Accelerated Reaction Kinetics in Microdroplets: Overview and Recent Developments

Interfacial Effects of Catalysis in Pickering Emulsions

Liquid-liquid or gas-liquid interfaces are ubiquitous in nature and in industrial production. Understanding the unique effects arising from the asymmetric interfaces and controlling the catalytic reactions are frontiers of physical chemistry. However, our understanding of the reactivity and selectivity at the interfaces remains scant. Pickering emulsions are emerging as a stable biphasic reaction system, which provides a new opportunity for clarifying the inherent features responsible for prominent interfacial reactivity or selectivity. This Perspective tentatively discusses the unique effects of interfacial adsorption, hydrogen bonding of water molecules, and strong electric field at the interfaces. Additionally, it highlights key insights into the fundamental mechanisms of reaction kinetic and thermodynamic alterations, molecular orientations, and the spontaneous generation of reactive species at the interfaces through representative examples. Finally, we delineate the current challenges and propose future research directions. The perspectives advanced herein may serve as valuable guidance for the design of efficient interfacial catalytic systems.

Valence Electronic Structure of Interfacial Phenol in Water Droplets

Biochemistry and a large part of atmospheric chemistry occur in aqueous environments or at aqueous interfaces, where (photo)chemical reaction rates can be increased by up to several orders of magnitude. The key to understanding the chemistry and photoresponse of molecules in and "on" water lies in their valence electronic structure, with a sensitive probe being photoelectron spectroscopy. This work reports velocity-map photoelectron imaging of submicrometer-sized aqueous phenol droplets in the valence region after nonresonant (288 nm) and resonance-enhanced (274 nm) two-photon ionization with femtosecond ultraviolet light, complementing previous liquid microjet studies. For nonresonant photoionization, our concentration-dependent study reveals a systematic decrease in the vertical binding energy (VBE) of aqueous phenol from 8.0 ± 0.1 eV at low concentration (0.01 M) to 7.6 ± 0.1 eV at high concentration (0.8 M). We attribute this shift to a systematic lowering of the energy of the lowest cationic state with increasing concentration caused by the phenol dimer and aggregate formation at the droplet surface. Contrary to nonresonant photoionization, no significant concentration dependence of the VBE was observed for resonance-enhanced photoionization. We explain the concentration-independent VBE of ∼8.1 eV observed upon resonant ionization by ultrafast intermediate state relaxation and changes in the accessible Franck-Condon region as a consequence of the lowering of the intermediate state potential energy due to the formation of phenol excimers and excited phenol aggregates. Correcting for the influence of electron transport scattering in the droplets reduced the measured VBEs by 0.1-0.2 eV.

Enhanced condensation kinetics in aqueous microdroplets driven by coupled surface reactions and gas-phase partitioning

Although aqueous microdroplets have been shown to exhibit enhanced chemical reactivity compared to bulk solutions, mechanisms for these enhancements are not completely understood. Here we combine experimental measurements and kinetic modeling to show the strong coupling of interfacial reactions and gas/droplet partitioning in the condensation reaction of pyruvic acid (PA) to yield zymonic acid (ZA) in acidic aqueous microdroplets. Experimental analysis of single microdroplets reveals the substantial influence of evaporation of PA and partitioning of water on the size-, relative humidity (RH)- and temperature-dependent sigmoidal reaction kinetics for the condensation reaction. A newly developed diffusion-reaction-partitioning model is used to simulate the complex kinetics observed in the microdroplets. The model can quantitatively predict the size and compositional changes as the reaction proceeds under different environmental conditions, and provides insights into how microdroplet reactivity is controlled by coupled interfacial reactions and the gas-phase partitioning of PA and water. Importantly, the kinetic model best fits the data when an autocatalytic step is included in the mechanism, i.e. a reaction step where the product, ZA, catalyzes the interfacial condensation reaction. Overall, the dynamic nature of aqueous microdroplet chemistry and the coupling of interfacial chemistry with gas-phase partitioning are demonstrated. Furthermore, autocatalysis of small organic molecules at the air-water interface for aqueous microdroplets, shown here for the first time, has implications for several fields including prebiotic chemistry, atmospheric chemistry and chemical synthesis.

