The kilE locus of promiscuous IncP alpha plasmid RK2 is required for stable maintenance in Pseudomonas aeruginosa

Transcriptome Analysis of Zygotic Induction During Conjugative Transfer of Plasmid RP4

Conjugative transfer of bacterial plasmid is one of the major mechanisms of horizontal gene transfer, which is mediated by direct contact between donor and recipient cells. Gene expression of a conjugative plasmid is tightly regulated mostly by plasmid-encoded transcriptional regulators, but it remains obscure how differently plasmid genes are expressed in each cell during the conjugation event. Here, we report a comprehensive analysis of gene expression during conjugative transfer of plasmid RP4, which is transferred between isogenic strains of Pseudomonas putida KT2440 at very high frequency. To discriminate the expression changes in the donor and recipient cells, we took advantage of conjugation in the presence of rifampicin (Rif). Within 10 min of mating, we successfully detected transient transcription of plasmid genes in the resultant transconjugant cells. This phenomenon known as zygotic induction is likely attributed to derepression of multiple RP4-encoded repressors. Interestingly, we also observed that the traJIH operon encoding relaxase and its auxiliary proteins were upregulated specifically in the donor cells. Identification of the 5′ end of the zygotically induced traJ mRNA confirmed that the transcription start site of traJ was located 24-nt upstream of the nick site in the origin of transfer (oriT) as previously reported. Since the traJ promoter is encoded on the region to be transferred first, the relaxase may be expressed in the donor cell after regeneration of the oriT-flanking region, which in itself is likely to displace the autogenous repressors around oriT. This study provides new insights into the regulation of plasmid transfer processes.

Transfer of the cloned Salmonella SPI-1 type III secretion system and characterization of its expression mechanisms in Gram negative bacteria in comparison with cloned SPI-2

Cloned type III secretion systems have much potential to be used for bacterial engineering purposes involving protein secretion and substrate translocation directly into eukaryotic cells. We have previously cloned the SPI-1 and SPI-2 type III systems from the Salmonella enterica serovar Typhimurium genome using plasmid R995 which can conveniently capture large genomic segments for transfer between bacterial strains. However, though expressed and functional in Salmonella strains, cloned SPI-1 was previously observed to have a serious expression defect in other Gram negative bacteria including Escherichia coli. Here we show that cloned SPI-1 expression and secretion can be detected in the secretion preps from E. coli and Citrobacter indicating the first observation of non-Salmonella SPI-1 expression. We describe a compatible plasmid system to introduce engineered SPI-1 substrates into cloned SPI-1 strains. However, a SPI-1 translocation defect is still observed in E. coli, and we show that this is likely due to a defect in SipB expression/secretion in this species. In addition, we also examined the requirement for the hilA and ssrAB regulators in the expression of cloned SPI-1 and SPI-2, respectively. We found a strict requirement for hilA for full cloned SPI-1 expression and secretion. However, though we found that ssrAB is required for full cloned SPI-2 expression in a range of media across different bacteria, it is not required for cloned SPI-2 expression in MgM8 inducing media in S. Typhimurium. This suggests that under SPI-2 inducing conditions in S. Typhimurium, other factors can substitute for loss of ssrAB in cloned SPI-2 expression. The results provide key foundational information for the future use of these cloned systems in bacteria.

Engineering large functional plasmids for biosafety

Large bacterial plasmid constructs (generally 25-100 kb, but can be greater), such as those engineered with DNA encoding specific functions such as protein secretion or specialized metabolism, can carry antibiotic resistance genes and/or conjugation systems that typically must be removed before use in medical or environmental settings due to biosafety concerns. However, a convenient in vivo recombineering approach for intact large plasmids to sequentially remove multiple different genes using non-antibiotic selection methods is not described in the literature to our knowledge. We developed strategies and reagents for convenient removal of antibiotic resistance markers and conjugation genes while retaining non-antibiotic-based plasmid selection to increase practical utility of large engineered plasmids. This approach utilizes targeted lambda Red recombination of PCR products encoding the trpE and asd genes and as well as FLP/FRT-mediated marker removal. This is particularly important given that use of restriction enzymes with plasmids of this size is extremely problematic and often not feasible. This report provides the first example of the trpE gene/tryptophan prototrophy being used for recombineering selection. We applied this strategy to the plasmids R995+SPI-1 and R995+SPI-2 which encode cloned type III secretion systems to allow protein secretion and substrate delivery to eukaryotic cells. The resulting constructs are functional, stably maintained under conditions where the original constructs are unstable, completely defective for conjugative transfer, and transferred via electroporation.

