Matrix-assisted laser desorption ionization-time of flight mass spectrometry-based single nucleotide polymorphism genotyping assay using iPLEX gold technology for identification of Mycobacterium tuberculosis complex species and lineages

MALDI-TOF mass spectrometry from nucleic acid: development and evaluation of a novel platform for identification of mycobacteria and detection of genetic markers of resistance

Complete identification methods are critical for evaluating nontuberculous mycobacteria (NTM). Here, we describe a novel diagnostic method for identification of eight NTM, Mycobacterium tuberculosis complex, and three drug resistance markers using PCR/matrix-assisted, laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) from cultured organisms. With this technology, a multiplex end-point PCR is performed for targets of interest. Detection probes that are extended in the presence of a target are added. The extended probes have greater molecular weight and can be detected by MALDI-TOF MS. An AFB Primary Panel was designed to differentiate Mycobacterium avium; Mycobacterium intracellulare subsp. chimaera; Mycobacterium avium complex (other); Mycobacterium abscessus subsp. abscessus, bolletii, and massiliense; Mycobacterium kansasii, and M. tuberculosis complex. This design should cover 90% (3,483/3,691) of mycobacteria seen onsite. A development set of unblinded isolates (n = 217) was used to develop PCR primers, detection probes, and probe barcodes. It demonstrated 99.1% (215/217) agreement with reference methods. An evaluation set using blinded isolates (n = 320) showed an overall sensitivity of 94.3% (range by target: 90.0-100%). Overall specificity from negative media, non-target mycobacteria, and bacteria was 99.1% (108/109; range by target: 94.4-100%). Three drug resistance markers erm (41), rrl, and rrs demonstrated 100%, 91%, and 100% sensitivity, respectively, and >99% specificity. Limit of detection per target ranged from 2.2 × 103 to 9.9 × 106 CFU/mL. The AFB Primary Panel allows for mycobacterial speciation, subspeciation, and resistance mutation detection, which is essential for diagnosis, appropriate therapy, identifying outbreaks, and managing treatment-refractory disease. It can perform with high-throughput and high specificity and sensitivity from isolates.IMPORTANCEEven closely related mycobacteria can have unique treatment patterns, but differentiating these organisms is a challenge. Here, we tested an innovative platform that combines two commonly used technologies and creates something new: matrix-assisted, laser-desorption ionization time-of flight mass spectrometry was performed on PCR amplicons instead of on proteins. This created a robust system with the advantages of PCR (high discriminatory power, high throughput, detection of resistance) with the advantages of mass spectrometry (more targets, lower operational cost) in order to identify closely related mycobacterial organisms.

A comparative study of MassARRAY and GeneXpert assay in detecting rifampicin resistance in tuberculosis patients' clinical specimens

Objectives

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a potent tool for detecting drug resistance in tuberculosis (TB); however, concerns about its reliability have been raised. In this study, we assessed the reliability of MassARRAY (Sequenom, Inc.), which is a MALDI-TOF MS-based method, by comparing it to the well-established GeneXpert assay (Cepheid) as a reference method.

Methods

A retrospective study was conducted using laboratory data retrieved from Henan Chest Hospital (Zhengzhou, China). To ensure a rigorous evaluation, we adopted a comprehensive assessment approach by integrating multiple outcomes of the Xpert assay across various specimen types.

Results

Among the 170 enrolled TB cases, MassARRAY demonstrated significantly higher sensitivity (85.88%, 146 of 170) compared to the Xpert assay (76.62%, 118 of 154) in TB diagnosis (p < 0.05). The concordance in detecting rifampicin resistance between MassARRAY and the combined outcomes of the Xpert assay was 90%, while it was 97.37% (37 of 38) among smear-positive cases and 89.06% (57 of 64) among culture-positive cases. When compared to the phenotypic susceptibility outcomes of the 12 included drugs, consistency rates of 81.8 to 93.9% were obtained, with 87.9% for multiple drug resistance (MDR) identification.

Conclusion

MassARRAY demonstrates high reliability in detecting rifampicin resistance, and these findings may offer a reasonable basis for extrapolation to other drugs included in the test panel.

