Haploidization via Chromosome Elimination: Means and Mechanisms

Doubled haploid technology and synthetic apomixis: Recent advances and applications in future crop breeding

Doubled haploid (DH) technology and synthetic apomixis approaches can considerably shorten breeding cycles and enhance breeding efficiency. Compared with traditional breeding methods, DH technology offers the advantage of rapidly generating inbred lines, while synthetic apomixis can effectively fix hybrid vigor. In this review, we focus on (i) recent advances in identifying and characterizing genes responsible for haploid induction (HI), (ii) the molecular mechanisms of HI, (iii) spontaneous haploid genome doubling, and (iv) crop synthetic apomixis. We also discuss the challenges and potential solutions for future crop breeding programs utilizing DH technology and synthetic apomixis. Finally, we provide our perspectives about how to integrate DH and synthetic apomixis for precision breeding and de novo domestication.

RNAi-mediated downregulation of AcCENH3 can induce in vivo haploids in onion (Allium cepa L.)

Haploid induction (HI) holds great promise in expediting the breeding process in onion, a biennial cross-pollinated crop. We used the CENH3-based genome elimination technique in producing a HI line in onion. Here, we downregulated AcCENH3 using the RNAi approach without complementation in five independent lines. Out of five events, only three could produce seeds upon selfing. The progenies showed poor seed set and segregation distortion, and we were unable to recover homozygous knockdown lines. The knockdown lines showed a decrease in accumulation of AcCENH3 transcript and protein in leaf tissue. The decrease in protein content in transgenic plants was correlated with poor seed set. When the heterozygous knockdown lines were crossed with wild-type plants, progenies showed HI by genome elimination of the parental chromosomes from AcCENH3 knockdown lines. The HI efficiency observed was between 0 and 4.63% in the three events, and it was the highest (4.63%) when E1 line was crossed with wildtype. Given the importance of doubled haploids in breeding programmes, the findings from our study are poised to significantly impact onion breeding.

Centromere sequence-independent but biased loading of subgenome-specific CENH3 variants in allopolyploid Arabidopsis suecica

Centromeric nucleosomes are determined by the replacement of the canonical histone H3 with the centromere-specific histone H3 (CENH3) variant. Little is known about the centromere organization in allopolyploid species where different subgenome-specific CENH3s and subgenome-specific centromeric sequences coexist. Here, we analyzed the transcription and centromeric localization of subgenome-specific CENH3 variants in the allopolyploid species Arabidopsis suecica. Synthetic A. thaliana x A. arenosa hybrids were generated and analyzed to mimic the early evolution of A. suecica. Our expression analyses indicated that CENH3 has generally higher expression levels in A. arenosa compared to A. thaliana, and this pattern persists in the hybrids. We also demonstrated that despite a different centromere DNA composition, the centromeres of both subgenomes incorporate CENH3 encoded by both subgenomes, but with a positive bias towards the A. arenosa-type CENH3. The intermingled arrangement of both CENH3 variants demonstrates centromere plasticity and may be an evolutionary adaption to handle more than one CENH3 variant in the process of allopolyploidization.

Allelic variation and haplotype diversity of Matrilineal (MTL) gene governing in vivo maternal haploid induction in maize

Diverse haploid inducer lines with > 6% of haploid induction rate are now routinely used to develop doubled haploid lines. Though MTL gene regulates haploid induction, its molecular characterization and haplotype analysis in maize and its related species have not been undertaken so far. In the present study, the entire 1812 bp long MTL gene was sequenced among two mutant and eight wild-type inbreds. A 4 bp insertion differentiated the mutant from the wild-type allele. Sequence analysis further revealed 103 polymorphic sites including 38 InDels and 65 SNPs. A total of 15 conserved regions were detected, of which exon-4 was the most conserved. Ten gene-based markers specific to MTL revealed the presence of 40 haplotypes among diverse 48 inbreds of exotic and indigenous origin. It generated 20 alleles with an average of two alleles per locus. The mean polymorphic information content was 0.3247 with mean gene diversity of 0.4135. A total of 15 paralogous sequences of MTL were detected in maize genome with 3-7 exons. Maize MTL proteins of both wild-type and mutant were non-polar in nature, and they possessed four domains. R1-nj-based haploid inducer (HI) lines viz., Pusa-HI-101 and Pusa-HI-102 had an average haploid induction rate of 8.45 ± 0.96% and 10.46 ± 1.15%, respectively. Lines wild-type MTL gene did not generate any haploid. In comparison with 27 orthologues of 21 grass species, maize MTL gene had the closest ancestry with Saccharum spontaneum and Sorghum. The information generated here assumes great significance in understanding the diversity of MTL gene and presence of paralogues and orthologues. This is the first report on haplotype analysis and molecular characterization of MTL gene in maize and related grass species.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12298-024-01456-3.

Haploid identification in maize

Doubled haploid (DH) line production through in vivo maternal haploid induction is widely adopted in maize breeding programs. The established protocol for DH production includes four steps namely in vivo maternal haploid induction, haploid identification, genome doubling of haploid, and self-fertilization of doubled haploids. Since modern haploid inducers still produce relatively small portion of haploids among undesirable hybrid kernels, haploid identification is typically laborious, costly, and time-consuming, making this step the second foremost in the DH technique. This manuscript reviews numerous methods for haploid identification from different approaches including the innate differences in haploids and diploids, biomarkers integrated in haploid inducers, and automated seed sorting. The phenotypic differentiation, genetic basis, advantages, and limitations of each biomarker system are highlighted. Several approaches of automated seed sorting from different research groups are also discussed regarding the platform or instrument used, sorting time, accuracy, advantages, limitations, and challenges before they go through commercialization. The past haploid selection was focusing on finding the distinguishable marker systems with the key to effectiveness. The current haploid selection is adopting multiple reliable biomarker systems with the key to efficiency while seeking the possibility for automation. Fully automated high-throughput haploid sorting would be promising in near future with the key to robustness with retaining the feasible level of accuracy. The system that can meet between three major constraints (time, workforce, and budget) and the sorting scale would be the best option.

Efficient induction and rapid identification of haploid grains in tetraploid wheat by editing genes TtMTL and pyramiding anthocyanin markers

Doubled haploid (DH) technology provides an effective way to generate homozygous genetic and breeding materials over a short period of time. We produced three types of homozygous TtMTL gene-edited mutants (mtl-a, mtl-b, and mtl-ab) by CRISPR/Cas9 in durum wheat. PCR restriction enzymes and sequencing confirmed that the editing efficiency was up to 53.5%. The seed-setting rates of the three types of mutants ranged from 20% to 60%. Abnormal grain phenotypes of kernel, embryo, and both embryo and endosperm abortions were observed in the progenies of the mutants. The average frequency of embryo-less grains was 25.3%. Chromosome counting, guard cell length, and flow cytometry confirmed that the haploid induction rate was in the range of 3%-21% in the cross- and self-pollinated progenies of the mtl mutants (mtl-a and mtl-ab). Furthermore, we co-transformed two vectors, pCRISPR/Cas9-MTL and pBD68-(ZmR + ZmC1), into durum wheat, to pyramide Ttmtl-edited mutations and embryo-specifically expressed anthocyanin markers, and developed a homozygous durum haploid inducer with purple embryo (DHIPE). Using DHIPE as the male parent to be crossed with the wild-type Kronos, the grains with white embryos were identified as haploid, while the grains with purple embryos were diploid. These findings will promote the breeding of new tetraploid wheat varieties.

