Purification and characterization of adhesive exopolysaccharides from Pseudomonas putida and Pseudomonas fluorescens

Wheat straw-based microbial electrochemical reactor for azo dye decolorization and simultaneous bioenergy generation

Microbial fuel cells have emerged as a technique that can effectively treat wastewater with simultaneous electricity generation. The present study explored the performance of microbial fuel cell for decolorizing and degradation of azo dyes including, remazol brilliant blue (RBB), mordant blue 9 (MB9), acid red1 (AR1), and orange G (OG), while, simultaneously generating electricity. Wheat straw and its hydrolysate was used as a potential substrate in MFC. The hydrolysate was prepared through the degradation of wheat straw by P. floridensis, P. brevispora and P. chrysosporium, while the yeast Pichia fermentans was used as biocatalyst. Dye decolorization was carried out in a fungus-yeast mediated single-chambered MFC batch mode, U-shaped reactor, and bottle reactor in continuous mode. The maximum power density recorded in U shaped continuous reactor was 34.99 mW m^-2 on 21st day of the experiment. The best response of dye decolorization was observed in the case of MB9 (96%) with P. floridensis in the continuous electrochemical reactor followed by RBB (90-95%), OG (76%), and AR1 (38%). The toxicity of the treated wastewater was assessed using phytotoxicity analysis.

Effects of rehydration on physiological and transcriptional responses of a water-stressed rhizobium

As a microsymbiont of soybean, Bradyrhizobium japonicum plays an important role in symbiotic nitrogen fixation and sustainable agriculture. However, the survival of B. japonicum cells under water-deplete (e.g., drought) and water-replete (e.g., flood) conditions is a major concern affecting their nitrogen-fixing ability by establishing the symbiotic relationship with the host. In this study, we isolated a water stress tolerant rhizobium from soybean root nodules and tested its survival under water-deplete conditions. The rhizobium was identified as Bradyrhizobium japonicum and named strain 5038. Interestingly, both plate counting and live/dead fluorescence staining assays indicate that a number of viable but non-culturable cells exist in the culture medium upon the rehydration process which could cause dilution stress. Bradyrhizobium japonicum 5038 cells increased production of exopolysaccharide (EPS) and trehalose when dehydrated, suggesting that protective responses were stimulated. As expected, cells reduced their production upon the subsequent rehydration. To examine differential gene expression of B. japonicum 5038 when exposed to water-deplete and subsequent water-replete conditions, whole-genome transcriptional analysis was performed under 10% relative humidity (RH), and subsequent 100% RH, respectively. A total of 462 differentially expressed genes (DEGs, > 2.0-fold) were identified under the 10% RH condition, while 3,776 genes showed differential expression during the subsequent rehydration (100% RH) process. Genes involved in signal transduction, inorganic ion transport, energy production and metabolisms of carbohydrates, amino acids, and lipids were far more up-regulated than down-regulated in the 10% RH condition. Notably, trehalose biosynthetic genes (otsAB, treS, and treYZ), genes ligD, oprB, and a sigma factor rpoH were significantly induced by 10% RH. Under the subsequent 100% RH condition, genes involved in transcription, translation, cell membrane regulation, replication and repair, and protein processing were highly up-regulated. Interestingly, most of 10%-RH inducible genes displayed rehydration-repressed, except three genes encoding heat shock (Hsp20) proteins. Therefore, this study provides molecular evidence for the switch of gene expression of B. japonicum cells when encountered the opposite water availability from water-deplete to water-replete conditions.

Bacterial Extracellular Polymers: A Review

Prokaryotic microbial cells especially bacteria are highly emphases for their exopolysaccharides (EPS) production. EPS are the higher molecular weight natural extracellular compounds observe at the surface of the bacterial cells. Nowadays bacterial EPS represent rapidly emerging as new and industrially important biomaterials because it having tremendous physical and chemical properties with novel functionality. Due to its industrial demand as well as research studies the different extraction processes have been discovered to remove the EPS from the microbial biofilm. The novelties of EPS are also based on the microbial habitat conditions such as higher temperature, lower temperature, acidic, alkaliphilic, saline, etc. Based on its chemical structure they can be homopolysaccharide or heteropolysaccharide. EPSs have a wide range of applications in various industries such as food, textile, pharmaceutical, heavy metal recovery, agriculture, etc. So, this review focus on the understanding of the structure, different extraction processes, biosynthesis and genetic engineering of EPS as well as their desirable biotechnological applications.

Environmental applications of microbial extracellular polymeric substance (EPS): A review

During the last decade, water demand and wastewater generation has increased due to urbanization around the globe which had led to an increase in the utilization of chemicals/synthetic polymers for treating the wastewaters. These synthetic polymers used during the coagulation/flocculation process are non-renewable, non-biodegradable, and have a potential neurotoxic and carcinogenic effect. From the literature it is clear that extracellular polymer substance (EPS) is a potential bioflocculant, moreover it is renewable, biodegradable, eco-friendly, non-toxic as well as economically valued product. The various identification techniques and extraction methods of EPS are elaborated. Further application of EPS as absorbent in removing the dye from the industrial effluent is presented. Moreover EPS as a potential adsorbent for heavy metal removal from the various effluent is discussed. In addition, EPS is also utilized for soil remediation and soil erosion control. Mainly, EPS as bioflocculant in treating raw water, wastewater treatment, leachate and sludge management are summarized in this review.

