A manganese-dependent dioxygenase from Arthrobacter globiformis CM-2 belongs to the major extradiol dioxygenase family

A novel Bacillus ligniniphilus catechol 2,3-dioxygenase shows unique substrate preference and metal requirement

Identification of novel enzymes from lignin degrading microorganisms will help to develop biotechnologies for biomass valorization and aromatic hydrocarbons degradation. Bacillus ligniniphilus L1 grows with alkaline lignin as the single carbon source and is a great candidate for ligninolytic enzyme identification. The first dioxygenase from strain L1 was heterologously expressed, purified, and characterized with an optimal temperature and pH of 32.5 °C and 7.4, respectively. It showed the highest activity with 3-ethylcatechol and significant activities with other substrates in the decreasing order of 3-ethylcatechol > 3-methylcatechol > 3-isopropyl catechol > 2, 3-dihydroxybiphenyl > 4-methylcatechol > catechol. It did not show activities against other tested substrates with similar structures. Most reported catechol 2,3-dioxygenases (C23Os) are Fe2+-dependent whereas Bacillus ligniniphilus catechol 2,3-dioxygenase (BLC23O) is more Mn2+- dependent. At 1 mM, Mn2+ led to 230-fold activity increase and Fe2+ led to 22-fold increase. Sequence comparison and phylogenetic analyses suggested that BL23O is different from other Mn-dependent enzymes and uniquely grouped with an uncharacterized vicinal oxygen chelate (VOC) family protein from Paenibacillus apiaries. Gel filtration analysis showed that BLC23O is a monomer under native condition. This is the first report of a C23O from Bacillus ligniniphilus L1 with unique substrate preference, metal-dependency, and monomeric structure.

O-, N-Atoms-Coordinated Mn Cofactors within a Graphene Framework as Bioinspired Oxygen Reduction Reaction Electrocatalysts

Manganese (Mn) is generally regarded as not being sufficiently active for the oxygen reduction reaction (ORR) compared to other transition metals such as Fe and Co. However, in biology, manganese-containing enzymes can catalyze oxygen-evolving reactions efficiently with a relative low onset potential. Here, atomically dispersed O and N atoms coordinated Mn active sites are incorporated within graphene frameworks to emulate both the structure and function of Mn cofactors in heme-copper oxidases superfamily. Unlike previous single-metal catalysts with general M-N-C structures, here, it is proved that a coordinated O atom can also play a significant role in tuning the intrinsic catalytic activities of transition metals. The biomimetic electrocatalyst exhibits superior performance for the ORR and zinc-air batteries under alkaline conditions, which is even better than that of commercial Pt/C. The excellent performance can be ascribed to the abundant atomically dispersed Mn cofactors in the graphene frameworks, confirmed by various characterization methods. Theoretical calculations reveal that the intrinsic catalytic activity of metal Mn can be significantly improved via changing local geometry of nearest coordinated O and N atoms. Especially, graphene frameworks containing the Mn-N₃ O₁ cofactor demonstrate the fastest ORR kinetics due to the tuning of the d electronic states to a reasonable state.

Biotransformation of quercetin by Gliocladium deliquescens NRRL 1086

With an attempt to synthesize high-value isoquercitrin (quercetin-3-O-β-D-glucopyranoside), we carried out the biotransformation of quercetin (1) by Gliocladium deliquescens NRRL 1086. Along with the aimed product quercetin 3-O-β-D-glycoside (2), three additional metabolites, 2-protocatechuoyl-phlorogucinol carboxylic acid (3), 2,4,6-trihydroxybenzoic acid (4), and protocatechuic acid (5), were also isolated. The time-course experiments revealed that there were two metabolic routes, regio-selectivity glycosylation and quercetin 2,3-dioxygenation, co-existing in the culture. Both glycosylation and oxidative cleavage rapidly took place after quercetin feeding; about 98% quercetin were consumed within the initial 8 h and the oxdized product (2-protocatechuoyl-phlorogucinol carboxylic acid) was hydrolyzed into two phenolic compounds (2,4,6-trihydroxybenzoic acid and protocatechuic acid). We also investigated the impact of glucose content and metal ions on the two reactions and found that high concentrations of glucose significantly inhibited the oxidative cleavage and improved the yield of isoquercitrin and that Ca²⁺, Fe²⁺, Mn²⁺, Mg²⁺, and Zn²⁺ inhibited glycosylation. To test the promiscuity of this culture, we selected other four flavonols as substrates; the results demonstrated its high regio-selectivity glycosylation ability towards flavonols at C-3 hydroxyl. In conclusion, our findings indicated that the versatile microbe of G. deliquescens NRRL 1086 maitained abundant enzymes, deserving further research.

3,4-Dihydroxyphenylacetate 2,3-dioxygenase from Pseudomonas aeruginosa: An Fe(II)-containing enzyme with fast turnover

3,4-dihydroxyphenylacetate (DHPA) dioxygenase (DHPAO) from Pseudomonas aeruginosa (PaDHPAO) was overexpressed in Escherichia coli and purified to homogeneity. As the enzyme lost activity over time, a protocol to reactivate and conserve PaDHPAO activity has been developed. Addition of Fe(II), DTT and ascorbic acid or ROS scavenging enzymes (catalase or superoxide dismutase) was required to preserve enzyme stability. Metal content and activity analyses indicated that PaDHPAO uses Fe(II) as a metal cofactor. NMR analysis of the reaction product indicated that PaDHPAO catalyzes the 2,3-extradiol ring-cleavage of DHPA to form 5-carboxymethyl-2-hydroxymuconate semialdehyde (CHMS) which has a molar absorptivity of 32.23 mM^-1cm^-1 at 380 nm and pH 7.5. Steady-state kinetics under air-saturated conditions at 25°C and pH 7.5 showed a K_m for DHPA of 58 ± 8 μM and a k_cat of 64 s^-1, indicating that the turnover of PaDHPAO is relatively fast compared to other DHPAOs. The pH-rate profile of the PaDHPAO reaction shows a bell-shaped plot that exhibits a maximum activity at pH 7.5 with two pK_a values of 6.5 ± 0.1 and 8.9 ± 0.1. Study of the effect of temperature on PaDHPAO activity indicated that the enzyme activity increases as temperature increases up to 55°C. The Arrhenius plot of ln(k’_cat) versus the reciprocal of the absolute temperature shows two correlations with a transition temperature at 35°C. Two activation energy values (E_a) above and below the transition temperature were calculated as 42 and 14 kJ/mol, respectively. The data imply that the rate determining steps of the PaDHPAO reaction at temperatures above and below 35°C may be different. Sequence similarity network analysis indicated that PaDHPAO belongs to the enzyme clusters that are largely unexplored. As PaDHPAO has a high turnover number compared to most of the enzymes previously reported, understanding its biochemical and biophysical properties should be useful for future applications in biotechnology.

