Assembly and Function of the Bacillus anthracis S-Layer

Does Phage Therapy Need a Pan-Phage?

The emergence of multidrug-resistant bacteria is undoubtedly one of the most serious global health threats. One response to this threat that has been gaining momentum over the past decade is 'phage therapy'. According to this, lytic bacteriophages are used for the treatment of bacterial infections, either alone or in combination with antimicrobial agents. However, to ensure the efficacy and broad applicability of phage therapy, several challenges must be overcome. These challenges encompass the development of methods and strategies for the host range manipulation and bypass of the resistance mechanisms developed by pathogenic bacteria, as has been the case since the advent of antibiotics. As our knowledge and understanding of the interactions between phages and their hosts evolves, the key issue is to define the host range for each application. In this article, we discuss the factors that affect host range and how this determines the classification of phages into different categories of action. For each host range group, recent representative examples are provided, together with suggestions on how the different groups can be used to combat certain types of bacterial infections. The available methodologies for host range expansion, either through sequential adaptation to a new pathogen or through genetic engineering techniques, are also reviewed.

Dual function of OmpM as outer membrane tether and nutrient uptake channel in diderm Firmicutes

The outer membrane (OM) in diderm, or Gram-negative, bacteria must be tethered to peptidoglycan for mechanical stability and to maintain cell morphology. Most diderm phyla from the Terrabacteria group have recently been shown to lack well-characterised OM attachment systems, but instead have OmpM, which could represent an ancestral tethering system in bacteria. Here, we have determined the structure of the most abundant OmpM protein from Veillonella parvula (diderm Firmicutes) by single particle cryogenic electron microscopy. We also characterised the channel properties of the transmembrane β-barrel of OmpM and investigated the structure and PG-binding properties of its periplasmic stalk region. Our results show that OM tethering and nutrient acquisition are genetically linked in V. parvula, and probably other diderm Terrabacteria. This dual function of OmpM may have played a role in the loss of the OM in ancestral bacteria and the emergence of monoderm bacterial lineages.

Structure and function of the EA1 surface layer of Bacillus anthracis

The Gram-positive spore-forming bacterium Bacillus anthracis is the causative agent of anthrax, a deadly disease mostly affecting wildlife and livestock, as well as representing a bioterrorism threat. Its cell surface is covered by the mutually exclusive S-layers Sap and EA1, found in early and late growth phases, respectively. Here we report the nanobody-based structural characterization of EA1 and its native lattice contacts. The EA1 assembly domain consists of 6 immunoglobulin-like domains, where three calcium-binding sites structure interdomain contacts that allow monomers to adopt their assembly-competent conformation. Nanobody-induced depolymerization of EA1 S-layers results in surface defects, membrane blebbing and cell lysis under hypotonic conditions, indicating that S-layers provide additional mechanical stability to the cell wall. Taken together, we report a complete model of the EA1 S-layer and present a set of nanobodies that may have therapeutic potential against Bacillus anthracis.

S-layer is a key element in metabolic response and entry into the stationary phase in Bacillus cereus AH187

Bacillus cereus is a food-borne Gram-positive pathogen. The emetic reference strain B. cereus AH187 is surrounded by a proteinaceous surface layer (S-layer) that contributes to its physico-chemical surface properties, and promotes its adhesion in response to starvation conditions. The S-layer produced by B. cereus AH187 is composed of two proteins, SL2 and EA1, which are incorporated at different growth stages. Here, we showed that deletion of the genes encoding SL2 and EA1 produced viable cells, but decreased the glucose uptake rate at the start of growth, and induced extensive reorganization of the cellular and exoproteomes upon entry into the stationary phase. As a consequence, stationary cells were less resistant to abiotic stress. Taken together, our data indicate that the S-layer is crucial but comes at a metabolic cost that modulates the stationary phase response. SIGNIFICANCE: The emetic strains of Bacillus cereus are known to cause severe food poisoning, making it crucial to understand the factors contributing to their selective enrichment in foods. Most emetic strains are surrounded by a crystalline S-layer, which is a costly protein structure to produce. In this study, we used high-throughput proteomics to investigate how S-layer synthesis affects the allocation of cellular resources in the emetic B. cereus strain AH187. Our results demonstrate that the synthesis of the S-layer plays a crucial role in the pathogen's ability to thrive under stationary growth phase conditions by modulating the stress response, thereby promoting its lifestyle as an emetic pathogen. We conclude that the synthesis of the S-layer is a critical adaptation for emetic B. cereus to successfully colonize specific niches.

Molecular modelling and site-directed mutagenesis provide insight into saccharide pyruvylation by the Paenibacillus alvei CsaB enzyme

Pyruvylation is a biologically versatile but mechanistically unexplored saccharide modification. 4,6-Ketal pyruvylated N-acetylmannosamine within bacterial secondary cell wall polymers serves as a cell wall anchoring epitope for proteins possessing a terminal S-layer homology domain trimer. The pyruvyltransferase CsaB from Paenibacillus alvei served as a model to investigate the structural basis of the pyruvyltransfer reaction by a combination of molecular modelling and site-directed mutagenesis together with an enzyme assay using phosphoenolpyruvate (PEP; donor) and synthetic β-D-ManNAc-(1 → 4)-α-D-GlcNAc-diphosphoryl-11-phenoxyundecyl (acceptor). CsaB protein structure modelling was done using Phyre2 and I-Tasser based on the partial crystal structure of the Schizosaccharomyces pombe pyruvyltransferase Pvg1p and by AlphaFold. The models informed the construction of twelve CsaB mutants targeted at plausible PEP and acceptor binding sites and KM and kcat values were determined to evaluate the mutants, indicating the importance of a loop region for catalysis. R148, H308 and K328 were found to be critical to PEP binding and insight into acceptor binding was obtained from an analysis of Y14 and F16 mutants, confirming the modelled binding sites and interactions predicted using Molecular Operating Environment. These data lay the basis for future mechanistic studies of saccharide pyruvylation as a novel target for interference with bacterial cell wall assembly.

