Development and evaluation of a novel loop-mediated isothermal amplification method for rapid detection of severe acute respiratory syndrome coronavirus

Loop-Mediated Isothermal Amplification Assay Using Gold Nanoparticles for Detecting Treponema pallidum subspp. pallidum

BACKGROUND

Venereal syphilis in humans is caused by Trepenoma pallidum subspp. pallidum. A study has shown that 30,302 individuals in Thailand had syphilis in 2020, with a male-to-female ratio of 1:0.8 and the highest incidence rate at ages between fifteen and twenty-four.

METHODS

This research aimed to develop a loop-mediated isothermal amplification assay using gold nanoparticles (LAMP-AuNPs). Analytical sensitivity, diagnostic specificity, accuracy, and predictive values for each technique are provided.

RESULTS

The diagnosis sensitivities of polymerase chain reaction using agarose gel electrophoresis (PCR-AGE), loop-mediated isothermal amplification assay using agarose gel electrophoresis (LAMP-AGE), and LAMP-AuNPs were 116 ng/µL, 11.6 ng/µL, and 11.6 ng/µL, respectively. We evaluated the analytical specificity using PCR and a LAMP-based assay, and there was no cross-reactivity to Leptospira interrogans, Staphylococcus aureus, Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Acinetobacter baumannii, Pseudomonas aeruginosa, human immunodeficiency virus (HIV), and healthy humans. After analyzing 400 serum samples of patients suspected of syphilis, the LAMP-AGE and LAMP-AuNPs assays displayed 100% diagnostic sensitivity scores, 91% diagnostic specificity scores, 95.5% accuracy rates, 100% positive predictive values (PPVs), and 91% negative predictive values (NPVs), the positive likelihood ratio (LR+) was 11.11, while the negative likelihood ratio (LR-) was 0. Conversely, for PCR assays displayed 100% diagnostic sensitivity scores, 94.5% diagnostic specificity scores, 97.25% accuracy rates, 100% PPVs, and 94.5% NPVs, LR+ was 18.18, and LR- was 0.

CONCLUSIONS

The LAMP-AuNPs technique demonstrates rapidity, affordability, and convenience, rendering it well-suited for point-of-care applications in the diagnosis, prevention, and management of pathogenic infections.

Advancements in rapid diagnostics and genotyping of Piscirickettsia salmonis using Loop-mediated Isothermal Amplification

Introduction

Piscirickettsia salmonis, the causative agent of Piscirickettsiosis, poses a significant threat to the Chilean aquaculture industry, resulting in substantial economic losses annually. The pathogen, first identified as specie in 1992, this pathogen was divided into two genogroups: LF-89 and EM-90, associated with different phenotypic mortality and pathogenicity. Traditional genotyping methods, such as multiplex PCR, are effective but limited by their cost, equipment requirements, and the need for specialized expertise.

Methods

This study validates Loop-mediated Isothermal Amplification (LAMP) as a rapid and specific alternative for diagnosing P. salmonis infections. We developed the first qPCR and LAMP assay targeting the species-conserved tonB receptor gene (tonB-r, WP_016210144.1) for the specific species-level identification of P. salmonis. Additionally, we designed two genotyping LAMP assays to differentiate between the LF-89 and EM-90 genogroups, utilizing the unique coding sequences Nitronate monooxygenase (WP_144420689.1) for LF-89 and Acid phosphatase (WP_016210154.1) for EM-90.

Results

The LAMP assays demonstrated sensitivity and specificity comparable to real-time PCR, with additional benefits including rapid results, lower costs, and simplified operation, making them particularly suitable for field use. Specificity was confirmed by testing against other salmonid pathogens, such as Renibacterium salmoninarum, Vibrio ordalii, Flavobacterium psychrophilum, Tenacibaculum maritimum, and Aeromonas salmonicida, with no cross-reactivity observed.

Discussion

The visual detection method and precise differentiation between genogroups underscore LAMP's potential as a robust diagnostic tool for aquaculture. This advancement in the specie detection (qPCR and LAMP) and genotyping of P. salmonis represents a significant step forward in disease management within the aquaculture industry. The implementation of LAMP promises enhanced disease surveillance, early detection, and improved management strategies, ultimately benefiting the salmonid aquaculture sector.

Single-tube colorimetric loop-mediated isothermal amplification (LAMP) assay for high-sensitivity detection of SLCMV in cassava from southern India

Sri Lankan cassava mosaic virus (SLCMV) is a major cause for mosaic infections in cassava leaves, resulting in significant economic losses in southern India. SLCMV leads to growth retardation, leaf curl, and chlorosis in the host, with rapid transmission through whitefly insect vectors. Detecting SLCMV promptly is crucial, and the study introduces a novel and efficient colorimetric Loop-mediated isothermal amplification (LAMP) assay for successful detection in 60 min. Three primer sets were designed to target the conserved region of the SLCMV genome, specifically the coat protein gene, making the assay highly specific. The LAMP assay offers rapid and sensitive detection, completing within 60 min in a temperature-controlled water bath or thermal cycler. Compared to PCR techniques, it demonstrates 100 times superior sensitivity. The visual inspection of LAMP tube results using a nucleic acid dye and observing ladder-like pattern bands in a 2 % agarose gel confirms the presence of SLCMV. The assay is specific to SLCMV, showing no false positives or contaminations when tested against other virus. The standardized SLCMV LAMP assay proves technically efficient, providing a rapid, specific, simple, and low-cost solution, streamlining the detection and management of SLCMV.

Advances and Challenges in SARS-CoV-2 Detection: A Review of Molecular and Serological Technologies

The urgent need for accurate COVID-19 diagnostics has led to the development of various SARS-CoV-2 detection technologies. Real-time reverse transcriptase polymerase chain reaction (RT-qPCR) remains a reliable viral gene detection technique, while other molecular methods, including nucleic acid amplification techniques (NAATs) and isothermal amplification techniques, provide diverse and effective approaches. Serological assays, detecting antibodies in response to viral infection, are crucial for disease surveillance. Saliva-based immunoassays show promise for surveillance purposes. The efficiency of SARS-CoV-2 antibody detection varies, with IgM indicating recent exposure and IgG offering prolonged detectability. Various rapid tests, including lateral-flow immunoassays, present opportunities for quick diagnosis, but their clinical significance requires validation through further studies. Challenges include variations in specificity and sensitivity among testing platforms and evolving assay sensitivities over time. SARS-CoV-2 antigens, particularly the N and S proteins, play a crucial role in diagnostic methods. Innovative approaches, such as nanozyme-based assays and specific nucleotide aptamers, offer enhanced sensitivity and flexibility. In conclusion, ongoing advancements in SARS-CoV-2 detection methods contribute to the global effort in combating the COVID-19 pandemic.

Photochromic visual sensing chip for isothermal amplification detection of porcine transmissible gastroenteritis virus

The outbreak of transmissible gastroenteritis virus (TGEV) will cause huge economic losses to the whole pig industry. Hence, there is urgent need to develop a rapid and ultrasensitive method for detection of TGEV. As a nucleic acid detection technique, loop-mediated isothermal amplification (LAMP) can achieve quantitative detection of targeted nucleic acids with high sensitivity and selectivity. Nevertheless, the signal outputs of LAMP method must be acquired by complicated instruments. In this work, we firstly developed a LAMP photochromic sensing chip for porcine TGEV detection by combination of the photochromic sensing chip and nucleic acid amplification. The detection signal was based on color change of electrochromic material rather than electrical signal, and thus the detection signal can be obtained by visualization without relying on complicated instrument. The entire test was performed with small fluorinated indium tin oxide electrodes modified with zinc oxide (ZnO) (a photocatalytic material) and Prussian blue (PB) (an electrochromic material). When photoinduced electrons produced by ZnO were injected into PB under light, the PB was reduced to Prussian white. The higher the concentration of TGEV, the more double-stranded DNA was produced after amplification. The amplified product produced greater impedance, and fewer electron was transferred, which affect the corresponding color change of PB. The sensing chip also showed highly sensitive response to TGEV, with the minimum limit of detection was determined to be 2.5 fg/μL. The sensing chip developed herein will provide a new avenue for DNA amplification detection by visualization.