Characterisation of the phenanthrene degradation-related genes and degrading ability of a newly isolated copper-tolerant bacterium

A copper-tolerant phenanthrene (PHE)-degrading bacterium, strain Sphingobium sp. PHE-1, was newly isolated from the activated sludge in a wastewater treatment plant. Two key genes, ahdA1b-1 encoding polycyclic aromatic hydrocarbon ring-hydroxylating dioxygenase (PAH-RHDɑ) and xyLE encoding catechol-2,3-dioxygenase (C23O), involved in the PHE metabolism by strain PHE-1 were identified. The PAH-RHD gene cluster showed 96% identity with the same cluster of Sphingomonas sp. P2. Our results indicated the induced transcription of xylE and ahdA1b-1 genes by PHE, simultaneously promoted by Cu(II). For the first time, high concentration of Cu(II) is found to encourage the expression of PAH-RHDɑ and C23O genes during PHE degradation. Applying Sphingomonas PHE-1 in PHE-contaminated soils for bioaugmentation, the abundance of xylE gene was increased by the planting of ryegrass and the presence of Cu(II), which, in turn, benefited ryegrass growth. The best performance of PHE degradation and the highest abundance of xylE genes occurred in PHE-copper co-contaminated soils planted with ryegrass.

NO binding to Mn-substituted homoprotocatechuate 2,3-dioxygenase: relationship to O₂ reactivity

Iron(II)-containing homoprotocatechuate 2,3-dioxygenase (FeHPCD) activates O2 to catalyze the aromatic ring opening of homoprotocatechuate (HPCA). The enzyme requires Fe(II) for catalysis, but Mn(II) can be substituted (MnHPCD) with essentially no change in the steady-state kinetic parameters. Near simultaneous O2 and HPCA activation has been proposed to occur through transfer of an electron or electrons from HPCA to O2 through the divalent metal. In O2 reactions with MnHPCD-HPCA and the 4-nitrocatechol (4NC) complex of the His200Asn (H200N) variant of FeHPCD, this transfer has resulted in the detection of a transient M(III)-O2 (·-) species that is not observed during turnover of the wild-type FeHPCD. The factors governing formation of the M(III)-O2 (·-) species are explored here by EPR spectroscopy using MnHPCD and nitric oxide (NO) as an O2 surrogate. Both the HPCA and the dihydroxymandelic substrate complexes of MnHPCD bind NO, thus representing the first reported stable MnNO complexes of a nonheme enzyme. In contrast, the free enzyme, the MnHPCD-4NC complex, and the MnH200N and MnH200Q variants with or without HPCA bound do not bind NO. The MnHPCD-ligand complexes that bind NO are also active in normal O2-linked turnover, whereas the others are inactive. Past studies have shown that FeHPCD and the analogous variants and catecholic ligand complexes all bind NO, and are active in normal turnover. This contrasting behavior may stem from the ability of the enzyme to maintain the approximately 0.8-V difference in the solution redox potentials of Fe(II) and Mn(II). Owing to the higher potential of Mn, the formation of the NO adduct or the O2 adduct requires both strong charge donation from the bound catecholic ligand and additional stabilization by interaction with the active-site His200. The same nonoptimal electronic and structural forces that prevent NO and O2 binding in MnHPCD variants may lead to inefficient electron transfer from the catecholic substrate to the metal center in variants of FeHPCD during O2-linked turnover. Accordingly, past studies have shown that intermediate Fe(III) species are observed for these mutant enzymes.

Manganese(II) semiquinonato and manganese(III) catecholato complexes with tridentate ligand: modeling the substrate-binding state of manganese-dependent catechol dioxygenase and reactivity with molecular oxygen

Catecholate catwalk: Monomeric manganese(III) catecholato and manganese(II) semiquinonato complexes as the substrate-binding model of catechol dioxygenase have been synthesized and structurally characterized. The semiquinonato complex reacted with molecular oxygen to give ring-cleaved products and benzoquinone in the catalytic condition.

Metallation and mismetallation of iron and manganese proteins in vitro and in vivo: the class I ribonucleotide reductases as a case study

How cells ensure correct metallation of a given protein and whether a degree of promiscuity in metal binding has evolved are largely unanswered questions. In a classic case, iron- and manganese-dependent superoxide dismutases (SODs) catalyze the disproportionation of superoxide using highly similar protein scaffolds and nearly identical active sites. However, most of these enzymes are active with only one metal, although both metals can bind in vitro and in vivo. Iron(ii) and manganese(ii) bind weakly to most proteins and possess similar coordination preferences. Their distinct redox properties suggest that they are unlikely to be interchangeable in biological systems except when they function in Lewis acid catalytic roles, yet recent work suggests this is not always the case. This review summarizes the diversity of ways in which iron and manganese are substituted in similar or identical protein frameworks. As models, we discuss (1) enzymes, such as epimerases, thought to use Fe(II) as a Lewis acid under normal growth conditions but which switch to Mn(II) under oxidative stress; (2) extradiol dioxygenases, which have been found to use both Fe(II) and Mn(II), the redox role of which in catalysis remains to be elucidated; (3) SODs, which use redox chemistry and are generally metal-specific; and (4) the class I ribonucleotide reductases (RNRs), which have evolved unique biosynthetic pathways to control metallation. The primary focus is the class Ib RNRs, which can catalyze formation of a stable radical on a tyrosine residue in their β2 subunits using either a di-iron or a recently characterized dimanganese cofactor. The physiological roles of enzymes that can switch between iron and manganese cofactors are discussed, as are insights obtained from the studies of many groups regarding iron and manganese homeostasis and the divergent and convergent strategies organisms use for control of protein metallation. We propose that, in many of the systems discussed, "discrimination" between metals is not performed by the protein itself, but it is instead determined by the environment in which the protein is expressed.

Oxy intermediates of homoprotocatechuate 2,3-dioxygenase: facile electron transfer between substrates

Substrates homoprotocatechuate (HPCA) and O(2) bind to the Fe(II) of homoprotocatechuate 2,3-dioxygenase (FeHPCD) in adjacent coordination sites. Transfer of an electron(s) from HPCA to O(2) via the iron is proposed to activate the substrates for reaction with each other to initiate aromatic ring cleavage. Here, rapid-freeze-quench methods are used to trap and spectroscopically characterize intermediates in the reactions of the HPCA complexes of FeHPCD and the variant His200Asn (FeHPCD−HPCA and H200N−HPCA, respectively) with O(2). A blue intermediate forms within 20 ms of mixing of O(2) with H200N−HPCA (H200N(Int1)(HPCA)). Parallel mode electron paramagnetic resonance and Mössbauer spectroscopies show that this intermediate contains high-spin Fe(III) (S = 5/2) antiferromagnetically coupled to a radical (S(R) = 1/2) to yield an S = 2 state. Together, optical and Mössbauer spectra of the intermediate support assignment of the radical as an HPCA semiquinone, implying that oxygen is bound as a (hydro)peroxo ligand. H200N(Int1)(HPCA) decays over the next 2 s, possibly through an Fe(II) intermediate (H200N(Int2)(HPCA)), to yield the product and the resting Fe(II) enzyme. Reaction of FeHPCD−HPCA with O(2) results in rapid formation of a colorless Fe(II) intermediate (FeHPCD(Int1)(HPCA)). This species decays within 1 s to yield the product and the resting enzyme. The absence of a chromophore from a semiquinone or evidence of a spin-coupled species in FeHPCD(Int1)(HPCA) suggests it is an intermediate occurring after O(2) activation and attack. The similar Mössbauer parameters for FeHPCD(Int1)(HPCA) and H200N(Int2)(HPCA) suggest these are similar intermediates. The results show that transfer of an electron from the substrate to the O(2) via the iron does occur, leading to aromatic ring cleavage.

