Structural differentiation of the Bacillus subtilis 168 cell wall

An exhaustive multiple knockout approach to understanding cell wall hydrolase function in Bacillus subtilis

IMPORTANCE

In order to grow, bacterial cells must both create and break down their cell wall. The enzymes that are responsible for these processes are the target of some of our best antibiotics. Our understanding of the proteins that break down the wall- cell wall hydrolases-has been limited by redundancy among the large number of hydrolases many bacteria contain. To solve this problem, we identified 42 cell wall hydrolases in Bacillus subtilis and created a strain lacking 40 of them. We show that cells can survive using only a single cell wall hydrolase; this means that to understand the growth of B. subtilis in standard laboratory conditions, it is only necessary to study a very limited number of proteins, simplifying the problem substantially. We additionally show that the ∆40 strain is a research tool to characterize hydrolases, using it to identify three "helper" hydrolases that act in certain stress conditions.

Protein secretion zones during overexpression of amylase within the Gram-positive cell wall

BACKGROUND

Whereas the translocation of proteins across the cell membrane has been thoroughly investigated, it is still unclear how proteins cross the cell wall in Gram-positive bacteria, which are widely used for industrial applications. We have studied the secretion of α-amylase AmyE within two different Bacillus strains, B. subtilis and B. licheniformis.

RESULTS

We show that a C-terminal fusion of AmyE with the fluorescent reporter mCherry is secreted via discrete patches showing very low dynamics. These are visible at many places within the cell wall for many minutes. Expression from a high copy number plasmid was required to be able to see these structures we term "secretion zones". Zones corresponded to visualized AmyE activity on the surface of cells, showing that they release active enzymes. They overlapped with SecA signals but did not frequently co-localize with the secretion ATPase. Single particle tracking showed higher dynamics of SecA and of SecDF, involved in AmyE secretion, at the cell membrane than AmyE. These experiments suggest that SecA initially translocates AmyE molecules through the cell membrane, and then diffuses to a different translocon. Single molecule tracking of SecA suggests the existence of three distinct diffusive states of SecA, which change during AmyE overexpression, but increased AmyE secretion does not appear to overwhelm the system.

CONCLUSIONS

Because secretion zones were only found during the transition to and within the stationary phase, diffusion rather than passive transport based on cell wall growth from inside to outside may release AmyE and, thus, probably secreted proteins in general. Our findings suggest active transport through the cell membrane and slow, passive transition through the cell wall, at least for overexpressed proteins, in bacteria of the genus Bacillus.

The role of cell-envelope synthesis for envelope growth and cytoplasmic density in Bacillus subtilis

All cells must increase their volumes in response to biomass growth to maintain intracellular mass density within physiologically permissive bounds. Here, we investigate the regulation of volume growth in the Gram-positive bacterium Bacillus subtilis. To increase volume, bacteria enzymatically expand their cell envelopes and insert new envelope material. First, we demonstrate that cell-volume growth is determined indirectly, by expanding their envelopes in proportion to mass growth, similarly to the Gram-negative Escherichia coli, despite their fundamentally different envelope structures. Next, we studied, which pathways might be responsible for robust surface-to-mass coupling: We found that both peptidoglycan synthesis and membrane synthesis are required for proper surface-to-mass coupling. However, surprisingly, neither pathway is solely rate-limiting, contrary to wide-spread belief, since envelope growth continues at a reduced rate upon complete inhibition of either process. To arrest cell-envelope growth completely, the simultaneous inhibition of both envelope-synthesis processes is required. Thus, we suggest that multiple envelope-synthesis pathways collectively confer an important aspect of volume regulation, the coordination between surface growth, and biomass growth.

Donor-delivered cell wall hydrolases facilitate nanotube penetration into recipient bacteria

Bacteria can produce membranous nanotubes that mediate contact-dependent exchange of molecules among bacterial cells. However, it is unclear how nanotubes cross the cell wall to emerge from the donor or to penetrate into the recipient cell. Here, we report that Bacillus subtilis utilizes cell wall remodeling enzymes, the LytC amidase and its enhancer LytB, for efficient nanotube extrusion and penetration. Nanotube production is reduced in a lytBC mutant, and the few nanotubes formed appear deficient in penetrating into target cells. Donor-derived LytB molecules localize along nanotubes and on the surface of nanotube-connected neighbouring cells, primarily at sites of nanotube penetration. Furthermore, LytB from donor B. subtilis can activate LytC of recipient bacteria from diverse species, facilitating cell wall hydrolysis to establish nanotube connection. Our data provide a mechanistic view of how intercellular connecting devices can be formed among neighbouring bacteria.

Bacteria can produce membranous nanotubes that mediate contact-dependent exchange of molecules between bacterial cells. Here, Baidya et al. show that cell-wall remodelling enzymes from Bacillus subtilis are required for efficient nanotube extrusion and penetration, and can be delivered to other bacterial species via nanotubes.

The Gram-Positive Bacterial Cell Wall

The chapter about the Gram-positive bacterial cell wall gives a brief historical background on the discovery of Gram-positive cell walls and their constituents and microscopic methods applied for studying the Gram-positive cell envelope. Followed by the description of the different chemical building blocks of peptidoglycan and the biosynthesis of the peptidoglycan layers and high turnover of peptidoglycan during bacterial growth. Lipoteichoic acids and wall teichoic acids are highlighted as major components of the cell wall. Characterization of capsules and the formation of extracellular vesicles by Gram-positive bacteria close the section on cell envelopes which have a high impact on bacterial pathogenesis. In addition, the specialized complex and unusual cell wall of mycobacteria is introduced thereafter. Next a short back view is given on the development of electron microscopic examinations for studying bacterial cell walls. Different electron microscopic techniques and methods applied to examine bacterial cell envelopes are discussed in the view that most of the illustrated methods should be available in a well-equipped life sciences orientated electron microscopic laboratory. In addition, newly developed and mostly well-established cryo-methods like high-pressure freezing and freeze-substitution (HPF-FS) and cryo-sections of hydrated vitrified bacteria (CEMOVIS, Cryo-electron microscopy of vitreous sections) are described. At last, modern cryo-methods like cryo-electron tomography (CET) and cryo-FIB-SEM milling (focus ion beam-scanning electron microscopy) are introduced which are available only in specialized institutions, but at present represent the best available methods and techniques to study Gram-positive cell walls under close-to-nature conditions in great detail and at high resolution.

