Molecular characterization of the Salmonella typhimurium flhB operon and its protein products

In Silico Evaluation of Lawsonia intracellularis Genes Orthologous to Genes Associated with Pathogenesis in Other Intracellular Bacteria

Proliferative enteropathy is an enteric disease caused by the bacterium Lawsonia intracellularis, which affects several species of domestic and wild animals. The mechanisms underlying the mechanisms employed by L. intracellularis to cause host cell proliferation are poorly understood, mostly because this bacterium is extremely difficult to isolate and propagate in vitro. Comparative genomics methods for searching for genes orthologous to genes known to be associated with pathogenesis allow identification of genes potentially involved in pathogenesis by the pathogen of interest. The goal of this study was to carry out in silico research on L. intracellularis genes orthologous to genes required for intracellular invasion and survival present in other pathogenic bacteria, particularly Brucella abortus, B. melitensis, B. suis, Listeria monocytogenes, Mycobacterium tuberculosis, Mycobacterium avium subspecies paratuberculosis, Salmonella enterica, Yersinia pestis, Y. enterocolitica, and Y. pseudotuberculosis. A total of 127 genes associated with invasion and intracellular survival from five known intracellular bacteria were mapped against the predicted proteomes of all L. intracellularis strains publicly available on GenBank, using the OrthoFinder program. A total of 45 L. intracellularis genes were orthologous to genes associated with pathogenesis of other intracellular bacteria. Genes putatively associated with signal the transduction of chemotaxis and cell motility were identified. Genes related to DNA binding and repair were also identified, with some of them supporting a possible association of bacteria with macrophages or inducing pro-inflammatory responses. The homology-based identification of these genes suggests their potential involvement in the virulence and pathogenicity of L. intracellularis, opening avenues for future research and insights into the molecular mechanisms of Lawsonia-elicited proliferative enteropathy.

FlhE functions as a chaperone to prevent formation of periplasmic flagella in Gram-negative bacteria

The bacterial flagellum, which facilitates motility, is composed of ~20 structural proteins organized into a long extracellular filament connected to a cytoplasmic rotor-stator complex via a periplasmic rod. Flagellum assembly is regulated by multiple checkpoints that ensure an ordered gene expression pattern coupled to the assembly of the various building blocks. Here, we use epifluorescence, super-resolution, and transmission electron microscopy to show that the absence of a periplasmic protein (FlhE) prevents proper flagellar morphogenesis and results in the formation of periplasmic flagella in Salmonella enterica. The periplasmic flagella disrupt cell wall synthesis, leading to a loss of normal cell morphology resulting in cell lysis. We propose that FlhE functions as a periplasmic chaperone to control assembly of the periplasmic rod, thus preventing formation of periplasmic flagella.

FlhE functions as a chaperone to prevent formation of periplasmic flagella in Gram-negative bacteria

The bacterial flagellum is an organelle utilized by many Gram-negative bacteria to facilitate motility. The flagellum is composed of a several µm long, extracellular filament that is connected to a cytoplasmic rotor-stator complex via a periplasmic rod. Composed of ∼20 structural proteins, ranging from a few subunits to several thousand building blocks, the flagellum is a paradigm of a complex macromolecular structure that utilizes a highly regulated assembly process. This process is governed by multiple checkpoints that ensure an ordered gene expression pattern coupled to the assembly of the various flagellar building blocks in order to produce a functional flagellum. Using epifluorescence, super-resolution STED and transmission electron microscopy, we discovered that in Salmonella , the absence of one periplasmic protein, FlhE, prevents proper flagellar morphogenesis and results in the formation of periplasmic flagella. The periplasmic flagella disrupt cell wall synthesis, leading to a loss of the standard cell morphology resulting in cell lysis. We propose a model where FlhE functions as a periplasmic chaperone to control assembly of the periplasmic rod to prevent formation of periplasmic flagella. Our results highlight that bacteria evolved sophisticated regulatory mechanisms to control proper flagellar assembly and minor deviations from this highly regulated process can cause dramatic physiological consequences.

Activation mechanism of the bacterial flagellar dual-fuel protein export engine

Bacteria employ the flagellar type III secretion system (fT3SS) to construct flagellum, which acts as a supramolecular motility machine. The fT3SS of Salmonella enterica serovar Typhimurium is composed of a transmembrane export gate complex and a cytoplasmic ATPase ring complex. The transmembrane export gate complex is fueled by proton motive force across the cytoplasmic membrane and is divided into four distinct functional parts: a dual-fuel export engine; a polypeptide channel; a membrane voltage sensor; and a docking platform. ATP hydrolysis by the cytoplasmic ATPase complex converts the export gate complex into a highly efficient proton (H⁺)/protein antiporter that couples inward-directed H⁺ flow with outward-directed protein export. When the ATPase ring complex does not work well in a given environment, the export gate complex will remain inactive. However, when the electric potential difference, which is defined as membrane voltage, rises above a certain threshold value, the export gate complex becomes an active H⁺/protein antiporter to a considerable degree, suggesting that the export gate complex has a voltage-gated activation mechanism. Furthermore, the export gate complex also has a sodium ion (Na⁺) channel to couple Na⁺ influx with flagellar protein export. In this article, we review our current understanding of the activation mechanism of the dual-fuel protein export engine of the fT3SS. This review article is an extended version of a Japanese article, Membrane voltage-dependent activation of the transmembrane export gate complex in the bacterial flagellar type III secretion system, published in SEIBUTSU BUTSURI Vol. 62, p165-169 (2022).

Conserved GYXLI Motif of FlhA Is Involved in Dynamic Domain Motions of FlhA Required for Flagellar Protein Export

Flagellar structural subunits are transported via the flagellar type III secretion system (fT3SS) and assemble at the distal end of the growing flagellar structure. The C-terminal cytoplasmic domain of FlhA (FlhA_C) serves as a docking platform for export substrates and flagellar chaperones and plays an important role in hierarchical protein targeting and export. FlhA_C consists of domains D1, D2, D3, and D4 and adopts open and closed conformations. Gly-368 of Salmonella FlhA is located within the highly conserved GYXLI motif and is critical for the dynamic domain motions of FlhA_C. However, it remains unclear how it works. Here, we report that periodic conformational changes of the GYXLI motif induce a remodeling of hydrophobic side chain interaction networks in FlhA_C and promote the cyclic open-close domain motions of FlhA_C. The temperature-sensitive flhA(G368C) mutation stabilized a completely closed conformation at 42°C through strong hydrophobic interactions between Gln-498 of domain D1 and Pro-667 of domain D4 and between Phe-459 of domain D2 and Pro-646 of domain D4, thereby inhibiting flagellar protein export by the fT3SS. Its intragenic suppressor mutations reorganized the hydrophobic interaction networks in the closed FlhA_C structure, restoring the protein export activity of the fT3SS to a significant degree. Furthermore, the conformational flexibility of the GYXLI motif was critical for flagellar protein export. We propose that the conserved GYXLI motif acts as a structural switch to induce the dynamic domain motions of FlhA_C required for efficient and rapid protein export by the fT3SS.

IMPORTANCE Many motile bacteria employ the flagellar type III secretion system (fT3SS) to construct flagella beyond the cytoplasmic membrane. The C-terminal cytoplasmic domain of FlhA (FlhA_C), a transmembrane subunit of the fT3SS, provides binding sites for export substrates and flagellar export chaperones to coordinate flagellar protein export with assembly. FlhA_C undergoes cyclic open-close domain motions. The highly conserved Gly-368 residue of FlhA is postulated to be critical for dynamic domain motions of FlhA_C. However, it remains unknown how it works. Here, we carried out mutational analysis of FlhA_C combined with molecular dynamics simulation and provide evidence that the conformational flexibility of FlhA_C by Gly-368 is important for remodeling hydrophobic side chain interaction networks in FlhA_C to facilitate its cyclic open-close domain motions, allowing the fT3SS to transport flagellar structural subunits for efficient and rapid flagellar assembly.