2-thiouridine is a broad-spectrum antiviral nucleoside analogue against positive-strand RNA viruses

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infections are causing significant morbidity and mortality worldwide. Furthermore, over 1 million cases of newly emerging or re-emerging viral infections, specifically dengue virus (DENV), are known to occur annually. Because no virus-specific and fully effective treatments against these or many other viruses have been approved, there is an urgent need for novel, effective therapeutic agents. Here, we identified 2-thiouridine (s2U) as a broad-spectrum antiviral ribonucleoside analogue that exhibited antiviral activity against several positive-sense single-stranded RNA (ssRNA+) viruses, such as DENV, SARS-CoV-2, and its variants of concern, including the currently circulating Omicron subvariants. s2U inhibits RNA synthesis catalyzed by viral RNA-dependent RNA polymerase, thereby reducing viral RNA replication, which improved the survival rate of mice infected with DENV2 or SARS-CoV-2 in our animal models. Our findings demonstrate that s2U is a potential broad-spectrum antiviral agent not only against DENV and SARS-CoV-2 but other ssRNA+ viruses.

Colorimetric RT-LAMP Detection of Multiple SARS-CoV-2 Variants and Lineages of Concern Direct from Nasopharyngeal Swab Samples without RNA Isolation

Since, during the Coronavirus disease 19 (COVID-19) pandemic, a large part of the human population has become infected, a rapid and simple diagnostic method has been necessary to detect its causative agent, the Severe Acute Respiratory Syndrome-related Coronavirus-2 (SARS-CoV-2), and control its spread. Thus, in the present study, we developed a colorimetric reverse transcription-loop-mediated isothermal amplification (RT-LAMP) kit that allows the detection of SARS-CoV-2 from nasopharyngeal swab samples without the need for RNA extraction. The kit utilizes three sets of LAMP primers targeting two regions of ORF1ab and one region in the E gene. The results are based on the colorimetric change of hydroxynaphthol blue, which allows visual interpretation without needing an expensive instrument. The kit demonstrated sensitivity to detect between 50 and 100 copies of the viral genome per reaction. The kit was authorized by the National Administration of Drugs, Food and Technology (ANMAT) of Argentina after validation using samples previously analyzed by the gold standard RT-qPCR. The results showed a sensitivity of 90.6% and specificity of 100%, consistent with conventional RT-qPCR. In silico analysis confirmed the recognition of SARS-CoV-2 variants of concern (B.1.1.7, B.1.351, P.1, B.1.617.2, B.1.427, and B.1.429), and lineages of the Omicron variant (B.1.1.529) with 100% homology. This rapid, simple, and sensitive RT-LAMP method paves the way for a large screening strategy to be carried out at locations lacking sophisticated instrumental and trained staff, as it particularly happens in regional hospitals and medical centers from rural areas.

Evaluation of A Simple DNA Extraction Method and Its Combination with Loop-Mediated Isothermal Amplification Assays for Rapid Plasmodium knowlesi Diagnosis

The initial and vital stage in the diagnosis of malaria involves extracting DNA. The efficiency of malaria testing is restricted by the multiple steps involved in commercial DNA extraction kits. We attempted to improve an existing loop-mediated isothermal amplification (LAMP) for the detection of Plasmodium knowlesi by using a simple DNA extraction approach, making it a feasible option for mass screening. We utilized a simple nucleic acid extraction method directly from whole blood for the detection of P. knowlesi, taking only 5 min to complete. The extracted DNA was evaluated by two fluorescent-based LAMP and one colorimetric-based LAMP assay. The detection limit for both SYTO-LAMP and SYBR green-LAMP was 0.00001% and 0.0001% parasitemia, respectively. Meanwhile, neutral red-LAMP had a detection limit of 0.01% parasitemia. Combining this simple and inexpensive DNA extraction method, SYTO-LAMP could serve as an alternative molecular diagnosis for the detection of P. knowlesi and other human Plasmodium spp.

Accuracy of a raw saliva-based COVID-19 RT-LAMP diagnostic assay

The Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) pandemic demanded rapid diagnosis to isolate new COVID-19 cases and prevent disease transmission. Quantitative Real-Time Polymerase Chain Reaction (qRT-PCR) rapidly became the gold standard for diagnosis. However, due to the high cost and delay of the results, other types of diagnosis were implemented, such as COVID-19 Ag Rapid Tests and Reverse Transcription Technique followed by Loop-Mediated isothermal Amplification (RT-LAMP). In this work, we validated the use of RT-LAMP in saliva samples rather than nasopharyngeal swabs, as the collection is more comfortable. First, we selected 5 primer sets based on the limit of detection for SARS-CoV-2 RNA, then validated their sensitivity and specificity in patient samples. A total of 117 samples were analyzed by fluorometric RT-LAMP and compared with qRT-PCR results. Our results show that the use of a high-sensitive primer ORF1-a, together with a low-sensitive primer set Gene E (time to threshold of 22.9 and 36.4 minutes, respectively, using 200 copies of viral RNA), achieved sensitivity in purified RNA from saliva samples of 95.2% (95% CI 76.1‒99.8) with 90.5% specificity (95% CI 69.6‒98.8) (n = 42).As RNA purification increases the turnaround time, we tested the outcome of RT-LAMP utilizing raw saliva samples without purification. The test achieved a sensitivity of 81.8% (95% CI 59.7‒94.8) and a specificity of 90.9% (95% CI 70.8‒98.8). As a result, the accuracy of 92.9% (95% CI 80.5‒98.5) in purified RNA-saliva samples was lowered to an acceptable level of 86.4% (95% CI 72.6‒94.8) in raw saliva. Although mass vaccination has been implemented, new strains and low vaccination progress helped to spread COVID-19. This study shows that it is feasible to track new COVID-19 cases in a large population with the use of raw saliva as sample in RT-LAMP assay which yields accurate results and offers a less invasive test.

SARS-CoV-2 Testing of Emergency Department Patients Using cobas® Liat® and eazyplex® Rapid Molecular Assays

Rapid testing for Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) of patients presenting to emergency departments (EDs) facilitates the decision for isolation on admission to hospital wards. Differences in the sensitivity of molecular assays have implications for diagnostic workflows. This study evaluated the performance of the cobas^® Liat^® RT-PCR, which is routinely used as the initial test for ED patients in our hospitals, compared with the eazyplex^® RT-LAMP. A total of 378 oropharyngeal and nasal swabs with positive Liat^® results were analysed. Residual sample aliquots were tested using NeuMoDx™, cobas^® RT-PCR, and the eazyplex^® assay. Patients were divided into asymptomatic (n = 157) and symptomatic (n = 221) groups according to the WHO case definition. Overall, 14% of positive Liat^® results were not confirmed by RT-PCR. These samples were mainly attributed to 26.8% of asymptomatic patients, compared to 3.8% of the symptomatic group. Therefore, positive Liat^® results were used to provisionally isolate patients in the ED until RT-PCR results were available. The eazyplex^® assay identified 62% and 90.6% of RT-PCR-confirmed cases in asymptomatic and symptomatic patients, respectively. False-negative eazyplex^® results were associated with RT-PCR Ct values > 30, and were more frequent in the asymptomatic group than in the symptomatic group (38.1% vs. 5.1%, respectively). Both the Liat^® and eazyplex^® assays are suitable for testing symptomatic patients. Their use in screening asymptomatic patients depends on the need to exclude any infection or identify those at high risk of transmission.

Rapid Detection of SARS-CoV-2 Based on the LAMP Assay Associated with the CRISPRCas12a System

BACKGROUND

The global public health system has been severely tested by the COVID-19 pandemic. Mass testing was essential in controlling the transmission of the SARS-CoV-2; however, its implementation has encountered challenges, particularly in low-income countries. The urgent need for rapid and accurate tests for SARS-CoV-2 has proven to be extremely important. Point-of-care tests using the CRISPR system for COVID-19 have shown promise, with a reported high sensitivity and rapid detection. The performance of a CRISPR-based SARS-CoV-2 testing system was reported in this study.

METHODS

A total of 29 nasopharyngeal samples were evaluated, including 23 samples from individuals suspected of COVID-19, and six samples positive for H3N2 or respiratory syncytial virus. Two reference samples with known concentrations of SARS-CoV-2 RNA (3000 RNA copies/mL) or viral titer determined by plaque assay (105 PFU/mL) were also evaluated. The LAMP technique was employed to amplify the ORF1ab gene and the results were analyzed using a Gemini XPS fluorescence reader.

RESULTS

The RT-LAMP-CRISPR/Cas12 assay showed 100% concordance compared to RT-PCR. The RT-PCR presented a detection limit of 0.01 PFU/mL and the CRISPR/Cas12 system showed a limit of 15.6 PFU/mL. The RT-PCR sensitivity was approximately 8 RNA copies/µL and CRISPR/Cas12 at 84 RNA copies/µL.

CONCLUSION

The RT-LAMP-CRISPR/Cas12a assay offered a promising alternative for the detection of SARS-CoV-2 and reinforces that CRISPR-based diagnostic techniques can be an alternative for fast and accurate assays.