Rheological Behavior of High Cell Density Pseudomonas putida LS46 Cultures during Production of Medium Chain Length Polyhydroxyalkanoate (PHA) Polymers

The rheology of high-cell density (HCD) cultures is an important parameter for its impact on mixing and sparging, process scale-up, and downstream unit operations in bioprocess development. In this work, time-dependent rheological properties of HCD Pseudomonas putida LS46 cultures were monitored for microbial polyhydroxyalkanoate (PHA) production. As the cell density of the fed-batch cultivation increased (0 to 25 g·L-1 cell dry mass, CDM), the apparent viscosity increased nearly nine-fold throughout the fed-batch process. The medium behaved as a nearly Newtonian fluid at lower cell densities, and became increasingly shear-thinning as the cell density increased. However, shear-thickening behavior was observed at shearing rates of approximately 75 rad·s-1 or higher, and its onset increased with viscosity of the sample. The supernatant, which contained up to 9 g·L-1 soluble organic material, contributed more to the observed viscosity effect than did the presence of cells. Owing to this behavior, the oxygen transfer performance of the bioreactor, for otherwise constant operating conditions, was reduced by 50% over the cultivation time. This study has shown that the dynamic rheology of HCD cultures is an important engineering parameter that may impact the final outcome in PHA cultivations. Understanding and anticipating this behavior and its biochemical origins could be important for improving overall productivity, yield, process scalability, and the efficacy of downstream processing unit operations.

New insights into auxin metabolism in Bradyrhizobium japonicum

Bacterial metabolism of phytohormones includes several processes such as biosynthesis, catabolism, conjugation, hydrolysis and homeostatic regulation. However, only biosynthesis and occasionally catabolism are studied in depth in microorganisms. In this work, we evaluated and reconsidered IAA metabolism in Bradyrhizobiumjaponicum E109, one of the most widely used strains for soybean inoculation around the world. The genomic analysis of the strain showed the presence of several genes responsible for IAA biosynthesis, mainly via indole-3-acetonitrile (IAN), indole-3-acetamide (IAM) and tryptamine (TAM) pathways. However; in vitro experiments showed that IAA is not accumulated in the culture medium in significant amounts. On the contrary, a strong degradation activity was observed after exogenous addition of 0.1 mM of IAA, IBA or NAA to the medium. B. japonicum E109 was not able to grow in culture medium containing IAA as a sole carbon source. In YEM medium, the bacteria degraded IAA and hydrolyzed amino acid auxin conjugates with alanine (IAAla), phenylalanine (IAPhe), and leucine (IAPhe), releasing IAA which was quickly degraded. Finally, the presence of exogenous IAA induced physiological changes in the bacteria such as increased biomass and exopolysaccharide production, as well as infection effectiveness and symbiotic behavior in soybean plants.

Characterization of high yield exopolysaccharide produced by Phyllobacterium sp. 921F exhibiting moisture preserving properties

A new strain bacteria was isolated and named as Phyllobacterium sp. 921F, due to its high production capacity of exopolysaccharide (EPS). Characterization of physico-chemical properties of the EPS and optimization for high production were conducted to aim at industrial applications. The optimum pH and temperature were 7.0 and 30°C, respectively. The following scale-up fermentation was carried out in 30L bioreactor and amounts of EPS (21.9g/L) were produced. The EPS with a molecular mass of 1082kDa was composed of glucose, galactose, and pyruvate. The EPS solution behaved as Newtonian at low concentrations (≤0.3%) and as shear thinning at higher concentration (e.g, 1%). The moisture retention ability of the EPS was found to be superior to hyaluronic acid. Results suggest that Phyllobacterium sp. 921F is a good candidate for large-scale production of the EPS which might be utilized in food and cosmetics industries.

Effect of polysaccharide from Bacillus subtilis sp. on cardiovascular diseases and atherogenic indices in diabetic rats

BACKGROUND

Diabetes mellitus induces chronic complications such as cardiovascular damage, cataracts and retinopathy, nephropathy, and polyneuropathy. The main aim of the study was to isolate and identify both of bacterial strain and exopolysaccharide to assess the possible efficiency of exopolysaccharide (BSEPS) from Bacillus subtilus sp .suppress on cardiovascular diseases, atherogenic and coronary risk indices in diabetic rats.

METHODS

The bacterial strain used was isolated from mangrove tree sediment by serial dilution and the spread-plate technique and identified by morphological, physiological, and biochemical characteristics, and by 16S rRNA analysis. The BSEPS was extracted from the bacterial supernatant by four volumes child ethanol then the functional groups, MW and chemical analysis were detected by Fourier-transform infrared (FTIR), gel permeation chromatograph (GPC) and High-performance liquid chromatography (HPLC). Also an antioxidant activity was measured by using 2,2-diphenyl-1-picrylhydrazyl (DPPH). Thirty-two male Sprague-Dawley rats were equally randomized into four groups: control group supplemented with normal saline (Group I); the second group supplemented with BSEPS (Group II); diabetic group supplemented with normal saline (Group III) and the diabetic group supplemented with BSEPS (Group IV). Diabetes was induced by Streptozotocin (STZ) (65 mg/kg BW) intraperitoneally. BSEPS (100 mg/kg BW) was administered orally for four weeks, following STZ induction.

RESULTS

The isolated strain was identified based on 16S rRNA sequence as Bacillus subtilis sp. suppress. A preliminary chemical analysis of BSEPS indicated that the monosaccharides were mannuronic acid, glucuronic acid, glucose, galactose, and mannose in a molar ratio of 1.6:1.5:1.0:2.3:1.4, respectively, with a molecular weight of 1.66 × 10(4) g mol(-1) and a molecular number of 7.64 × 10(3) g mol(-1). BSEPS inhibited 2,2-diphenyl-1-picrylhydrazyl radical activity, and BSEPS supplement reduced glucose (p < 0.05) and troponin levels while insulin levels increased (p < 0.05). BSEPS also reduced total serum cholesterol, low-density lipoprotein (LDL), very low-density lipoprotein (VLDL), and triglycerides, and elevated high-density lipoprotein-cholesterol (HDL). In parallel, intercellular adhesion molecule (ICAM), and vascular cell adhesion molecule (VCAM) levels in STZ-induced diabetic rats were reduced. Moreover, polysaccharides reduced atherogenic and coronary risk indices, which were confirmed by histopathological examination of the heart and aorta.

CONCLUSIONS

Our study suggests that BSEPS improves hyperglycemia, dyslipidemia, and cardiovascular disease risk in STZ-induced diabetic rats.