Haploid rhapsody: the molecular and cellular orchestra of in vivo haploid induction in plants

In planta haploid induction (HI), which reduces the chromosome number in the progeny after fertilization, has garnered increasing attention for its significant potential in crop breeding and genetic research. Despite the identification of several natural and synthetic HI systems in different plant species, the molecular and cellular mechanisms underlying these HI systems remain largely unknown. This review synthesizes the current understanding of HI systems in plants (with a focus on genes and molecular mechanisms involved), including the molecular and cellular interactions which orchestrate the HI process. As most HI systems can function across taxonomic boundaries, we particularly discuss the evidence for conserved mechanisms underlying the process. These include mechanisms involved in preserving chromosomal integrity, centromere function, gamete communication and/or fusion, and maintenance of karyogamy. While significant discoveries and advances on haploid inducer systems have arisen over the past decades, we underscore gaps in understanding and deliberate on directions for further research for a more comprehensive understanding of in vivo HI processes in plants.

Heterozygosity analysis of spontaneous 2n female gametes and centromere mapping of the diploid Hevea brasiliensis based on full-sib triploid populations

KEY MESSAGE

Unreduced megagametophytes via second-division restitution were confirmed through heterozygosity analysis, and four candidate physical centromeres of rubber were located for the first time. The evaluation of maternal heterozygosity restitution (MHR) is vital in identifying the mechanism of 2n gametogenesis and assessing the utilization value of 2n gametes. In this study, three full-sib triploid populations were employed to evaluate the MHR of 2n female gametes of rubber tree clone GT1 and to confirm their genetic derivation. The 2n female gametes of GT1 were derived from second-division restitution (SDR) and transmitted more than half of the parental heterozygosity. In addition, low recombination frequency markers were developed, and four candidate physical centromeres of rubber tree were located for the first time. The confirmation that 2n female gametes of rubber tree clone GT1 are derived from SDR provides insights into the molecular mechanisms of 2n gametogenesis. In addition, the identified centromere location will aid in the development of centromeric markers for the rapid identification of the 2n gametogenesis mechanism.

Creation and study of emmer (Triticum dicoccum) × triticale hybrids

Triticale (× Triticosecale Wittmack) is of great interest as an insurance crop that can ensure the stability of the gross harvest of feed and food grains at a lower cost. In Western Siberia, only winter triticale varieties are cultivated, however, spring triticales are important for cultivation in regions not suitable for winter crops. To create spring varieties with high yields and good grain quality, it is necessary to study and enrich the gene pool, identify donors of economically valuable traits. One of the possible ways to solve this problem can be through the production of secondary hexaploid triticales with the involvement of the tetraploid wild-growing species of emmer wheat Triticum dicoccum (Schrank) Schuebl. The aim of this work was to create and study hybrids of emmer T. dicoccum (Schrank) Schuebl. with hexaploid triticale using genomic in situ hybridization for staining of meiotic chromosomes and analysis of plant productivity elements in F4-F8. DT4, DT5, DT6 plants and the prebreeding F6 forms obtained from them - DT 4/168, DT 5/176 and DT 6/186 - were selected according to the characteristics of the productivity and the nature of the grain in the F4 hybrid population. The offspring of hybrids DT4 and DT5 and prebreeding forms DT 4/168 and DT 5/176 had an increased grain nature (over 750 g/l), but low productivity. The hybrid DT6 and the breeding form DT 6/186 obtained from it had high grain productivity (785 ± 41 and 822 ± 74 g/m2, respectively), but, like the paternal form of triticale UK 30/33, had a reduced nature of the grain. In F8 DT 6/186 plants, 7 homologous pairs of rye chromosomes and from 27 to 30 wheat chromosomes were found in meiosis, which indicates the presence of a complete rye genome and two wheat ААВВ genomes. Rye chromosomes showed stable formation of bivalents in contrast to wheat chromosomes, which caused the presence of aneuploids in plant populations. Thus, hexaploid forms DT 4/168 and DT 5/176 with well-made smooth grain and high grain size were obtained, which can be used as a source of this trait for selection of food-grade triticale. DT 6/186 is a promising form for further breeding in order to obtain high-yielding forms of triticale.

Challenges and potentials of new breeding techniques in Cannabis sativa

Cannabis sativa L. is an ancient crop used for fiber and seed production and not least for its content of cannabinoids used for medicine and as an intoxicant drug. Due to the psychedelic effect of one of the compounds, tetrahydrocannabinol (THC), many countries had regulations or bands on Cannabis growing, also as fiber or seed crop. Recently, as many of these regulations are getting less tight, the interest for the many uses of this crop is increasing. Cannabis is dioecious and highly heterogenic, making traditional breeding costly and time consuming. Further, it might be difficult to introduce new traits without changing the cannabinoid profile. Genome editing using new breeding techniques might solve these problems. The successful use of genome editing requires sequence information on suitable target genes, a genome editing tool to be introduced into plant tissue and the ability to regenerate plants from transformed cells. This review summarizes the current status of Cannabis breeding, uncovers potentials and challenges of Cannabis in an era of new breeding techniques and finally suggests future focus areas that may help to improve our overall understanding of Cannabis and realize the potentials of the plant.

Loss-of-function of gynoecium-expressed phospholipase pPLAIIγ triggers maternal haploid induction in Arabidopsis

Production of in planta haploid embryos that inherit chromosomes from only one parent can greatly increase breeding efficiency via quickly generating homozygous plants, called doubled haploid. One of the main players of in planta haploid induction is a pollen-specific phospholipase A, which is able, when mutated, to induce in vivo haploid induction in numerous monocots. However, no functional orthologous gene has been identified in dicots plants. Here, we show that loss-of-function of gynoecium-expressed phospholipase AII (pPLAIIγ) triggers maternal haploid plants in Arabidopsis, at an average rate of 1.07%. Reciprocal crosses demonstrate that haploid plants are triggered from the female side and not from the pollen, and the haploid plants carry the maternal genome. Promoter activity of pPLAIIγ shows enriched expression in the funiculus of flower development stages 13 and 18, and pPLAIIγ fused to yellow fluorescent protein reveals a plasma-membrane localization Interestingly, the polar localized PIN1 at the basal plasma membrane of the funiculus was all internalized in pplaIIγ mutants, suggesting that altered PIN1 localization in female organ could play a role in maternal haploid induction.

Genetic resources and breeding of maize for Striga resistance: a review

The potential yield of maize (Zea mays L.) and other major crops is curtailed by several biotic, abiotic, and socio-economic constraints. Parasitic weeds, Striga spp., are major constraints to cereal and legume crop production in sub-Saharan Africa (SSA). Yield losses reaching 100% are reported in maize under severe Striga infestation. Breeding for Striga resistance has been shown to be the most economical, feasible, and sustainable approach for resource-poor farmers and for being environmentally friendly. Knowledge of the genetic and genomic resources and components of Striga resistance is vital to guide genetic analysis and precision breeding of maize varieties with desirable product profiles under Striga infestation. This review aims to present the genetic and genomic resources, research progress, and opportunities in the genetic analysis of Striga resistance and yield components in maize for breeding. The paper outlines the vital genetic resources of maize for Striga resistance, including landraces, wild relatives, mutants, and synthetic varieties, followed by breeding technologies and genomic resources. Integrating conventional breeding, mutation breeding, and genomic-assisted breeding [i.e., marker-assisted selection, quantitative trait loci (QTL) analysis, next-generation sequencing, and genome editing] will enhance genetic gains in Striga resistance breeding programs. This review may guide new variety designs for Striga-resistance and desirable product profiles in maize.