Bacterial partitioning proteins affect the subcellular location of broad-host-range plasmid RK2

It has been demonstrated that plasmids are not randomly distributed but are located symmetrically in mid-cell, or (1/4), (3/4) positions in bacterial cells. In this work we compared the localization of broad-host-range plasmid RK2 mini-replicons, which lack an active partitioning system, in Escherichia coli and Pseudomonas putida cells. In E. coli the location of the plasmid mini-replicon cluster was at the cell poles. In contrast, in Pseudomonas cells, as a result of the interaction of chromosomally encoded ParB protein with RK2 centromere-like sequences, these mini-derivatives were localized in the proximity of mid-cell, or (1/4), (3/4) positions. The expression of the Pseudomonas parAB genes in E. coli resulted in a positional change in the RK2 mini-derivative to the mid-cell or (1/4), (3/4) positions. Moreover, in a P. putida parAB mutant, both RK2 mini-derivatives and the entire RK2 plasmid exhibited disturbances of subcellular localization. These observations raise the possibility that in certain bacteria chromosomally encoded partitioning machinery could affect subcellular plasmid positioning.

Cloning and transfer of the Salmonella pathogenicity island 2 type III secretion system for studies of a range of gram-negative genera

The engineering of bacterial strains with specific phenotypes frequently requires the use of blocks or "cassettes" of genes that act together to perform a desired function. The potential benefits of utilizing type III secretion systems in this regard are becoming increasingly realized since these systems can be used to direct interactions with host cells for beneficial purposes such as vaccine development, anticancer therapies, and targeted protein delivery. However, convenient methods to clone and transfer type III secretion systems for studies of a range of different types of bacteria are lacking. In addition to functional applications, such methods would also reveal important information about the evolution of a given type III secretion system, such as its ability to be expressed and functional outside of the strain of origin. We describe here the cloning of the Salmonella enterica serovar Typhimurium pathogenicity island 2 (SPI-2) type III secretion system onto a vector that can be easily transferred to a range of gram-negative bacterial genera. We found that expression of the cloned SPI-2 system in different Gammaproteobacteria and Alphaproteobacteria (as monitored by SseB protein levels) is dependent on the bacterial strain and growth medium. We also demonstrate that the cloned system is functional for secretion, can direct interactions with macrophages, and can be used as a novel tool to analyze the predicted interaction of SseB with host cells. This work provides a foundation for future applications where the cloned SPI-2 region (or other cloned type III systems) can provide a desired function to an engineered gram-negative strain.

Genomics of IncP-1 antibiotic resistance plasmids isolated from wastewater treatment plants provides evidence for a widely accessible drug resistance gene pool

The dramatic spread of antibiotic resistance is a crisis in the treatment of infectious diseases that affect humans. Several studies suggest that wastewater treatment plants (WWTP) are reservoirs for diverse mobile antibiotic resistance elements. This review summarizes findings derived from genomic analysis of IncP-1 resistance plasmids isolated from WWTP bacteria. Plasmids that belong to the IncP-1 group are self-transmissible, and transfer to and replicate in a wide range of hosts. Their backbone functions are described with respect to their impact on vegetative replication, stable maintenance and inheritance, mobility and plasmid control. Accessory genetic modules, mainly representing mobile genetic elements, are integrated in-between functional plasmid backbone modules. These elements carry determinants conferring resistance to nearly all clinically relevant antimicrobial drug classes, to heavy metals, and quaternary ammonium compounds used as disinfectants. All plasmids analysed here contain integrons that potentially facilitate integration, exchange and dissemination of resistance gene cassettes. Comparative genomics of accessory modules located on plasmids from WWTP and corresponding modules previously identified in other bacterial genomes revealed that animal, human and plant pathogens and other bacteria isolated from different habitats share a common pool of resistance determinants.

