Electromicrobiology

Plasticizers inhibit food waste anaerobic digestion performance by affecting microbial succession and metabolism

The widely existed plastic additives plasticizers in organic wastes possibly pose negative influences on anaerobic digestion (AD) performance, the direct evidence about the effects of plasticizers on AD performance is still lacking. This study evaluated the influencing mechanism of two typical plasticizers bisphenol A (BPA) and dioctyl phthalate on the whole AD process. Results indicated that plasticizers addition inhibited methane production, and the inhibiting effects were reinforced with the increase of concentration. By contrast, 50 mg/L BPA exhibited the strongest inhibition on methane production. Physicochemical analysis showed plasticizers inhibited the metabolism efficiency of soluble polysaccharide and volatile fatty acids. Microbial communities analyses suggested that plasticizers inhibited the direct interspecies electron transfer participators of methanogenic archaea (especially Methanosarcina) and syntrophic bacteria. Furthermore, plasticizers inhibited the methane metabolisms, key coenzymes (CoB, CoM, CoF420 and methanofuran) biosynthesis and the metabolisms of major organic matters. This study shed light on the effects of plasticizers on AD performance and provided new insights for assessing the influences of plasticizers or plastic additives on the disposal of organic wastes.

Unlocking Wearable Microbial Fuel Cells for Advanced Wound Infection Treatment

Better infection control will accelerate wound healing and alleviate associated healthcare burdens. Traditional antibacterial dressings often inadequately control infections, inadvertently promoting antibacterial resistance. Our research unveils a novel, dual-functional living dressing that autonomously generates antibacterial agents and delivers electrical stimulation, harnessing the power of spore-forming Bacillus subtilis. This dressing is built on an innovative wearable microbial fuel cell (MFC) framework, using B. subtilis endospores as a powerful, dormant biocatalyst. The endospores are resilient, reactivating in nutrient-rich wound exudate to produce electricity and antibacterial compounds. The combination allows B. subtilis to outcompete pathogens for food and other resources, thus fighting infections. The strategy is enhanced by the extracellular synthesis of tin oxide and copper oxide nanoparticles on the endospore surface, boosting antibacterial action, and electrical stimulation. Moreover, the MFC framework introduces a pioneering dressing design featuring a conductive hydrogel embedded within a paper-based substrate. The arrangement ensures cell stability and sustains a healing-friendly moist environment. Our approach has proven very effective against three key pathogens in biofilms: Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus aureus demonstrating exceptional capabilities in both in vitro and ex vivo models. Our innovation marks a significant leap forward in wearable MFC-based wound care, offering a potent solution for treating infected wounds.

Unveiling the unique role of iron in the metabolism of methanogens: A review

Methanogens are the main participants in the carbon cycle, catalyzing five methanogenic pathways. Methanogens utilize different iron-containing functional enzymes in different methanogenic processes. Iron is a vital element in methanogens, which can serve as a carrier or reactant in electron transfer. Therefore, iron plays an important role in the growth and metabolism of methanogens. In this paper, we cast light on the types and functions of iron-containing functional enzymes involved in different methanogenic pathways, and the roles iron play in energy/substance metabolism of methanogenesis. Furthermore, this review provides certain guiding significance for lowering CH4 emissions, boosting the carbon sink capacity of ecosystems and promoting green and low-carbon development in the future.

Critical evaluation of electroactive wetlands: traditional and modern advances

In the field of sustainable wastewater management, electroactive wetlands (EW), or constructed wetland-microbial fuel cells (CW-MFC), are an emerging technology. With the growing problem of untreated wastewater, the emphasis must shift to decentralisation of wastewater treatment infrastructure, and CW-MFC can be an excellent choice. This review provides a chronologically organized account of the design and configuration of CW-MFCs developed between 2010 and 2023. The research on CW-MFC has mainly focused on material, positioning and number of electrodes; use of electroconductive media and filler materials; flow regime; algal-based CW-MFC and multistage setups. Compared to traditional constructed wetlands (CW) and microbial fuel cells (MFC), CW-MFCs have a number of advantages, including better treatment efficiency, faster organic matter utilisation, lower capital and land requirements and a smaller carbon footprint. However, there are some limitations as well, such as upscaling and viable electricity generation, which are covered in more detail in the article. Moreover, the economics of this technology is also evaluated. The microbiology of a CW-MFC and its influence on its performance are also elaborated. Recent advancements in this field in terms of design, configuration and performance are discussed. Finally, the knowledge gaps that must be addressed before this technique can be successfully implemented on a large scale are highlighted, along with specific recommendations. This article aims to advocate for EWs as an ideal decentralised wastewater treatment technique, while also shedding light on the areas that still need to be worked on.

Advances and challenges in biocathode microbial electrolysis cells for chlorinated organic compounds degradation from electroactive perspectives

Microbial electrolysis cell (MEC) is a promising in-situ strategy for chlorinated organic compound (COC) pollution remediation due to its high efficiency, low energy input, and long-term potential. Reductive dechlorination as the most critical step in COC degradation which takes place primarily in the cathode chamber of MECs is a complex biochemical process driven by the behavior of electrons. However, no information is currently available on the internal mechanism of MEC in dechlorination from the perspective of the whole electron transfer procedure and its dependent electrode materials. This review addresses the underlying mechanism of MEC on the fundamental of the generation (electron donor), transmission (transfer pathway), utilization (functional microbiota) and reception (electron acceptor) of electrons in dechlorination. In addition, the vital role of varied cathode materials involved in the entire electron transfer procedure during COC dechlorination is emphasized. Subsequently, suggestions for future research, including model construction, cathode material modification, and expanding the applicability of MECs to removal gaseous COCs have been proposed. This paper enriches the mechanism of COC degradation by MEC, and thus provides the theoretical support for the scale-up bioreactors for efficient COC removal.

Roots Fuel Cell Produces and Stores Clean Energy

In recent years, extensive scientific efforts have been conducted to develop clean bioenergy technologies. A promising approach that has been under development for more than a hundred years is the microbial fuel cell (MFC) which utilizes exoelectrogenic bacteria as an electron source in a bioelectrochemical cell. The viability of bacteria in soil MFCs can be maintained by integrating plant roots, which release organic materials that feed the bacteria. In this work, we show that rather than organic compounds, roots also release redox species that can produce electricity in a biofuel cell. We first studied the reduction of the electron acceptor Cytochrome C by green onion roots. We integrate green onion roots into a biofuel cell to produce a continuous bias-free electric current for more than 24 h in the dark. This current is enhanced upon irradiation of the onion's leaves with light. We apply cyclic voltammetry and 2D-fluorescence measurements to show that NADH and NADPH act as major electron mediators between the roots and the anode, while their concentrations in the external root matrix are increased upon irradiation of the leaves. Finally, we show that roots can contribute to energy storage by charging a supercapacitor.