Inverse Phase Transition in Droplet Clusters Levitating over the Locally Heated Water Layer

Self-assembled microdroplet clusters can levitate above a locally heated water surface. Normally, the temperature of droplets is in the range of 50-95 °C. However, it is possible to generate clusters at lower temperatures. Here, we study the structure and behavior of such cold-stabilized droplet clusters with variable temperature. It has been established that as the temperature decreases, the role of aerodynamic forces decreases, while electrostatic forces, on the contrary, increase. We studied the behavior of droplet clusters at relatively low temperatures down to 28 °C. A chaotic motion of droplets and a phase transition were observed at the surface temperature of the water below a critical value of about Tmax = 35 ± 2 °C. The orderliness of the cluster was quantified with the Shannon/Voronoi entropy. Several stages of cluster evolution were observed and analyzed, and a mechanism of this phenomenon is discussed. An inverse phase transition in which cooling of the cluster decreases its orderliness is discussed. Frequencies of the droplets' oscillations coincide qualitatively with the frequency of the plasma oscillations within the cluster.

Localization and Orientation of Dye Molecules at the Surface of a Levitated Microdroplet in Air Revealed by Whispering Gallery Mode Resonances

Microdroplets offer unique environments that accelerate chemical reactions; however, the mechanisms behind these processes remain debated. The localization and orientation of solute molecules near the droplet surface have been proposed as factors for this acceleration. Since significant reaction acceleration has been observed for electrospray- and sonic-spray-generated aerosol droplets, the analysis of microdroplets in air has become essential. Here, we utilized whispering gallery mode (WGM) resonances to investigate the localization and orientation of dissolved rhodamine B (RhB) in a levitated microdroplet (∼3 μm in diameter) in air. Fluorescence enhancement upon resonance with the WGMs revealed the localization and orientation of RhB near the droplet surface. Numerical modeling using Mie theory quantified the RhB orientation at 68° to the surface normal, with a small fraction randomly oriented inside the droplet. Additionally, low RhB concentrations increased surface localization. These results support the significance of surface reactions in the acceleration of microdroplet reactions.

Enhanced Electrochemiluminescence at the Gas/Liquid Interface of Bubbles Propelled into Solution

Electrochemiluminescence (ECL) is typically confined to a micrometric region from the electrode surface. This study demonstrates that ECL emission can extend up to several millimeters away from the electrode employing electrogenerated chlorine bubbles. The mechanism behind this bubble-enhanced ECL was investigated using an Au microelectrode in chloride-containing and chloride-free electrolyte solutions. We discovered that ECL emission at the gas/solution interface is driven by two parallel effects. First, the bubble corona effect facilitates the generation of hydroxyl radicals capable of oxidizing luminol while the bubble is attached to the surface. Second, hypochlorite generated from chlorine sustains luminol emission for over 200 s and extends the emission range up to 5 mm into the solution, following bubble detachment. The new approach can increase the emission intensity of luminol-based assays 5-fold compared to the conventional method. This is demonstrated through a glucose bioassay, using a midrange mobile phone camera for detection. These findings significantly expand the potential applications of ECL by extending its effective range in time and space.

Catalyst-Free Transformation of Carbon Dioxide to Small Organic Compounds in Water Microdroplets Nebulized by Different Gases

A straightforward nebulized spray system is designed to explore the hydrogenation of carbon dioxide (CO2) within water microdroplets surrounded by different gases such as carbon dioxide, nitrogen, oxygen, and compressed air. The collected droplets are analyzed using water-suppressed nuclear magnetic resonance (NMR). Formate anion (HCOO-), acetate anion (CH3COO-), ethylene glycol (HOCH2CH2OH), and methane (CH4) are detected when water is nebulized. This pattern persisted when the water is saturated with CO2, indicating that CO2 in the nebulizing gas triggers the formation of these small organics. In a pure CO2 atmosphere, the formate anion concentration is determined to be ≈70 µm, referenced to dimethyl sulfoxide, which has been introduced as an internal standard in the collected water droplets. This study highlights the power of water microdroplets to initiate unexpected chemistry for the transformation of CO2 to small organic compounds.