Insight Into Distinct Functional Roles of the Flagellar ATPase Complex for Flagellar Assembly in Salmonella

Most motile bacteria utilize the flagellar type III secretion system (fT3SS) to construct the flagellum, which is a supramolecular motility machine consisting of basal body rings and an axial structure. Each axial protein is translocated via the fT3SS across the cytoplasmic membrane, diffuses down the central channel of the growing flagellar structure and assembles at the distal end. The fT3SS consists of a transmembrane export complex and a cytoplasmic ATPase ring complex with a stoichiometry of 12 FliH, 6 FliI and 1 FliJ. This complex is structurally similar to the cytoplasmic part of the F_OF₁ ATP synthase. The export complex requires the FliH₁₂-FliI₆-FliJ₁ ring complex to serve as an active protein transporter. The FliI₆ ring has six catalytic sites and hydrolyzes ATP at an interface between FliI subunits. FliJ binds to the center of the FliI₆ ring and acts as the central stalk to activate the export complex. The FliH dimer binds to the N-terminal domain of each of the six FliI subunits and anchors the FliI₆-FliJ₁ ring to the base of the flagellum. In addition, FliI exists as a hetero-trimer with the FliH dimer in the cytoplasm. The rapid association-dissociation cycle of this hetero-trimer with the docking platform of the export complex promotes sequential transfer of export substrates from the cytoplasm to the export gate for high-speed protein transport. In this article, we review our current understanding of multiple roles played by the flagellar cytoplasmic ATPase complex during efficient flagellar assembly.

Architecture and Assembly of the Bacterial Flagellar Motor Complex

One of the central systems responsible for bacterial motility is the flagellum. The bacterial flagellum is a macromolecular protein complex that is more than five times the cell length. Flagella-driven motility is coordinated via a chemosensory signal transduction pathway, and so bacterial cells sense changes in the environment and migrate towards more desirable locations. The flagellum of Salmonella enterica serovar Typhimurium is composed of a bi-directional rotary motor, a universal joint and a helical propeller. The flagellar motor, which structurally resembles an artificial motor, is embedded within the cell envelop and spins at several hundred revolutions per second. In contrast to an artificial motor, the energy utilized for high-speed flagellar motor rotation is the inward-directed proton flow through a transmembrane proton channel of the stator unit of the flagellar motor. The flagellar motor realizes efficient chemotaxis while performing high-speed movement by an ingenious directional switching mechanism of the motor rotation. To build the universal joint and helical propeller structures outside the cell body, the flagellar motor contains its own protein transporter called a type III protein export apparatus. In this chapter we summarize the structure and assembly of the Salmonella flagellar motor complex.

A Proline-Rich Element in the Type III Secretion Protein FlhB Contributes to Flagellar Biogenesis in the Beta- and Gamma-Proteobacteria

Flagella are bacterial organelles of locomotion. Their biogenesis is highly coordinated in time and space and relies on a specialized flagellar type III secretion system (fT3SS) required for the assembly of the extracellular hook, rod, and filament parts of this complex motor device. The fT3SS protein FlhB switches secretion substrate specificity once the growing hook reaches its determined length. Here we present the crystal structure of the cytoplasmic domain of the transmembrane protein FlhB. The structure visualizes a so-far unseen proline-rich region (PRR) at the very C-terminus of the protein. Strains lacking the PRR show a decrease in flagellation as determined by hook- and filament staining, indicating a role of the PRR during assembly of the hook and filament structures. Phylogenetic analysis shows that the PRR is a primary feature of FlhB proteins of flagellated beta- and gamma-proteobacteria. Taken together, our study adds another layer of complexity and organismic diversity to the process of flagella biogenesis.

The flexible linker of the secreted FliK ruler is required for export switching of the flagellar protein export apparatus

The hook length of the flagellum is controlled to about 55 nm in Salmonella. The flagellar type III protein export apparatus secretes FliK to determine hook length during hook assembly and changes its substrate specificity from the hook protein to the filament protein when the hook length has reached about 55 nm. Salmonella FliK consists of an N-terminal domain (FliK_N, residues 1–207), a C-terminal domain (FliK_C, residues 268–405) and a flexible linker (FliK_L, residues 208–267) connecting these two domains. FliK_N is a ruler to measure hook length. FliK_C binds to a transmembrane export gate protein FlhB to undergo the export switching. FliK_L not only acts as part of the ruler but also contributes to this switching event, but it remains unknown how. Here we report that FliK_L is required for efficient interaction of FliK_C with FlhB. Deletions in FliK_L not only shortened hook length according to the size of deletions but also caused a loose length control. Deletion of residues 206–265 significantly reduced the binding affinity of FliK_C for FlhB, thereby producing much longer hooks. We propose that an appropriate length of FliK_L is required for efficient interaction of FliK_C with FlhB.

Role of Flagellin-Homologous Proteins in Biofilm Formation by Pathogenic Vibrio Species

Flagellar filaments of the pathogenic Vibrio species, including V. vulnificus, V. parahaemolyticus, and V. cholerae, are composed of multiple flagellin subunits. In their genomes, however, there are higher numbers of the ORFs encoding flagellin-like proteins than the numbers of flagellin subunits required for filament assembly. Since these flagellin-homologous proteins (FHPs) are well expressed and excreted to environments via a flagellin transport channel, their extracellular role in the pathogenic Vibrio has been enigmatic. Their biological significance, which is not related with flagellar functions, has been revealed to be in maturation of biofilm structures. Among various components of the extracellular polymeric matrix produced in the V. vulnificus biofilms, the exopolysaccharides (EPS) are dominant constituents and crucial in maturation of biofilms. The enhancing role of the V. vulnificus FHPs in biofilm formation requires the presence of EPS, as indicated by highly specific interactions among two FHPs and three EPS.

The pathogenic bacterium Vibrio vulnificus exhibits the ability to form biofilm, for which initiation is dependent upon swimming motility by virtue of a polar flagellum. The filament of its flagellum is composed of multiple flagellin subunits, FlaA, -B, -C, and -D. In V. vulnificus genomes, however, open reading frames (ORFs) annotated by FlaE and -F are also present. Although neither FlaE nor FlaF is involved in filament formation and cellular motility, they are well expressed and secreted to the extracellular milieu through the secretion apparatus for flagellar assembly. In the extrapolymeric matrix of V. vulnificus biofilm, significant levels of FlaEF were detected. Mutants defective in both flaE and flaF formed significantly decreased biofilms compared to the wild-type biofilm. Thus, the potential role of FlaEF during the biofilm-forming process was investigated by exogenous addition of recombinant FlaEF (rFlaEF) to the biofilm assays. The added rFlaE and rFlaF were predominantly incorporated into the biofilm matrix formed by the wild type. However, biofilms formed by a mutant defective in exopolysaccharide (EPS) biosynthesis were not affected by added FlaEF. These results raised a possibility that FlaEF specifically interact with EPS within the biofilm matrix. In vitro pulldown assays using His-tagged rFlaEF or rFlaC revealed the specific binding of EPS to rFlaEF but not to rFlaC. Taken together, our results demonstrate that V. vulnificus FlaEF, flagellin-homologous proteins (FHPs), are crucial for biofilm formation by directly interacting with the essential determinant for biofilm maturation, EPS. Further analyses performed with other pathogenic Vibrio species demonstrated both the presence of FHPs and their important role in biofilm formation.

Mutational analysis of the C-terminal cytoplasmic domain of FlhB, a transmembrane component of the flagellar type III protein export apparatus in Salmonella

The flagellar protein export apparatus switches its substrate specificity when hook length has reached approximately 55 nm in Salmonella. The C-terminal cytoplasmic domain of FlhB (FlhB_C ) is involved in this switching process. FlhB_C consists of FlhB_CN and FlhB_CC polypeptides. FlhB_CC has a flexible C-terminal tail (FlhB_CCT ). FlhB_CC is involved in substrate recognition, and conformational rearrangements of FlhB_CN -FlhB_CC boundary are postulated to be required for the export switching. However, it remains unknown how it occurs. To clarify this question, we carried out mutational analysis of highly conserved residues in FlhB_C . The flhB(E230A) mutation reduced the FlhB function. The flhB(E11S) mutation restored the protein transport activity of the flhB(E230A) mutant to the wild-type level, suggesting that the interaction of FlhB_CN with the extreme N-terminal region of FlhB is required for flagellar protein export. The flhB(R320A) mutation affected hydrophobic interaction networks in FlhB_CC , thereby increasing insolubility of FlhB_C . The R320A mutation also affected the export switching, thereby producing longer hooks with the filament attached. C-terminal truncations of FlhB_CCT induced a conformational change of FlhB_CN -FlhB_CC boundary, resulting in a loose hook length control. We propose that FlhB_CCT may control conformational arrangements of FlhB_CN -FlhB_CC boundary through the hydrophobic interaction networks of FlhB_CC .

