Evaluation of three rapid diagnostic methods for direct identification of microorganisms in positive blood cultures

Comparison of 3 diagnostic platforms for identification of bacteria and yeast from positive blood culture bottles

Managing bloodstream infections requires fast and accurate diagnostics. Culture-based diagnostic methods for identification from positive blood culture require 24-hour subculture, potentially delaying time to appropriate therapy. Positive blood cultures were collected (n = 301) from September 2021 to August 2022 at the University of Maryland Medical Center. Platforms compared were BioFire® BCID2, Sepsityper®, and short-term culture. For monomicrobial cultures, FilmArray® BCID2 identified 88.3% (241/273) of pathogens. Rapid Sepsityper® identified 76.9% (210/273) of pathogens. Sepsityper® extraction identified 82.4% (225/273) of pathogens. Short-term culture identified 83.5% (228/273) of pathogens. For polymicrobial cultures, Sepsityper®, short-term culture, and BioFire® BCID2 had complete identifications at 10.7% (3/28), 0%, and 92.9% (26/28), respectively. Time-to-results for Rapid Sepsityper®, Sepsityper® extraction, BioFire® BCID2, and Short-term culture were 35, 52, 65, and 306 minutes, respectively. Performance of these platforms can reduce time-to-results and may help effectively treat bloodstream infections faster. Accuracy, time-to-result, and hands-on time are important factors when evaluation diagnostic platforms.

CPA-Cas12a-based lateral flow strip for portable assay of Methicillin-resistant Staphylococcus aureus in clinical sample

The rapid and accurate identification of methicillin-resistant Staphylococcus aureus at an early antibiotic therapy stage would be benefit to disease diagnosis and antibiotic selection. Herein, we integrated cross-priming amplification (CPA) and CRISPR/Cas 12a (designated as CPA-Cas 12a) systems to establish a sensitive and efficient lateral flow assay to detect methicillin-resistant Staphylococcus aureus. This assay relies on the CPA isothermal nucleic acid amplification strategy which can amplify the DNA extracted from Staphylococcus aureus and accompanying the indiscriminately trans-cleavage process of Cas 12a/CrRNA duplex after recognizing specific sequence. Taking the advantage of reporter and high turnover Cas 12a activity, a dramatic change in response was achieved to produce a significant increase in the analytical sensitivity. The signal conversion and output were realized using a lateral flow strip to achieve field-deployable detection. Furthermore, this bioassay was accommodated with a microfluidic device to realize automatically portable detection. This proposed assay completed within 30 min with the detection limit of 5 CFU mL^-1, was verified by testing bacterial suspension and 202 clinical samples. Given the high sensitivity, specificity and efficiency, this colorimetric readout assay through strip could be further promoted to the clinical diagnosis, clinical medication of multidrug-resistant bacteria.

A Closer Look at the Laboratory Impact of Utilizing ePlex Blood Culture Identification Panels: a Workflow Analysis Using Rapid Molecular Detection for Positive Blood Cultures

Rapid identification of pathogens is critical in bloodstream infections. We evaluated the diagnostic performance of the GenMark Dx ePlex blood culture identification (BCID) panels and the adoption of the ePlex system into the clinical laboratory workflow. Nonduplicate remnant specimens of positive blood cultures were prospectively tested using ePlex panels between January and March 2020. A total of 313 unique positive blood culture specimens were tested. The identified organisms consisted of 98 Gram-negative rods (GNR), 90 Gram-positive cocci (GPC) in clusters, 62 GPC in chains, 21 Gram-positive rods, and 20 yeasts; 22 organisms were off panel. The positive percent agreement was 100% across all organisms tested after discordancy resolution, while the negative percent agreement was 100% across all targets except Corynebacterium spp., where it was 99.7%. The ePlex BCID panels accurately detected 5 pan targets and 42 antimicrobial resistance gene markers, including 31 mecA, 4 vanA, 6 CTX-M, and 1 KPC gene. The median times to result were calculated as 2.5 h for Xpert MRSA/SA in GPC in clusters, 9.5 h for Accelerate Pheno (identification and susceptibility) in GNR, 6 h for peptide nucleic acid fluorescent in situ hybridization [PNA-FISH] in yeasts, 27 h for the latex agglutination test in S. aureus, 29 h for Lancefield serotyping in GPC in chains, and 29 h for Vitek-MS in GNR. In our laboratory, the ePlex panels could substantially reduce the time to result for bloodstream infection (BSI) caused by Streptococcus spp., Enterococcus spp., and Candida spp. The highly accurate ePlex panels can help streamline laboratory efficiency in the blood bench workflow, reducing the time to result for identification of BSI pathogens. IMPORTANCE Sepsis is a leading cause of morbidity and mortality worldwide. Rapid identification of the causative agent is of critical importance for the prompt initiation of the appropriate antibiotic treatment. In this study, we evaluated the diagnostic performance of the GenMark Dx ePlex blood culture identification (BCID) panels and their adoption into the clinical laboratory workflow. We prospectively tested 313 blood culture isolates and found that ePlex BCID panels had a positive percent agreement of 100% across all organisms tested after discordancy resolution. The negative percent agreement was 100% across all targets except Corynebacterium spp., where it was 99.7%. This new rapid technology (turnaround time of ~90 min) can help streamline laboratory efficiency in the blood bench workflow, reducing the time to result for identification of BSI pathogens. Adoption should be individualized based on the needs of the patient population and capabilities of the laboratory.

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry in the diagnosis of microorganisms

Microbiology culture is the gold standard method for identifying microorganisms. This identification protocol takes several days to complete. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is a technique that can identify different microorganisms quickly and accurately. The objective of this work was to evaluate the use of MALDI-TOF MS in the routine of clinical laboratories to identify microorganisms and to identify their resistance to antimicrobials. This study evaluated the relevance of the MALDI-TOF MS technique for microbiological diagnosis through a literature review. The authors found that MALDI-TOF MS can identify bacteria, fungi, viruses and parasites, even in blood cultures, and also serves to assess antimicrobial resistance. Thus, MALDI-TOF MS can become an indispensable tool in laboratory diagnosis.

Management of Multidrug-Resistant Infections in Cirrhosis

The World Health Organization describes antimicrobial resistance as one of the biggest threats to global health, food security, and development with indiscriminate use of antimicrobials globally driving the emergence of multidrug-resistant bacteria, resistant to 60% of antimicrobials in some countries. Infections with multidrug-resistant organisms (MDROs) have increased in recent decades in patients with cirrhosis, who are frequently prescribed antibiotics, regularly undergo invasive procedures such as large volume paracentesis, and have recurrent hospitalizations, posing a particular risk in this already immunocompromised cohort of patients. In this review, we explore mechanisms underlying this vulnerability to MDRO infection; the effect of bacterial infections on disease course in cirrhosis; prevalence of MDROs in patients with cirrhosis; outcomes following MDRO infection; fungal infections; antibiotics and their efficacy; and management of MDRO infections in terms of detection, antimicrobial and nonantimicrobial treatments, prophylaxis, antibiotic stewardship, the gut microbiome, and technological interventions.