Photothermal Off-Resonance Tapping for Rapid and Gentle Atomic Force Imaging of Live Cells

Imaging living cells by atomic force microscopy (AFM) promises not only high-resolution topographical data, but additionally, mechanical contrast, both of which are not obtainable with other microscopy techniques. Such imaging is however challenging, as cells need to be measured with low interaction forces to prevent either deformation or detachment from the surface. Off-resonance modes which periodically probe the surface have been shown to be advantageous, as they provide excellent force control combined with large amplitudes, which help reduce lateral force interactions. However, the low actuation frequency in traditional off-resonance techniques limits the imaging speed significantly. Using photothermal actuation, we probe the surface by directly actuating the cantilever. Due to the much smaller mass that needs to be actuated, the achievable measurement frequency is increased by two orders of magnitude. Additionally, photothermal off-resonance tapping (PORT) retains the precise force control of conventional off-resonance modes and is therefore well suited to gentle imaging. Here, we show how photothermal off-resonance tapping can be used to study live cells by AFM. As an example of imaging mammalian cells, the initial attachment, as well as long-term detachment, of human thrombocytes is presented. The membrane disrupting effect of the antimicrobial peptide CM-15 is shown on the cell wall of Escherichia coli. Finally, the dissolution of the cell wall of Bacillus subtilis by lysozyme is shown. Taken together, these evolutionarily disparate forms of life exemplify the usefulness of PORT for live cell imaging in a multitude of biological disciplines.

Metal resistance mechanisms in Gram-negative bacteria and their potential to remove Hg in the presence of other metals

Contamination of the environment by heavy metals has been increasing in recent years due to industrial activities. Thus research involving microorganisms capable of surviving in multi-contaminated environments is extremely important. The objectives of the present study were to evaluate the removal of mercury alone and in the presence of cadmium, nickel and lead by four mercury-resistant microorganisms; estimate the removal of Cd, Ni and Pb; understand the mechanisms involved (reduction, siderophores, biofilms, biosorption and bioaccumulation) in the metal resistance of the isolate Pseudomonas sp. B50D; and determine the capacity of Pseudomonas sp. B50D in removing Hg, Cd, Ni and Pb from an industrial effluent. It was shown that the four isolates evaluated were capable of removing from 62% to 95% of mercury from a culture medium with no addition of other metals. The isolate Pseudomonas sp. B50D showed the best performance in the removal of mercury when evaluated concomitantly with other metals. This isolate was capable of removing 75% of Hg in the presence of Cd and 91% in the presence of Ni and Pb. With respect to the other metals it removed 60%, 15% and 85% of Cd, Ni and Pb, respectively. In tests with effluent, the isolate Pseudomonas sp. B50D removed 85% of Hg but did not remove the other metals. This isolate presented reduction, biosorption, biofilm production and siderophore production as its metal resistance mechanisms. Pseudomonas sp. B50D was thus a candidate with potential for application in the bioremediation of effluents with complex metal contaminations.

Antimicrobial Activity of Cationic Antimicrobial Peptides against Gram-Positives: Current Progress Made in Understanding the Mode of Action and the Response of Bacteria

Antimicrobial peptides (AMPs) have been proposed as a novel class of antimicrobials that could aid the fight against antibiotic resistant bacteria. The mode of action of AMPs as acting on the bacterial cytoplasmic membrane has often been presented as an enigma and there are doubts whether the membrane is the sole target of AMPs. Progress has been made in clarifying the possible targets of these peptides, which is reported in this review with as focus gram-positive vegetative cells and spores. Numerical estimates are discussed to evaluate the possibility that targets, other than the membrane, could play a role in susceptibility to AMPs. Concerns about possible resistance that bacteria might develop to AMPs are addressed. Proteomics, transcriptomics, and other molecular techniques are reviewed in the context of explaining the response of bacteria to the presence of AMPs and to predict what resistance strategies might be. Emergent mechanisms are cell envelope stress responses as well as enzymes able to degrade and/or specifically bind (and thus inactivate) AMPs. Further studies are needed to address the broadness of the AMP resistance and stress responses observed.

Nanomechanical Characterization of Bacillus anthracis Spores by Atomic Force Microscopy

The study of structures and properties of bacterial spores is important to understanding spore formation and biological responses to environmental stresses. While significant progress has been made over the years in elucidating the multilayer architecture of spores, the mechanical properties of the spore interior are not known. Here, we present a thermal atomic force microscopy (AFM) study of the nanomechanical properties of internal structures of Bacillus anthracis spores. We developed a nanosurgical sectioning method in which a stiff diamond AFM tip was used to cut an individual spore, exposing its internal structure, and a soft AFM tip was used to image and characterize the spore interior on the nanometer scale. We observed that the elastic modulus and adhesion force, including their thermal responses at elevated temperatures, varied significantly in different regions of the spore section. Our AFM images indicated that the peptidoglycan (PG) cortex of Bacillus anthracis spores consisted of rod-like nanometer-sized structures that are oriented in the direction perpendicular to the spore surface. Our findings may shed light on the spore architecture and properties.

IMPORTANCE

A nanosurgical AFM method was developed that can be used to probe the structure and properties of the spore interior. The previously unknown ultrastructure of the PG cortex of Bacillus anthracis spores was observed to consist of nanometer-sized rod-like structures that are oriented in the direction perpendicular to the spore surface. The variations in the nanomechanical properties of the spore section were largely correlated with its chemical composition. Different components of the spore materials showed different thermal responses at elevated temperatures.

Synthetic lethality of the lytE cwlO genotype in Bacillus subtilis is caused by lack of D,L-endopeptidase activity at the lateral cell wall

Bacterial peptidoglycan acts as an exoskeleton to protect the bacterial cell. Although peptidoglycan biosynthesis by penicillin-binding proteins is well studied, few studies have described peptidoglycan disassembly, which is necessary for a dynamic structure that allows cell growth. In Bacillus subtilis, more than 35 genes encoding cell wall lytic enzymes have been identified; however, only two D,L-endopeptidases (lytE and cwlO) are involved in cell proliferation. In this study, we demonstrated that the D,L-endopeptidase activity at the lateral cell wall is essential for cell proliferation. Inactivation of LytE and CwlO by point mutation of the catalytic residues caused cell growth defects. However, the forced expression of LytF or CwlS, which are paralogs of LytE, did not suppress lytE cwlO synthetic lethality. Subcellular localization studies of these D,L-endopeptidases showed LytF and CwlS at the septa and poles, CwlO at the cylindrical part of the cell, and LytE at the septa and poles as well as the cylindrical part. Furthermore, construction of N-terminal and C-terminal domain-swapped enzymes of LytE, LytF, CwlS, and CwlO revealed that localization was dependent on the N-terminal domains. Only the chimeric proteins that were enzymatically active and localized to the sidewall were able to suppress the synthetic lethality, suggesting that the lack of D,L-endopeptidase activity at the cylindrical part of the cell leads to a growth defect. The functions of LytE and CwlO in cell morphogenesis were discussed.

