Development and Characterization of Nano-Ink from Silicon Carbide/Multi-Walled Carbon Nanotubes/Synthesized Silver Nanoparticles for Non-Enzymatic Paraoxon Residuals Detection

The ongoing advancement in the synthesis of new nanomaterials has accelerated the rapid development of non-enzymatic pesticide sensors based on electrochemical platforms. This study aims to develop and characterize Nano-ink for applying organophosphorus pesticides using paraoxon residue detection. Multi-walled carbon nanotubes, silicon carbide, and silver nanoparticles were used to create Nano-ink using a green synthesis process in 1:1:0, 1:1:0.5, and 1:1:1 ratios, respectively. These composites were combined with chitosan of varying molecular weights, which served as a stabilizing glue to keep the Nano-ink employed in a functioning electrode stable. By using X-ray powder diffraction, Raman spectroscopy, energy dispersive X-ray spectroscopy, and a field emission scanning electron microscope, researchers were able to examine the crystallinity, element composition, and surface morphology of Nano-ink. The performance of the proposed imprinted working electrode Nano-ink was investigated using cyclic voltammetry and differential pulse voltammetry techniques. The Cyclic voltammogram of Ag NPs/chitosan (medium, 50 mg) illustrated high current responses and favorable conditions of the Nano-ink modified electrode. Under the optimized conditions, the reduction currents of paraoxon using the DPV techniques demonstrated a linear reaction ranging between 0.001 and 1.0 µg/mL (R2 = 0.9959) with a limit of detection of 0.0038 µg/mL and a limit of quantitation of 0.011 µg/mL. It was concluded that the fabricated Nano-ink showed good electrochemical activity for non-enzymatic paraoxon sensing.

A voltammetric sensor for bisphenol A using gold nanochains and carbon nanotubes

Gold nanochains (AuNCs) were prepared, and this novel material was combined with carboxylated multi-walled carbon nanotubes (cMWCNTs) to be a nanocomposite for the first time. The transmission electron microscopy (TEM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and UV-Vis spectra were used to characterize the successful preparation of AuNCs and AuNC-cMWCNT composite. Based on this hybrid material, a voltammetric sensor of bisphenol A (BPA) was established. The proposed sensor displayed excellent performance for the measurement of BPA by obvious decreased anodic peak potential and enlarged peak current. Using the optimized conditions, BPA was detected using linear sweep voltammetry, and the linear range showed as wide as 0.5 μM to 2000 μM with the detection limit estimated to be 12 nM (S/N = 3). The as-proposed sensor also exhibited satisfactory performance in determining BPA of actual plastic samples.

A high performance Pb(II) electrochemical sensor based on spherical CuS nanoparticle anchored g-C3N4

A new electrochemical sensor has been constructed for ultra-sensitive detection of lead ions (Pb²⁺) by square wave anodic stripping voltammetry (SWASV), based on the copper sulfide/graphitic carbon nitride nanocomposite modified glassy carbon electrode (CuS/g-C₃N₄/GCE). First, spherical CuS nanoparticles with good electrical conductivity were anchored on layered g-C₃N₄ with high coordination activity, affording an excellent electrode modifier CuS/g-C₃N₄ nanocomposite. Then, the performance of the CuS/g-C₃N₄/GCE and its electrochemical response to Pb²⁺ were thoroughly studied, and the sensing mechanism was investigated. On the one hand, the CuS/g-C₃N₄ nanocomposite has greatly improved the electron transportation and electrode performance through functional complementarity - CuS endows g-C₃N₄ with a good electrical conductivity and a large active specific surface area, while g-C₃N₄ endows CuS with high dispersibility and strong adsorption. On the other hand, the CuS/g-C₃N₄ modifier has effectively promoted the deposition of trace Pb²⁺ from the solution onto the electrode surface by means of synergistic enrichment (crucial for amplification of detection signals) - g-C₃N₄ can coordinate with Pb²⁺ by its large number of conjugated triazine heterocyclic rings in its molecular framework, while CuS can adsorb Pb²⁺ due to its inherent size effect of nanomaterials. The proposed sensor can efficiently detect Pb²⁺ in the concentration range of 0.050-5.000 μM with a limit of detection (LOD) as low as 4.00 nM, and can be well applied for the detection of trace Pb²⁺ in actual tea samples.

Development of highly sensitive and selective bisphenol A sensor based on a cobalt phthalocyanine-modified carbon paste electrode: application in dairy analysis

The development of an accurate, sensitive and selective sensor for the detection of bisphenol A (BPA) based on the incorporation of a new phthalocyanine derivative, cobalt phthalocyanine, C,C,C,C-tetracarboxylic acid-polyacrylamide (CoPc-PAA) into a carbon-paste matrix is presented using voltammetry and constant potential techniques. The influence of measuring parameters such as pH and scan rate on the analytical performance of the sensor was evaluated. Several kinetic parameters such as electron transfer number (n), charge transfer coefficient (α), electrode surface area (A) and diffusion coefficient (D) were also calculated. Under optimum conditions, particularly at pH 7.2, the BPA sensor resulted in a wide linear range from 25 × 10^-11 M to 2.5 × 10^-7 M and a limit of detection as low as 63.5 pM. Based on these findings, it can be concluded that our sensor can be substantially utilized for detecting BPA in spiked milk samples.

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1-80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5-230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.