A New Method to Detect Variants of SARS-CoV-2 Using Reverse Transcription Loop-Mediated Isothermal Amplification Combined with a Bioluminescent Assay in Real Time (RT-LAMP-BART)

Coronavirus disease 2019 (COVID-19) is caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), of which there are several variants. The three major variants (Alpha, Delta, and Omicron) carry the N501Y, L452R, and Q493R/Q498R mutations, respectively, in the S gene. Control of COVID-19 requires rapid and reliable detection of not only SARS-CoV-2 but also its variants. We previously developed a reverse transcription loop-mediated isothermal amplification assay combined with a bioluminescent assay in real time (RT-LAMP-BART) to detect the L452R mutation in the SARS-CoV-2 spike protein. In this study, we established LAMP primers and peptide nucleic acid probes to detect N501Y and Q493R/Q498R. The LAMP primer sets and PNA probes were designed for the N501Y and Q493R/Q498R mutations on the S gene of SARS-CoV-2. The specificities of RT-LAMP-BART assays were evaluated using five viral and four bacterial reference strains. The sensitivities of RT-LAMP-BART assays were evaluated using synthetic RNAs that included the target sequences, together with RNA-spiked clinical nasopharyngeal and salivary specimens. The results were compared with those of conventional real-time reverse transcription-polymerase chain reaction (RT-PCR) methods. The method correctly identified N501Y and Q493R/Q498R. Within 30 min, the RT-LAMP-BART assays detected up to 100-200 copies of the target genes; conventional real-time RT-PCR required 130 min and detected up to 500-3000 copies. Surprisingly, the real-time RT-PCR for N501Y did not detect the BA.1 and BA.2 variants (Omicron) that exhibited the N501Y mutation. The novel RT-LAMP-BART assay is highly specific and more sensitive than conventional real-time RT-PCR. The new assay is simple, inexpensive, and rapid; thus, it can be useful in efforts to identify SARS-CoV-2 variants of concern.

Multidimensional futuristic approaches to address the pandemics beyond COVID-19

Globally, the impact of the coronavirus disease 2019 (COVID-19) pandemic has been enormous and unrelenting with ∼6.9 million deaths and ∼765 million infections. This review mainly focuses on the recent advances and potentially novel molecular tools for viral diagnostics and therapeutics with far-reaching implications in managing the future pandemics. In addition to briefly highlighting the existing and recent methods of viral diagnostics, we propose a couple of potentially novel non-PCR-based methods for rapid, cost-effective, and single-step detection of nucleic acids of viruses using RNA mimics of green fluorescent protein (GFP) and nuclease-based approaches. We also highlight key innovations in miniaturized Lab-on-Chip (LoC) devices, which in combination with cyber-physical systems, could serve as ideal futuristic platforms for viral diagnosis and disease management. We also discuss underexplored and underutilized antiviral strategies, including ribozyme-mediated RNA-cleaving tools for targeting viral RNA, and recent advances in plant-based platforms for rapid, low-cost, and large-scale production and oral delivery of antiviral agents/vaccines. Lastly, we propose repurposing of the existing vaccines for newer applications with a major emphasis on Bacillus Calmette-Guérin (BCG)-based vaccine engineering.

Mechanisms, Techniques and Devices of Airborne Virus Detection: A Review

Airborne viruses, such as COVID-19, cause pandemics all over the world. Virus-containing particles produced by infected individuals are suspended in the air for extended periods, actually resulting in viral aerosols and the spread of infectious diseases. Aerosol collection and detection devices are essential for limiting the spread of airborne virus diseases. This review provides an overview of the primary mechanisms and enhancement techniques for collecting and detecting airborne viruses. Indoor virus detection strategies for scenarios with varying ventilations are also summarized based on the excellent performance of existing advanced comprehensive devices. This review provides guidance for the development of future aerosol detection devices and aids in the control of airborne transmission diseases, such as COVID-19, influenza and other airborne transmission viruses.

COVID-19 in early 2023: Structure, replication mechanism, variants of SARS-CoV-2, diagnostic tests, and vaccine & drug development studies

Coronavirus Disease-19 (COVID-19) is an infectious disease caused by severe acute respiratory syndrome-coronaviruses-2 (SARS-CoV-2), a highly pathogenic and transmissible coronavirus. Most cases of COVID-19 have mild to moderate symptoms, including cough, fever, myalgias, and headache. On the other hand, this coronavirus can lead to severe complications and death in some cases. Therefore, vaccination is the most effective tool to prevent and eradicate COVID-19 disease. Also, rapid and effective diagnostic tests are critical in identifying cases of COVID-19. The COVID-19 pandemic has a dynamic structure on the agenda and contains up-to-date developments. This article has comprehensively discussed the most up-to-date pandemic situation since it first appeared. For the first time, not only the structure, replication mechanism, and variants of SARS-CoV-2 (Alpha, Beta, Gamma, Omicron, Delta, Epsilon, Kappa, Mu, Eta, Zeta, Theta, lota, Lambda) but also all the details of the pandemic, such as how it came out, how it spread, current cases, what precautions should be taken, prevention strategies, the vaccines produced, the tests developed, and the drugs used are reviewed in every aspect. Herein, the comparison of diagnostic tests for SARS-CoV-2 in terms of procedure, accuracy, cost, and time has been presented. The mechanism, safety, efficacy, and effectiveness of COVID-19 vaccines against SARS-CoV-2 variants have been evaluated. Drug studies, therapeutic targets, various immunomodulators, and antiviral molecules applied to patients with COVID-19 have been reviewed.

RT-LAMP is a potential future molecular diagnostic tool for influenza A virus

Aim: Influenza A virus (IAV) causes serious illness and is responsible for significant morbidity and mortality. To diagnose IAV infection in its early stages, a quick, sensitive, precise detection method is needed for effective clinical management. Materials & methods: In-house hydroxylnaphthol blue (HNB)-based RT-LAMP assay for early detection of IAV using the HA gene was compared with RT-PCR/multiplex-RT-PCR. Results: For the reference strains of IAV, (H1N1 (A/Texas/50/2012) and H3N2 (A/Malaysia/2089302/2009)) RT-LAMP and RT-PCR/M-RT-PCR exhibited a limit of detection (LOD) of 10 and 100 fg/ml, respectively. Conclusion: HNB-based RT-LAMP is a rapid, sensitive, cost-effective diagnostic tool, and could be a point-of-care test for IAV patients during outbreaks.

Emerging Landscape of SARS-CoV-2 Variants and Detection Technologies

In 2019, a new coronavirus was identified that has caused significant morbidity and mortality worldwide. Like all RNA viruses, severe acute respiratory syndrome coronavirus 2 (SARS-Cov-2) evolves over time through random mutation resulting in genetic variations in the population. Although the currently approved coronavirus disease 2019 vaccines can be given to those over 5 years of age and older in most countries, strikingly, the number of people diagnosed positive for SARS-Cov-2 is still increasing. Therefore, to prevent and control this epidemic, early diagnosis of infected individuals is of great importance. The current detection of SARS-Cov-2 coronavirus variants are mainly based on reverse transcription-polymerase chain reaction. Although the sensitivity of reverse transcription-polymerase chain reaction is high, it has some disadvantages, for example, multiple temperature changes, long detection time, complicated operation, expensive instruments, and the need for professional personnel, which brings considerable inconvenience to the early diagnosis of this virus. This review comprehensively summarizes the development and application of various current detection technologies for novel coronaviruses, including isothermal amplification, CRISPR-Cas detection, serological detection, biosensor, ensemble, and microfluidic technology, along with next-generation sequencing. Those findings offer us a great potential to replace or combine with reverse transcription-polymerase chain reaction detection to achieve the purpose of allowing predictive diagnostics and targeted prevention of SARS-Cov-2 in the future.

COVID-19 surveillance in wastewater: An epidemiological tool for the monitoring of SARS-CoV-2

The coronavirus disease 2019 (COVID-19) pandemic has prompted a lot of questions globally regarding the range of information about the virus's possible routes of transmission, diagnostics, and therapeutic tools. Worldwide studies have pointed out the importance of monitoring and early surveillance techniques based on the identification of viral RNA in wastewater. These studies indicated the presence of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA in human feces, which is shed via excreta including mucus, feces, saliva, and sputum. Subsequently, they get dumped into wastewater, and their presence in wastewater provides a possibility of using it as a tool to help prevent and eradicate the virus. Its monitoring is still done in many regions worldwide and serves as an early "warning signal"; however, a lot of limitations of wastewater surveillance have also been identified.