A simple and highly efficient strategy to induce both paternal and maternal haploids through temperature manipulation

Haploid production by outcrossing with inducers is one of the key technologies to revolutionize breeding. A promising approach for developing haploid inducers is by manipulating centromere-specific histone H3 (CENH3/CENPA)¹. GFP-tailswap, a CENH3-based inducer, induces paternal haploids at around 30% and maternal haploids at around 5% (ref. ²). However, male sterility of GFP-tailswap makes high-demand maternal haploid induction more challenging. Our study describes a simple and highly effective method for improving both directions of haploid production. Lower temperatures dramatically enhance pollen vigour but reduce haploid induction efficiency, while higher temperatures act oppositely. Importantly, the effects of temperatures on pollen vigour and on haploid induction efficiency are independent. These features enable us to easily induce maternal haploids at around 24.8% by using pollen of inducers grown at lower temperatures to pollinate target plants, followed by switching to high temperatures for haploid induction. Moreover, paternal haploid induction can be simplified and enhanced by growing the inducer at higher temperatures pre- and post-pollination. Our findings provide new clues for developing and using CENH3-based haploid inducers in crops.

Synthetic maize centromeres transmit chromosomes across generations

Centromeres are long, often repetitive regions of genomes that bind kinetochore proteins and ensure normal chromosome segregation. Engineering centromeres that function in vivo has proven to be difficult. Here we describe a tethering approach that activates functional maize centromeres at synthetic sequence arrays. A LexA-CENH3 fusion protein was used to recruit native Centromeric Histone H3 (CENH3) to long arrays of LexO repeats on a chromosome arm. Newly recruited CENH3 was sufficient to organize functional kinetochores that caused chromosome breakage, releasing chromosome fragments that were passed through meiosis and into progeny. Several fragments formed independent neochromosomes with centromeres localized over the LexO repeat arrays. The new centromeres were self-sustaining and transmitted neochromosomes to subsequent generations in the absence of the LexA-CENH3 activator. Our results demonstrate the feasibility of using synthetic centromeres for karyotype engineering applications.

A female in vivo haploid-induction system via mutagenesis of egg cell-specific peptidases

Crop breeding schemes can be significantly accelerated by using (doubled) haploid plants. In vivo haploid induction has been applied in plant breeding for decades but is still not available for all crops and genotypes, and haploidization rates are generally very low. Therefore, methodological improvements to and new concepts for haploidization are required. Here, we report a novel system for the induction of haploid plants by mutating genes encoding egg cell-specific aspartic endopeptidases (ECSs). We show that after successful sperm-egg cell fusion, ECSs play a critical role to ensure male and female nucleus fusion after fertilization. The ecs1 ecs2 double mutant can induce haploids by both selfing and hybridization in Arabidopsis and ECS mutation is also capable of producing haploids in rice. In summary, our study develops a novel approach for maternal haploidization and provides new insights into the molecular basis of fertilization.

Accelerated Breeding for Helianthus annuus (Sunflower) through Doubled Haploidy: An Insight on Past and Future Prospects in the Era of Genome Editing

The aim of any breeding process is to fully express the targeted, superior/desirable parent characteristic in the progeny. Hybrids are often used in this dynamic, and complex process for which homozygous parents-which may require up to eight generations of back crossing and selection-are required. Doubled haploid (DH) technologies can facilitate the production of true breeding lines faster and in a more efficient manner than the traditional back crossing and selection strategies. Sunflower is the third most important oilseed crop in the world and has no available double haploid induction procedure/technique that can be efficiently used in breeding programs. A reproducible and efficient doubled haploid induction method would be a valuable tool in accelerating the breeding of new elite sunflower varieties. Although several attempts have been made, the establishment of a sunflower doubled haploid induction protocol has remained a challenge owing recalcitrance to in vitro culture regeneration. Approaches for haploid development in other crops are often cultivar specific, difficult to reproduce, and rely on available tissue culture protocols-which on their own are also cultivar and/or species specific. As an out-crossing crop, the lack of a double haploid system limits sunflower breeding and associated improvement processes, thereby delaying new hybrid and trait developments. Significant molecular advances targeting genes, such as the centromeric histone 3 (CenH3) and Matrilineal (MTL) gene with CRISPR/Cas9, and the successful use of viral vectors for the delivery of CRISPR/Cas9 components into plant cells eliminating the in vitro culture bottleneck, have the potential to improve double haploid technology in sunflower. In this review, the different strategies, their challenges, and opportunities for achieving doubled haploids in sunflower are explored.

The Roads to Haploid Embryogenesis

Although zygotic embryogenesis is usually studied in the field of seed biology, great attention has been paid to the methods used to generate haploid embryos due to their applications in crop breeding. These mainly include two methods for haploid embryogenesis: in vitro microspore embryogenesis and in vivo haploid embryogenesis. Although microspore culture systems and maize haploid induction systems were discovered in the 1960s, little is known about the molecular mechanisms underlying haploid formation. In recent years, major breakthroughs have been made in in vivo haploid induction systems, and several key factors, such as the matrilineal (MTL), baby boom (BBM), domain of unknown function 679 membrane protein (DMP), and egg cell-specific (ECS) that trigger in vivo haploid embryo production in both the crops and Arabidopsis models have been identified. The discovery of these haploid inducers indicates that haploid embryogenesis is highly related to gamete development, fertilization, and genome stability in ealry embryos. Here, based on recent efforts to identify key players in haploid embryogenesis and to understand its molecular mechanisms, we summarize the different paths to haploid embryogenesis, and we discuss the mechanisms of haploid generation and its potential applications in crop breeding. Although these haploid-inducing factors could assist egg cells in bypassing fertilization to initiate embryogenesis or trigger genome elimination in zygotes after fertilization to form haploid embryos, the fertilization of central cells to form endosperms is a prerequisite step for haploid formation. Deciphering the molecular and cellular mechanisms for haploid embryogenesis, increasing the haploid induction efficiency, and establishing haploid induction systems in other crops are critical for promoting the application of haploid technology in crop breeding, and these should be addressed in further studies.

Centromeres: From chromosome biology to biotechnology applications and synthetic genomes in plants

Centromeres are the genomic regions that organize and regulate chromosome behaviours during cell cycle, and their variations are associated with genome instability, karyotype evolution and speciation in eukaryotes. The highly repetitive and epigenetic nature of centromeres were documented during the past half century. With the aid of rapid expansion in genomic biotechnology tools, the complete sequence and structural organization of several plant and human centromeres were revealed recently. Here, we systematically summarize the current knowledge of centromere biology with regard to the DNA compositions and the histone H3 variant (CENH3)-dependent centromere establishment and identity. We discuss the roles of centromere to ensure cell division and to maintain the three-dimensional (3D) genomic architecture in different species. We further highlight the potential applications of manipulating centromeres to generate haploids or to induce polyploids offspring in plant for breeding programs, and of targeting centromeres with CRISPR/Cas for chromosome engineering and speciation. Finally, we also assess the challenges and strategies for de novo design and synthesis of centromeres in plant artificial chromosomes. The biotechnology applications of plant centromeres will be of great potential for the genetic improvement of crops and precise synthetic breeding in the future.

