from Escherichia coli: development of a new affinity chromatography procedure

The SecA protein occupies a pivotal position in the public protein export pathway in Escherichia coli. The multifunctional SecA protein recognizes cytoplasmic factors associated with export including the presecretory protein and targets the complex to the inner membrane, where it acts in the early stages of protein translocation. The ability of SecA to bind ATP was the basis for the development of a novel, rapid purification scheme involving a single chromatographic step. Affinity chromatography was carried out on Red Sepharose CL-6B. The SecA present in crude extracts of E. coli binds strongly to this dye-ligand matrix, and active protein was purified to greater than 90% homogeneity. The protein isolated by this procedure retained the previously described ATPase and RNA-binding activities of SecA. This approach should permit the rapid purification of SecA homologs from a variety microorganisms.

Lipoproteins in bacteria

Covalent modification of membrane proteins with lipids appears to be ubiquitous in all living cells. The major outer membrane (Braun's) lipoprotein of E. coli, the prototype of bacterial lipoproteins, is first synthesized as a precursor protein. Analysis of signal sequences of 26 distinct lipoprotein precursors has revealed a consensus sequence of lipoprotein modification/processing site of Leu-(Ala, Ser)-(Gly, Ala)-Cys at -3 to +1 positions which would represent the cleavage region of about three-fourth of all lipoprotein signal sequences in bacteria. Unmodified prolipoprotein with the putative consensus sequence undergoes sequential modification and processing reactions catalyzed by glyceryl transferase, O-acyl transferase(s), prolipoprotein signal peptidase (signal peptidase II), and N-acyl transferase to form mature lipoprotein. Like all exported proteins, the export of lipoprotein requires functional SecA, SecY, and SecD proteins. Thus all precursor proteins are exported through a common pathway accessible to both signal peptidase I and signal peptidase II. The rapidly increasing list of lipid-modified proteins in both prokaryotic as well as eukaryotic cells indicates that lipoproteins comprise a diverse group of structurally and functionally distinct proteins. They share a common structural feature which is derived from a common biosynthetic pathway.

Signal peptidases and signal peptide hydrolases

Signal peptidases, the endoproteases that remove the amino-terminal signal sequence from many secretory proteins, have been isolated from various sources. Seven signal peptidases have been purified, two from E. coli, two from mammalian sources, and three from mitochondrial matrix. The mitochondrial enzymes are soluble and function as a heterogeneous dimer. The mammalian enzymes are isolated as a complex and share a common glycosylated subunit. The bacterial enzymes are isolated as monomers and show no sequence homology with each other or the mammalian enzymes. The membrane-bound enzymes seem to require a substrate containing a consensus sequence following the -3, -1 rule of von Heijne at the cleavage site; however, processing of the substrate is strongly influenced by the hydrophobic region of the signal peptide. The enzymes appear to recognize an unknown three-dimensional motif rather than a specific amino acid sequence around the cleavage site. The matrix mitochondrial enzymes are metallo-endopeptidases; however, the other signal peptidases may belong to a unique class of proteases as they are resistant to chelators and most protease inhibitors. There are no data concerning the substrate binding site of these enzymes. In vivo, the signal peptide is rapidly degraded. Three different enzymes in Escherichia coli that can degrade a signal peptide in vitro have been identified. The intact signal peptide is not accumulated in mutants lacking these enzymes, which suggests that these peptidases individually are not responsible for the degradation of an intact signal peptide in vivo. It is speculated that signal peptidases and signal peptide hydrolases are integral components of the secretory pathway and that inhibition of the terminal steps can block translocation.