Reaction acceleration at the surface of a levitated droplet by vapor dosing from a partner droplet

Chemical reactions in micrometer-sized droplets can be accelerated by up to six orders of magnitude. However, this acceleration factor (ratio of rate constants relative to bulk) drops to less than 10 for millimeter-sized droplets due to the reduction in surface/volume ratio. To enhance the acceleration in millimeter-sized droplets, we use a new synthesis platform that directly doses reagent vapor onto the reaction droplet surface from a second levitated droplet. Using Katritzky transamination as a model reaction, we made quantitative measurements on size-controlled vapor-dosed droplets, revealing a 31-fold increase in reaction rate constants when examining the entire droplet contents. This enhancement is attributed to a greater reaction rate constant in the droplet surface region (estimated as 105 times greater than that for the bulk). The capability for substantial reaction acceleration in large droplets highlights the potential for rapid synthesis of important chemicals at useful scales. For example, we successfully prepared 23 pyridinium salts within minutes. This efficiency positions droplets as an exceptional platform for rapid, in situ catalyst synthesis. This is illustrated by the preparation of pyridinium salts as photocatalysts and their subsequent use in mediation of amine oxidation both within the same droplet.

The Structure of Carbon Dioxide at the Air-Water Interface and its Chemical Implications

The efficient reduction of CO2 into valuable products is a challenging task in an international context marked by the climate change crisis and the need to move away from fossil fuels. Recently, the use of water microdroplets has emerged as an interesting reaction media where many redox processes which do not occur in conventional solutions take place spontaneously. Indeed, several experimental studies in microdroplets have already been devoted to study the reduction of CO2 with promising results. The increased reactivity in microdroplets is thought to be linked to unique electrostatic solvation effects at the air-water interface. In the present work, we report a theoretical investigation on this issue for CO2 using first-principles molecular dynamics simulations. We show that CO2 is stabilized at the interface, where it can accumulate, and that compared to bulk water solution, its electron capture ability is larger. Our results suggest that reduction of CO2 might be easier in interface-rich systems such as water microdroplets, which is in line with early experimental data and indicate directions for future laboratory studies. The effect of other relevant factors which could play a role in CO2 reduction potential is discussed.

Double-Layer Distribution of Hydronium and Hydroxide Ions in the Air-Water Interface

The acid-base nature of the aqueous interface has long been controversial. Most macroscopic experiments suggest that the air-water interface is basic based on the detection of negative charges at the interface that indicates the enrichment of hydroxides (OH-), whereas microscopic studies mostly support the acidic air-water interface with the observation of hydronium (H3O+) accumulation in the top layer of the interface. It is crucial to clarify the interfacial preference of OH- and H3O+ ions for rationalizing the debate. In this work, we perform deep potential molecular dynamics simulations to investigate the preferential distribution of OH- and H3O+ ions at the aqueous interfaces. The neural network potential energy surface is trained based on density functional theory calculations with the SCAN functional, which can accurately describe the diffusion of these two ions both in the interface and in the bulk water. In contrast to the previously reported single ion enrichment, we show that both OH- and H3O+ surprisingly prefer to accumulate in interfaces but at different interfacial depths, rendering a double-layer ionic distribution within ∼1 nm near the Gibbs dividing surface. The H3O+ preferentially resides in the topmost layer of the interface, but the OH-, which is enriched in the deeper interfacial layer, has a higher equilibrium concentration due to the more negative free energy of interfacial stabilization [-0.90 (OH-) vs -0.56 (H3O+) kcal/mol]. The present finding of the ionic double-layer distribution may qualitatively offer a self-consistent explanation for the long-term controversy about the acid-base nature of the air-water interface.