Cowpea speed breeding using regulated growth chamber conditions and seeds of oven-dried immature pods potentially accommodates eight generations per year

BACKGROUND

Cowpea is a dryland crop with potential to improve food security in sub-Saharan Africa, where it is mostly produced and consumed. Contemporary plant improvement technologies, including genome editing, marker-assisted selection, and optimized transformation protocols, are being deployed to improve cowpea characteristics. Integrating speed breeding with these technologies would accelerate genetic gain in cowpea breeding. There are established speed breeding protocols for other important legumes, such as soybean, peanut, and chickpea, but none has been previously reported for cowpea.

RESULTS

With the aid of regulated growth conditions in two different chamber types, as well as the cultivation of new plant generations from seeds of oven-dried immature pods, we developed and validated, for the first time, an efficient speed breeding protocol that accommodates approximately seven to eight breeding generations per year for 3 cowpea genotypes. The 3 cowpea genotypes were evaluated under controlled growth conditions in light-emitting diode and metal halide lamp chambers to determine the effect of CO₂ supplementation on flowering and maturation durations, optimum conditions for plant growth, cross pollination, and pod development. Elevated CO₂ concentration had no influence on either flowering time or pod development. Adequate temperature, relative humidity and light intensity improved plant development and the rate of successful hand pollination, and  cultivating seeds of 11-day-old immature pods oven-dried at 39 °C for 2 days resulted in at least a 62% reduction in the time between pollination and sowing of the next plant generation. The plants cultivated from seeds of the oven-dried immature pods showed no defect at any stage of development.

CONCLUSIONS

Using the speed breeding protocol developed in this study, cowpea breeding cycles can be increased from the traditional one cycle per year in the field to as many as 8 generations per year in regulated growth chamber conditions. This protocol has no special technical requirements; hence, it can be implemented in any standard growth chamber. This would fast-track development, testing, validation, and utilization of improved cowpea cultivars.

Developments and prospects for doubled haploid wheat

Doubled haploid production is a valuable biotechnology that can accelerate the breeding of new wheat varieties by several years through the one-step creation of 100% homozygous plants. The technology also plays important role in studying the genetic control of traits in wheat, in marker-assisted selection, in genomics and in genetic engineering. In this paper, recent advances in androgenesis and gynogenesis techniques, emphasizing predominantly the in vitro culture phase, as well as the emerging innovative approaches in researching and producing wheat doubled haploids are reviewed. Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-based genome editing, that allows targeted mutagenesis and gene targeting, is being tested extensively as a powerful and precise tool to induce doubled haploids in wheat. The review provides the reader with recent examples of gene modifications in wheat to induce haploidy.

A reactive oxygen species burst causes haploid induction in maize

Haploid induction (HI) is an important tool in crop breeding. Phospholipase A1 (ZmPLA1)/NOT LIKE DAD (NLD)/MATRILINEAL (MTL) is a key gene controlling HI in maize; however, the underlying molecular mechanism remains unclear. In this study, to dissect why loss of ZmPLA1 function could mediate HI we performed a comprehensive multiple omics analysis of zmpla1 mutant anthers by integrating transcriptome, metabolome, quantitative proteome, and protein modification data. Functional classes of significantly enriched or differentially abundant molecular entities were found to be associated with the oxidative stress response, suggesting that a reactive oxygen species (ROS) burst plays a critical role in HI. In support of this, we further discovered that a simple chemical treatment of pollen with ROS reagents could lead to HI. Moreover, we identified ZmPOD65, which encodes a sperm-specific peroxidase, as a new gene controlling HI. Taken together, our study revealed a likely mechanism of HI, discovered a new gene controlling HI, and created a new method for HI in maize, indicating the importance of ROS balance in maintaining normal reproduction and providing a potential route to accelerate crop breeding.

Matrilineal empowers wheat pollen with haploid induction potency by triggering postmitosis reactive oxygen species activity

Reactive oxygen species (ROS) play important roles during anther and pollen development. DNA damage may cause chromosome fragmentation that is considered to underlie chromosome elimination for haploid induction by matrilineal pollen, a key step in MATRILINEAL-based double haploid breeding technology. But when and how DNA damage occurs is unknown. We performed comparative studies of wheat pollens from the wild-type and the CRISPR/Cas9 edited matrilineal mutant (mMTL). Chemical assays detected a second wave of ROS in mMTL pollen at the three-nuclei-stage and subsequently, along with reduced antioxidant enzyme activities. RNA-seq analysis revealed disturbed expression of genes for fatty acid biosynthesis and ROS homoeostasis. Gas chromatography-mass spectrometry measurement identified abnormal fatty acid metabolism that may contribute to defective mMTL pollen walls as observed using electron microscopy, consistent with the function of MTL as a phospholipase. Moreover, DNA damage was identified using TdT-mediated dUTP nick-end labelling and quantified using comet assays. Velocity patterns showed that ROS increments preceded that of DNA damage over the course of pollen maturation. Our work hypothesises that mMTL-triggered later-stage-specific ROS causes DNA damage that may contribute to chromosome fragmentation and hence chromosome elimination during haploid induction. These findings may provide more ways to accelerate double haploid-based plant breeding.

Epigenetically mismatched parental centromeres trigger genome elimination in hybrids

Wide crosses result in postzygotic elimination of one parental chromosome set, but the mechanisms that result in such differential fate are poorly understood. Here, we show that alterations of centromeric histone H3 (CENH3) lead to its selective removal from centromeres of mature Arabidopsis eggs and early zygotes, while wild-type CENH3 persists. In the hybrid zygotes and embryos, CENH3 and essential centromere proteins load preferentially on the CENH3-rich centromeres of the wild-type parent, while CENH3-depleted centromeres fail to reconstitute new CENH3-chromatin and the kinetochore and are frequently lost. Genome elimination is opposed by E3 ubiquitin ligase VIM1. We propose a model based on cooperative binding of CENH3 to chromatin to explain the differential CENH3 loading rates. Thus, parental CENH3 polymorphisms result in epigenetically distinct centromeres that instantiate a strong mating barrier and produce haploids.

Genetic characteristics and ploidy trigger the high inducibility of double haploid (DH) inducer in Brassica napus

BACKGROUND

Our recently reported doubled haploid (DH) induction lines e.g., Y3380 and Y3560 are allo-octoploid (AAAACCCC, 2n = 8× ≈ 76), which can induce the maternal parent to produce DH individuals. Whether this induction process is related to the production of aneuploid gametes form male parent and genetic characteristics of the male parent has not been reported yet.