Efficacy of polysaccharide from Alcaligenes xylosoxidans MSA3 administration as protection against γ-radiation in female rats

Damage to normal tissues is a consequence of both therapeutic and accidental exposures to ionizing radiation. A water-soluble heteropolysaccharide called AXEPS, composed of glucose, galactose, rhamnose and glucouronic acid in a molar ratio of nearly 1.0:1.6:0.4:2.3, respectively, was isolated from culture medium of strain Alcaligenes xylosoxidans MSA3 by ethanol precipitation followed by freeze-drying. Chemical analysis, Fourier-transform infrared (FTIR) and chromatographic studies revealed that the molecular weight was 1.6 × 10(4) g mol(-1). This study was designed to investigate the radioprotective and biological effects of AXEPS in alleviating the toxicity of ionizing radiation in female albino rats. A total of 32 female albino rats were divided into four groups. In the control group, rats were administered vehicle by tube for four weeks. The second group was administered AXEPS (100 mg/kg) orally by gavage for four weeks. Animals in the third group were exposed to whole-body γ-rays (5 Gy) and remained for 2 weeks without treatment. The fourth group received AXEPS (100 mg/kg) orally by gavage for two weeks before being exposed to whole-body γ-rays (5 Gy), then 24 h post γ-rays, they received AXEPS (100 mg/kg) in a treatment continuing till the end of the experiment (15 days after the whole-body γ-irradiation). Oral administration of AXEPS (100 mg/kg) significantly reversed the oxidative stress effects of radiation, as evidenced by the decrease in DNA damage in the bone marrow. Assessment of apoptosis and cell proliferation markers revealed that caspase-3 significantly increased in the irradiated group. Moreover, a significant decrease in the hematological constituents of peripheral blood, the chemotactic index and CD8+ T cells were observed in animals in the irradiation-only group, whereas an increase in the lymphocyte index was observed in animals in that group. In contrast, AXEPS treatment prevented these alterations. From our results, we conclude that AXEPS is a potent antioxidant and treatment agent for protection from γ-rays.

Iron-regulated expression of alginate production, mucoid phenotype, and biofilm formation by Pseudomonas aeruginosa

Pseudomonas aeruginosa strains of non-cystic fibrosis (non-CF) origin do not produce significant amounts of extracellular alginate and are nonmucoid. In CF, such isolates can become mucoid through mutation of one of the genes (mucA, mucB, mucC, or mucD) that produce regulatory factors that sequester AlgU, required for increased expression of alginate genes. Mutation of the muc genes in the nonmucoid PAO1, PA14, PAKS-1, and Ps388 strains led to increased levels of extracellular alginate and an obvious mucoid phenotype, but only under iron-limiting growth conditions (≤5 µM), not under iron-replete conditions (≥10 µM). In contrast, >50% of P. aeruginosa isolates from chronic CF pulmonary infections expressed increased levels of alginate and mucoidy both under iron-limiting and iron-replete conditions (i.e., iron-constitutive phenotype). No single iron regulatory factor (e.g., Fur, PvdS) was associated with this loss of iron-regulated alginate expression and mucoidy in these CF isolates. However, the loss of only pyoverdine production, or its uptake, abrogated the ability of P. aeruginosa to produce a robust biofilm that represents the Psl-type of biofilm. In contrast, we show that mutation of the pyoverdine and pyochelin biosynthesis genes and the pyoverdine receptor (FpvA) lead to iron-constitutive expression of the key alginate biosynthesis gene, algD, and an explicitly mucoid phenotype in both iron-limiting and iron-replete conditions. These data indicate that alginate production and mucoidy, in contrast to other types of biofilms produced by P. aeruginosa, are substantially enhanced under iron limitation. These results also have compelling implications in relation to the use of iron chelators in the treatment of P. aeruginosa CF infections.

IMPORTANCE

Pseudomonas aeruginosa is a leading model for the investigation of biofilms. While data have been generated about the role of iron in alginate-independent (Psl/Pel) biofilm development, there is a paucity of data regarding the role of iron in alginate production and its associated mucoid phenotype. We demonstrate that biologically relevant levels of iron that exist in the airway mucus of cystic fibrosis (CF) patients have a substantial influence on production of alginate and the overt mucoid phenotype, pathognomonic of P. aeruginosa infections in CF. Mucoid mutants of non-CF P. aeruginosa isolates are mucoid only under iron limitation and do not express increased levels of alginate under iron-replete growth conditions. However, a significant number of long-term CF isolates lost their iron-regulated expression of increased alginate production and mucoidy and became iron constitutive for these properties. In contrast to the formation of Psl-type biofilms, increasing iron limitation ultimately leads to an iron-constitutive expression of alginate and mucoidy.

Alteration of the exopolysaccharide production and the transcriptional profile of free-living Frankia strain CcI3 under nitrogen-fixing conditions

We investigated the effect of different nitrogen (N) sources on exopolysaccharide (EPS) production and composition by Frankia strain CcI3, a N2-fixing actinomycete that forms root nodules with Casuarina species. Frankia cells grown in the absence of NH4Cl (i.e., under N2-fixing conditions) produced 1.7-fold more EPS, with lower galactose (45.1 vs. 54.7 mol%) and higher mannose (17.3 vs. 9.7 mol%) contents than those grown in the presence of NH4Cl as a combined N-source. In the absence of the combined N-source, terminally linked and branched residue contents were nearly twice as high with 32.8 vs. 15.1 mol% and 15.1 vs. 8.7 mol%, respectively, than in its presence, while the content of linearly linked residues was lower with 52.1 mol% compared to 76.2 mol%. To find out clues for the altered EPS production at the transcriptional level, we performed whole-gene expression profiling using quantitative reverse transcription PCR and microarray technology. The transcription profiles of Frankia strain CcI3 grown in the absence of NH4Cl revealed up to 2 orders of magnitude higher transcription of nitrogen fixation-related genes compared to those of CcI3 cells grown in the presence of NH4Cl. Unexpectedly, microarray data did not provide evidence for transcriptional regulation as a mechanism for differences in EPS production. These findings indicate effects of nitrogen fixation on the production and composition of EPS in Frankia strain CcI3 and suggest posttranscriptional regulation of enhanced EPS production in the absence of the combined N-source.