Export of the periplasmic maltose-binding protein of Escherichia coli

The export of the maltose-binding protein (MBP), the malE gene product, to the periplasm of Escherichia coli cells has been extensively investigated. The isolation of strains synthesizing MalE-LacZ hybrid proteins led to a novel genetic selection for mutants that accumulate export-defective precursor MBP (preMBP) in the cytoplasm. The export defects were subsequently shown to result from alterations in the MBP signal peptide. Analysis of these and a variety of mutants obtained in other ways has provided considerable insight into the requirements for an optimally functional MBP signal peptide. This structure has been shown to have multiple roles in the export process, including promoting entry of preMBP into the export pathway and initiating MBP translocation across the cytoplasmic membrane. The latter has been shown to be a late event relative to synthesis and can occur entirely posttranslationally, even many minutes after the completion of synthesis. Translocation requires that the MBP polypeptide exist in an export-competent conformation that most likely represents an unfolded state that is not inhibitory to membrane transit. The signal peptide contributes to the export competence of preMBP by slowing the rate at which the attached mature moiety folds. In addition, preMBP folding is thought to be further retarded by the binding of a cytoplasmic protein, SecB, to the mature moiety of nascent preMBP. In cells lacking this antifolding factor, MBP export represents a race between delivery of newly synthesized, export-competent preMBP to the translocation machinery in the cytoplasmic membrane and folding of preMBP into an export-incompetent conformation. SecB is one of three E. coli proteins classified as "molecular chaperones" by their ability to stabilize precursor proteins for membrane translocation.

Protein translocation in vitro: biochemical characterization of genetically defined translocation components

Recent years have seen the convergence of both genetic and biochemical approaches in the study of protein translocation in E. coli. The powerful combination of these approaches is exemplified in the use of an in vitro protein synthesis-protein translocation system to analyze the role of genetically defined components of the protein translocation machinery. We describe in this review recent results focusing on the function of the secA, secB, and secY gene products and the demonstration of their requirement for in vitro protein translocation. The SecA protein was recently shown to possess ATPase activity and was proposed to be a component of the translocation ATPase. We present a speculative working model whereby the translocator complex is composed of the integral membrane proteins SecY, SecD, SecE, and SecF, forming an aqueous channel in the cytoplasmic membrane, and the tightly associated peripheral membrane protein SecA functioning as the catalytic subunit of the translocator or "protein-ATPase."

In vitro trimerization of OmpF porin secreted by spheroplasts of Escherichia coli

It is not yet clear how bacterial outer membrane proteins reach their correct destination after they are secreted across the cytoplasmic membrane. We show here that porin OmpF is secreted into the medium as a water-soluble monomeric protein by spheroplasts of Escherichia coli. Furthermore, this monomeric porin is taken up by cell envelope preparations or purified lipopolysaccharides in the presence of 0.03% Triton X-100 and is converted correctly into the mature trimeric conformation. These results appear to reproduce a part of the physiological export and targeting steps of this protein.

Effects of inhibitors of membrane signal peptide peptidase on protein translocation into membrane vesicles

The effect of the removal of signal peptides after cleavage of precursor molecules by the signal peptidase I was examined in an in vitro translocation system with Escherichia coli membrane vesicles. The translocation of periplasmic alkaline phosphatase precursors was significantly inhibited by the protease inhibitors antipain, elastatinal and leupeptin. Antipain and leupeptin enhanced the translocation of precursors of outer membrane protein OmpA, but inhibited the processing. However, antipain did not inhibit the processing of precursors mediated by signal peptidase I in the soluble form. Moreover, the inhibition by antipain was not due to the disruption of membrane integrity, but occurred during the process of protein translocation. Since these small peptide inhibitors are known to inhibit membrane protease IV, a signal peptide peptidase, these results suggest that the hydrolysis of signal peptides is an important step in the recycles of the overall translocation process, and that the prevention of degradation of signal peptides feedback inhibits the preceding steps in the translocation pathway.

Temperature-dependent insertion of prolipoprotein into Escherichia coli membrane vesicles and requirements for ATP, soluble factors, and functional SecY protein for the overall translocation process

The requirements for the translocation of prolipoprotein into membrane vesicles were examined in an in vitro system. As measured by the eventual modification and processing of the prolipoprotein to form mature lipoprotein, the overall translocation process was found to require ATP hydrolysis, the presence of some heat-labile soluble cytoplasmic translocation factors, and the function of a cytoplasmic membrane protein, SecY/PrlA. However, the initial step of complete insertion of prolipoprotein into the membrane vesicles occurred without apparent requirements of a nucleotide, cytoplasmic translocation factors, or a functional SecY/PrlA membrane protein. Immunopurified prolipoprotein spontaneously inserted into membrane vesicles at elevated temperatures and required ATP and cytoplasmic translocation factors to form mature lipoprotein. The prolipoprotein inserted most efficiently into liposomes made of negatively charged phospholipids, indicating the importance of phospholipids in protein translocation. These results suggest that ATP hydrolysis and the actions of both cytoplasmic translocation factors and a functional SecY/PrlA membrane protein occur at a step(s) after the insertion of the precursors into membrane vesicles. The initial step of spontaneous insertion of prolipoprotein into membranes is in good agreement with membrane trigger hypothesis proposed by W. Wickner (Annu. Rev. Biochem. 48:23-45, 1979) and the helical hairpin hypothesis proposed by D. M. Engleman and T. A. Steitz (Cell 23:411-422, 1981).