Ultrasensitive Isothermal Detection of SARS-CoV-2 Based on Self-Priming Hairpin-Utilized Amplification of the G-Rich Sequence

The outbreak of the novel coronavirus disease 2019 (COVID-19) pandemic induced by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has caused millions of fatalities all over the world. Unquestionably, the effective and timely testing for infected individuals is the most imperative for the prevention of the ongoing pandemic. Herein, a new method was established for detecting SARS-CoV-2 based on the self-priming hairpin-utilized isothermal amplification of the G-rich sequence (SHIAG). In this strategy, the target RNA binding to the hairpin probe (HP) was uniquely devised to lead to the self-priming-mediated extension followed by the continuously repeated nicking and extension reactions, consequently generating abundant G-rich sequences from the intended reaction capable of producing fluorescence signals upon specifically interacting with thioflavin T (ThT). Based on the unique isothermal design concept, we successfully identified SARS-CoV-2 genomic RNA (gRNA) as low as 0.19 fM with excellent selectivity by applying only a single HP and further verified its practical diagnostic capability by reliably testing a total of 100 clinical specimens for COVID-19 with 100% clinical sensitivity and specificity. This study would provide notable insights into the design and evolution of new isothermal strategies for the sensitive and facile detection of SARS-CoV-2 under resource constraints.

CRISPR-Cas-Integrated LAMP

Pathogen-specific point-of-care (PoC) diagnostic tests have become an important need in the fight against infectious diseases and epidemics in recent years. PoC diagnostic tests are designed with the following parameters in mind: rapidity, accuracy, sensitivity, specificity, and ease of use. Molecular techniques are the gold standard for pathogen detection due to their accuracy and specificity. There are various limitations in adapting molecular diagnostic methods to PoC diagnostic tests. Efforts to overcome limitations are focused on the development of integrated molecular diagnostics by utilizing the latest technologies available to create the most successful PoC diagnostic platforms. With this point of view, a new generation technology was developed by combining loop-mediated isothermal amplification (LAMP) technology with clustered regularly interspaced short palindromic repeat (CRISPR)-associated (CRISPR-Cas) technology. This integrated approach benefits from the properties of LAMP technology, namely its high efficiency, short turnaround time, and the lack of need for a complex device. It also makes use of the programmable function of CRISPR-Cas technology and the collateral cleavage activity of certain Cas proteins that allow for convenient reporter detection. Thus, this combined technology enables the development of PoC diagnostic tests with high sensitivity, specificity, and ease of use without the need for complicated devices. In this review, we discuss the advantages and limitations of the CRISPR/Cas combined LAMP technology. We review current limitations to convert CRISPR combined LAMP into pathogen-specific PoC platforms. Furthermore, we point out the need to design more useful PoC platforms using microfabrication technologies by developing strategies that overcome the limitations of this new technology, reduce its complexity, and reduce the risk of contamination.

Development and standardization of a Loop-mediated isothermal amplification (LAMP) test for the detection of Babesia bigemina

Bovine babesiosis is a tick-borne disease caused by protozoan parasites of the genus Babesia. Babesia bigemina is one of the most prevalent and economically important parasite species that infects cattle because of its impact on the meat and milk production industry. Effective disease control strategies should include detection of reservoir animals and early and specific pathogen detection using rapid, economical, sensitive, and specific detection techniques. The loop-mediated isothermal amplification technique (LAMP) is a one-step molecular reaction that amplifies DNA sequences with high sensitivity and specificity under isothermal conditions and requires no special equipment. The results can be observed by the naked eye as color changes. The aim of this work was to develop and standardize the LAMP technique for B. bigemina detection and its visualization using hydroxynaphtol blue. For this situation, primers were designed from the conserved sequences of the B. bigemina ama-1 gene. The results showed that at 63 °C in 1 h and under standardized conditions, this technique could amplify B. bigemina DNA as indicated by the characteristic colorimetric change. Sensitivity evaluation indicated that DNA was amplified at a 0.00000001% parasitemia, and it was demonstrated that this technique specifically amplified the DNA of B. bigemina. Additionally, this technique could amplify DNA from 10 strains of B. bigemina from three different countries. It is concluded that the LAMP technique as modified in our case could specifically amplify B. bigemina DNA and shows high sensitivity, does not cross-react with related organisms, and the product is observed by 60 min of reaction time based on color changes. This report is the first LAMP report that uses sequences that are conserved between strains of the ama-1 gene, demonstrates the results by color changes using hydroxynaphtol blue. We propose LAMP as a rapid and economical alternative method for the molecular detection of B. bigemina.

Loop-Mediated Isothermal Amplification-Based Microfluidic Platforms for the Detection of Viral Infections

Purpose of Review

Easy-to-use, fast, and accurate virus detection method is essential for patient management and epidemic surveillance, especially during severe pandemics. Loop-mediated isothermal amplification (LAMP) on a microfluidic platform is suitable for detecting infectious viruses, regardless of the availability of medical resources. The purpose of this review is to introduce LAMP-based microfluidic devices for virus detection, including their detection principles, methods, and application.

Recent Findings

Facing the uncontrolled spread of viruses, the large-scale deployment of LAMP-based microfluidic platforms at the grassroots level can help expand the coverage of nucleic acid testing and shorten the time to obtain test reports. Microfluidic chip technology is highly integrated and miniaturized, enabling precise fluid control for effective virus detection. Performing LAMP on miniaturized systems can reduce analysis time, reagent consumption and risk of sample contamination, and improve analytical performance.

Summary

Compared to traditional benchtop protocols, LAMP-based microfluidic devices reduce the testing time, reagent consumption, and the risk of sample contamination. In addition to simultaneous detection of multiple target genes by special channel design, microfluidic chips can also integrate digital LAMP to achieve absolute quantification of target genes.

Automated sample-to-answer centrifugal microfluidic system for rapid molecular diagnostics of SARS-CoV-2

Testing for SARS-CoV-2 is one of the most important assets in COVID-19 management and mitigation. At the onset of the pandemic, SARS-CoV-2 testing was uniquely performed in central laboratories using RT-qPCR. RT-qPCR relies on trained personnel operating complex instrumentation, while time-to-result can be lengthy (e.g., 24 to 72 h). Now, two years into the pandemic, with the surge in cases driven by the highly transmissible Omicron variant, COVID-19 testing capabilities have been stretched to their limit worldwide. Rapid antigen tests are playing an increasingly important role in quelling outbreaks by expanding testing capacity outside the realm of clinical laboratories. These tests can be deployed in settings where repeat and rapid testing is essential, but they often come at the expense of limited accuracy and sensitivity. Reverse transcription loop-mediated isothermal amplification (RT-LAMP) provides a number of advantages to SARS-CoV-2 testing in standard laboratories and at the point-of-need. In contrast to RT-qPCR, RT-LAMP is performed at a constant temperature, which circumvents the need for thermal cycling and translates into a shorter analysis time (e.g., <1 h). In addition, RT-LAMP is compatible with colorimetric detection, facilitating visualization and read-out. However, even with these benefits, RT-LAMP is not yet clinically deployed at its full capacity. Lack of automation and integration of sample preparation, such as RNA extraction, limits the sensitivity and specificity of the method. Furthermore, the need for cold storage of reagents complicates its use at the point of need. The developments presented in this work address these limitations: We describe a fully automated SARS-CoV-2 detection method using RT-LAMP, which also includes up-front lysis and extraction of viral RNA, performed on a centrifugal platform with active pneumatic pumping, a disposable, all-polymer-based microfluidic cartridge and lyophilized reagents. We demonstrate that the limit of detection of the RT-LAMP assay itself is 0.2 copies per μL using N and E genes as target sequences. When combined with integrated RNA extraction, the assay sensitivity is 0.5 copies per μL, which is highly competitive to RT-qPCR. We tested the automated assay using 12 clinical swab specimens from patients and were able to distinguish positive and negative samples for SARS-CoV-2 within 60 min, thereby obtaining 100% agreement with RT-qPCR results.

CRISPR-based point-of-care diagnostics incorporating Cas9, Cas12, and Cas13 enzymes advanced for SARS-CoV-2 detection

An outbreak of the novel beta coronavirus severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) first came to light in December 2019, which has unfolded rapidly and turned out to be a global pandemic. Early prognosis of viral contamination involves speedy intervention, disorder control, and good-sized management of the spread of disease. Reverse transcription-polymerase chain reaction, considered the gold standard test for detecting nucleic acids and pathogen diagnosis, provides high sensitivity and specificity. However, reliance on high-priced equipped kits, associated reagents, and skilled personnel slow down sickness detection. Lately, the improvement of clustered regularly interspaced short palindromic repeat (CRISPR)-Cas (CRISPR-associated protein)-based diagnostic systems has reshaped molecular diagnosis due to their low cost, simplicity, speed, efficiency, high sensitivity, specificity, and versatility, which is vital for accomplishing point-of-care diagnostics. We reviewed and summarized CRISPR-Cas-based point-of-care diagnostic strategies and research in these paintings while highlighting their characteristics and challenges for identifying SARS-CoV-2.