Preservation of protein globules and peptidoglycan in the mineralized cell wall of nitrate-reducing, iron(II)-oxidizing bacteria: a cryo-electron microscopy study

Iron-oxidizing bacteria are important actors of the geochemical cycle of iron in modern environments and may have played a key role all over Earth's history. However, in order to better assess that role on the modern and the past Earth, there is a need for better understanding the mechanisms of bacterial iron oxidation and for defining potential biosignatures to be looked for in the geologic record. In this study, we investigated experimentally and at the nanometre scale the mineralization of iron-oxidizing bacteria with a combination of synchrotron-based scanning transmission X-ray microscopy (STXM), scanning transmission electron microscopy (STEM) and cryo-transmission electron microscopy (cryo-TEM). We show that the use of cryo-TEM instead of conventional microscopy provides detailed information of the successive iron biomineralization stages in anaerobic nitrate-reducing iron-oxidizing bacteria. These results suggest the existence of preferential Fe-binding and Fe-oxidizing sites on the outer face of the plasma membrane leading to the nucleation and growth of Fe minerals within the periplasm of these cells that eventually become completely encrusted. In contrast, the septa of dividing cells remain nonmineralized. In addition, the use of cryo-TEM offers a detailed view of the exceptional preservation of protein globules and the peptidoglycan within the Fe-mineralized cell walls of these bacteria. These organic molecules and ultrastructural details might be protected from further degradation by entrapment in the mineral matrix down to the nanometre scale. This is discussed in the light of previous studies on the properties of Fe-organic interactions and more generally on the fossilization of mineral-organic assemblies.

Bacteriophage infection in rod-shaped gram-positive bacteria: evidence for a preferential polar route for phage SPP1 entry in Bacillus subtilis

Entry into the host bacterial cell is one of the least understood steps in the life cycle of bacteriophages. The different envelopes of Gram-negative and Gram-positive bacteria, with a fluid outer membrane and exposing a thick peptidoglycan wall to the environment respectively, impose distinct challenges for bacteriophage binding and (re)distribution on the bacterial surface. Here, infection of the Gram-positive rod-shaped bacterium Bacillus subtilis by bacteriophage SPP1 was monitored in space and time. We found that SPP1 reversible adsorption occurs preferentially at the cell poles. This initial binding facilitates irreversible adsorption to the SPP1 phage receptor protein YueB, which is encoded by a putative type VII secretion system gene cluster. YueB was found to concentrate at the cell poles and to display a punctate peripheral distribution along the sidewalls of B. subtilis cells. The kinetics of SPP1 DNA entry and replication were visualized during infection. Most of the infecting phages DNA entered and initiated replication near the cell poles. Altogether, our results reveal that the preferentially polar topology of SPP1 receptors on the surface of the host cell determines the site of phage DNA entry and subsequent replication, which occurs in discrete foci.

The genome sequence of the rumen methanogen Methanobrevibacter ruminantium reveals new possibilities for controlling ruminant methane emissions

BACKGROUND

Methane (CH(4)) is a potent greenhouse gas (GHG), having a global warming potential 21 times that of carbon dioxide (CO(2)). Methane emissions from agriculture represent around 40% of the emissions produced by human-related activities, the single largest source being enteric fermentation, mainly in ruminant livestock. Technologies to reduce these emissions are lacking. Ruminant methane is formed by the action of methanogenic archaea typified by Methanobrevibacter ruminantium, which is present in ruminants fed a wide variety of diets worldwide. To gain more insight into the lifestyle of a rumen methanogen, and to identify genes and proteins that can be targeted to reduce methane production, we have sequenced the 2.93 Mb genome of M. ruminantium M1, the first rumen methanogen genome to be completed.

METHODOLOGY/PRINCIPAL FINDINGS

The M1 genome was sequenced, annotated and subjected to comparative genomic and metabolic pathway analyses. Conserved and methanogen-specific gene sets suitable as targets for vaccine development or chemogenomic-based inhibition of rumen methanogens were identified. The feasibility of using a synthetic peptide-directed vaccinology approach to target epitopes of methanogen surface proteins was demonstrated. A prophage genome was described and its lytic enzyme, endoisopeptidase PeiR, was shown to lyse M1 cells in pure culture. A predicted stimulation of M1 growth by alcohols was demonstrated and microarray analyses indicated up-regulation of methanogenesis genes during co-culture with a hydrogen (H(2)) producing rumen bacterium. We also report the discovery of non-ribosomal peptide synthetases in M. ruminantium M1, the first reported in archaeal species.

CONCLUSIONS/SIGNIFICANCE

The M1 genome sequence provides new insights into the lifestyle and cellular processes of this important rumen methanogen. It also defines vaccine and chemogenomic targets for broad inhibition of rumen methanogens and represents a significant contribution to worldwide efforts to mitigate ruminant methane emissions and reduce production of anthropogenic greenhouse gases.

Soft X-ray spectro-tomography study of cyanobacterial biomineral nucleation

Quantitative three-dimensional (3D) chemical mapping using angle-scan spectro-tomography in a scanning transmission (soft) X-ray microscope (STXM) has been used for the first time to characterize the early stages of CaCO(3) biomineral nucleation on the surface of planktonic freshwater cyanobacterial cells of the strain Synechococcus leopoliensis PCC 7942. The apparatus for STXM angle-scan tomography is described. Aspects of sample preparation, sample mounting and data acquisition and quantitative analysis and interpretation are discussed in detail. Angle-scan tomography and chemically selective 3D imaging at multiple photon energies has been combined with a complete 2D spectromicroscopic characterization of the biochemical and mineralogical composition. This has provided detailed insights into the mechanisms of mineral nucleation, leading to development of a detailed model of CaCO(3) nucleation by the cyanobacterial strain S. leopoliensis PCC 7942. It shows that Ca is absorbed by the extracellular polymeric substances (EPS) of the cyanobacteria and that CaCO(3) with aragonite-like short-range order is precipitated rather homogeneously within the EPS. The precipitation of the thermodynamically more stable calcite polymorph then starts at Ca-rich hot spots within the EPS and close to the cyanobacteria.