In vivo self-hydroxylation of an iron-substituted manganese-dependent extradiol cleaving catechol dioxygenase

The homoprotocatechuate 2,3-dioxygenase from Arthrobacter globiformis (MndD) catalyzes the oxidative ring cleavage reaction of its catechol substrate in an extradiol fashion. Although this reactivity is more typically associated with non-heme iron enzymes, MndD exhibits an unusual specificity for manganese(II). MndD is structurally very similar to the iron(II)-dependent homoprotocatechuate 2,3-dioxygenase from Brevibacterium fuscum (HPCD), and we have previously shown that both MndD and HPCD are equally active towards substrate turnover with either iron(II) or manganese(II) (Emerson et al. in Proc. Natl. Acad. Sci. USA 105:7347-7352, 2008). However, expression of MndD in Escherichia coli under aerobic conditions in the presence of excess iron results in the isolation of inactive blue-green iron-substituted MndD. Spectroscopic studies indicate that this form of iron-substituted MndD contains an iron(III) center with a bound catecholate, which is presumably generated by in vivo self-hydroxylation of a second-sphere tyrosine residue, as found for other self-hydroxylated non-heme iron oxygenases. The absence of this modification in either the native manganese-containing MndD or iron-containing HPCD suggests that the metal center of iron-substituted MndD is able to bind and activate O(2) in the absence of its substrate, employing a high-valence oxoiron oxidant to carry out the observed self-hydroxylation chemistry. These results demonstrate that the active site metal in MndD can support two dramatically different O(2) activation pathways, further highlighting the catalytic flexibility of enzymes containing a 2-His-1-carboxylate facial triad metal binding motif.

Theoretical and experimental investigation of the semiquinone forms of protocatechuic acid. The effect of manganese

Ten oxidized, oxygenated and dimeric forms of protocatechuic acid (PCA, 3,4-dihydroxybenzoic acid, 3,4-DHBA) have been studied using DFT calculations (at the B3LYP/TZVP level of theory) and their structural and spectroscopic parameters (electronic transitions, NMR resonances) have been calculated. Combination with experimental results (under anaerobic or aerobic environment) determines the conditions for the existence of protonated, fully deprotonate and/or oxygenated semiquinones of PCA. Several energy optimized conformers containing manganese-(PCA-semiquinones) and water or/and peroxo-groups have been drawn (species 11-16) and their structural and spectroscopic properties have been calculated at the same level of theory. Experimental parallel to the theoretical results provide evidence for the existence of Mn(II)- and Mn(III)-[PCA-semiquinone] as well the conditions of dioxygen activation. Two of the blue solids (17 and 18) isolated from these solutions, have been characterized. Elemental analyzes, TGA, IR and ESR spectra support the formulation Mn(2)(PCA)(2)(O(2))(OH)(2)(AcO)(ClO(4))(2)(H(2)O)(3) (17), and Mn(2)(PCA)(2)(O(2))(2)(OH)(2)(AcO)H(2)O (18). Their ESR spectra, in solution (blue solutions), are almost identical and indicative of Mn(IV) existence. From the whole investigation, the activation of dioxygen by the PCA, its relocation on manganese and the oxidation of the metal ion have been provided.

Crystallization and preliminary crystallographic analysis of manganese(II)-dependent 2,3-dihydroxybiphenyl 1,2-dioxygenase from Bacillus sp. JF8

A thermostable manganese(II)-dependent 2,3-dihydroxybiphenyl-1,2-dioxygenase derived from Bacillus sp. JF8 was crystallized. The initial screening for crystallization was performed by the sitting-drop vapour-diffusion method using a crystallization robot, resulting in the growth of two crystal forms. The first crystal belonged to space group P1, with unit-cell parameters a = 62.7, b = 71.4, c = 93.6 A, alpha = 71.2, beta = 81.0, gamma = 64.0 degrees, and diffracted to 1.3 A resolution. The second crystal belonged to space group I222, with unit-cell parameters a = 74.2, b = 90.8, c = 104.3 A, and diffracted to 1.3 A resolution. Molecular-replacement trials using homoprotocatechuate 2,3-dioxygenase from Arthrobacter globiformis (28% amino-acid sequence identity) as a search model provided a satisfactory solution for both crystal forms.

Molecular structure and catechol oxidase activity of a new copper(I) complex with sterically crowded monodentate N-donor ligand

The attempted alkylation of 1,3-bis(2'-pyridylimino)isoindoline (indH) by the use of n-BuLi and subsequent alkyl halides led to quaternization of the pyridine nitrogens and the zwitterionic monodentate N-ligand (Me(2)ind)I was formed. By the use of the ligand the copper(I) complex [Cu(I)(Me(2)ind)I(2)] was prepared and its structure determined. It was found to be good catalyst for the oxidation of 3,5-di-tert-butylcatechol (DTBCH(2)) to 3,5-di-tert-butyl-1,2-benzoquinone (DTBQ) and H(2)O(2) by dioxygen. Detailed kinetic studies revealed first-order dependence on the catalyst and dioxygen concentration and saturation type behavior with respect to the substrate.

Crystal structure and mutagenic analysis of GDOsp, a gentisate 1,2-dioxygenase from Silicibacter pomeroyi

Dioxygenases catalyze dioxygen incorporation into various organic compounds and play a key role in the complex degradation pathway of mono- and polycyclic aromatic and hetero-aromatic compounds. Here we report the crystal structure of gentisate 1,2-dioxygenase from Silicibacter pomeroyi (GDOsp) at a 2.8 A resolution. The enzyme possessed a conserved three-dimensional structure of the bicupin family, forming a homotetramerization. However, each subunit of GDOsp unusually contained two ferrous centers that were located in its two homologous cupin domains, respectively. Further mutagenic analysis indicated that the enzyme activity of GDOsp depends on the microenvironment in both metal-binding sites. Moreover, homologous structural comparison and functional study on GDOsp variants unveiled a group of functionally essential residues and suggested that the active site of the enzyme is located in the amino-terminal domain, but could be influenced by changes in the carboxyl domain. Therefore, GDOsp may provide a working model for studying long-distance communication within a protein (or its complex).