Analytical performances of different diagnostic methods for SARS-CoV-2 virus - A review

Covid-19 is a dreadful pandemic of the 21st century that has created fear among people, affected the whole world, and taken thousands of lives. It infects the respiratory system and causes flu-type symptoms. According to the WHO reports, 2,082,745 deaths and 96,267,473 confirmed cases were perceived all around the globe till January 22, 2021. The significant roots of transmission are inhalation and direct contact with the infected surface. Its incubation period is 2-14 days and remains asymptomatic in most people. However, no treatment and vaccine are available for the people, so preventive measures like social distancing, wearing personal protective equipment (PPE), and frequent hand-washing are the practical and only options for cure. It has affected every sector of the world, whether it is trade or health all around the world. There is high demand for diagnostic tools as high-scale and expeditious testing is crucial for controlling disease spread; thus, detection methods play an essential role. Like flu, Covid-19 is also detected through RT-PCR, as the World Health Organization (WHO) suggested, but it is time taking and expensive method that many countries cannot afford. A vaccine is a crucial aspect of eradicating disease, and for SARS-CoV-2), plasma therapy and antibiotics therapy are used in the early spreading phase. The later stage involves forming a vaccine based on spike protein, N-protein, and whole-viral antigen that effectively immunizes the population worldwide until herd immunity can be achieved. In this review, we will discuss all possible and developed techniques for identifying SARS-CoV-2 and make a comparison of their specificity, selectivity, and cost; thus, we choose an appropriate method for fast, reliable, and pocket-friendly detection.

Development and evaluation of time-resolved fluorescent immunochromatographic assay for quantitative detection of SARS-CoV-2 spike antigen

BACKGROUND

The spread of COVID-19 worldwide caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has necessitated efficient, sensitive diagnostic methods to identify infected people. We report on the development of a rapid 15-minute time-resolved fluorescent (TRF) lateral flow immunochromatographic assay for the quantitative detection of the SARS-CoV-2 spike protein receptor-binding domain (S1-RBD).

OBJECTIVES

Our objective was to develop an efficient method of detecting SARS-CoV-2 within 15 min of sample collection.

METHODS

We constructed and evaluated a portable, disposable lateral flow device, which detected the S1-RBD protein directly in nasopharyngeal swab samples. The device emits a fluorescent signal in the presence of S1-RBD, which can be captured by an automated TRF instrument.

RESULTS

The TRF lateral flow assay signal was linear from 0 to 20 ng/ml and demonstrated high accuracy and reproducibility. When evaluated with clinical nasopharyngeal swabs, the assay was performed at >80% sensitivity, >84% specificity, and > 82% accuracy for detection of the S1-RBD antigen.

CONCLUSION

The new S1-RBD antigen test is a rapid (15 min), sensitive, and specific assay that requires minimal sample preparation. Critically, the assay correlated closely with PCR-based methodology in nasopharyngeal swab samples, showing that the detected S1-RBD antigen levels correlate with SARS-CoV-2 virus load. Therefore, the new TRF lateral flow test for S1-RBD has potential application in point-of-care settings.

Toward a next-generation diagnostic tool: A review on emerging isothermal nucleic acid amplification techniques for the detection of SARS-CoV-2 and other infectious viruses

As the COVID-19 pandemic continues to affect human health across the globe rapid, simple, point-of-care (POC) diagnosis of infectious viruses such as SARS-CoV-2 remains challenging. Polymerase chain reaction (PCR)-based diagnosis has risen to meet these demands and despite its high-throughput and accuracy, it has failed to gain traction in the rapid, low-cost, point-of-test settings. In contrast, different emerging isothermal amplification-based detection methods show promise in the rapid point-of-test market. In this comprehensive study of the literature, several promising isothermal amplification methods for the detection of SARS-CoV-2 are critically reviewed that can also be applied to other infectious viruses detection. Starting with a brief discussion on the SARS-CoV-2 structure, its genomic features, and the epidemiology of the current pandemic, this review focuses on different emerging isothermal methods and their advancement. The potential of isothermal amplification combined with the revolutionary CRISPR/Cas system for a more powerful detection tool is also critically reviewed. Additionally, the commercial success of several isothermal methods in the pandemic are highlighted. Different variants of SARS-CoV-2 and their implication on isothermal amplifications are also discussed. Furthermore, three most crucial aspects in achieving a simple, fast, and multiplexable platform are addressed.

Microfluidics-Based Point-of-Care Testing (POCT) Devices in Dealing with Waves of COVID-19 Pandemic: The Emerging Solution

Recent advances in microfluidics-based point-of-care testing (POCT) technology such as paper, array, and beads have shown promising results for diagnosing various infectious diseases. The fast and timely detection of viral infection has proven to be a critical step for deciding the therapeutic outcome in the current COVID-19 pandemic, which in turn not only enhances the patient survival rate but also reduces the disease-associated comorbidities. In the present scenario, rapid, noninvasive detection of the virus using low cost and high throughput microfluidics-based POCT devices embraces the advantages over existing diagnostic technologies, for which a centralized lab facility, expensive instruments, sample pretreatment, and skilled personnel are required. Microfluidic-based multiplexed POCT devices can be a boon for clinical diagnosis in developing countries that lacks a centralized health care system and resources. The microfluidic devices can be used for disease diagnosis and exploited for the development and testing of drug efficacy for disease treatment in model systems. The havoc created by the second wave of COVID-19 led several countries' governments to the back front. The lack of diagnostic kits, medical devices, and human resources created a huge demand for a technology that can be remotely operated with single touch and data that can be analyzed on a phone. Recent advancements in information technology and the use of smartphones led to a paradigm shift in the development of diagnostic devices, which can be explored to deal with the current pandemic situation. This review sheds light on various approaches for the development of cost-effective microfluidics POCT devices. The successfully used microfluidic devices for COVID-19 detection under clinical settings along with their pros and cons have been discussed here. Further, the integration of microfluidic devices with smartphones and wireless network systems using the Internet-of-things will enable readers for manufacturing advanced POCT devices for remote disease management in low resource settings.

Discovery of S-217622, a Noncovalent Oral SARS-CoV-2 3CL Protease Inhibitor Clinical Candidate for Treating COVID-19

The coronavirus disease 2019 (COVID-19) pandemic, caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has resulted in millions of deaths and threatens public health and safety. Despite the rapid global spread of COVID-19 vaccines, effective oral antiviral drugs are urgently needed. Here, we describe the discovery of S-217622, the first oral noncovalent, nonpeptidic SARS-CoV-2 3CL protease inhibitor clinical candidate. S-217622 was discovered via virtual screening followed by biological screening of an in-house compound library, and optimization of the hit compound using a structure-based drug design strategy. S-217622 exhibited antiviral activity in vitro against current outbreaking SARS-CoV-2 variants and showed favorable pharmacokinetic profiles in vivo for once-daily oral dosing. Furthermore, S-217622 dose-dependently inhibited intrapulmonary replication of SARS-CoV-2 in mice, indicating that this novel noncovalent inhibitor could be a potential oral agent for treating COVID-19.

A fast extraction-free isothermal LAMP assay for detection of SARS-CoV-2 with potential use in resource-limited settings

Background

To retain the spread of SARS-CoV-2, fast, sensitive and cost-effective testing is essential, particularly in resource limited settings (RLS). Current standard nucleic acid-based RT-PCR assays, although highly sensitive and specific, require transportation of samples to specialised laboratories, trained staff and expensive reagents. The latter are often not readily available in low- and middle-income countries and this may significantly impact on the successful disease management in these settings. Various studies have suggested a SARS-CoV-2 loop mediated isothermal amplification (LAMP) assay as an alternative method to RT-PCR.

Methods

Four previously published primer pairs were used for detection of SARS-CoV-2 in the LAMP assay. To determine optimal conditions, different temperatures, sample input and incubation times were tested. Ninety-three extracted RNA samples from St. George's Hospital, London, 10 non-extracted nasopharyngeal swab samples from Great Ormond Street Hospital for Children, London, and 92 non-extracted samples from Queen Elisabeth Central Hospital (QECH), Malawi, which have previously been tested for SARS-Cov-2 by quantitative reverse-transcription RealTime PCR (qRT-PCR), were analysed in the LAMP assay.