RESULTS

Somatic chromosome counts of DH inducer parents, female wax-less parent (W1A) and their F₁ hybrid individuals revealed the reliability of flow cytometry analysis. Y3560 has normal chromosome behavior in metaphase I and anaphase I, but chromosome division was not synchronized in the tetrad period. Individual phenotypic identification and flow cytometric fluorescence measurement of F₁ individual and parents revealed that DH individuals can be distinguished on the basis of waxiness trait. The results of phenotypic identification and flow cytometry can identify the homozygotes or heterozygotes of F₁ generation individuals. The data of SNP genotyping coupled with phenotypic waxiness trait revealed that the genetic distance between W1A and F₁ homozygotes were smaller as compared to their heterozygotes. It was found that compared with allo-octoploids, aneuploidy from allo-octoploid segregation did not significantly increase the DH induction rate, but reduced male infiltration rate and heterozygous site rate of induced F₁ generation. The ploidy, SNP genotyping and flow cytometry results cumulatively shows that DH induction is attributed to the key genes regulation from the parents of Y3560 and Y3380, which significantly increase the induction efficiency as compared to ploidy.

CONCLUSION

Based on our findings, we hypothesize that genetic characteristics and aneuploidy play an important role in the induction of DH individuals in Brassca napus, and the induction process has been explored. It provides an important insight for us to locate and clone the genes that regulate the inducibility in the later stage.

Karyotype Reorganization in Wheat-Rye Hybrids Obtained via Unreduced Gametes: Is There a Limit to the Chromosome Number in Triticale?

To date, few data have been accumulated on the contribution of meiotic restitution to the formation of Triticum aestivum hybrid karyotypes. In this study, based on FISH and C-banding, karyotype reorganization was observed in three groups of F₅ wheat–rye hybrids 1R(1A) × R. Aberrations, including aneuploidy, telocentrics, and Robertsonian translocations, were detected in all groups. Some of the Group 1 plants and all of the Group 2 plants only had a 4R4R pair (in addition to 1R1R), which was either added or substituted for its homeolog in ABD subgenomes. In about 82% of meiocytes, 4R4R formed bivalents, which indicates its competitiveness. The rest of the Group 1 plants had 2R and 7R chromosomes in addition to 1R1R. Group 3 retained all their rye chromosomes, with a small aneuploidy on the wheat chromosomes. A feature of the meiosis in the Group 3 plants was asynchronous cell division and omission of the second division. Diploid gametes did not form because of the significant disturbances during gametogenesis. As a result, the frequency of occurrence of the formed dyads was negatively correlated (r = −0.73) with the seed sets. Thus, meiotic restitution in the 8n triticale does not contribute to fertility or increased ploidy in subsequent generations.

Maize In Planta Haploid Inducer Lines: A Cornerstone for Doubled Haploid Technology

Doubled haploid (DH) technology produces strictly homozygous fertile plant thanks to doubling the chromosomes of a haploid embryo/seedling. Haploid embryos are derived from either male or female germ line cells and hold only half the number of chromosomes found in somatic plant tissues, albeit in a recombinant form due to meiotic genetic shuffling. DH production allows to rapidly fix these recombinant haploid genomes in the form of perfectly homozygous plants (inbred lines), which are produced in two rather than six or more generations. Thus, DH breeding enables fast evaluation of phenotypic traits on homogenous progeny. While for most crops haploid embryos are produced by costly and often genotype-dependent in vitro methods, for maize, two unique in planta systems are available to induce haploid embryos directly in the seed. Two "haploid inducer lines", identified from spontaneous maize mutants, are able to induce embryos of paternal or maternal origin. Although effortless crosses with lines of interest are sufficient to trigger haploid embryos, substantial improvements were necessary to bring DH technology to large scale production. They include the development of modern haploid inducer lines with high induction rates (8-12%), and methods to sort kernels with haploid embryos from the normal ones. Chromosome doubling represents also a crucial step in the DH process. Recent identification of genomic loci involved in spontaneous doubling opens up perspectives for a fully in planta DH pipeline in maize. Although discovered more than 60 years ago, maize haploid inducer lines still make headlines thanks to novel applications and findings. Indeed, maternal haploid induction was elegantly diverted to deliver genome editing machinery in germplasm recalcitrant to transformation techniques. The recent discovery of two molecular players controlling haploid induction allowed to revisit the mechanistic basis of maize maternal haploid induction and to successfully translate haploid induction ability to other crops.

Rewiring Meiosis for Crop Improvement

Meiosis is a specialized cell division that contributes to halve the genome content and reshuffle allelic combinations between generations in sexually reproducing eukaryotes. During meiosis, a large number of programmed DNA double-strand breaks (DSBs) are formed throughout the genome. Repair of meiotic DSBs facilitates the pairing of homologs and forms crossovers which are the reciprocal exchange of genetic information between chromosomes. Meiotic recombination also influences centromere organization and is essential for proper chromosome segregation. Accordingly, meiotic recombination drives genome evolution and is a powerful tool for breeders to create new varieties important to food security. Modifying meiotic recombination has the potential to accelerate plant breeding but it can also have detrimental effects on plant performance by breaking beneficial genetic linkages. Therefore, it is essential to gain a better understanding of these processes in order to develop novel strategies to facilitate plant breeding. Recent progress in targeted recombination technologies, chromosome engineering, and an increasing knowledge in the control of meiotic chromosome segregation has significantly increased our ability to manipulate meiosis. In this review, we summarize the latest findings and technologies on meiosis in plants. We also highlight recent attempts and future directions to manipulate crossover events and control the meiotic division process in a breeding perspective.

Understanding and exploiting uniparental genome elimination in plants: insights from Arabidopsis thaliana

Uniparental genome elimination (UGE) refers to the preferential exclusion of one set of the parental chromosome complement during embryogenesis following successful fertilization, giving rise to uniparental haploid progeny. This artificially induced phenomenon was documented as one of the consequences of distant (wide) hybridization in plants. Ten decades since its discovery, attempts to unravel the molecular mechanism behind this process remained elusive due to a lack of genetic tools and genomic resources in the species exhibiting UGE. Hence, its successful adoption in agronomic crops for in planta (in vivo) haploid production remains implausible. Recently, Arabidopsis thaliana has emerged as a model system to unravel the molecular basis of UGE. It is now possible to simulate the genetic consequences of distant crosses in an A. thaliana intraspecific cross by a simple modification of centromeres, via the manipulation of the centromere-specific histone H3 variant gene, CENH3. Thus, the experimental advantages conferred by A. thaliana have been used to elucidate and exploit the benefits of UGE in crop breeding. In this review, we discuss developments and prospects of CENH3 gene-mediated UGE and other in planta haploid induction strategies to illustrate its potential in expediting plant breeding and genetics in A. thaliana and other model plants.

Maternal karyogene and cytoplasmic genotype affect the induction efficiency of doubled haploid inducer in Brassica napus

BACKGROUND

Artificial synthesis of octoploid rapeseed double haploid (DH) induction lines Y3380 and Y3560 was made possible by interspecific hybridization and genome doubling techniques. Production of pure lines by DH induction provides a new way to achieve homozygosity earlier in B.napus. Previously, the mechanism of induction, and whether the induction has obvious maternal genotypic differences or not, are not known so far.

RESULTS

In this study, different karyogene and cytoplasmic genotype of B.napus were pollinated with the previously reported DH inducers e.g. Y3380 and Y3560. Our study presents a fine comparison of different cytoplasmic genotypes hybridization to unravel the mechanism of DH induction. Ploidy identification, fertility and SSR marker analysis of induced F₁ generation, revealed that ploidy and phenotype of the induced F₁ plants were consistent with that type of maternal, rather than paternal parent. The SNP chip analysis revealed that induction efficiency of DH inducers were affected by the karyogene when the maternal cytoplasmic genotypes were the same. However, DH induction efficiency was also affected by cytoplasmic genotype when the karyogenes were same, and the offspring of the ogura cytoplasm showed high frequency inducer gene hybridization or low-frequency infiltration.