Hydroquinone dioxygenase from pseudomonas fluorescens ACB: a novel member of the family of nonheme-iron(II)-dependent dioxygenases

Hydroquinone 1,2-dioxygenase (HQDO), an enzyme involved in the catabolism of 4-hydroxyacetophenone in Pseudomonas fluorescens ACB, was purified to apparent homogeneity. Ligandation with 4-hydroxybenzoate prevented the enzyme from irreversible inactivation. HQDO was activated by iron(II) ions and catalyzed the ring fission of a wide range of hydroquinones to the corresponding 4-hydroxymuconic semialdehydes. HQDO was inactivated by 2,2'-dipyridyl, o-phenanthroline, and hydrogen peroxide and inhibited by phenolic compounds. The inhibition with 4-hydroxybenzoate (K(i) = 14 microM) was competitive with hydroquinone. Online size-exclusion chromatography-mass spectrometry revealed that HQDO is an alpha2beta2 heterotetramer of 112.4 kDa, which is composed of an alpha-subunit of 17.8 kDa and a beta-subunit of 38.3 kDa. Each beta-subunit binds one molecule of 4-hydroxybenzoate and one iron(II) ion. N-terminal sequencing and peptide mapping and sequencing based on matrix-assisted laser desorption ionization--two-stage time of flight analysis established that the HQDO subunits are encoded by neighboring open reading frames (hapC and hapD) of a gene cluster, implicated to be involved in 4-hydroxyacetophenone degradation. HQDO is a novel member of the family of nonheme-iron(II)-dependent dioxygenases. The enzyme shows insignificant sequence identity with known dioxygenases.

Swapping metals in Fe- and Mn-dependent dioxygenases: evidence for oxygen activation without a change in metal redox state

Biological O(2) activation often occurs after binding to a reduced metal [e.g., M(II)] in an enzyme active site. Subsequent M(II)-to-O(2) electron transfer results in a reactive M(III)-superoxo species. For the extradiol aromatic ring-cleaving dioxygenases, we have proposed a different model where an electron is transferred from substrate to O(2) via the M(II) center to which they are both bound, thereby obviating the need for an integral change in metal redox state. This model is tested by using homoprotocatechuate 2,3-dioxygenases from Brevibacterium fuscum (Fe-HPCD) and Arthrobacter globiformis (Mn-MndD) that share high sequence identity and very similar structures. Despite these similarities, Fe-HPCD binds Fe(II) whereas Mn-MndD incorporates Mn(II). Methods are described to incorporate the nonphysiological metal into each enzyme (Mn-HPCD and Fe-MndD). The x-ray crystal structure of Mn-HPCD at 1.7 A is found to be indistinguishable from that of Fe-HPCD, while EPR studies show that the Mn(II) sites of Mn-MndD and Mn-HPCD, and the Fe(II) sites of the NO complexes of Fe-HPCD and Fe-MndD, are very similar. The uniform metal site structures of these enzymes suggest that extradiol dioxygenases cannot differentially compensate for the 0.7-V gap in the redox potentials of free iron and manganese. Nonetheless, all four enzymes exhibit nearly the same K(M) and V(max) values. These enzymes constitute an unusual pair of metallo-oxygenases that remain fully active after a metal swap, implicating a different way by which metals are used to promote oxygen activation without an integral change in metal redox state.

Biochemical and molecular characterization of a quercetinase from Penicillium olsonii

Quercetinase (quercetin 2,3-dioxygenase, EC 1.13.11.24) is produced by various filamentous fungi when grown on rutin as the sole carbon and energy source. From a rutin based liquid culture of Penicillium olsonii, we purified a quercetinase with a specific activity of 175U mg(-1). The enzyme is a monomeric glycoprotein of approximately 55 kDa, containing 0.9+/-0.1 copper atoms per protein. Its substrate specificity is restricted to the flavonol family of flavonoids. It is completely inhibited by diethyldithiocarbamate at a concentration of 100 nM and 1H-2-benzyl-3-hydroxy-4-oxoquinolin is a competitive inhibitor with a K(I) of 4 microM. The cDNA poquer1 was cloned and sequenced. It encodes a 365 amino acids long enzyme with a strong sequence identity with the Aspergillus japonicus quercetinase (Q7SIC2). Like the enzyme from A. japonicus, only one of the two cupin domains of the Penicillium olsonii quercetinase is able to bind a metal atom.

New functional model complexes of intradiol-cleaving catechol dioxygenases: properties and reactivity of CuII(L)(O2Ncat)

Complexes Cu(O2Ncat)(tbeda) (1) and Cu(O2Ncat)(tmeda) (2) (tbeda = N,N,N',N'-tetrabenzylethylenediamine, tmeda=N,N,N',N'-tetramethylethylenenediamine, O2NcatH2=4-nitrocatechol) have been prepared by the reaction of copper(II) perchlorate with 4-nitrocatechol in the presence of triethylamine and the appropriate bidentate ligand. These compounds represent structural and functional model systems for the copper-containing catechol 1,2-dioxygenase. Both complexes have been structurally characterized by X-ray crystallography and by UV-vis, IR, and EPR spectroscopies. Upon protonation of 1 and 2 with perchloric acid, the bidentate coordination of O2Ncat could be reversible converted to the monodentate coordination of O2NcatH. The equilibrium constants were found to be 4200 and 3500, respectively, by measuring the UV-vis spectra in DMF. Back-titration with morpholine proved the reversibility of both reactions. Kinetic data on the oxygenation of 1 and 2 revealed overall second-order rate equations with kinetic parameters: ktbeda=(4.63+/-0.23)x10(-2) mol-1 dm3 s-1, DeltaH=51+/-6 kJ mol-1, DeltaS=-137+/-16 J mol-1 K-1; ktmeda=(0.89+/-0.23) mol-1 dm3 s-1, DeltaH=85+/-7 kJ mol-1, DeltaS=-57+/-19 J mol-1 K-1 at 365.16 K. Oxygenation of 1, 2, and [Cu(O2NcatH)(L)]ClO4 (L=tbeda, tmeda) in DMF solution at ambient conditions gives the corresponding intradiol ring-cleaved (2-nitro-muconato)copper(II) complexes. These data support the assumption that the reaction of the differently coordinated catecholate ligand with dioxygen shows only 1,2-dioxygenase activity.