Evaluation of nucleotide MALDI-TOF-MS for the identification of Mycobacterium species

Background

The accurate identification of the Mycobacterium tuberculosis complex (MTBC) and different nontuberculous mycobacteria (NTM) species is crucial for the timely diagnosis of NTM infections and for reducing poor prognoses. Nucleotide matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) has been extensively used for microbial identification with high accuracy and throughput. However, its efficacy for Mycobacterium species identification has been less studied. The objective of this study was to evaluate the performance of nucleotide MALDI-TOF-MS for Mycobacterium species identification.

Methods

A total of 933 clinical Mycobacterium isolates were preliminarily identified as NTM by the MPB64 test. These isolates were identified by nucleotide MALDI-TOF-MS and Sanger sequencing. The performance of nucleotide MALDI-TOF MS for identifying various Mycobacterium species was analyzed based on Sanger sequencing as the gold standard.

Results

The total correct detection rate of all 933 clinical Mycobacterium isolates using nucleotide MALDI-TOF-MS was 91.64% (855/933), and mixed infections were detected in 18.65% (174/933) of the samples. The correct detection rates for Mycobacterium intracellulare, Mycobacterium abscessus, Mycobacterium kansasii, Mycobacterium avium, MTBC, Mycobacterium gordonae, and Mycobacterium massiliense were 99.32% (585/589), 100% (86/86), 98.46% (64/65), 94.59% (35/37), 100.00% (34/34), 95.65% (22/23), and 100% (19/19), respectively. For the identification of the MTBC, M. intracellulare, M. abscessus, M. kansasii, M. avium, M. gordonae, and M. massiliense, nucleotide MALDI-TOF-MS and Sanger sequencing results were in good agreement (k > 0.7).

Conclusion

In conclusion, nucleotide MALDI-TOF-MS is a promising approach for identifying MTBC and the most common clinical NTM species.

Fluoroquinolone heteroresistance, antimicrobial tolerance, and lethality enhancement

With tuberculosis, the emergence of fluoroquinolone resistance erodes the ability of treatment to interrupt the progression of MDR-TB to XDR-TB. One way to reduce the emergence of resistance is to identify heteroresistant infections in which subpopulations of resistant mutants are likely to expand and make the infections fully resistant: treatment modification can be instituted to suppress mutant enrichment. Rapid DNA-based detection methods exploit the finding that fluoroquinolone-resistant substitutions occur largely in a few codons of DNA gyrase. A second approach for restricting the emergence of resistance involves understanding fluoroquinolone lethality through studies of antimicrobial tolerance, a condition in which bacteria fail to be killed even though their growth is blocked by lethal agents. Studies with Escherichia coli guide work with Mycobacterium tuberculosis. Lethal action, which is mechanistically distinct from blocking growth, is associated with a surge in respiration and reactive oxygen species (ROS). Mutations in carbohydrate metabolism that attenuate ROS accumulation create pan-tolerance to antimicrobials, disinfectants, and environmental stressors. These observations indicate the existence of a general death pathway with respect to stressors. M. tuberculosis displays a variation on the death pathway idea, as stress-induced ROS is generated by NADH-mediated reductive stress rather than by respiration. A third approach, which emerges from lethality studies, uses a small molecule, N-acetyl cysteine, to artificially increase respiration and additional ROS accumulation. That enhances moxifloxacin lethality with M. tuberculosis in culture, during infection of cultured macrophages, and with infection of mice. Addition of ROS stimulators to fluoroquinolone treatment of tuberculosis constitutes a new direction for suppressing the transition of MDR-TB to XDR-TB.

Advances in ligase chain reaction and ligation-based amplifications for genotyping assays: Detection and applications

Genetic variants have been reported to cause several genetic diseases. Various genotyping assays have been developed for diagnostic and screening purposes but with certain limitations in sensitivity, specificity, cost effectiveness and/or time savings. Since the discovery of ligase chain reaction (LCR) in the late nineties, it became one of the most favored platforms for detecting these variants and also for genotyping low abundant contaminants. Recent and powerful modifications with the integration of various detection strategies such as electrochemical and magnetic biosensors, nanoparticles (NPs), quantum dots, quartz crystal and leaky surface acoustic surface biosensors, DNAzyme, rolling circle amplification (RCA), strand displacement amplification (SDA), surface enhanced raman scattering (SERS), chemiluminescence and fluorescence resonance energy transfer have been introduced to both LCR and ligation based amplifications to enable high-throughput and inexpensive multiplex genotyping with improved robustness, simplicity, sensitivity and specificity. In this article, classical and up to date modifications in LCR and ligation based amplifications are critically evaluated and compared with emphasis on points of strength and weakness, sensitivity, cost, running time, equipment needed, applications and multiplexing potential. Versatile genotyping applications such as genetic diseases detection, bacterial and viral pathogens detection are also detailed. Ligation based gold NPs biosensor, ligation based RCA and ligation mediated SDA assays enhanced detection limit tremendously with a discrimination power approaching 1.5aM, 2aM and 0.1fM respectively. MLPA (multiplexed ligation dependent probe amplification) and SNPlex assays have been commercialized for multiplex detection of at least 48 SNPs at a time. MOL-PCR (multiplex oligonucleotide ligation) has high-throughput capability with multiplex detection of 50 SNPs/well in a 96 well plate. Ligase detection reaction (LDR) is one of the most widely used LCR versions that have been successfully integrated with several detection strategies with improved sensitivity down to 0.4fM.