Plasmid pBP136 from Bordetella pertussis represents an ancestral form of IncP-1beta plasmids without accessory mobile elements

The complete 41,268 bp nucleotide sequence of the IncP-1beta plasmid pBP136 from the human pathogen Bordetella pertussis, the primary aetiological agent of whooping cough, was determined and analysed. This plasmid carried a total of 46 ORFs: 44 ORFs corresponding to the genes in the conserved IncP-1beta backbone, and 2 ORFs similar to the XF1596 and XF1597 genes with unknown function of the plant pathogen Xylella fastidiosa. Interestingly, pBP136 had no accessory genes carrying genetic traits such as antibiotic or mercury resistance and/or xenobiotic degradation. Moreover, pBP136 had only two of the kle genes (kleAE) that have been reported to be important for the stability of IncP-1 plasmid in Pseudomonas aeruginosa. Phylogenetic analysis of the Kle proteins revealed that the KleA and KleE of pBP136 were phylogenetically distant from those of the present IncP-1 plasmids. In contrast, IncC1 and KorC, encoded upstream and downstream of the kle genes respectively, and the replication-initiation protein, TrfA, were closely related to those of the IncP-1beta 'R751 group'. These results suggest that (i) pBP136 without any apparent accessory genes diverged early from an ancestor of the present IncP-1beta plasmids, especially those of the R751 group, and (ii) the kle genes might be incorporated independently into the backbone region of the IncP-1 plasmids for their stable maintenance in various host cells.

Frequent conjugative transfer accelerates adaptation of a broad-host-range plasmid to an unfavorable Pseudomonas putida host

IncP-1 plasmids are known to be promiscuous, but it is not understood if they are equally well adapted to various species within their host range. Moreover, little is known about their fate in bacterial communities. We determined if the IncP-1beta plasmid pB10 was unstable in some Proteobacteria, and whether plasmid stability was enhanced after long-term carriage in a single host and when regularly switched between isogenic hosts. Plasmid pB10 was found to be very unstable in Pseudomonas putida H2, and conferred a high cost (c. 20% decrease in fitness relative to the plasmid-free host). H2(pB10) was then evolved under conditions that selected for plasmid maintenance, with or without regular plasmid transfer (host-switching). When tested in the ancestral host, the evolved plasmids were more stable and their cost was significantly reduced (9% and 16% for plasmids from host-switched and nonswitched lineages, respectively). Our findings suggest that IncP-1 plasmids can rapidly adapt to an unfavorable host by improving their overall stability, and that regular conjugative transfer accelerates this process.

Cloning of a functional Salmonella SPI-1 type III secretion system and development of a method to create mutations and epitope fusions in the cloned genes

Bacterial type III secretion systems have significant potential to be harnessed for beneficial purposes including vaccine development, anti-cancer therapies, strategies to counteract harmful bacteria-host interactions, and evolutionary studies. The ability to clone and manipulate type III secretion systems would allow researchers to perform novel experiments that would progress the biotechnological development of the potentially positive uses of these systems. Here, we report the cloning of the entire Salmonella pathogenicity island 1 (SPI-1) type III secretion system on a single DNA fragment that is contained on a self-transmissible plasmid vector for convenient transfer to alternate hosts. We demonstrate that the cloned SPI-1 type III system is functional for secretion and translocation via complementation of an S. typhimurium Delta SPI-1 strain. We also present a convenient method to construct mutations and epitope fusions in the cloned type III genes and demonstrate that the engineered substrate protein fusions are recognized by the cloned type III system. We transferred the cloned SPI-1 type III system into bacterial strains of different genera and found that there is a SPI-1 gene expression defect in these strains. The results describe a novel strategy for cloning and manipulation of bacterial secretion system gene clusters and provide a foundation for future studies to develop the beneficial uses of cloned type III secretion systems.