Spectroscopic and electronic structure study of the enzyme-substrate complex of intradiol dioxygenases: substrate activation by a high-spin ferric non-heme iron site

Various mechanisms have been proposed for the initial O(2) attack in intradiol dioxygenases based on different electronic descriptions of the enzyme-substrate (ES) complex. We have examined the geometric and electronic structure of the high-spin ferric ES complex of protocatechuate 3,4-dioxygenase (3,4-PCD) with UV/visible absorption, circular dichroism (CD), magnetic CD (MCD), and variable-temperature variable-field (VTVH) MCD spectroscopies. The experimental data were coupled with DFT and INDO/S-CI calculations, and an experimentally calibrated bonding description was obtained. The broad absorption spectrum for the ES complex in the 6000-31000 cm(-1) region was resolved into at least five individual transitions, assigned as ligand-to-metal charge transfer (LMCT) from the protocatechuate (PCA) substrate and Tyr408. From our DFT calculations, all five LMCT transitions originate from the PCA and Tyr piop orbitals to the ferric dpi orbitals. The strong pi covalent donor interactions dominate the bonding in the ES complex. Using hypothetical Ga(3+)-catecholate/semiquinone complexes as references, 3,4-PCD-PCA was found to be best described as a highly covalent Fe(3+)-catecholate complex. The covalency is distributed unevenly among the four PCA valence orbitals, with the strongest interaction between the piop-sym and Fe dxz orbitals. This strong pi interaction, as reflected in the lowest energy PCA-to-Fe(3+) LMCT transition, is responsible for substrate activation for the O(2) reaction of intradiol dioxygenases. This involves a multi-electron-transfer (one beta and two alpha) mechanism, with Fe3+ acting as a buffer for the spin-forbidden two-electron redox process between PCA and O(2) in the formation of the peroxy-bridged ESO2 intermediate. The Fe ligand field overcomes the spin-forbidden nature of the triplet O(2) reaction, which potentially results in an intermediate spin state (S = 3/2) on the Fe(3+) center which is stabilized by a change in coordination along the reaction coordinate.

Theoretical study of the catalytic reaction mechanism of MndD

Manganese-dependent homoprotocatechuate 2,3-dioxygenase (MndD) is an enzyme taking part in the catabolism of aromatic compounds in the environment. It uses molecular oxygen to perform an extradiol cleavage of the ring of the ortho-dihydroxylated aromatic compound homoprotocatechuate. A theoretical investigation of the reaction path for MndD was performed using hybrid density functional theory with the B3LYP functional, and a catalytic mechanism has been suggested. Models of different size were built from the crystal structure of the enzyme and were used in the search for intermediates and transition states. It was found that the substrate first binds at the active site as a monoanion. Next the dioxygen is bound, forming a hydroperoxo intermediate. The O-O bond, activated in this way undergoes homolytic cleavage leading to an oxyl and then to an extra epoxide radical with subsequent opening of the aromatic ring. The lactone ring is then hydrolyzed by the Mn-bound OH group, and the final product is obtained in the last reaction steps. Alternative reaction paths were considered, and their calculated barriers were found to be higher than for the suggested mechanism. The selectivity between the extra- and intra-cleavage pathways was found to be determined by the barriers for the decay of the radical state.

bph genes of the thermophilic PCB degrader, Bacillus sp. JF8: characterization of the divergent ring-hydroxylating dioxygenase and hydrolase genes upstream of the Mn-dependent BphC

Bacillussp. JF8 is a thermophilic polychlorinated biphenyl (PCB) degrader, which utilizes biphenyl and naphthalene. A thermostable, Mn-dependent 2,3-dihydroxybiphenyl 1,2-dioxygenase, BphC_JF8, has been characterized previously. Upstream ofbphCare five ORFs exhibiting low homology with, and a different gene order from, previously characterizedbphgenes. From the 5′ to 3′ direction the genes are: a putative regulatory gene (bphR), a hydrolase (bphD), the large and small subunits of a ring-hydroxylating dioxygenase(bphA1A2), and acis-diol dehydrogenase (bphB). Hybridization studies indicate that the genes are located on a plasmid. Ring-hydroxylating activity of recombinant BphA1A2_JF8 towards biphenyl, PCB, naphthalene and benzene was observed inEscherichia colicells, with complementation of non-specific ferredoxin and ferredoxin reductase by host cell proteins. PCB degradation by recombinant BphA1A2_JF8 showed that the congener specificity of the recombinant enzyme was similar toBacillussp. JF8. BphD_JF8, with an optimum temperature of 85 °C, exhibited a narrow substrate preference for 2-hydroxy-6-oxo-6-phenylhexa-2,4-dienoic acid. The Arrhenius plot of BphD_JF8 was biphasic, with two characteristic energies of activation and a break point at 47 °C.

The role of histidine 200 in MndD, the Mn(II)-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase from Arthrobacter globiformis CM-2, a site-directed mutagenesis study

The manganese-dependent 3,4-dihydroxyphenylacetate 2,3-dioxygenase (MndD) from Arthrobacter globiformis CM-2 is an extradiol-cleaving catechol dioxygenase that catalyzes aromatic ring cleavage of 3,4-dihydroxyphenylacetate (DHPA). Based on the recent crystal structure of the MndD-DHPA complex, a series of site-directed mutations were made at a conserved second-sphere residue, histidine 200, to gain insight into and clarify the role this residue plays in the Mn(II)-dependent catalytic mechanism. In this study, we report the activities and spectroscopic data of these H200 variants and their DHPA and 4-nitrocatechol (4-NC) complexes. The data collected from wild-type and mutant MndDs are consistent with a role for H200 interacting with a manganese-bound dioxygen moiety and are inconsistent with other previously proposed roles involving proton transfer. Spectroscopic observations, including unique low-field EPR signals found when DHPA and 4-NC are bound to the Mn(II) center of MndD, are discussed and their relationship to dioxygen activation catalyzed in MndD is explored.

Characterization of methylhydroquinone-metabolizing oxygenase genes encoded on plasmid in Burkholderia sp. NF100

Methylhydroquinone is an intermediate in the degradation of fenitrothion by Burkholderia sp. NF100. The catabolic gene (mhq) for methylhydroquinone degradation encoded on the plasmid pNF1 in the strain was cloned and sequenced. The mhq clone contained two ORFs, mhqA and mhqB, of which the deduced amino acid sequence shared significant homology with NAD(P)H-dependent flavoprotein monooxygenases and extradiol dioxygenases, respectively. Parts of the consensus sequences of the monooxygenase gene and dioxygenase gene have been identified in MhqA and MhqB from strain NF100, respectively. MhqA was overexpressed in Escherichia coli, and partially purified MhqA catalyzed the NADPH-dependent hydroxylation of methylhydroquinone. MhqB was also overexpressed in E. coli, and the purified enzyme showed an extradiol ring cleavage activity toward 3-methylcatechol but a very low activity was observed toward 4-methylcatechol.