Effects of indole-3-acetic acid on the transcriptional activities and stress tolerance of Bradyrhizobium japonicum

A genome-wide transcriptional profile of Bradyrhizobium japonicum, the nitrogen-fixing endosymbiont of the soybean plant, revealed differential expression of approximately 15% of the genome after a 1 mM treatment with the phytohormone indole-3-acetic acid (IAA). A total of 1,323 genes were differentially expressed (619 up-regulated and 704 down-regulated) at a two-fold cut off with q value ≤ 0.05. General stress response genes were induced, such as those involved in response to heat, cold, oxidative, osmotic, and desiccation stresses and in exopolysaccharide (EPS) biosynthesis. This suggests that IAA is effective in activating a generalized stress response in B. japonicum. The transcriptional data were corroborated by the finding that stress tolerance of B. japonicum in cell viability assays was enhanced when pre-treated with 1 mM IAA compared to controls. The IAA treatment also stimulated biofilm formation and EPS production by B. japonicum, especially acidic sugar components in the total EPS. The IAA pre-treatment did not influence the nodulation ability of B. japonicum. The data provide a comprehensive overview of the potential transcriptional responses of the symbiotic bacterium when exposed to the ubiquitous hormone of its plant host.

Production of extracellular glycogen by Pseudomonas fluorescens: spectroscopic evidence and conformational analysis by biomolecular recognition

Glycogen is mainly found as the principal storage form of glucose in cells. Many bacteria are able to synthesize large amounts of glycogen under unfavorable life conditions. By combining infrared spectroscopy, single molecule force spectroscopy (SMFS) and immuno-staining technique, we evidenced that planktonic P. fluorescens (Pf) cells are also able to produce glycogen as an extracellular polymeric substance. For this purpose, Pf suspensions were examined at 3 and 21 h of growth in nutritive medium (LB, 0.5 g/L). The conformation of the extracellular glycogen, revealed through its infrared spectral signature, has been investigated by SMFS measurements using Freely Jointed Chain model. The analysis of force versus distance curves showed over growth time that the increase of glycogen production was accompanied by an increase in glycogen contour lengths and ramifications. These results demonstrated that the production of extracellular bacterial glycogen can occur even if the cells are not subjected to unfavorable life conditions.

Chemical sanitizers to control biofilms formed by two Pseudomonas species on stainless steel surface

The biofilm formation of Pseudomonas aeruginosa and Pseudomonas fluorescens on AISI 304 stainless steel in the presence of reconstituted skim milk under different temperatures was conducted, and the potential of three chemical sanitizers in removing the mono-species biofilms formed was compared. Pseudomonas aeruginosa cultivated in skim milk at 28 °C presented better growth rate (10.4 log CFU.mL-1) when compared with 3.7 and 4.2 log CFU.mL-1 for P. aeruginosa and P. fluorescens cultivated at 7 °C, respectively. Pseudomonas aeruginosa formed biofilm when cultivated at 28 °C. However, only the adhesion of P. aeruginosa and P. fluorescens was observed when incubated at 7 °C. The sodium dichloroisocyanurate was the most efficient sanitizer in the reduction of the adhered P. aeruginosa cells at 7 and 28 °C and those on the biofilm, respectively. The hydrogen peroxide was more effective in the reduction of adhered cells of P. fluorescens at 7 °C.

Application of a bacteriophage lysin to disrupt biofilms formed by the animal pathogen Streptococcus suis

Bacterial biofilms are crucial to the pathogenesis of many important infections and are difficult to eradicate. Streptococcus suis is an important pathogen of pigs, and here the biofilm-forming ability of 32 strains of this species was determined. Significant biofilms were completely formed by 10 of the strains after 60 h of incubation, with exopolysaccharide production in the biofilm significantly higher than that in the corresponding planktonic cultures. S. suis strain SS2-4 formed a dense biofilm, as revealed by scanning electron microscopy, and in this state exhibited increased resistance to a number of antibiotics (ampicillin, amoxicillin, ciprofloxacin, kanamycin, and rifampin) compared to that of planktonic cultures. A bacteriophage lysin, designated LySMP, was used to attack biofilms alone and in combination with antibiotics and bacteriophage. The results demonstrated that the biofilms formed by S. suis, especially strains SS2-4 and SS2-H, could be dispersed by LySMP and with >80% removal compared to a biofilm reduction by treatment with either antibiotics or bacteriophage alone of less than 20%; in addition to disruption of the biofilm structure, the S. suis cells themselves were inactivated by LySMP. The efficacy of LySMP was not dose dependent, and in combination with antibiotics, it acted synergistically to maximize dispersal of the S. suis biofilm and inactivate the released cells. These data suggest that bacteriophage lysin could form part of an effective strategy to treat S. suis infections and represents a new class of antibiofilm agents.

Whole-genome expression profiling of Bradyrhizobium japonicum in response to hydrogen peroxide

Bradyrhizobium japonicum, a nitrogen-fixing bacterium in soil, establishes a symbiotic relationship with the leguminous soybean plant. Despite a mutualistic association between the two partners, the host plant produces an oxidative burst to protect itself from the invasion of rhizobial cells. We investigated the effects of H(2)O(2)-mediated oxidative stress on B. japonicum gene expression in both prolonged exposure (PE) and fulminant shock (FS) conditions. In total, 439 and 650 genes were differentially expressed for the PE and FS conditions, respectively, at a twofold cut-off with q < 0.05. A number of genes within the transport and binding proteins category were upregulated during PE and a majority of those genes are involved in ABC transporter systems. Many genes encoding ? factors, global stress response proteins, the FixK(2) transcription factor, and its regulatory targets were found to be upregulated in the FS condition. Surprisingly, catalase and peroxidase genes which are typically expressed in other bacteria under oxidative stress were not differentially expressed in either condition. The isocitrate lyase gene (aceA) was induced by fulminant H(2)O(2) shock, as was evident at both the transcriptional and translational levels. Interestingly, there was no significant effect of H(2)O(2) on exopolysaccharide production at the given experimental conditions.