Electron Transfer Beyond the Outer Membrane: Putting Electrons to Rest

Extracellular electron transfer (EET) is the physiological process that enables the reduction or oxidation of molecules and minerals beyond the surface of a microbial cell. The first bacteria characterized with this capability were Shewanella and Geobacter, both reported to couple their growth to the reduction of iron or manganese oxide minerals located extracellularly. A key difference between EET and nearly every other respiratory activity on Earth is the need to transfer electrons beyond the cell membrane. The past decade has resolved how well-conserved strategies conduct electrons from the inner membrane to the outer surface. However, recent data suggest a much wider and less well understood collection of mechanisms enabling electron transfer to distant acceptors. This review reflects the current state of knowledge from Shewanella and Geobacter, specifically focusing on transfer across the outer membrane and beyond-an activity that enables reduction of highly variable minerals, electrodes, and even other organisms.

Nanoelectrochemistry at liquid/liquid interfaces for analytical, biological, and material applications

Herein, we feature our recent efforts toward the development and application of nanoelectrochemistry at liquid/liquid interfaces, which are also known as interfaces between two immiscible electrolyte solutions (ITIES). Nanopipets, nanopores, and nanoemulsions are developed to create the nanoscale ITIES for the quantitative electrochemical measurement of ion transfer, electron transfer, and molecular transport across the interface. The nanoscale ITIES serves as an electrochemical nanosensor to enable the selective detection of various ions and molecules as well as high-resolution chemical imaging based on scanning electrochemical microscopy. The powerful nanoelectroanalytical methods will be useful for biological and material applications as illustrated by in situ studies of solid-state nanopores, nuclear pore complexes, living bacteria, and advanced nanoemulsions. These studies provide unprecedented insights into the chemical reactivity of important biological and material systems even at the single nanostructure level.

Proterozoic Acquisition of Archaeal Genes for Extracellular Electron Transfer: A Metabolic Adaptation of Aerobic Ammonia-Oxidizing Bacteria to Oxygen Limitation

Many aerobic microbes can utilize alternative electron acceptors under oxygen-limited conditions. In some cases, this is mediated by extracellular electron transfer (or EET), wherein electrons are transferred to extracellular oxidants such as iron oxide and manganese oxide minerals. Here, we show that an ammonia-oxidizer previously known to be strictly aerobic, Nitrosomonas communis, may have been able to utilize a poised electrode to maintain metabolic activity in anoxic conditions. The presence and activity of multiheme cytochromes in N. communis further suggest a capacity for EET. Molecular clock analysis shows that the ancestors of β-proteobacterial ammonia oxidizers appeared after Earth's atmospheric oxygenation when the oxygen levels were >10-4pO2 (present atmospheric level [PAL]), consistent with aerobic origins. Equally important, phylogenetic reconciliations of gene and species trees show that the multiheme c-type EET proteins in Nitrosomonas and Nitrosospira lineages were likely acquired by gene transfer from γ-proteobacteria when the oxygen levels were between 0.1 and 1 pO2 (PAL). These results suggest that β-proteobacterial EET evolved during the Proterozoic when oxygen limitation was widespread, but oxidized minerals were abundant.

Mammalian Fuel Cells Produce Electric Current

The increasing concern about climate change has led scientists around the world to develop clean energy technologies that may replace the traditional use of fossil fuels. A promising approach is the utilization of unicellular organisms as electron donors in bio-fuel cells. To date, this method has been limited to microorganisms such as bacteria, yeast, and microalgae. In this work, we show for the first time the concept of using mammalian cell cultures and organoids as electron donors in biofuel cells. We apply cyclic voltammetry to show that upon association of ARPE19 cells with the anode, they release reducing molecules to produce electricity. Furthermore, we apply 2D-fluorescence measurements and show that upon illumination, photosensitive stem cell-derived retinal organoids, which consist of rod photoreceptors and interneurons, secrete NADH and NADPH molecules that can donate electrons at the anode to produce photocurrent.

In Vivo Voltammetric Imaging of Metal Nanoparticle-Catalyzed Single-Cell Electron Transfer by Fermi Level-Responsive Graphene

Metal nanomaterials can facilitate microbial extracellular electron transfer (EET) in the electrochemically active biofilm. However, the role of nanomaterials/bacteria interaction in this process is still unclear. Here, we reported the single-cell voltammetric imaging of Shewanella oneidensis MR-1 at the single-cell level to elucidate the metal-enhanced EET mechanism in vivo by the Fermi level-responsive graphene electrode. Quantified oxidation currents of ~20 fA were observed from single native cells and gold nanoparticle (AuNP)-coated cells in linear sweep voltammetry analysis. On the contrary, the oxidation potential was reduced by up to 100 mV after AuNP modification. It revealed the mechanism of AuNP-catalyzed direct EET decreasing the oxidation barrier between the outer membrane cytochromes and the electrode. Our method offered a promising strategy to understand the nanomaterials/bacteria interaction and guide the rational construction of EET-related microbial fuel cells.

All-electrical antibiotic susceptibility and resistance profiling of electrogenic Pseudomonas aeruginosa

There is a pressing need for evidence-based, non-surgical therapy guidance for biofilm-based infections. Conventional phenotypic or genotypic or emerging antibiotic susceptibility testing (AST) techniques cannot provide clinically relevant guidelines and widely adaptable stewardship for effective biofilm treatment because they are mainly limited to planktonic bacteria and suffer from many technical and operational challenges. Here, we created an all-electrical, reliable, rapid AST device to monitor antibiotic efficacy in bacterial biofilms that can be practically translatable to clinical settings and industrial antibiotic developments. The electrons metabolically produced by a Pseudomonas aeruginosa biofilm provided a strong signal for monitoring bacterial growth and treatment efficacy while a 3-D paper-based culturing platform provided a new strategy for rapid biofilm formation through capillary action. When antibiotics are effective against the pathogenic biofilm, their metabolic activities are inhibited, decreasing their electron transfer reactions. The changes in electrical outputs can be measured to assess the treatment effectiveness against pathogenic biofilms. Within 100 minutes, our six-well AST device successfully distinguished antibiotic-susceptible and -resistant P. aeruginosa biofilms, provided a quantifiable minimum inhibitory concentration (MIC) of antibiotics, and characterized the bacterial antibiotic action mechanisms.

Electroactive Bacteria in Natural Ecosystems and Their Applications in Microbial Fuel Cells for Bioremediation: A Review

Electroactive bacteria (EAB) are natural microorganisms (mainly Bacteria and Archaea) living in various habitats (e.g., water, soil, sediment), including extreme ones, which can interact electrically each other and/or with their extracellular environments. There has been an increased interest in recent years in EAB because they can generate an electrical current in microbial fuel cells (MFCs). MFCs rely on microorganisms able to oxidize organic matter and transfer electrons to an anode. The latter electrons flow, through an external circuit, to a cathode where they react with protons and oxygen. Any source of biodegradable organic matter can be used by EAB for power generation. The plasticity of electroactive bacteria in exploiting different carbon sources makes MFCs a green technology for renewable bioelectricity generation from wastewater rich in organic carbon. This paper reports the most recent applications of this promising technology for water, wastewater, soil, and sediment recovery. The performance of MFCs in terms of electrical measurements (e.g., electric power), the extracellular electron transfer mechanisms by EAB, and MFC studies aimed at heavy metal and organic contaminant bioremediationF are all described and discussed.