Results

In this study we report the optimisation of an extraction-free colourimetric SARS-CoV-2 LAMP assay and demonstrated that a lower limit of detection (LOD) between 10 and 100 copies/µL of SARS-CoV-2 could be readily detected by a colour change of the reaction within as little as 30 min. We further show that this assay could be quickly established in Malawi, as no expensive equipment is necessary. We tested 92 clinical samples from QECH and showed the sensitivity and specificity of the assay to be 86.7% and 98.4%, respectively. Some viral transport media, used routinely to stabilise RNA in clinical samples during transportation, caused a non-specific colour-change in the LAMP reaction and therefore we suggest collecting samples in phosphate buffered saline (which did not affect the colour) as the assay allows immediate sample analysis on-site.

Conclusion

SARS-CoV-2 LAMP is a cheap and reliable assay that can be readily employed in RLS to improve disease monitoring and management.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12985-022-01800-7.

eDNA-based detection of the invasive crayfish Pacifastacus leniusculus in streams with a LAMP assay using dependent replicates to gain higher sensitivity

LAMP assays are becoming increasingly popular in the field of invasive species detection but are still underused in eDNA-based monitoring. Here, we propose a LAMP assay designed to detect the North American crayfish species Pacifastacus leniusculus in water samples from streams. The presence of P. leniusculus was detected through this new LAMP assay in all but one of the nine sites sampled. No correlation was found between ddPCR absolute concentration measurements and the number of LAMP-positive technical replicates. However, we showed that using dependent technical replicates could significantly enhance the detection sensitivity of the LAMP assay. Applied to other assays, it could improve sensitivity and thus allow for a more efficient use of eDNA-based LAMP assays for invasive species detection in aquatic ecosystems.

A point-of-care SARS-CoV-2 test based on reverse transcription loop-mediated isothermal amplification without RNA extraction with diagnostic performance same as RT-PCR

The global public health crisis and economic losses resulting from the current novel coronavirus disease (COVID-19) pandemic have been dire. The most used real-time reverse transcription polymerase chain reaction (RT-PCR) method needs expensive equipment, technical expertise, and a long turnaround time. Therefore, there is a need for a rapid, accurate, and alternative technique of diagnosis that is deployable at resource-poor settings like point-of-care. This study combines heat deactivation and a novel mechanical lysis method by bead beating for quick and simple sample preparation. Then, using an optimized reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay to target genes encoding the open reading frame 8 (ORF8), spike and nucleocapsid proteins of the novel coronavirus, SARS-CoV-2. The test results can be read simultaneously in fluorometric and colorimetric readouts within 40 min from sample collection. We also calibrated a template transfer tool to simplify sample addition into LAMP reactions when pipetting skills are needed. Most importantly, validation of the direct RT-LAMP system based on multiplexing primers S1:ORF8 in a ratio (1:0.8) using 143 patients' nasopharyngeal swab samples showed a diagnostic performance of 99.30% accuracy, with 98.81% sensitivity and 100% selectivity, compared to commercial RT-PCR kits. Since our workflow does not rely on RNA extraction and purification, the time-to-result is two times faster than other workflows with FDA emergency use authorization. Considering all its strengths: speed, simplicity, accuracy and extraction-free, the system can be useful for optimal point-of-care testing of COVID-19.

Three SARS-CoV-2 PCR-negative cases of COVID-19 diagnosed using isothermal amplification methods

Coronavirus disease (COVID-19) is a viral disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). SARS-CoV-2 can be detected by polymerase chain reaction (PCR) and isothermal nucleic acid amplification tests, including loop-mediated isothermal amplification (LAMP) and nicking endonuclease amplification reaction (NEAR) tests. Although PCR is the most sensitive and specific method and is generally considered to be the gold standard, it is time-consuming and costly. Isothermal nucleic acid amplification tests have lower sensitivity and specificity than PCR, but are less time-consuming and costly. We encountered three cases of SARS-CoV-2 infection in which the isothermal amplification test was positive but the PCR test was negative on the day of admission; however, the PCR test was positive the next day. These cases showed that some COVID-19 patients can test negative by PCR but positive using isothermal nucleic acid amplification methods. As PCR tests have the possibility of false-negative results, tests that use isothermal amplification methods which can be performed in a shorter time and at a lower cost than PCR tests, may be able to diagnose patients who have false negative PCR results.

Rapid and Reliable Detection of SARS-CoV-2 Using Direct RT-LAMP

Background: The global pandemic coronavirus SARS-CoV-2 has a healthcare, social and economic burden. To limit the spread of the virus, the World Health Organization (WHO) urgently called for extensive screening of suspected individuals; thus, a quick, simple, and sensitive diagnostic assay is always in need. Methods: We applied reverse transcription-loop-mediated isothermal amplification (RT-LAMP) for the detection of SARS-CoV-2. The RT-LAMP method was optimized by evaluating two fluorescence amplification mixes and several reaction times, and results were compared to the standard real-time RT-PCR (rtRT-PCR). The assay was validated using 200 nasopharyngeal swabs collected in viral transport media (62 positive for SARS-CoV-2, and 138 negative for SARS-CoV-2 detected by the rtRT-PCR method). The samples were diluted 1:4 in diethylpyrocarbonate (DEPC)-treated water, utilized for RT-LAMP using different singleplex and multiplex sets of LAMP primers (N gene, S gene, and orf1ab gene), and incubated at 65 °C using real-time PCR 7500. Results: Our direct detection with the RT-LAMP protocol showed 100% concordance (sensitivity and specificity) with the standard protocol used for the detection of SARS-CoV-2 nucleic acid. Conclusions: In this study, we set up a rapid, simple, and sensitive RT-LAMP assay for the detection of SARS-CoV-2 in clinical samples. The assay is suitable for point of care detection in public hospitals, medical centers in rural areas, and in transportation hubs.

Molecular characterization of strawberry vein banding virus from China and the development of loop‑mediated isothermal amplification assays for their detection

Strawberry vein banding virus (SVBV) is one of the serious viral pathogens infecting strawberry worldwide. To understand the molecular characterization of SVBV from China, complete genome sequences of sixteen SVBV isolates were cloned and sequenced. Sequence comparison showed they shared high nucleotide sequence identity (93.6–99.5%) with isolates from China and Japan (96.6–98.4%), while relatively low identity with the isolates from Canada (91.9–93.7%) and USA (85.5–85.9%). Phylogenetic analyses based on the complete genome sequence or coat protein (CP) gene showed the SVBV isolates clustered into three clades correlated with geographic distribution. Recombination analyses identified 13 recombinants and 21 recombinant events, indicating frequent and multiple recombinations in SVBV evolution. Furthermore, a sensitive loop-mediated isothermal amplification (LAMP) method was developed for rapid detection of SVBV isolates, which could be especially suitable for seedling propagation, virus-free culture and routine diagnostics in field investigation. This study offers new understanding of the molecular evolution and may help to improve the management of SVBV.

Detection of SARS-CoV-2 and the L452R spike mutation using reverse transcription loop-mediated isothermal amplification plus bioluminescent assay in real-time (RT-LAMP-BART)

The new coronavirus infection (COVID-19) caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can be fatal, and several variants of SARS-CoV-2 with mutations of the receptor-binding domain (RBD) have increased avidity for human cell receptors. A single missense mutation of U to G at nucleotide position 1355 (U1355G) in the spike (S) gene changes leucine to arginine (L452R) in the spike protein. This mutation has been observed in the India and California strains (B.1.617 and B.1.427/B.1.429, respectively). Control of COVID-19 requires rapid and reliable detection of SARS-CoV-2. Therefore, we established a reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay plus a bioluminescent assay in real-time (BART) to detect SARS-CoV-2 and the L452R spike mutation. The specificity and sensitivity of the RT-LAMP-BART assay was evaluated using synthetic RNAs including target sequences and RNA-spiked clinical nasopharyngeal and saliva specimens as well as reference strains representing five viral and four bacterial pathogens. The novel RT-LAMP-BART assay to detect SARS-CoV-2 was highly specific compared to the conventional real-time RT-PCR. Within 25 min, the RT-LAMP-BART assay detected 80 copies of the target gene in a sample, whereas the conventional real-time RT-PCR method detected 5 copies per reaction within 130 min. Using RNA-spiked specimens, the sensitivity of the RT-LAMP-BART assay was slightly attenuated compared to purified RNA as a template. The results were identical to those of the conventional real-time RT-PCR method. Furthermore, using a peptide nucleic acid (PNA) probe, the RT-LAMP-BART method correctly identified the L452R spike mutation. This is the first report describes RT-LAMP-BART as a simple, inexpensive, rapid, and useful assay for detection of SARS-CoV-2, its variants of concern, and for screening of COVID-19.