Conformation of the phosphate D-alanine zwitterion in bacterial teichoic acid from nuclear magnetic resonance spectroscopy

The conformation of d-alanine (d-Ala) groups of bacterial teichoic acid is a central, yet untested, paradigm of microbiology. The d-Ala binds via the C-terminus, thereby allowing the amine to exist as a free cationic NH(3)(+) group with the ability to form a contact ion pair with the nearby anionic phosphate group. This conformation hinders metal chelation by the phosphate because the zwitterion pair is charge neutral. To the contrary, the repulsion of cationic antimicrobial peptides (CAMPs) is attributed to the presence of the d-Ala cation; thus the ion pair does not form in this model. Solid-state nuclear magnetic resonance (NMR) spectroscopy has been used to measure the distance between amine and phosphate groups within cell wall fragments of Bacillus subtilis. The bacteria were grown on media containing (15)N d-Ala and beta-chloroalanine racemase inhibitor. The rotational-echo double-resonance (REDOR) pulse sequence was used to measure the internuclear dipolar coupling, and the results demonstrate (1) the metal-free amine-to-phosphate distance is 4.4 A and (2) the amine-to-phosphate distance increases to 5.4 A in the presence of Mg(2+) ions. As a result, the zwitterion exists in a nitrogen-oxygen ion pair configuration providing teichoic acid with a positive charge to repel CAMPs. Additionally, the amine of d-Ala does not prevent magnesium chelation in contradiction to the prevailing view of teichoic acids in metal binding. Thus, the NMR-based description of teichoic acid structure resolves the contradictory models, advances the basic understanding of cell wall biochemistry, and provides possible insight into the creation of new antibiotic therapies.

The potential of subterranean microbes in facilitating actinide migration at the Grimsel Test Site and Waste Isolation Pilot Plant

Microorganisms may affect the long-term stability and mobility of radionuclides disposed of in deep geological formations. Of particular concern is the association of radionuclides with subterranean microbial cells and their subsequent transport as biocolloids. We characterized the total microbial populations in two groundwater samples: one from the Culebra dolomite member of the Rustler Formation at the Waste Isolation Pilot Plant (WIPP), NM, and the other from the granitic formation at the Grimsel Test Site (GTS), Switzerland. Culebra groundwater (ionic strength 2.8 M, pH 7) contained 1.51 ± 1.08 × 105cells ml-1, with a mean cell length of 0.75 ± 0.04 μm and width of 0.58 ± 0.02 μm. In contrast, low ionic-strength GTS groundwater (0.001 M, pH 10) contained 3.97 ± 0.37 × 103cells ml-1, with a mean cell length of 1.50 ± 0.14 μm and width of 0.37 ± 0.01 μm. Adding appropriate electron donors and acceptors to the groundwaters facilitated the growth of aerobic, denitrifying, fermentative, and acetogenic microorganisms. Uranium biosorption was studied in two isolates from these groundwaters, as well as several pure cultures from saline and non-saline environments. Halophilic and non-halophilic bacteria exhibited differences in the amount of U associated with the cells. Plutonium uptake by Acetobacterium sp. isolated from GTS varied from 30 - 145 pg of Pu mg-1dry weight of cells.

Disruption of D-alanyl esterification of Staphylococcus aureus cell wall teichoic acid by the {beta}-lactam resistance modifier (-)-epicatechin gallate

OBJECTIVES

The naturally occurring polyphenol (-)-epicatechin gallate (ECg) increases oxacillin susceptibility in mecA-containing strains of Staphylococcus aureus. Decreased susceptibility to lysostaphin suggests alterations to the wall teichoic acid (WTA) content of ECg-grown bacteria. Changes in WTA structure in response to ECg were determined.

METHODS

Nuclear magnetic resonance spectroscopy of purified monomers from S. aureus was used to elucidate WTA structures. Molecular modelling of WTA chains was employed to determine their spatial configuration.

RESULTS

ECg-grown methicillin-resistant S. aureus (MRSA) strains BB568 and EMRSA-16 displayed markedly reduced resistance to oxacillin, had thickened cell walls and separated poorly. Growth in ECg-supplemented medium reduced the substitution of the WTA backbone by d-alanine (d-Ala); ratios of N-acetyl glucosamine to d-Ala were reduced from 0.6 and 0.49 (for BB568 and EMRSA-16) to 0.3 and 0.28, respectively. Molecular simulations indicated a decrease in the positive charge of the bacterial wall, confirmed by increased binding of cationized ferritin, and an increase in WTA chain flexibility to a random coil conformation.

CONCLUSIONS

Structural elucidation and molecular modelling of WTA indicated that conformational changes associated with reduced d-Ala substitution may contribute to the increased susceptibility of MRSA to beta-lactam antibiotics and account for other elements of the ECg-induced phenotype.

Lipoteichoic acid is a major component of the Bacillus subtilis periplasm

Cryo-electron microscopy (cryo-EM) of frozen-hydrated specimens allows high-resolution observation of structures in optimally preserved samples. In gram-positive bacteria, this method reveals the presence of a periplasmic space between the plasma membrane and an often differentiated cell wall matrix. Since virtually nothing is known about the composition of its constituent matter (i.e., the periplasm), it is still unclear what structures (or mechanism) sustain a gram-positive periplasmic space. Here we have used cryo-EM of frozen-hydrated sections in combination with various labels to probe the model gram-positive organism Bacillus subtilis for major periplasmic components. Incubation of cells with positively charged gold nanoparticles showed almost similar levels of gold binding to the periplasm and the cell wall. On cells whose cell walls were enzymatically hydrolyzed (i.e., on protoplasts), a surface diffuse layer extending approximately 30 nm from the membrane was revealed. The thickness and density of this layer were not significantly altered after treatment with a nonspecific protease, whereas it was labeled with anti-lipoteichoic acid (LTA) antibodies conjugated to nanogold. Further, the LTA layer spans most of the thickness of the periplasmic space, which strongly suggests that LTA is a major component of the B. subtilis periplasm.

Molecular control of bacterial death and lysis

Although the phenomenon of bacterial cell death and lysis has been studied for over 100 years, the contribution of these important processes to bacterial physiology and development has only recently been recognized. Contemporary study of cell death and lysis in a number of different bacteria has revealed that these processes, once thought of as being passive and unregulated, are actually governed by highly complex regulatory systems. An emerging paradigm in this field suggests that, analogous to programmed cell death in eukaryotes, regulated cell death and lysis in bacteria play an important role in both developmental processes, such as competence and biofilm development, and the elimination of damaged cells, such as those irreversibly injured by environmental or antibiotic stress. Further study in this exciting field of bacterial research may provide new insight into the potential evolutionary link between control of cell death in bacteria and programmed cell death (apoptosis) in eukaryotes.