Reason for the increased electroactivity of extracellular polymeric substances with electrical stimulation: Structural change of α-helix peptide of protein

Electroactivity is an important parameter to assess the ability of the extracellular polymeric substance (EPS) of microorganisms to participate in extracellular respiration. Many reports have found that the electroactivity of microbial sludge could be enhanced with electrical stimulation, but the reason remains unclear. The results of this study showed that the current generation of the three microbial electrolysis cells increased by 1.27-1.76 times during 49 days of electrical stimulation, but the typical electroactive microorganisms were not enriched. Meanwhile, the capacitance and conductivity of EPS of sludge after the electrical stimulation increased by 1.32-1.83 times and 1.27-1.32 times, respectively. In-situ FTIR analysis indicated that the electrical stimulation could lead to the polarization of amide groups in the protein, likely affecting the protein structure related to the electroactivity. Accordingly, the dipole moment of the α-helix peptide of protein of sludge increased from 220 D to 280 D after the electrical stimulation, which was conducive to electron transfer in the α-helix peptide. Moreover, the vertical ionization potential and E_LUMO-E_HOMO energy gap of the C-terminal in the α-helix peptide decreased from 4.43 eV to 4.10 eV and 0.41 eV to 0.24 eV, respectively, which indicated that the α-helix was easier to serve as the electron transfer site of electron hopping. These results meant that the enhancement of the dipole moment of the α-helix peptide unchoked the electron transfer chain of the protein, which was the main reason for the increased electroactivity of EPS protein.

Microbial nanowires: type IV pili or cytochrome filaments?

A dynamic field of study has emerged involving long-range electron transport by extracellular filaments in anaerobic bacteria, with Geobacter sulfurreducens being used as a model system. The interest in this topic stems from the potential uses of such systems in bioremediation, energy generation, and new bio-based nanotechnology for electronic devices. These conductive extracellular filaments were originally thought, based upon low-resolution observations of dried samples, to be type IV pili (T4P). However, the recently published atomic structure for the T4P from G. sulfurreducens, obtained by cryo-electron microscopy (cryo-EM), is incompatible with the numerous models that have been put forward for electron conduction. As with all high-resolution structures of T4P, the G. sulfurreducens T4P structure shows a partial melting of the α-helix that substantially impacts the aromatic residue positions such that they are incompatible with conductivity. Furthermore, new work using high-resolution cryo-EM shows that conductive filaments thought to be T4P are actually polymerized cytochromes, with stacked heme groups forming a continuous conductive wire, or extracellular DNA. Recent atomic structures of three different cytochrome filaments from G. sulfurreducens suggest that such polymers evolved independently on multiple occasions. The expectation is that such polymerized cytochromes may be found emanating from other anaerobic organisms.

Nanoscale Carbonate Ion-Selective Amperometric/Voltammetric Probes Based on Ion-Ionophore Recognition at the Organic/Water Interface: Hidden Pieces of the Puzzle in the Nanoscale Phase

Here, we report on the successful demonstration and application of carbonate (CO₃^2-) ion-selective amperometric/voltammetric nanoprobes based on facilitated ion transfer (IT) at the nanoscale interface between two immiscible electrolyte solutions. This electrochemical study reveals critical factors to govern CO₃^2--selective nanoprobes using broadly available Simon-type ionophores forming a covalent bond with CO₃^2-, i.e., slow dissolution of lipophilic ionophores in the organic phase, activation of hydrated ionophores, peculiar solubility of a hydrated ion-ionophore complex near the interface, and cleanness at the nanoscale interface. These factors are experimentally confirmed by nanopipet voltammetry, where a facilitated CO₃^2- IT is studied with a nanopipet filled with an organic phase containing the trifluoroacetophenone derivative CO₃^2-ionophore (CO₃^2-ionophore VII) by voltammetrically and amperometrically sensing CO₃^2- in water. Theoretical assessments of reproducible voltammetric data confirm that the dynamics of CO₃^2- ionophore VII-facilitated ITs (FITs) follows the one-step electrochemical (E) mechanism controlled by both water-finger formation/dissociation and ion-ionophore complexation/dissociation during interfacial ITs. The yielded rate constant, k⁰ = 0.048 cm/s, is very similar to the reported values of other FIT reactions using ionophores forming non-covalent bonds with ions, implying that a weak binding between CO₃^2- ion-ionophore enables us to observe FITs by fast nanopipet voltammetry regardless of the nature of bondings between the ion and ionophore. The analytical utility of CO₃^2--selective amperometric nanoprobes is further demonstrated by measuring the CO₃^2- concentration produced by metal-reducing bacteria Shewanella oneidensis MR-1 as a result of organic fuel oxidation in bacterial growth media in the presence of various interferents such as H₂PO₄^-, Cl^-, and SO₄^2-.

Conductive Materials on Biocathodes Altered the Electron-Transfer Paths and Modulated γ-HCH Dechlorination and CH4 Production in Microbial Electrochemical Systems

Adding conductive materials to the cathode of a microbial electrochemical system (MES) can alter the route of interspecies electron transfer and the kinetics of reduction reactions. We tested reductive dechlorination of γ-hexachlorocyclohexane (γ-HCH), along with CH₄ production, in MES systems whose cathodes were coated with conductive magnetite nanoparticles (NaFe), biochar (BC), magnetic biochar (FeBC), or anti-conductive silica biochar (SiBC). Coating with NaFe enriched electroactive microorganisms, boosted electro-bioreduction, and accelerated γ-HCH dechlorination and CH₄ production. In contrast, BC only accelerated dechlorination, while FeBC only accelerated methanogenesis, because of their assemblies of functional taxa that selectively transferred electrons to those electron sinks. SiBC, which decreased electro-bioreduction, yielded the highest CH₄ production and increased methanogens and the mcrA gene. This study provides a strategy to selectively control the distribution of electrons between reductive dechlorination and methanogenesis by adding conductive or anti-conductive materials to the MES's cathode. If the goal is to maximize dechlorination and minimize methane generation, then BC is the optimal conductive material. If the goal is to accelerate electro-bioreduction, then the best addition is NaFe. If the goal is to increase the rate of methanogenesis, adding anti-conductive SiBC is the best.

Photocurrent Production from Cherries in a Bio-Electrochemical Cell

In recent years, clean energy technologies that meet ever-increasing energy demands without the risk of environmental contamination has been a major interest. One approach is the utilization of plant leaves, which release redox-active NADPH as a result of photosynthesis, to generate photocurrent. In this work, we show for the first time that photocurrent can be harvested directly from the fruit of a cherry tree when associated with a bio-electrochemical cell. Furthermore, we apply electrochemical and spectroscopic methods to show that NADH in the fruit plays a major role in electric current production.