Characterization of a Highly Virulent Edwardsiella anguillarum Strain Isolated From Greek Aquaculture, and a Spontaneously Induced Prophage Therein

Edwardsiella-associated outbreaks are increasingly reported on both marine and freshwater aquaculture setups, accounting for severe financial and biomass losses. E. tarda, E. ictaluri, and E. hoshinae have been the traditional causative agents of edwardsiellosis in aquaculture, however, intensive studies due to the significance of the disease have just recently revealed two more species, E. piscicida and E. anguillarum. Whole genome sequencing that was conducted on the strain EA011113, isolated from farmed Diplodus puntazzo after an edwardsiellosis outbreak in Greece, confirmed it as a new clinical strain of E. anguillarum. Extensive phylogenetic analysis showed that this Greek strain is closely related to an Israeli E. piscicida-like clinical strain, isolated from diseased groupers, Epinephelus aeneus and E. marginatus in Red Sea. Bioinformatic analyses of E. anguillarum strain EA011113 unveiled a wide repertoire of potential virulence factors, the effect of which was corroborated by the mortalities that the strain induced in adult zebrafish, Danio rerio, under different levels of infection intensity (LD50 after 48 h: 1.85 × 104 cfu/fish). This strain was non-motile and according to electron microscopy lacked flagella, a fact that is not typical for E. anguillarum. Comparative genomic analysis revealed a deletion of 36 nt found in the flagellar biosynthetic gene (FlhB) that could explain that trait. Further in silico analysis revealed an intact prophage that was integrated in the bacterial genome. Following spontaneous induction, the phage was isolated, purified, characterized and independently sequenced, confirming its viability as a free, inducible virion as well. Separate genomic analysis of the prophage implies a plausible case of lysogenic conversion. Focusing on edwardsiellosis as a rapidly emerging aquaculture disease on a global scale, this work offers some insight into the virulence, fitness, and potential lysogenic conversion of a of a newly described, yet highly pathogenic, strain of E. anguillarum.

Molecular Organization and Assembly of the Export Apparatus of Flagellar Type III Secretion Systems

The bacterial flagellum is a supramolecular motility machine consisting of the basal body, the hook, and the filament. For construction of the flagellum beyond the cellular membranes, a type III protein export apparatus uses ATP and proton-motive force (PMF) across the cytoplasmic membrane as the energy sources to transport flagellar component proteins from the cytoplasm to the distal end of the growing flagellar structure. The protein export apparatus consists of a PMF-driven transmembrane export gate complex and a cytoplasmic ATPase complex. In addition, the basal body C ring acts as a sorting platform for the cytoplasmic ATPase complex that efficiently brings export substrates and type III export chaperone-substrate complexes from the cytoplasm to the export gate complex. In this book chapter, we will summarize our current understanding of molecular organization and assembly of the flagellar type III protein export apparatus.

The role of intrinsically disordered C-terminal region of FliK in substrate specificity switching of the bacterial flagellar type III export apparatus

The bacterial flagellar export switching machinery consists of a ruler protein, FliK, and an export switch protein, FlhB and switches substrate specificity of the flagellar type III export apparatus upon completion of hook assembly. An interaction between the C-terminal domain of FliK (FliK_C ) and the C-terminal cytoplasmic domain of FlhB (FlhB_C ) is postulated to be responsible for this switch. FliK_C has a compactly folded domain termed FliK_T3S4 (residues 268-352) and an intrinsically disordered region composed of the last 53 residues, FliK_CT (residues 353-405). Residues 301-350 of FliK_T3S4 and the last five residues of FliK_CT are critical for the switching function of FliK. FliK_CT is postulated to regulate the interaction of FliK_T3S4 with FlhB_C , but it remains unknown how. Here we report the role of FliK_CT in the export switching mechanism. Systematic deletion analyses of FliK_CT revealed that residues of 351-370 are responsible for efficient switching of substrate specificity of the export apparatus. Suppressor mutant analyses showed that FliK_CT coordinates FliK_T3S4 action with the switching. Site-directed photo-cross-linking experiments showed that Val-302 and Ile-304 in the hydrophobic core of FliK_T3S4 bind to FlhB_C . We propose that FliK_CT may induce conformational rearrangements of FliK_T3S4 to bind to FlhB_C .

Mechanism of type-III protein secretion: Regulation of FlhA conformation by a functionally critical charged-residue cluster

The bacterial flagellum contains a specialized secretion apparatus in its base that pumps certain protein subunits through the growing structure to their sites of installation beyond the membrane. A related apparatus functions in the injectisomes of gram-negative pathogens to export virulence factors into host cells. This mode of protein export is termed type-III secretion (T3S). Details of the T3S mechanism are unclear. It is energized by the proton gradient; here, a mutational approach was used to identify proton-binding groups that might function in transport. Conserved proton-binding residues in all the membrane components were tested. The results identify residues R147, R154 and D158 of FlhA as most critical. These lie in a small, well-conserved cytoplasmic domain of FlhA, located between transmembrane segments 4 and 5. Two-hybrid experiments demonstrate self-interaction of the domain, and targeted cross-linking indicates that it forms a multimeric array. A mutation that mimics protonation of the key acidic residue (D158N) was shown to trigger a global conformational change that affects the other, larger cytoplasmic domain that interacts with the export cargo. The results are discussed in the framework of a transport model based on proton-actuated movements in the cytoplasmic domains of FlhA.

The Bacterial Flagellar Type III Export Gate Complex Is a Dual Fuel Engine That Can Use Both H+ and Na+ for Flagellar Protein Export

The bacterial flagellar type III export apparatus utilizes ATP and proton motive force (PMF) to transport flagellar proteins to the distal end of the growing flagellar structure for self-assembly. The transmembrane export gate complex is a H⁺–protein antiporter, of which activity is greatly augmented by an associated cytoplasmic ATPase complex. Here, we report that the export gate complex can use sodium motive force (SMF) in addition to PMF across the cytoplasmic membrane to drive protein export. Protein export was considerably reduced in the absence of the ATPase complex and a pH gradient across the membrane, but Na⁺ increased it dramatically. Phenamil, a blocker of Na⁺ translocation, inhibited protein export. Overexpression of FlhA increased the intracellular Na⁺ concentration in the presence of 100 mM NaCl but not in its absence, suggesting that FlhA acts as a Na⁺ channel. In wild-type cells, however, neither Na⁺ nor phenamil affected protein export, indicating that the Na⁺ channel activity of FlhA is suppressed by the ATPase complex. We propose that the export gate by itself is a dual fuel engine that uses both PMF and SMF for protein export and that the ATPase complex switches this dual fuel engine into a PMF-driven export machinery to become much more robust against environmental changes in external pH and Na⁺ concentration.

For construction of the bacterial flagellum beyond the inner and outer membranes, the flagellar type III export apparatus transports fourteen flagellar proteins with their copy numbers ranging from a few to tens of thousands to the distal growing end of the flagellar structure. The export apparatus consists of a transmembrane export gate complex and a cytoplasmic ATPase complex. Here, we show that the export engine of the flagellar type III export apparatus is robust in maintaining its export activity against internal and external perturbations arising from genetic variations and/or environmental changes. When the cytoplasmic ATPase complex is absent, the export gate complex is able to utilize sodium motive force (SMF) across the cytoplasmic membrane as a fuel in addition to proton motive force (PMF). However, the export gate utilizes only PMF as the energy source when the ATPase complex is active. An export gate protein FlhA shows an intrinsic ion channel activity. These observations suggest that the export gate intrinsically uses both PMF and SMF for protein export and that the ATPase complex switches the export gate into a highly efficient PMF-driven export engine to become much more robust against environmental perturbations.