Phage Adsorption to Gram-Positive Bacteria

The phage life cycle is a multi-stage process initiated by the recognition and attachment of the virus to its bacterial host. This adsorption step depends on the specific interaction between bacterial structures acting as receptors and viral proteins called Receptor Binding Proteins (RBP). The adsorption process is essential as it is the first determinant of phage host range and a sine qua non condition for the subsequent conduct of the life cycle. In phages belonging to the Caudoviricetes class, the capsid is attached to a tail, which is the central player in the adsorption as it comprises the RBP and accessory proteins facilitating phage binding and cell wall penetration prior to genome injection. The nature of the viral proteins involved in host adhesion not only depends on the phage morphology (i.e., myovirus, siphovirus, or podovirus) but also the targeted host. Here, we give an overview of the adsorption process and compile the available information on the type of receptors that can be recognized and the viral proteins taking part in the process, with the primary focus on phages infecting Gram-positive bacteria.

The SDBC is active in quenching oxidative conditions and bridges the cell envelope layers in Deinococcus radiodurans

Deinococcus radiodurans is known for its remarkable ability to withstand harsh stressful conditions. The outermost layer of its cell envelope is a proteinaceous coat, the S-layer, essential for resistance to and interactions with the environment. The S-layer Deinoxanthin-binding complex (SDBC), one of the main units of the characteristic multilayered cell envelope of this bacterium, protects against environmental stressors and allows exchanges with the environment. So far, specific regions of this complex, the collar and the stalk, remained unassigned. Here, these regions are resolved by cryo-EM and locally refined. The resulting 3D map shows that the collar region of this multiprotein complex is a trimer of the protein DR_0644, a Cu-only superoxide dismutase (SOD) identified here to be efficient in quenching reactive oxygen species. The same data also showed that the stalk region consists of a coiled coil that extends into the cell envelope for ∼280 Å, reaching the inner membrane. Finally, the orientation and localization of the complex are defined by in situ cryo-electron crystallography. The structural organization of the SDBC couples fundamental UV antenna properties with the presence of a Cu-only SOD, showing here coexisting photoprotective and chemoprotective functions. These features suggests how the SDBC and similar protein complexes, might have played a primary role as evolutive templates for the origin of photoautotrophic processes by combining primary protective needs with more independent energetic strategies.

Cytokine profile in <i>in vitro</i> mouse macrophage culture infected with <i>Bacillus anthracis</i> spores with varying plasmid composition

Bacillus anthracis, the causative agent of anthrax, is able to exist both in environmental conditions (soil) and in the macroorganism. The manifestation of pathogenic properties of B. anthracis strains is determined by relevant plasmid composition, because the main toxin and the capsule-related virulence factors are located in bacterial plasmid. Modeling anthrax infection in vitro in macrophage culture might reveal an influence of individual B. anthracis strain characteristics on infection and development of infectious process. The aim of this study was to analyze cytokine level during infection of in vitro macrophage cell cultures with spores of anthrax microbe strains bearing varying plasmid composition. The dependence of the macrophage cell cytokine profile on the plasmid composition of B. anthracis strains was revealed while modeling anthrax infection in vitro. The presence of the toxin-producing plasmid pXO1 in anthrax microbe strains has a powerful stimulating effect on the production of macrophages J774A cell line cytokines. B. anthracis strains lacking the pXO1 plasmid virtually stimulated no production of IL-1, caused very low secretion of IL-1, IL-6, MCP-1, MIP-1, MIP-1, IL-12 (p70) and active G-CSF products. The low cytokine response of macrophage cells infected with monoplasmid strains bearing only the capsule-forming plasmid was due not only to the absence of a binary toxin, but also to disturbed regulation of capsule production associated with the absence of the atxA gene. The capsule, along with lethal and edematous toxins, belongs to the main virulence factors of B. anthracis, but strains lacking the pXO1 virulence plasmid, had its production impaired, because the main regulator of capsule synthesis is the atxA gene localized on the pXO1 plasmid being positively regulated by the acpA and acpB genes, so that strains lacking the toxin-forming plasmid, even in the presence of the encapsulation plasmid, elicit a weak cytokine response in infected cells. Diplasmid strains of B. anthracis, due to produced main virulence factors a two-component toxin and a capsule, enforce macrophages (in the experiment) to actively produce IL-1, IL-6, MCP-1, G-CSF, MIP-1; MIP-1, IL-12 (p70). Strains with moderate virulence and capable of capsulation in air virtually did not differ from highly virulent strains in terms of their effect on in vitro macrophage culture.

Contribution of TagA-Like Glycosyltransferases to the Assembly of the Secondary Cell Wall Polysaccharide in Bacillus anthracis

Bacillus anthracis elaborates a secondary cell wall polysaccharide (SCWP) made of 6 to 12 trisaccharide units. Pyruvyl and acetyl substitutions of the distal unit are prerequisites for the noncovalent retention of 22 secreted Bacillus S-layer (Bsl)-associated proteins bearing an S-layer homology (SLH) domain. Surface display of Bsl proteins contributes to cell separation as well as virulence. Earlier work suggested that TagO initiates the synthesis of SCWP while GneY and GneZ, two UDP-GlcNAc 2-epimerases, synthesize ManNAc that is later incorporated in the repeat unit (→4)-ManNAc-(β1→4)-GlcNAc-(β1→6)-GlcNAc-(α1→). In organisms that synthesize wall teichoic acid, TagA catalysts have been shown to form the glycosidic bond ManNAc-(β1→4)-GlcNAc. Here, we show that genes bas2675 and bas5272, predicted to encode glycosyltransferases of the WecB/TagA/CpsF family (PFAM03808; CAZy GT26), are required for B. anthracis SCWP synthesis and S-layer assembly. Similar to tagO or gneY gneZ mutants, B. anthracis strains depleted of tagA1 (bas5272) cannot maintain cell shape, support vegetative growth, or synthesize SCWP. Expression of tagA2 (bas2675), or Staphylococcus aureus tagA on a plasmid, rescues the nonviable tagA1 mutant. We propose that TagA1 and TagA2 fulfill overlapping and key glycosyltransferase functions for the synthesis of repeat units of the SCWP of B. anthracis. IMPORTANCE Glycosyltransferases (GTs) catalyze the transfer of sugar moieties from activated donor molecules to acceptor molecules to form glycosidic bonds using a retaining or inverting mechanism. Based on the structural relatedness of their catalytic and carbohydrate-binding modules, GTs have been grouped into 115 families in the Carbohydrate-Active EnZyme (CAZy) database. For complex products, the functional assignment of GTs remains highly challenging without the knowledge of the chemical structure of the assembled polymer. Here, we propose that two uncharacterized GTs of B. anthracis belonging to the WecB/TagA/CpsF family incorporate ManNAc in repeat units of the secondary cell wall polymer of bacilli species.