Stability of lead(II) complexes of alginate oligomers

The current work reports on the Pb(ll) complexes formed with oligomeric uronic acids (carboxylated saccharide residues) found polymerized in the cell walls and envelopes of algae and bacteria alike. The application of partial acid hydrolysis, size-exclusion chromatography (SEC), 1H NMR, and scanned deposition stripping chronopotentiometry (SSCP) has permitted the determination of stability constants for Pb(II) with both mannuronic (M) and guluronic (G) acid oligomers ranging from the dimer to the pentamer. The determined logarithm of the stability constants range between 4.11 +/- 0.05 and 5.00 +/- 0.04 mol(-1) x dm3 for the eight oligomers studied (pH 6; I = 0.1 mol x dm(-3)). Additional experiments under the same experimental conditions employing galacturonic and glucuronic acid oligomers yielded slightly lower values (2.19 +/- 0.10 to 4.02 +/- 0.07 mol(-1) x dm3) that were expected based on their structure, whereby the monomers which were not included in the alginate oligomer series (unavailable by SEC), yielded the lowest stability constants. This work demonstrates the applicability of the SSCP technique for the determination of stability constants for metal-ligand complexes in which the ligands display relatively low molecular mass. Previous studies on heavy metal interaction with the matrix polysaccharide alginate have largely been restricted to the whole polymer that forms a gel upon binding to network bridging ions such as calcium. The results will be discussed in this context with the emphasis being placed on the relevance of these findings to processes occurring at the biointerface and results from the relevant literature.

Microscopic examination in vivo and in vitro of natural and cross-linked polyunsaturated mclPHA

Pseudomonas aeruginosa 42A2 produces a polyunsaturated polyhydroxyalkanoates (PHA-L) when grown on linseed oil as a substrate. Its high unsaturation content (36.5%) provides highly reactive PHA-L, generating a cross-linked biopolymer after ultraviolet (UV) irradiation. Both PHAs (PHA-L and uvPHA-L) were characterized by nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, gas chromatography-mass spectrometry and differential scanning calorimetry-thermogravimetric analysis. The structural analysis of the new polymer revealed a dramatic decrease in unsaturated monomer content (8.5%), due to the complete disappearance of the polyunsaturated monomers (C(12:2), C(14:2), and C(14:3)). The cross-linking reaction was also confirmed by atomic force microscopy (AFM) and transmission electron microscopy. AFM showed morphological changes in bacteria cells with and without PHA granules. The microscope techniques provided us with micrographs of the native and cross-linked polymers, showing the formation of a reticular structure as the consequence of the cross-linking reaction.

Mammalian antimicrobial proteins and peptides: overview on the RNase A superfamily members involved in innate host defence

The review starts with a general outlook of the main mechanisms of action of antimicrobial proteins and peptides, with the final aim of understanding the biological function of antimicrobial RNases, and identifying the key events that account for their selective properties. Although most antibacterial proteins and peptides do display a wide-range spectrum of action, with a cytotoxic activity against bacteria, fungi, eukaryotic parasites and viruses, we have only focused on their bactericidal activity. We start with a detailed description of the main distinctive structural features of the bacteria target and on the polypeptides, which act as selective host defence weapons.Following, we include an overview of all the current available information on the mammalian RNases which display an antimicrobial activity. There is a wealth of information on the structural, catalytic mechanism and evolutionary relationships of the RNase A superfamily. The bovine pancreatic RNase A (RNase A), the reference member of the mammalian RNase family, has been the main research object of several Nobel laureates in the 60s, 70s and 80s. A potential antimicrobial function was only recently suggested for several members of this family. In fact, the recent evolutionary studies indicate that this protein family may have started off with a host defence function. Antimicrobial RNases constitute an interesting example of proteins involved in the mammalian innate immune defence system. Besides, there is wealth of available information on the mechanism of action of short antimicrobial peptides, but little is known on larger polypeptides, that is, on proteins. Therefore, the identification of the mechanisms of action of antimicrobial RNases would contribute to the understanding of the proteins involved in the innate immunity.

Granular layer in the periplasmic space of gram-positive bacteria and fine structures of Enterococcus gallinarum and Streptococcus gordonii septa revealed by cryo-electron microscopy of vitreous sections

High-resolution structural information on optimally preserved bacterial cells can be obtained with cryo-electron microscopy of vitreous sections. With the help of this technique, the existence of a periplasmic space between the plasma membrane and the thick peptidoglycan layer of the gram-positive bacteria Bacillus subtilis and Staphylococcus aureus was recently shown. This raises questions about the mode of polymerization of peptidoglycan. In the present study, we report the structure of the cell envelope of three gram-positive bacteria (B. subtilis, Streptococcus gordonii, and Enterococcus gallinarum). In the three cases, a previously undescribed granular layer adjacent to the plasma membrane is found in the periplasmic space. In order to better understand how nascent peptidoglycan is incorporated into the mature peptidoglycan, we investigated cellular regions known to represent the sites of cell wall production. Each of these sites possesses a specific structure. We propose a hypothetic model of peptidoglycan polymerization that accommodates these differences: peptidoglycan precursors could be exported from the cytoplasm to the periplasmic space, where they could diffuse until they would interact with the interface between the granular layer and the thick peptidoglycan layer. They could then polymerize with mature peptidoglycan. We report cytoplasmic structures at the E. gallinarum septum that could be interpreted as cytoskeletal elements driving cell division (FtsZ ring). Although immunoelectron microscopy and fluorescence microscopy studies have demonstrated the septal and cytoplasmic localization of FtsZ, direct visualization of in situ FtsZ filaments has not been obtained in any electron microscopy study of fixed and dehydrated bacteria.