Metabolic preference assay for rapid diagnosis of bloodstream infections

Bloodstream infections (BSIs) cause >500,000 infections and >80,000 deaths per year in North America. The length of time between the onset of symptoms and administration of appropriate antimicrobials is directly linked to mortality rates. It currently takes 2–5 days to identify BSI pathogens and measure their susceptibility to antimicrobials – a timeline that directly contributes to preventable deaths. To address this, we demonstrate a rapid metabolic preference assay (MPA) that uses the pattern of metabolic fluxes observed in ex-vivo microbial cultures to identify common pathogens and determine their antimicrobial susceptibility profiles. In a head-to-head race with a leading platform (VITEK 2, BioMérieux) used in diagnostic laboratories, MPA decreases testing timelines from 40 hours to under 20. If put into practice, this assay could reduce septic shock mortality and reduce the use of broad spectrum antibiotics.

It is currently slow to identify bloodstream infection pathogens. Here the authors report a rapid metabolic preference assay that uses the pattern of metabolic fluxes observed in ex-vivo microbial cultures to identify common pathogens and determine their antimicrobial susceptibility profiles.

Classical and Molecular Techniques to Diagnose HAP/VAP

Nosocomial pneumonia, including hospital-acquired pneumonia (HAP) and ventilator-associated pneumonia (VAP), are the most common nosocomial infections occurring in critically ill patients requiring intensive care. However, challenges exist in making a timely and accurate diagnosis of HAP and VAP. Under diagnosis of HAP and VAP can result in greater mortality risk, especially if accompanied by delays in the administration of appropriate antimicrobial treatment. Over diagnosis of HAP and VAP results in the unnecessary administration of broad spectrum antibiotics that can lead to further escalation of antibiotic resistance. Optimal diagnosis and management of HAP and VAP require a systematic approach that combines clinical and radiographic assessments along with proper microbiologic techniques. The use of more invasive sampling methods (bronchoalveolar lavage and protected specimen brush) may enhance specimen collection resulting in more specific diagnoses to limit unnecessary antibiotic exposure. Molecular techniques, currently in use and investigational technique, may improve the diagnosis of HAP and VAP by allowing more rapid identification of offending pathogens, if present, thus increasing both appropriate antibiotic treatment and avoiding unnecessary drug exposure.

Direct microorganism species identification and antimicrobial susceptibility tests from positive blood culture bottles using rapid Sepsityper Kit

INTRODUCTION

We evaluated the performance of Rapid Sepsityper Kit in species identification (ID) and antimicrobial susceptibility testing (AST).

METHODS

Positive blood culture bottles (n = 227) containing single microorganisms were enrolled. We compared the direct method using Rapid Sepsityper Kit for ID and AST with the conventional method. The analyses of ID and AST were performed using MALDI Biotyper and BD Phoenix platform, respectively.

RESULTS

The direct ID method correctly identified 89.4% (203/227) of samples, and Gram-negative bacilli (95.2%) had a higher ID rate than Gram-positive cocci (84.4%). Five cases were misidentified, and non-acceptable identification was high among Streptococcus species. Direct AST results were obtained from 168 isolates. Non-acceptable ID occurred among 24 isolates; 4 Streptococcus species, and 31 isolates, which did not grow in the direct AST method, were excluded. A total of 1714 antibiotic susceptibility tests (625 from 69 Gram-positive cocci and 1089 from 99 Gram-negative bacilli) were performed. The direct AST methods showed 98.3% (1685/1714) of categorical agreement (CA), 0.7% (12/1714) of very major errors, 0.2% (4/1714) of major errors, and 0.8% (13/1714) of minor errors. Complete CA was obtained for methicillin-resistant Staphylococcus aureus and extended-spectrum beta-lactamase-producing Escherichia coli.

CONCLUSIONS

The direct ID method using Rapid Sepsityper Kit and the direct AST method in combination with the BD Phoenix platform, which was associated with a reduction of turnaround time, may be a reliable approach for blood culture bottles. However, additional validation and further improvements, especially for Gram-positive cocci, would have an impact on microbiological diagnoses.

Clinical Utility of Molecular Tests for Guiding Therapeutic Decisions in Bloodstream Staphylococcal Infections: A Meta-Analysis

Background: Treatment of bloodstream staphylococcal infections (BSI) necessitates the prompt initiation of appropriate antimicrobial agents and the rapid de-escalation of excessive broad-spectrum coverage to reduce the risk of mortality. We, therefore, aimed to demonstrate the diagnostic accuracy of nucleic acid amplification tests (NAAT) for the identification of methicillin-resistant S. aureus (MRSA) and methicillin-sensitive S. aureus (MSSA) in clinically suspected patients. Methods: Until November 23, 2020, databases including PubMed, Scopus, Embase, and Web of Science were scanned for eligible studies. A bivariate random-effects model was used for meta-analysis of the 33 included studies obtained from 1606 citations, and pooled summary estimates with 95% confidence intervals (CI) were generated. Results: Twenty-three studies (n = 8,547) assessed NAAT accuracy for MSSA detection, while three studies (n = 479) evaluated MRSA detection in adults. The pooled NAAT sensitivity and specificity for MRSA in adults was higher [sensitivity: 0.83 (95% CI 0.59-0.96), specificity: 0.99 (95% CI 0.98-1.0)] as compared to MSSA [sensitivity: 0.76 (95% CI 0.69-0.82), specificity: 0.98 (95% CI 0.98-0.99)]. Similarly, eight studies (n = 4,089) investigating MSSA in pediatric population reported higher NAAT accuracy [sensitivity: 0.89 (95% CI 0.76-0.96), specificity: 0.98 (95% CI 0.97-0.98)] compared to adults. Among NAA tests, SeptiFast (real-time PCR, commercial) was frequently applied, and its diagnostic accuracy corresponded well to the overall summary estimates. A meta-regression and subgroup analysis of study design, sample condition, and patient selection method could not explain the heterogeneity (P > 0.05) in the diagnostic efficiency. Conclusions: NAAT could be applied as the preferred initial tests for timely diagnosis and BSI management.

Identification and Antibiotic Susceptibility Patterns of Clinical Blood Culture Isolates Not Identified by a Rapid Microarray Diagnostic System

The use of molecular-based diagnostic testing, such as the Luminex Verigene system, to rapidly identify the most common bacterial isolates from blood cultures is an important tool that reduces the duration of inappropriate antibiotics and decreases mortality. However, 5 to 15% of microorganisms recovered from blood culture are unable to be identified by the Verigene Gram-negative (BC-GN) or Gram-positive (BC-GP) assays. In this retrospective, observational study, we evaluate the identities and antimicrobial susceptibility patterns of 229 isolates that were not identified by either the Verigene BC-GN or BC-GP assay. The results presented here suggest that important, clinically relevant information about antimicrobial susceptibility patterns can still be inferred even when isolates are not identified by Verigene. We also examined changes in antibiotic use for patients with “unidentified” Verigene results at our institution and found that this subgroup represents an opportunity to optimize empirical antibiotic therapy.

IMPORTANCE Rapid diagnostic testing to identify bloodstream pathogens has arisen as an important tool both to ensure adequate antimicrobial therapy is given early and to aid in antimicrobial stewardship by allowing for more rapid deescalation of inappropriate antimicrobial therapy. However, there is a paucity of data regarding the significance of isolates that are not able to be identified by rapid diagnostic testing. In this study, we report the identification to the species level and antimicrobial susceptibilities among isolates that were not identified by one such rapid diagnostic platform, the Verigene system. This study provides important insight into how a strong understanding of the strengths and limitations of a given rapid diagnostic platform, coupled with insight into local antibiotic susceptibility patterns, can allow for more nuanced and thoughtful empirical antibiotic selection.

