Identification of two mannoproteins released from cell walls of a Saccharomyces cerevisiae mnn1 mnn9 double mutant by reducing agents

Towards unlocking the biocontrol potential of Pichia kudriavzevii for plant fungal diseases: in vitro and in vivo assessments with candidate secreted protein prediction

BACKGROUND

Plant fungal pathogens cause substantial economic losses through crop yield reduction and post-harvest storage losses. The utilization of biocontrol agents presents a sustainable strategy to manage plant diseases, reducing the reliance on hazardous chemical. Recently, Pichia kudriavzevii has emerged as a promising biocontrol agent because of its capacity to inhibit fungal growth, offering a potential solution for plant disease management.

RESULTS

Two novel Pichia kudriavzevii strains, Pk_EgyACGEB_O1 and Pk_EgyACGEB_O2, were isolated from olive brine samples. The microscopic characterization of the strains revealed similar structures. However, there were noticeable differences in their visual morphology. Based on their internal transcribed spacer (ITS) DNA sequences, Pk_EgyACGEB_O1 and Pk_EgyACGEB_O2 strains assigned by GenBank IDs MZ507552.1 and MZ507554.1 shared high sequence similarity (~ 99.8% and 99.5%) with P. kudriavzevii, respectively. Both strains were evaluated in vitro against plant pathogenic fungi. The strains revealed the ability to consistently inhibit fungal growth, with Pk_EgyACGEB_O2 showing higher effectiveness. In addition, both P. kudriavzevii strains effectively controlled grey mold disease caused by B. cinerea in golden delicious apples, suggesting their potential as sustainable and eco-friendly biocontrol agents for post-harvest diseases. Based on a comprehensive bioinformatics pipeline, candidate-secreted proteins responsible for the potent antifungal activity of P. kudriavzevii were identified. A total of 59 proteins were identified as common among the P. kudriavzevii CBS573, SD108, and SD129 strains. Approximately 23% of the secreted proteins in the P. kudriavzevii predicted secretome are hydrolases with various activities, including proteases, lipases, glycosidases, phosphatases, esterases, carboxypeptidases, or peptidases. In addition, a set of cell-wall-related proteins was identified, which might enhance the biocontrol activity of P. kudriavzevii by preserving the structure and integrity of the cell wall. A papain inhibitor was also identified and could potentially offer a supplementary defense against plant pathogens.

CONCLUSION

Our results revealed the biocontrol capabilities of P. kudriavzevii against plant pathogenic fungi. The research focused on screening novel strains for their ability to inhibit the growth of common pathogens, both in vitro and in vivo. This study shed light on how P. kudriavzevii interacts with fungal pathogens. The findings can help develop effective strategies for managing plant diseases.

Mechanism of commitment to a mating partner in Saccharomyces cerevisiae

Many cells detect and follow gradients of chemical signals to perform their functions. Yeast cells use gradients of extracellular pheromones to locate mating partners, providing a tractable model to understand how cells decode the spatial information in gradients. To mate, yeast cells must orient polarity toward the mating partner. Polarity sites are mobile, exploring the cell cortex until they reach the proper position, where they stop moving and "commit" to the partner. A simple model to explain commitment posits that a high concentration of pheromone is only detected upon alignment of partner cells' polarity sites, and causes polarity site movement to stop. Here we explore how yeast cells respond to partners that make different amounts of pheromone. Commitment was surprisingly robust to varying pheromone levels, ruling out the simple model. We also tested whether adaptive pathways were responsible for the robustness of commitment, but our results show that cells lacking those pathways were still able to accommodate changes in pheromone. To explain this robustness, we suggest that the steep pheromone gradients near each mating partner's polarity site trap the polarity site in place.

Peering Into Candida albicans Pir Protein Function and Comparative Genomics of the Pir Family

The fungal cell wall, comprised primarily of protein and polymeric carbohydrate, maintains cell structure, provides protection from the environment, and is an important antifungal drug target. Pir proteins (proteins with internal repeats) are linked to cell wall β-1,3-glucan and are best studied in Saccharomyces cerevisiae. Sequential deletion of S. cerevisiae PIR genes produces strains with increasingly notable cell wall damage. However, a true null mutant lacking all five S. cerevisiae PIR genes was never constructed. Because only two PIR genes (PIR1, PIR32) were annotated in the Candida albicans genome, the initial goal of this work was to construct a true Δpir/Δpir null strain in this species. Unexpectedly, the phenotype of the null strain was almost indistinguishable from its parent, leading to the search for other proteins with Pir function. Bioinformatic approaches revealed nine additional C. albicans proteins that share a conserved Pir functional motif (minimally DGQ). Examination of the protein sequences revealed another conserved motif (QFQFD) toward the C-terminal end of each protein. Sequence similarities and presence of the conserved motif(s) were used to identify a set of 75 proteins across 16 fungal species that are proposed here as Pir proteins. The Pir family is greatly expanded in C. albicans and C. dubliniensis compared to other species and the orthologs are known to have specialized function during chlamydospore formation. Predicted Pir structures showed a conserved core of antiparallel beta-sheets and sometimes-extensive loops that contain amino acids with the potential to form linkages to cell wall components. Pir phylogeny demonstrated emergence of specific ortholog groups among the fungal species. Variation in gene expression patterns was noted among the ortholog groups during growth in rich medium. PIR allelic variation was quite limited despite the presence of a repeated sequence in many loci. Results presented here demonstrate that the Pir family is larger than previously recognized and lead to new hypotheses to test to better understand Pir proteins and their role in the fungal cell wall.

Mycoremediation of heavy metals: processes, mechanisms, and affecting factors

Industrial processes and mining of coal and metal ores are generating a number of threats by polluting natural water bodies. Contamination of heavy metals (HMs) in water and soil is the most serious problem caused by industrial and mining processes and other anthropogenic activities. The available literature suggests that existing conventional technologies are costly and generated hazardous waste that necessitates disposal. So, there is a need for cheap and green approaches for the treatment of such contaminated wastewater. Bioremediation is considered a sustainable way where fungi seem to be good bioremediation agents to treat HM-polluted wastewater. Fungi have high adsorption and accumulation capacity of HMs and can be potentially utilized. The most important biomechanisms which are involved in HM tolerance and removal by fungi are bioaccumulation, bioadsorption, biosynthesis, biomineralisation, bioreduction, bio-oxidation, extracellular precipitation, intracellular precipitation, surface sorption, etc. which vary from species to species. However, the time, pH, temperature, concentration of HMs, the dose of fungal biomass, and shaking rate are the most influencing factors that affect the bioremediation of HMs and vary with characteristics of the fungi and nature of the HMs. In this review, we have discussed the application of fungi, involved tolerance and removal strategies in fungi, and factors affecting the removal of HMs.