Probiotic bacteria as potential detoxification tools: assessing their heavy metal binding isotherms

Dietary exposure to heavy metals may have detrimental effects on human and animal health, even at low concentrations. Specific probiotic bacteria may have properties that enable them to bind toxins from food and water. We assessed the interaction of probiotic bacteria with cadmium and lead in vitro as an initial screening step to identify strains for heavy metal decontamination in food and intestinal models. Binding isotherms for cadmium and lead were characterized for Lactobacillus rhamnosus LC-705, Propionibacterium freudenreichii subsp. shermanii JS and a mix of them used by the food industry. Differences among the strains and their combinations in binding performance at a range of concentrations between 0.1 and 100 mg·L–1 were evaluated with the Langmuir model for biosorption. The effects of pH, contact time, and viability on the binding capacities were also investigated. All strains and their combinations were found to bind cadmium and lead efficiently at low concentration ranges commonly observed in foods. However, the two strains and their combinations differed significantly in their maximum binding capacities and affinities represented by the Langmuir constants Qmax and b, respectively. The binding seemed to occur instantaneously and in a pH-dependent manner, which can be perfectly described by a segmented linear–plateau model.Key words: probiotics, cadmium, lead, binding, Langmuir.

Native cell wall organization shown by cryo-electron microscopy confirms the existence of a periplasmic space in Staphylococcus aureus

The current perception of the ultrastructure of gram-positive cell envelopes relies mainly on electron microscopy of thin sections and on sample preparation. Freezing of cells into a matrix of amorphous ice (i.e., vitrification) results in optimal specimen preservation and allows the observation of cell envelope boundary layers in their (frozen) hydrated state. In this report, cryo-transmission electron microscopy of frozen-hydrated sections of Staphylococcus aureus D2C was used to examine cell envelope organization. A bipartite wall was positioned above the plasma membrane and consisted of a 16-nm low-density inner wall zone (IWZ), followed by a 19-nm high-density outer wall zone (OWZ). Observation of plasmolyzed cells, which were used to artificially separate the membrane from the wall, showed membrane vesicles within the space associated with the IWZ in native cells and a large gap between the membrane and OWZ, suggesting that the IWZ was devoid of a cross-linked polymeric cell wall network. Isolated wall fragments possessed only one zone of high density, with a constant level of density throughout their thickness, as was previously seen with the OWZs of intact cells. These results strongly indicate that the IWZ represents a periplasmic space, composed mostly of soluble low-density constituents confined between the plasma membrane and OWZ, and that the OWZ represents the peptidoglycan-teichoic acid cell wall network with its associated proteins. Cell wall differentiation was also seen at the septum of dividing cells. Here, two high-density zones were sandwiched between three low-density zones. It appeared that the septum consisted of an extension of the IWZ and OWZ from the outside peripheral wall, plus a low-density middle zone that separated adjacent septal cross walls, which could contribute to cell separation during division.

The Ectodomain of the Viral Receptor YueB Forms a Fiber That Triggers Ejection of Bacteriophage SPP1 DNA

The irreversible binding of bacteriophages to their receptor(s) in the host cell surface triggers release of the naked genome from the virion followed by transit of viral DNA to the host cell cytoplasm. We have purified, for the first time, a receptor from a Gram-positive bacterium that is active to trigger viral DNA ejection in vitro. This extracellular region ("ectodomain") of the Bacillus subtilis protein YueB (YueB780) was a 7 S elongated dimer forming a 36.5-nm-long fiber. YueB780 bound to the tail tip of bacteriophage SPP1. Although a stable receptor-phage interaction occurred between 0 and 37 degrees C, complete blocking of phage DNA release or partial ejection events were observed at temperatures below 15 degrees C. We also showed that the receptor was exposed to the B. subtilis surface. YueB differed structurally from phage receptors from Gram-negative bacteria. Its properties revealed a fiber spanning the full length of the 30-nm-thick peptidoglycan layer. The fiber is predicted to be anchored in the cell membrane through transmembrane segments. These features, highly suitable for a virus receptor in Gram-positive bacteria, are very likely shared by a large number of phage receptors.

High-resolution visualization of Pseudomonas aeruginosa PAO1 biofilms by freeze-substitution transmission electron microscopy

High-pressure freeze-substitution and transmission electron microscopy have been used for high-resolution imaging of the natural structure of a gram-negative biofilm. Unlike more conventional embedding techniques, this method confirms many of the observations seen by confocal microscopy but with finer structural detail. It further reveals that there is a structural complexity to biofilms at both the cellular and extracellular matrix levels that has not been seen before. Different domains of healthy and lysed cells exist randomly dispersed within a single biofilm as well as different structural organizations of exopolymers. Particulate matter is suspended within this network of fibers and appears to be an integral part of the exopolymeric substance (EPS). O-side chains extending from the outer membrane are integrated into EPS polymers so as to form a continuum. Together, the results support the concept of physical microenvironments within biofilms and show a complexity that was hitherto unknown.

Cryo-electron microscopy reveals native polymeric cell wall structure in Bacillus subtilis 168 and the existence of a periplasmic space

Ultrarapid freezing of bacteria (i.e. vitrification) results in optimal preservation of native structure. In this study, cryo-transmission electron microscopy of frozen-hydrated sections was used to gain insight into the organization of the Bacillus subtilis 168 cell envelope. A bipartite structure was seen above the plasma membrane consisting of a low-density 22 nm region above which a higher-density 33 nm region or outer wall zone (OWZ) resided. The interface between these two regions appeared to possess the most mass. In intact and in teichoic acid-extracted wall fragments, only a single region was seen but the mass distribution varied from being dense on the inside to less dense on the outside (i.e. similar to the OWZ). In plasmolysed cells, the inner wall zone (IWZ)'s thickness expanded in size but the OWZ's thickness remained constant. As the IWZ expanded it became filled with plasma membrane vesicles indicating that the IWZ had little substance and was empty of the wall's polymeric network of peptidoglycan and teichoic acid. Together these results strongly suggest that the inner zone actually represents a periplasmic space confined between the plasma membrane and the wall matrix and that the OWZ is the peptidoglycan-teichoic acid polymeric network of the wall.

A continuum of anionic charge: structures and functions of D-alanyl-teichoic acids in gram-positive bacteria

Teichoic acids (TAs) are major wall and membrane components of most gram-positive bacteria. With few exceptions, they are polymers of glycerol-phosphate or ribitol-phosphate to which are attached glycosyl and D-alanyl ester residues. Wall TA is attached to peptidoglycan via a linkage unit, whereas lipoteichoic acid is attached to glycolipid intercalated in the membrane. Together with peptidoglycan, these polymers make up a polyanionic matrix that functions in (i) cation homeostasis; (ii) trafficking of ions, nutrients, proteins, and antibiotics; (iii) regulation of autolysins; and (iv) presentation of envelope proteins. The esterification of TAs with D-alanyl esters provides a means of modulating the net anionic charge, determining the cationic binding capacity, and displaying cations in the wall. This review addresses the structures and functions of D-alanyl-TAs, the D-alanylation system encoded by the dlt operon, and the roles of TAs in cell growth. The importance of dlt in the physiology of many organisms is illustrated by the variety of mutant phenotypes. In addition, advances in our understanding of D-alanyl ester function in virulence and host-mediated responses have been made possible through targeted mutagenesis of dlt. Studies of the mechanism of D-alanylation have identified two potential targets of antibacterial action and provided possible screening reactions for designing novel agents targeted to D-alanyl-TA synthesis.