Chondroprotective effects of purple corn anthocyanins on advanced glycation end products induction through suppression of NF-κB and MAPK signaling

Formation of advanced glycation end products (AGEs), which are associated with diabetes mellitus, contributes to prominent features of osteoarthritis, i.e., inflammation-mediated destruction of articular cartilage. Among the phytochemicals which play a role in anti-inflammatory effects, anthocyanins have also been demonstrated to have anti-diabetic properties. Purple corn is a source of three major anthocyanins: cyanidin-3-O-glucoside, pelargonidin-3-O-glucoside and peonidin-3-O-glucoside. Purple corn anthocyanins have been demonstrated to be involved in the reduction of diabetes-associated inflammation, suggesting that they may have a beneficial effect on diabetes-mediated inflammation of cartilage. This investigation of the chondroprotective effects of purple corn extract on cartilage degradation found a reduction in glycosaminoglycans released from AGEs induced cartilage explants, corresponding with diminishing of uronic acid loss of the cartilage matrix. Investigation of the molecular mechanisms in human articular chondrocytes showed the anti-inflammatory effect of purple corn anthocyanins and the metabolite, protocatechuic acid (PCA) on AGEs induced human articular chondrocytes via inactivation of the NFκb and MAPK signaling pathways. This finding suggests that purple corn anthocyanins and PCA may help ameliorate AGEs mediated inflammation and diabetes-mediated cartilage degradation.

Identification of microorganisms directly from blood culture bottles with polymicrobial growth: comparison of FilmArray and direct MALDI-TOF MS

Bloodstream infections (BSIs) are related to high mortality and morbidity. Rapid administration of effective antimicrobial treatment is crucial for patient survival. Recently developed rapid methods to identify pathogens directly from blood culture bottles speed up diagnosis of BSIs. The present study compares the performance of two rapid identification methods, FilmArray and direct MALDI-TOF MS, on identifying microorganisms directly from positive blood culture bottles with polymicrobial growth. FilmArray and direct MALDI-TOF MS were performed directly on positive clinical and simulated polymicrobial blood culture bottles. Assay results were compared with standard culture methods. In total, 110 polymicrobial blood culture samples, of which 96 samples contained two microorganisms while 14 samples contained three microorganisms, were studied. FilmArray was able to identify 215/234 (92.0%) of isolates detected by the standard culture method and successfully identified all microorganisms in 88/110 (80.0%) of blood culture bottles. In contrast, direct MALDI-TOF MS was only able to identify 65/234 (27.8%) of isolates and managed to identify all microoganisms in 2/110 (2.1%) of blood culture bottles. FilmArray is a rapid method for direct identification of polymicrobial blood culture samples that can complement the conventional identification methods. Direct MALDI-TOF MS has low performance with polymicrobial samples.

Evaluation of Rapid Sepsityper® protocol and specific MBT-Sepsityper module (Bruker Daltonics) for the rapid diagnosis of bacteremia and fungemia by MALDI-TOF-MS

During bloodstream infections, rapid adaptation of empirical treatment according to the microorganism identified is essential to decrease mortality. The aim of the present study was to assess the microbiological performances of a new rapid version of the Sepsityper® kit (Bruker Daltonics) allowing identification of bacteria and yeast by MALDI-TOF mass spectrometry directly from positive blood cultures in 10 min and of the specific MBT-Sepsityper module for spectra analysis, designed to increase identification performance. Identification rates were determined prospectively on 350 bacterial and 29 fungal positive blood cultures, and compared to conventional diagnostic method. Our rapid diagnosis strategy (Rapid Sepsityper® protocol: one spot with and one without formic acid extraction step) combined to MBT-Sepsityper module provided 65.4%, 78.9% and 62% reliable identification to the species level of monomicrobial positive blood cultures growing respectively Gram-positive, Gram-negative bacteria or yeast. Importantly, identification rates of Gram-positive bacteria were higher in anaerobic than in aerobic bottles (77.8% vs 22.2%; p = 0.004), if formic acid extraction step was performed (60.8% vs 39.2%; p = 1.8e⁻⁶) and if specific MBT-Sepsityper module was used (76.2% vs 61.9%, p = 0.041) while no significant differences were observed for Gram-negative bacteria. For yeasts identification, formic acid extraction step improved rapid identification rate by 37.9% while the specific MBT-Sepsityper module increased overall performances by 38%, providing up to 89.7% reliable identification if associated with the standard Sepsityper® protocol. These performances, associated with a reduce turnaround time, may help to implement a rapid identification strategy of bloodstream infections in the routine workflow of microbiology laboratories.

Sensitive Detection of Broad-Spectrum Bacteria with Small-Molecule Fluorescent Excimer Chemosensors

Antibiotic resistance is a major problem for world health, triggered by the unnecessary usage of broad-spectrum antibiotics on purportedly infected patients. Current clinical standards require lengthy protocols for the detection of bacterial species in sterile physiological fluids. In this work, a class of small-molecule fluorescent chemosensors termed ProxyPhos was shown to be capable of rapid, sensitive, and facile detection of broad-spectrum bacteria. The sensors act via a turn-on fluorescent excimer mechanism, where close-proximity binding of multiple sensor units amplifies a red shift emission signal. ProxyPhos sensors were able to detect down to 10 CFUs of model strains by flow cytometry assays and showed selectivity over mammalian cells in a bacterial coculture through fluorescence microscopy. The studies reveal that the zinc(II)-chelates cyclen and cyclam are novel and effective binding units for the detection of both Gram-negative and Gram-positive bacterial strains. Mode of action studies revealed that the chemosensors detect Gram-negative and Gram-positive strains with two distinct mechanisms. Preliminary studies applying ProxyPhos sensors to sterile physiological fluids (cerebrospinal fluid) in flow cytometry assays were successful. The results suggest that ProxyPhos sensors can be developed as a rapid, inexpensive, and robust tool for the "yes-no" detection of broad-spectrum bacteria in sterile fluids.

Updates on Rapid Diagnostic Tests in Infectious Diseases

In the last two decades there have been dramatic advances in development of rapid diagnostic tests. Turnaround time of the assays have significantly been shortened which led to reductions in time to appropriate antimicrobial therapy and improvement of patient clinical outcomes. Molecular-based assays generally have better sensitivity than conventional methods, but the cost is higher. The results need to be interpreted cautiously as detection of colonized organisms, pathogen detection in asymptomatic patients, and false negative/positive can occur. Indications and cost-effectiveness need to be considered for appropriate utilization of rapid diagnostic tests.

Rapid multiplex detection of the resistance genes mecA, vanA and vanB from Gram-positive cocci-positive blood cultures using a PCR-dipstick technique

Introduction. Among the causative agents of bloodstream infections (BSIs), methicillin-resistant Staphylococcus aureus (MRSA) or vancomycin-resistant Enterococcus (VRE) are the key causative pathogens. Their rapid detection directly from Gram-positive cocci-positive blood culture specimens will promote timely treatment and help to implement effective infection control measures.Aim. We aim to develop a PCR-dipstick technique for the rapid detection of MRSA and VRE directly from positive blood culture specimens.Methodology. PCR-dipstick is a PCR-based multiplex detection technique where DNA-DNA hybridization is employed, and the results are interpreted with the naked eye. It was designed to target three drug resistance genes: mecA in MRSA and vanA/vanB in VRE from positive blood culture specimens. A total of 120 clinical isolates were used to evaluate the sensitivity and specificity of PCR-dipstick. Then, PCR-dipstick was examined for MRSA and VRE detection directly from positive blood cultures.Results. PCR-dipstick showed 100 % sensitivity and specificity in detecting mecA, vanA and vanB genes directly from bacterial colonies in comparison with multiplex PCR for genomic DNA followed by agarose gel electrophoresis. Further, it could differentially detect multiple resistant genes in pooled bacterial colonies (n=10). Ultimately, PCR-dipstick could detect MRSA and VRE in positive blood cultures in ~3 h.Conclusion. The results of the current study substantiate that PCR-dipstick can be used as an efficient detection system for MRSA and VRE directly from Gram-positive cocci-positive blood cultures. Its affordability and rapidity indicate that PCR-dipstick can be an effective tool for controlling nosocomial pathogens.