Overlapping and Distinct Functions of the Paralogous PagR Regulators of Bacillus anthracis

The Bacillus anthracis pagA gene, encoding the protective antigen component of anthrax toxin, is part of a bicistronic operon on pXO1 that codes for its own repressor, PagR1. In addition to the pagAR1 operon, PagR1 regulates sap and eag, two chromosome genes encoding components of the surface layer, a mounting structure for surface proteins involved in virulence. Genomic studies have revealed a PagR1 paralog, PagR2, encoded by a gene on pXO2. The amino acid sequences of the paralogues are 71% identical and show similarity to the ArsR family of transcription regulators. We determined that the expression of either rPagR1 or rPagR2 in a ΔpagR1 pXO1⁺/pXO2^- (PagR1-PagR2) background repressed the expression of pagA, sap, eag, and a newly discovered target, atxA, encoding virulence activator AtxA. Despite the redundancy in PagR1 and PagR2 function, we determined that purified rPagR1 bound DNA corresponding to the control regions of all four target genes and existed as a dimer in cell lysates, whereas rPagR2 exhibited weak binding to the DNA of the pagA and atxA promoters, did not bind sap or eag promoter DNA, and did not appear as a dimer in cell lysates. A single amino acid change in PagR2, S81Y, designed to match the native Y81 of PagR1, allowed for DNA-binding to the sap and eag promoters. Moreover, the S81Y mutation allowed for the detection of PagR2 homomultimers in coaffinity purification experiments. Our results expand our knowledge of the roles of the paralogues in B. anthracis gene expression and provide a potential mechanistic basis for differences in the functions of these repressors. IMPORTANCE The protective antigen component of the anthrax toxin is essential for the delivery of the enzymatic components of the toxin into host target cells. The toxin genes and other virulence genes of B. anthracis are regulated by multiple trans-acting regulators that respond to a variety of host-related signals. PagR1, one such trans-acting regulator, connects the regulation of plasmid-encoded and chromosome-encoded virulence genes by controlling both protective antigen and surface layer protein expression. Whether PagR2, a paralog of PagR1, also functions as a trans-acting regulator was unknown. This work advances our knowledge of the complex model of virulence regulation in B. anthracis and furthers our understanding of the intriguing evolution of this pathogen.

Dynamic Profile of S-Layer Proteins Controls Surface Properties of Emetic Bacillus cereus AH187 Strain

Many prokaryotes are covered by a two-dimensional array of proteinaceous subunits. This surface layers (S-layer) is incompletely characterized for many microorganisms. Here, we studied Bacillus cereus AH187. A genome analysis identified two genes encoding the S-layer proteins SL2 and EA1, which we experimentally confirmed to encode the two protein components of the S-layer covering the surface of B. cereus. Shotgun proteomics analysis indicated that SL2 is the major component of the B. cereus S-layer at the beginning of exponential growth, whereas EA1 becomes more abundant than SL2 during later stages of stationary growth. Microscopy analysis revealed the spatial organization of SL2 and EA1 at the surface of B. cereus to depend on their temporal-dynamics during growth. Our results also show that a mutant strain lacking functional SL2 and EA1 proteins has distinct surface properties compared to its parental strain, in terms of stiffness and hydrophilicity during the stationary growth phase. Surface properties, self-aggregation capacity, and bacterial adhesion were observed to correlate. We conclude that the dynamics of SL2 and EA1 expression is a key determinant of the surface properties of B. cereus AH187, and that the S-layer could contribute to B. cereus survival in starvation conditions.

Viral Proteins Involved in the Adsorption Process of Deep-Purple, a Siphovirus Infecting Members of the Bacillus cereus Group

The infection of a bacterium by a tailed phage starts from the adsorption process, which consists of a specific and strong interaction between viral proteins called receptor binding proteins (RBPs) and receptors located on the bacterial surface. In addition to RBPs, other tail proteins, such as evolved distal tail (evoDit) proteins and tail lysins, harboring carbohydrate binding modules (CBMs) have been shown to facilitate the phage adsorption by interacting with host polysaccharides. In this work, the proteins involved in the adsorption of Deep-Purple, a siphovirus targeting bacteria of the Bacillus cereus group, were studied. Bioinformatic analysis of Deep-Purple tail protein region revealed that it contains two proteins presenting CBM domains: Gp28, an evoDit protein, and Gp29, the potential RBP. The implication of both proteins in the adsorption of Deep-Purple particles was confirmed through cell wall decoration assays. Interestingly, whereas RBP-Gp29 exhibited the same host spectrum as Deep-Purple, evoDit-Gp28 was able to bind to many B. cereus group strains, including some that are not sensitive to the phage infection. Using immunogold microscopy, both proteins were shown to be located in the phage baseplate. Additionally, an in silico analysis of the tail regions encoded by several Siphoviridae infecting the B. cereus group was performed. It revealed that although the tail organization displayed by Deep-Purple is the most prevalent, different tail arrangements are observed, suggesting that distinct baseplate organization and adsorption mechanisms are encountered in siphoviruses targeting the B. cereus group.

IMPORTANCE The B. cereus group is a complex cluster of closely related species, among which certain strains can be pathogenic (i.e., Bacillus anthracis, Bacillus cereussensu stricto, and Bacillus cytotoxicus). Nowadays, phages are receiving increasing attention for applications in controlling and detecting such pathogens. Thus, understanding the molecular mechanisms governing the phage adsorption to its bacterial host is paramount as this step is a key determinant of the phage host spectrum. Until now, the knowledge regarding the adsorption process of tailed phage targeting the B. cereus groups was mainly restricted to the phage gamma infecting B. anthracis. With this work, we provide novel insights into the adsorption of Deep-Purple, a siphovirus infecting the B. cereus group. We showed that this phage recognizes polysaccharides and relies on two different viral proteins for its successful adsorption.