Electro-polarization of protein-like substances accelerates trans-cell-wall electron transfer in microbial extracellular respiration

Electrical stimulation has been used to strengthen microbial extracellular electron transfer (EET), however, the deep-seated reasons remain unclear. Here we reported that Bacillus subtilis, a typical gram-positive bacterium capable of extracellular respiration, obtained a higher EET capacity after the electrical domestication. After the electrical domestication, the current generated by the EET of B. subtilis was 23.4-fold that of the control group without pre-domestication. Multiple lines of evidence in bacterial cells of B. subtilis, their cell walls, and a model tripeptide indicated that the polarization of amide groups after the electrical stimulation forwarded the H-bonds recombination and radical generation of protein-like substances to develop extracellular electron transfer via the proton-coupled pattern. The improved electrochemical properties of protein-like substances benefited the trans-cell-wall electron transfer and strengthen extracellular respiration. This study was the first exploration to promote microbial extracellular respiration by improving the electrochemical properties of protein-like substances in cell envelopes.

Non-photosynthetic bacteria produce photocurrent mediated by NADH

In recent years, the concern from the global climate change has driven an urgent need to develop clean energy technologies that do not involve combustion process that emit carbon into the atmosphere. A promising concept is microbial fuel cells that utilize bacteria as electron donors in a bio-electrochemical cell performing a direct electron transfer via conductive protein complexes or by secretion of redox active metabolites such as quinone or phenazine derivatives. In the case of photosynthetic bacteria (cyanobacteria) electrons can also be extracted from the photosynthetic pathway mediated mostly by NADH and NADPH. In this work, we show for the first time that the intact non-photosynthetic bacteria Escherichia coli can produce photocurrent that is enhanced upon addition of an exogenous electron mediator. Furthermore, we apply 2D-fluorescence measurement to show that NADH is released from the bacterial cells, which may apply as a native electron mediator in microbial fuel cells.

Metabolic turnover of cysteine-related thiol compounds at environmentally relevant concentrations by Geobacter sulfurreducens

Low-molecular-mass (LMM) thiol compounds are known to be important for many biological processes in various organisms but LMM thiols are understudied in anaerobic bacteria. In this work, we examined the production and turnover of nanomolar concentrations of LMM thiols with a chemical structure related to cysteine by the model iron-reducing bacterium Geobacter sulfurreducens. Our results show that G. sulfurreducens tightly controls the production, excretion and intracellular concentration of thiols depending on cellular growth state and external conditions. The production and cellular export of endogenous cysteine was coupled to the extracellular supply of Fe(II), suggesting that cysteine excretion may play a role in cellular trafficking to iron proteins. Addition of excess exogenous cysteine resulted in a rapid and extensive conversion of cysteine to penicillamine by the cells. Experiments with added isotopically labeled cysteine confirmed that penicillamine was formed by a dimethylation of the C-3 atom of cysteine and not via indirect metabolic responses to cysteine exposure. This is the first report of de novo metabolic synthesis of this compound. Penicillamine formation increased with external exposure to cysteine but the compound did not accumulate intracellularly, which may suggest that it is part of G. sulfurreducens' metabolic strategy to maintain cysteine homeostasis. Our findings highlight and expand on processes mediating homeostasis of cysteine-like LMM thiols in strict anaerobic bacteria. The formation of penicillamine is particularly noteworthy and this compound warrants more attention in microbial metabolism studies.

Response of Microbial Communities on Cathode with Different Potentials in a Single-Chamber Reactor

Microbes use both organic and inorganic compounds as electron donors, with different electronic potentials, to produce energy required for growth in environments. Conventional studies on the effects of different electron donors on microbial community has been extensively studied with a set cathode potential. However, it remains under-researched how a microbial community response to the different redox potentials in different environments. Here, we incubated a lake sediment in a single-chamber reactor equipped with three working electrodes, i.e., with potentials of - 0.29 V, - 0.05 V versus standard hydrogen electrode and open-circuit, respectively. Results reveal that the structure of bacterial communities was highly similar for all closed-circuit electrodes (- 0.29 V, - 0.05 V), while differing significantly from those on open-circuit electrodes. We also show that specific bacteria were preferentially enriched by different electrode potentials, i.e., Pseudomonas and Rhodobacter preferentially grew on - 0.05 V and - 0.29 V cathode potentials, Azospirillum and Bosea preferentially grew on - 0.05 V; while Ferrovibrio, Hydrogenophaga, Delftia, and Sphingobium preferentially grew on - 0.29 V. In addition, microorganisms selectively enriched on open-circuit electrodes possess higher connectivity and closer relationship than microorganisms selectively enriched on closed-circuit electrode.

In situ electrosynthetic bacterial growth using electricity generated by a deep-sea hydrothermal vent

Electroautotrophic microorganisms have attracted great attention since they exhibit a new type of primary production. Here, in situ electrochemical cultivation was conducted using the naturally occurring electromotive forces at a deep-sea hydrothermal vent. The voltage and current generation originating from the resulting microbial activity was observed for 12 days of deployment, with fluctuation in response to tidal cycles. A novel bacterium belonging to the genus Thiomicrorhabdus dominated the microbial community specifically enriched on the cathode. Metagenomic analysis provided the draft genome of the bacterium and the gene repertoire indicated that the bacterium has the potential for thio-autotrophic growth, which is a typical physiological feature of the members of the genus, while the bacterium had a unique gene cluster encoding multi-heme cytochrome c proteins responsible for extracellular electron transfer. Herein, we propose this bacterium as a new species, specifically enriched during electricity generation, as 'Candidatus Thiomicrorhabdus electrophagus'. This finding suggests the natural occurrence of electrosynthetic microbial populations using the geoelectricity in deep-sea hydrothermal environments.

Surface characterisation reveals substrate suitability for cyanobacterial phototaxis

Cyanobacteria respond to light stimulation, activating localised assembly of type IV pili for motility. The resulting phototactic response is highly dependent on the nature of the incoming light stimulus, and the final motility parameters depend on the surface properties. Conventionally, phototaxis studies are carried out on hydrogel surfaces, such as agarose, with surface properties that vary in time due to experimental conditions. This study considers five substrates, widely utilized in microfluidic technology, to identify the most suitable alternative for performing reliable and repeatable phototaxis assays. The surfaces are characterised via a contact angle goniometer to determine the surface energy, white light interferometry for roughness, zeta-potentials and AFM force distance curves for charge patterns, and XPS for surface composition. Cell motility assays showed 1.25 times increment on surfaces with a water contact angle of 80° compared to a reference glass surface. To prove that motility can be enhanced, polydimethylsiloxane (PDMS) surfaces were plasma treated to alter their surface wettability. The motility on the plasma-treated PDMS showed similar performance as for glass surfaces. In contrast, untreated PDMS surfaces displayed close to zero motility. We also describe the force interactions of cells with the test surfaces using DLVO (Derjaguin-Landau-Verwey-Overbeek) and XDLVO (extended DLVO) theories. The computed DLVO/XDLVO force-distance curves are compared with those obtained using atomic force microscopy. Our findings show that twitching motility on tested surfaces can be described mainly from adhesive forces and hydrophobicity/hydrophilicity surface properties. STATEMENT OF SIGNIFICANCE: The current article focuses on unravelling the potential Micro-Electro-Mechanical System (MEMS) compatible surfaces for studying phototactic twitching motility of cyanobacteria. This is the first exhaustive surface characterization study coupled with phototaxis experiments, to understand the forces contributing to twitching motility. The methods shown in this paper can be further extended to study other surfaces and also to other bacteria exhibiting twitching motility.