Mycobacterium tuberculosis lineage 4 comprises globally distributed and geographically restricted sublineages

Generalist and specialist species differ in the breadth of their ecological niches. Little is known about the niche width of obligate human pathogens. Here we analyzed a global collection of Mycobacterium tuberculosis lineage 4 clinical isolates, the most geographically widespread cause of human tuberculosis. We show that lineage 4 comprises globally distributed and geographically restricted sublineages, suggesting a distinction between generalists and specialists. Population genomic analyses showed that, whereas the majority of human T cell epitopes were conserved in all sublineages, the proportion of variable epitopes was higher in generalists. Our data further support a European origin for the most common generalist sublineage. Hence, the global success of lineage 4 reflects distinct strategies adopted by different sublineages and the influence of human migration.

Methodological and Clinical Aspects of the Molecular Epidemiology of Mycobacterium tuberculosis and Other Mycobacteria

Molecular typing has revolutionized epidemiological studies of infectious diseases, including those of a mycobacterial etiology. With the advent of fingerprinting techniques, many traditional concepts regarding transmission, infectivity, or pathogenicity of mycobacterial bacilli have been revisited, and their conventional interpretations have been challenged. Since the mid-1990s, when the first typing methods were introduced, a plethora of other modalities have been proposed. So-called molecular epidemiology has become an essential subdiscipline of modern mycobacteriology. It serves as a resource for understanding the key issues in the epidemiology of tuberculosis and other mycobacterial diseases. Among these issues are disclosing sources of infection, quantifying recent transmission, identifying transmission links, discerning reinfection from relapse, tracking the geographic distribution and clonal expansion of specific strains, and exploring the genetic mechanisms underlying specific phenotypic traits, including virulence, organ tropism, transmissibility, or drug resistance. Since genotyping continues to unravel the biology of mycobacteria, it offers enormous promise in the fight against and prevention of the diseases caused by these pathogens. In this review, molecular typing methods for Mycobacterium tuberculosis and nontuberculous mycobacteria elaborated over the last 2 decades are summarized. The relevance of these methods to the epidemiological investigation, diagnosis, evolution, and control of mycobacterial diseases is discussed.

Rapid and Simultaneous Detection of Major Drug Resistance Mutations in Reverse Transcriptase Gene for HIV-1 CRF01_AE, CRF07_BC and Subtype B in China Using Sequenom MassARRAY® System

The development of a rapid, high-throughput and cost-effective HIV-1 drug resistance (HIV-DR) testing system is a challenge for areas consisting different HIV-1 strains. In this study, we established a broadly reactive multiplex assay that could simultaneously detect major drug resistance mutations at 8 loci, which are associated with resistance to commonly used nucleoside reverse transcriptase inhibitors (NRTIs) and Non-nucleoside reverse transcriptase inhibitors (NNRTIs), in specimens of HIV-1 CRF01_AE, CRF07_BC and subtype B, the three major circulating strains in China, using the matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) provided by Sequenom MassARRAY® system. To establish the assay, pol gene fragments were prepared from the plasma viral RNA of 159 patients by nested PCR and the presence of wild type and mutant alleles at the 8 loci were analyzed by MALDI-TOF MS. In terms of loci, the detection rate of the alleles was greater than 97% for M41L, K65R, M184V and G190A, 91.2% for K101E/Q/P, 91.2% for T215F/Y, 89.9% for K103N/S and 80.5% for L210W. In terms of individuals, 80% of the alleles were detected in 95.4% CRF01_AE patients, 100% CRF07_BC patients and 83.3% subtype B patients. Importantly, the MALDI-TOF MS results were concordant to the drug resistance profiles of patients obtained from conventional sequencing analysis after excluded the failed detections. Using plasmid templates, the assay was estimated to be sensitive to detect drug resistant variants at level about 20% of the circulating viral population. The capability of this assay to detect mixed viral populations was further verified by two different patient specimens. In conclusion, this study evaluated the use of Sequenom MassARRAY® system for high-throughput detection of HIV-DR mutations towards the commonly used reverse transcriptase inhibitors in China.