A new culture-based method for rapid identification of microorganisms in polymicrobial blood cultures by MALDI-TOF MS

Background

The application of matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry (MS) to microbial identification has allowed the development of rapid methods for identification of microorganisms directly in positive, blood cultures (BCs). These methods can yield accurate results for monomicrobial BCs, but often fail to identify multiple microorganisms in polymicrobial BCs. The present study was aimed at establishing a rapid and simple method for identification of bacteria and yeast in polymicrobial BCs from patients with bloodstream infection.

Results

The rapid method herein proposed is based on short-term culture in liquid media allowing selective growth of microorganisms recovered from polymicrobial BCs, followed by rapid identification by MALDI-TOF MS. To evaluate the accuracy of this method, 56 polymicrobial BCs were comparatively analyzed with the rapid and routine methods. The results showed concordant identification for both microbial species in 43/50 (86%) BCs containing two different microorganisms, and for two microbial species in six BCs containing more than two different species. Overall, 102/119 (85.7%) microorganisms were concordantly identified by the rapid and routine methods using a cut-off value of 1.700 for valid identification. The mean time to identification after BC positivity was about 4.2 h for streptococci/enterococci, 8.7 h for staphylococci, 11.1 h for Gram-negative bacteria, and 14.4 h for yeast, allowing a significant time saving compared to the routine method.

Conclusions

The proposed method allowed rapid and reliable microbial identification in polymicrobial BCs, and could provide clinicians with timely, useful information to streamline empirical antimicrobial therapy in critically ill patients.

Peritonitis from Anaerobic Gram-positive Cocci Likely Due to Translocation of Bacteria from Gut in a Patient Undergoing Peritoneal Dialysis

Peritonitis is a severe complication encountered in patients undergoing peritoneal dialysis, often causing high morbidity and mortality. High vigilance is required from healthcare providers involved in the management of these patients to prevent this complication. There has been recognition of peritonitis caused by unusual organisms because of improved microbiological detection techniques. Gram-positive organisms are the frequent cause of peritonitis compared to Gram-negative organisms. We report a rare case of peritonitis caused by Enterococcus avium. A 60-year-old male on peritoneal dialysis presented with palpitations, abdominal pain, diarrhea, and cloudy effluent. The peritoneal fluid analysis was consistent with peritonitis, and peritoneal fluid culture grew E. avium. The patient was treated with linezolid after failing to respond to vancomycin. The peritoneal dialysis catheter was removed, and the dialysis modality has been switched to hemodialysis because of refractory peritonitis.

Identification and antimicrobial susceptibility testing of Gram-positive and Gram-negative bacteria from positive blood cultures using the Accelerate Pheno™ system

Rapid identification and antimicrobial susceptibility testing remain a crucial step for early efficient therapy of bloodstream infections. Traditional methods require turnaround times of at least 2 days, while rapid procedures are often associated with extended hands-on time. The Accelerate Pheno™ System provides microbial identification results within 90 min and susceptibility data in approximately 7 h directly from positive blood cultures with only few minutes of hands-on time. The aim of this study was, therefore, to evaluate the performance of the Accelerate Pheno™ System in identification and antimicrobial susceptibility testing of both Gram-positive and Gram-negative bacteria directly from clinical blood culture samples. We analyzed 108 and 67 blood culture bottles using the Accelerate PhenoTest™ BC kit with software version v1.0 and the FDA-cleared version v1.2, respectively. Reliable identification was achieved for Enterobacteriaceae, staphylococci, and enterococci, with 76/80 (95%), 42/46 (91%), and 10/11 (91%) correct identifications. Limitations were observed in the identification of streptococci, including Streptococcus pneumoniae and Streptococcus pyogenes, and coagulase-negative staphylococci. Antimicrobial susceptibility results for Enterobacteriaceae, for amikacin, ertapenem, ciprofloxacin, gentamicin, meropenem, and piperacillin-tazobactam ranged between 86 and 100% categorical agreement. Using v1.2, results for ceftazidime showed 100% concordance with the reference method. For staphylococci, the overall performance reached 92% using v1.2. Qualitative tests for detection of methicillin or macrolide-lincosamide-streptogramin B (MLSB) resistance caused major and very major errors for isolates. Overall, the present data show that the Accelerate Pheno™ system can, in combination with Gram stain, be used as a rapid complementation to standard microbial diagnosis of bloodstream infections.

The Role of Antibiotic Stewardship in Promoting Appropriate Antibiotic Use

Antibiotics are one of the most significant medical discoveries in human history. The widespread use of antibiotics has resulted in the emergence of antibiotic-resistant pathogens. This fact, coupled with the paucity of new antibiotic developments, has spurred efforts to combat antibiotic resistance. One of the most critical components of these efforts is antibiotic stewardship, a multidisciplinary endeavor, employing a collection of interventions in a variety of health care settings with the aim of promoting appropriate utilization of antibiotics. This article describes antibiotic stewardship programs and key practices used to minimize the development and spread of antibiotic-resistant pathogens including the optimization of antibiotic pharmacokinetics and pharmacodynamics, the application of rapid diagnostic tools, and the use of computerized provider order entry tools.

Emerging Analytical Techniques for Rapid Pathogen Identification and Susceptibility Testing

In the face of looming threats from multi-drug resistant microorganisms, there is a growing need for technologies that will enable rapid identification and drug susceptibility profiling of these pathogens in health care settings. In particular, recent progress in microfluidics and nucleic acid amplification is pushing the boundaries of timescale for diagnosing bacterial infections. With a diverse range of techniques and parallel developments in the field of analytical chemistry, an integrative perspective is needed to understand the significance of these developments. This review examines the scope of new developments in assay technologies grouped by key enabling domains of research. First, we examine recent development in nucleic acid amplification assays for rapid identification and drug susceptibility testing in bacterial infections. Next, we examine advances in microfluidics that facilitate acceleration of diagnostic assays via integration and scale. Lastly, recentdevelopments in biosensor technologies are reviewed. We conclude this review with perspectives on the use of emerging concepts to develop paradigm-changing assays.

Direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry and real-time PCR in a combined protocol for diagnosis of bloodstream infections: a turnaround time approach

Bloodstream infections (BSIs) are serious infections associated with high rates of morbidity and mortality. Every hour delay in initiation of an effective antibiotic increases mortality due to sepsis by 7%. Turnaround time (TAT) for conventional blood cultures takes 48 h, forcing physicians to streamline therapy by exposing patients to broad-spectrum antimicrobials. Our objective was (1) to evaluate the accuracy and TAT of an optimized workflow combining direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) and in-house real-time polymerase chain reaction (PCR) for bacterial identification and antimicrobial resistance profiling directly from positive blood bottles for diagnosing bloodstream infections and (2) to verify the effect of reporting results to medical staff. A total of 103 BSI episodes from 91 patients admitted to three hospitals in São Paulo, Brazil were included. TAT from molecular versus conventional methods was measured and compared. Our protocol showed an overall agreement of 93.5% for genus and 78.5% for species identification; 74.2% for methicillin resistance detection, 89.2% for extended-spectrum β-lactamase profiling, 77.8% for metallo-β-lactamase profiling, and 100% for carbapenemase profile and vancomycin-resistance detection when compared with conventional testing. TAT of molecular sample processing according to our protocol was 38 h shorter than conventional methods. Antimicrobial interventions were possible in 27 BSI episodes. Antimicrobial discontinuation was achieved in 12 BSI episodes while escalation of therapy occurred in 15 episodes. Antimicrobial therapy was inadequate in three (12%) BSI episodes diagnosed using results of molecular testing. Our in-house rapid protocol for identifying both bacteria and antimicrobial resistance provided rapid and accurate results, having good agreement with conventional testing results. These results could contribute to faster antimicrobial therapy interventions in BSI episodes.