In Bacillus subtilis W23, the duet sigmaXsigmaM, two sigma factors of the extracytoplasmic function subfamily, are required for septum and wall synthesis under batch culture conditions

The synthesis of poly(RboP), the main Bacillus subtilis W23 teichoic acid, is encoded by tarDF-tarABIJKL operons, the latter being controlled by two promoters designated PtarA-int and PtarA-ext. Analysis by lacZ fusions reveals that PtarA-int activity exhibits sharp increases at the beginning and end of the transition between exponential and stationary growth phase. As confirmed by mRNA quantification, these increases are mediated by ECF sigma factors sigmaX and sigmaM respectively. In liquid media, strain W23 sigX sigM double mutants experience serious difficulties in the transition and stationary growth phases. Inactivation of sigmaX- and sigmaM-controlled regulons, which precludes transcription from PtarA-int, leads to (i) delays in chromosome segregation and septation and (ii) a transient loss of up to 30% of the culture OD or lysis. However, specific inactivation of PtarA-int, leading mainly to a shortage of poly(RboP), does not affect growth while, nevertheless, interfering with normal septation, as revealed by electron microscopy. The different sigM transcription in strains W23 and 168 is discussed. In W23, expression of tarA and sigM, which is shown to control divIC, is inversely correlated with growth rate, suggesting that the sigM regulon is involved in the control of cell division.

Tertiary structure of bacterial murein: the scaffold model

Although the chemical structure and physical properties of peptidoglycan have been elucidated for some time, the precise three-dimensional organization of murein has remained elusive. Earlier published computer simulations of the bacterial murein architecture modeled peptidoglycan strands in either a regular (D. Pink, J. Moeller, B. Quinn, M. Jericho, and T. Beveridge, J. Bacteriol. 182: 5925-5930, 2000) or an irregular (A. Koch, J. Theor. Biol. 204: 533-541, 2000) parallel orientation with respect to the plasma membrane. However, after integrating published experimental data on glycan chain length distribution and the degree of peptide side chain cross-linking into this computer simulation, we now report that the proposed planar network of murein appears largely dysfunctional. In contrast, a scaffold model of murein architecture, which assumes that glycan strands extend perpendicularly to the plasma membrane, was found to accommodate published experimental evidence and yield a viable stress-bearing matrix. Moreover, this model is in accordance with the well-established principle of murein assembly in vivo, i.e., sequential attachment of strands to the preexisting structure. For the first time, the phenomenon of division plane alternation in dividing bacteria can be reconciled with a computer model of the molecular architecture of murein.

Bacillus anthracis cell envelope components

Bacillus anthracis is a Gram-positive bacterium harboring a complex parietal architecture. The cytoplasmic membrane is surrounded by a thick peptidoglycan of the A1 gamma type. Only one associated polymer, a polysaccharide composed of galactose, N-acetylglucosamine, and N-acetylmannosamine, is covalently linked to the peptidoglycan. Outside the cell wall is an S-layer. Two proteins can each compose the S-layer. They are noncovalently anchored to the cell wall polysaccharide by their SLH N-terminal domain. The poly-gamma-D-glutamate capsule, which covers the S-layer, has an antiphagocytic role and its synthesis is dependent on environmental factors mimicking the mammalian host, such as bicarbonate and a temperature of 37 degrees C.

Evidence that the cell wall of Bacillus subtilis is protonated during respiration

Several independent experiments suggest that cell walls of Bacillus subtilis are protonated during growth. When cells were grown in the presence of fluorescein-labeled dextran to saturate the cell walls, centrifuged, and suspended in PBS, fluorescence-activated cell sorter analyses revealed the bacteria were only poorly fluorescent. In contrast, when the bacteria were purged with N(2) to dissipate protonmotive force (pmf) fluorescence became intense. Upon reconstitution of the pmf with phenazine methosulfate, glucose, and oxygen, fluorescence declined. Another approach used pH-dependent chemical modification of cell walls. The walls of respiring B. subtilis cells were amenable to carboxylate modification by [(14)C]ethanolamine and 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The carbodiimide activation of carboxylate groups occurs only in acidic conditions. Upon dissipation of pmf the walls were refractory to chemical modification. Ammonium groups can be condensed with FITC in alkaline medium, but the condensation is very slow in acidic buffers. It was found that the derivatization of the walls with FITC could occur in the absence of pmf. The use of pH-dependent fluorophores and pH-dependent chemical modification reactions suggest that cell walls of respiring B. subtilis cells have a relatively low pH environment. This study shows a bacterium has a protonated compartment. Acidification of cell walls during growth may be one means of regulating autolytic enzymes.

Periplasm, periplasmic spaces, and their relation to bacterial wall structure: novel secretion of selected periplasmic proteins from Pseudomonas aeruginosa

A brief overview of thin sections of cryopreserved walls from select eubacteria will be presented to suggest that all bacteria have functional periplasms, but that these are not necessarily confined to a periplasmic space such as found in typical gram-negative bacteria. Pseudomonas aeruginosa contains many components in its periplasmic space, some of which are required for infection. Throughout its growth cycle, P. aeruginosa blebs-off membrane vesicles that can possess DNA, endotoxin, phospholipase, protease, hemolysin, alkaline phosphatase, and autolysin, each of which must have a molecular phase that resides in the periplasm. These membrane packets make good delivery systems to convey these components to other bacteria and, possibly, tissue. Aminoglycoside antibiotics, such as gentamicin, produce a serious perturbation on the bacterium's surface (separate from the ribosomal effect), which contributes to the killing of the microorganism. Antibiotics such as this increase the size and number of the membrane blebs, which could contribute to septic shock of patients under drug therapy.