Phylogenetic Analysis of Prevalent Tuberculosis and Non-Tuberculosis Mycobacteria in Isfahan, Iran, Based on a 360 bp Sequence of the rpoB Gene

Background

Taxonomic and phylogenetic studies of Mycobacterium species have been based around the 16sRNA gene for many years. However, due to the high strain similarity between species in the Mycobacterium genus (94.3% - 100%), defining a valid phylogenetic tree is difficult; consequently, its use in estimating the boundaries between species is limited. The sequence of the rpoB gene makes it an appropriate gene for phylogenetic analysis, especially in bacteria with limited variation.

Objectives

In the present study, a 360bp sequence of rpoB was used for precise classification of Mycobacterium strains isolated in Isfahan, Iran.

Materials and Methods

From February to October 2013, 57 clinical and environmental isolates were collected, subcultured, and identified by phenotypic methods. After DNA extraction, a 360bp fragment was PCR-amplified and sequenced. The phylogenetic tree was constructed based on consensus sequence data, using MEGA5 software.

Results

Slow and fast-growing groups of the Mycobacterium strains were clearly differentiated based on the constructed tree of 56 common Mycobacterium isolates. Each species with a unique title in the tree was identified; in total, 13 nods with a bootstrap value of over 50% were supported. Among the slow-growing group was Mycobacterium kansasii, with M. tuberculosis in a cluster with a bootstrap value of 98% and M. gordonae in another cluster with a bootstrap value of 90%. In the fast-growing group, one cluster with a bootstrap value of 89% was defined, including all fast-growing members present in this study.

Conclusions

The results suggest that only the application of the rpoB gene sequence is sufficient for taxonomic categorization and definition of a new Mycobacterium species, due to its high resolution power and proper variation in its sequence (85% - 100%); the resulting tree has high validity.

Molecular Epidemiology of Mycoplasma pneumoniae: Genotyping Using Single Nucleotide Polymorphisms and SNaPshot Technology

Molecular typing of Mycoplasma pneumoniae is an important tool for identifying grouped cases and investigating outbreaks. In the present study, we developed a new genotyping method based on single nucleotide polymorphisms (SNPs) selected from the whole-genome sequencing of eight M. pneumoniae strains, using the SNaPshot minisequencing assay. Eight SNPs, localized in housekeeping genes, predicted lipoproteins, and adhesin P1 genes were selected for genotyping. These SNPs were evaluated on 140 M. pneumoniae clinical isolates previously genotyped by multilocus variable-number tandem-repeat analysis (MLVA-5) and adhesin P1 typing. This method was also adapted for direct use with clinical samples and evaluated on 51 clinical specimens. The analysis of the clinical isolates using the SNP typing method showed nine distinct SNP types with a Hunter and Gaston diversity index (HGDI) of 0.836, which is higher than the HGDI of 0.583 retrieved for the MLVA-4 typing method, where the nonstable Mpn1 marker was removed. A strong correlation with the P1 adhesin gene typing results was observed. The congruence was poor between MLVA-5 and SNP typing, indicating distinct genotyping schemes. Combining the results increased the discriminatory power. This new typing method based on SNPs and the SNaPshot technology is a method for rapid M. pneumoniae typing directly from clinical specimens, which does not require any sequencing step. This method is based on stable markers and provides information distinct from but complementary to MLVA typing. The combined use of SNPs and MLVA typing provides powerful discrimination of strains.