Tailoring Heterostructure Growth on Liquid Metal Nanodroplets through Interface Engineering

Liquid metal (LM) nanodroplets possess intriguing surface properties, thus offering promising potential in chemical synthesis, catalysis, and biomedicine. However, the reaction kinetics and product growth at the surface of LM nanodroplets are significantly influenced by the interface involved, which has not been thoroughly explored and understood. Here, we propose an interface engineering strategy, taking a spontaneous galvanic reaction between Ga0 and AuCl4- ions as a representative example, to successfully modulate the growth of heterostructures on the surface of Ga-based LM nanodroplets by establishing a dielectric interface with a controllable thickness between LM and reactive surroundings. Combining high-resolution electron energy-loss spectroscopy (EELS) analysis and theoretical simulation, it was found that the induced charge distribution at the interface dominates the spatiotemporal distribution of the reaction sites. Employing tungsten oxide (WOx) with varying thicknesses as the demonstrated dielectric interface of LM, Ga@WOx@Au with distinct core-shell-satellite or dimer-like heterostructures has been achieved and exhibited different photoresponsive capabilities for photodetection. Understanding the kinetics of product growth and the regulatory strategy of the dielectric interface provides an experimental approach to controlling the structure and properties of products in LM nanodroplet-involved chemical processes.

Dielectrophoretic bead-droplet reactor for solid-phase synthesis

Solid-phase synthesis underpins many advances in synthetic and combinatorial chemistry, biology, and material science. The immobilization of a reacting species on the solid support makes interfacing of reagents an important challenge in this approach. In traditional synthesis columns, this leads to reaction errors that limit the product yield and necessitates excess consumption of the mobile reagent phase. Although droplet microfluidics can mitigate these problems, its adoption is fundamentally limited by the inability to controllably interface microbeads and reagent droplets. Here, we introduce Dielectrophoretic Bead-Droplet Reactor as a physical method to implement solid-phase synthesis on individual functionalized microbeads by encapsulating and ejecting them from microdroplets by tuning the supply voltage. Proof-of-concept demonstration of the enzymatic coupling of fluorescently labeled nucleotides onto the bead using this reactor yielded a 3.2-fold higher fidelity over columns through precise interfacing of individual microreactors and beads. Our work combines microparticle manipulation and droplet microfluidics to address a long-standing problem in solid-phase synthesis with potentially wide-ranging implications.

Spontaneous ligand loss by soft landed [Ni(bpy)3]2+ ions on perfluorinated self-assembled monolayer surfaces

Transition metal (TM) complexes are widely used in catalysis, photochemical energy conversion, and sensing. Understanding factors that affect ligand loss from TM complexes at interfaces is important both for generating catalytically-active undercoordinated TM complexes and for controlling the degradation pathways of photosensitizers and photoredox catalysts. Herein, we demonstrate that well-defined TM complexes prepared on surfaces using ion soft landing undergo substantial structural rearrangements resulting in ligand loss and formation of both stable and reactive undercoordinated species. We employ nickel bipyridine (Ni-bpy) cations as a model system and explore their structural reorganization on surfaces using a combination of experimental and computational approaches. The controlled preparation of surface layers by mass-selected deposition of [Ni(bpy)3]2+ cations provides insights into the chemical reactivity of these species on surfaces. Both surface characterization using mass spectrometry and electronic structure calculations using density functional theory (DFT) indicate that [Ni(bpy)3]2+ undergoes a substantial geometry distortion on surfaces in comparison with its gas-phase structure. This distortion reduces the ligand binding energy and facilitates the formation of the undercoordinated [Ni(bpy)2]2+. Additionally, charge reduction by the soft landed [Ni(bpy)3]2+ facilitates ligand loss. We observe that ligand loss is inhibited by co-depositing [Ni(bpy)3]2+ with a stable anion such as closo-dodecaborate dianion, [B12F12]2-. The strong electrostatic interaction between [Ni(bpy)3]2+ and [B12F12]2- diminishes the distortion of the cation due to interactions with the surface. This interaction stabilizes the soft landed cation by reducing the extent of charge reduction and its structural reorganization. Overall, this study shows the intricate interplay of charge state, ion surface interactions, and stabilization by counterions on the structure and reactivity of metal complexes on surfaces. The combined experimental and computational approach used in this study offers detailed insights into factors that affect the integrity and stability of active species relevant to energy production and catalysis.