CONCLUSION

The induction effect is influenced by the interaction between maternal karyogene and cytoplasmic genotype, and the results from the partial hybridization of progeny chromosomes indicate that the induction process may be attributed to the selective elimination of paternal chromosome. This study provides a basis for exploring the mechanism of DH inducer in B.napus, and provides new insights for utilization of inducers in molecular breeding.

Uniparental Genome Elimination in Australian Carp Gudgeons

Metazoans usually reproduce sexually, blending the unique identity of parental genomes for the next generation through functional crossing-over and recombination in meiosis. However, some metazoan lineages have evolved reproductive systems where offspring are either full (clonal) or partial (hemiclonal) genetic replicas. In the latter group, the process of uniparental genome elimination selectively eliminates either the maternal or paternal genome from germ cells, and only one parental genome is selected for transmission. Although fairly common in plants, hybridogenesis (i.e., clonal haploidization via chromosome elimination) remains a poorly understood process in animals. Here, we explore the proximal cytogenomic mechanisms of somatic and germ cell chromosomes in sexual and hybrid genotypes of Australian carp gudgeons (Hypseleotris) by tracing the fate of each set during mitosis (in somatic tissues) and meiosis (in gonads). Our comparative study of diploid hybrid and sexual individuals revealed visually functional gonads in male and female hybrid genotypes and generally high karyotype variability, although the number of chromosome arms remains constant. Our results delivered direct evidence for classic hybridogenesis as a reproductive mode in carp gudgeons. Two parental sets with integral structure in the hybrid soma (the F1 constitution) contrasted with uniparental chromosomal inheritance detected in gonads. The inheritance mode happens through premeiotic genome duplication of the parental genome to be transmitted, whereas the second parental genome is likely gradually eliminated already in juvenile individuals. The role of metacentric chromosomes in hybrid evolution is also discussed.

Centromere Engineering as an Emerging Tool for Haploid Plant Production: Advances and Challenges

Haploid production is of great importance in plant breeding programs. Doubled haploid technology accelerates the generation of inbred lines with homozygosity in all loci in a single year. Haploids can be induced in vitro via cultivating the haploid gametes or in vivo through inter- and intraspecific hybridization. Haploid induction through centromere engineering is a novel system that is theoretically applicable to many plant species. The present review chapter discusses the proposed molecular mechanisms of selective chromosome elimination in early embryogenesis and the effects of kinetochore component modifications on proper chromosome segregation. Finally, the advantages and limitations of the CENH3-mediated haploidization approach and its applications are highlighted.

Overview of In Vitro and In Vivo Doubled Haploid Technologies

Doubled haploids (DH) have become a powerful tool to assist in different basic research studies, and also in applied research. The principal (but not the only) and routine use of DH by breeding companies is to produce pure lines for hybrid seed production in different crop species. Several decades after the discovery of haploid inducer lines in maize and of anther culture as a method to produce haploid plants from pollen precursors, the biotechnological revolution of the last decades allowed to the development of a variety of approaches to pursue the goal of doubled haploid production. Now, it is possible to produce haploids and DHs in many different species, because when a method does not work properly, there are several others to test. In this chapter, we overview the currently available approaches used to produce haploids and DHs by using methods based on in vitro culture, or involving the in vivo induction of haploid embryo development, or a combination of both.

Haploid induction by a maize cenh3 null mutant

The production of haploids is an important first step in creating many new plant varieties. One approach used in Arabidopsis involves crossing plants expressing different forms of centromeric histone H3 (CENP-A/CENH3) and subsequent loss of genome with weaker centromeres. However, the method has been ineffective in crop plants. Here, we describe a greatly simplified method based on crossing maize lines that are heterozygous for a cenh3 null mutation. Crossing +/cenh3 to wild-type plants in both directions yielded haploid progeny. Genome elimination was determined by the cenh3 genotype of the gametophyte, suggesting that centromere failure is caused by CENH3 dilution during the postmeiotic cell divisions that precede gamete formation. The cenh3 haploid inducer works as a vigorous hybrid and can be transferred to other lines in a single cross, making it versatile for a variety of applications.

Meiotic crossover reduction by virus-induced gene silencing enables the efficient generation of chromosome substitution lines and reverse breeding in Arabidopsis thaliana

Plant breeding applications exploiting meiotic mutant phenotypes (like the increase or decrease of crossover (CO) recombination) have been proposed over the last years. As recessive meiotic mutations in breeding lines may affect fertility or have other pleiotropic effects, transient silencing techniques may be preferred. Reverse breeding is a breeding technique that would benefit from the transient downregulation of CO formation. The technique is essentially the opposite of plant hybridization: a method to extract parental lines from a hybrid. The method can also be used to efficiently generate chromosome substitution lines (CSLs). For successful reverse breeding, the two homologous chromosome sets of a heterozygous plant must be divided over two haploid complements, which can be achieved by the suppression of meiotic CO recombination and the subsequent production of doubled haploid plants. Here we show the feasibility of transiently reducing CO formation using virus-induced gene silencing (VIGS) by targeting the meiotic gene MSH5 in a wild-type heterozygote of Arabidopsis thaliana. The application of VIGS (rather than using lengthy stable transformation) generates transgene-free offspring with the desired genetic composition: we obtained parental lines from a wild-type heterozygous F1 in two generations. In addition, we obtained 20 (of the 32 possible) CSLs in one experiment. Our results demonstrate that meiosis can be modulated at will in A. thaliana to generate CSLs and parental lines rapidly for hybrid breeding. Furthermore, we illustrate how the modification of meiosis using VIGS can open routes to develop efficient plant breeding strategies.

A variety of changes, including CRISPR/Cas9-mediated deletions, in CENH3 lead to haploid induction on outcrossing

Creating true-breeding lines is a critical step in plant breeding. Novel, completely homozygous true-breeding lines can be generated by doubled haploid technology in single generation. Haploid induction through modification of the centromere-specific histone 3 variant (CENH3), including chimeric proteins, expression of non-native CENH3 and single amino acid substitutions, has been shown to induce, on outcrossing to wild type, haploid progeny possessing only the genome of the wild-type parent, in Arabidopsis thaliana. Here, we report the characterization of 31 additional EMS-inducible amino acid substitutions in CENH3 for their ability to complement a knockout in the endogenous CENH3 gene and induce haploid progeny when pollinated by the wild type. We also tested the effect of double amino acid changes, which might be generated through a second round of EMS mutagenesis. Finally, we report on the effects of CRISPR/Cas9-mediated in-frame deletions in the αN helix of the CENH3 histone fold domain. Remarkably, we found that complete deletion of the αN helix, which is conserved throughout angiosperms, results in plants which exhibit normal growth and fertility while acting as excellent haploid inducers when pollinated by wild-type pollen. Both of these technologies, CRISPR mutagenesis and EMS mutagenesis, represent non-transgenic approaches to the generation of haploid inducers.