A Differential Proteomic Approach to Characterize the Cell Wall Adaptive Response to CO2 Overpressure during Sparkling Wine-Making Process

In this study, a first proteomic approach was carried out to characterize the adaptive response of cell wall-related proteins to endogenous CO2 overpressure, which is typical of second fermentation conditions, in two wine Saccharomyces cerevisiae strains (P29, a conventional second fermentation strain, and G1, a flor yeast strain implicated in sherry wine making). The results showed a high number of cell wall proteins in flor yeast G1 under pressure, highlighting content at the first month of aging. The cell wall proteomic response to pressure in flor yeast G1 was characterized by an increase in both the number and content of cell wall proteins involved in glucan remodeling and mannoproteins. On the other hand, cell wall proteins responsible for glucan assembly, cell adhesion, and lipid metabolism stood out in P29. Over-represented proteins under pressure were involved in cell wall integrity (Ecm33p and Pst1p), protein folding (Ssa1p and Ssa2p), and glucan remodeling (Exg2p and Scw4p). Flocculation-related proteins were not identified under pressure conditions. The use of flor yeasts for sparkling wine elaboration and improvement is proposed. Further research based on the genetic engineering of wine yeast using those genes from protein biomarkers under pressure alongside the second fermentation in bottle is required to achieve improvements.

Cell surface display of proteins on filamentous fungi

Protein display approaches have been useful to endow the cell surface of yeasts with new catalytic activities so that they can act as enhanced whole-cell biocatalysts. Despite their biotechnological potential, protein display technologies remain poorly developed for filamentous fungi. The lignocellulolytic character of some of them coupled to the cell surface biosynthesis of valuable molecules by a single or a cascade of several displayed enzymes is an appealing prospect. Cell surface protein display consists in the co-translational fusion of a functional protein (passenger) to an anchor one, usually a cell-wall-resident protein. The abundance, spacing, and local environment of the displayed enzymes-determined by the relationship of the anchor protein with the structure and dynamics of the engineered cell wall-are factors that influence the performance of display-based biocatalysts. The development of protein display strategies in filamentous fungi could be based on the field advances in yeasts; however, the unique composition, structure, and biology of filamentous fungi cell walls require the customization of the approach to those microorganisms. In this prospective review, the cellular bases, the design principles, and the available tools to foster the development of cell surface protein display technologies in filamentous fungi are discussed.

Correlation of cell surface proteins of distinct Beauveria bassiana cell types and adaption to varied environment and interaction with the host insect

The insect fungal pathogen Beauveria bassiana produces a number of distinct cell types that include aerial conidia, blastospores and haemolymph-derived cells, termed hyphal bodies, to adapt varied environment niches and within the host insect. These cells display distinct biochemical properties and surface structures, and a highly ordered outermost brush-like structure uniquely present on hyphal bodies, but not on any in vitro cells. Here, we found that the outermost structure on the hyphal bodies mainly consisted of proteins associated to structural wall components in that most of it could be removed by dithiothreitol (DTT) or proteinase K. DTT-treatment also caused delayed germination, decreased tolerance to ultraviolet irradiation and virulence of conidia or blastospores, with decreased adherence and alternated carbohydrate epitopes, suggesting involvement in fungal development, stress responses and virulence. To characterize these cell surface molecules, proteins were released from the living cells using DTT, and identified and quantitated using label-free quantitative mass spectrometry. Thereafter, a series of bioinformatics programs were used to predict cell surface-associated proteins (CSAPs), and 96, 166 and 54 CSAPs were predicted from the identified protein pools of conidia, blastospores and hyphal bodies, respectively, which were involved in utilization of carbohydrate, nitrogen, and lipid, detoxification, pathogen-host interaction, and likely other cellular processes. Thirteen, sixty-nine and six CSAPs were exclusive in conidia, blastospores and hyphal bodies, respectively, which were verified by eGFP-tagged proteins at their N-terminus. Our data provide a crucial cue to understand mechanism of B. bassiana to adapt to varied environment and interaction with insect host.

Sensory input attenuation allows predictive sexual response in yeast

Animals are known to adjust their sexual behaviour depending on mate competition. Here we report similar regulation for mating behaviour in a sexual unicellular eukaryote, the budding yeast Saccharomyces cerevisiae. We demonstrate that pheromone-based communication between the two mating types, coupled to input attenuation by recipient cells, enables yeast to robustly monitor relative mate abundance (sex ratio) within a mixed population and to adjust their commitment to sexual reproduction in proportion to their estimated chances of successful mating. The mechanism of sex-ratio sensing relies on the diffusible peptidase Bar1, which is known to degrade the pheromone signal produced by mating partners. We further show that such a response to sexual competition within a population can optimize the fitness trade-off between the costs and benefits of mating response induction. Our study thus provides an adaptive explanation for the known molecular mechanism of pheromone degradation in yeast.

Cells of the yeast Saccharomyces cerevisiae can mate with other cells of opposite mating type. Here, the authors show that the combination of a pheromone and a pheromone-degrading enzyme allows yeast cells to monitor relative mate abundance within a population and adjust their commitment to sexual reproduction.

An Efficient Genome-Wide Fusion Partner Screening System for Secretion of Recombinant Proteins in Yeast

To produce rarely secreted recombinant proteins in the yeast Saccharomyces cerevisiae, we developed a novel genome-wide optimal translational fusion partner (TFP) screening system that involves recruitment of an optimal secretion signal and fusion partner. A TFP library was constructed from a genomic and truncated cDNA library by using the invertase-based signal sequence trap technique. The efficiency of the system was demonstrated using two rarely secreted proteins, human interleukin (hIL)-2 and hIL-32. Optimal TFPs for secretion of hIL-2 and hIL-32 were easily selected, yielding secretion of these proteins up to hundreds of mg/L. Moreover, numerous uncovered yeast secretion signals and fusion partners were identified, leading to efficient secretion of various recombinant proteins. Selected TFPs were found to be useful for the hypersecretion of other recombinant proteins at yields of up to several g/L. This screening technique could provide new methods for the production of various types of difficult-to-express proteins.

High cell density culture with S. cerevisiae CEN.PK113-5D for IL-1β production: optimization, modeling, and physiological aspects

Saccharomyces cerevisiae CEN.PK113-5D, a strain auxotrophic for uracil belonging to the CEN.PK family of the yeast S. cerevisiae, was cultured in aerated fed-batch reactor as such and once transformed to express human interleukin-1β (IL-1β), aiming at obtaining high cell densities and optimizing IL-1β production. Three different exponentially increasing glucose feeding profiles were tested, all of them "in theory" promoting respiratory metabolism to obtain high biomass/product yield. A non-structured non-segregated model was developed to describe the performance of S. cerevisiae CEN.PK113-5D during the fed-batch process and, in particular, its capability to metabolize simultaneously glucose and ethanol which derived from the precedent batch growth. Our study showed that the proliferative capacity of the yeast population declined along the fed-batch run, as shown by the exponentially decreasing specific growth rates on glucose. Further, a shift towards fermentative metabolism occurred. This shift took place earlier the higher was the feed rate and was more pronounced in the case of the recombinant strain. Determination of some physiological markers (acetate production, intracellular ROS accumulation, catalase activity and cell viability) showed that neither poor oxygenation nor oxidative stress was responsible for the decreased specific growth rate, nor for the shift to fermentative metabolism.

The contribution of Pir protein family to yeast cell surface display

Proteins with internal repeats (Pir) in the Baker's yeast are located on the cell wall and include four highly homologous members. Recently, Pir proteins have become increasingly used as anchor proteins in yeast cell surface display systems. These display systems are classified into three types: N-terminal fusion, C-terminal fusion, and inserted fusion. In addition to the GPI (glycosylphosphatidyl inositol) and the FL/FS anchor proteins, these three Pir-based systems significantly increase the choices for target proteins to be displayed. Furthermore, Pir proteins can also be used as a fusion partner for target proteins to be effectively secreted into culture medium. Here, we summarize the development and application of Pir proteins as anchor proteins.