Effects of UV stress on Shewanella azerbaijanica bioremediation response

Shewanella azerbaijanica roles as a live electrode, passing electrons from electron donors to electron acceptors, to gain energy from the extracellular electron transfer (EET) pathway. The present study, considered the quantitative expressions of the major EET reductase genes (mtr cluster), together with uranium removal, live-cell counting, and spectrophotometry in UV-C treated bacteria (0, 60, 120 and 180 s). The simultaneous decline in the uranium removal and cell counting, along with major mtr gene expression patterns (mtrABDEF), approved the negative effects of UV-C radiation on uranium bioreduction in S. azerbaijanica. Uranium removal and cell counting decreased to 25.49% and 0.45 × 109 cells/mL in the 180s UV-C treated sample, respectively at 2 mM uranium concentration, while no decline trend found in 0.5 mM for the counted cells and uranium removal tests. No considerable expression of omcA and omcB (mtrC) genes were traced due to spontaneous mutagenesis during the in vitro serial passages, proposing a novel alternative EET pathway in S. azerbaijanica during uranium bioreduction process. The results could pave the way for further researches to modify the bioremediation process through genetic manipulation.

Biochar-mediated abiotic and biotic degradation of halogenated organic contaminants - A review

Prevailing global increases in population, urbanization, and agricultural production are causing increased pressures on water resources, especially as the use of chemicals in agriculture, industry, and medicine provide new challenges for water treatment and reuse. Organohalogen compounds are persistent contaminants that often evade current wastewater treatment technologies, resulting in their accumulation in the environment and posing a serious threat to ecosystem health. Recent advances in understanding pyrogenic carbons as electron shuttling and storing materials have exposed their potential for enhancing the dehalogenation and overall degradation of organohalide contaminants in soil, sediment, surface water, and wastewater systems. Biochar is a porous carbonaceous material produced during the thermochemical decomposition of biomass feedstock in the presence of little or no oxygen (pyrolysis). Interest in biochar for application towards environmental remediation is largely based on its three distinct benefits: I) carbon sequestration to offset greenhouse gas emissions, II) adsorption of (in-) organic contaminants and nutrients, and III) a strong electron exchange capacity. Due to the innate complexity of biochar materials, several electron transfer mechanisms exist by which biochar may mediate contaminant degradation. These electron transfer pathways include electron-accepting and donating cycles through redox-active functional groups and direct electron transfer via conductive carbon matrices. These mechanisms are responsible for biochar's participation in multiple redox-driven biogeochemical transformations with proven consequences for effective organohalogen remediation. This literature review summarizes the current knowledge on the mechanisms and processes through which biochar can directly or indirectly mediate the transformation of organohalogen compounds under various environmental conditions. Perspectives and research directions for future application of biochars for targeted remediation strategies are also discussed.

Self-Enclosed Bio-Photoelectrochemical Cell in Succulent Plants

Harvesting an electrical current from biological photosynthetic systems (live cells or isolated complexes) is typically achieved by immersion of the system into an electrolyte solution. In this study, we show that the aqueous solution found in the tissues of succulent plants can be used directly as a natural bio-photo electrochemical cell. Here, the thick water-preserving outer cuticle of the succulent Corpuscularia lehmannii serves as the electrochemical container, the inner water content as the electrolyte into which an iron anode and platinum cathode are introduced. We produce up to 20 μA/cm² bias-free photocurrent. When 0.5 V bias is added to the iron anode, the current density increases ∼10-fold, and evolved hydrogen gas can be collected with a Faradaic efficiency of 2.1 and 3.5% in dark or light, respectively. The addition of the photosystem II inhibitor 3-(3,4-dichlorophenyl)-1,1-dimethylurea inhibits the photocurrent, indicating that water oxidation is the primary source of electrons in the light. Two-dimensional fluorescence measurements show that NADH and NADPH serve as the major mediating electron transfer molecules, functionally connecting photosynthesis to metal electrodes. This work presents a method to simultaneously absorb CO₂ while producing an electrical current with minimal engineering requirements.

Sprayable biofilm – Agarose hydrogels as 3D matrix for enhanced productivity in bioelectrochemical systems

Bio-based energy production utilizing renewable resources can be realized by exoelectrogenic organisms and their application in bioelectrochemical systems (BES). These organisms catalyze the direct conversion of chemical into electrical energy and are already widely used in bioelectronics and biosensing. However, the biofilm-electrode interaction is a factor that limits sufficient space-time-yields for industrial applications. In this study, a hydrogel matrix consisting of agarose fibers was utilized as a scaffold for S. oneidensis cells to improve anodic processes in BES. This synthetic, scalable biofilm reached a higher current density in BES in comparison to naturally formed biofilms. Complemented with carbon nanofibers and riboflavin, the application of this functionalized hydrogel containing S. oneidensis cells led to an overall 9.1-fold increase in current density to 1324 mA m⁻² in comparison to 145 mA m⁻² for the planktonic control. In addition, the synthetic biofilm can be applied by spraying onto surfaces using a novel spray applicator. The latter allows to apply the biofilm effortless on large surfaces which will facilitate scalability and thus industrial application.

Co-fitness analysis identifies a diversity of signal proteins involved in the utilization of specific c-type cytochromes

Purpose

c-Type cytochromes are essential for extracellular electron transfer (EET) in electroactive microorganisms. The expression of appropriate c-type cytochromes is an important feature of these microorganisms in response to different extracellular electron acceptors. However, how these diverse c-type cytochromes are tightly regulated is still poorly understood.

Methods

In this study, we identified the high co-fitness genes that potentially work with different c-type cytochromes by using genome-wide co-fitness analysis. We also constructed and studied the co-fitness networks that composed of c-type cytochromes and the top 20 high co-fitness genes of them.

Results

We found that high co-fitness genes of c-type cytochromes were enriched in signal transduction processes in Shewanella oneidensis MR-1 cells. We then checked the top 20 co-fitness proteins for each of the 41 c-type cytochromes and identified the corresponding signal proteins for different c-type cytochromes. In particular, through the analysis of the high co-fitness signal protein for CymA, we further confirmed the cooperation between signal proteins and c-type cytochromes and identified a novel signal protein that is putatively involved in the regulation of CymA. In addition, we showed that these signal proteins form two signal transduction modules.

Conclusion

Taken together, these findings provide novel insights into the coordinated utilization of different c-type cytochromes under diverse conditions.