Demethylation C-C coupling reaction facilitated by the repulsive Coulomb force between two cations

Carbon chain elongation (CCE) is normally carried out using either chemical catalysts or bioenzymes. Herein we demonstrate a catalyst-free approach to promote demethylation C-C coupling reactions for advanced CCE constructed with functional groups under ambient conditions. Accelerated by the electric field, two organic cations containing a methyl group (e.g., ketones, acids, and aldehydes) approach each other with such proximity that the energy of the repulsive Coulomb interaction between these two cations exceeds the bond energy of the methyl group. This results in the elimination of a methyl cation and the coupling of the residual carbonyl carbon groups. As confirmed by high-resolution mass spectrometry and isotope-labeling experiments, the C-C coupling reactions (yields up to 76.5%) were commonly observed in the gas phase or liquid phase, for which the mechanism was further studied using molecular dynamics simulations and stationary-point calculations, revealing deep insights and perspectives of chemistry.

Photochemically Driven Peptide Formation in Supersaturated Aerosol Droplets

The condensation of amino acids into peptides plays a crucial role in protein synthesis and is thus essential for understanding the origins of life. However, the spontaneous formation of peptides from amino acids in bulk aqueous media is energetically unfavorable, posing a challenge for elucidating plausible abiotic mechanisms. In this study, we investigate the formation of amide bonds between amino acids within highly supersaturated aerosol droplets containing dicyandiamide (DCD), a cyanide derivative potentially present on primordial Earth. Metastable states, i.e. supersaturation, within individual micron-sized droplets are studied using both an optical trap and a linear quadrupole electrodynamic balance. When irradiated with intense visible light, amide bond formation is observed to occur and can be monitored using vibrational bands in Raman spectra. The reaction rate is found to be strongly influenced by droplet size and kinetic modelling suggests that it is driven by the photochemical product of a DCD self-reaction. Our results highlight the potential of atmospheric aerosol particles as reaction environments for peptide synthesis and have potential implications for the prebiotic chemistry of early Earth.

An Electrochemical Perspective on Reaction Acceleration in Microdroplets

Analytical techniques operating at the nanoscale introduce confinement as a tool at our disposal. This review delves into the phenomenon of accelerated reactivity within micro- and nanodroplets. A decade of accelerated reactivity observations was succeeded by several years of fundamental studies aimed at mechanistic enlightenment. Herein, we provide a brief historical context for rate enhancement in and around micro- and nanodroplets and summarize the mechanisms that have been proposed to contribute to such extraordinary reactivity. We highlight recent electrochemical reports that make use of restricted mass transfer to enhance electrochemical reactions and/or quantitatively measure reaction rates within droplet-confined electrochemical cells. A comprehensive approach to nanodroplet reactivity is paramount to understanding how nature takes advantage of these systems to provide life on Earth and, in turn, how to harness the full potential of such systems.

Spontaneous α-C-H Carboxylation of Ketones by Gaseous CO2 at the Air-water Interface of Aqueous Microdroplets

We present a catalyst-free route for the reduction of carbon dioxide integrated with the formation of a carbon-carbon bond at the air/water interface of negatively charged aqueous microdroplets, at ambient temperature. The reactions proceed through carbanion generation at the α-carbon of a ketone followed by nucleophilic addition to CO2. Online mass spectrometry reveals that the product is an α-ketoacid. Several factors, such as the concentration of the reagents, pressure of CO2 gas, and distance traveled by the droplets, control the kinetics of the reaction. Theoretical calculations suggest that water in the microdroplets facilitates this unusual chemistry. Furthermore, such a microdroplet strategy has been extended to seven different ketones. This work demonstrates a green pathway for the reduction of CO2 to useful carboxylated organic products.

Single Liquid Aerosol Microparticle Electrochemistry on a Suspended Ionic Liquid Film

Liquid aerosols are ubiquitous in nature, and several tools exist to quantify their physicochemical properties. As a measurement science technique, electrochemistry has not played a large role in aerosol analysis because electrochemistry in air is rather difficult. Here, a remarkably simple method is demonstrated to capture and electroanalyze single liquid aerosol particles with radii on the order of single micrometers. An electrochemical cell is constructed by a microwire (cylindrical working electrode) traversing a film of ionic liquid (1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide) that is suspended within a wire loop (reference/counter electrode). An ionic liquid is chosen because the low vapor pressure preserves the film over weeks, vastly improving suspended film electroanalysis. The resultant high surface area allows the suspended ionic liquid cell to act as an aerosol net. Given the hydrophobic nature of the ionic liquid, aqueous aerosol particles do not coalesce into the film. When the liquid aerosols collide with the sufficiently biased microwire (creating a complex boundary: aerosol|wire|ionic liquid|air), the electrochemistry within a single liquid aerosol particle can be interrogated in real-time. The ability to achieve liquid aerosol size distributions for aerosols over 1 µm in radius is demonstrated.