Anthocyanins and metabolites from purple rice inhibit IL-1β-induced matrix metalloproteinases expression in human articular chondrocytes through the NF-κB and ERK/MAPK pathway

Osteoarthritis (OA) is a common degenerative joint disease, which is closely related to cartilage degradation. Anthocyanins, a natural flavonoid pigments, exhibit strong antioxidant and anti-inflammatory properties. However, the effect of anthocyanin on inflammatory response in OA has not been investigated. Our results showed that cyanidin-3-O-glucoside (C3G) and peonidin-3-O-glucoside (P3G), the main anthocyanins found in three Thai purple rice cultivars, attenuated the inhibition of porcine cartilage degradation in an experimental model. The effects of three Thai purple rice extracts were related to their high concentration of anthocyanins. Moreover, protocatechuic acid (PA), the main metabolite of anthocyanin, has chondroprotective potential by reducing glycosaminoglycans and collagen breakdown in IL-1β/OSM-induced porcine cartilage explants in long-term condition. The induction of matrix metalloproteinases (MMPs) caused by IL-1β-stimulated human chondrocytes was also attenuated by C3G, P3G, and their metabolites. Furthermore, C3G, P3G, and their metabolites pretreatment significantly inhibited IκBα degradation, the level of p-p65, and ERK/MAPK pathway. Additionally, PA pretreatment enhanced the phosphorylation of JNK in IL-1β-stimulated human chondrocytes. These findings indicated that anthocyanin in Thai purple rice exhibited anti-inflammatory effects in IL-1β-stimulated human chondrocytes by inhibiting NF-κB and ERK/MAPK signaling pathway.

Evaluation of QuickFISH and maldi Sepsityper for identification of bacteria in bloodstream infection

BACKGROUND

Early detection of bacteria and their antibiotic susceptibility patterns are critical to guide therapeutic decision-making for optimal care of septic patients. The current gold standard, blood culturing followed by subculture on agar plates for subsequent identification, is too slow leading to excessive use of broad-spectrum antibiotic with harmful consequences for the patient and, in the long run, the public health. The aim of the present study was to assess the performance of two commercial assays, QuickFISH® (OpGen) and Maldi Sepsityper™ (Bruker Daltonics) for early and accurate identification of microorganisms directly from positive blood cultures.

MATERIALS AND METHODS

During two substudies of positive blood cultures, the two commercial assays were assessed against the routine method used at the clinical microbiology laboratory, Unilabs AB, at Skaraborg Hospital, Sweden.

RESULTS

The Maldi Sepsityper™ assay enabled earlier microorganism identification. Using the cut-off for definite species identification according to the reference method (>2.0), sufficiently accurate species identification was achieved, but only among Gram-negative bacteria. The QuickFISH^® assay was time-saving and showed high concordance with the reference method, 94.8% (95% CI 88.4-98.3), when the causative agent was covered by the QuickFISH^® assay.

CONCLUSIONS

The use of the commercial assays may shorten the time to identification of causative agents in bloodstream infections and can be a good complement to the current clinical routine diagnostics. Nevertheless, the performance of the commercial assays is considerably affected by the characteristics of the causative agents.

Rapid Diagnostics for Blood Cultures: Supporting Decisions for Antimicrobial Therapy and Value-Based Care

Bacteremia and sepsis are critically important syndromes with high mortality, morbidity, and associated costs. Bloodstream infections and sepsis are among the top causes of mortality in the US, with >600 deaths each day. Most septic patients can be found in emergency medicine departments or critical care units, settings in which rapid administration of targeted antibiotic therapy can reduce mortality. Unfortunately, routine blood cultures are not rapid enough to aid in the decision of therapeutic intervention at the onset of bacteremia. As a result, empiric, broad-spectrum treatment is common-a costly approach that may fail to target the correct microbe effectively, may inadvertently harm patients via antimicrobial toxicity, and may contribute to the evolution of drug-resistant microbes. To overcome these challenges, laboratorians must understand the complexity of diagnosing and treating septic patients, focus on creating algorithms that rapidly support decisions for targeted antibiotic therapy, and synergize with existing emergency department and critical care clinical practices put forth in the Surviving Sepsis Guidelines.

Direct antimicrobial susceptibility tests of bacteria and yeasts from positive blood cultures by using serum separator gel tubes and MALDI-TOF MS

Early and appropriate antimicrobial treatment can effectively reduce the mortality rate caused by bloodstream infections (BSIs) and is critical for favorable patient outcomes. In general, >90% of positive blood cultures will show positive results within 48 h after incubation in the BACTECTM FX system. However, an additional 6-8 h are required to obtain clones of the bacterium and another 10-24 h to obtain antimicrobial susceptibility test (AST) results. In this study, direct ASTs of bacteria and yeasts from positive blood cultures were performed by using serum separator gel tubes and matrix-assisted laser desorption ionization-time of flight mass spectrometry(MALDI-TOF MS). 153 BSI cases were caused by a single pathogen. The coincidence rates of genus and species identification between the direct method (from positive blood cultures) and reference method (from subcultured clones) were 86.9% and 83%, respectively. On average, 98.6% of the direct ASTs in 88 Gram-negative bacteria tested had an accurate result compared to the reference method. In Gram- positive bacteria and yeasts, the accuracy rates were 99.2% and 100%, respectively. MALDI-TOF MS combined with serum separator gel tubes can be used for rapidly identifying and performing ASTs on positive blood cultures.

Evaluation of an in-house MALDI-TOF MS rapid diagnostic method for direct identification of micro-organisms from blood cultures

PURPOSE

Bloodstream infections are major causes of morbidity and mortality among hospitalized patients worldwide. Early identification of micro-organisms from blood culture can facilitate earlier optimization of treatment. The objective of this study was to assess an in-house method based on a new matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) platform (Clin-TOF MS) for direct organism identification.

METHODOLOGY

We studied the performance of the in-house method for direct identification and the conventional sub-culture method in parallel. Identification from subcultures was analysed with Bruker MS as the reference method.

RESULTS

A total of 666 blood cultures with a single micro-organism that flagged positive after no more than a 3-day incubation period were collected. The identification accuracy of the in-house Clin-TOF MS method for direct identification and the sub-culture method was 88.6 and 100 %, respectively. The in-house method exhibited better performance for Gram-negative bacteria than for Gram-positive bacteria (93.3 vs 81.6 %). The accuracy rate for anaerobes was 100 % (3/3). The lowest accurate identification rate was for yeast; this was only 20 %. Lytic Anaerobic/F (LAF) and Plus Aerobic/F (PAF) provided the highest accurate identification rates, and it was noteworthy that the accuracy rate for FAN Aerobic (FA) was 82 %, which is higher than previously reported and showed that the method was effective.