Direct binding of the Kex2p cytosolic tail to the VHS domain of yeast Gga2p facilitates TGN to prevacuolar compartment transport and is regulated by phosphorylation

The VHS domains of yeast Gga1p and Gga2p bind sites (GBSs) in the Kex2p and Vps10p cytosolic tails. Phosphorylation of Ser-780 in the Kex2p GBS enhances Kex2p transport from the TGN to the PVC and is induced by cell wall damage. Kex2p GBS function is shown by direct binding, cell-free transport, and in vivo assays for Kex2 localization.

Human Golgi-localized, γ-ear–containing, ADP-ribosylation factor–binding proteins (Ggas) bind directly to acidic dileucine sorting motifs in the cytosolic tails (C-tails) of intracellular receptors. Despite evidence for a role in recruiting ubiquitinated cargo, it remains unclear whether yeast Ggas also function by binding peptide-sorting signals directly. Two-hybrid analysis shows that the Gga1p and Gga2p Vps27, Hrs, Stam (VHS) domains both bind a site in the Kex2p C-tail and that the Gga2p VHS domain binds a site in the Vps10p C-tail. Binding requires deletion of an apparently autoinhibitory sequence in the Gga2p hinge. Ser₇₈₀ in the Kex2p C-tail is crucial for binding: an Ala substitution blocks but an Asp substitution permits binding. Biochemical assays using purified Gga2p VHS–GGA and TOM1 (GAT) and glutathione S-transferase–Kex2p C-tail fusions show that Gga2p binds directly to the Kex2p C-tail, with relative affinities Asp₇₈₀ > Ser₇₈₀ > Ala₇₈₀. Affinity-purified antibody against a peptide containing phospho-Ser­₇₈₀ recognizes wild-type Kex2p but not S₇₈₀A Kex2p, showing that Ser₇₈₀ is phosphorylated in vivo; phosphorylation of Ser₇₈₀ is up-regulated by cell wall–damaging drugs. Finally, mutation of Ser₇₈₀ alters trafficking of Kex2p both in vivo and in cell-free trans-Golgi network (TGN)–prevacuolar compartment (PVC) transport. Thus yeast Gga adaptors facilitate TGN–PVC transport by direct binding of noncanonical phosphoregulated Gga-binding sites in cargo molecules.

Direct binding of the Kex2p cytosolic tail to the VHS domain of yeast Gga2p facilitates TGN to prevacuolar compartment transport and is regulated by phosphorylation

Human Golgi-localized, γ-ear–containing, ADP-ribosylation factor–binding proteins (Ggas) bind directly to acidic dileucine sorting motifs in the cytosolic tails (C-tails) of intracellular receptors. Despite evidence for a role in recruiting ubiquitinated cargo, it remains unclear whether yeast Ggas also function by binding peptide-sorting signals directly. Two-hybrid analysis shows that the Gga1p and Gga2p Vps27, Hrs, Stam (VHS) domains both bind a site in the Kex2p C-tail and that the Gga2p VHS domain binds a site in the Vps10p C-tail. Binding requires deletion of an apparently autoinhibitory sequence in the Gga2p hinge. Ser780in the Kex2p C-tail is crucial for binding: an Ala substitution blocks but an Asp substitution permits binding. Biochemical assays using purified Gga2p VHS–GGA and TOM1 (GAT) and glutathione S-transferase–Kex2p C-tail fusions show that Gga2p binds directly to the Kex2p C-tail, with relative affinities Asp780> Ser780> Ala780. Affinity-purified antibody against a peptide containing phospho-Ser­780recognizes wild-type Kex2p but not S780A Kex2p, showing that Ser780is phosphorylated in vivo; phosphorylation of Ser780is up-regulated by cell wall–damaging drugs. Finally, mutation of Ser780alters trafficking of Kex2p both in vivo and in cell-free trans-Golgi network (TGN)–prevacuolar compartment (PVC) transport. Thus yeast Gga adaptors facilitate TGN–PVC transport by direct binding of noncanonical phosphoregulated Gga-binding sites in cargo molecules.

Architecture and biosynthesis of the Saccharomyces cerevisiae cell wall

The wall gives a Saccharomyces cerevisiae cell its osmotic integrity; defines cell shape during budding growth, mating, sporulation, and pseudohypha formation; and presents adhesive glycoproteins to other yeast cells. The wall consists of β1,3- and β1,6-glucans, a small amount of chitin, and many different proteins that may bear N- and O-linked glycans and a glycolipid anchor. These components become cross-linked in various ways to form higher-order complexes. Wall composition and degree of cross-linking vary during growth and development and change in response to cell wall stress. This article reviews wall biogenesis in vegetative cells, covering the structure of wall components and how they are cross-linked; the biosynthesis of N- and O-linked glycans, glycosylphosphatidylinositol membrane anchors, β1,3- and β1,6-linked glucans, and chitin; the reactions that cross-link wall components; and the possible functions of enzymatic and nonenzymatic cell wall proteins.

Inhibition assay of yeast cell walls by plasmon resonance Rayleigh scattering and surface-enhanced Raman scattering imaging

We report on plasmon resonance Rayleigh scattering (PRRS) and surface enhanced Raman scattering (SERS) imaging for inhibition assay of yeast cell walls. This assay reveals that the proteins having alkali sensitive linkage bound to β1,3 glucan frameworks in cell walls are involved in SERS activity. The result is further confirmed by comparison of genetically modified cells and wild type cells. Finally, we find that PRRS and SERS spots do not appear on cell walls when daughter cells are enough smaller than parent ones, but appear when size of daughter cells are comparable to parent cells. This finding indicates the relationship between expression of the proteins that generate SERS spots and cell division. These results demonstrate that PRRS and SERS imaging can be a convenient and sensitive method for analysis of cell walls.

Disentangling signaling gradients generated by equivalent sources

Yeast cells approach a mating partner by polarizing along a gradient of mating pheromones that are secreted by cells of the opposite mating type. The Bar1 protease is secreted by a-cells and, paradoxically, degrades the α-factor pheromones which are produced by cells of the opposite mating type and trigger mating in a-cells. This degradation may assist in the recovery from pheromone signaling but has also been shown to play a positive role in mating. Previous studies suggested that widely diffusing protease can bias the pheromone gradient towards the closest secreting cell. Here, we show that restricting the Bar1 protease to the secreting cell itself, preventing its wide diffusion, facilitates discrimination between equivalent mating partners. This may be mostly relevant during spore germination, where most mating events occur in nature.