Development of loop-mediated isothermal amplification-lateral flow dipstick as a rapid screening test for detecting Listeria monocytogenes in frozen food products using a specific region on the ferrous iron transport protein B gene

Background and Aim: Listeria monocytogenes is a critical foodborne pathogen that infects pregnant females and their newborns and older adults and individuals with comorbidities. It contaminates fresh vegetables, fruits, ready-to-eat foods, and frozen food products consumed by individuals. The culture conventional detection methods for L. monocytogenes are time-consuming, taking 4 days. This study aimed to describe the development and comparison of loop-mediated isothermal amplification (LAMP)- lateral flow dipstick (LFD), LAMP assay to PCR, and conventional culture for detecting L. monocytogenes in frozen food products. Materials and Methods: Five LAMP primer sets, including F3, B3, forward inner primer, and backward inner primer, were designed from a specific region on ferrous iron transport protein B gene (feoB gene) to amplify LAMP products. The DNA probe was created, and the detection limit was determined in pure culture and purified DNA, as well as the detection in 20 frozen food product samples. Results: The LMfeoB4 LAMP primer sets and DNA probe were LAMP products amplified at 60°C for 50 min. The specificity of the assay revealed no cross-reactivity with other pathogenic bacteria. The limit of detection (LOD) of the LAMP-LFD and LAMP assays using purified genomic DNA was 219 fg/μL both in LAMP and LAMP-LFD assays. The LOD of LAMP and LAMP-LFD assays in pure culture was 4.3×102 colony-forming unit (CFU)/mL and 43 CFU/mL, respectively. The LOD of the LAMP-LFD assay using artificially inoculated chicken in frozen food samples with pre-enrichment was 3.2×102 CFU/mL. The LAMP-LFD was also more sensitive than the LAMP assay and polymerase chain reaction. Finally, LAMP-LFD revealed no false positives in any of the 20 frozen food product samples. Conclusion: LAMP-LFD assay using a specific region on the feoB gene to detect L. monocytogenes was highly specific, sensitive, faster, and convenient, making it a valuable tool for the monitoring and rapid screening of L. monocytogenes in frozen food products. This technique is applicable to the development of detection technologies for other pathogens in food products.

Recent Developments in Isothermal Amplification Methods for the Detection of Foodborne Viruses

Foodborne and enteric viruses continue to impose a significant public health and economic burden globally. As many of these viruses are highly transmissible, the ability to detect them portably, sensitively, and rapidly is critical to reduce their spread. Although still considered a gold standard for detection of these viruses, real time polymerase chain reaction (PCR)-based technologies have limitations such as limited portability, need for extensive sample processing/extraction, and long time to result. In particular, the limitations related to the susceptibility of real time PCR methods to potential inhibitory substances present in food and environmental samples is a continuing challenge, as the need for extensive nucleic acid purification prior to their use compromises the portability and rapidity of such methods. Isothermal amplification methods have been the subject of much investigation for these viruses, as these techniques have been found to be comparable to or better than established PCR-based methods in portability, sensitivity, specificity, rapidity, and simplicity of sample processing. The purpose of this review is to survey and compare reports of these isothermal amplification methods developed for foodborne and enteric viruses, with a special focus on the performance of these methods in the presence of complex matrices.

Comprehensive Review on Rapid Diagnosis of New Infection COVID-19

Generally, rapid detection of viral infection is necessary for preventing the virus from spreading among people in a society as a pandemic. Although there are many effective standard techniques used for virus identification, they are laborious, required skilled person to handle and time-consuming. Particularly, the detection of viral infection involved in the isolation and nucleic acid detection by collecting specimens (sample) from the appropriate sites. For instance, oral or nasal swab, nasopharyngeal or tracheal extract, lung tissue, blood, sputum and feces are collected in order to investigate the pandemic, COVID-19 for the effective and rapid diagnosis and eventually for the treatment. In this mini-review, it is summarized that the advanced testing methods which include RNA, immunologic and radiological based tests that could be used to detect COVID-19 and their cost, reliability and functionality are discussed in this review. This mini-review might help the researcher and health care sector to plan the diagnostic procedures as per the severity of the new infection, COVID-19.

Outbreak of COVID-19: A Detailed Overview and Its Consequences

INTRODUCTION

After the outbreak from Wuhan City of China, COVID-19, caused by SARS-CoV-2, has become a pandemic worldwide in a very short span of time. The high transmission rate and pathogenicity of this virus have made COVID-19 a major public health concern globally. Basically, the emergence of SARS-CoV-2 is the third introduction of a highly infectious human epidemic coronavirus in the twenty-first century. Various research groups have claimed bats to be the natural host of SARS-CoV-2. However, the intermediate host and mode of transmission from bat to humans are not revealed yet. The COVID-19 cost hundreds and thousands of lives and millions are facing the consequences. The objective of this chapter was to analyze the outbreak of COVID-19 and problems faced globally.

METHODS

All published relevant literature from scientific sources and reputed news channels are considered to write the current review.

RESULTS

Generally, elder persons and more particularly people with underlying medical conditions are found to be highly vulnerable to severe infection and prone to fatal outcomes. Unfortunately, there is no specific treatment with clinically approved drugs or vaccines to treat this disease. Several research groups have been investigating the efficacies of several antiviral and repurposed drugs. Currently, most of the SARS-COV-2 vaccines are at the preclinical or clinical stage of development. The latest research progress on the epidemiology, clinical characteristics, pathogenesis, diagnosis, and current status of therapeutic intervention indicates that still a specific drug or vaccine needs to come up for the effective treatment of the pandemic COVID-19. It is observed that various aspects of social life, economic status, and healthcare systems are majorly affected by this pandemic.

CONCLUSION

It is concluded that the outbreak of COVID-19 has severely affected each and every field, such as social, scientific, industrial, transport, and medical sectors. Irrespective of tremendous efforts globally, few vaccines are now available for the prevention of the disease. Specific drug is not available publicly for the treatment of COVID-19. Prevention of air pollution that can aggravate COVID-19 has been suggested. Therefore, as of now, social distancing and sanitization practices are the only options available for the prevention of the disease for many.

Diagnostic Host Gene Expression Analysis by Quantitative Reverse Transcription Loop-Mediated Isothermal Amplification to Discriminate between Bacterial and Viral Infections

BACKGROUND

Early and accurate diagnosis of acute infections can help minimize the overprescription of antibiotics and improve patient outcomes. Discrimination between bacterial and viral etiologies in acute infection based on changes in host gene expression has been described. Unfortunately, established technologies used for gene expression profiling are typically expensive and slow, confounding integration into clinical workflows. Here we report the development of an ultra-rapid test system for host gene expression profiling from blood based on quantitative reverse transcription followed by loop-mediated isothermal amplification (qRT-LAMP).

METHODS

We developed 10 messenger ribonucleic acid-specific assays based on qRT-LAMP targeting 7 informative biomarkers to discriminate viral from bacterial infections and 3 housekeeping reference genes. We optimized qRT-LAMP formulations to achieve a turnaround time of 12 min without sacrificing specificity or precision. The accuracy of the test system was verified utilizing blood samples from 57 patients and comparing qRT-LAMP results to profiles obtained using an orthogonal reference technology.

RESULTS

We observed a Pearson coefficient of 0.90 between bacterial/viral metascores generated by qRT-LAMP and the reference technology.

CONCLUSIONS

qRT-LAMP assays can provide sufficiently accurate gene expression profiling data to enable discrimination between bacterial and viral etiologies using an established set of biomarkers and a classification algorithm.

Viral outbreaks detection and surveillance using wastewater-based epidemiology, viral air sampling, and machine learning techniques: A comprehensive review and outlook

A viral outbreak is a global challenge that affects public health and safety. The coronavirus disease 2019 (COVID-19) has been spreading globally, affecting millions of people worldwide, and led to significant loss of lives and deterioration of the global economy. The current adverse effects caused by the COVID-19 pandemic demands finding new detection methods for future viral outbreaks. The environment's transmission pathways include and are not limited to air, surface water, and wastewater environments. The wastewater surveillance, known as wastewater-based epidemiology (WBE), can potentially monitor viral outbreaks and provide a complementary clinical testing method. Another investigated outbreak surveillance technique that has not been yet implemented in a sufficient number of studies is the surveillance of Severe Acute Respiratory Syndrome Coronavirus-2 (SARS-CoV-2) in the air. Artificial intelligence (AI) and its related machine learning (ML) and deep learning (DL) technologies are currently emerging techniques for detecting viral outbreaks using global data. To date, there are no reports that illustrate the potential of using WBE with AI to detect viral outbreaks. This study investigates the transmission pathways of SARS-CoV-2 in the environment and provides current updates on the surveillance of viral outbreaks using WBE, viral air sampling, and AI. It also proposes a novel framework based on an ensemble of ML and DL algorithms to provide a beneficial supportive tool for decision-makers. The framework exploits available data from reliable sources to discover meaningful insights and knowledge that allows researchers and practitioners to build efficient methods and protocols that accurately monitor and detect viral outbreaks. The proposed framework could provide early detection of viruses, forecast risk maps and vulnerable areas, and estimate the number of infected citizens.