The Role of the Conserved Residues His-246, His-199, and Tyr-255 in the Catalysis of Catechol 2,3-Dioxygenase from Pseudomonas stutzeri OX1

Catechol 2,3-dioxygenase (C2,3O) from Pseudomonas stutzeri OX1, which is able to grow on various aromatic substrates as the sole source of carbon and energy, has been expressed in Escherichia coli, purified, characterized, and found to be very similar to other dioxygenases from Pseudomonas species. Interestingly, the activity of the protein shows a rather unusual pH dependence when assayed on catechol. A model of the catalytic mechanism was developed that is able to reproduce the catalytic behavior of the protein as a function of the pH. The model includes multiple equilibria and four productive intermediates with different ionization states of the enzyme-substrate complex. The fitting of the theoretical curve to the experimental data suggests that a tyrosine and two histidine residues are involved in catalysis. Mutants (H246N)-, (H246A)-, (H199N)- and (Y255F)-C2,3O were produced to investigate the role of highly conserved His-199, His-246, and Tyr-255. The strongly reduced activity of the mutants suggests a primary catalytic role for each of these residues. Moreover, mutants at positions 199 and 246 display pH profiles different from that of the wild-type protein, thus indicating that residues His-246 and His-199 play a role in determining the unusual pH dependence of the enzyme. In addition, electron-withdrawing groups on catechol, which increase the acidity of the phenolic hydroxyl group, are able to counterbalance the effect of the mutation H246N in reducing catalytic activity but cause a further reduction of the activity of (H199N)-C2,3O. This finding suggests that His-246 is involved in the initial catechol deprotonation, whereas His-199 promotes the reaction between oxygen and the aromatic ring.

Hybrid DFT Study of the Mechanism of Quercetin 2,3-Dioxygenase

The mechanism of the copper-containing enzyme quercetin 2,3-dioxygenase has been studied using hybrid density functional theory. This enzyme cleaves the O-heterocycle of a flavonol using dioxygen and releases carbon monoxide. Two different pathways for the dioxygen attack on the copper complex have been investigated, and the one where the first attack is on copper is found to be the energetically preferred one. By using this pathway the problem of having to go through a spin-orbit-induced spin crossing is also avoided. The adduct has three unpaired spins and is ideally suited for forming a dioxygen bridging structure, which occurs in the next step. Rather than cleaving the O-O bond in the next step, another C-O bond between dioxygen and the substrate is first formed. Finally, the O-O bond is cleaved, and CO is released in one concerted transition state with a very low barrier. The results are in good agreement with experimental findings. The mechanism is compared to the ones for other similar enzymes studied recently by similar methods.

Evidence for a new metal in a known active site: purification and characterization of an iron-containing quercetin 2,3-dioxygenase from Bacillus subtilis

The protein YxaG from Bacillus subtilis, of previously unknown function, was found to have quercetin 2,3-dioxygenase activity when overexpressed in Escherichia coli. The enzyme converts the flavonol quercetin to 2-protocatechuoylphloroglucinol carboxylic acid and carbon monoxide, indicating that it performs the same reaction and yields the same products as the well-characterized copper-containing quercetin 2,3-dioxygenase from Aspergillus. In contrast to the Aspergillus protein, YxaG contains iron, and the enzyme is sensitive to strong Fe(II) chelators, similar to the extensively studied catechol dioxygenases. The active site metal was probed by EPR spectroscopy using the label nitric oxide to confirm the presence of an Fe(II) atom. The kinetic parameters and pH activity profiles are also markedly different from those of the copper-containing quercetin 2,3-dioxygenases from Aspergillus. YxaG represents the first example of a prokaryotic quercetin 2,3-dioxygenase.

Genes for Mn(II)-dependent NahC and Fe(II)-dependent NahH located in close proximity in the thermophilic naphthalene and PCB degrader, Bacillus sp. JF8: cloning and characterization

A 10 kb DNA fragment was isolated using a DNA probe derived from the N-terminal amino acid sequence of the extradiol dioxygenase purified from naphthalene-grownBacillussp. JF8, a thermophilic naphthalene and polychlorinated biphenyl degrader. The cloned DNA fragment had six open reading frames, designatednahHLOMmocBnahCbased on sequence homology, of which the products NahH_JF8 and NahC_JF8 were extradiol dioxygenases. Although NahC_JF8 and NahH_JF8 exhibit low homology to known extradiol dioxygenases, the active-site residues and metal ion ligands are conserved. The presence of Mn(II) in culture medium was found to be essential for production of active recombinant NahC_JF8, while Fe(II) was necessary for active recombinant NahH_JF8. Inductively coupled plasma mass spectrometry analysis of active NahC_JF8 identified the cofactor to be manganese, indicating a Mn(II)-dependent extradiol dioxygenase. NahC_JF8 exhibitedKmvalues of 32±5 μM for 1,2-dihydroxynaphthalene and 510±90 μM for 2,3-dihydroxybiphenyl at 60 °C. In cell-free extracts, NahH_JF8 exhibited a broad substrate range for 2,3-dihydroxybiphenyl, catechol, and 3- and 4-methylcatechol at 25 °C. Stability studies on the Mn(II)-dependent NahC_JF8 indicated that it was thermostable, retaining 50 % activity after incubation at 80 °C for 20 min, and it exhibited resistance to EDTA and H2O2. Northern hybridization studies clarified that both NahC_JF8 and NahH_JF8 were induced by naphthalene; RT-PCR showed thatnahHLOMmocBnahCis expressed as a single transcript.

Crystallographic comparison of manganese- and iron-dependent homoprotocatechuate 2,3-dioxygenases

The X-ray crystal structures of homoprotocatechuate 2,3-dioxygenases isolated from Arthrobacter globiformis and Brevibacterium fuscum have been determined to high resolution. These enzymes exhibit 83% sequence identity, yet their activities depend on different transition metals, Mn2+ and Fe2+, respectively. The structures allow the origins of metal ion selectivity and aspects of the molecular mechanism to be examined in detail. The homotetrameric enzymes belong to the type I family of extradiol dioxygenases (vicinal oxygen chelate superfamily); each monomer has four betaalphabetabetabeta modules forming two structurally homologous N-terminal and C-terminal barrel-shaped domains. The active-site metal is located in the C-terminal barrel and is ligated by two equatorial ligands, H214NE1 and E267OE1; one axial ligand, H155NE1; and two to three water molecules. The first and second coordination spheres of these enzymes are virtually identical (root mean square difference over all atoms, 0.19 A), suggesting that the metal selectivity must be due to changes at a significant distance from the metal and/or changes that occur during folding. The substrate (2,3-dihydroxyphenylacetate [HPCA]) chelates the metal asymmetrically at sites trans to the two imidazole ligands and interacts with a unique, mobile C-terminal loop. The loop closes over the bound substrate, presumably to seal the active site as the oxygen activation process commences. An "open" coordination site trans to E267 is the likely binding site for O2. The geometry of the enzyme-substrate complexes suggests that if a transiently formed metal-superoxide complex attacks the substrate without dissociation from the metal, it must do so at the C-3 position. Second-sphere active-site residues that are positioned to interact with the HPCA and/or bound O2 during catalysis are identified and discussed in the context of current mechanistic hypotheses.