Unexpected role for a serine/threonine-rich domain in the Candida albicans Iff protein family

Glycosylphosphatidylinositol (GPI)-anchored proteins are an important class of cell wall proteins in Candida albicans because of their localization and their function, even if more than half of them have no characterized homolog in the databases. In this study, we focused on the IFF protein family, investigating their exposure on the cell surface and the sequences that determine their subcellular localization. Protein localization and surface exposure were monitored by the addition of a V5 tag on all members of the family. The data obtained using the complete proteins showed for Iff3 (or -9), Iff5, Iff6, and Iff8 a covalent linkage to the β-1,6-glucan network but, remarkably, showed that Iff2/Hyr3 was linked through disulfide bridges or NaOH-labile bonds. However, since some proteins of the Iff family were undetectable, we designed chimeric constructions using the last 60 amino acids of these proteins to test the localization signal. These constructions showed a β-1,6-glucan linkage for Iff1/Rbr3, Iff2/Hyr3, Iff4 and Iff7/Hyr4 C-terminal-Iff5 fusion proteins, and a membrane localization for the Iff10/Flo9 C terminus-Iff5 fusion protein. Immunofluorescence analyses coupled to these cell fraction data confirmed the importance of the length of the central serine/threonine-rich region for cell surface exposure. Further analysis of the Iff2/Hyr3 linkage to the cell surface showed for the first time that a serine/threonine central region of a GPI-anchored protein may be responsible for the disulfide and the NaOH bonds to the glucan and glycoproteins network and may also override the signal of the proximal ω site region.

Efficient expression of a Paenibacillus barcinonensis endoglucanase in Saccharomyces cerevisiae

The endoglucanase coded by celA (GenBank Access No. Y12512) from Paenibacillus barcinonensis, an enzyme with good characteristics for application on paper manufacture from agricultural fibers, was expressed in Saccharomyces cerevisiae by using different domains of the cell wall protein Pir4 as translational fusion partners, to achieve either secretion or cell wall retention of the recombinant enzyme. Given the presence of five potential N-glycosylation sites in the amino acid sequence coded by celA, the effect of glycosylation on the enzymatic activity of the recombinant enzyme was investigated by expressing the recombinant fusion proteins in both, standard and glycosylation-deficient strains of S. cerevisiae. Correct targeting of the recombinant fusion proteins was confirmed by Western immunoblot using Pir-specific antibodies, while enzymatic activity on carboxymethyl cellulose was demonstrated on plate assays, zymographic analysis and colorimetric assays. Hyperglycosylation of the enzyme when expressed in the standard strain of S. cerevisiae did not affect activity, and values of 1.2 U/ml were obtained in growth medium supernatants in ordinary batch cultures after 24 h. These values compare quite favorably with those described for other recombinant endoglucanases expressed in S. cerevisiae. This is one of the few reports describing the expression of Bacillus cellulases in S. cerevisiae, since yeast expressed recombinant cellulases have been mostly of fungal origin. It is also the first report of the yeast expression of this particular endoglucanase.

Chemical gradients and chemotropism in yeast

Chemical gradients of peptide mating pheromones are necessary for directional growth, which is critical for yeast mating. These gradients are generated by cell-type specific secretion or export and specific degradation in receiving cells. Spatial information is sensed by dedicated seven-transmembrane G-protein coupled receptors and yeast cells are able to detect extremely small differences in ligand concentration across their approximately 5-microm cell surface. Here, I will discuss our current knowledge of how cells detect and respond to such shallow chemical gradients and in particular what is known about the proteins that are involved in directional growth and the establishment of the polarity axis during yeast mating.

Detailed simulations of cell biology with Smoldyn 2.1

Most cellular processes depend on intracellular locations and random collisions of individual protein molecules. To model these processes, we developed algorithms to simulate the diffusion, membrane interactions, and reactions of individual molecules, and implemented these in the Smoldyn program. Compared to the popular MCell and ChemCell simulators, we found that Smoldyn was in many cases more accurate, more computationally efficient, and easier to use. Using Smoldyn, we modeled pheromone response system signaling among yeast cells of opposite mating type. This model showed that secreted Bar1 protease might help a cell identify the fittest mating partner by sharpening the pheromone concentration gradient. This model involved about 200,000 protein molecules, about 7000 cubic microns of volume, and about 75 minutes of simulated time; it took about 10 hours to run. Over the next several years, as faster computers become available, Smoldyn will allow researchers to model and explore systems the size of entire bacterial and smaller eukaryotic cells.

Performance of the auxotrophic Saccharomyces cerevisiae BY4741 as host for the production of IL-1beta in aerated fed-batch reactor: role of ACA supplementation, strain viability, and maintenance energy

Background

Saccharomyces cerevisiae BY4741 is an auxotrophic commonly used strain. In this work it has been used as host for the expression and secretion of human interleukin-1β (IL1β), using the cell wall protein Pir4 as fusion partner. To achieve high cell density and, consequently, high product yield, BY4741 [PIR4-IL1β] was cultured in an aerated fed-batch reactor, using a defined mineral medium supplemented with casamino acids as ACA (auxotrophy-complementing amino acid) source. Also the S. cerevisiae mutant BY4741 Δyca1 [PIR4-IL1β], carrying the deletion of the YCA1 gene coding for a caspase-like protein involved in the apoptotic response, was cultured in aerated fed-batch reactor and compared to the parental strain, to test the effect of this mutation on strain robustness. Viability of the producer strains was examined during the runs and a mathematical model, which took into consideration the viable biomass present in the reactor and the glucose consumption for both growth and maintenance, was developed to describe and explain the time-course evolution of the process for both, the BY4741 parental and the BY4741 Δyca1 mutant strain.

Results

Our results show that the concentrations of ACA in the feeding solution, corresponding to those routinely used in the literature, are limiting for the growth of S. cerevisiae BY4741 [PIR4-IL1β] in fed-batch reactor. Even in the presence of a proper ACA supplementation, S. cerevisiae BY4741 [PIR4-IL1β] did not achieve a high cell density. The Δyca1 deletion did not have a beneficial effect on the overall performance of the strain, but it had a clear effect on its viability, which was not impaired during fed-batch operations, as shown by the k_d value (0.0045 h^-1), negligible if compared to that of the parental strain (0.028 h^-1). However, independently of their robustness, both the parental and the Δyca1 mutant ceased to grow early during fed-batch runs, both strains using most of the available carbon source for maintenance, rather than for further proliferation. The mathematical model used evidenced that the energy demand for maintenance was even higher in the case of the Δyca1 mutant, accounting for the growth arrest observed despite the fact that cell viability remained comparatively high.

Conclusions

The paper points out the relevance of a proper ACA formulation for the outcome of a fed-batch reactor growth carried out with S. cerevisiae BY4741 [PIR4-IL1β] strain and shows the sensitivity of this commonly used auxotrophic strain to aerated fed-batch operations. A Δyca1 disruption was able to reduce the loss of viability, but not to improve the overall performance of the process. A mathematical model has been developed that is able to describe the behaviour of both the parental and mutant producer strain during fed-batch runs, and evidence the role played by the energy demand for maintenance in the outcome of the process.