FliH and FliI ensure efficient energy coupling of flagellar type III protein export in Salmonella

For construction of the bacterial flagellum, flagellar proteins are exported via its specific export apparatus from the cytoplasm to the distal end of the growing flagellar structure. The flagellar export apparatus consists of a transmembrane (TM) export gate complex and a cytoplasmic ATPase complex consisting of FliH, FliI, and FliJ. FlhA is a TM export gate protein and plays important roles in energy coupling of protein translocation. However, the energy coupling mechanism remains unknown. Here, we performed a cross‐complementation assay to measure robustness of the energy transduction system of the export apparatus against genetic perturbations. Vibrio FlhA restored motility of a Salmonella ΔflhA mutant but not that of a ΔfliH‐fliI flhB(P28T) ΔflhA mutant. The flgM mutations significantly increased flagellar gene expression levels, allowing Vibrio FlhA to exert its export activity in the ΔfliH‐fliI flhB(P28T) ΔflhA mutant. Pull‐down assays revealed that the binding affinities of Vibrio FlhA for FliJ and the FlgN–FlgK chaperone–substrate complex were much lower than those of Salmonella FlhA. These suggest that Vibrio FlhA requires the support of FliH and FliI to efficiently and properly interact with FliJ and the FlgN–FlgK complex. We propose that FliH and FliI ensure robust and efficient energy coupling of protein export during flagellar assembly.

[Structure and function of the bacterial flagellar type III protein export system in Salmonella ]

The bacterial flagellum is a filamentous organelle that propels the bacterial cell body in liquid media. For construction of the bacterial flagellum beyond the cytoplasmic membrane, flagellar component proteins are transported by its specific protein export apparatus from the cytoplasm to the distal end of the growing flagellar structure. The flagellar export apparatus consists of a transmembrane export gate complex and a cytoplasmic ATPase ring complex. Flagellar substrate-specific chaperones bind to their cognate substrates in the cytoplasm and escort the substrates to the docking platform of the export gate. The export apparatus utilizes ATP and proton motive force across the cytoplasmic membrane as the energy sources to drive protein export and coordinates protein export with assembly by ordered export of substrates to parallel with their order of assembly. In this review, we summarize our current understanding of the structure and function of the flagellar protein export system in Salmonella enterica serovar Typhimurium.

Structure of Salmonella FlhE, conserved member of a flagellar type III secretion operon

The bacterial flagellum is assembled by a multicomponent transport apparatus categorized as a type III secretion system. The secretion of proteins that assemble into the flagellum is driven by the proton motive force. The periplasmic protein FlhE is a member of the flhBAE operon in the majority of bacteria where FlhE is found. FlhA and FlhB are established components of the flagellar type III secretion system. The absence of FlhE results in a proton leak through the flagellar system, inappropriate secretion patterns, and cell death, indicating that FlhE regulates an important aspect of proper flagellar biosynthesis. We isolated FlhE from the periplasm of Salmonella and solved its structure to 1.5Å resolution. The structure reveals a β-sandwich fold, with no close structural homologs. Possible roles of FlhE, including that of a chaperone, are discussed.

Protein export through the bacterial flagellar type III export pathway

For construction of the bacterial flagellum, which is responsible for bacterial motility, the flagellar type III export apparatus utilizes both ATP and proton motive force across the cytoplasmic membrane and exports flagellar proteins from the cytoplasm to the distal end of the nascent structure. The export apparatus consists of a membrane-embedded export gate made of FlhA, FlhB, FliO, FliP, FliQ, and FliR and a water-soluble ATPase ring complex consisting of FliH, FliI, and FliJ. FlgN, FliS, and FliT act as substrate-specific chaperones that do not only protect their cognate substrates from degradation and aggregation in the cytoplasm but also efficiently transfer the substrates to the export apparatus. The ATPase ring complex facilitates the initial entry of the substrates into the narrow pore of the export gate. The export gate by itself is a proton-protein antiporter that uses the two components of proton motive force, the electric potential difference and the proton concentration difference, for different steps of the export process. A specific interaction of FlhA with FliJ located in the center of the ATPase ring complex allows the export gate to efficiently use proton motive force to drive protein export. The ATPase ring complex couples ATP binding and hydrolysis to its assembly-disassembly cycle for rapid and efficient protein export cycle. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Function of FlhB, a membrane protein implicated in the bacterial flagellar type III secretion system

The membrane protein FlhB is a highly conserved component of the flagellar secretion system, and it plays an active role in the regulation of protein export. In this study conserved properties of FlhB that are important for its function were investigated. Replacing the flhB gene (or part of the gene) in Salmonella typhimurium with the flhB gene of the distantly related bacterium Aquifex aeolicus greatly reduces motility. However, motility can be restored to some extent by spontaneous mutations in the part of flhB gene coding for the cytoplasmic domain of Aquifex FlhB. Structural analysis suggests that these mutations destabilize the structure. The secondary structure and stability of the mutated cytoplasmic fragments of FlhB have been studied by circular dichroism spectroscopy. The results suggest that conformational flexibility could be important for FlhB function. An extragenic suppressor mutation in the fliS gene, which decreases the affinity of FliS to FliC, partially restores motility of the FlhB substitution mutants.

Role of the Dc domain of the bacterial hook protein FlgE in hook assembly and function

The bacterial flagellar hook acts as a universal joint to smoothly transmit torque produced by the motor to the filament. The hook protein FlgE assembles into a 55 nm tubular structure with the help of the hook cap (FlgD). FlgE consists of four domains, D0, Dc, D1 and D2, arranged from the inner to the outer part of the tubular structure of the hook. The Dc domain contributes to the structural stability of the hook, but it is unclear how this Dc domain is responsible for the universal joint mechanism. Here, we carried out a deletion analysis of the FlgE Dc domain. FlgEΔ4/5 with deletion of residues 30 to 49 was not secreted into the culture media. FlgEΔ5 and FlgEΔ6 with deletions of residues 40 to 49 and 50 to 59, respectively, still formed hooks, allowing the export apparatus to export the hook-filament junction proteins FlgK and FlgL and flagellin FliC. However, these deletions inhibited the replacement of the FlgD hook cap by FlgK at the hook tip, thereby abolishing filament formation. Deletion of residues 50 to 59 significantly affected hook morphology. These results suggest that the Dc domain is responsible not only for hook assembly but also for FlgE export, the interaction with FlgK, and the polymorphic supercoiling mechanism of the hook.

Inhibition of a type III secretion system by the deletion of a short loop in one of its membrane proteins

The membrane protein FlhB is a highly conserved component of the flagellar secretion system. It is composed of an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhBC). Here, the crystal structures of FlhBC from Salmonella typhimurium and Aquifex aeolicus are described at 2.45 and 2.55 Å resolution, respectively. These flagellar FlhBC structures are similar to those of paralogues from the needle type III secretion system, with the major difference being in a linker that connects the transmembrane and cytoplasmic domains of FlhB. It was found that deletion of a short flexible loop in a globular part of Salmonella FlhBC leads to complete inhibition of secretion by the flagellar secretion system. Molecular-dynamics calculations demonstrate that the linker region is the most flexible part of FlhBC and that the deletion of the loop reduces this flexibility. These results are in good agreement with previous studies showing the importance of the linker in the function of FlhB and provide new insight into the relationship between the different parts of the FlhBC molecule.