Maternal inheritance of centromeres through the germline

The centromere directs chromosome segregation but is not itself genetically encoded. In most species, centromeres are epigenetically defined by the presence of a histone H3 variant CENP-A, independent of the underlying DNA sequence. Therefore, to maintain centromeres and ensure accurate chromosome segregation, CENP-A nucleosomes must be inherited across generations through the germline. In this chapter we discuss three aspects of maternal centromere inheritance. First, we propose mechanisms for maintaining CENP-A nucleosomes through the prolonged prophase arrest in mammalian oocytes. Second, we review mechanisms by which selfish centromeres bias their transmission through female meiosis. Third, we discuss regulation of centromere size through early embryonic development.

Supernumerary B chromosomes of Aegilops speltoides undergo precise elimination in roots early in embryo development

Not necessarily all cells of an organism contain the same genome. Some eukaryotes exhibit dramatic differences between cells of different organs, resulting from programmed elimination of chromosomes or their fragments. Here, we present a detailed analysis of programmed B chromosome elimination in plants. Using goatgrass Aegilops speltoides as a model, we demonstrate that the elimination of B chromosomes is a strictly controlled and highly efficient root-specific process. At the onset of embryo differentiation B chromosomes undergo elimination in proto-root cells. Independent of centromere activity, B chromosomes demonstrate nondisjunction of chromatids and lagging in anaphase, leading to micronucleation. Chromatin structure and DNA replication differ between micronuclei and primary nuclei and degradation of micronucleated DNA is the final step of B chromosome elimination. This process might allow root tissues to survive the detrimental expression, or overexpression of B chromosome-located root-specific genes with paralogs located on standard chromosomes.

B chromosomes are supernumerary chromosomes exhibiting dramatic differences between different organs in same species. Here, the authors show programmed B chromosome elimination in goatgrass starts at the onset of embryo differentiation by nondisjunction of chromatids, anaphase lagging, and ends with the degradation of micronucleated DNA.

Puzzling out plant reproduction by haploid induction for innovations in plant breeding

Mixing maternal and paternal genomes in embryos is not only responsible for the evolutionary success of sexual reproduction, but is also a cornerstone of plant breeding. However, once an interesting gene combination is obtained, further genetic mixing is problematic. To rapidly fix genetic information, doubled haploid plants can be produced: haploid embryos having solely the genetic information from one parent are allowed to develop, and chromosome doubling generates fully homozygous plants. A powerful path to the production of doubled haploids is based on haploid inducer lines. A simple cross between a haploid inducer line and the line with gene combinations to be fixed will trigger haploid embryo development. However, the exact mechanism behind in planta haploid induction remains an enduring mystery. The recent discoveries of molecular actors triggering haploid induction in the maize crop and the model Arabidopsis thaliana pinpoint an essential role of processes related to gamete development, gamete interactions and genome stability. These findings enabled translation of haploid induction capacity to other crops as well as the use of haploid inducer lines to deliver genome editing machinery into various crop varieties. These recent advances not only hold promise for the next generations of plant breeding strategies, but they also provide a deeper insight into the fundamental bases of sexual reproduction in plants.

Micronuclei in germ cells of hybrid frogs from Pelophylax esculentus complex contain gradually eliminated chromosomes

In most organisms, cells typically maintain genome integrity, as radical genome reorganization leads to dramatic consequences. However, certain organisms, ranging from unicellular ciliates to vertebrates, are able to selectively eliminate specific parts of their genome during certain stages of development. Moreover, partial or complete elimination of one of the parental genomes occurs in interspecies hybrids reproducing asexually. Although several examples of this phenomenon are known, the molecular and cellular processes involved in selective elimination of genetic material remain largely undescribed for the majority of such organisms. Here, we elucidate the process of selective genome elimination in water frog hybrids from the Pelophylax esculentus complex reproducing through hybridogenesis. Specifically, in the gonads of diploid and triploid hybrids, but not those of the parental species, we revealed micronuclei in the cytoplasm of germ cells. In each micronucleus, only one centromere was detected with antibodies against kinetochore proteins, suggesting that each micronucleus comprises a single chromosome. Using 3D-FISH with species-specific centromeric probe, we determined the role of micronuclei in selective genome elimination. We found that in triploid LLR hybrids, micronuclei preferentially contain P. ridibundus chromosomes, while in diploid hybrids, micronuclei preferentially contain P. lessonae chromosomes. The number of centromere signals in the nuclei suggested that germ cells were aneuploid until they eliminate the whole chromosomal set of one of the parental species. Furthermore, in diploid hybrids, misaligned P. lessonae chromosomes were observed during the metaphase stage of germ cells division, suggesting their possible elimination due to the inability to attach to the spindle and segregate properly. Additionally, we described gonocytes with an increased number of P. ridibundus centromeres, indicating duplication of the genetic material. We conclude that selective genome elimination from germ cells of diploid and triploid hybrids occurs via the gradual elimination of individual chromosomes of one of the parental genomes, which are enclosed within micronuclei.

Recombination Pattern Characterization via Simulation Using Different Maize Populations

Efficient recombination is critical to both plant breeding and gene cloning. However, almost all traditional recombination studies and genetic improvements require the slow and labor-intensive population construction process, and little is known about the recombination characteristics of populations of different types, generations, and origins. Here, we provide a simple and efficient simulation method for population construction based on doubled haploid (DH) and intermated B73 × Mo17 maize (IBM) populations to predict the recombination pattern. We found that the chromosomes had 0, 1, 2, and 3 recombination events that occurred at rates of 0.16, 0.30, 0.23, and 0.15, respectively, in the DH and the recombination rate of each chromosome in the IBM population ranged from 0 to 12.1 cM per 125 kb. Based on the observed recombination parameters, we estimated the number of recombination events and constructed the linkage maps of the simulated DH and recombination inbred line (RIL) populations. These simulated populations exhibited similar recombination patterns compared with the real populations, suggesting the feasibility of this simulation approach. We then compared the recombination rates of the simulated populations of different types (DH induced or self-crossed), generations, and origins (using the 8, 16, and 32 multiparent advanced generation intercross (MAGIC) populations), and suggested a rapid and cost-effective population construction procedure for breeders and geneticists, while maintaining an optimal recombination rate. This study offers a convenient method for optimizing the population construction process and has broader implications for other crop species, thereby facilitating future population studies and genetic improvement strategies.

Efficient induction of haploid plants in wheat by editing of TaMTL using an optimized Agrobacterium-mediated CRISPR system

The use of CRISPR/LbCpf1 and CRISPR/xCas9 systems in wheat have not yet been reported. In this study, we compared the efficiencies of three CRISPR editing systems (SpCas9, LbCpf1, and xCas9), and three different promoters (OsU6a, TaU3, and TaU6) that drive single-guide (sg)RNA, which were introduced into wheat via Agrobacterium-mediated transformation. The results indicated that TaU3 was a better choice than OsU6a or TaU6. The editing efficiency was higher using two sgRNAs than one sgRNA, and mutants with a large fragment deletion between the two sgRNAs were produced. The LbCpf1 and xCas9 systems could both be used successfully. Two endogenous genes, TaWaxy and TaMTL, were edited with high efficiency by the optimized SpCas9 system, with the highest efficiency (80.5%) being achieved when using TaU3 and two sgRNAs to target TaWaxy. Rates of seed set in the TaMTL-edited T0 transgenic plants were much lower than that of the wild-type. A haploid induction rate of 18.9% was found in the TaMTL-edited T1 plants using the CRISPR/SpCas9 system. Mutants with reverse insertion of the deleted sequences of TaMTL and TaWaxy between the two sgRNAs were identified in the edited T0 plants. In addition, wheat grains lacking embryos or endosperms were observed in the TaMTL-edited T1 generation.