Direct Electricity Production from Nematostella and Arthemia's Eggs in a Bio-Electrochemical Cell

In recent years, extensive efforts have been made to develop clean energy technologies to replace fossil fuels to assist the struggle against climate change. One approach is to exploit the ability of bacteria and photosynthetic organisms to conduct external electron transport for electricity production in bio-electrochemical cells. In this work, we first show that the sea anemones Nematostella vectensis and eggs of Artemia (brine shrimp) secrete redox-active molecules that can reduce the electron acceptor Cytochrome C. We applied 2D fluorescence spectroscopy and identified NADH or NADPH as secreted species. Finally, we broaden the scope of living organisms that can be integrated with a bio-electrochemical cell to the sea anemones group, showing for the first time that Nematostella and eggs of Artemia can produce electrical current when integrated into a bio-electrochemical cell.

Influence of biocurrent self-generated by indigenous microorganisms on soil quality

The redox process driven by anaerobic respiration is a link between matter conversion and energy exchange in soil biogeochemistry. Microbial extracellular electron transfer forming biocurrents is a force in element cycling and community living in soil. However, the effect of indigenous microorganisms generating biocurrents on soil quality is unclear. We found that soil biocurrent showed little adverse influence on soil pH, cation exchange capacity, and available nitrogen, phosphorus and potassium and deblocked sequestered organic matter (29%). In addition, the bioelectric field derived from biocurrent obviously forced the migration of mineral elements, which was a supplement to the theory of water-salt transport, providing a new perspective on element transport. Moreover, the soil biocurrent directly regulated the availability of Ca and Fe (increase of 7-fold), indicating that electron transfer plays an important role in weathering and mineralization and thus pedogenesis. From a microbial ecology point of view, the soil bacterial richness and diversity were perfectly restored to their original state when the biocurrent stopped; including bacterial functions; although a temporary enrichment of certain species was observed. The above results provide new insights into the interactions between electron transfer and soil quality and confirm the safety of soil bioelectrochemical technology.

Efficient bioelectricity generation and carbazole biodegradation using an electrochemically active bacterium Sphingobium yanoikuyae XLDN2-5

Carbazole and its derivatives are polycyclic aromatic heterocycles with unusual toxicity and mutagenicity. However, disposal of these polycyclic aromatic heterocycles remains a significant challenge. This study focused on efficient resource recovery from carbazole using an obligate aerobe, Sphingobium yanoikuyae XLDN2-5, in microbial fuel cells (MFCs). S. yanoikuyae XLDN2-5 successfully achieved carbazole degradation and simultaneously electricity generation in MFCs with a maximum power density of 496.8 mW m^-2 and carbazole degradation rate of 100%. It is the first time that S. yanoikuyae XLDN2-5 was discovered as an electrochemically active bacterium with high extracellular electron transfer (EET) capability. Redox mediator analysis indicated that no self-produced redox mediators were found for S. yanoikuyae XLDN2-5 under analysis conditions, and the exogenous redox mediators used in this study did not promote its EET. The nanowires produced by S. yanoikuyae XLDN2-5 cells were found in the biofilm by morphology characterization and the growth process of the nanowires was consistent with the discharge process of the MFC. Conductivity determination further verified that the nanowires produced by S. yanoikuyae XLDN2-5 cells were electrically conductive. Based on these results, it is speculated that S. yanoikuyae XLDN2-5 may mainly utilize conductive nanowires produced by itself rather than redox mediators to meet the requirements of normal energy metabolism when it grows in the low dissolved oxygen zone of the anodic biofilm. These novel findings on the EET mechanism of S. yanoikuyae XLDN2-5 lay a foundation for further exploration of polycyclic aromatic heterocyclic pollutants treatment in electrochemical devices, which may create new biotechnology processes for these pollutants control.

Trichodesmium erythraeum produces a higher photocurrent than other cyanobacterial species in bio-photo electrochemical cells

The increase in world energy consumption, and the worries from potential future disasters that may derive from climate change have stimulated the development of renewable energy technologies. One promising method is the utilization of whole photosynthetic cyanobacterial cells to produce photocurrent in a bio-photo electrochemical cell (BPEC). The photocurrent can be derived from either the respiratory or photosynthetic pathways, via the redox couple NADP⁺/NADPH mediating cyclic electron transport between photosystem I inside the cells, and the anode. In the past, most studies have utilized the fresh-water cyanobacterium Synechocystis sp. PCC 6803 (Syn). Here, we show that the globally important marine cyanobacterium Trichodesmium erythraeum flourishing in the subtropical oceans can provide improved currents as compared to Syn. We applied 2D-fluorescence measurements to detect the secretion of NADPH and show that the resulting photocurrent production is enhanced by increasing the electrolyte salinity, Further enhancement of the photocurrent can be obtained by the addition of electron mediators such as NAD⁺, NADP⁺, cytochrome C, vitamin B1, or potassium ferricyanide. Finally, we produce photocurrent from additional cyanobacterial species: Synechocystis sp. PCC6803, Synechococcus elongatus PCC7942, Acaryochloris marina MBIC 11017, and Spirulina, using their cultivation media as electrolytes for the BPEC.

Highly efficient multiplex base editing: One-shot deactivation of eight genes in Shewanella oneidensis MR-1

Obtaining electroactive microbes capable of efficient extracellular electron transfer is a large undertaking for the scalability of bio-electrochemical systems. Inevitably, researchers need to pursue the co-modification of multiple genes rather than expecting that modification of a single gene would make a significant contribution to improving extracellular electron transfer rates. Base editing has enabled highly-efficient gene deactivation in model electroactive microbe Shewanella oneidensis MR-1. Since multiplexed application of base editing is still limited by its low throughput procedure, we thus here develop a rapid and efficient multiplex base editing system in S. oneidensis. Four approaches to express multiple gRNAs were assessed firstly, and transcription of each gRNA cassette into a monocistronic unit was validated as a more favorable option than transcription of multiple gRNAs into a polycistronic cluster. Then, a smart scheme was designed to deliver one-pot assembly of multiple gRNAs. 3, 5, and 8 genes were deactivated using this system with editing efficiency of 83.3%, 100% and 12.5%, respectively. To offer some nonrepetitive components as alternatives genetic parts of sgRNA cassette, different promoters, handles, and terminators were screened. This multiplex base editing tool was finally adopted to simultaneously deactivate eight genes that were identified as significantly downregulated targets in transcriptome analysis of riboflavin-overproducing strain and control strain. The maximum power density of the multiplex engineered strain HRF(8BE) in microbial fuel cells was 1108.1 mW/m², which was 21.67 times higher than that of the wild-type strain. This highly efficient multiplexed base editing tool elevates our ability of genome manipulation and combinatorial engineering in Shewanella, and may provide valuable insights in fundamental and applied research of extracellular electron transfer.