Genome-wide transcriptional and physiological responses of Bradyrhizobium japonicum to paraquat-mediated oxidative stress

The rhizobial bacterium Bradyrhizobium japonicum functions as a nitrogen-fixing symbiont of the soybean plant (Glycine max). Plants are capable of producing an oxidative burst, a rapid proliferation of reactive oxygen species (ROS), as a defense mechanism against pathogenic and symbiotic bacteria. Therefore, B. japonicum must be able to resist such a defense mechanism to initiate nodulation. In this study, paraquat, a known superoxide radical-inducing agent, was used to investigate this response. Genome-wide transcriptional profiles were created for both prolonged exposure (PE) and fulminant shock (FS) conditions. These profiles revealed that 190 and 86 genes were up- and downregulated for the former condition, and that 299 and 105 genes were up- and downregulated for the latter condition, respectively (>2.0-fold; P < 0.05). Many genes within putative operons for F(0)F(1)-ATP synthase, chemotaxis, transport, and ribosomal proteins were upregulated during PE. The transcriptional profile for the FS condition strangely resembled that of a bacteroid condition, including the FixK(2) transcription factor and most of its response elements. However, genes encoding canonical ROS scavenging enzymes, such as superoxide dismutase and catalase, were not detected, suggesting constitutive expression of those genes by endogenous ROS. Various physiological tests, including exopolysaccharide (EPS), cellular protein, and motility characterization, were performed to corroborate the gene expression data. The results suggest that B. japonicum responds to tolerable oxidative stress during PE through enhanced motility, increased translational activity, and EPS production, in addition to the expression of genes involved in global stress responses, such as chaperones and sigma factors.

Characterization of exopolysaccharides produced by plant-associated fluorescent pseudomonads

A total of 214 strains of plant-associated fluorescent pseudomonads were screened for the ability to produce the acidic exopolysaccharide (EPS) alginate on various solid media. The fluorescent pseudomonads studied were saprophytic, saprophytic with known biocontrol potential, or plant pathogenic. Approximately 10% of these strains exhibited mucoid growth under the conditions used. The EPSs produced by 20 strains were isolated, purified, and characterized. Of the 20 strains examined, 6 produced acetylated alginate as an acidic EPS. These strains included a Pseudomonas aeruginosa strain reported to cause a dry rot of onion, a strain of P. viridiflava with soft-rotting ability, and four strains of P. fluorescens. However, 12 strains of P. fluorescens produced a novel acidic EPS (marginalan) composed of glucose and galactose (1:1 molar ratio) substituted with pyruvate and succinate. Three of these strains were soft-rotting agents. Two additional soft-rotting strains of P. fluorescens produced a third acidic novel EPS composed of rhamnose, mannose, and glucose (1:1:1 molar ratio) substituted with pyruvate and acetate. When sucrose was present as the primary carbon source, certain strains produced the neutral polymer levan (a fructan) rather than an acidic EPS. Levan was produced by most strains capable of synthesizing alginate or the novel acidic EPS containing rhamnose, mannose, and glucose but not by strains capable of marginalan production. It is now evident that the group of bacteria belonging to the fluorescent pseudomonads is capable of elaborating a diverse array of acidic EPSs rather than solely alginate.

Analysis of changes in attenuated total reflection FTIR fingerprints of Pseudomonas fluorescens from planktonic state to nascent biofilm state

Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy is a useful method for monitoring biofilm in situ, non-destructively, in real time, and under fully hydrated conditions. In this work we focused on changes in Pseudomonas fluorescens ATR-FTIR fingerprint accompanying the very early stages of biofilm formation: initial bacterial adhesion and the very beginning of biofilm development in the presence of nutrients. To help interpreting variations in the ATR-FTIR fingerprint of sessile bacteria, ATR-FTIR spectra of planktonic bacteria in different growth phases were also examined, and the average surface coverage and spatial arrangement of bacteria on the ATR crystal were determined by epifluorescence microscopy. The proteins, nucleic acids and polysaccharides ATR-FTIR spectral data recorded during growth of sessile bacteria were shown to be linked to changes in the physiological state of the bacteria, possibly accompanied by extracellular polymeric substances production. This work clearly showed by spectroscopic method how bacteria change drastically their metabolism during the first hours of biofilm formation.

Characterization of starvation-induced dispersion in Pseudomonas putida biofilms: genetic elements and molecular mechanisms

Pseudomonas putida OUS82 biofilm dispersal was previously shown to be dependent on the gene PP0164 (here designated lapG). Sequence and structural analysis has suggested that the LapG geneproduct belongs to a family of cysteine proteinases that function in the modification of bacterial surface proteins. We provide evidence that LapG is involved in P. putida OUS82 biofilm dispersal through modification of the outer membrane-associated protein LapA. While the P. putida lapG mutant formed more biofilm than the wild-type, P. putida lapA and P. putida lapAG mutants displayed decreased surface adhesion and were deficient in subsequent biofilm formation, suggesting that LapG affects LapA, and that the LapA protein functions both as a surface adhesin and as a biofilm matrix component. Lowering of the intracellular c-di-GMP level via induction of an EAL domain protein led to dispersal of P. putida wild-type biofilm but did not disperse P. putida lapG biofilm, indicating that LapG exerts its activity on LapA in response to a decrease in the intracellular c-di-GMP level. In addition, evidence is provided that associated to LapA a cellulase-degradable exopolysaccharide is part of the P. putida biofilm matrix.