Regulation of the Yersinia type III secretion system: traffic control

Yersinia species, as well as many other Gram-negative pathogens, use a type III secretion system (T3SS) to translocate effector proteins from the bacterial cytoplasm to the host cytosol. This T3SS resembles a molecular syringe, with a needle-like shaft connected to a basal body structure, which spans the inner and outer bacterial membranes. The basal body of the injectisome shares a high degree of homology with the bacterial flagellum. Extending from the T3SS basal body is the needle, which is a polymer of a single protein, YscF. The distal end of the needle serves as a platform for the assembly of a tip complex composed of LcrV. Though never directly observed, prevailing models assume that LcrV assists in the insertion of the pore-forming proteins YopB and YopD into the host cell membrane. This completes a bridge between the bacterium and host cell to provide a continuous channel through which effectors are delivered. Significant effort has gone into understanding how the T3SS is assembled, how its substrates are recognized and how substrate delivery is controlled. Arguably the latter topic is the least understood; however, recent advances have provided new insight, and therefore, this review will focus primarily on summarizing the current state of knowledge regarding the control of substrate delivery by the T3SS. Specifically, we will discuss the roles of YopK, as well as YopN and YopE, which have long been linked to regulation of translocation. We also propose models whereby the YopK regulator communicates with the basal body of the T3SS to control translocation.

Interaction of the extreme N-terminal region of FliH with FlhA is required for efficient bacterial flagellar protein export

The flagellar type III protein export apparatus plays an essential role in the formation of the bacterial flagellum. FliH forms a complex along with FliI ATPase and is postulated to provide a link between FliI ring formation and flagellar protein export. Two tryptophan residues of FliH, Trp7 and Trp10, are required for the effective docking of the FliH-FliI complex to the export gate made of six membrane proteins. However, it remains unknown which export gate component interacts with these two tryptophan residues. Here, we performed targeted photo-cross-linking of the extreme N-terminal region of FliH (FliH(EN)) with its binding partners. We replaced Trp7 and Trp10 of FliH with p-benzoyl-phenylalanine (pBPA), a photo-cross-linkable unnatural amino acid, to produce FliH(W7pBPA) and FliH(W10pBPA). They were both functional and were photo-cross-linked with one of the export gate proteins, FlhA, but not with the other gate proteins, indicating that these two tryptophan residues are in close proximity to FlhA. Mutant FlhA proteins that are functional in the presence of FliH and FliI but not in their absence showed a significantly reduced function also by N-terminal FliH mutations even in the presence of FliI. We suggest that the interaction of FliH(EN) with FlhA is required for anchoring the FliI hexamer ring to the export gate for efficient flagellar protein export.

Loss of FlhE in the flagellar Type III secretion system allows proton influx into Salmonella and Escherichia coli

flhE belongs to the flhBAE flagellar operon in Enterobacteria, whose first two members function in Type III secretion (T3S). In Salmonella enterica, absence of FlhE affects swarming, but not swimming, motility. Based on a chance observation of a 'green' colony phenotype of flhE mutants on pH indicator plates containing glucose, we have established that this phenotype is associated with lysis of flagellated cells in an acidic environment created by glucose metabolism. The flhE mutant phenotype of Escherichia coli is similar overall to that of S. enterica but is seen in the absence of glucose and, unlike in S. enterica, causes a substantial growth defect. flhE mutants have a lowered cytoplasmic pH in both bacteria, indicative of a proton leak. GFP reporter assays indicate that the leak is dependent on the flagellar system, is present before the T3S system switches to secretion of late substrates, and gets worse after the switch and upon filament assembly, leading to cell lysis. We show that FlhE is a periplasmic protein that co-purifies with flagellar basal bodies. FlhE may act as a plug or a chaperone to regulate proton flow through the flagellar T3S system.

Functional defect and restoration of temperature-sensitive mutants of FlhA, a subunit of the flagellar protein export apparatus

The flagellar axial component proteins are exported to the distal end of the growing flagellum for self-assembly by the flagellar type III export apparatus. FlhA is a key membrane protein of the export apparatus, and its C-terminal cytoplasmic domain (FlhA(C)) is a part of an assembly platform for the three soluble export components, FliH, FliI, and FliJ, as well as export substrates and chaperone-substrate complexes. FlhA(C) is composed of a flexible linker region and four compact domains (A(C)D1-A(C)D4). At 42 °C, a temperature-sensitive (TS) G368C mutation in FlhA(C) blocks the export process after the FliH-FliI-FliJ-substrate complex binds to the assembly platform, but it remains unknown how it does so. In this study, we analyzed a TS mutant variant, FlhA(C)(G368C), and its pseudorevertant variants FlhA(C)(G368C/L359F), FlhA(C)(G368C/G364R), FlhA(C)(G368C/R370S), and FlhA(C)(G368C/P550S) using far-ultraviolet circular dichroism. Whereas the denaturation of the wild-type FlhA(C) occurs in a single step, FlhA(C)(G368C) and its pseudorevertant variants showed thermal transitions, at least, in two steps. The first transition of FlhA(C)(G368C) can further be divided into reversible and following irreversible transitions, which correspond to the denaturation of A(C)D2 and A(C)D1, respectively. We show the relation between the reversible transition and the TS defect in the exporting function of FlhA(C)(G368C) and that the loss of function is caused by denaturation of A(C)D2. We suggest that A(C)D2 is directly involved in the translocation of export substrates.

Genetic characterization of conserved charged residues in the bacterial flagellar type III export protein FlhA

For assembly of the bacterial flagellum, most of flagellar proteins are transported to the distal end of the flagellum by the flagellar type III protein export apparatus powered by proton motive force (PMF) across the cytoplasmic membrane. FlhA is an integral membrane protein of the export apparatus and is involved in an early stage of the export process along with three soluble proteins, FliH, FliI, and FliJ, but the energy coupling mechanism remains unknown. Here, we carried out site-directed mutagenesis of eight, highly conserved charged residues in putative juxta- and trans-membrane helices of FlhA. Only Asp-208 was an essential acidic residue. Most of the FlhA substitutions were tolerated, but resulted in loss-of-function in the ΔfliH-fliI mutant background, even with the second-site flhB(P28T) mutation that increases the probability of flagellar protein export in the absence of FliH and FliI. The addition of FliH and FliI allowed the D45A, R85A, R94K and R270A mutant proteins to work even in the presence of the flhB(P28T) mutation. Suppressor analysis of a flhA(K203W) mutation showed an interaction between FlhA and FliR. Taken all together, we suggest that Asp-208 is directly involved in PMF-driven protein export and that the cooperative interactions of FlhA with FlhB, FliH, FliI, and FliR drive the translocation of export substrate.

Purification, crystallization and preliminary X-ray crystallographic analysis of the C-terminal cytoplasmic domain of FlhB from Salmonella typhimurium

FlhB is a key protein in the regulation of protein export by the bacterial flagellar secretion system. It is composed of two domains: an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhBc). FlhBc from Salmonella typhimurium has been successfully crystallized using the vapour-diffusion method. The crystals diffracted to 2.45 Å resolution and belonged to space group P4(2)2(1)2, with unit-cell parameters a=b=49.06, c=142.94 Å. A selenomethionine-containing variant of FlhBc has also been crystallized in the same space group and was used for initial phase calculation by the multiwavelength anomalous dispersion (MAD) method.

Purification, crystallization and preliminary X-ray crystallographic analysis of the C-terminal cytoplasmic domain of FlhB from Aquifex aeolicus

FlhB is a key protein in the regulation of protein export by the bacterial flagellar secretion system. It is composed of two domains: an N-terminal transmembrane domain and a C-terminal cytoplasmic domain (FlhBc). Here, the crystallization and preliminary crystallographic analysis of FlhBc from Aquifex aeolicus are reported. Purified protein was crystallized using the vapour-diffusion technique. The crystals diffracted to 2.3 Å resolution and belonged to space group C2, with unit-cell parameters a = 114.49, b = 33.89, c = 122.13 Å, β = 107.53°.