Technical reproducibility of single-nucleotide and size-based DNA biomarker assessment using DNA extracted from formalin-fixed, paraffin-embedded tissues

DNA extracted from formalin-fixed, paraffin-embedded (FFPE) tissues has been used in the past to analyze genetic polymorphisms. We evaluated the technical reproducibility of different types of assays for gene polymorphisms using DNA extracted from FFPE material. By using the MassARRAY iPLEX system, we investigated polymorphisms in DPYD (rs1801159 and rs3918290), UMPS (rs1801019), ERCC1 (rs11615), ERCC1 (rs3212986), and ERCC2 (rs13181) in 56 FFPE DNA samples. By using PCR, followed by size-based gel electrophoresis, we also examined TYMS 5' untranslated region 2R/3R repeats and GSTT1 deletions in 50 FFPE DNA samples and 34 DNAs extracted from fresh-frozen tissues and cell lines. Each polymorphism was analyzed by two independent runs. We found that iPLEX biomarker assays measuring single-nucleotide polymorphisms provided consistent concordant results. However, by using FFPE DNA, size-based PCR biomarkers (GSTT1 and TYMS 5' untranslated region) were discrepant in 32.7% (16/49, with exact 95% CI, 19.9%-47.5%; exact binomial confidence limit test) and 4.2% (2/48, with exact 95% CI, 0.5%-14.3%) of cases, respectively, whereas no discrepancies were observed using intact genomic DNA. Our findings suggest that DNA from FFPE material can be used to reliably test single-nucleotide polymorphisms. However, results based on size-based PCR biomarkers, and particularly GSTT1 deletions, using FFPE DNA need to be interpreted with caution. Independent repeated assays should be performed on all cases to assess potential discrepancies.

[The new tools of microbiological diagnosis of tuberculosis]

This review focuses on the role of new tools in the "modern" microbiological diagnosis of tuberculosis. Traditional techniques of microscopy and culture remain essential to diagnostic certainty, but some innovations replace daily the older techniques such as the identification of Mycobacterium tuberculosis complex by immunochromatography or mass spectrometry MALDI-TOF type from positive cultures, or susceptibility testing in liquid medium. New tools that use molecular techniques have become important. They all have in common to optimize the fight against tuberculosis by reducing diagnostic delay. They also allow rapid detection of drug resistance. However, the techniques of gene amplification directly from clinical samples are still less sensitive than culture. Bacteriological diagnosis of tuberculosis disease therefore still relies on the complementarities of different phenotypic and molecular techniques.

Novel DNA chip based on a modified DigiTag2 assay for high-throughput species identification and genotyping of Mycobacterium tuberculosis complex isolates

A multipurpose high-throughput genotyping tool for the assessment of recent epidemiological data and evolutional pattern in Mycobacterium tuberculosis complex (MTBC) clinical isolates was developed in this study. To facilitate processing, 51 highly informative single nucleotide polymorphisms (SNPs) were selected for discriminating the clinically most relevant MTBC species and genotyping M. tuberculosis into its principle genetic groups (PGGs) and SNP cluster groups (SCGs). Because of the high flexibility of the DigiTag2 assay, the identical protocol and DNA array containing the identical set of probes were applied to the highly GC-rich mycobacterial genome. The specific primers with multiplex amplification and hybridization conditions based on the DigiTag2 principle were optimized and evaluated with 14 MTBC reference strains, 4 nontuberculous mycobacteria (NTM) isolates, and 322 characterized M. tuberculosis clinical isolates. The DNA chip that was developed revealed a 99.85% call rate, a 100% conversion rate, and 99.75% reproducibility. For the accuracy rate, 98.94% of positive calls were consistent with previous molecular characterizations. Our cost-effective technology was capable of simultaneously identifying the MTBC species and the genotypes of 96 M. tuberculosis clinical isolates within 6 h using only simple instruments, such as a thermal cycler, a hybridization oven, and a DNA chip scanner, and less technician skill was required than for other techniques. We demonstrate this approach's potential as a simple, flexible, and rapid tool for providing clearer information regarding circulating MTBC isolates.

A multiplex single nucleotide polymorphism genotyping method using ligase-based mismatch discrimination and CE-SSCP

Accuracy, simplicity, and cost-effectiveness are the most important criteria for a genotyping method for SNPs compatible with clinical use. One method developed for SNP genotyping, ligase-based discrimination, is considered the simplest for clinical diagnosis. However, multiplex assays using this method are limited by the detection method. Although CE has been introduced as an alternative to error prone microarray-based detection, the design process and multiplex assay procedure are complicated because of the DNA size-dependent separation principle. In this study, we developed a simple and accurate multiplex genotyping method using reaction condition-optimized ligation and high-resolution CE-based SSCP. With this high-resolution CE-SSCP system, we are able to use similar-sized probes, thereby eliminating the complex probe design step and simplifying the optimization process. We found that this method could accurately discriminate single-base mismatches in SNPs of the tp53 gene, used as targets for multiplex detection.