Role of the cell wall integrity and filamentous growth mitogen-activated protein kinase pathways in cell wall remodeling during filamentous growth

Many fungal species including pathogens exhibit filamentous growth (FG) as a means of foraging for nutrients. Genetic screens were performed to identify genes required for FG in the budding yeast Saccharomyces cerevisiae. Genes encoding proteins with established functions in transcriptional activation (MCM1, MATalpha2, PHD1, MSN2, SIR4, and HMS2), cell wall integrity (MPT5, WSC2, and MID2), and cell polarity (BUD5) were identified as potential regulators of FG. The transcription factors MCM1 and MATalpha2 induced invasive growth by promoting diploid-specific bipolar budding in haploid cells. Components of the cell wall integrity pathway including the cell surface proteins Slg1p/Wsc1p, Wsc2p, Mid2p, and the mitogen-activated protein kinase (MAPK) Slt2p/Mpk1p contributed to multiple aspects of the FG response including cell elongation, cell-cell adherence, and agar invasion. Mid2p and Wsc2p stimulated the FG MAPK pathway through the signaling mucin Msb2p and components of the MAPK cascade. The FG pathway contributed to cell wall integrity in parallel with the cell wall integrity pathway and in opposition with the high osmolarity glycerol response pathway. Mass spectrometry approaches identified components of the filamentous cell wall including the mucin-like proteins Msb2p, Flo11p, and subtelomeric (silenced) mucin Flo10p. Secretion of Msb2p, which occurs as part of the maturation of the protein, was inhibited by the ss-1,3-glucan layer of the cell wall, which highlights a new regulatory aspect to cell wall remodeling in this organism. Disruption of ss-1,3-glucan linkages induced mucin shedding and resulted in defects in cell-cell adhesion and invasion of cells into the agar matrix.

Robust spatial sensing of mating pheromone gradients by yeast cells

Projecting or moving up a chemical gradient is a universal behavior of living organisms. We tested the ability of S. cerevisiaea-cells to sense and respond to spatial gradients of the mating pheromone α-factor produced in a microfluidics chamber; the focus was on bar1Δ strains, which do not degrade the pheromone input. The yeast cells exhibited good accuracy with the mating projection typically pointing in the correct direction up the gradient (∼80% under certain conditions), excellent sensitivity to shallow gradients, and broad dynamic range so that gradient-sensing was relatively robust over a 1000-fold range of average α-factor concentrations. Optimal directional sensing occurred at lower concentrations (5 nM) close to the K_d of the receptor and with steeper gradient slopes. Pheromone supersensitive mutations (sst2Δ and ste2^300Δ) that disrupt the down-regulation of heterotrimeric G-protein signaling caused defects in both sensing and response. Interestingly, yeast cells employed adaptive mechanisms to increase the robustness of the process including filamentous growth (i.e. directional distal budding) up the gradient at low pheromone concentrations, bending of the projection to be more aligned with the gradient, and forming a more accurate second projection when the first projection was in the wrong direction. Finally, the cells were able to amplify a shallow external gradient signal of α-factor to produce a dramatic polarization of signaling proteins at the front of the cell. Mathematical modeling revealed insights into the mechanism of this amplification and how the supersensitive mutants can disrupt accurate polarization. Together, these data help to specify and elucidate the abilities of yeast cells to sense and respond to spatial gradients of pheromone.

Efficient secretion of Bacillus subtilis lipase A in Saccharomyces cerevisiae by translational fusion to the Pir4 cell wall protein

Both the secretion and the cell surface display of Bacillus subtilis lipase A (Lip A) in Saccharomyces cerevisiae was investigated using different domains of the cell wall protein Pir4 as translational fusion partners. LipA gene minus its leader peptide was fused inframe in two places of PIR4 to achieve cell wall targeting, or substituting most of the PIR4 sequence, after the signal peptide and the Kex2 processed subunit I of Pir4 to achieve secretion to the growth medium. Expression of the recombinant fusion proteins was investigated in a standard and a glycosylation-deficient strain of S. cerevisiae, grown in selective or rich medium. Fusion proteins intended to be retained at the cell wall were secreted to the growth medium, most likely as result of the degradation of the Pir4 moiety containing the cell wall retention domain, giving low levels of lipase activity. However, the fusion intended for secretion was efficiently secreted in a percentage of close to 90% and remained stable even in rich medium at high cell density cultures, yielding values of over 400 IU of lipase activity per milliliter of cell supernatant. This is, to our knowledge, the first report of the efficient production, as a secreted protein, of lipase A of B. subtilis in baker's yeast.

Cwp2p, the plasma membrane receptor for Pichia membranifaciens killer toxin

PMKT is a channel-forming killer toxin secreted by Pichia membranifaciens. To identify novel genes that mediate cellular resistance to PMKT we screened a collection of 288 deletion mutants. We found 29 open reading frames (ORFs) that, when deleted, confer resistance to PMKT. In addition, the deletion of 15 ORFs was observed to increase protoplast resistance, in agreement with the initial assumption that a plasma membrane receptor for PMKT exists. Whole cells and protoplasts of a cwp2Delta mutant were found to be completely resistant to PMKT and were unable to bind PMKT, indicating that Cwp2p interacts with it. A protein with a molecular mass of 11.7 kDa was purified from PMKT-affinity columns. This protein was sequenced and identified as Cwp2p. Glycosylphosphatidylinositol (GPI) anchoring-defective mutants were much less sensitive to PMKT, as were wild-type protoplasts pretreated with phosphatidylinositol-specific phospholipase C to remove GPI-anchored proteins, indicating that the GPI-anchored precursor of Cwp2p is also necessary for PMKT activity. Carboxyfluorescein-entrapped liposomes containing a purified GFP-Cwp2p fusion protein in their membranes were much more sensitive to PMKT than protein-free liposomes. Cwp2p and its GPI-anchored precursor are proposed for the first time to be involved as PMKT secondary receptors.

Extraction of cell surface-associated proteins from living yeast cells

To extract cell surface-associated proteins from living fungal cells, reducing agents such as beta-mercaptoethanol and dithiothreitol are often used. We show here that both compounds are moderately lipophilic and may perturb the plasma membrane, thus causing the release of cytosolic proteins, especially at high extraction temperatures. To avoid artifacts, we recommend using (a) a low concentration of the reducing agent for only a short period of time, and (b) an extraction temperature of 4 degrees C to protect the integrity of the plasma membrane. Similarly, biotinylation of cell surface proteins should be carried out at low temperatures in the absence of dimethylsulphoxide.

Cell wall assembly in Saccharomyces cerevisiae

An extracellular matrix composed of a layered meshwork of beta-glucans, chitin, and mannoproteins encapsulates cells of the yeast Saccharomyces cerevisiae. This organelle determines cellular morphology and plays a critical role in maintaining cell integrity during cell growth and division, under stress conditions, upon cell fusion in mating, and in the durable ascospore cell wall. Here we assess recent progress in understanding the molecular biology and biochemistry of cell wall synthesis and its remodeling in S. cerevisiae. We then review the regulatory dynamics of cell wall assembly, an area where functional genomics offers new insights into the integration of cell wall growth and morphogenesis with a polarized secretory system that is under cell cycle and cell type program controls.

Role of cell cycle-regulated expression in the localized incorporation of cell wall proteins in yeast

The yeast cell wall is an essential organelle that protects the cell from mechanical damage and antimicrobial peptides, participates in cell recognition and adhesion, and is important for the generation and maintenance of normal cell shape. We studied the localization of three covalently bound cell wall proteins in Saccharomyces cerevisiae. Tip1p was found only in mother cells, whereas Cwp2p was incorporated in small-to-medium-sized buds. When the promoter regions of TIP1 and CWP2 (responsible for transcription in early G1 and S/G2 phases, respectively) were exchanged, the localization patterns of Tip1p and Cwp2p were reversed, indicating that the localization of cell wall proteins can be completely determined by the timing of transcription during the cell cycle. The third protein, Cwp1p, was incorporated into the birth scar, where it remained for several generations. However, we could not detect any role of Cwp1p in strengthening the birth scar wall or any functional interaction with the proteins that mark the birth scar pole as a potential future budding site. Promoter-exchange experiments showed that expression in S/G2 phase is necessary but not sufficient for the normal localization of Cwp1p. Studies of mutants in which septum formation is perturbed indicate that the normal asymmetric localization of Cwp1p also depends on the normal timing of septum formation, composition of the septum, or both.