A new experimental approach for studying bacterial genomic island evolution identifies island genes with bacterial host-specific expression patterns

Background

Genomic islands are regions of bacterial genomes that have been acquired by horizontal transfer and often contain blocks of genes that function together for specific processes. Recently, it has become clear that the impact of genomic islands on the evolution of different bacterial species is significant and represents a major force in establishing bacterial genomic variation. However, the study of genomic island evolution has been mostly performed at the sequence level using computer software or hybridization analysis to compare different bacterial genomic sequences. We describe here a novel experimental approach to study the evolution of species-specific bacterial genomic islands that identifies island genes that have evolved in such a way that they are differentially-expressed depending on the bacterial host background into which they are transferred.

Results

We demonstrate this approach by using a "test" genomic island that we have cloned from the Salmonella typhimurium genome (island 4305) and transferred to a range of Gram negative bacterial hosts of differing evolutionary relationships to S. typhimurium. Systematic analysis of the expression of the island genes in the different hosts compared to proper controls allowed identification of genes with genera-specific expression patterns. The data from the analysis can be arranged in a matrix to give an expression "array" of the island genes in the different bacterial backgrounds. A conserved 19-bp DNA site was found upstream of at least two of the differentially-expressed island genes. To our knowledge, this is the first systematic analysis of horizontally-transferred genomic island gene expression in a broad range of Gram negative hosts. We also present evidence in this study that the IS200 element found in island 4305 in S. typhimurium strain LT2 was inserted after the island had already been acquired by the S. typhimurium lineage and that this element is likely not involved in the integration or excision of island 4305.

Conclusion

The "clone-and-transfer" approach of evolutionary study identifies genes whose expression patterns indicate the existence of genera-specific regulatory mechanisms that influence the expression of horizontally-transferred DNA sections. The results provide key information that can be used to facilitate the identification of these regulatory mechanisms.

VEX-capture: a new technique that allows in vivo excision, cloning, and broad-host-range transfer of large bacterial genomic DNA segments

We have developed a novel and easily performed procedure for the targeted excision, cloning, and broad-host-range transfer of large bacterial genomic DNA segments. This procedure, called Vector-mediated excision and Capture (VEX-Capture), represents a new molecular tool for the convenient manipulation and exchange of large (20-40+ kb) bacterial genomic fragments. VEX-Capture utilizes lox/Cre-mediated site-specific recombination for excision of the targeted genomic segment and homologous recombination for cloning of the excised DNA section onto a self-transmissible, broad-host-range IncP plasmid. The "captured" genomic DNA segment can then be transferred to a wide variety of Gram-negative hosts for basic research and bioengineering purposes. To demonstrate the utility and function of VEX-Capture, we have excised and cloned three separate genomic islands from the Salmonella typhimurium chromosome ranging in size from 26.7 to 40.0 kb. To test the ability of these islands to be established in different bacterial hosts, we transferred them to six other Gram-negative species and monitored their establishment via phenotypic and molecular analysis. RT-PCR was used to assay the expression of selected S. typhimurium island genes in the different species. This analysis led to the discovery that an island-encoded master regulator of S. typhimurium virulence functions is expressed in a species-specific manner. Our results demonstrate the potential for VEX-Capture to be used as a convenient genetic technique for fundamental biological applications in a wide variety of bacterial species.

Host-specific incompatibility by 9-bp direct repeats indicates a role in the maintenance of broad-host-range plasmid RK2

Broad-host-range incompatibility group P (IncP) plasmids RK2 and R751 have 9-bp direct repeats (DR) of unknown function located between their kilC and kilE loci. The nucleotide sequences of the 9-bp repeats are different for RK2 (an IncPalpha group plasmid) and R751 (IncPbeta group), but both DR regions are organized similarly, including an 11-bp spacer with identical 5'-CGCCA-3' cores and an adjacent binding site for KorB, a known partition protein and transcriptional repressor. The occurrence of similarly arranged DR elements with different repeat sequences is suggestive of an important plasmid-specific function for the DR regions. Here we show that the cloned RK2 DR region in trans to RK2 exhibits a host-specific incompatibility phenotype, in which RK2 is destabilized in Pseudomonas aeruginosa but not in Escherichia coli. Incompatibility was not dependent on the adjacent KorB-binding site. Deletion of the kilE locus, which is required for stable maintenance in P. aeruginosa, did not abolish DR-mediated incompatibility. Precise deletion of DR from RK2 had no effect on maintenance but eliminated sensitivity to DR in trans, showing that incompatibility requires DR to be present on both plasmids. These results raise the possibility that the DR region may be involved in a plasmid maintenance system for P. aeruginosa that is independent of the known stability functions on RK2.