Quantifying the interfacial tension of adsorbed droplets on electrified interfaces

HYPOTHESIS

This paper develops a new measurement method to answer the question: How does one measure the interfacial tension of adsorbed droplets?

EXPERIMENTS

This measurement is based on the placement of a bubble at a water|organic interface. To prove the concept, a bubble was formed by pipetting gas below the water|1,2-dichloroethane interface. Our values agree well with previous reports. We then extended the measurement modality to a more difficult system: quantifying interfacial tension of 1,2-dichloroethane droplets adsorbed onto conductors. Carbon dioxide was generated in the aqueous phase from the electro-oxidation of oxalate. Given carbon dioxide's solubility in 1,2-dichloroethane, it partitions, a bubble nucleates, and the bubble can be seen by microscopy when driving the simultaneous oxidation of tris(bipyridine)ruthenium (II), a molecule that will interact with CO2.-. and provide light through electrochemiluminescence. We can quantify the interfacial tension of adsorbed droplets, a measurement very difficult performed with more usual techniques, by tracking the growth of the bubble and quantifying the bubble size at the time the bubble breaks through the aqueous|1,2-dichloroethane interface.

FINDINGS

We found that the interfacial tension of nanoliter 1,2-dichloroethane droplets adsorbed to an electrified interface in water, which was previously immeasurable with current techniques, was one order of magnitude less than the bulk system.

Impact of interfacial curvature on molecular properties of aqueous interfaces

The curvature of soft interfaces plays a crucial role in determining their mechanical and thermodynamic properties, both at macroscopic and microscopic scales. In the case of air/water interfaces, particular attention has recently focused on water microdroplets, due to their distinctive chemical reactivity. However, the specific impact of curvature on the molecular properties of interfacial water and interfacial reactivity has so far remained elusive. Here, we use molecular dynamics simulations to determine the effect of curvature on a broad range of structural, dynamical, and thermodynamical properties of the interface. For a droplet, a flat interface, and a cavity, we successively examine the structure of the hydrogen-bond network and its relation to vibrational spectroscopy, the dynamics of water translation, rotation, and hydrogen-bond exchanges, and the thermodynamics of ion solvation and ion-pair dissociation. Our simulations show that curvature predominantly impacts the hydrogen-bond structure through the fraction of dangling OH groups and the dynamics of interfacial water molecules. In contrast, curvature has a limited effect on solvation and ion-pair dissociation thermodynamics. For water microdroplets, this suggests that the curvature alone cannot fully account for the distinctive reactivity measured in these systems, which are of great importance for catalysis and atmospheric chemistry.

Colorimetric detection of electrolyte ions in blood based on biphasic microdroplet extraction

BACKGROUND

Timely diagnosis and prevention of diseases require rapid and sensitive detection of biomarkers from blood samples without external interference. Abnormal electrolyte ion levels in the blood are closely linked to various physiological disorders, including hypertension. Therefore, accurate, interference-free, and precise measurement of electrolyte ion concentrations in the blood is particularly important.

RESULTS

In this work, a colorimetric sensor based on a biphasic microdroplet extraction is proposed for the detection of electrolyte ions in the blood. This sensor employs mini-pillar arrays to facilitate contact between adjacent blood microdroplets and organic microdroplets serving as sensing phases, with any color changes being monitored through a smartphone's colorimetric software. The sensor is highly resistant to interference and does not require pre-treatment of the blood samples. Remarkably, the sensor exhibits exceptional reliability and stability, allowing for rapid enrichment and detection of K+, Na+, and Cl- in the blood within 10 s (Cl-), 15 s (K+) and 40 s (Na+) respectively.