Thickness and elasticity of gram-negative murein sacculi measured by atomic force microscopy

Atomic force microscopy was used to measure the thickness of air-dried, collapsed murein sacculi from Escherichia coli K-12 and Pseudomonas aeruginosa PAO1. Air-dried sacculi from E. coli had a thickness of 3.0 nm, whereas those from P. aeruginosa were 1.5 nm thick. When rehydrated, the sacculi of both bacteria swelled to double their anhydrous thickness. Computer simulation of a section of a model single-layer peptidoglycan network in an aqueous solution with a Debye shielding length of 0.3 nm gave a mass distribution full width at half height of 2.4 nm, in essential agreement with these results. When E. coli sacculi were suspended over a narrow groove that had been etched into a silicon surface and the tip of the atomic force microscope used to depress and stretch the peptidoglycan, an elastic modulus of 2.5 x 10(7) N/m(2) was determined for hydrated sacculi; they were perfectly elastic, springing back to their original position when the tip was removed. Dried sacculi were more rigid with a modulus of 3 x 10(8) to 4 x 10(8) N/m(2) and at times could be broken by the atomic force microscope tip. Sacculi aligned over the groove with their long axis at right angles to the channel axis were more deformable than those with their long axis parallel to the groove axis, as would be expected if the peptidoglycan strands in the sacculus were oriented at right angles to the long cell axis of this gram-negative rod. Polar caps were not found to be more rigid structures but collapsed to the same thickness as the cylindrical portions of the sacculi. The elasticity of intact E. coli sacculi is such that, if the peptidoglycan strands are aligned in unison, the interstrand spacing should increase by 12% with every 1 atm increase in (turgor) pressure. Assuming an unstressed hydrated interstrand spacing of 1.3 nm (R. E. Burge, A. G. Fowler, and D. A. Reaveley, J. Mol. Biol. 117:927-953, 1977) and an internal turgor pressure of 3 to 5 atm (or 304 to 507 kPa) (A. L. Koch, Adv. Microbial Physiol. 24:301-366, 1983), the natural interstrand spacing in cells would be 1.6 to 2.0 nm. Clearly, if large macromolecules of a diameter greater than these spacings are secreted through this layer, the local ordering of the peptidoglycan must somehow be disrupted.

Self-assembly product formation of the Bacillus stearothermophilus PV72/p6 S-layer protein SbsA in the course of autolysis of Bacillus subtilis

In order to achieve high level expression and to study the release of a protein capable of self-assembly, the gene encoding the crystalline cell surface (S-layer) protein SbsA of Bacillus stearothermophilus PV72/p6, including its signal sequence, was cloned and expressed in Bacillus subtilis. To obtain high level expression, a tightly regulated, xylose-inducible, stably replicating multicopy-plasmid vector was constructed. After induction of expression, the S-layer protein made up about 15% of the total cellular protein content, which was comparable to the SbsA content of B. stearothermophilus PV72/p6 cells. During all growth stages, SbsA was poorly secreted to the ambient cellular environment by B. subtilis. Extraction of whole cells with guanidine hydrochloride showed that in late stationary growth phase cells 65% of the synthesised SbsA was retained in the peptidoglycan-containing layer, indicating that the rigid cell wall layer was a barrier for efficient SbsA secretion. Electron microscopic investigation revealed that SbsA release from the peptidoglycan-containing layer started in the late stationary growth phase at distinct sites at the cell surface leading to the formation of extracellular self-assembly products which did not adhere to the cell wall surface. In addition, intracellular sheet-like SbsA self-assembly products which followed the curvature of the cell became visible in partly lysed cells. Intracellularly formed self-assembly products remained intact even after complete lysis of the rigid cell envelope layer.

Surface proteins of gram-positive bacteria and mechanisms of their targeting to the cell wall envelope

The cell wall envelope of gram-positive bacteria is a macromolecular, exoskeletal organelle that is assembled and turned over at designated sites. The cell wall also functions as a surface organelle that allows gram-positive pathogens to interact with their environment, in particular the tissues of the infected host. All of these functions require that surface proteins and enzymes be properly targeted to the cell wall envelope. Two basic mechanisms, cell wall sorting and targeting, have been identified. Cell well sorting is the covalent attachment of surface proteins to the peptidoglycan via a C-terminal sorting signal that contains a consensus LPXTG sequence. More than 100 proteins that possess cell wall-sorting signals, including the M proteins of Streptococcus pyogenes, protein A of Staphylococcus aureus, and several internalins of Listeria monocytogenes, have been identified. Cell wall targeting involves the noncovalent attachment of proteins to the cell surface via specialized binding domains. Several of these wall-binding domains appear to interact with secondary wall polymers that are associated with the peptidoglycan, for example teichoic acids and polysaccharides. Proteins that are targeted to the cell surface include muralytic enzymes such as autolysins, lysostaphin, and phage lytic enzymes. Other examples for targeted proteins are the surface S-layer proteins of bacilli and clostridia, as well as virulence factors required for the pathogenesis of L. monocytogenes (internalin B) and Streptococcus pneumoniae (PspA) infections. In this review we describe the mechanisms for both sorting and targeting of proteins to the envelope of gram-positive bacteria and review the functions of known surface proteins.

Control of cell shape and elongation by the rodA gene in Bacillus subtilis

The Escherichia coli rodA and ftsW genes and the spoVE gene of Bacillus subtilis encode membrane proteins that control peptidoglycan synthesis during cellular elongation, division and sporulation respectively. While rodA and ftsW are essential genes in E. coli, the B. subtilis spoVE gene is dispensable for growth and is only required for the synthesis of the spore cortex peptidoglycan. In this work, we report on the characterization of a B. subtilis gene, designated rodA, encoding a homologue of E. coli RodA. We found that the growth of a B. subtilis strain carrying a fusion of rodA to the IPTG-inducible Pspac promoter is inducer dependent. Limiting concentrations of inducer caused the formation of spherical cells, which eventually lysed. An increase in the level of IPTG induced a sphere-to-short rod transition that re-established viability. Higher levels of inducer restored normal cell length. Staining of the septal or polar cap peptidoglycan by a fluorescent lectin was unaffected during growth of the mutant under restrictive conditions. Our results suggest that rodA functions in maintaining the rod shape of the cell and that this function is essential for viability. In addition, RodA has an irreplaceable role in the extension of the lateral walls of the cell. Electron microscopy observations support these conclusions. The ultrastructural analysis further suggests that the growth arrest that accompanies loss of the rod shape is caused by the cell's inability to construct a division septum capable of spanning the enlarged cell. RodA is similar over its entire length to members of a large protein family (SEDS, for shape, elongation, division and sporulation). Members of the SEDS family are probably present in all eubacteria that synthesize peptidoglycan as part of their cell envelope.