CONCLUSION

Our study provides an effective sample preparation method for the direct identification of pathogens from positive blood culture vials via Clin-TOF MS at a very low cost of about $0.5 per sample and with a short turnaround time of about 20 min. This will help clinicians make precise diagnoses and provide targeted prescriptions, reducing the risk of the potential development of resistance.

A 5-year study of the performance of the Verigene Gram-positive blood culture panel in a pediatric hospital

High accuracy of direct from positive blood culture molecular panels is imperative, particularly for the detection of resistance determinants as it allows for antimicrobial optimization prior to conventional susceptibility testing. In this study, we provide extensive data since implementation of the Verigene Gram-positive blood culture panel (BC-GP) in 2013. Within 5 years, 1636 blood culture bottles positive for a Gram-positive organism were tested on the BC-GP panel. The BC-GP panel identified 1520 Gram-positive organisms in 1636 (92.9%) blood cultures tested. For positive blood cultures, we observed 96.4% (806/834) concordance to the species level. Compared with conventional antimicrobial susceptibility testing, the positive percent agreement (PPA) of methicillin-resistant SA (MRSA) (50) and methicillin-resistant SE (MRSE) (365) was 100%. The mecA gene was detected in two methicillin-susceptible Staphylococcus aureus (MSSA) and one methicillin-susceptible S. epidermidis (MSSE) with a negative percent agreement (NPA) of 99.1% (221/223) and 99.2% (120/121), respectively. The PPA and NPA for vancomycin-resistant Enterococcus faecium (VRE) was 100%. The BC-GP panel demonstrated excellent performance and clinicians can confidently de-escalate antimicrobial therapy in the absence of mecA and vanA/B gene.

Use of the MALDI BioTyper system and rapid BACpro with MALDI-TOF MS for rapid identification of microorganisms causing bacterial urinary tract infection in feline urine samples

With the increasing number of cats kept as pets, opportunities to treat cats with lower urinary tract disease (LUTD) have recently increased in the clinical veterinary field. Urine samples collected from 50 cats with bacterial cystitis brought to Maeda Veterinary Hospital between August 10, 2015 and March 31, 2017 were used in the study. Sample preparation of the urine was performed using a MALDI Sepsityper kit and rapid BACpro. To identify the isolates, MALDI-TOF MS was performed on an AutoFlex TOF/TOF mass spectrometer. MALDI-TOF MS using rapid BACpro for pretreatment was found to be a quick and reliable method for identification of bacteria from infected urine, with a shortened analysis time enabling earlier and more accurate selection of antibiotics for treatment of feline LUTD.

Diagnosis of bloodstream infections from positive blood cultures and directly from blood samples: recent developments in molecular approaches

BACKGROUND

Bloodstream infections are a major cause of death with increasing incidence and severity. Blood cultures are still the reference standard for microbiological diagnosis, but are rather slow. Molecular methods can be used as add-on complementary assays. They can be useful to speed up microbial identification and to predict antimicrobial susceptibility, applied to direct blood samples or positive blood cultures.

AIM

To review recent developments in molecular-based diagnostic platforms used for the identification of bloodstream infections, with a focus on assays performed directly on blood samples and positive blood cultures.

SOURCES

Peer reviewed articles, conference abstracts, and manufacturers' websites.

CONTENT

We give an update on recent developments of molecular methods in diagnosing BSIs. We first describe the currently available molecular methods to be used for positive blood cultures including: a) in situ hybridization-based methods; b) DNA-microarray-based hybridization technology; c) nucleic acid amplification-based methods; and d) combined methods. Subsequently, molecular methods applied directly to whole blood samples are discussed, including the use of nucleic acid amplification-based methods, T2 magnetic resonance-based methods, and metagenomics for diagnosing BSIs.

IMPLICATIONS

Advances in molecular-based methods complementary to conventional blood culture diagnostics and antimicrobial stewardship programmes may optimize infection management by allowing rapid identification of pathogens and relevant antimicrobial resistance genes. Rapid diagnosis of the causing microorganism and relevant resistance determinants is important for early administration and modification of appropriate antimicrobial therapy. Ultimately, this may lead to improved quality and cost-effectiveness of health care, as well as reduced antimicrobial resistance selection.

Field trials of blood culture identification FilmArray in regional Australian hospitals

Purpose. In this field trial of rapid blood culture identification (BCID), we aimed to determine whether the improved speed and accuracy of specific BCID predicted in our earlier pilot study could be obtained in regional hospitals by deploying a multiplex PCR FilmArray (Biomerieux, France) capability in their laboratories.Methods. We trained local hospital laboratory staff to operate the FilmArray equipment and act on the results. To do this, we integrated the multiplex PCR into the standard laboratory blood culture workflow and reporting procedure.Results. Of 100 positive blood culture episodes, BCID FilmArray results were correct in all 42 significant monobacterial cultures, with a fully predictive identity in 38 (90.5 %) and a partial identity in another four (9.5 %). There was one major error; a false positive Pseudomonas aeruginosa. The minor errors were the detection of one methicillin-resistant Staphylococcus aureus, which proved to be a methicillin-sensitive S. aureus mixed with a methicillin-resistant coagulase-negative staphylococcus, five false negative coagulase-negative staphylococci and one false negative streptococcus species. We found that 41/49 (84 %) clinically significant mono- and polymicrobial culture results were fully predictive of culture-based identification to bacterial species level at a mean of 1.15 days after specimen collection.Conclusions. There was a reduction of 1.21 days in the time taken to produce a definitive BCID compared to the previous year, translating into earlier communication of more specific blood culture results to the treating physician. Reduced time to definitive blood culture results has a direct benefit for isolated Australian communities at great distances from specialist hospital services.

Rapid phenotypic methods to improve the diagnosis of bacterial bloodstream infections: meeting the challenge to reduce the time to result

BACKGROUND

Administration of appropriate antimicrobial therapy is one of the key factors in surviving bloodstream infections. Blood culture is currently the reference standard for diagnosis, but conventional practices have long turnaround times while diagnosis needs to be faster to improve patient care. Phenotypic methods offer an advantage over genotypic methods in that they can identify a wide range of taxa, detect the resistance currently expressed, and resist genetic variability in resistance detection.

AIMS

We aimed to discuss the wide array of phenotypic methods that have recently been developed to substantially reduce the time to result from identification to antibiotic susceptibility testing.

SOURCES

A literature review focusing on rapid phenotypic methods for improving the diagnosis of bloodstream infection was the source.

CONTENT

Rapid phenotypic bacterial identification corresponds to Matrix-assisted laser-desorption/ionization time of flight mass spectrometry (MALDI-TOF), and rapid antimicrobial susceptibility testing methods comprised of numerous different approaches, are considered and critically assessed. Particular attention is also paid to emerging technologies knocking at the door of routine microbiology laboratories. Finally, workflow integration of these methods is considered.

IMPLICATIONS

The broad panel of phenotypic methods currently available enables healthcare institutions to draw up their own individual approach to improve bloodstream infection diagnosis but requires a thorough evaluation of their workflow integration. Clinical microbiology will probably move towards faster methods while maintaining a complex multi-method approach as there is no all-in-one method.