SIGNIFICANCE

The colorimetric sensor based on biphasic microdroplet extraction offers portability due to its compact size and ease of operation without the need for large instruments. Additionally, it is location-independent, making it a promising tool for real-time biomarker detection in body fluids such as blood.

Surfactant Partitioning Dynamics in Freshly Generated Aerosol Droplets

Aerosol droplets are unique microcompartments with relevance to areas as diverse as materials and chemical synthesis, atmospheric chemistry, and cloud formation. Observations of highly accelerated and unusual chemistry taking place in such droplets have challenged our understanding of chemical kinetics in these microscopic systems. Due to their large surface-area-to-volume ratios, interfacial processes can play a dominant role in governing chemical reactivity and other processes in droplets. Quantitative knowledge about droplet surface properties is required to explain reaction mechanisms and product yields. However, our understanding of the compositions and properties of these dynamic, microscopic interfaces is poor compared to our understanding of bulk processes. Here, we measure the dynamic surface tensions of 14-25 μm radius (11-65 pL) droplets containing a strong surfactant (either sodium dodecyl sulfate or octyl-β-D-thioglucopyranoside) using a stroboscopic imaging approach, enabling observation of the dynamics of surfactant partitioning to the droplet-air interface on time scales of 10s to 100s of microseconds after droplet generation. The experimental results are interpreted with a state-of-the-art kinetic model accounting for the unique high surface-area-to-volume ratio inherent to aerosol droplets, providing insights into both the surfactant diffusion and adsorption kinetics as well as the time-dependence of the interfacial surfactant concentration. This study demonstrates that microscopic droplet interfaces can take up to many milliseconds to reach equilibrium. Such time scales should be considered when attempting to explain observations of accelerated chemistry in microcompartments.

Chemical Kinetics in Microdroplets

Micrometer-sized compartments play significant roles in driving heterogeneous transformations within atmospheric and biochemical systems as well as providing vehicles for drug delivery and novel reaction environments for the synthesis of industrial chemicals. Many reports now indicate that reaction kinetics are accelerated under microconfinement, for example, in sprays, thin films, droplets, aerosols, and emulsions. These observations are dramatic, posing a challenge to our understanding of chemical reaction mechanisms with potentially significant practical consequences for predicting the complex chemistry in natural systems. Here we introduce the idea of kinetic confinement, which is intended to provide a conceptual backdrop for understanding when and why microdroplet reaction kinetics differ from their macroscale analogs.

Breaking down microdroplet chemistry

Charged microdroplets accelerate mineral disintegration.

Spontaneous weathering of natural minerals in charged water microdroplets forms nanomaterials

In this work, we show that particles of common minerals break down spontaneously to form nanoparticles in charged water microdroplets within milliseconds. We transformed micron-sized natural minerals like quartz and ruby into 5- to 10-nanometer particles when integrated into aqueous microdroplets generated via electrospray. We deposited the droplets on a substrate, which allowed nanoparticle characterization. We determined through simulations that quartz undergoes proton-induced slip, especially when reduced in size and exposed to an electric field. This leads to particle scission and the formation of silicate fragments, which we confirmed with mass spectrometry. This rapid weathering process may be important for soil formation, given the prevalence of charged aerosols in the atmosphere.

Predicting and Probing the Local Temperature Rise Around Plasmonic Core-Shell Nanoparticles to Study Thermally Activated Processes

Ultrafast spectroscopy can be used to study dynamic processes on femtosecond to nanosecond timescales, but is typically used for photoinduced processes. Several materials can induce ultrafast temperature rises upon absorption of femtosecond laser pulses, in principle allowing to study thermally activated processes, such as (catalytic) reactions, phase transitions, and conformational changes. Gold-silica core-shell nanoparticles are particularly interesting for this, as they can be used in a wide range of media and are chemically inert. Here we computationally model the temporal and spatial temperature profiles of gold nanoparticles with and without silica shell in liquid and gas media. Fast rises in temperature within tens of picoseconds are always observed. This is fast enough to study many of the aforementioned processes. We also validate our results experimentally using a poly(urethane-urea) exhibiting a temperature-dependent hydrogen bonding network, which shows local temperatures above 90 °C are reached on this timescale. Moreover, this experiment shows the hydrogen bond breaking in such polymers occurs within tens of picoseconds.