Humin and biochar accelerated microbial reductive dechlorination of 2,4,6-trichlorophenol under weak electrical stimulation

The extracellular electron transfer (EET) is regarded as one of the crucial factors that limit the application of the bioelectrochemical system (BES). In this study, two different solid-phase redox mediators (RMs), biochar (1.2 g/L, T-B) and humin (1.2 g/L, T-H) were used for boosting the microorganisms accessing the electrons required for 2,4,6-TCP dechlorination under weak electrical stimulation (-0.278 V vs. Standard hydrogen electrode). BES with dissolved RM anthraquinone-2,6-disulfonate (AQDS 0.5 mmol/L, T-A) was used as a comparison. The results showed that dechlorination of 2,4,6-TCP could be greatly accelerated by biochar (1.78 d^-1) and humin (1.50 d^-1) than AQDS (0.24 d^-1) and no RM control (T-M, 0.27 d^-1). Moreover, phenol became the predominant dechlorination product in T-H (78.5 %) and T-B (63.0 %) instead of 4-CP in T-M (67.1 %) and T-A (89.8 %). Pseudomonas, Sulfurospirillum, Desulfuromonas, Dehalobacter, Anaeromyxobacter, and Dechloromonas belonging to Proteobacteria or Firmicutes rather than Chloroflexi might be responsible for the dechlorination activity. Notably, different RMs tended to stimulate distinct electroactive bacteria. Pseudomonas was the most abundant microorganism in T-M (41.92 %) and T-A (17.24 %), while Rhodobacter was most prevalent in T-H (20.04 %) and Azonexus was predominant in T-B (48.48 %). This study is essential in advancing the understanding of EET in BES for microbial degradation of organohalide contaminants under weak electrical stimulation.

Suppressing Methane Production to Boost High-Purity Hydrogen Production in Microbial Electrolysis Cells

Hydrogen gas (H₂) is an attractive fuel carrier due to its high specific enthalpy; moreover, it is a clean source of energy because in the combustion reaction with oxygen (O₂) it produces water as the only byproduct. The microbial electrolysis cell (MEC) is a promising technology for producing H₂ from simple or complex organics present in wastewater and solid wastes. Methanogens and non-archaeal methane (CH₄)-producing microorganisms (NAMPMs) often grow in the MECs and lead to rapid conversion of produced H₂ to CH₄. Moreover, non-archaeal methane production (NAMP) catalyzed by nitrogenase of photosynthetic bacteria was always overlooked. Thus, suppression of CH₄ production is required to enhance H₂ yield and production rate. This review comprehensively addresses the principles and current state-of-the-art technologies for suppressing methanogenesis and NAMP in MECs. Noteworthy, specific strategies aimed at the inhibition of methanogenic enzymes and nitrogenase could be a more direct approach than physical and chemical strategies for repressing the growth of methanogenic archaea. In-depth studies on the multiomics of CH₄ metabolism can possibly provide insights into sustainable and efficient approaches for suppressing metabolic pathways of methanogenesis and NAMP. The main objective of this review is to highlight key concepts, directions, and challenges related to boosting H₂ generation by suppressing CH₄ production in MECs. Finally, perspectives are briefly outlined to guide and advance the future direction of MECs for production of high-purity H₂ based on genetic and metabolic engineering and on the interspecific interactions.

Novel Long-Chain Fatty Acid (LCFA)-Degrading Bacteria and Pathways in Anaerobic Digestion Promoted by Hydrochar as Revealed by Genome-Centric Metatranscriptomics Analysis

A large amount of long-chain fatty acids (LCFA) are generated after lipids hydrolysis in anaerobic digestion (AD), and LCFA are difficult to be biodegraded. This study showed that hydrochar (HC), which was produced during the hydrothermal liquefaction of organic wastes, significantly increased the methane production rate (by 56.9%) of oleate, a typical refractory model LCFA. Genomic-centric metatranscriptomics analysis revealed that three novel microbes (Bin138 Spirochaetota sp., Bin35 Smithellaceae sp., and Bin54 Desulfomonilia sp.) that were capable of degrading LCFA were enriched by HC, which played an important role in the degradation of oleate. LCFA was degraded to acetate through the well-known LCFA β-oxidation pathway and the combined β-oxidation and butyrate oxidation pathway. In addition, it was found that HC promoted the direct interspecies electron transfer (DIET) between Methanothrix sp. and Bin54 Desulfomonilia sp. The enriched new types of LCFA-degrading bacteria and the promotion of DIET contributed to the improved methane production rate of oleate by HC. IMPORTANCE Long-chain fatty acids (LCFA) are difficult to be degraded in anaerobic digestion (AD), and the known LCFA degrading bacteria are only limited to the families Syntrophomonadaceae and Syntrophaceae. Here, we found that hydrochar effectively promoted AD of LCFA, and the new LCFA-degrading bacteria and a new metabolic pathway were also revealed based on genomic-centric metatranscriptomic analysis. This study provided a new method for enhancing the AD of organic wastes with high content of LCFA and increased the understanding of the microbes and their metabolic pathways involved in AD of LCFA.

Harnessing photosynthesis to produce electricity using cyanobacteria, green algae, seaweeds and plants

The conversion of solar energy into electrical current by photosynthetic organisms has the potential to produce clean energy. Life on earth depends on photosynthesis, the major mechanism for biological conversion of light energy into chemical energy. Indeed, billions of years of evolution and adaptation to extreme environmental habitats have resulted in highly efficient light-harvesting and photochemical systems in the photosynthetic organisms that can be found in almost every ecological habitat of our world. In harnessing photosynthesis to produce green energy, the native photosynthetic system is interfaced with electrodes and electron mediators to yield bio-photoelectrochemical cells (BPECs) that transform light energy into electrical power. BPECs utilizing plants, seaweeds, unicellular photosynthetic microorganisms, thylakoid membranes or purified complexes, have been studied in attempts to construct efficient and non-polluting BPECs to produce electricity or hydrogen for use as green energy. The high efficiency of photosynthetic light-harvesting and energy production in the mostly unpolluting processes that make use of water and CO₂ and produce oxygen beckons us to develop this approach. On the other hand, the need to use physiological conditions, the sensitivity to photoinhibition as well as other abiotic stresses, and the requirement to extract electrons from the system are challenging. In this review, we describe the principles and methods of the different kinds of BPECs that use natural photosynthesis, with an emphasis on BPECs containing living oxygenic photosynthetic organisms. We start with a brief summary of BPECs that use purified photosynthetic complexes. This strategy has produced high-efficiency BPECs. However, the lifetimes of operation of these BPECs are limited, and the preparation is laborious and expensive. We then describe the use of thylakoid membranes in BPECs which requires less effort and usually produces high currents but still suffers from the lack of ability to self-repair damage caused by photoinhibition. This obstacle of the utilization of photosynthetic systems can be significantly reduced by using intact living organisms in the BPEC. We thus describe here progress in developing BPECs that make use of cyanobacteria, green algae, seaweeds and higher plants. Finally, we discuss the future challenges of producing high and longtime operating BPECs for practical use.