Crop Phenomics and High-Throughput Phenotyping: Past Decades, Current Challenges, and Future Perspectives

Since whole-genome sequencing of many crops has been achieved, crop functional genomics studies have stepped into the big-data and high-throughput era. However, acquisition of large-scale phenotypic data has become one of the major bottlenecks hindering crop breeding and functional genomics studies. Nevertheless, recent technological advances provide us potential solutions to relieve this bottleneck and to explore advanced methods for large-scale phenotyping data acquisition and processing in the coming years. In this article, we review the major progress on high-throughput phenotyping in controlled environments and field conditions as well as its use for post-harvest yield and quality assessment in the past decades. We then discuss the latest multi-omics research combining high-throughput phenotyping with genetic studies. Finally, we propose some conceptual challenges and provide our perspectives on how to bridge the phenotype-genotype gap. It is no doubt that accurate high-throughput phenotyping will accelerate plant genetic improvements and promote the next green revolution in crop breeding.

Genomic Outcomes of Haploid Induction Crosses in Potato (Solanum tuberosum L.)

The challenges of breeding autotetraploid potato (Solanum tuberosum) have motivated the development of alternative breeding strategies. A common approach is to obtain uniparental dihaploids from a tetraploid of interest through pollination with S. tuberosum Andigenum Group (formerly S. phureja) cultivars. The mechanism underlying haploid formation of these crosses is unclear, and questions regarding the frequency of paternal DNA transmission remain. Previous reports have described aneuploid and euploid progeny that, in some cases, displayed genetic markers from the haploid inducer (HI). Here, we surveyed a population of 167 presumed dihaploids for large-scale structural variation that would underlie chromosomal addition from the HI, and for small-scale introgression of genetic markers. In 19 progeny, we detected 10 of the 12 possible trisomies and, in all cases, demonstrated the noninducer parent origin of the additional chromosome. Deep sequencing indicated that occasional, short-tract signals appearing to be of HI origin were better explained as technical artifacts. Leveraging recurring copy number variation patterns, we documented subchromosomal dosage variation indicating segregation of polymorphic maternal haplotypes. Collectively, 52% of the assayed chromosomal loci were classified as dosage variable. Our findings help elucidate the genomic consequences of potato haploid induction and suggest that most potato dihaploids will be free of residual pollinator DNA.

Plasticity in Triticeae centromere DNA sequences: a wheat × tall wheatgrass (decaploid) model

Centromeres mediate chromosome attachment to microtubules and maintain the integrity of chromosomes for proper segregation of the sister chromatids during cell division. Advances in the assembly of Triticeae genome sequences combined with the capacity to recover hybrid species derived from very distantly related species provides potential experimental systems for linking retrotransposon amplification and repositioning of centromeres via non-mendelian inheritance in partial amphiploid breeds. The decaploid tall wheatgrass (Thinopyrum ponticum) is one of the most successfully used perennial species in wheat breeding for generating translocation lines with valuable agronomic traits. We found that wheat centromere retrotransposons CRW and Quinta widely occur within the tall wheatgrass genome. In addition, one of the genome donors to Th. ponticum, Pseudoroegneria stipifolia (StSt), has been shown to have Abigail and a satellite repeat, CentSt. We also found two other centromeric retrotransposons, Abia and CL135 in Th. ponticum by ChIP-seq. Examination of partial amphiploid lines that were generated in the 1970s demonstrated extensive modification in centromere sequences using CentSt, Abigail and Abia as probes. We also detected that St-genome chromosomes were more enriched with Abigail and CentSt, whereas E-genome chromosomes were enriched with CRW and Quinta in tall wheatgrass and its closer relatives. It can be concluded that bursts of transposition of retrotransposons and repositioning of centromeres via non-mendelian segregation are common in partial amphiploids derived from interspecific hybrids. Practically speaking, our study reveals that the existence of homologous centromere functional sequences in both a donor and its receptor can substantially contribute to the successful transfer of alien genes into crop species. OPEN RESEARCH BADGES: This article has earned an Open Data Badge for making publicly available the digitally-shareable data necessary to reproduce the reported results. The data is available at https://www.ncbi.nlm.nih.gov/sra/SRR9089557; https://www.ncbi.nlm.nih.gov/sra/SRR9089558; https://www.ncbi.nlm.nih.gov/sra/SRR9089559; https://www.ncbi.nlm.nih.gov/sra/SRR9089560; https://www.ncbi.nlm.nih.gov/sra/SRR9089561; https://www.ncbi.nlm.nih.gov/sra/SRR9089562; https://www.ncbi.nlm.nih.gov/sra/SRR9089563; https://www.ncbi.nlm.nih.gov/sra/SRR9089564; https://www.ncbi.nlm.nih.gov/nuccore/MK999394; https://www.ncbi.nlm.nih.gov/nuccore/MK999395; https://www.ncbi.nlm.nih.gov/nuccore/MK999396.

Composition and random elimination of paternal chromosomes in a large population of wheat × barley (Triticum aestivum L. × Hordeum vulgare L.) hybrids

Statistical analysis of the chromosomal composition in a population of 210 primary plants regenerated from two intergeneric wheat-barley cross combinations revealed the random nature of uniparental elimination for barley chromosomes. Uniparental chromosome elimination is a common process in interspecific and intergeneric cereal hybrids. To characterize the frequency of paternal chromosomes, a population of 218 independent green plants was generated from two wheat (♀) × barley (♂) cross combinations via embryo rescue. The chromosomal composition of 210 primary plants was analyzed with chromosome-specific DNA markers representing all seven barley chromosomes. The analysis revealed an equal proportion of haploid and full hybrids (20.5% and 19.5%, respectively), while the rest of the population contained hypoploids (partial hybrids) with no preference for any possible numbers (one to six) of barley chromosome additions. Contrary to the previous reports, there was no statistical bias or preferential elimination for any individual barley chromosome (1H-7H) in this population. The reasons for the apparent contradiction and the implications of the above findings for cereal breeding are discussed.

Partitioning Apomixis Components to Understand and Utilize Gametophytic Apomixis

Apomixis is a method of reproduction to generate clonal seeds and offers tremendous potential to fix heterozygosity and hybrid vigor. The process of apomictic seed development is complex and comprises three distinct components, viz., apomeiosis (leading to formation of unreduced egg cell), parthenogenesis (development of embryo without fertilization) and functional endosperm development. Recently, in many crops, these three components are reported to be uncoupled leading to their partitioning. This review provides insight into the recent status of our understanding surrounding partitioning apomixis components in gametophytic apomictic plants and research avenues that it offers to help understand the biology of apomixis. Possible consequences leading to diversity in seed developmental pathways, resources to understand apomixis, inheritance and identification of candidate gene(s) for partitioned components, as well as contribution towards creation of variability are all discussed. The potential of Panicum maximum, an aposporous crop, is also discussed as a model crop to study partitioning principle and effects. Modifications in cytogenetic status, as well as endosperm imprinting effects arising due to partitioning effects, opens up new opportunities to understand and utilize apomixis components, especially towards synthesizing apomixis in crops.