SecA suppresses the temperature-sensitive SecY24 defect in protein translocation in Escherichia coli membrane vesicles

Genetic analysis of protein secretion in Escherichia coli has identified secY/prlA and secA as components of the secretory apparatus. We have examined the roles of the secY(prlA) gene product (an integral membrane protein) and the soluble secA gene product in translocation of OmpA and alkaline phosphatase precursors in an in vitro system. The protein translocation defect of the secY24 mutation was recently demonstrated in vitro as was its suppression by an S300 extract. We show here that the extract was essentially inactive in SecY24 suppression when SecA protein was removed from it by immunoaffinity chromatography. Furthermore, purified SecA protein suppressed the SecY24 defect. Preincubation of the inactivated SecY24 membrane vesicles either with S300 containing SecA or with purified SecA protein reconstituted the membranes and restored the translocation activity when assayed in the absence of additional soluble proteins. These results suggest that the SecY24 translocation defect is suppressed by SecA interacting, directly or indirectly, with SecY24 on the cytoplasmic membrane.

SecA protein is required for secretory protein translocation into E. coli membrane vesicles

The soluble and membrane components of an E. coli in vitro protein translocation system prepared from a secA amber mutant, secA13[Am], contain reduced levels of SecA and are markedly defective in both the cotranslational and posttranslational translocation of OmpA and alkaline phosphatase into membrane vesicles. Moreover, the removal of SecA from soluble components prepared from a wild-type strain by passage through an anti-SecA antibody column similarly abolishes protein translocation. Translocation activity is completely restored by addition of submicrogram amounts of purified SecA protein, implying that the observed defects are solely related to loss of SecA function. Interestingly, the translocation defect can be overcome by reconstitution of SecA into SecA-depleted membranes, suggesting that SecA is an essential, membrane-associated translocation factor.

In vitro insertion of leader peptidase into Escherichia coli membrane vesicles

Leader peptidase is an integral protein of the Escherichia coli cytoplasmic membrane whose topology is known. We have taken advantage of this knowledge and available mutants of this enzyme to develop a genetic test for a cell-free protein translocation reaction. We report that leader peptidase inserted into inverted plasma membrane vesicles in its correct transmembrane orientation. We have examined the in vitro membrane assembly characteristics of a variety of leader peptidase mutants and found that domains required for insertion in vivo are also necessary for insertion in vitro. These data demonstrate the physiological validity of the in vitro insertion reaction and strengthen the use of this in vitro protein translocation reaction for the dissection of this complex sorting pathway.

Nucleotide sequence and transcription start point of the phosphoglycerate transporter gene of Salmonella typhimurium

We identified the phosphoglycerate transporter gene of Salmonella typhimurium and its polypeptide product and determined the nucleotide sequence of the gene. The predicted translation product was a protein of 406 amino acid residues and was extremely hydrophobic, a feature that is consistent with its role in membrane transport. Hydropathy analysis suggested that there are eight transmembrane segments of at least 20 amino acid residues for the protein. The transcription start point was mapped to lie at position -44 relative to the putative translational initiation start point. Comparison of PgtP with UhpT and GlpT, the membrane-bound proteins involved in the transport of hexose-6-phosphate and glycerol-3-phosphate, respectively, revealed a very high degree of amino acid sequence similarity among them, reflecting not only similar structures and functions among these polypeptides but also a common evolutionary origin for them.

Processing by inverted plasma membrane vesicles of in vitro synthesized major lipoprotein from Escherichia coli

Synthesis, lipid modification and proteolytic processing of the major lipoprotein from Escherichia coli is shown to occur in a homologous in vitro transcription-translation system containing inverted plasma membrane vesicles. The primary translation product (cross-reacting with anti-lipoprotein antiserum) is a precursor which is converted into a lower molecular mass species of the size of mature lipoprotein by the addition of inverted membrane vesicles from E. coli. Conversion is prevented by globomycin, a specific inhibitor of the unique lipoprotein-signal peptidase II, which is active only on lipid-containing precursors. The inverted plasma membrane vesicles used here must therefore contain active lipid-modifying enzymes and signal peptidase II.