Assaying Paenibacillus alvei CsaB-Catalysed Ketalpyruvyltransfer to Saccharides by Measurement of Phosphate Release

Ketalpyruvyltransferases belong to a widespread but little investigated class of enzymes, which utilise phosphoenolpyruvate (PEP) for the pyruvylation of saccharides. Pyruvylated saccharides play pivotal biological roles, ranging from protein binding to virulence. Limiting factors for the characterisation of ketalpyruvyltransferases are the availability of cognate acceptor substrates and a straightforward enzyme assay. We report on a fast ketalpyruvyltransferase assay based on the colorimetric detection of phosphate released during pyruvyltransfer from PEP onto the acceptor via complexation with Malachite Green and molybdate. To optimise the assay for the model 4,6-ketalpyruvyl::ManNAc-transferase CsaB from Paenibacillus alvei, a β-d-ManNAc-α-d-GlcNAc-diphosphoryl-11-phenoxyundecyl acceptor mimicking an intermediate of the bacterium's cell wall glycopolymer biosynthesis pathway, upon which CsaB is naturally active, was produced chemo-enzymatically and used together with recombinant CsaB. Optimal assay conditions were 5 min reaction time at 37 °C and pH 7.5, followed by colour development for 1 h at 37 °C and measurement of absorbance at 620 nm. The structure of the generated pyruvylated product was confirmed by NMR spectroscopy. Using the established assay, the first kinetic constants of a 4,6-ketalpyuvyl::ManNAc-transferase could be determined; upon variation of the acceptor and PEP concentrations, a K_{M, PEP} of 19.50 ± 3.50 µM and k_{cat, PEP} of 0.21 ± 0.01 s^-1 as well as a K_{M, Acceptor} of 258 ± 38 µM and a k_{cat, Acceptor} of 0.15 ± 0.01 s^-1 were revealed. P. alvei CsaB was inactive on synthetic pNP-β-d-ManNAc and β-d-ManNAc-β-d-GlcNAc-1-OMe, supporting the necessity of a complex acceptor substrate.

Dynamic Surface Layer Coiled Coil Proteins Processing Analog-to-Digital Information

Surface layer proteins perform multiple functions in prokaryotic cells, including cellular defense, cell-shape maintenance, and regulation of import and export of materials. However, mimicking the complex and dynamic behavior of such two-dimensional biochemical systems is challenging, and hence research has so far focused mainly on the design and manipulation of the structure and functionality of protein assemblies in solution. Motivated by the new opportunities that dynamic surface layer proteins may offer for modern technology, we herein demonstrate that immobilization of coiled coil proteins onto an inorganic surface facilitates complex behavior, manifested by reversible chemical reactions that can be rapidly monitored as digital surface readouts. Using multiple chemical triggers as inputs and several surface characteristics as outputs, we can realize reversible switching and logic gate operations that are read in parallel. Moreover, using the same coiled coil protein monolayers for derivatization of nanopores drilled into silicon nitride membranes facilitates control over ion and mass transport through the pores, thereby expanding the applicability of the dynamic coiled coil system for contemporary stochastic biosensing applications.

Bacillus anthracis chain length, a virulence determinant, is regulated by membrane localized serine/threonine protein kinase PrkC

Anthrax is a zoonotic disease caused by Bacillus anthracis, a spore-forming pathogen that displays a chaining phenotype. It has been reported that the chaining phenotype acts as a virulence factor in B. anthracis In this study, we identify a serine/threonine protein kinase of B. anthracis, PrkC, the only kinase localized at the bacteria-host interface, as a determinant of B. anthracis chain length. In vitro, prkC disruption strain (BAS ΔprkC) grew as shorter chains throughout the bacterial growth cycle. A comparative analysis between the parent strain and BAS ΔprkC indicated that the levels of proteins, BslO and Sap, associated with the regulation of the bacterial chain length, were upregulated in BAS ΔprkC BslO is a septal murein hydrolase that catalyzes daughter cell separation and Sap is an S-layer structural protein required for the septal localization of BslO. PrkC disruption also has a significant effect on bacterial growth, cell wall thickness, and septa formation. Upregulation of ftsZ in BAS ΔprkC was also observed. Altogether, our results indicate that PrkC is required for maintaining optimum growth, cell wall homeostasis and most importantly - for the maintenance of the chaining phenotype.IMPORTANCEChaining phenotype acts as a virulence factor in Bacillus anthracis This is the first study that identifies a 'signal transduction protein' with an ability to regulate the chaining phenotype in Bacillus anthracis We show that the disruption of the lone surface-localized serine/threonine protein kinase, PrkC, leads to the shortening of the bacterial chains. We report upregulation of the de-chaining proteins in the PrkC disruption strain. Apart from this, we also report for the first time that PrkC disruption results in an attenuated cell growth, a decrease in the cell wall thickness and aberrant cell septa formation during the logarithmic phase of growth - a growth phase where PrkC is expressed maximally.

S-layers: The Proteinaceous Multifunctional Armors of Gram-Positive Pathogens

S-layers are self-assembled crystalline 2D lattices enclosing the cell envelopes of several bacteria and archaea. Despite their abundance, the landscape of S-layer structure and function remains a land of wonder. By virtue of their location, bacterial S-layers have been hypothesized to add structural stability to the cell envelope. In addition, S-layers are implicated in mediating cell-environment and cell-host interactions playing a key role in adhesion, cell growth, and division. Significant strides in the understanding of these bacterial cell envelope components were made possible by recent studies that have provided structural and functional insights on the critical S-layer and S-layer-associated proteins (SLPs and SLAPs), highlighting their roles in pathogenicity and their potential as therapeutic or vaccine targets. In this mini-review, we revisit the sequence-structure-function relationships of S-layers, SLPs, and SLAPs in Gram-positive pathogens, focusing on the best-studied classes, Bacilli (Bacillus anthracis) and Clostridia (Clostridioides difficile). We delineate the domains and their architectures in archetypal S-layer proteins across Gram-positive genera and reconcile them with experimental findings. Similarly, we highlight a few key "flavors" of SLPs displayed by Gram-positive pathogens to assemble and support the bacterial S-layers. Together, these findings indicate that S-layers are excellent candidates for translational research (developing diagnostics, antibacterial therapeutics, and vaccines) since they display the three crucial characteristics: accessible location at the cell surface, abundance, and unique lineage-specific signatures.