Single-nucleotide polymorphism discovery in Leptographium longiclavatum, a mountain pine beetle-associated symbiotic fungus, using whole-genome resequencing

Single-nucleotide polymorphisms (SNPs) are rapidly becoming the standard markers in population genomics studies; however, their use in nonmodel organisms is limited due to the lack of cost-effective approaches to uncover genome-wide variation, and the large number of individuals needed in the screening process to reduce ascertainment bias. To discover SNPs for population genomics studies in the fungal symbionts of the mountain pine beetle (MPB), we developed a road map to discover SNPs and to produce a genotyping platform. We undertook a whole-genome sequencing approach of Leptographium longiclavatum in combination with available genomics resources of another MPB symbiont, Grosmannia clavigera. We sequenced 71 individuals pooled into four groups using the Illumina sequencing technology. We generated between 27 and 30 million reads of 75 bp that resulted in a total of 1, 181 contigs longer than 2 kb and an assembled genome size of 28.9 Mb (N50 = 48 kb, average depth = 125x). A total of 9052 proteins were annotated, and between 9531 and 17,266 SNPs were identified in the four pools. A subset of 206 genes (containing 574 SNPs, 11% false positives) was used to develop a genotyping platform for this species. Using this roadmap, we developed a genotyping assay with a total of 147 SNPs located in 121 genes using the Illumina(®) Sequenom iPLEX Gold. Our preliminary genotyping (success rate = 85%) of 304 individuals from 36 populations supports the utility of this approach for population genomics studies in other MPB fungal symbionts and other fungal nonmodel species.

A 21-locus autosomal SNP multiplex and its application in forensic science

To develop a cost-effective technique for single-nucleotide polymorphism (SNP) genotyping and improve the efficiency to analyze degraded DNA, we have established a novel multiplex system including 21-locus autosomal SNPs and amelogenin locus, which was based on allele-specific amplification (ASA) and universal reporter primers (URP). The target amplicons for each of the 21 SNPs arranged from 63 base pair (bp) to 192 bp. The system was tested in 539 samples from three ethnic groups (Han, Mongolian, and Zhuang population) in China, and the total power of discrimination (TPD) and cumulative probability of exclusion (CPE) were more than 0.99999999 and 0.98, respectively. The system was further validated with forensic samples and full profiles could be achieved from degraded DNA and 63 case-type samples. In summary, the multiplex system offers an effective technique for individual identification of forensic samples and is much more efficient in the analysis of degraded DNA compared with standard STR typing.

Proteomics boosts translational and clinical microbiology

The application of proteomics to translational and clinical microbiology is one of the most advanced frontiers in the management and control of infectious diseases and in the understanding of complex microbial systems within human fluids and districts. This new approach aims at providing, by dedicated bioinformatic pipelines, a thorough description of pathogen proteomes and their interactions within the context of human host ecosystems, revolutionizing the vision of infectious diseases in biomedicine and approaching new viewpoints in both diagnostic and clinical management of the patient. Indeed, in the last few years, many laboratories have matured a series of advanced proteomic applications, aiming at providing individual proteome charts of pathogens, with respect to their morph and/or cell life stages, antimicrobial or antimycotic resistance profiling, epidemiological dispersion. Herein, we aim at reviewing the current state-of-the-art on proteomic protocols designed and set-up for translational and diagnostic microbiological purposes, from axenic pathogens' characterization to microbiota ecosystems' full description. The final goal is to describe applications of the most common MALDI-TOF MS platforms to advanced diagnostic issues related to emerging infections, increasing of fastidious bacteria, and generation of patient-tailored phylotypes. This article is part of a Special Issue entitled: Trends in Microbial Proteomics.