Requirement of heat-labile cytoplasmic protein factors for posttranslational translocation of OmpA protein precursors into Escherichia coli membrane vesicles

The involvement of possible cytoplasmic factors in ATP-dependent postttranslational translocation of proteins into Escherichia coli membrane vesicles was examined. The precursor of OmpA protein was partially purified by DEAE-cellulose chromatography, and its translocation was found to require material from the soluble cytoplasmic fraction. The fractionated active cytoplasmic translocation factor (CTF) was protease sensitive, micrococcal nuclease insensitive, N-ethylmaleimide resistant, and heat labile. The heat sensitivity of the CTF allowed its specific and preferential inactivation in the crude-precursor synthesis mixture, which provided a simple and rapid assay procedure for the factor during purification. Two active fractions were detected upon further fractionation: the major one was about 8S in sucrose gradient centrifugation and 120 kilodaltons by Sephadex filtration, whereas the other was about 4S and 60 kilodaltons in sucrose gradient centrifugation and by Sephadex filtration, respectively. The active fractions could also be fractionated by DEAE-Sepharose chromatography. These CTFs are apparently different from the previously reported 12S export factor (M. Muller and G. Blobel, Proc. Natl. Acad. Sci. USA 81:7737-7741, 1984).

Recent developments in chloroplast protein transport

Most proteins located in chloroplasts are encoded by nuclear genes, synthesized in the cytoplasm, and transported into the organelle. The study of protein uptake by chloroplasts has greatly expanded over the past few years. The increased activity in this field is due, in part, to the application of recombinant DNA methodology to the analysis of protein translocation. Added interest has also been gained by the realization that the transport mechanisms that mediate protein uptake by chloroplasts, mitochondria and the endoplasmic reticulum display certain characteristics in common. These include amino terminal sequences that target proteins to particular organelles, a transport process that is mechanistically independent from the events of translation, and an ATP-requiring transport step that is thought to involve partial unfolding of the protein to be translocated. In this review we examine recent studies on the binding of precursors to the chloroplast surface, the energy-dependent uptake of proteins into the stroma, and the targeting of proteins to the thylakoid lumen. These aspects of protein transport into chloroplasts are discussed in the context of recent studies on protein uptake by mitochondria.

Export and secretion of overproduced OmpA-beta-lactamase in Escherichia coli

The export of beta-lactamase to the periplasm of Escherichia coli can be directed by the OmpA signal peptide in the secretion cloning vector pIN-III. The overproduction of the hybrid precursor specifically induces a delay in the onset of processing of newly synthesized polypeptide chains. However, when the processing starts, no alteration in the rate of cleavage itself is observed. Our results suggest that the temporal mode of processing (which reflects translocation) does not depend on the nature of the signal peptide but rather depends on the nature of the polypeptide chain exported.

Biochemical evidence for the secY24 defect in Escherichia coli protein translocation and its suppression by soluble cytoplasmic factors

The secY (prlA) gene product is an integral membrane protein that has been identified genetically as one of the central components of the Escherichia coli protein translocation machinery. We have examined the effect of the secY24 (temperature-sensitive) mutation on the protein translocation activity of E. coli inverted membrane vesicles. Vesicles isolated from cells carrying this allele and grown at the nonpermissive temperature (42 degrees C) were less than 1% as active in translocation as vesicles isolated from an isogenic secY+ strain under the same conditions. Vesicles from the mutant strain grown at the permissive temperature (32 degrees C) were partially active, but those vesicles preincubated at 40 degrees C lost 90% of their activity. Moreover, the secY24 translocation defect on in vivo- or in vitro-inactivated vesicles was suppressed, or compensated, by an S300 soluble fraction from wild-type cells or from secY24 cells grown at nonpermissive temperature. The suppressing factor(s) was heat-labile and sensitive to proteinase K. These results provide biochemical evidence for the essential role of SecY in the translocation process and indicate that the translocation defect of SecY24 membranes can be compensated for by supplementing with additional soluble cytoplasmic proteins.