Bacillus subtilis YngB contributes to wall teichoic acid glucosylation and glycolipid formation during anaerobic growth

UTP-glucose-1-phosphate uridylyltransferases are enzymes that produce UDP-glucose from UTP and glucose-1-phosphate. In Bacillus subtilis 168, UDP-glucose is required for the decoration of wall teichoic acid (WTA) with glucose residues and the formation of glucolipids. The B. subtilis UGPase GtaB is essential for UDP-glucose production under standard aerobic growth conditions, and gtaB mutants display severe growth and morphological defects. However, bioinformatics predictions indicate that two other UTP-glucose-1-phosphate uridylyltransferases are present in B. subtilis. Here, we investigated the function of one of them named YngB. The crystal structure of YngB revealed that the protein has the typical fold and all necessary active site features of a functional UGPase. Furthermore, UGPase activity could be demonstrated in vitro using UTP and glucose-1-phosphate as substrates. Expression of YngB from a synthetic promoter in a B. subtilis gtaB mutant resulted in the reintroduction of glucose residues on WTA and production of glycolipids, demonstrating that the enzyme can function as UGPase in vivo. When WT and mutant B. subtilis strains were grown under anaerobic conditions, YngB-dependent glycolipid production and glucose decorations on WTA could be detected, revealing that YngB is expressed from its native promoter under anaerobic condition. Based on these findings, along with the structure of the operon containing yngB and the transcription factor thought to be required for its expression, we propose that besides WTA, potentially other cell wall components might be decorated with glucose residues during oxygen-limited growth condition.

Modifications of cell wall polymers in Gram-positive bacteria by multi-component transmembrane glycosylation systems

Secondary cell wall polymers fulfil diverse and important functions within the cell wall of Gram-positive bacteria. Here, we will provide a brief overview of the principles of teichoic acid and complex secondary cell wall polysaccharide biosynthesis pathways in Firmicutes and summarize the recently revised mechanism for the decoration of teichoic acids with d-alanines. Many cell wall polymers are decorated with glycosyl groups, either intracellularly or extracellularly. The main focus of this review will be on the extracellular glycosylation mechanism and recent advances that have been made in the identification of enzymes involved in this process. Based on the proteins involved, we propose to rename the system to multi-component transmembrane glycosylation system in place of three-component glycosylation system.

Distinct Pathways Carry Out α and β Galactosylation of Secondary Cell Wall Polysaccharide in Bacillus anthracis

Bacillus anthracis, the causative agent of anthrax disease, elaborates a secondary cell wall polysaccharide (SCWP) that is required for the retention of surface layer (S-layer) and S-layer homology (SLH) domain proteins. Genetic disruption of the SCWP biosynthetic pathway impairs growth and cell division. B. anthracis SCWP is comprised of trisaccharide repeats composed of one ManNAc and two GlcNAc residues with O-3-α-Gal and O-4-β-Gal substitutions. UDP-Gal, synthesized by GalE1, is the substrate of galactosyltransferases that modify the SCWP repeat. Here, we show that the gtsE gene, which encodes a predicted glycosyltransferase with a GT-A fold, is required for O-4-β-Gal modification of trisaccharide repeats. We identify a DXD motif critical for GtsE activity. Three distinct genes, gtsA, gtsB, and gtsC, are required for O-3-α-Gal modification of trisaccharide repeats. Based on the similarity with other three-component glycosyltransferase systems, we propose that GtsA transfers Gal from cytosolic UDP-Gal to undecaprenyl phosphate (C55-P), GtsB flips the C55-P-Gal intermediate to the trans side of the membrane, and GtsC transfers Gal onto trisaccharide repeats. The deletion of galE1 does not affect growth in vitro, suggesting that galactosyl modifications are dispensable for the function of SCWP. The deletion of gtsA, gtsB, or gtsC leads to a loss of viability, yet gtsA and gtsC can be deleted in strains lacking galE1 or gtsE We propose that the loss of viability is caused by the accumulation of undecaprenol-bound precursors and present an updated model for SCWP assembly in B. anthracis to account for the galactosylation of repeat units.IMPORTANCE Peptidoglycan is a conserved extracellular macromolecule that protects bacterial cells from turgor pressure. Peptidoglycan of Gram-positive bacteria serves as a scaffold for the attachment of polymers that provide defined bacterial interactions with their environment. One such polymer, B. anthracis SCWP, is pyruvylated at its distal end to serve as a receptor for secreted proteins bearing the S-layer homology domain. Repeat units of SCWP carry three galactoses in B. anthracis Glycosylation is a recurring theme in nature and often represents a means to mask or alter conserved molecular signatures from intruders such as bacteriophages. Several glycosyltransferase families have been described based on bioinformatics prediction, but few have been studied. Here, we describe the glycosyltransferases that mediate the galactosylation of B. anthracis SCWP.

Increased Excess Intracellular Cyclic di-AMP Levels Impair Growth and Virulence of Bacillus anthracis

Cyclic di-AMP (c-di-AMP) is a recently identified bacterial second messenger that regulates biological processes. In this study, we found that inactivation of two c-di-AMP phosphodiesterases (PDEs), GdpP and PgpH, resulted in accumulation of 3.8-fold higher c-di-AMP levels than in the parental strain Sterne in Bacillus anthracis and inhibited bacterial growth. Moreover, excess c-di-AMP accumulation decreased bacterial toxin expression, increased sensitivity to osmotic stress and detergent, and attenuated virulence in both C57BL/6J and A/J mice. Complementation of the PDE mutant with a plasmid carrying gdpP or pgpH in trans from a Pspac promoter restored bacterial growth, virulence factor expression, and resistance to detergent. Our results indicate that c-di-AMP is a pleiotropic signaling molecule in B. anthracis that is important for host-pathogen interaction.IMPORTANCE Anthrax is an ancient and deadly disease caused by the spore-forming bacterial pathogen Bacillus anthracis Vegetative cells of this species produce anthrax toxin proteins and S-layer components during infection of mammalian hosts. So far, how the expression of these virulence factors is regulated remains largely unknown. Our results suggest that excess elevated c-di-AMP levels inhibit bacterial growth and reduce expression of S-layer components and anthracis toxins as well as reduce virulence in a mouse model of disease. These results indicate that c-di-AMP signaling plays crucial roles in B. anthracis biology and disease.