The active partition gene incC of IncP plasmids is required for stable maintenance in a broad range of hosts

Plasmids of incompatibility group P (IncP) are capable of replication and stable inheritance in a wide variety of gram-negative bacteria. Three determinants of IncP plasmids are components of an active partition locus that is predicted to function in the segregation of plasmid copies to daughter cells. These determinants are incC, which codes for a member of the ParA family of partition ATPases; korB, which specifies a DNA-binding protein that also functions as a global transcriptional repressor; and O(B), the DNA target for KorB, which occurs at multiple locations on IncP plasmids. To determine the importance and host range of the IncC/KorB partition system in the maintenance of IncP plasmids, we constructed an in-frame deletion of incC in the otherwise intact 60-kb IncP alpha plasmid R995. R995 Delta incC was found to be highly unstable in Escherichia coli, Pseudomonas aeruginosa, Pseudomonas putida, Agrobacterium tumefaciens, and Acinetobacter calcoaceticus, whereas wild-type R995 is stable in all these hosts. In addition, R995 Delta incC could not be established in Actinobacillus actinomycetemcomitans. trans-Complementation analysis showed that the coding region for IncC2 polypeptide, which is expressed from an internal translational start within the incC gene, was sufficient to restore stable maintenance to wild-type levels. The results show that the IncC/KorB active partition system of IncP plasmids is remarkably proficient for stable maintenance in diverse bacteria.

A small protein-protein interaction domain common to KlcB and global regulators KorA and TrbA of promiscuous IncP plasmids

The kor regulon of broad host-range, incompatibility group P (IncP) plasmids uses the KorA, KorB, and KorC repressors to regulate expression of genes for replication, conjugation, segregation, and host range. One operon, kilC, encodes the KorC repressor and two genes of unknown function (klcA and klcB). The predicted sequences of the 51.1 kDa KlcB protein, the 11.3 kDa KorA repressor, and another small (13.5 kDa) regulatory protein, TrbA, show a highly related 35 amino acid residue segment (V-L-P domain). We found that induction of the klcB gene is toxic to Escherichia coli host cells harboring an IncP plasmid. We confirmed a model in which the V-L-P domain of KlcB interacts directly with the V-L-P domain of KorA to derepress KorA-regulated operons, thereby allowing expression of toxic genes. First, a lacZ reporter fused to the kleA promoter, which is regulated by KorA and KorC, revealed that klcB induction specifically releases KorA-repression but has no effect on KorC repression. Second, induced expression of the V-L-P domains from KorA or KlcB is sufficient to release KorA-repression at the kleA promoter. Third, purified GST-KlcB fusion protein interacts specifically with His-tagged KorA. Fourth, fusion of the V-L-P domains of KorA and TrbA and full-length KlcB polypeptide to the DNA-binding domain of bacteriophage lambda repressor leads to the formation of functional, dimeric repressors, and mutations that alter conserved residues of the V-L-P domain adversely affect dimerization. Fifth, crosslinking experiments demonstrated that the V-L-P domain of KorA is able to dimerize in solution and form heterodimers in mixtures with full-length KorA polypeptide. These findings show that the V-L-P domain is a protein-protein interaction module that is likely to be responsible for dimerization of KorA and TrbA, and important for KlcB dimerization. We speculate on the possible significance of KlcB-KorA heterodimers in IncP plasmid maintenance.