Membrane topology of conserved components of the type III secretion system from the plant pathogen Xanthomonas campestris pv. vesicatoria

Type III secretion (T3S) systems play key roles in the assembly of flagella and the translocation of bacterial effector proteins into eukaryotic host cells. Eleven proteins which are conserved among Gram-negative plant and animal pathogenic bacteria have been proposed to build up the basal structure of the T3S system, which spans both inner and outer bacterial membranes. We studied six conserved proteins, termed Hrc, predicted to reside in the inner membrane of the plant pathogen Xanthomonas campestris pv. vesicatoria. The membrane topology of HrcD, HrcR, HrcS, HrcT, HrcU and HrcV was studied by translational fusions to a dual alkaline phosphatase–β-galactosidase reporter protein. Two proteins, HrcU and HrcV, were found to have the same membrane topology as the Yersinia homologues YscU and YscV. For HrcR, the membrane topology differed from the model for the homologue from Yersinia, YscR. For our data on three other protein families, exemplified by HrcD, HrcS and HrcT, we derived the first topology models. Our results provide what is believed to be the first complete model of the inner membrane topology of any bacterial T3S system and will aid in elucidating the architecture of T3S systems by ultrastructural analysis.

Structure of the cytoplasmic domain of FlhA and implication for flagellar type III protein export

FlhA is the largest integral membrane component of the flagellar type III protein export apparatus of Salmonella and is composed of an N-terminal transmembrane domain (FlhA(TM)) and a C-terminal cytoplasmic domain (FlhA(C)). FlhA(C) is thought to form a platform of the export gate for the soluble components to bind to for efficient delivery of export substrates to the gate. Here, we report a structure of FlhA(C) at 2.8 A resolution. FlhA(C) consists of four subdomains (A(C)D1, A(C)D2, A(C)D3 and A(C)D4) and a linker connecting FlhA(C) to FlhA(TM). The sites of temperature-sensitive (ts) mutations that impair protein export are distributed to all four domains, with half of them at subdomain interfaces. Analyses of the ts mutations and four suppressor mutations to the G368C ts mutation suggested that FlhA(C) changes its conformation for its function. Molecular dynamics simulation demonstrated an open-close motion with a 5-10 ns oscillation in the distance between A(C)D2 and A(C)D4. These results along with further mutation analyses suggest that a dynamic domain motion of FlhA(C) is essential for protein export.

The role of the FliK molecular ruler in hook-length control in Salmonella enterica

A molecular ruler, FliK, controls the length of the flagellar hook. FliK measures hook length and catalyses the secretion-substrate specificity switch from rod-hook substrate specificity to late substrate secretion, which includes the filament subunits. Here, we show normal hook-length control and filament assembly in the complete absence of the C-ring thus refuting the previous 'cup' model for hook-length control. Mutants of C-ring components, which are reported to produce short hooks, show a reduced rate of hook-basal body assembly thereby allowing for a premature secretion-substrate specificity switch. Unlike fliK null mutants, hook-length control in an autocleavage-defective mutant of flhB, the protein responsible for the switch to late substrate secretion, is completely abolished. FliK deletion variants that retain the ability to measure hook length are secreted thus demonstrating that FliK directly measures rod-hook length during the secretion process. Finally, we present a unifying model accounting for all published data on hook-length control in which FliK acts as a molecular ruler that takes measurements of rod-hook length while being intermittently secreted during the assembly process of the hook-basal body complex.

Role of the C-terminal cytoplasmic domain of FlhA in bacterial flagellar type III protein export

For construction of the bacterial flagellum, many of the flagellar proteins are exported into the central channel of the flagellar structure by the flagellar type III protein export apparatus. FlhA and FlhB, which are integral membrane proteins of the export apparatus, form a docking platform for the soluble components of the export apparatus, FliH, FliI, and FliJ. The C-terminal cytoplasmic domain of FlhA (FlhA(C)) is required for protein export, but it is not clear how it works. Here, we analyzed a temperature-sensitive Salmonella enterica mutant, the flhA(G368C) mutant, which has a mutation in the sequence encoding FlhA(C). The G368C mutation did not eliminate the interactions with FliH, FliI, FliJ, and the C-terminal cytoplasmic domain of FlhB, suggesting that the mutation blocks the export process after the FliH-FliI-FliJ-export substrate complex binds to the FlhA-FlhB platform. Limited proteolysis showed that FlhA(C) consists of at least three subdomains, a flexible linker, FlhA(CN), and FlhA(CC), and that FlhA(CN) becomes sensitive to proteolysis by the G368C mutation. Intragenic suppressor mutations were identified in these subdomains and restored flagellar protein export to a considerable degree. However, none of these suppressor mutations suppressed the protease sensitivity. We suggest that FlhA(C) not only forms part of the docking platform for the FliH-FliI-FliJ-export substrate complex but also is directly involved in the translocation of the export substrate into the central channel of the growing flagellar structure.

Genes involved in Cronobacter sakazakii biofilm formation

Cronobacter spp. are opportunistic food-borne pathogens that can cause severe and sometimes lethal infections in neonates. In some outbreaks, the sources of infection were traced to contaminated powdered infant formula (PIF) or contaminated utensils used for PIF reconstitution. In this study, we investigated biofilm formation in Cronobacter sakazakii strain ES5. To investigate the genetic basis of biofilm formation in Cronobacter on abiotic surfaces, we screened a library of random transposon mutants of strain ES5 for reduced biofilm formation using a polystyrene microtiter assay. Genetic characterization of the mutants led to identification of genes that are associated with cellulose biosynthesis and flagellar structure and biosynthesis and genes involved in basic cellular processes and virulence, as well as several genes whose functions are currently unknown. In two of the mutants, hypothetical proteins ESA_00281 and ESA_00282 had a strong impact on flow cell biofilm architecture, and their contribution to biofilm formation was confirmed by genetic complementation. In addition, adhesion of selected biofilm formation mutants to Caco-2 intestinal epithelial cells was investigated. Our findings suggest that flagella and hypothetical proteins ESA_00281 and ESA_00282, but not cellulose, contribute to adhesion of Cronobacter to this biotic surface.

Sense and sensibility: flagellum-mediated gene regulation

The flagellum, a rotary engine required for motility in many bacteria, plays key roles in gene expression. It has been known for some time that flagellar substructures serve as checkpoints that coordinate flagellar gene expression with assembly. Less well understood, however, are other more global effects on gene expression. For instance, the flagellum acts as a 'wetness' sensor in Salmonella typhimurium, and as a mechanosensor in other bacteria. Additionally, it has been implicated in a variety of bacterial processes, including biofilm formation, pathogenesis and symbiosis. Although for many of these processes it might be simply that motility is required, in other cases it seems that the flagellum plays an underappreciated role in regulating gene expression.

Interaction of FliK with the bacterial flagellar hook is required for efficient export specificity switching

FliK-FlhB interaction switches export specificity of the bacterial flagellar protein export apparatus to stop hook protein export at an appropriate timing for hook length control. The hook structure is required for the productive FliK-FlhB interaction to flip the switch but it remains unknown how it works. Here, we characterize the role of FliK in the switching probability in the absence of the hook. When RflH/Flk was missing in the hook mutants, the switching occurred at a low probability. Overproduction of FliK significantly increased the switching probability although not at the wild-type level. An in-frame deletion of residues 129 through 159 of FliK weakened the interaction with the hook protein but not with the hook-capping protein, producing polyhooks with filaments attached. We suggest that temporary association of FliK with the inner surface of the hook during FliK secretion results in a pause in the secretion process to allow the C-terminal switch domain of FliK to be positioned and appropriately oriented near FlhB for catalysing the switch and that RflH/Flk interferes with premature switch by preventing access of cytoplasmic FliK to FlhB and even that of FliK during its secretion until hook length reaches 55 nm; only then FliK(C) passes the RflH/Flk block.