BA3338, a surface layer homology domain possessing protein augments immune response and protection efficacy of protective antigen against Bacillus anthracis in mouse model

AIM

Category A classified Bacillus anthracis is highly fatal pathogen that causes anthrax and creates challenges for global security and public health. In this study, development of a safe and ideal next-generation subunit anthrax vaccine has been evaluated in mouse model.

METHOD AND RESULTS

Protective antigen (PA) and BA3338, a surface layer homology (SLH) domain possessing protein were cloned, expressed in heterologous system and purified by IMAC. Recombinant PA and BA3338 with alum were administered in mouse alone or in combination. The humoral and cell-mediated immune response was measured by ELISA and vaccinated animals were challenged with B. anthracis spores via intraperitoneal route. The circulating IgG antibody titre of anti-PA and anti-BA3338 was found significantly high in the first and second booster sera. A significant enhanced level of IL-4, IFN-γ and IL-12 was observed in antigens stimulated supernatant of splenocytes of PA + BA3338 vaccinated animals. A combination of PA and BA3338 provided 80% protection against 20 LD₅₀ lethal dose of B. anthracis spores.

CONCLUSION

Both antigens induced admirable humoral and cellular immune response as well as protective efficacy against B. anthracis spores.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study has been evaluated for the first time using BA3338 as a vaccine candidate alone or in combination with well-known anthrax vaccine candidate PA. The findings of this study demonstrated that BA3338 could be a co-vaccine candidate for development of dual subunit vaccine against anthrax.

The Bacillus cereus Group: Bacillus Species with Pathogenic Potential

The Bacillus cereus group includes several Bacillus species with closely related phylogeny. The most well-studied members of the group, B. anthracis, B. cereus, and B. thuringiensis, are known for their pathogenic potential. Here, we present the historical rationale for speciation and discuss shared and unique features of these bacteria. Aspects of cell morphology and physiology, and genome sequence similarity and gene synteny support close evolutionary relationships for these three species. For many strains, distinct differences in virulence factor synthesis provide facile means for species assignment. B. anthracis is the causative agent of anthrax. Some B. cereus strains are commonly recognized as food poisoning agents, but strains can also cause localized wound and eye infections as well as systemic disease. Certain B. thuringiensis strains are entomopathogens and have been commercialized for use as biopesticides, while some strains have been reported to cause infection in immunocompromised individuals. In this article we compare and contrast B. anthracis, B. cereus, and B. thuringiensis, including ecology, cell structure and development, virulence attributes, gene regulation and genetic exchange systems, and experimental models of disease.

The Two Distinct Types of SecA2-Dependent Export Systems

In addition to SecA of the general Sec system, many Gram-positive bacteria, including mycobacteria, express SecA2, a second, transport-associated ATPase. SecA2s can be subdivided into two mechanistically distinct types: (i) SecA2s that are part of the accessory Sec (aSec) system, a specialized transporter mediating the export of a family of serine-rich repeat (SRR) glycoproteins that function as adhesins, and (ii) SecA2s that are part of multisubstrate systems, in which SecA2 interacts with components of the general Sec system, specifically the SecYEG channel, to export multiple types of substrates. Found mainly in streptococci and staphylococci, the aSec system also contains SecY2 and novel accessory Sec proteins (Asps) that are required for optimal export. Asp2 also acetylates glucosamine residues on the SRR domains of the substrate during transport. Targeting of the SRR substrate to SecA2 and the aSec translocon is mediated by a specialized signal peptide. Multisubstrate SecA2 systems are present in mycobacteria, corynebacteria, listeriae, clostridia, and some bacillus species. Although most substrates for this SecA2 have canonical signal peptides that are required for export, targeting to SecA2 appears to depend on structural features of the mature protein. The feature of the mature domains of these proteins that renders them dependent on SecA2 for export may be their potential to fold in the cytoplasm. The discovery of aSec and multisubstrate SecA2 systems expands our appreciation of the diversity of bacterial export pathways. Here we present our current understanding of the mechanisms of each of these SecA2 systems.

The cereus matter of Bacillus endophthalmitis

Bacillus cereus (B. cereus) endophthalmitis is a devastating intraocular infection primarily associated with post-traumatic injuries. The majority of these infections result in substantial vision loss, if not loss of the eye itself, within 12-48 h. Multifactorial mechanisms that lead to the innate intraocular inflammatory response during this disease include the combination of robust bacterial replication, migration of the organism throughout the eye, and toxin production by the organism. Therefore, the window of therapeutic intervention in B. cereus endophthalmitis is quite narrow compared to that of other pathogens which cause this disease. Understanding the interaction of bacterial and host factors is critical in understanding the disease and formulating more rational therapeutics for salvaging vision. In this review, we will discuss clinical and research findings related to B. cereus endophthalmitis in terms of the organism's virulence and inflammogenic potential, and strategies for improving of current therapeutic regimens for this blinding disease.

Functional characterization and evaluation of protective efficacy of EA752-862 monoclonal antibody against B. anthracis vegetative cell and spores

The most promising means of controlling anthrax, a lethal zoonotic disease during the early infection stages, entail restricting the resilient infectious form, i.e., the spores from proliferating to replicating bacilli in the host. The extractible antigen (EA1), a major S-layer protein present on the vegetative cells and spores of Bacillus anthracis, is highly immunogenic and protects mice against lethal challenge upon immunization. In the present study, mice were immunized with r-EA1C, the C terminal crystallization domain of EA1, to generate a neutralizing monoclonal antibody EA752-862, that was evaluated for its anti-spore and anti-bacterial properties. The monoclonal antibody EA752-862 had a minimum inhibitory concentration of 0.08 mg/ml, was bactericidal at a concentration of 0.1 mg/ml and resulted in 100% survival of mice against challenge with B. anthracis vegetative cells. Bacterial cell lysis as observed by scanning electron microscopy and nucleic acid leakage assay could be attributed as a possible mechanism for the bactericidal property. The association of mAb EA752-862 with spores inhibits their subsequent germination to vegetative cells in vitro, enhances phagocytosis of the spores and killing of the vegetative cells within the macrophage, and subsequently resulted in 90% survival of mice upon B. anthracis Ames spore challenge. Therefore, owing to its anti-spore and bactericidal properties, the present study demonstrates mAb EA752-862 as an efficient neutralizing antibody that hinders the establishment of early infection before massive multiplication and toxin release takes place.