Pir Proteins of Saccharomyces cerevisiae Are Attached to β-1,3-Glucan by a New Protein-Carbohydrate Linkage

A family of covalently linked cell wall proteins of Saccharomyces cerevisiae, called Pir proteins, are characterized by up to 10 conserved repeating units. Ccw5/Pir4p contains only one complete repeating sequence and its deletion caused a release of the protein into the medium. The exchange of each of three glutamines (Gln69, Gln74, Gln76) as well as one aspartic acid (Asp72) within the repeating unit leads to a loss of the protein from the cell wall. Amino acid sequencing revealed that only Gln74 is modified. Release of the protein with mild alkali, changed Gln74 to to glutamic acid, suggesting that Gln74 is involved in the linkage. Analysis by mass spectrometry showed that 5 hexoses are attached to Gln/Glu74. Sugar analysis revealed glucose as the only constituent. It is suggested that Pir proteins form novel, alkali labile ester linkages between the gamma-carboxyl group of glutamic acids, arising from specific glutamines, with hydroxyl groups of glucoses of beta-1,3-glucan chains. This transglutaminase-type reaction could take place extracellularly and would energetically proceed on the account of amido group elimination.

Comparison of cell wall localization among Pir family proteins and functional dissection of the region required for cell wall binding and bud scar recruitment of Pir1p

We examined the localization of the Pir protein family (Pir1 to Pir4), which is covalently linked to the cell wall in an unknown manner. In contrast to the other Pir proteins, a fusion of Pir1p and monomeric red fluorescent protein distributed in clusters in pir1Delta cells throughout the period of cultivation, indicating that Pir1p is localized in bud scars. Further microscopic analysis revealed that Pir1p is expressed inside the chitin rings of the bud scars. Stepwise deletion of the eight units of the repetitive sequence of Pir1p revealed that one unit is enough for the protein to bind bud scars and that the extent of binding of Pir1p to the cell wall depends on the number of these repetitive units. The localization of a chimeric Pir1p in which the repetitive sequence of Pir1p was replaced with that of Pir4p revealed the functional role of the different protein regions, specifically, that the repetitive sequence is required for binding to the cell wall and that the C-terminal sequence is needed for recruitment to bud scars. This is the first report that bud scars contain proteins like Pir1p as internal components.

Cell wall construction inSaccharomyces cerevisiae

In this review, we discuss new insights in cell wall architecture and cell wall construction in the ascomycetous yeast Saccharomyces cerevisiae. Transcriptional profiling studies combined with biochemical work have provided ample evidence that the cell wall is a highly adaptable organelle. In particular, the protein population that is anchored to the stress-bearing polysaccharides of the cell wall, and forms the interface with the outside world, is highly diverse. This diversity is believed to play an important role in adaptation of the cell to environmental conditions, in growth mode and in survival. Cell wall construction is tightly controlled and strictly coordinated with progression of the cell cycle. This is reflected in the usage of specific cell wall proteins during consecutive phases of the cell cycle and in the recent discovery of a cell wall integrity checkpoint. When the cell is challenged with stress conditions that affect the cell wall, a specific transcriptional response is observed that includes the general stress response, the cell wall integrity pathway and the calcineurin pathway. This salvage mechanism includes increased expression of putative cell wall assemblases and some potential cross-linking cell wall proteins, and crucial changes in cell wall architecture. We discuss some more enzymes involved in cell wall construction and also potential inhibitors of these enzymes. Finally, we use both biochemical and genomic data to infer that the architectural principles used by S. cerevisiae to build its cell wall are also used by many other ascomycetous yeasts and also by some mycelial ascomycetous fungi.

Anchorage of Candida albicans Ssr1 to the cell wall, and transcript profiling of the null mutant

Incorporation into the wall of Candida albicans Ssr1, a GPI-dependent protein, was investigated by construction of different truncated genes for which the three potential omega sites (S199, S215 and G216) and the corresponding omega+1 and omega+2 were eliminated or modified. Cells of the C. albicans ssr1Delta mutant were transformed with pADH-pl harboring the truncated versions of CaSSR1, pADH-DeltaCaSSR1t(217-234) (lacking a C-terminal hydrophobic stretch of 18 aa including the putative omega+2 and omega+1, omega+2 of S215 and G216) or pADH-DeltaCaSSR1t(199-201) (lacking three serine residues), and their walls were analyzed for the protein. Results suggested that the three serine residues are essential for incorporation of CaSsr1 into the wall beta-glucan. This interpretation was confirmed when the truncated protein CaSsr1pt(199-201) was found in the spent medium. The transcription profile of the 6039 genes in C. albicans ssr1Delta showed that seven genes are upregulated (1.4-fold), including SRP54 (a signal recognition particle subunit), IPF29 (a zinc finger protein) and PTR3 (a transcriptional regulator), whereas 27 genes are downregulated (0.7-fold), including IPF6318 (a beta-glucosidase) and SOU1 (a sorbitol utilization protein). Additional genes showed a reduced increase, or decreased expression, suggesting that some current orphan genes may have unknown cell wall functions. In addition, a compensatory mechanism would appear to occur, as a substantial increase in the amount of beta-1,3-glucan (2.34-fold) was detected in the cell wall of the mutant cells.

Use of the cell wall protein Pir4 as a fusion partner for the expression ofBacillussp. BP-7 xylanase A inSaccharomyces cerevisiae

Xylanase A from Bacillus sp. BP7, an enzyme with potential applications in biotechnology, was used to test Pir4, a disulfide bound cell wall protein, as a fusion partner for the expression of recombinant proteins in standard or glycosylation-deficient mnn9 strains of Saccharomyces cerevisiae. Five different constructions were carried out, inserting in-frame the coding sequence of xynA gene in that of PIR4, with or without the loss of specific regions of PIR4. Targeting of the xylanase fusion protein to the cell wall was achieved in two of the five constructions, while secretion to the growth medium was the fate of the gene product of one of the constructions. In all three cases localization of the xylanase fusion proteins was confirmed both by Western blot and detection with Pir-specific antibodies and by xylanase activity determination. The cell wall-targeted fusion proteins could be extracted by reducing agents, showing that the inclusion of a recombinant protein of moderate size does not affect the way Pir4 is attached to the cell wall. Also, the construction that leads to the secretion of the fusion protein permitted us to identify a region of Pir4 responsible for cell wall retention. In summary, we have developed a Pir4-based system that allows selective targeting of an active recombinant enzyme to the cell wall or the growth medium. This system may be of general application for the expression of heterologous proteins in S. cerevisiae for surface display and secretion.