Helicobacter pylori FlhB processing-deficient variants affect flagellar assembly but not flagellar gene expression

Regulation of the Helicobacter pylori flagellar gene cascade involves the transcription factors sigma(54) (RpoN), employed for expression of genes required midway through flagellar assembly, and sigma(28) (FliA), required for expression of late genes. Previous studies revealed that mutations in genes encoding components of the flagellar protein export apparatus block expression of the H. pylori RpoN and FliA regulons. FlhB is a membrane-bound component of the export apparatus that possesses a large cytoplasmic domain (FlhB(C)). The hook length control protein FliK interacts with FlhB(C) to modulate the substrate specificity of the export apparatus. FlhB(C) undergoes autocleavage as part of the switch in substrate specificity. Consistent with previous reports, deletion of flhB in H. pylori interfered with expression of RpoN-dependent reporter genes, while deletion of fliK stimulated expression of these reporter genes. In the DeltaflhB mutant, disrupting fliK did not restore expression of RpoN-dependent reporter genes, suggesting that the inhibitory effect of the DeltaflhB mutation is not due to the inability to export FliK. Amino acid substitutions (N265A and P266G) at the putative autocleavage site of H. pylori FlhB prevented processing of FlhB and export of filament-type substrates. The FlhB variants supported wild-type expression of RpoN- and FliA-dependent reporter genes. In the strain producing FlhB(N265A), expression of RpoN- and FliA-dependent reporter genes was inhibited when fliK was disrupted. In contrast, expression of these reporter genes was unaffected or slightly stimulated when fliK was disrupted in the strain producing FlhB(P266G). H. pylori HP1575 (FlhX) shares homology with the C-terminal portion of FlhB(C) (FlhB(CC)) and can substitute for FlhB(CC) in flagellar assembly. Disrupting flhX inhibited expression of a flaB reporter gene in the wild-type but not in the DeltafliK mutant or strains producing FlhB variants, suggesting a role for FlhX or FlhB(CC) in normal expression of the RpoN regulon. Taken together, these data indicate that the mechanism by which the flagellar protein export apparatus exerts control over the H. pylori RpoN regulon is complex and involves more than simply switching substrate specificity of the flagellar protein export apparatus.

Mutations in flk, flgG, flhA, and flhE that affect the flagellar type III secretion specificity switch in Salmonella enterica

Upon completion of the flagellar hook-basal body (HBB) structure, the flagellar type III secretion system switches from secreting rod/hook-type to filament-type substrates. The secretion specificity switch has been reported to occur prematurely (prior to HBB completion) in flk-null mutants (P. Aldridge, J. E. Karlinsey, E. Becker, F. F. Chevance, and K. T. Hughes, Mol. Microbiol. 60:630-643, 2006) and in distal rod gene gain-of-function mutants (flgG* mutants) that produce filamentous rod structures (F. F. Chevance, N. Takahashi, J. E. Karlinsey, J. Gnerer, T. Hirano, R. Samudrala, S. Aizawa, and K. T. Hughes, Genes Dev. 21:2326-2335, 2007). A fusion of beta-lactamase (Bla) to the C terminus of the filament-type secretion substrate FlgM was used to select for mutants that would secrete FlgM-Bla into the periplasmic space and show ampicillin resistance (Ap(r)). Ap(r) resulted from null mutations in the flhE gene, C-terminal truncation mutations in the flhA gene, null and dominant mutations in the flk gene, and flgG* mutations. All mutant classes required the hook length control protein (FliK) and the rod cap protein (FlgJ) for the secretion specificity switch to occur. However, neither the hook (FlgE) nor the hook cap (FlgD) protein was required for premature FlgM-Bla secretion in the flgG* and flk mutant strains, but it was in the flhE mutants. Unexpectedly, when deletions of either flgE or flgD were introduced into flgG* mutant strains, filaments were able to grow directly on the filamentous rod structures.

Deciphering bacterial flagellar gene regulatory networks in the genomic era

Synthesis of the bacterial flagellum is a complex process involving dozens of structural and regulatory genes. Assembly of the flagellum is a highly-ordered process, and in most flagellated bacteria the structural genes are expressed in a transcriptional hierarchy that results in the products of these genes being made as they are needed for assembly. Temporal regulation of the flagellar genes is achieved through sophisticated regulatory networks that utilize checkpoints in the flagellar assembly pathway to coordinate expression of flagellar genes. Traditionally, flagellar transcriptional hierarchies are divided into various classes. Class I genes, which are the first genes expressed, encode a master regulator that initiates the transcriptional hierarchy. The master regulator activates transcription a set of structural and regulatory genes referred to as class II genes, which in turn affect expression of subsequent classes of flagellar genes. We review here the literature on the expression and activity of several known master regulators, including FlhDC, CtrA, VisNR, FleQ, FlrA, FlaK, LafK, SwrA, and MogR. We also examine the Department of Energy Joint Genomes Institute database to make predictions about the distribution of these regulators. Many bacteria employ the alternative sigma factors sigma(54) and/or sigma(28) to regulate transcription of later classes of flagellar genes. Transcription by sigma(54)-RNA polymerase holoenzyme requires an activator, and we review the literature on the sigma(54)-dependent activators that control flagellar gene expression in several bacterial systems, as well as make predictions about other systems that may utilize sigma(54) for flagellar gene regulation. Finally, we review the prominent systems that utilize sigma(28) and its antagonist, the anti-sigma(28) factor FlgM, along with some systems that utilize alternative mechanisms for regulating flagellar gene expression.

Functional characterization of the type III secretion ATPase HrcN from the plant pathogen Xanthomonas campestris pv. vesicatoria

Many gram-negative plant and animal pathogenic bacteria employ a type III secretion (T3S) system to inject effector proteins into the cytosol of eukaryotic host cells. The membrane-spanning T3S apparatus is associated with an ATPase that presumably provides the energy for the secretion process. Here, we describe the role of the predicted ATPase HrcN from the plant pathogenic bacterium Xanthomonas campestris pathovar vesicatoria. We show that HrcN hydrolyzes ATP in vitro and is essential for T3S and bacterial pathogenicity. Stability of HrcN in X. campestris pv. vesicatoria depends on the conserved HrcL protein, which interacts with HrcN in vitro and in vivo. Both HrcN and HrcL bind to the inner membrane protein HrcU and specifically localize to the bacterial membranes under T3S-permissive conditions. Protein-protein interaction studies revealed that HrcN also interacts with the T3S substrate specificity switch protein HpaC and the global T3S chaperone HpaB, which promotes secretion of multiple effector proteins. Using an in vitro chaperone release assay, we demonstrate that HrcN dissociates a complex between HpaB and the effector protein XopF1 in an ATP-dependent manner, suggesting that HrcN is involved in the release of HpaB-bound effectors. Effector release depends on a conserved glycine residue in the HrcN phosphate-binding loop, which is crucial for enzymatic activity and protein function during T3S. There is no experimental evidence that T3S can occur in the absence of the ATPase, in contrast to recent findings reported for animal pathogenic bacteria.

Mechanisms of type III protein export for bacterial flagellar assembly

Flagellar type III protein export is highly organized and well controlled in a timely manner by dynamic, specific and cooperative interactions among components of the export apparatus, allowing the huge and complex macromolecular assembly to be built efficiently. The bacterial flagellum, which is required for motility, consists of a rotary motor, a universal joint and a helical propeller. Most of the flagellar components are translocated to the distal, growing end of the flagellum for assembly through the central channel of the flagellum itself by the flagellar type III protein export apparatus, which is postulated to be located on the cytoplasmic side of the flagellar basal body. The export specificity switching machinery, which consists of at least two proteins that function as a molecular ruler and an export switch, respectively, monitors the state of hook-basal body assembly in the cell exterior and switches export specificity, thereby coupling sequential flagellar gene expression with the flagellar assembly process. The export ATPase complex composed of an ATPase and its regulator acts as a pilot to deliver its export substrate to the export gate and helps initial entry of the substrate N-terminal chain into a narrow pore of the export gate. The energy of ATP hydrolysis appears to be used to disassemble and release the ATPase complex from the protein about to be exported, and the rest of the successive unfolding/translocation process of the long polypeptide chain is driven solely by proton motive force (PMF), perhaps through biased one-dimensional Brownian diffusion. Interestingly, the subunits of the ATPase complex have significant sequence similarities to subunits of F(0)F(1)-ATP synthase, a rotary motor that drives the chemical reaction of ATP synthesis using PMF, and the entire crystal structure of the export ATPase is extremely similar to the alpha/beta subunits of F(0)F(1)-ATP synthase, suggesting that the flagellar export apparatus and F(0)F(1)-ATP synthase share the mechanism for their two distinct functions.