Pyruvate Substitutions on Glycoconjugates

Glycoconjugates are the most diverse biomolecules of life. Mostly located at the cell surface, they translate into cell-specific "barcodes" and offer a vast repertoire of functions, including support of cellular physiology, lifestyle, and pathogenicity. Functions can be fine-tuned by non-carbohydrate modifications on the constituting monosaccharides. Among these modifications is pyruvylation, which is present either in enol or ketal form. The most commonly best-understood example of pyruvylation is enol-pyruvylation of N-acetylglucosamine, which occurs at an early stage in the biosynthesis of the bacterial cell wall component peptidoglycan. Ketal-pyruvylation, in contrast, is present in diverse classes of glycoconjugates, from bacteria to algae to yeast-but not in humans. Mild purification strategies preventing the loss of the acid-labile ketal-pyruvyl group have led to a collection of elucidated pyruvylated glycan structures. However, knowledge of involved pyruvyltransferases creating a ring structure on various monosaccharides is scarce, mainly due to the lack of knowledge of fingerprint motifs of these enzymes and the unavailability of genome sequences of the organisms undergoing pyruvylation. This review compiles the current information on the widespread but under-investigated ketal-pyruvylation of monosaccharides, starting with different classes of pyruvylated glycoconjugates and associated functions, leading to pyruvyltransferases, their specificity and sequence space, and insight into pyruvate analytics.

Extraction and Purification of Wall-Bound Polymers of Gram-Positive Bacteria

The envelope of gram-positive bacteria encompasses the cell wall, a rigid exoskeleton comprised of peptidoglycan that provides protection against lysis and governs bacterial cell shapes. Peptidoglycan also serves as the site of attachment for proteins and nonproteinaceous polymers that interact with the bacterial environment. Nonproteinaceous molecules include teichoic acids, capsular polysaccharides, and secondary cell wall polysaccharides (SCWP). Treatment of gram-positive bacterial cells with proteases, nucleases, and detergents results in the isolation of "murein sacculi" (i.e., peptidoglycan with bound carbohydrate polymers). Incubation of sacculi with acid or base releases carbohydrate polymers that can be purified for further biochemical characterization. This protocol describes the hydrofluoric acid extraction and purification of the secondary cell wall polymer of Bacillus anthracis that is also found in the envelope of the other members of the Bacillus cereus sensu lato group of bacteria.

4,6- O-Pyruvyl Ketal Modified N-Acetylmannosamine of the Secondary Cell Wall Polysaccharide of Bacillus anthracis Is the Anchoring Residue for Its Surface Layer Proteins

The secondary cell wall polysaccharide (SCWP) of Bacillus anthracis plays a key role in the organization of the cell envelope of vegetative cells and is intimately involved in host-guest interactions. Genetic studies have indicated that it anchors S-layer and S-layer-associated proteins, which are involved in multiple vital biological functions, to the cell surface of B. anthracis. Phenotypic observations indicate that specific functional groups of the terminal unit of SCWP, including 4,6- O-pyruvyl ketal and acetyl esters, are important for binding of these proteins. These observations are based on genetic manipulations and have not been corroborated by direct binding studies. To address this issue, a synthetic strategy was developed that could provide a range of pyruvylated oligosaccharides derived from B. anthracis SCWP bearing base-labile acetyl esters and free amino groups. The resulting oligosaccharides were used in binding studies with a panel of S-layer and S-layer-associated proteins, which identified structural features of SCWP important for binding. A single pyruvylated ManNAc monosaccharide exhibited strong binding to all proteins, making it a promising structure for S-layer protein manipulation. The acetyl esters and free amine of SCWP did not significantly impact binding, and this observation is contrary to a proposed model in which SCWP acetylation is a prerequisite for association of some but not all S-layer and S-layer-associated proteins.

Structural and Evolutionary Insights within the Polysaccharide Deacetylase Gene Family of Bacillus anthracis and Bacillus cereus

Functional and folding constraints impose interdependence between interacting sites along the protein chain that are envisaged through protein sequence evolution. Studying the influence of structure in phylogenetic models requires detailed and reliable structural models. Polysaccharide deacetylases (PDAs), members of the carbohydrate esterase family 4, perform mainly metal-dependent deacetylation of O- or N-acetylated polysaccharides such as peptidoglycan, chitin and acetylxylan through a conserved catalytic core termed the NodB homology domain. Genomes of Bacillus anthracis and its relative Bacillus cereus contain multiple genes of putative or known PDAs. A comparison of the functional domains of the recently determined PDAs from B. anthracis and B. cereus and multiple amino acid and nucleotide sequence alignments and phylogenetic analysis performed on these closely related species showed that there were distinct differences in binding site formation, despite the high conservation on the protein sequence, the folding level and the active site assembly. This may indicate that, subject to biochemical verification, the binding site-forming sequence fragments are under functionally driven evolutionary pressure to accommodate and recognize distinct polysaccharide residues according to cell location, use, or environment. Finally, we discuss the suggestion of the paralogous nature of at least two genes of B. anthracis, ba0330 and ba0331, via specific differences in gene sequence, protein structure, selection pressure and available localization patterns. This study may contribute to understanding the mechanisms under which sequences evolve in their structures and how evolutionary processes enable structural variations.

Functional Characterization of Enzymatic Steps Involved in Pyruvylation of Bacterial Secondary Cell Wall Polymer Fragments