Incompatibility protein IncC and global regulator KorB interact in active partition of promiscuous plasmid RK2

Replication of the broad-host-range, IncPalpha plasmid RK2 requires two plasmid loci: trfA, the replication initiator gene, and oriV, the origin of replication. While these determinants are sufficient for replication in a wide variety of bacteria, they do not confer the stable maintenance of parental RK2 observed in its hosts. The product of the incC gene has been proposed to function in the stable maintenance of RK2 because of its relatedness to the ParA family of ATPases, some of which are known to be involved in the active partition of plasmid and chromosomal DNA. Here we show that IncC has the properties expected of a component of an active partition system. The smaller polypeptide product of incC (IncC2) exhibits a strong, replicon-independent incompatibility phenotype with RK2. This incompatibility phenotype requires the global transcriptional repressor, KorB, and the target for incC-mediated incompatibility is a KorB-binding site (O(B)). We found that KorB and IncC interact in vivo by using the yeast two-hybrid system and in vitro by using partially purified proteins. Elevated expression of the incC and korB genes individually has no obvious effect on Escherichia coli cell growth, but their simultaneous overexpression is toxic, indicating a possible interaction of IncC-KorB complexes with a vital host target. A region of RK2 bearing incC, korB, and multiple KorB-binding sites is able to stabilize an unstable, heterologous plasmid in an incC-dependent manner. Finally, elevated levels of IncC2 cause RK2 to aggregate, indicating a possible role for IncC in plasmid pairing. These findings demonstrate that IncC, KorB, and at least one KorB-binding site are components of an active partition system for the promiscuous plasmid RK2.

The partitioning activity of the RK2 central control region requires only incC, korB and KorB-binding site O(B)3 but other KorB-binding sites form destabilizing complexes in the absence of O(B)3

The sector of the genome of broad-host-range IncP plasmid RK2 from kb coordinate 54.0 to 60.0 confers an active partitioning phenotype, increasing the segregational stability of low-copy-number unstable plasmids. This Par region encodes the central control operon (korA, incC, korB, korF and korG) and the associated genes kfrA, upf54.8 and upf54.4. Each ORF in this region was knocked out in turn and it was shown that only incC and korB are needed for the stability phenotype. incC encodes two polypeptides from alternative translational starts. A deletion of the start of the operon showed that only IncC2, the shorter product, is essential for partitioning. Directed mutation or deletion was used to inactivate in turn each of the three KorB-binding sites (O(B)s) which were candidate cis-acting sequences needed for stability. Only inactivation of O(B)3, which lies between upf54.4 and upf54.8, resulted in an increased rate of segregational loss. However, the rate of loss was significantly higher than the rate of loss of the test plasmid carrying none of this RK2 Par region. Either inactivation of korB or deletion of O(B)1 from this O(B)3 mutant resulted in restoration of the loss rate to that expected for the unstable test plasmid alone. Thus KorB can act on O(B)1 to create a complex that either inhibits replication or reduces the effective plasmid copy number, perhaps by promoting pairing between plasmid molecules. This implies that RK2 goes through a cycle of pairing and separation, akin to the mitotic cycle of eukaryotic chromosomes.

Complete sequence of the IncPbeta plasmid R751: implications for evolution and organisation of the IncP backbone

The broad host range IncP plasmids are of particular interest because of their ability to promote gene spread between diverse bacterial species. To facilitate study of these plasmids we have compiled the complete sequence of the IncPbeta plasmid R751. Comparison with the sequence of the IncPalpha plasmids confirms the conservation of the IncP backbone of replication, conjugative transfer and stable inheritance functions between the two branches of this family. As in the IncPalpha genome the DNA of this backbone appears to have been enriched for the GCCG/CGGC motifs characteristic of the genome of organisms with a high G+C content, such as P. aeruginosa, suggesting that IncPbeta plasmids have been subjected during their evolution to similar mutational and selective forces as IncPalpha plasmids and may have evolved in pseudomonad hosts. The IncP genome is consistently interrupted by insertion of phenotypic markers and/or transposable elements between oriV and trfA and between the tra and trb operons. The R751 genome reveals a family of repeated sequences in these regions which may form the basis of a hot spot for insertion of foreign DNA. Sequence analysis of the cryptic transposon Tn4321 revealed that it is not a member of the Tn21 family as we had proposed previously from an inspection of its ends. Rather it is a composite transposon defined by inverted repeats of a 1347 bp IS element belonging to a recently discovered family which is distributed throughout the prokaryotes. The central unique region of Tn4321 encodes two predicted proteins, one of which is a regulatory protein while the other is presumably responsible for an as yet unidentified phenotype. The most striking feature of the IncPalpha plasmids, the global regulation of replication and transfer by the KorA and KorB proteins encoded in the central control operon, is conserved between the two plasmids although there appear to be significant differences in the specificity of repressor-operator interactions. The importance of these global regulatory circuits is emphasised by the observation that the operator sequences for KorB are highly conserved even in contexts where the surrounding region, either a protein coding or intergenic sequence, has diverged considerably. There appears to be no equivalent of the parABCDE region which in the IncPalpha plasmids provides multimer resolution, lethality to plasmid-free segregants and active partitioning functions. However, we found that the continuous sector from co-ordinate 0 to 9100 bp, encoding the co-regulated klc and kle operons as well as the central control region, could confer a high degree of segregational stability on a low copy number test vector. Thus R751 appears to exhibit very clearly what was first revealed by study of the IncPalpha plasmids, namely a fully functional co-ordinately regulated set of replication, transfer and stable inheritance functions.