Sand aggregation by exopolysaccharide-producing Microbacterium arborescens--AGSB

In the rhizosphere, exopolymers are also known to be useful to improve the moisture-holding capacity. The ability of the isolates from coastal sand dunes to produce exopolymers was determined. Among which the isolate, showing very high production of exopolysaccharide (EPS), Microbacterium arborescens--AGSB, a facultative alkalophile was further studied for exopolymer production. The isolate a gram-positive non-spore forming, slender rod, catalase positive, oxidase negative, showed growth in 12% sodium chloride. The culture was found to produce exopolymer which showed good aggregation of sand which has an important role in the stabilization of sand dunes. The exopolymer was further analysed. The cold isopropanol precipitation of dialysed supernatants grown in polypeptone yeast extract glucose broth produced partially soluble EPSs with glucose as the sole carbon source. Chemical analysis of the EPS revealed the presence of rhamnose, fucose, arabinose, mannose, galactose and glucose. On optimization of growth parameters (sucrose as carbon source and glycine as nitrogen source), the polymer was found to be a heteropolysaccharide containing mannose as the major component. It was interesting to note that the chemical composition of the exopolymers produced from both unoptimized and optimized culture conditions of Microbacterium arborescens--AGSB is different from those of other species from the same genera. This study shows that marine coastal environments such as coastal sand dunes, are a previously unexplored habitat for EPS-producing bacteria, and that these molecules might be involved in ecological roles protecting the cells against dessication especially in nutrient-limited environments such as the coastal sand dunes more so in the extreme conditions of pH. Such polysaccharides may help the bacteria to adhere to solid substrates and survive during the nutrient limitations.

Identification of a bile-induced exopolysaccharide required for Salmonella biofilm formation on gallstone surfaces

Salmonella enterica serovar Typhi can establish a chronic, asymptomatic infection of the human gallbladder, suggesting that this bacterium utilizes novel mechanisms to mediate enhanced colonization and persistence in a bile-rich environment. Gallstones are one of the most important risk factors for developing carriage, and we have previously demonstrated that salmonellae form biofilms on human gallstones in vitro. Thus, we hypothesize that bile-induced biofilms on gallstone surfaces promote gallbladder colonization and maintenance of the carrier state. A colanic acid/cellulose S. enterica serovar Typhimurium double mutant formed a mature biofilm on gallstones in a test tube assay and in a new, gallstone-independent assay using cholesterol-coated Eppendorf tubes. These data suggest the presence of an unidentified exopolysaccharide necessary for mature biofilm development and demonstrate specific binding affinity between salmonellae and cholesterol. Our experiments indicate that the Salmonella O-antigen capsule (yihU-yshA and yihV-yihW) is a crucial determinant in gallstone and cholesterol biofilms but that expression of this exopolysaccharide is not necessary for binding to glass or plastic. Real-time PCR revealed that growth in bile resulted in upregulation of the O-antigen capsule-encoding operon in an agfD-independent manner. Thus, the O-antigen capsule genes are bile induced, and the capsule produced by the enzymes of this operon is specifically required for biofilm formation on cholesterol gallstones. These studies provide new therapeutic targets for preventing asymptomatic serovar Typhi gallbladder carriage.

Mineralogy influences structure and diversity of bacterial communities associated with geological substrata in a pristine aquifer

Our understanding of mineralogical influences on subsurface microbial community structure and diversity has been difficult to assess due to difficulties in isolating this variable from others in the subsurface environment. In this study, biofilm coupons were used to isolate specific geological substrata from the surrounding geological matrix during colonization by microorganisms suspended in the surrounding groundwater for an 8-week period. Upon retrieval, the structure and diversity of the microbial community associated with each type of substratum was evaluated using 16S rDNA-based terminal-restriction fragment length polymorphism (T-RFLP). Phylogenetic affiliations of the populations associated with each type of substratum were established based on sequence analysis of near full-length 16S rDNA obtained through construction of a clone library. Hematite, quartz, and saprolite each harbored a community dominated by members of the division Proteobacteria (>67% of community). However, the different substrata selected for different subdivisions of bacteria within the Proteobacteria. After accounting for the influence exerted by substratum type on recovery of DNA from the attached populations, both phylogenetic data and Jaccard and Bray-Curtis similarity indices derived from terminal-restriction fragment (T-RF) profiles suggested a strong mineralogical influence on the structure and composition of the solid phase-associated community. The results suggest that mineralogical heterogeneity influences microbial community structure and diversity in pristine aquifers.

Alginate production by Pseudomonas putida creates a hydrated microenvironment and contributes to biofilm architecture and stress tolerance under water-limiting conditions

Biofilms exist in a variety of habitats that are routinely or periodically not saturated with water, and residents must integrate cues on water abundance (matric stress) or osmolarity (solute stress) into lifestyle strategies. Here we examine this hypothesis by assessing the extent to which alginate production by Pseudomonas putida strain mt-2 and by other fluorescent pseudomonads occurs in response to water limitations and how the presence of alginate in turn influences biofilm development and stress tolerance. Total exopolysaccharide (EPS) and alginate production increased with increasing matric, but not solute, stress severity, and alginate was a significant component, but not the major component, of EPS. Alginate influenced biofilm architecture, resulting in biofilms that were taller, covered less surface area, and had a thicker EPS layer at the air interface than those formed by an mt-2 algD mutant under water-limiting conditions, properties that could contribute to less evaporative water loss. We examined this possibility and show that alginate reduces the extent of water loss from biofilm residents by using a biosensor to quantify the water potential of individual cells and by measuring the extent of dehydration-mediated changes in fatty acid composition following a matric or solute stress shock. Alginate deficiency decreased survival of desiccation not only by P. putida but also by Pseudomonas aeruginosa PAO1 and Pseudomonas syringae pv. syringae B728a. Our findings suggest that in response to water-limiting conditions, pseudomonads produce alginate, which influences biofilm development and EPS physiochemical properties. Collectively these responses may facilitate the maintenance of a hydrated microenvironment, protecting residents from desiccation stress and increasing survival.

Adherence of Bilophila wadsworthia to cultured human embryonic intestinal cells

Adherence of Bilophila wadsworthia to the cultured human embryonic intestinal cell line, Intestine 407 (Int 407), varied among the strains tested from strongly adherent (76-100% cells positive for one or more adherent bacteria) to non- or weakly adherent (0-25% positive cells). Although negative staining revealed that infrequent cells of an adherent strain, WAL 9077, the adherent type-strain, WAL 7959, and a non-adherent strain, WAL 8448, expressed loosely associated fimbrial structures, a role for these structures in adhesion could not be confirmed with either scanning or thin-section electron micrography. Ruthenium red staining of thin-section preparations and subsequent electron microscopy failed to reveal an extensive extracellular polysaccharide layer. SDS-PAGE analysis of crude outer membrane fractions of WAL 9077 and WAL 8448 demonstrated clear differences in their major and minor outer membrane protein components. Thus, we postulate that the adherence of B. wadsworthia to Int 407 cells is mediated by an outer membrane or cell wall component.