Various mechanisms of protein cell surface display have evolved during bacterial evolution. Several Gram-positive bacteria employ S-layer homology (SLH) domain-mediated sorting of cell-surface proteins and concomitantly engage a pyruvylated secondary cell-wall polymer as a cell-wall ligand. Specifically, pyruvate ketal linked to β-D-ManNAc is regarded as an indispensable epitope in this cell-surface display mechanism. That secondary cell wall polymer (SCWP) pyruvylation and SLH domain-containing proteins are functionally coupled is supported by the presence of an ortholog of the predicted pyruvyltransferase CsaB in bacterial genomes, such as those of Bacillus anthracis and Paenibacillus alvei. The P. alvei SCWP, consisting of pyruvylated disaccharide repeats [→4)-β-D-GlcNAc-(1→3)-4,6-Pyr-β-D-ManNAc-(1→] serves as a model to investigate the widely unexplored pyruvylation reaction. Here, we reconstituted the underlying enzymatic pathway in vitro in combination with synthesized compounds, used mass spectrometry, and nuclear magnetic resonance spectroscopy for product characterization, and found that CsaB-catalyzed pyruvylation of β-D-ManNAc occurs at the stage of the lipid-linked repeat. We produced the P. alvei TagA (PAV_RS07420) and CsaB (PAV_RS07425) enzymes as recombinant, tagged proteins, and using a synthetic 11-phenoxyundecyl-diphosphoryl-α-GlcNAc acceptor, we uncovered that TagA is an inverting UDP-α-D-ManNAc:GlcNAc-lipid carrier transferase, and that CsaB is a pyruvyltransferase, with synthetic UDP-α-D-ManNAc and phosphoenolpyruvate serving as donor substrates. Next, to substitute for the UDP-α-D-ManNAc substrate, the recombinant UDP-GlcNAc-2-epimerase MnaA (PAV_RS07610) of P. alvei was included in this in vitro reconstitution system. When all three enzymes, their substrates and the lipid-linked GlcNAc primer were combined in a one-pot reaction, a lipid-linked SCWP repeat precursor analog was obtained. This work highlights the biochemical basis of SCWP biosynthesis and bacterial pyruvyl transfer.

Molecular Basis for the Attachment of S-Layer Proteins to the Cell Wall of Bacillus anthracis

Bacterial surface (S) layers are paracrystalline arrays of protein assembled on the bacterial cell wall that serve as protective barriers and scaffolds for housekeeping enzymes and virulence factors. The attachment of S-layer proteins to the cell walls of the Bacillus cereus sensu lato, which includes the pathogen Bacillus anthracis, occurs through noncovalent interactions between their S-layer homology domains and secondary cell wall polysaccharides. To promote these interactions, it is presumed that the terminal N-acetylmannosamine (ManNAc) residues of the secondary cell wall polysaccharides must be ketal-pyruvylated. For a few specific S-layer proteins, the O-acetylation of the penultimate N-acetylglucosamine (GlcNAc) is also required. Herein, we present the X-ray crystal structure of the SLH domain of the major surface array protein Sap from B. anthracis in complex with 4,6- O-ketal-pyruvyl-β-ManNAc-(1,4)-β-GlcNAc-(1,6)-α-GlcN. This structure reveals for the first time that the conserved terminal SCWP unit is the direct ligand for the SLH domain. Furthermore, we identify key binding interactions that account for the requirement of 4,6- O-ketal-pyruvyl-ManNAc while revealing the insignificance of the O-acetylation on the GlcNAc residue for recognition by Sap.

Galactosylation of the Secondary Cell Wall Polysaccharide of Bacillus anthracis and Its Contribution to Anthrax Pathogenesis

Bacillus anthracis, the causative agent of anthrax disease, elaborates a secondary cell wall polysaccharide (SCWP) that is essential for bacterial growth and cell division. B. anthracis SCWP is comprised of trisaccharide repeats with the structure, [→4)-β-ManNAc-(1→4)-β-GlcNAc(O3-α-Gal)-(1→6)-α-GlcNAc(O3-α-Gal, O4-β-Gal)-(1→]6-12 The genes whose products promote the galactosylation of B. anthracis SCWP are not yet known. We show here that the expression of galE1, encoding a UDP-glucose 4-epimerase necessary for the synthesis of UDP-galactose, is required for B. anthracis SCWP galactosylation. The galE1 mutant assembles surface (S) layer and S layer-associated proteins that associate with ketal-pyruvylated SCWP via their S layer homology domains similarly to wild-type B. anthracis, but the mutant displays a defect in γ-phage murein hydrolase binding to SCWP. Furthermore, deletion of galE1 diminishes the capsulation of B. anthracis with poly-d-γ-glutamic acid (PDGA) and causes a reduction in bacterial virulence. These data suggest that SCWP galactosylation is required for the physiologic assembly of the B. anthracis cell wall envelope and for the pathogenesis of anthrax disease.IMPORTANCE Unlike virulent Bacillus anthracis isolates, B. anthracis strain CDC684 synthesizes secondary cell wall polysaccharide (SCWP) trisaccharide repeats without galactosyl modification, exhibits diminished growth in vitro in broth cultures, and is severely attenuated in an animal model of anthrax. To examine whether SCWP galactosylation is a requirement for anthrax disease, we generated variants of B. anthracis strains Sterne 34F2 and Ames lacking UDP-glucose 4-epimerase by mutating the genes galE1 and galE2 We identified galE1 as necessary for SCWP galactosylation. Deletion of galE1 decreased the poly-d-γ-glutamic acid (PDGA) capsulation of the vegetative form of B. anthracis and increased the bacterial inoculum required to produce lethal disease in mice, indicating that SCWP galactosylation is indeed a determinant of anthrax disease.

Characterization of Surface-Active Biofilm Protein BslA in Self-Assembling Langmuir Monolayer at the Air-Water Interface

Biofilm is an extracellular matrix of bacteria and serves as a protective shield of bacterial communities. It is crucial for microbial growth and one of the leading causes of human chronic infections as well. However, the structures and molecular mechanism of biofilm formation remain largely unknown. Here, we examined a protein, BslA, expressed in the biofilms of Bacillus subtilis. We characterized the Langmuir monolayers of BslA at the air/water interface. Using techniques in surface chemistry and spectroscopy, we found that BslA forms a stable and robust Langmuir monolayer at the air/water interface. Our results show that the BslA Langmuir monolayer underwent two-stage elasticity in the solid state phase upon mechanical compression: one is possibly due to the intermolecular interaction and the other is likely due to both the intermolecular compulsion and the intramolecular distortion. The Langmuir monolayer of BslA shows abrupt changes in rigidities and elasticities at ∼25 mN/m. This surface pressure is close to the one at which BlsA saturates the air/water interface as a self-assembled film without mechanical compression, corresponding to a mean molecular area of ∼700 Ų per molecule. Based on the results of surface UV-visible spectroscopy and infrared reflective-absorption spectroscopy, we propose that the BslA Langmuir monolayer carries intermolecular elasticity before ∼25 mN/m and both intermolecular and intramolecular elasticity after ∼25 mN/m. These results provide valuable insights into the understanding of biofilm-associated protein under high mechanical force, shedding light on further investigation of biofilm structure and functionalities.