Reverse Transcription Loop-Mediated Isothermal Amplification (RT-LAMP) at the Service of Viroid Detection

A wide range of nucleic acid-based detection methods is available for viroid diagnosis. In this chapter, we describe a novel reverse transcription loop-mediated isothermal amplification (RT-LAMP). The technique involves the use of nucleic acids, plant sap, or even traces of plant tissue. Adding a set of four to six primers, Bst DNA polymerase, AMV, or another thermostable reverse transcriptase, allows the fast detection of RNA targets like viroids after a short (20-40 min) incubation at 63 °C either in an open or close-tube system.

Testing and diagnosis of SARS-CoV-2 infection

The recent outbreak of the coronavirus disease 2019 (COVID-19) has rapidly spread around the world since its discovery in China, in December 2019. The current standard method for determining whether a patient is infected with the SARS-CoV-2 virus involves taking a nasal or throat swab sample, which is then sent to laboratories for testing. The laboratories then use polymerase chain reaction (PCR)-based technology on respiratory specimens remain the gold standard to determine if the genetic material of the virus is present in the sample and use this information to diagnose the patient. However, serologic immunoassays and point-of-care technologies are rapidly emerging with high specificity and sensitivity as well. Even if there are excellent techniques for diagnosing symptomatic patients with COVID-19 in equipped laboratories, critical gaps still exist in the screening of asymptomatic individuals who are in the incubation phase of the virus, as well as in the accurate determination of live virus shedding during convalescence to inform decisions for ending isolation.

Loop-Mediated Isothermal Amplification (LAMP) as a Promising Point-of-Care Diagnostic Strategy in Avian Virus Research

Simple Summary

Many of the existing screening methods of avian viruses depend on clinical symptoms and pathological gross examinations that still necessitate confirmatory microscopic testing. Confirmation of a virus is often conducted at centralized laboratories that are well-equipped with instruments for virus isolation, hemagglutinin inhibition, virus neutralization, ELISA, PCR and qPCR. These assays are known for their great accuracy and sensitivity, and hence are set as standard practices. Nevertheless, limitations arise due to the time, cost and on-site applicability. As the technology progresses, molecular diagnostics should be more accessible to isolated areas and even practicable for use by non-skilled personnel such as farmers and private breeders. One of the point-of-care diagnostic strategies to consider for such matters is loop-mediated isothermal amplification (LAMP).

Abstract

Over the years, development of molecular diagnostics has evolved significantly in the detection of pathogens within humans and their surroundings. Researchers have discovered new species and strains of viruses, while mitigating the viral infections that occur, owing to the accessibility of nucleic acid screening methods such as polymerase chain reaction (PCR), quantitative (real-time) polymerase chain reaction (qPCR) and reverse-transcription qPCR (RT-qPCR). While such molecular detection methods are widely utilized as the benchmark, the invention of isothermal amplifications has also emerged as a reliable tool to improvise on-field diagnosis without dependence on thermocyclers. Among the established isothermal amplification technologies are loop-mediated isothermal amplification (LAMP), recombinant polymerase amplification (RPA), strand displacement activity (SDA), nucleic acid sequence-based amplification (NASBA), helicase-dependent amplification (HDA) and rolling circle amplification (RCA). This review highlights the past research on and future prospects of LAMP, its principles and applications as a promising point-of-care diagnostic method against avian viruses.

Viral Respiratory Infections: New Tools for a Rapid Diagnosis

Respiratory tract infection is one of the most common diseases in human worldwide. Many viruses are implicated in these infections, including emerging viruses, such as the novel coronavirus, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Identification of the causative viral pathogens of respiratory tract infections is important to select a correct management of patients, choose an appropriate treatment, and avoid unnecessary antibiotics use. Different diagnostic approaches present variable performance in terms of accuracy, sensitivity, specificity, and time-to-result, that have to be acknowledged to be able to choose the right diagnostic test at the right time, in the right patient. This review describes currently available rapid diagnostic strategies and syndromic approaches for the detection of viruses commonly responsible for respiratory diseases.

Comprehensive analyses of bioinformatics applications in the fight against COVID-19 pandemic

Novel coronavirus disease 2019 (COVID-19) is a global pandemic caused by severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2), which can be transmitted from person to person. As of September 21, 2021, over 228 million cases were diagnosed as COVID-19 infection in more than 200 countries and regions worldwide. The death toll is more than 4.69 million and the mortality rate has reached about 2.05% as it has gradually become a global plague, and the numbers are growing. Therefore, it is important to gain a deeper understanding of the genome and protein characteristics, clinical diagnostics, pathogenic mechanisms, and the development of antiviral drugs and vaccines against the novel coronavirus to deal with the COVID-19 pandemic. The traditional biology technologies are limited for COVID-19-related studies to understand the pandemic happening. Bioinformatics is the application of computational methods and analytical tools in the field of biological research which has obvious advantages in predicting the structure, product, function, and evolution of unknown genes and proteins, and in screening drugs and vaccines from a large amount of sequence information. Here, we comprehensively summarized several of the most important methods and applications relating to COVID-19 based on currently available reports of bioinformatics technologies, focusing on future research for overcoming the virus pandemic. Based on the next-generation sequencing (NGS) and third-generation sequencing (TGS) technology, not only virus can be detected, but also high quality SARS-CoV-2 genome could be obtained quickly. The emergence of data of genome sequences, variants, haplotypes of SARS-CoV-2 help us to understand genome and protein structure, variant calling, mutation, and other biological characteristics. After sequencing alignment and phylogenetic analysis, the bat may be the natural host of the novel coronavirus. Single-cell RNA sequencing provide abundant resource for discovering the mechanism of immune response induced by COVID-19. As an entry receptor, angiotensin-converting enzyme 2 (ACE2) can be used as a potential drug target to treat COVID-19. Molecular dynamics simulation, molecular docking and artificial intelligence (AI) technology of bioinformatics methods based on drug databases for SARS-CoV-2 can accelerate the development of drugs. Meanwhile, computational approaches are helpful to identify suitable vaccines to prevent COVID-19 infection through reverse vaccinology, Immunoinformatics and structural vaccinology.

Recent advances and challenges of biosensing in point-of-care molecular diagnosis

Molecular diagnosis, which plays a major role in infectious disease screening with successful understanding of the human genome, has attracted more attention because of the outbreak of COVID-19 recently. Since point-of-care testing (POCT) can expand the application of molecular diagnosis with the benefit of rapid reply, low cost, and working in decentralized environments, many researchers and commercial institutions have dedicated tremendous effort and enthusiasm to POCT-based biosensing for molecular diagnosis. In this review, we firstly summarize the state-of-the-art techniques and the construction of biosensing systems for POC molecular diagnosis. Then, the application scenarios of POCT-based biosensing for molecular diagnosis were also reviewed. Finally, several challenges and perspectives of POC biosensing for molecular diagnosis are discussed. This review is expected to help researchers deepen comprehension and make progresses in POCT-based biosensing field for molecular diagnosis applications.

Point-of-Care Testing-The Key in the Battle against SARS-CoV-2 Pandemic

The deleterious effects of the coronavirus disease 2019 (COVID-19) pandemic urged the development of diagnostic tools to manage the spread of disease. Currently, the "gold standard" involves the use of quantitative real-time polymerase chain reaction (qRT-PCR) for SARS-CoV-2 detection. Even though it is sensitive, specific and applicable for large batches of samples, qRT-PCR is labour-intensive, time-consuming, requires trained personnel and is not available in remote settings. This review summarizes and compares the available strategies for COVID-19: serological testing, Point-of-Care Testing, nanotechnology-based approaches and biosensors. Last but not least, we address the advantages and limitations of these methods as well as perspectives in COVID-19 diagnostics. The effort is constantly focused on understanding the quickly changing landscape of available diagnostic testing of COVID-19 at the clinical levels and introducing reliable and rapid screening point of care testing. The last approach is key to aid the clinical decision-making process for infection control, enhancing an appropriate treatment strategy and prompt isolation of asymptomatic/mild cases. As a viable alternative, Point-of-Care Testing (POCT) is typically low-cost and user-friendly, hence harbouring tremendous potential for rapid COVID-19 diagnosis.