Isolation and characterization of exopolysaccharide produced byVibrio harveyistrain VB23

AIMS

The aim of the study was to isolate and characterize exopolysaccharide (EPS) produced by Vibrio harveyi strain VB23.

METHODS AND RESULTS

Growth and EPS production by V. harveyi strain VB23, was studied in mineral salts medium supplemented with NaCl (1.5%) and glucose (0.2%). The rate of EPS production in batch cultures was highest during the late log phase of growth when compared with stationary growth phase. The exopolymer was recovered from the culture supernatant by using a cold ethanol precipitation-dialysis procedure. Chemical analyses of EPS revealed that it is primarily composed of neutral sugars, uronic acids, proteins and sulfates. The purified EPS revealed prominent functional reactive groups, such as hydroxyl, carboxylic and amides, which correspond to a typical heteropolymeric polysaccharide and the EPS, also possessed good emulsification activity. The gas chromatographic analysis of an alditol acetate-derivatized sample of EPS revealed that it is composed primarily of galactose and glucose. Minor components found were rhamnose, fucose, ribose, arabinose, xylose and mannose.

CONCLUSIONS

The EPS produced by V. harveyi strain VB23 is a heteropolysaccharide possessing good emulsification activity. EPS was readily isolated from culture supernatants, which suggests that the EPS was a slime-like EPS.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first report of EPS characterization in luminous V. harveyi bacteria, which describes the isolation and characterization of an EPS expressed by V. harveyi. The results of the study contributes significantly towards an understanding of the chemical composition and applications of the EPS in environmental biotechnology and bioremediation.

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20-30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.

Biofilm formation by Pseudomonas fluorescens WCS365: a role for LapD

A role for the outer-membrane-associated LapA protein in early biofilm formation by Pseudomonas fluorescens WCS365 has previously been shown. This paper reports that lapD, a gene located adjacent to the lapA gene, also plays a role in biofilm formation. A mutation in lapD results in a conditional biofilm defect in a static assay - this biofilm phenotype is exacerbated when biofilm formation is assayed in a flow-cell system. Furthermore, a lapD mutation shows a partial defect in the transition from reversible to irreversible attachment, consistent with an early role for the lapD gene product in biofilm formation. LapD is shown to be localized to the inner membrane of P. fluorescens. The data show decreased LapA associated with the cell surface, but no apparent change in cytoplasmic levels of this protein or lapA transcription, in a lapD mutant. A model is proposed wherein the role of LapD in biofilm formation is modulating the secretion of the LapA adhesin.

Capsular polysaccharide surrounds smooth and rugose types of Salmonella enterica serovar Typhimurium DT104

The biofilms and rugose colony morphology of Salmonella enterica serovar Typhimurium strains are usually associated with at least two different exopolymeric substances (EPS), curli and cellulose. In this study, another EPS, a capsular polysaccharide (CP) synthesized constitutively in S. enterica serovar Typhimurium strain DT104 at 25 and 37 degrees C, has been recognized as a biofilm matrix component as well. Fluorophore-assisted carbohydrate electrophoresis (FACE) analysis indicated that the CP is comprised principally of glucose and mannose, with galactose as a minor constituent. The composition differs from that of known colanic acid-containing CP that is isolated from cells of Escherichia coli and other enteric bacteria grown at 37 degrees C. The reactivity of carbohydrate-specific lectins conjugated to fluorescein isothiocyanate or gold particles with cellular carbohydrates demonstrated the cell surface localization of CP. Further, lectin binding also correlated with the FACE analysis of CP. Immunoelectron microscopy, using specific antibodies against CP, confirmed that CP surrounds the cells. Confocal microscopy of antibody-labeled cells showed greater biofilm formation at 25 degrees C than at 37 degrees C. Since the CP was shown to be produced at both 37 degrees C and 25 degrees C, it does not appear to be significantly involved in attachment during the early formation of the biofilm matrix. Although the attachment of S. enterica serovar Typhimurium DT104 does not appear to be mediated by its CP, the capsule does contribute to the biofilm matrix and may have a role in other features of this organism, such as virulence, as has been shown previously for the capsules of other gram-negative and gram-positive bacteria.

Production and characterization of a new bioemulsifier from Pseudomonas putida ML2

AIMS

To characterize the bioemulsifier produced by a nonfluorescent strain of Pseudomonas putida isolated from a polluted sediment and to determine the influence of pH, temperature, media composition, and carbon and nitrogen source on growth and emulsifying activity.

METHODS AND RESULTS

Different indexes were employed to determine the emulsifying properties of culture supernatants of P. putida ML2 in defined and complex media. Surface tension of cell-free supernatants was measured. Purification and chemical analysis of the emulsifier was performed. Confirmed results indicate that a polysaccharide with hexasaccharide repeating units is responsible for the emulsifying activity in a mineral medium with glucose as sole carbon source. Moreover, an emulsifier is produced when growing on naphthalene.

CONCLUSIONS

Culture media composition influences the amount and the properties of the emulsifier produced by this P. putida strain. Under nitrogen limiting conditions, a polysaccharide is responsible for the emulsifying activity in defined mineral media. In complex nitrogen rich medium, a different kind of emulsifier is produced. The exopolymer may contribute to hydrocarbons solubilization.

SIGNIFICANCE AND IMPACT OF THE STUDY

This is the first exopolysaccharide with emulsifying properties produced by a Pseudomonas strain reported to the present. Also chemical composition is significantly different from previous reports. This strain has potential use in bioremediation and the purified polysaccharide may be used in food and cosmetic industry. Moreover, the production of the exopolymer may play a role on biofilm formation.