DprE1, a new taxonomic marker in mycobacteria

Among the species of the Mycobacterium genus, more than 50 have been recognized as human pathogens. In spite of the different diseases caused by mycobacteria, the interspecies genetic similarity ranges from 94% to 100%, and for some species, this value is higher than in other bacteria. Consequently, it is important to understand the relationships existing among mycobacterial species. In this context, the possibility to use Mycobacterium tuberculosis dprE1 gene as new phylogenetic/taxonomic marker has been explored. The dprE1 gene codes for the target of benzothiazinones, belonging to a very promising class of antitubercular drugs. Mutations in cysteine 387 of DprE1 are responsible for benzothiazinone resistance. The DprE1 tree, obtained with 73 amino acid sequences of mycobacterial species, revealed that concerning the benzothiazinone sensitivity/resistance, it is possible to discriminate two clusters. To validate it, a concatamer obtained from the amino acid sequences of nine mycobacterial housekeeping genes was performed. The concatamer revealed that there is no separation between the benzothiazinone-susceptible and benzothiazinone-resistant species; consequently, this parameter is not linked to the phylogeny. DprE1 tree might represent a good taxonomic marker for the assignment of a mycobacterial isolate to a species. Moreover, the concatamer represents a good reference phylogeny for the Mycobacterium genus.

Co-occurrence of amikacin-resistant and -susceptible Mycobacterium tuberculosis isolates in clinical samples from Beijing, China

OBJECTIVES

This study examined the phenomenon of heteroresistance in Mycobacterium tuberculosis clinical isolates obtained from retreated patients in Beijing, China between 2006 and 2011.

METHODS

The iPLEX Gold assay platform was used to determine the prevalence of heteroresistance to injectable second-line drugs (amikacin, kanamycin and capreomycin) in resistant isolates.

RESULTS

Heteroresistance was identified in 10.9% of 220 phenotypic amikacin-resistant isolates.

CONCLUSIONS

Heteroresistance was related mainly to the short duration and repeated use of amikacin and capreomycin during retreatment. These findings further our understanding of the evolution of resistance to injectable drugs used for tuberculosis treatment and help guide the rational use of injectable drugs during therapy.

Surveillance of bovine tuberculosis and risk estimation of a future reservoir formation in wildlife in Switzerland and Liechtenstein

Bovine tuberculosis (bTB) caused by Mycobacterium bovis or M. caprae has recently (re-) emerged in livestock and wildlife in all countries bordering Switzerland (CH) and the Principality of Liechtenstein (FL). Comprehensive data for Swiss and Liechtenstein wildlife are not available so far, although two native species, wild boar (Sus scrofa) and red deer (Cervus elaphus elaphus), act as bTB reservoirs elsewhere in continental Europe. Our aims were (1) to assess the occurrence of bTB in these wild ungulates in CH/FL and to reinforce scanning surveillance in all wild mammals; (2) to evaluate the risk of a future bTB reservoir formation in wild boar and red deer in CH/FL. Tissue samples collected from 2009 to 2011 from 434 hunted red deer and wild boar and from eight diseased ungulates with tuberculosis-like lesions were tested by direct real-time PCR and culture to detect mycobacteria of the Mycobacterium tuberculosis complex (MTBC). Identification of suspicious colonies was attempted by real-time PCR, genotyping and spoligotyping. Information on risk factors for bTB maintenance within wildlife populations was retrieved from the literature and the situation regarding identified factors was assessed for our study areas. Mycobacteria of the MTBC were detected in six out of 165 wild boar (3.6%; 95% CI: 1.4-7.8) but none of the 269 red deer (0%; 0-1.4). M. microti was identified in two MTBC-positive wild boar, while species identification remained unsuccessful in four cases. Main risk factors for bTB maintenance worldwide, including different causes of aggregation often resulting from intensive wildlife management, are largely absent in CH and FL. In conclusion, M. bovis and M. caprae were not detected but we report for the first time MTBC mycobacteria in Swiss wild boar. Present conditions seem unfavorable for a reservoir emergence, nevertheless increasing population numbers of wild ungulates and offal consumption may represent a risk.

Single nucleotide polymorphisms in Mycobacterium tuberculosis and the need for a curated database

Recent advances in DNA sequencing have led to the discovery of thousands of single nucleotide polymorphisms (SNPs) in clinical isolates of Mycobacterium tuberculosis complex (MTBC). This genetic variation has changed our understanding of the differences and phylogenetic relationships between strains. Many of these mutations can serve as phylogenetic markers for strain classification, while others cause drug resistance. Moreover, SNPs can affect the bacterial phenotype in various ways, which may have an impact on the outcome of tuberculosis (TB) infection and disease. Despite the importance of SNPs for our understanding of the diversity of MTBC populations, the research community currently lacks a comprehensive, well-curated and user-friendly database dedicated to SNP data. First attempts to catalogue and annotate SNPs in MTBC have been made, but more work is needed. In this review, we discuss the biological and epidemiological relevance of SNPs in MTBC. We then review some of the analytical challenges involved in processing SNP data, and end with a list of features, which should be included in a new SNP database for MTBC.