Catalytic Oxidation of 3,5-Di-tert-butylcatechol by a Series of Mononuclear Manganese Complexes: Synthesis, Structure, and Kinetic Investigation

The manganese compounds [Mn(bpia)(OAc)(OCH(3))](PF(6)) (1), [Mn(bipa)(OAc)(OCH(3))](PF(6)) (2), [Mn(bpia)(Cl)(2)](ClO(4)) (3), [Mn(bipa)(Cl)(2)](ClO(4)) (4), [Mn(Hmimppa)(Cl)(2)] x CH(3)OH (5), and [Mn(mimppa)(TCC)] x 2CHCl(3) (6) (bpia = bis(picolyl)(N-methylimidazole-2-yl)amine; bipa = bis(N-methylimidazole-2-yl)(picolyl)amine; Hmimppa = ((1-methylimidazole-2-yl)methyl)((2-pyridyl)methyl)(2-hydroxyphenyl)amine; TCC = tetrachlorocatechol) were synthesized and characterized by various techniques such as X-ray crystallography, mass spectrometry, IR, EPR, and UV/vis spectroscopy, cyclic voltammetry, and elemental analysis. 1 and 2 crystallize in the triclinic space group Ponemacr; (No. 2), 4 and 6 crystallize in the monoclinic space group P2(1)/n (No. 14), and 5 crystallizes in the orthorhombic space group Pna2(1). Complexes 1-4 are structurally related to the proposed active site of the manganese-dependent extradiol-cleaving catechol dioxygenase exhibiting an N(4)O(2) donor set (1 and 2) or N(4)Cl(2) donor set (3 and 4). Cyclic voltammetric data show that the substitution of oxygen donor atoms with chloride causes a shift of redox potentials to more positive values. These compounds show high catalytic activity regarding the oxidation of 3,5-di-tert-butylcatechol to 3,5-di-tert-butylquinone exhibiting saturation kinetics at high substrate concentrations. The turnover numbers k(cat) = (86 +/- 7) h(-1) (1), k(cat) = (101 +/- 4) h(-1) (2), k(cat) = (230 +/- 4) h(-1) (3), and k(cat) = (130 +/- 4) h(-1) (4) were determined from the double reciprocal Lineweaver-Burk plot. Compounds 5 and 6 can be regarded as structural and electronic Mn analogues for substituted forms of Fe-containing intradiol-cleaving catechol dioxygenases. To our knowledge 5 is the first mononuclear Mn(II) compound featuring an N(3)OCl(2) donor set.

Characterization of a novel thermostable Mn(II)-dependent 2,3-dihydroxybiphenyl 1,2-dioxygenase from a polychlorinated biphenyl- and naphthalene-degrading Bacillus sp. JF8

A novel thermostable Mn(II)-dependent 2,3-dihydroxybiphenyl-1,2-dioxygenase (BphC_JF8) catalyzing the meta-cleavage of the hydroxylated biphenyl ring was purified from the thermophilic biphenyl and naphthalene degrader, Bacillus sp. JF8, and the gene was cloned. The native and recombinant BphC enzyme was purified to homogeneity. The enzyme has a molecular mass of 125 +/- 10 kDa and was composed of four identical subunits (35 kDa). BphC_JF8 has a temperature optimum of 85 degrees C and a pH optimum of 7.5. It exhibited a half-life of 30 min at 80 degrees C and 81 min at 75 degrees C, making it the most thermostable extradiol dioxygenase studied. Inductively coupled plasma mass spectrometry analysis confirmed the presence of 4.0-4.8 manganese atoms per enzyme molecule. The EPR spectrum of BphC_JF8 exhibited g = 2.02 and g = 4.06 signals having the 6-fold hyperfine splitting characteristic of Mn(II). The enzyme can oxidize a wide range of substrates, and the substrate preference was in the order 2,3-dihydroxybiphenyl > 3-methylcatechol > catechol > 4-methylcatechol > 4-chlorocatechol. The enzyme is resistant to denaturation by various chelators and inhibitors (EDTA, 1,10-phenanthroline, H2O2, 3-chlorocatechol) and did not exhibit substrate inhibition even at 3 mm 2,3-dihydroxybiphenyl. A decrease in Km accompanied an increase in temperature, and the Km value of 0.095 microm for 2,3-dihydroxybiphenyl (at 60 degrees C) is among the lowest reported. The kinetic properties and thermal stability of the native and recombinant enzyme were identical. The primary structure of BphC_JF8 exhibits less than 25% sequence identity to other 2,3-dihydroxybiphenyl 1,2-dioxygenases. The metal ligands and active site residues of extradiol dioxygenases are conserved, although several amino acid residues found exclusively in enzymes that preferentially cleave bicyclic substrates are missing in BphC_JF8. A three-dimensional homology model of BphC_JF8 provided a basis for understanding the substrate specificity, quaternary structure, and stability of the enzyme.

Functional analysis of the copper-dependent quercetin 2,3-dioxygenase. 1. Ligand-induced coordination changes probed by X-ray crystallography: inhibition, ordering effect, and mechanistic insights

The crystal structures of the copper-dependent Aspergillus japonicus quercetin 2,3-dioxygenase (2,3QD) complexed with the inhibitors diethyldithiocarbamate (DDC) and kojic acid (KOJ) are reported at 1.70 and 2.15 A resolution, respectively. Both inhibitors asymmetrically chelate the metal center and assume a common orientation in the active site cleft. Their molecular plane blocks access to the inner portion of the cavity which is lined by the side chains of residues Met51, Thr53, Phe75, Phe114, and Met123 and which is believed to bind the flavonol B-ring of the natural substrate. The binding of the inhibitors brings order into the mixed coordination observed in the native enzyme. DDC and KOJ induce a single conformation of the Glu73 side chain, although in different ways. In the presence of DDC, Glu73 is detached from the copper ion with its carboxylate moiety pointing away from the active site cavity. In contrast, when KOJ is bound, Glu73 ligates the Cu ion through its O(epsilon)(1) atom with a monodentate geometry. Compared to the native coordinating conformation, this conformation is approximately 90 degrees rotated about the chi(3) angle. This latter Glu73 conformation is compatible with the presence of a bound substrate.

Functional analysis of the copper-dependent quercetin 2,3-dioxygenase. 2. X-ray absorption studies of native enzyme and anaerobic complexes with the substrates quercetin and myricetin

Quercetin 2,3-dioxygenase (2,3QD) is a mononuclear copper-dependent dioxygenase which catalyzes the cleavage of the heterocyclic ring of the flavonol quercetin (5,7,3',4'-tetrahydroxy flavonol) to produce 2-protocatechuoyl-phloroglucinol carboxylic acid and carbon monoxide. In this study, X-ray absorption spectroscopy has been used to characterize the local structural environment of the Cu(2+) center of Aspergillus japonicus 2,3QD. Analysis of the EXAFS region of native 2,3QD at functionally relevant pH (pH 6.0) indicates an active site equally well-described by either four or five ligands (3N(His) + 1-2O) at an average distance of 2.00 A. Bond valence sum analysis confirms that the best model is somewhere between the two. When, however, 2,3QD is anaerobically complexed with its natural substrate quercetin, the copper environment undergoes a transition to a five-coordinated cage, which is also best modeled by a single shell of N/O scatterers at the average distance of 2.00 A. This coordination is independently confirmed by the anaerobic complex with myricetin (5'-hydroxy quercetin). XANES analysis confirms that substrate binding does not reduce the Cu(2+) ion. The present study gives the first direct insights into the coordination chemistry of the enzyme complexed with its substrates. It suggests that activation for O(2) attack is achieved by monodentate substrate complexation to the copper ion through the 3-hydroxyl group. In addition, monodentate carboxylate ligation by the Glu73 side chain is likely to play a role in the fine-tuning of the equilibrium leading to the formation of the activated E.S complex.