Suppressor analysis of the MotB(D33E) mutation to probe bacterial flagellar motor dynamics coupled with proton translocation

MotA and MotB form the stator of the proton-driven bacterial flagellar motor, which conducts protons and couples proton flow with motor rotation. Asp-33 of Salmonella enterica serovar Typhimurium MotB, which is a putative proton-binding site, is critical for torque generation. However, the mechanism of energy coupling remains unknown. Here, we carried out genetic and motility analysis of a slowly motile motB(D33E) mutant and its pseudorevertants. We first confirmed that the poor motility of the motB(D33E) mutant is due to neither protein instability, mislocalization, nor impaired interaction with MotA. We isolated 17 pseudorevertants and identified the suppressor mutations in the transmembrane helices TM2 and TM3 of MotA and in TM and the periplasmic domain of MotB. The stall torque produced by the motB(D33E) mutant motor was about half of the wild-type level, while those for the pseudorevertants were recovered nearly to the wild-type levels. However, the high-speed rotations of the motors under low-load conditions were still significantly impaired, suggesting that the rate of proton translocation is still severely limited at high speed. These results suggest that the second-site mutations recover a torque generation step involving stator-rotor interactions coupled with protonation/deprotonation of Glu-33 but not maximum proton conductivity.

HpaC controls substrate specificity of the Xanthomonas type III secretion system

The Gram-negative bacterial plant pathogen Xanthomonas campestris pv. vesicatoria employs a type III secretion (T3S) system to inject bacterial effector proteins into the host cell cytoplasm. One essential pathogenicity factor is HrpB2, which is secreted by the T3S system. We show that secretion of HrpB2 is suppressed by HpaC, which was previously identified as a T3S control protein. Since HpaC promotes secretion of translocon and effector proteins but inhibits secretion of HrpB2, HpaC presumably acts as a T3S substrate specificity switch protein. Protein–protein interaction studies revealed that HpaC interacts with HrpB2 and the C-terminal domain of HrcU, a conserved inner membrane component of the T3S system. However, no interaction was observed between HpaC and the full-length HrcU protein. Analysis of HpaC deletion derivatives revealed that the binding site for the C-terminal domain of HrcU is essential for HpaC function. This suggests that HpaC binding to the HrcU C terminus is key for the control of T3S. The C terminus of HrcU also provides a binding site for HrpB2; however, no interaction was observed with other T3S substrates including pilus, translocon and effector proteins. This is in contrast to HrcU homologs from animal pathogenic bacteria suggesting evolution of distinct mechanisms in plant and animal pathogenic bacteria for T3S substrate recognition.

The Gram-negative plant pathogenic bacterium Xanthomonas campestris pv. vesicatoria is the causal agent of bacterial spot disease in pepper and tomato. Pathogenicity of X. campestris pv. vesicatoria depends on a type III protein secretion (T3S) system that injects bacterial effector proteins directly into the host cell cytosol. The T3S system is a highly complex nanomachine that spans both bacterial membranes and is associated with an extracellular pilus and a translocon that inserts into the host cell membrane. Given the architecture of the secretion apparatus, it is conceivable that pilus formation precedes effector protein secretion. The pilus presumably consists of two components, i.e., the major pilus subunit HrpE and HrpB2, which is required for pilus assembly. Secretion of HrpB2 is suppressed by HpaC that switches substrate specificity of the T3S system from secretion of HrpB2 to secretion of translocon and effector proteins. The substrate specificity switch depends on the cytoplasmic domain of HrcU, which is a conserved inner membrane protein of the T3S apparatus that interacts with HrpB2 and HpaC.

A genome-wide approach to identify the genes involved in biofilm formation in E. coli

Biofilm forming cells are distinctive from the well-investigated planktonic cells and exhibit a different type of gene expression. Several new Escherichia coli genes related to biofilm formation have recently been identified through genomic approaches such as DNA microarray analysis. However, many others involved in this process might have escaped detection due to poor expression, regulatory mechanism, or genetic backgrounds. Here, we screened a collection of single-gene deletion mutants of E. coli named ‘Keio collection’ to identify genes required for biofilm formation. Of the 3985 mutants of non-essential genes in the collection thus examined, 110 showed a reduction in biofilm formation nine of which have not been well characterized yet. Systematic and quantitative analysis revealed the involvement of genes of various functions and reinforced the importance in biofilm formation of the genes for cell surface structures and cell membrane. Characterization of the nine mutants of function-unknown genes indicated that some of them, such as yfgA that genetically interacts with a periplasmic chaperone gene surA together with yciB and yciM, might be required for the integrity of outer membrane.

Salmonella typhimurium flhE, a conserved flagellar regulon gene required for swarming

The Salmonella typhimurium gene flhE is located at the end of a large flagellar locus in at least 10 peritrichously flagellated Gram-negative bacterial genera, but it shares no significant similarity with other genes. This study shows that flhE is transcribed as part of an flhBAE flagellar operon, under the control of the flagellar master regulator FlhD(2)C(2). Deletion of the chromosomal flhE gene did not affect swimming motility, but it abolished swarming motility across solid agar. Swarming was restored to the DeltaflhE mutant by the 130 aa putative envelope protein FlhE, but not by a truncated version lacking the N-terminal signal peptidase I recognition sequence. The DeltaflhE mutant was indistinguishable from the wild-type parent in number and distribution of flagella, secretion of flagellin subunits, and flagellar gene expression, and there were no obvious differences in cell-surface LPS and extracellular polysaccharide. The DeltaflhE mutant was able to swarm when non-ionic surfactant was included in agar medium, and it showed differences to the wild-type in binding calcofluor and Congo red dyes, and in biofilm production. The data show that the flhE gene is part of the flagella regulon but that it has no role in flagella biogenesis. It appears, nevertheless, to act at the cell envelope to influence flagella-dependent swarming.

Helicobacter pylori FlhB function: the FlhB C-terminal homologue HP1575 acts as a "spare part" to permit flagellar export when the HP0770 FlhBCC domain is deleted

In Helicobacter pylori 26695, a gene annotated HP1575 encodes a putative protein of unknown function which shows significant similarity to part of the C-terminal domain of the flagellar export protein FlhB. In Salmonella enterica, this part (FlhB(CC)) is proteolytically cleaved from the full-length FlhB, a processing event that is required for flagellar protein export and, thus, motility. The role of FlhB (HP0770) and its C-terminal homologue HP1575 was studied in H. pylori using a range of nonpolar deletion mutants defective in HP1575, HP0770, and the CC domain of HP0770 (HP0770(CC)). Deletion of HP0770 abolished swimming motility, whereas mutants carrying a deletion of either HP1575 or HP0770(CC) retained their ability to swim. An H. pylori strain containing deletions in both HP1575 and HP0770(CC) was nonmotile and did not produce flagella, suggesting that at least one of the two proteins had to be present for flagellar assembly to occur. Indeed, motility was restored when HP1575 was reintroduced into this strain immediately downstream of, but not fused to, the truncated HP0770 gene. Thus, HP1575 can functionally replace HP0770(CC) in this background. Like FlhB in S. enterica, HP0770 appeared to be proteolytically processed at a conserved NPTH processing site. However, mutation of the proline contained within the NPTH site of HP0770 did not affect motility and flagellar assembly, although it clearly interfered with processing when the protein was heterologously produced in Escherichia coli.

Flipping the switch: bringing order to flagellar assembly

The bacterial flagellum is a complex self-assembling nanomachine that contains its own type III protein export apparatus. Upon completion of early flagellar structure, this apparatus switches substrate specificity to export late structural subunits, thereby coupling sequential flagellar gene expression with flagellar assembly. The switch is achieved by a conformational change of the export apparatus component FlhB driven by the flagellar hook-length control protein FliK. Two basic models of FliK- and FlhB-based switching are currently being pursued, together with the investigation of another factor, Flk, which prevents premature export of late substrates. Here, we review in detail each of these three export switch components and present the current understanding of how they work in concert in the making of a flagellum.