Highlights on molecular identification of closely related species

The term "complex" emerged in the literature at the beginning of the genomic era associated to taxonomy and grouping organisms that belong to different species but exhibited similar patterns according to their morphological, physiological and/or other phenotypic features. DNA-DNA hybridization values ~70% and high identity on 16S rRNA gene sequences were recommended for species delineation. Electrophoretic methods showed in some cases to be useful for species identification and population structure but the reproducibility was questionable. Later, the implementation of polyphasic approaches involving phenotypic and molecular methods brought new insights into the analysis of population structure and phylogeny of several "species complexes", allowing the identification of new closely related species. Likewise, the introduction of multilocus sequence typing and sequencing analysis of several genes offered an evolutionary perspective to the term "species complex". Several centres worldwide have recently released increasing genetic information on distinct microbial species. A brief review will be presented to highlight the definition of "species complex" for selected microorganisms, mainly the prokaryotic Acinetobacter calcoaceticus -Acinetobacter baumannii, Borrelia burgdorferi sensu lato, Burkholderia cepacia, Mycobacterium tuberculosis and Nocardia asteroides complexes, and the eukaryotic Aspergillus fumigatus, Leishmania donovani and Saccharomyces sensu stricto complexes. The members of these complexes may show distinct epidemiology, pathogenicity and susceptibility, turning critical their correct identification. Dynamics of prokaryotic and eukaryotic genomes can be very distinct and the term "species complex" should be carefully extended.

Two new rapid SNP-typing methods for classifying Mycobacterium tuberculosis complex into the main phylogenetic lineages

There is increasing evidence that strain variation in Mycobacterium tuberculosis complex (MTBC) might influence the outcome of tuberculosis infection and disease. To assess genotype-phenotype associations, phylogenetically robust molecular markers and appropriate genotyping tools are required. Most current genotyping methods for MTBC are based on mobile or repetitive DNA elements. Because these elements are prone to convergent evolution, the corresponding genotyping techniques are suboptimal for phylogenetic studies and strain classification. By contrast, single nucleotide polymorphisms (SNP) are ideal markers for classifying MTBC into phylogenetic lineages, as they exhibit very low degrees of homoplasy. In this study, we developed two complementary SNP-based genotyping methods to classify strains into the six main human-associated lineages of MTBC, the "Beijing" sublineage, and the clade comprising Mycobacterium bovis and Mycobacterium caprae. Phylogenetically informative SNPs were obtained from 22 MTBC whole-genome sequences. The first assay, referred to as MOL-PCR, is a ligation-dependent PCR with signal detection by fluorescent microspheres and a Luminex flow cytometer, which simultaneously interrogates eight SNPs. The second assay is based on six individual TaqMan real-time PCR assays for singleplex SNP-typing. We compared MOL-PCR and TaqMan results in two panels of clinical MTBC isolates. Both methods agreed fully when assigning 36 well-characterized strains into the main phylogenetic lineages. The sensitivity in allele-calling was 98.6% and 98.8% for MOL-PCR and TaqMan, respectively. Typing of an additional panel of 78 unknown clinical isolates revealed 99.2% and 100% sensitivity in allele-calling, respectively, and 100% agreement in lineage assignment between both methods. While MOL-PCR and TaqMan are both highly sensitive and specific, MOL-PCR is ideal for classification of isolates with no previous information, whereas TaqMan is faster for confirmation. Furthermore, both methods are rapid, flexible and comparably inexpensive.

[Proteomic applications in the Clinical Microbiology laboratory]

Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) is rapidly becoming a new routine resource in Clinical Microbiology laboratories. Its usefulness for bacterial identification is now generally accepted, although there is still some reluctance as regards specific bacterial groups and some other microorganisms, such as moulds. There are other potential applications of this technology in Clinical Microbiology, which are beginning to be developed. A review is presented on the current data on the identification of microorganisms, including the most problematic groups, such as mycobacteria, anaerobic bacteria and moulds. We also analyse its applications for direct sample identification, its impact on pathogenic characteristics of microorganisms, and its potential epidemiological applications. Finally, we review the studies published on its applications for determining antimicrobial susceptibility, and its applications on amplicons, instead of microorganism protein extracts.