Yeast expression of the VP8* fragment of the rotavirus spike protein and its use as immunogen in mice

The VP8* fragment from the rotavirus spike protein was expressed as a fusion protein with two different cell wall proteins of Saccharomyces cerevisiae, Icwp (Ssr1p) and Pir4, to achieve cell wall targeting or secretion to the growth medium of the fusion proteins. Two different host strains were used for the expression of the fusion proteins, a standard S. cerevisiae strain and a mnn9 glycosylation deficient strain, the later to reduce hyper-glycosylation. The Icwp-VP8* fusion could only be detected in the growth medium, indicating that the presence of the VP8* moiety interferes with the anchorage of Icwp to the cell wall. In the case of the Pir4-VP8* fusion proteins, we achieved cell wall targeting or secretion depending on how the gene fusion had been performed. In all cases, the fusion proteins expressed in the mnn9 strain showed a reduced level of glycosylation. Mice were inoculated intraperitoneally either with Pir4-VP8* or Icwp-VP8* fusion proteins purified from the growth medium of mnn9 strains expressing them or with whole cells of an mnn9 strain expressing a Pir4-VP8 fusion protein on its cell walls. Hundred percent of mice inoculated with the Pir4-VP8* fusion protein and 25% of those inoculated with the Icwp-VP8* fusion protein showed high titers of anti-VP8* antibodies. No specific immune response was detected in those mice inoculated with whole cells. Finally, susceptibility to rotavirus infection of the offspring of immunized dams was determined and protection was found in a percentage of approximately 60% with respect to the control group.

Yeast cells harboring human alpha-1,3-fucosyltransferase at the cell surface engineered using Pir, a cell wall-anchored protein

Human alpha-1,3-fucosyltansferase (FucT) encoded by the FUT6 gene was displayed at the cell surface of yeast cells engineered using the yeast cell wall protein Pir1 or Pir2, and the FucT activity was detected at the surface of cells producing the Pir1-HA-FUT6 or Pir2-FLAG-FUT6 fusion proteins. To obtain higher activity, we engineered the host yeast cells in which endogenous PIR genes of the PIR1-4 gene family were disrupted. Among the disruptants, the pir1Delta pir2Delta pir3Delta strain with the PIR1-HA-FUT6 fusion gene showed the highest FucT activity, which was about three-fold higher than that of the wild-type strain. Furthermore, the co-expression of both the Pir1-HA-FUT6 and the Pir2-FLAG-FUT6 fusions showed an approximately 1.5-fold higher activity than that in the cell wall displaying Pir1-HA-FUT6 alone. The present method was thus effective for producing yeast cells that can easily synthesize various oligosaccharides, such as Le(x) and sLe(x), using Pir-glycosyltransferase fusions in combination with the deletion of endogenous PIR genes.

Characterization of a glycosylphosphatidylinositol-bound cell-wall protein (GPI-CWP) in Yarrowia lipolytica

The structure and composition of the cell wall of yeast has so far been studied mainly in Saccharomyces cerevisiae. It is basically made up of three components: beta-glucans, chitin and mannose-containing glycoproteins, also called mannoproteins. Most covalently bound cell-wall mannoproteins belong to the so-called glycosylphosphatidylinositol cell-wall protein (GPI-CWP) family, cell-wall proteins that are bound through the remnant of a GPI residue to 1,6-beta-glucan. The non-conventional yeast Yarrowia lipolytica shares Generally Regarded As Safe (GRAS) status with S. cerevisiae, has some industrial applications and is increasingly being proposed as a host for the production of recombinant proteins and as a model in the study of dimorphism. However, very little information on cell-wall structure and composition is available for this organism. Here is described the isolation and characterization of YlCWP1, a homologue of the CWP1 gene from S. cerevisiae, which encodes a GPI-CWP, and the identification of its gene product. YlCWP1 encodes a 221 aa protein that contains a putative signal peptide and a putative GPI-attachment site. It shows 28.5 % overall identity with Cwp1 of S. cerevisiae and a hydropathy profile characteristic of GPI-CWPs. Disruption of YlCWP1, both in the wild-type and in an mnn9 glycosylation-deficient background, led to the identification of Ylcwp1 as a 60 kDa polypeptide present in cell-wall extracts. To the authors' knowledge, this is the first report of a GPI-CWP in Y. lipolytica, and it suggests that the cell-wall organization of Y. lipolytica is similar to that of S. cerevisiae.

Overexpression of a cell wall glycoprotein in Fusarium oxysporum increases virulence and resistance to a plant PR-5 protein

Fusarium oxysporum f. sp. nicotianae is a causal agent for vascular wilt disease in tobacco. It is sensitive to osmotin, a tobacco pathogenesis-related protein (PR-5) that is implicated in plant defense against phytopathogenic fungi. We show that osmotin susceptibility of F. oxysporum f. sp. nicotianae was reduced by overexpression of the heterologous cell wall glycoprotein Saccharomyces cerevisiae protein containing inverted repeats (PIR2), a member of the PIR family of fungal cell wall glycoproteins that protect S. cerevisiae from the toxic action of osmotin. S. cerevisiae PIR2 was targeted to the cell wall of F. oxysporum. Disease severity and fungal growth were increased in tobacco seedlings inoculated with F. oxysporum transformed with PIR2 compared to seedlings infected with untransformed F. oxysporum or that transformed with vector, although accumulation of transcript and protein of defense genes was similar. The results show that fungal cell wall components can increase resistance to plant defense proteins and affect virulence.

Functional analysis of the cysteine residues and the repetitive sequence of Saccharomyces cerevisiae Pir4/Cis3: the repetitive sequence is needed for binding to the cell wall beta-1,3-glucan

Identification of PIR/CIS3 gene was carried out by amino-terminal sequencing of a protein band released by beta-mercaptoethanol (beta-ME) from S. cerevisiae mnn9 cell walls. The protein was released also by digestion with beta-1,3-glucanases (laminarinase or zymolyase) or by mild alkaline solutions. Deletion of the two carboxyterminal Cys residues (Cys(214)-12aa-Cys(227)-COOH), reduced but did not eliminate incorporation of Pir4 (protein with internal repeats) by disulphide bridges. Similarly, site-directed mutation of two other cysteine amino acids (Cys(130)Ser or Cys(197)Ser) failed to block incorporation of Pir4; the second mutation produced the appearance of Kex2-unprocessed Pir4. Therefore, it seems that deletion or mutation of individual cysteine molecules does not seem enough to inhibit incorporation of Pir4 by disulphide bridges. In fks1Delta and gsc2/fks2Delta cells, defective in beta-1,3-glucan synthesis, modification of the protein pattern found in the supernatant of the growth medium, as well as the material released by beta-ME or laminarinase, was evident. However, incorporation of Pir4 by both disulphide bridges and to the beta-1,3-glucan of the cell wall continued. Deletion of the repetitive sequence (QIGDGQVQA) resulted in the secretion and incorporation by disulphide bridges of Pir4 in reduced amounts together with substantial quantities of the Kex2-unprocessed Pir4 form. Pir4 failed to be incorporated in alkali-sensitive linkages involving beta-1,3-glucan when the first repetitive sequence was deleted. Therefore, this suggests that this sequence is needed in binding Pir4 to the beta-1,3-glucan.