Elemental and redox analysis of single bacterial cells by x-ray microbeam analysis

High-energy x-ray fluorescence measurements were used to make elemental maps and qualitative chemical analyses of individual Pseudomonas fluorescens strain NCIMB 11764 cells. Marked differences between planktonic and adhered cells were seen in the morphology, elemental composition, and sensitivity to Cr(VI) of hydrated cells at spatial scales of 150 nm. This technology can be applied to natural geomicrobiological systems.

Use of fluorescent lectin probes for analysis of footprints from Pseudomonas aeruginosa MDC on hydrophilic and hydrophobic glass substrata

Microbial footprints of Pseudomonas aeruginosa MDC attached for 1 h to clean or silanized glass were analyzed with fluorescently labeled lectin probes. Footprint composition varied, depending on cell physiology and substratum surface chemistry. This suggests that substratum physicochemistry affected the structure of cell surfaces of adsorbed organisms.

Predominant Microflora of Downgraded Danish Bulk Tank Milk

The microflora of downgraded Danish bulk tank milk was examined to identify the main causes of increased microbial counts. Seventy-five representative samples with a microbial count exceeding 3.0 x 10(4) cfu/mL were selected for a more detailed microbial examination. A total of 1237 isolates from these samples were identified. Gram-negative, oxidase-positive bacteria were found in 72% of the samples. Coliforms were found in 20% of the samples, and non-coliforms were found in 49% of the samples. Coryneforms, other gram-positive rods, Lactococcus spp., Micrococcus spp., and coagulase-negative Staphylococcus spp. were found in 28 to 53% of the samples. Bacillus spp., Enterococcus spp., Staphylococcus aureus, Streptococcus dysgalactiae, Streptococcus uberis, and yeasts were found in <25% of the samples. Additionally, the isolates were divided into 3 groups, based on the main cause of an elevated microbial count. Microorganisms primarily associated with poor hygiene dominated the microflora in 64% of the samples; bacteria also related to poor hygiene, but in addition associated with growth at low temperatures (psychrotrophic bacteria) dominated the microflora in 28% of the samples; and bacteria mainly associated with mastitis dominated the microflora in 8% of the samples. A bulk tank milk storage period of 48 h instead of 24 h did not affect the proportion of downgraded milk samples and could not be associated with a specific group of microorganisms. Further, no relationship was found between somatic cell counts and the presence of mastitis bacteria.

Comparative analysis of Salmonella enterica serovar Typhimurium biofilm formation on gallstones and on glass

In this study, the roles of global regulators, motility, lipopolysaccharide, and exopolysaccharides were further characterized with respect to biofilm formation on both gallstones and glass surfaces. These studies show the complex nature of biofilms and demonstrate that characteristics observed for each biofilm are unique to the particular culture condition.

Properties of polysaccharide produced by Azotobacter vinelandii cultured on 4-hydroxybenzoic acid

AIMS

Characterization of the exopolysaccharide produced by Azotobacter vinelandii grown on 4-hydroxybenzoic acid (EPS I), and the comparison between this exopolysaccharide and commercial alginate, constituted the main objective of this work.

METHODS AND RESULTS

Total carbohydrates, uronic acids, acetyl and pyruvyl groups and proteins were determined by colorimetric methods and composition was confirmed by Nuclear Magnetic Resonance studies. Rheological properties were analysed under different physical and chemical conditions. Results showed differences between EPS I and commercial alginate, in relation to both composition and viscosity. Higher amount of guluronnosyl residues were found in EPS I, whereas commercial alginate contained the same proportion of mannuronosyl and guluronnosyl residues. In accordance with this result, EPS I gave rise to solutions of higher viscosity than commercial alginate, although solutions of this polysaccharide showed greater stability when conditions were altered.

CONCLUSIONS

The exopolysaccharide produced by A. vinelandii grown on 4-hydroxybenzoic acid showed a different composition in comparison with commercial alginate, which leads to higher viscosity values for the aqueous solutions of EPS I.

SIGNIFICANCE AND IMPACT OF STUDY

This work describes for the first time the characteristics of an exopolysaccharide produced by A. vinelandii from 4-hydroxybenzoic acid, a substrate rarely used as sole carbon source.

Analysis of microfouling products formed on metallic surfaces exposed in a marine environment

Mild steel (MS), stainless steel (SS) and copper (Cu) test panels were immersed in the surface water of Dona Paula Bay over a period of 15 d. During the immersion period data on the hydrography, nutrients and suspended matter were also collected. The suspended matter and fouling products on the MS, SS and Cu panels were analysed for organic carbon (OC), organic nitrogen (ON), chlorophyll a (chl a), protein and carbohydrate concentration and composition, and the dry weight (DW) was recorded. Compared to suspended matter, the chemical and biochemical components of the fouling products showed strong temporal and substratum related differences. The microfouling biomass (as DW, OC, ON, chl a and protein) on all the test panels generally increased over the period of immersion. Carbohydrates were more abundant in the suspended matter whereas fouling products were enriched in proteins. The contribution of protein-carbon to the total carbon increased over the period of immersion for the microfouling products on MS and SS whilst it did not show a consistent trend on Cu. Whereas, the carbohydrate-carbon contribution to the total carbon increased for the fouling products on MS, it did not exhibit a particular pattern on SS or Cu over the period of immersion. Capillary gas chromatographic analysis showed the presence of glucose, galactose, mannose, arabinose, xylose fucose and ribose in both the fouling products and suspended matter. However, there were differences in the relative distribution of these monosaccharides in the suspended matter and the fouling products. Glucose was the most abundant monosaccharide, which showed strong temporal variations in suspended matter. In contrast, the wt % concentrations of individual monosaccharides showed large temporal differences for the fouling products, which were strongly influenced by the period of immersion and the type of test substratum. Glucose and fucose were relatively more abundant in the fouling products on SS and Cu, whilst glucose was the most abundant monosaccharide on MS. The monosaccharide and chemical composition data suggest strong temporal changes in the composition of the fouling products.