Autotrophic nitrate reduction to ammonium via reverse electron transfer in Geobacter dominated biofilm

Geobacter dominated electroactive biofilms (EABs) have been demonstrated to perform bidirectional extracellular electron transfer (EET) in bioelectrochemical systems, but it is largely unknown when nitrate is the electron acceptor at the cathode. If reverse EET occurs on biocathode, this EAB has to perform dissimilatory nitrate reduction to ammonia (DNRA) rather than denitrification according to genomes. Here, we have proven the feasibility of reverse bioelectron transfer in EAB, achieving a DNRA efficiency up to 93 ± 3% and high Faraday efficiency of 74 ± 1%. Constant current was found to be more effective than constant potential to maintain Geobacter on the cathode, which highly determines this electrotrophic respiration. The prevalent DNRA at constant current surpassed denitrification, demonstrated by the reverse tendencies of DNRA (nrfA) and denitrification (nirS and nirK) gene transcription. Metatranscriptomics further revealed the possible electron uptake mechanisms by which the outer membrane (OmcZ and OmcB) and periplasmic cytochromes (PpcB and PpcD) may be involved. These findings extend our understanding of the bidirectional electron transfer and advance the applications of EABs.

Biomaterials and Electroactive Bacteria for Biodegradable Electronics

The global production of unrecycled electronic waste is extensively growing each year, urging the search for alternatives in biodegradable electronic materials. Electroactive bacteria and their nanowires have emerged as a new route toward electronic biological materials (e-biologics). Recent studies on electron transport in cable bacteria—filamentous, multicellular electroactive bacteria—showed centimeter long electron transport in an organized conductive fiber structure with high conductivities and remarkable intrinsic electrical properties. In this work we give a brief overview of the recent advances in biodegradable electronics with a focus on the use of biomaterials and electroactive bacteria, and with special attention for cable bacteria. We investigate the potential of cable bacteria in this field, as we compare the intrinsic electrical properties of cable bacteria to organic and inorganic electronic materials. Based on their intrinsic electrical properties, we show cable bacteria filaments to have great potential as for instance interconnects and transistor channels in a new generation of bioelectronics. Together with other biomaterials and electroactive bacteria they open electrifying routes toward a new generation of biodegradable electronics.

Complete genome sequence of Pseudomonas stutzeri S116 owning bifunctional catalysis provides insights into affecting performance of microbial fuel cells

Background

Pseudomonas stutzeri S116 is a sulfur-oxidizing bacteria isolated from marine sludge. It exhibited excellent electricity generation as bioanode and biocathode applied in microbial fuel cells (MFCs). Complete genome sequencing of P. stutzeri and cyclic voltammetry method were performed to reveal its mechanism in microbial fuel cells system.

Results

This study indicated that the MFCs generated a maximum output voltage of 254.2 mV and 226.0 mV, and maximum power density of 765 mW/m² and 656.6 mW/m² respectively. Complete genome sequencing of P. stutzeri S116 was performed to indicate that most function genes showed high similarities with P. stutzeri, and its primary annotations were associated with energy production and conversion (6.84%), amino acid transport and metabolism (6.82%) and inorganic ion transport and metabolism (6.77%). Homology of 36 genes involved in oxidative phosphorylation was detected, which suggests the strain S116 possesses an integrated electron transport chain. Additionally, many genes encoding pilus-assembly proteins and redox mediators (riboflavin and phenazine) were detected in the databases. Thiosulfate oxidization and dissimilatory nitrate reduction were annotated in the sulfur metabolism pathway and nitrogen metabolism pathway, respectively. Gene function analysis and cyclic voltammetry indicated that P. stutzeri probably possesses cellular machinery such as cytochrome c and redox mediators and can perform extracellular electron transfer and produce electricity in MFCs.

Conclusion

The redox mediators secreted by P. stutzeri S116 were probably responsible for performance of MFCs. The critical genes and metabolic pathways involved in thiosulfate oxide and nitrate reduction were detected, which indicated that the strain can treat wastewater containing sulfide and nitrite efficiently.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12866-022-02552-8.

Protocol for bioelectrochemical enrichment, cultivation, and characterization of extreme electroactive microorganisms

Electroactive microorganisms (EAMs) are a group of microbes that can access solid extracellular electron donors or acceptors via extracellular electron transfer processes. EAMs are useful in developing various microbial electrochemical technologies. This protocol describes the use of bioelectrochemical systems (BESs) to enrich EAMs at the cathode from an extreme haloalkaline habitat. It also provides information for a detailed characterization of enriched cathodic biofilms via various cross-disciplinary techniques, including electrochemical, analytical, microscopic, and gene sequencing techniques.

For complete details on the use and execution of this protocol, please refer to Chaudhary et al. (2021).

•

Detailed protocol for the electrochemical enrichment of extreme microorganisms

•

Useful for cultivating different microbes at cathode of bioelectrochemical systems

•

Protocols for characterizing electrotrophic biofilm and metabolic products provided

•

These include electrochemical, analytical, microscopic, and gene sequencing techniques

Let's chat: Communication between electroactive microorganisms

Electroactive microorganisms can exchange electrons with other cells or conductive interfaces in their extracellular environment. This property opens the way to a broad range of practical biotechnological applications, from manufacturing sustainable chemicals via electrosynthesis, to bioenergy, bioelectronics or improved, low-energy demanding wastewater treatments. Besides, electroactive microorganisms play key roles in environmental bioremediation, significantly impacting process efficiencies. This review highlights our present knowledge on microbial interactions promoting the communication between electroactive microorganisms in a biofilm on an electrode in bioelectrochemical systems (BES). Furthermore, the immediate knowledge gaps that must be closed to develop novel technologies will also be acknowledged.

Development of Whole Genome-Scale Base Editing Toolbox to Promote Efficiency of Extracellular Electron Transfer in Shewanella oneidensis MR-1

Shewanella oneidensis MR-1, as a model electroactive microorganism (EAM) for extracellular electron transfer (EET) study, plays a key role in advancing practical applications of bio-electrochemical systems (BES). Efficient genome-level manipulation tools are vital to promote EET efficiency; thus, a powerful and rapid base editing toolbox in S. oneidensis MR-1 is developed. Firstly a CRISPR/dCas9-AID base editor that shows a relatively narrow editing window restricted to the "-20 to -16" range upstream of the protospacer adjacent motif (PAM) is constructed. Cas9 is also confined by its native PAM requirement, NGG. Then to expand the editable scope, the sgRNA and the Cas-protein to broaden the editing window to "-22 to -9" upstream of the PAM are engineered, and the PAM field to NNN is opened up. Consequently, the coverage of the editable gene is expanded from 89% to nearly 100% in S. oneidensis MR-1. This whole genome-scale cytidine deaminase-based base editing toolbox (WGcBE) is applied to regulate the cell length and the biofilm morphology, which enhances the EET efficiency by 6.7-fold. WGcBE enables an efficient deactivation of genes with full genome coverage, which would contribute to the in-depth and multi-faceted EET study in Shewanella.