Simple Sample Preparation Method for Direct Microbial Identification and Susceptibility Testing From Positive Blood Cultures

Rapid identification and determination of the antibiotic susceptibility profiles of the infectious agents in patients with bloodstream infections are critical steps in choosing an effective targeted antibiotic for treatment. However, there has been minimal effort focused on developing combined methods for the simultaneous direct identification and antibiotic susceptibility determination of bacteria in positive blood cultures. In this study, we constructed a lysis-centrifugation-wash procedure to prepare a bacterial pellet from positive blood cultures, which can be used directly for identification by matrix-assisted laser desorption/ionization-time-of-flight mass spectrometry (MALDI-TOF MS) and antibiotic susceptibility testing by the Vitek 2 system. The method was evaluated using a total of 129 clinical bacteria-positive blood cultures. The whole sample preparation process could be completed in <15 min. The correct rate of direct MALDI-TOF MS identification was 96.49% for gram-negative bacteria and 97.22% for gram-positive bacteria. Vitek 2 antimicrobial susceptibility testing of gram-negative bacteria showed an agreement rate of antimicrobial categories of 96.89% with a minor error, major error, and very major error rate of 2.63, 0.24, and 0.24%, respectively. Category agreement of antimicrobials against gram-positive bacteria was 92.81%, with a minor error, major error, and very major error rate of 4.51, 1.22, and 1.46%, respectively. These results indicated that our direct antibiotic susceptibility analysis method worked well compared to the conventional culture-dependent laboratory method. Overall, this fast, easy, and accurate method can facilitate the direct identification and antibiotic susceptibility testing of bacteria in positive blood cultures.

An Improved In-house MALDI-TOF MS Protocol for Direct Cost-Effective Identification of Pathogens from Blood Cultures

Background: Bloodstream infection is a major cause of morbidity and mortality in hospitalized patients worldwide. Delays in the identification of microorganisms often leads to a poor prognosis. The application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) directly to blood culture (BC) broth can potentially identify bloodstream infections earlier, and facilitate timely management.

Methods: We developed an “in-house” (IH) protocol for direct MALDI-TOF MS based identification of organisms in positive BCs. The IH protocol was initially evaluated and improved with spiked BC samples, and its performance was compared with the commercial Sepsityper™ kit using both traditional and modified cut-off values. We then studied in parallel the performance of the IH protocol and the colony MS identifications in positive clinical BC samples using only modified cut-off values. All discrepancies were investigated by “gold standard” of gene sequencing.

Results: In 54 spiked BC samples, the IH method showed comparable results with Sepsityper™ after applying modified cut-off values. Specifically, accurate species and genus level identification was achieved in 88.7 and 3.9% of all the clinical monomicrobial BCs (284/301, 94.4%), respectively. The IH protocol exhibited superior performance for Gram negative bacteria than for Gram positive bacteria (92.8 vs. 82.4%). For anaerobes and yeasts, accurate species identification was achieved in 80.0 and 90.0% of the cases, respectively. For polymicrobial cultures (17/301, 5.6%), MALDI-TOF MS correctly identified a single species present in all the polymicrobial BCs under the Standard mode, while using the MIXED method, two species were correctly identified in 52.9% of the samples. Comparisons based on BC bottle type, showed that the BACTEC™ Lytic/10 Anaerobic/F culture vials performed the best.

Conclusion: Our study provides a novel and effective sample preparation method for MALDI-TOF MS direct identification of pathogens from positive BC vials, with a lower cost ($1.5 vs. $ 7) albeit a slightly more laborious extracting process (an extra 15 min) compared with Sepsityper™ kit.

Direct identification of microorganisms from thioglycolate broth by MALDI-TOF MS

We developed an easy MALDI-TOF MS-based assay to identify microorganisms directly from thioglycolate broth. A total of 101 positive thioglycolate broths inoculated with 15 different kinds of samples were evaluated. In 91 samples (90.1%), direct MALDI-TOF MS identifications were the same as those obtained after conventional laboratory procedures including subcultures. In 10 samples misidentified by direct processing, yeasts or mixed cultures grew in the thioglycolate subcultures, or high cellular debris hampered a correct analysis. This rapid method can provide a fast, clinically- relevant species-level identification without disturbing the daily workflow in clinical microbiology laboratories.

Bloodstream Infections

Bacteremia and sepsis are conditions associated with high mortality and are of great impact to health care operations. Among the top causes of mortality in the United States, these conditions cause over 600 fatalities each day. Empiric, broad-spectrum treatment is a common but often a costly approach that may fail to effectively target the correct microbe, may inadvertently harm patients via antimicrobial toxicity or downstream antimicrobial resistance. To meet the diagnostic challenges of bacteremia and sepsis, laboratories must understand the complexity of diagnosing and treating septic patients, in order to focus on creating algorithms that can help direct a more targeted approach to antimicrobial therapy and synergize with existing clinical practices defined in new Surviving Sepsis Guidelines. Significant advances have been made in improving blood culture media; as yet no molecular or antigen-based method has proven superior for the detection of bacteremia in terms of limit of detection. Several methods for rapid molecular identification of pathogens from blood cultures bottles are available and many more are on the diagnostic horizon. Ultimately, early intervention by molecular detection of bacteria and fungi directly from whole blood could provide the most patient benefit and contribute to tailored antibiotic coverage of the patient early on in the course of the disease. Although blood cultures remain as the best means of diagnosing bacteremia and candidemia, complementary testing with antigen tests, microbiologic investigations from other body sites, and histopathology can often aid in the diagnosis of disseminated disease, and application of emerging nucleic acid test methods and other new technology may greatly impact our ability to bacteremic and septic patients, particularly those who are immunocompromised.

Parallel Evaluation of the MALDI Sepsityper and Verigene BC-GN Assays for Rapid Identification of Gram-Negative Bacilli from Positive Blood Cultures

Rapid identification of microorganisms from positive blood cultures has improved clinical management and antimicrobial stewardship. The advent of matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has reduced the time to identification of cultured isolates and is now often the definitive method used in the clinical microbiology laboratory. The commercial in vitro diagnostic MALDI Sepsityper (Sepsityper) kit has the potential for standardization and clinical routine use for the rapid identification of a broad range of bacteria from positive blood cultures. In this study, we performed a parallel evaluation of the Sepsityper (Bruker Daltonics, Billerica, MA) and the Verigene BC-GN (BC-GN) assays (Nanosphere, Inc., Northfield, IL) for the identification of Gram-negative bacilli. A total of 210 Bactec bottles demonstrating Gram-negative bacilli were prospectively enrolled for this study. Among these, 200 monomicrobial cultures were included in the comparative analysis. For monomicrobial cultures, the BC-GN detected 85% (170/200) compared to that detected by routine culture while the Sepsityper detected 94% (188/200) and 91% (181/200) to the genus and species levels, respectively. Comparable positive percentage agreement and negative percentage agreement were observed between the Sepsityper (96.5% and 98.8%, respectively) and the BC-GN (99.4% and 99.8%, respectively) when only (n = 170, 85%) organisms targeted by the latter test were included in the analysis. In conclusion, the two methods evaluated in this study showed excellent performance characteristics for the identification of Gram-negative bacilli commonly isolated from blood cultures. The Sepsityper showed a broader identification range capability that may further improve clinical management and antimicrobial stewardship in patients with less frequent Gram-negative bacilli bloodstream infections.