Contribution of different segments of the par region to stable maintenance of the broad-host-range plasmid RK2

A 3.2-kb region of the broad-host-range plasmid RK2 has been shown to encode a highly efficient plasmid maintenance system that functions in a vector-independent manner. This region, designated par, consists of two divergently arranged operons: parCBA and parDE. The 0.7-kb parDE operon promotes plasmid stability by a postsegregational killing mechanism that ensures that plasmid-free daughter cells do not survive after cell division. The 2.3-kb parCBA operon encodes a site-specific resolvase protein (ParA) and its multimer resolution site (res) and two proteins (ParB and ParC) whose functions are as yet unknown. It has been proposed that the parCBA operon encodes a plasmid partitioning system (M. Gerlitz, O. Hrabak, and H. Schwabb, J. Bacteriol. 172:6194-6203, 1990; R. C. Roberts, R. Burioni, and D. R. Helinski, J. Bacteriol. 172:6204-6216, 1990). To further define the role of this region in promoting the stable maintenance of plasmid RK2, the parCBA and parDE operons separately and the intact (parCBA/DE) par region (3.2 kb) were reintroduced into an RK2 plasmid deleted for par and assayed for plasmid stability in two Escherichia coli strains (MC1061K and MV10delta lac). The intact 3.2-kb region provided the highest degree of stability in the two strains tested. The ability of the parCBA or parDE region alone to promote stable maintenance in the E. coli strains was dependent on the particular strain and the growth temperature. Furthermore, the insertion of the ColE1 cer site into the RK2 plasmid deleted for the par region failed to stabilize the plasmid in the MC1061K strain, indicating that the multimer resolution activity encoded by parCBA is not by itself responsible for the stabilization activity observed for this operon. To examine the relative contributions of postsegregational cell killing and a possible partitioning function encoded by the intact 3.2-kb par region, stability assays were carried out with ParD provided in trans by a compatible (R6K) minireplicon to prevent postsegregational killing. In E. coli MV10delta lac, postsegregational killing appeared to be the predominant mechanism for stabilization since the presence of ParD substantially reduced the stability of plasmids carrying either the 3.2- or 0.7-kb region. However, in the case of E. coli MC1061K, the presence of ParD in trans did not result in a significant loss of stabilization by the 3.2-kb region, indicating that the putative partitioning function was largely responsible for RK2 maintenance. To examine the basis for the apparent differences in postsegregational killing between the two E. coli strains, transformation assays were carried out to determine the relative sensitivities of the strains to the ParE toxin protein. Consistent with the relatively small contribution of the postsegregational killing to plasmid stabilization in MC1061K, we found that this strain was substantially more resistant to killing by ParE in comparison to E. coli MV10delta lac. A transfer-deficient mutant of thepar-deleted plasmid was constructed for the stable maintenance studies. This plasmid was found to be lost from E. coli MV10delta lac at a rate three times greater than the rate for the transfer-proficient plasmid, suggesting that conjugation can also play a significant role in the maintenance of plasmid RK2.