Trigger factor: a soluble protein that folds pro-OmpA into a membrane-assembly-competent form

Pro-OmpA that is synthesized in vitro can assemble into bacterial inner membrane vesicles in the presence of ATP and NADH. We have purified pro-OmpA to determine which additional soluble proteins are necessary for its membrane assembly. [35S]Pro-OmpA was bound to Sepharose-linked antibody to OmpA, then eluted with 8 M urea and chromatographed on an anion-exchange resin in 8 M urea. This pro-OmpA is purified 2000-fold and is radiochemically pure. After dialysis, it is soluble but incompetent for membrane assembly. Addition of an Escherichia coli cytoplasmic fraction (S100) to the assembly reaction does not allow translocation. However, when S100 is added to pro-OmpA prior to dialysis, full assembly competence is restored, suggesting that a soluble factor, termed "trigger factor," triggers the folding of pro-OmpA into an assembly-competent form as the urea is removed. We noted that, prior to the last purification step, the immunoaffinity-purified pro-OmpA was partially competent for membrane assembly without addition of trigger factor. To test whether trigger factor had bound to the antibody column by means of its association with pro-OmpA, the crude pro-OmpA was acid-denatured prior to immunoadsorption. In this experiment, the trigger factor did not bind to the anti-OmpA column, and S100 was required for renaturation of this [35S]pro-OmpA. As suggested by this experiment, the crude [35S]pro-OmpA was in a complex with other proteins. Sedimentation velocity studies showed that the trigger factor has an apparent molecular weight of approximately 60,000. We propose that it is required for translocation-competent folding of pro-OmpA and other precursor proteins.

Optimal posttranslational translocation of the precursor of PhoE protein across Escherichia coli membrane vesicles requires both ATP and the protonmotive force

In order to reach their final destination, periplasmic and outer membrane proteins have to pass the cytoplasmic membrane of Escherichia coli cells. To study the transport of PhoE protein, we developed an in vitro transcription-translation and translocation system. In this in vitro system, the protein is synthesized as a larger precursor, which can be processed by purified leader peptidase. The precursor can be translocated into inverted inner membrane vesicles as judged by the protection against externally added protease. Only part of the translocated protein is in the processed mature form. Translocation can occur posttranslationally and requires both ATP and the protonmotive force for an optimal process. Upon incubation of vesicles with mature PhoE protein or precursor PhoE in the absence of ATP, the proteins are bound to the vesicles, but they are not translocated, since they are still sensitive to externally added protease.

Soluble factors stimulating secretory protein translocation in bacteria and yeast can substitute for each other

mRNA for prepro-alpha-factor (pp alpha), a yeast secretory glycoprotein, was translated in a wheat germ cell-free system that was posttranslationally supplemented either with inverted vesicles from the plasma membrane of Escherichia coli (INV) or with microsomes from Saccharomyces cerevisiae. A postribosomal supernatant (PRS) from E. coli was found to stimulate translocation of pp alpha across the INV membrane. A yeast PRS could substitute for its E. coli counterpart. Likewise, an E. coli PRS could substitute for a yeast PRS and stimulate translocation of pp alpha across yeast microsomal membranes.

Effects of antibiotics and other inhibitors on ATP-dependent protein translocation into membrane vesicles

The effects of several membrane antibiotics and other agents on ATP-dependent protein translocation were examined in membrane vesicles under conditions where no significant proton motive force was present. The membrane perturbants ethanol and procaine abolished ATP-dependent protein translocation. Phenethyl alcohol at low concentrations abolished translocation, whereas at high concentrations it allowed precursors to be translocated but inhibited their processing. Translocation of precursors promoted by phenethyl alcohol was temperature dependent and occurred without an added energy source but was enhanced by ATP. However, such precursors could not be further processed to mature forms upon removal of the alcohol. The membrane-active antibiotics polymyxin B and gramicidin S were strong inhibitors of translocation, whereas gramicidin D, cerulenin, and mycobacillin had no effect even at higher concentrations, indicating some specificity in interference with protein translocation. Duramycin, an antibiotic previously shown to affect protein-lipid interaction, severely impaired protein translocation. These results showed that membrane structures play important roles, either directly or indirectly, in protein translocation. Chelating agents 1,10-phenanthroline and EDTA, but not EGTA [ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid], also abolished protein translocation.