Identification of cell surface determinants in Candida albicans reveals Tsa1p, a protein differentially localized in the cell

To identify cell surface proteins of Candida albicans, the predominant fungal pathogen in humans, we have established an approach using a membrane impermeable biotin derivative in combination with affinity purification. We were able to identify 29 different proteins under two distinct conditions. Among mannoproteins, heat shock proteins and glycolytic enzymes we found thiol-specific antioxidant-like protein 1 (Tsa1p) to be differentially localized depending on the conditions applied. Only in hyphally grown cells Tsa1p was localized to the cell surface whereas in blastospores no surface but mainly nuclear localization was found. This indicates that cell surface expression of at least some proteins is mediated by differential translocation.

Isolation of the MNN9 gene of Yarrowia lipolytica (YlMNN9) and phenotype analysis of a mutant ylmnn9 Delta strain

In this work we describe the isolation of the Yarrowia lipolytica homologue of Saccharomyces cerevisiae MNN9 gene, which we have named YlMNN9, and the phenotype analysis of a Y. lipolytica strain containing the disrupted YlMNN9 allele. YlMNN9 was cloned using degenerate consensus oligonucleotides to generate specific probes that were in turn used to screen mini-gene libraries. The gene is defined by a 1014 bp ORF predicted to encode a protein 337 amino acids long that shares significant homology with the Mnn9ps of S. cerevisiae, Candida albicans and Hansenula polymorpha, including a putative N-terminal transmembrane domain. Disruption of YlMNN9 leads to phenotypes such as resistance to sodium orthovanadate and sensitivity to hygromycin B, compatible with a glycosylation defect, and hypersensitivity to Calcofluor white, Congo red or zymolyase, characteristic of cell wall defects. Analysis of cell wall proteins present in beta-mercaptoethanol and zymolyase extracts showed significant differences between the parental and the ylmnn9 Delta strain. These results suggest that, as has been the case with the mnn9 strain of S. cerevisiae, the ylmnn9 Delta strain we present in this work, could be used to study the cell wall proteins of Y. lipolytica and how they are organized into the cell wall.

Characterization of a disulphide-bound Pir-cell wall protein (Pir-CWP) of Yarrowia lipolytica

In this work we have studied the disulphide-bound group of cell wall mannoproteins of Yarrowia lipolytica and Candida albicans. In the case of Y. lipolytica, SDS-PAGE analysis of the beta-mercaptoethanol-extracted material from the purified cell walls of the yeast form, showed the presence of a main polypeptide of 45 kDa and some minor bands in the 100-200 kDa range. This pattern of bands is similar to that obtained in identical extracts in Saccharomyces cerevisiae (Moukadiri et al., 1999), and besides, all these bands cross-react with an antibody raised against beta-mercaptoethanol-extracted material from the purified cell walls of S. cerevisiae, suggesting that the 45 kDa band could be the homologue of Pir4 of S. cerevisiae in Y. lipolytica. To confirm this possibility, the amino-terminal sequences of two internal regions of the 45 kDa protein were determined, and degenerate oligonucleotides were used to clone the gene. The gene isolated in this way codes a 286 amino acid polypeptide that shows homology with the Pir family of proteins of S. cerevisiae (Russo et al., 1992; Toh-e et al., 1993), accordingly we have named this gene YlPIR1. Disruption of YlPIR1 led to a slight increase in the resistance of the cells to calcofluor white, Congo red and zymolyase, but did not cause changes in cell morphology, growth rate or morphological transition.

Pkh1 and Pkh2 differentially phosphorylate and activate Ypk1 and Ykr2 and define protein kinase modules required for maintenance of cell wall integrity

Saccharomyces cerevisiae Pkh1 and Pkh2 are functionally redundant homologs of mammalian protein kinase, phosphoinositide-dependent protein kinase-1. They activate two closely related, functionally redundant enzymes, Ypk1 and Ykr2 (homologs of mammalian protein kinase, serum- and glucocorticoid-inducible protein kinase). We found that Ypk1 has a more prominent role than Ykr2 in mediating their shared essential function. Considerable evidence demonstrated that Pkh1 preferentially activates Ypk1, whereas Pkh2 preferentially activates Ykr2. Loss of Pkh1 (but not Pkh2) reduced Ypk1 activity; conversely, Pkh1 overexpression increased Ypk1 activity more than Pkh2 overexpression. Loss of Pkh2 reduced Ykr2 activity; correspondingly, Pkh2 overexpression increased Ykr2 activity more than Pkh1 overexpression. When overexpressed, a catalytically active C-terminal fragment (kinase domain) of Ypk1 was growth inhibitory; loss of Pkh1 (but not Pkh2) alleviated toxicity. Loss of Pkh2 (but not Pkh1) exacerbated the slow growth phenotype of a ypk1Delta strain. This Pkh1-Ypk1 and Pkh2-Ykr2 dichotomy is not absolute because all double mutants (pkh1Delta ypk1Delta, pkh2Delta ypk1Delta, pkh1Delta ykr2Delta, and pkh2Delta ykr2Delta) were viable. Compartmentation contributes to selectivity because Pkh1 and Ypk1 were located exclusively in the cytosol, whereas Pkh2 and Ykr2 entered the nucleus. At restrictive temperature, ypk1-1(ts) ykr2Delta cells lysed rapidly, but not in medium containing osmotic support. Dosage and extragenic suppressors were selected. Overexpression of Exg1 (major exoglucanase), or loss of Kex2 (endoprotease involved in Exg1 processing), rescued growth at high temperature. Viability was also maintained by PKC1 overexpression or an activated allele of the downstream protein kinase (BCK1-20). Conversely, absence of Mpk1 (distal mitogen-activated protein kinase of the PKC1 pathway) was lethal in ypk1-1(ts) ykr2Delta cells. Thus, Pkh1-Ypk1 and Pkh2-Ykr2 function in a novel pathway for cell wall integrity that acts in parallel with the Pkc1-dependent pathway.

Dynamics of cell wall structure in Saccharomyces cerevisiae

The cell wall of Saccharomyces cerevisiae is an elastic structure that provides osmotic and physical protection and determines the shape of the cell. The inner layer of the wall is largely responsible for the mechanical strength of the wall and also provides the attachment sites for the proteins that form the outer layer of the wall. Here we find among others the sexual agglutinins and the flocculins. The outer protein layer also limits the permeability of the cell wall, thus shielding the plasma membrane from attack by foreign enzymes and membrane-perturbing compounds. The main features of the molecular organization of the yeast cell wall are now known. Importantly, the molecular composition and organization of the cell wall may vary considerably. For example, the incorporation of many cell wall proteins is temporally and spatially controlled and depends strongly on environmental conditions. Similarly, the formation of specific cell wall protein-polysaccharide complexes is strongly affected by external conditions. This points to a tight regulation of cell wall construction. Indeed, all five mitogen-activated protein kinase pathways in bakers' yeast affect the cell wall, and additional cell wall-related signaling routes have been identified. Finally, some potential targets for new antifungal compounds related to cell wall construction are discussed.

Evidence for the attachment of Hsp150/Pir2 to the cell wall of Saccharomyces cerevisiae through disulfide bridges

Here we present evidence that Hsp150/Pir2, a member of the Pir family of cell wall proteins, can be extracted from the purified cell walls of Saccharomyces cerevisiae by treatment with beta-mercaptoethanol, demonstrating that at least part of this protein is attached to the cell wall through disulfide bridges. We also present evidence that Pir4, another member of this family, is partly secreted to the growth medium. Finally we propose a hypothesis to explain the relationship between the differently localized forms of particular members of the Pir family of cell wall proteins.