Crystal structure of the copper-containing quercetin 2,3-dioxygenase from Aspergillus japonicus

Quercetin 2,3-dioxygenase is a copper-containing enzyme that catalyzes the insertion of molecular oxygen into polyphenolic flavonols. Dioxygenation catalyzed by iron-containing enzymes has been studied extensively, but dioxygenases employing other metal cofactors are poorly understood. We determined the crystal structure of quercetin 2,3-dioxygenase at 1.6 A resolution. The enzyme forms homodimers, which are stabilized by an N-linked heptasaccharide at the dimer interface. The mononuclear type 2 copper center displays two distinct geometries: a distorted tetrahedral coordination, formed by His66, His68, His112, and a water molecule, and a distorted trigonal bipyramidal environment, which additionally comprises Glu73. Manual docking of the substrate quercetin into the active site showed that the different geometries of the copper site might be of catalytic importance.

Spectroscopic and electronic structure studies of protocatechuate 3,4-dioxygenase: nature of tyrosinate-Fe(III) bonds and their contribution to reactivity

The geometric and electronic structure of the high-spin ferric active site of protocatechuate 3,4-dioxygenase (3,4-PCD) has been examined by absorption (Abs), circular dichroism (CD), magnetic CD (MCD), and variable-temperature-variable-field (VTVH) MCD spectroscopies. Density functional (DFT) and INDO/S-CI molecular orbital calculations provide complementary insight into the electronic structure of 3,4-PCD and allow an experimentally calibrated bonding scheme to be developed. Abs, CD, and MCD indicate that there are at least seven transitions below 35 000 cm(-1) which arise from tyrosinate ligand-to-metal-charge transfer (LMCT) transitions. VTVH MCD spectroscopy gives the polarizations of these LMCT bands in the principal axis system of the D-tensor, which is oriented relative to the molecular structure from the INDO/S-CI calculations. Three transitions are associated with the equatorial tyrosinate and four with the axial tyrosinate. This large number of transitions per tyrosinate is due to the pi and importantly the sigma overlap of the two tyrosinate valence orbitals with the metal d orbitals and is governed by the Fe-O-C angle and the Fe-O-C-C dihedral angles. The previously reported crystal structure indicates that the Fe-O-C angles are 133 degrees and 148 degrees for the equatorial and axial tyrosinate, respectively. Each tyrosinate has transitions at different energies with different intensities, which correlate with differences in geometry that reflect pseudo-sigma bonding to the Fe(III) and relate to reactivity. These factors reflect the metal-ligand bond strength and indicate that the axial tyrosinate-Fe(III) bond is weaker than the equatorial tyrosinate-Fe(III) bond. Furthermore, it is found that the differences in geometry, and hence electronic structure, are imposed by the protein. The consequences to catalysis are significant because the axial tyrosinate has been shown to dissociate upon substrate binding and the equatorial tyrosinate in the enzyme-substrate complex is thought to influence asymmetric binding of the chelated substrate moiety via a strong trans influence which activates the substrate for reaction with O2.

Novel insights into the basis for Escherichia coli superoxide dismutase's metal ion specificity from Mn-substituted FeSOD and its very high E(m)

Fe and Mn are both entrained to the same chemical reaction in apparently superimposable superoxide dismutase (SOD) proteins. However, neither Fe-substituted MnSOD nor Mn-substituted FeSOD is active. We have proposed that the two SOD proteins must apply very different redox tuning to their respective metal ions and that tuning appropriate for one metal ion results in a reduction potential (E(m)) for the other metal ion that is either too low (Fe) or too high (Mn) [Vance and Miller (1998) J. Am. Chem. Soc. 120, 461-467]. We have demonstrated that this is true for Fe-substituted MnSOD from Escherichia coli and that this metal ion-protein combination retains the ability to reduce but not oxidize superoxide. We now demonstrate that the corollary is also true: Mn-substituted FeSOD [Mn(Fe)SOD] has a very high E(m). Specifically, we have measured the E(m) of E. coli MnSOD to be 290 mV vs NHE. We have generated Mn(Fe)SOD and find that Mn is bound in an environment similar to that of the native (Mn)SOD protein. However, the E(m) is greater than 960 mV vs NHE and much higher than MnSOD's E(m) of 290 mV. We propose that the different tuning stems from different hydrogen bonding between the proteins and a molecule of solvent that is coordinated to the metal ion in both cases. Because a proton is taken up by SOD upon reduction, the protein can exert very strong control over the E(m), by modulating the degree to which coordinated solvent is protonated, in both oxidation states. Thus, coordinated solvent molecules may have widespread significance as "adapters" by which proteins can control the reactivity of bound metal ions.

Kinetics of manganese lipoxygenase with a catalytic mononuclear redox center

Manganese lipoxygenase was isolated from the take-all fungus, Gaeumannomyces graminis, and the oxygenation mechanism was investigated. A kinetic isotope effect, k(H)/k(D) = 21-24, was observed with [U-(2)H]linoleic acid as a substrate. The relative biosynthesis of (11S)-hydroperoxylinoleate (11S-HPODE) and (13R)-hydroperoxylinoleate (13R-HPODE) was pH-dependent and changed by [U-(2)H]linoleic acid. Stopped-flow kinetic traces of linoleic and alpha-linolenic acids indicated catalytic lag times of approximately 45 ms, which were followed by bursts of enzyme activity for approximately 60 ms and then by steady state (k(cat) approximately 26 and approximately 47 s(-1), respectively). 11S-HPODE was isomerized by manganese lipoxygenase to 13R-HPODE and formed from linoleic acid at the same rates (k(cat) 7-9 s(-1)). Catalysis was accompanied by collisional quenching of the long wavelength fluorescence (640-685 nm) by fatty acid substrates and 13R-HPODE. Electron paramagnetic resonance (EPR) of native manganese lipoxygenase showed weak 6-fold hyperfine splitting superimposed on a broad resonance indicating two populations of Mn(II) bound to protein. The addition of linoleic acid decreased both components, and denaturation of the lipoxygenase liberated approximately 0.8 Mn(2+) atoms/lipoxygenase molecule. These observations are consistent with a mononuclear Mn(II) center in the native state, which is converted during catalysis to an EPR silent Mn(III) state. We propose that manganese lipoxygenase has kinetic and redox properties similar to iron lipoxygenases.