Molecular methods for septicemia diagnosis

Septicemia remains a major cause of hospital mortality. Blood culture remains the best approach to identify the etiological microorganisms when a bloodstream infection is suspected but it takes long time because it relies on bacterial or fungal growth. The introduction in clinical microbiology laboratories of the matrix-assisted laser desorption ionization time-of-flight mass spectrometry technology, DNA hybridization, microarrays or rapid PCR-based test significantly reduce the time to results. Tests for direct detection in whole blood samples are highly desirable because of their potential to identify bloodstream pathogens without waiting for blood cultures to become positive. Nonetheless, limitations of current molecular diagnostic methods are substantial. This article reviews these new molecular approaches (LightCycler SeptiFast, Magicplex sepsis real time, Septitest, VYOO, PCR/ESI-MS analysis, T2Candida).

Potential Impact of Rapid Blood Culture Testing for Gram-Positive Bacteremia in Japan with the Verigene Gram-Positive Blood Culture Test

Background. Early detection of Gram-positive bacteremia and timely appropriate antimicrobial therapy are required for decreasing patient mortality. The purpose of our study was to evaluate the performance of the Verigene Gram-positive blood culture assay (BC-GP) in two special healthcare settings and determine the potential impact of rapid blood culture testing for Gram-positive bacteremia within the Japanese healthcare delivery system. Furthermore, the study included simulated blood cultures, which included a library of well-characterized methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant enterococci (VRE) isolates reflecting different geographical regions in Japan. Methods. A total 347 BC-GP assays were performed on clinical and simulated blood cultures. BC-GP results were compared to results obtained by reference methods for genus/species identification and detection of resistance genes using molecular and MALDI-TOF MS methodologies. Results. For identification and detection of resistance genes at two clinical sites and simulated blood cultures, overall concordance of BC-GP with reference methods was 327/347 (94%). The time for identification and antimicrobial resistance detection by BC-GP was significantly shorter compared to routine testing especially at the cardiology hospital, which does not offer clinical microbiology services on weekends and holidays. Conclusion. BC-GP generated accurate identification and detection of resistance markers compared with routine laboratory methods for Gram-positive organisms in specialized clinical settings providing more rapid results than current routine testing.

Multicenter Evaluation of the Portrait Staph ID/R Blood Culture Panel for Rapid Identification of Staphylococci and Detection of the mecA Gene

Bloodstream infections are a leading cause of morbidity and mortality in the United States and are associated with increased health care costs. We evaluated the Portrait Staph ID/R blood culture panel (BCP) multiplex PCR assay (Great Basin Scientific, Salt Lake City, UT) for the rapid and simultaneous identification (ID) of Staphylococcus aureus, Staphylococcus lugdunensis, and Staphylococcus species to the genus level and the detection of the mecA gene directly from a positive blood culture bottle. A total of 765 Bactec bottles demonstrating Gram-positive cocci in singles or clusters were tested during the prospective trial at 3 clinical sites. The Portrait Staph ID/R BCP results were compared with results from conventional biochemical and cefoxitin disk methods performed at an independent laboratory. Discordant ID and mecA results were resolved by rpoB gene sequencing and mecA gene sequencing, respectively. A total of 658 Staphylococcus species isolates (S. aureus, 211 isolates; S. lugdunensis, 3 isolates; and Staphylococcus spp., 444 isolates) were recovered from monomicrobial and 33 polymicrobial blood cultures. After discrepant analysis, the overall ratios of Portrait Staph ID/R BCP positive percent agreement and negative percent agreement were 99.4%/99.9% for Staphylococcus ID and 99.7%/99.2% for mecA detection.

Utilization Management in a Large Community Hospital

The utilization management of laboratory tests in a large community hospital is similar to academic and smaller community hospitals. There are numerous factors that influence laboratory utilization. Outside influences like hospitals buying physician practices, increasing numbers of hospitalists, and hospital consolidation will influence the number and complexity of the test menu that will need to be monitored for over and/or under utilization in the central laboratory and reference laboratory. CLIA’88 outlines the four test categories including point-of-care testing (waived) and provider-performed microscopy that need laboratory test utilization management. Incremental cost analysis is the most efficient method for evaluating utilization reduction cost savings. Economies of scale define reduced unit cost per test as test volume increases. Outreach programs in large community hospitals provide additional laboratory tests from non-patients in physician offices, nursing homes, and other hospitals. Disruptive innovations are changing the present paradigms in clinical diagnostics, like wearable sensors, MALDI-TOF, multiplex infectious disease panels, cell-free DNA, and others. Obsolete tests need to be universally defined and accepted by manufacturers, physicians, laboratories, and hospitals, to eliminate access to their reagents and testing platforms.

Rapid Identification of Microorganisms from Positive Blood Culture by MALDI-TOF MS After Short-Term Incubation on Solid Medium

Matrix-assisted laser-desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry (MS) is a useful tool for rapid identification of microorganisms. Unfortunately, its direct application to positive blood culture is still lacking standardized procedures. In this study, we evaluated an easy- and rapid-to-perform protocol for MALDI-TOF MS direct identification of microorganisms from positive blood culture after a short-term incubation on solid medium. This protocol was used to evaluate direct identification of microorganisms from 162 positive monomicrobial blood cultures; at different incubation times (3, 5, 24 h), MALDI-TOF MS assay was performed from the growing microorganism patina. Overall, MALDI-TOF MS concordance with conventional methods at species level was 60.5, 80.2, and 93.8% at 3, 5, and 24 h, respectively. Considering only bacteria, the identification performances at species level were 64.1, 85.0, and 94.1% at 3, 5, and 24 h, respectively. This protocol applied to a commercially available MS typing system may represent, a fast and powerful diagnostic tool for pathogen direct identification and for a promptly and pathogen-driven antimicrobial therapy in selected cases.

Use of MALDI-TOF mass spectrometry after liquid enrichment (BD Bactec™) for rapid diagnosis of bone and joint infections

Advantages of MALDI-TOF MS (MS) were evaluated for diagnosis of bone and joint infections after enrichment of synovial fluid (SF) or crushed osteoarticular samples (CSs). MS was performed after enrichment of SF or crushed osteoarticular samples CS (n = 108) in both aerobic and anaerobic vials. Extraction was performed on 113 vials (SF: n = 47; CS: n = 66), using the Sepsityper^® kit prior identification by MS. The performances of MS, score and reproducibility results on bacterial colonies from blood agar and on pellets after enrichment in vials, were compared. MS analysis of the vial resulted in correct identification of bacteria at a species and genus level (80.5% and 92% of cases, respectively). The reproducibility was superior for aerobic Gram-positive bacteria (Staphylococci and Gram-positive bacilli: 100% colonies), as compared to aerobic Gram-negative bacilli (89.7%), anaerobes (83.3%) and Streptococcus/Enterococcus (58.8%). MS performance was significantly better for staphylococci than for streptococci on all identification parameters. For polymicrobial cultures, identification (score>1.5) of two species by MS was acceptable in 92.8% of cases. Use of MS on enrichment pellets of bone samples is an accurate, rapid and robust method for bacterial identification of clinical isolates from osteoarticular infections, except for streptococci, whose identification to species level remains difficult.

Pneumococcal Disease in the Era of Pneumococcal Conjugate Vaccine

Universal immunization of infants and toddlers with pneumococcal conjugate vaccines over the last 15 years has dramatically altered the landscape of pneumococcal disease. Decreases in invasive pneumococcal disease, all-cause pneumonia, empyema, mastoiditis, acute otitis media, and complicated otitis media have been reported from multiple countries in which universal immunization has been implemented. Children with comorbid conditions have higher rates of pneumococcal disease and increased case fatality rates compared with otherwise healthy children, and protection for the most vulnerable pediatric patients will require new strategies to address the underlying host susceptibility and the expanded spectrum of serotypes observed.