Inversion of Stabilized Large Droplet Clusters

We investigate the spontaneous rearrangement of microdroplets in a self-assembled droplet cluster levitating over a thin locally heated water layer. The center-to-periphery droplet diameter ratio (the "inversion coefficient") controls the onset of the inversion. Larger droplets can squeeze between smaller ones due to increased drag force on them from the air-vapor flow. In smaller clusters, the rotation of the droplets plays an important role since larger droplets rotating with the same angular velocity (dependent on the rotor of the airflow field) have higher viscous friction force with the liquid layer. It is desirable to avoid cluster inversion in experiments where individual droplet positions should be traced.

Accelerating protein aggregation and amyloid fibrillation for rapid inhibitor screening

The accumulation and deposition of amyloid fibrils, also known as amyloidosis, in tissues and organs of patients has been found to be linked to numerous devastating neurodegenerative diseases. The aggregation of proteins to form amyloid fibrils, however, is a slow pathogenic process, and is a major issue for the evaluation of the effectiveness of inhibitors in new drug discovery and screening. Here, we used microdroplet reaction technology to accelerate the amyloid fibrillation process, monitored the process to shed light on the fundamental mechanism of amyloid self-assembly, and demonstrated the value of the technology in the rapid screening of potential inhibitor drugs. Proteins in microdroplets accelerated to form fibrils in milliseconds, enabling an entire cycle of inhibitor screening for Aβ40 within 3 minutes. The technology would be of broad interest to drug discovery and therapeutic design to develop treatments for diseases associated with protein aggregation and fibrillation.

Femtoliter oil droplets act as CO2 micropumps for uninterrupted electrochemiluminescence at the water|oil interface

Interfacial effects are well-known to significantly alter chemical reactivity, especially in confined environments, where the surface to volume ratio increases. Here, we observed an inhomogeneity in the electrogenerated chemiluminescence (ECL) intensity decrease over time in a multiphasic system composed of femtoliter water droplets entrapping femtoliter volumes of the 1,2-dichloroethane (DCE) continuous phase. In usual electrochemiluminescence (ECL) reactions involving an ECL chromophore and oxalate ([C2O4]2-), the build-up of CO2 diminishes the ECL signal with time because of bubble formation. We hypothesised that relative solubilities of chemical species in these environments play a dramatic role in interfacial reactivity. Water droplets, loaded with the ECL luminophore [Ru(bpy)3]2+ and the coreactant [C2O4]2- were allowed to stochastically collide and adsorb at the surface of a glassy carbon macroelectrode. When water droplets coalesce on the surface, they leave behind femtoliter droplets of the DCE phase (inclusions). We report the surprising finding that the addition of multiple interfaces, due to the presence of continuous phase's femtoliter inclusions, allows sustained ECL over time after successive potential applications at the triple-phase boundary between water droplet|electrode|DCE inclusion. When femtoliter droplets of DCE form on the electrode surface, bright rings of ECL are observed during the simultaneous oxidation of [Ru(bpy)3]2+ and [C2O4]2-. Control experiments and finite element modelling allowed us to propose that these rings arise because CO2 that is generated near the 1,2-dichloroethane droplet partitions in due to relative solubility of CO2 in 1,2-dichloroethane and builds up and/or is expelled at the top of the droplet. The small droplets of the DCE phase act as micropumps, pumping away carbon dioxide from the interface. These results highlight the unexpected point that confined microenvironments and their geometry can tune chemical reactions of industrial importance and fundamental interest.

The role of charge in microdroplet redox chemistry

In charged water microdroplets, which occur in nature or in the lab upon ultrasonication or in electrospray processes, the thermodynamics for reactive chemistry can be dramatically altered relative to the bulk phase. Here, we provide a theoretical basis for the observation of accelerated chemistry by simulating water droplets of increasing charge imbalance to create redox agents such as hydroxyl and hydrogen radicals and solvated electrons. We compute the hydration enthalpy of OH- and H+ that controls the electron transfer process, and the corresponding changes in vertical ionization energy and vertical electron affinity of the ions, to create OH• and H• reactive species. We find that at ~ 20 - 50% of the Rayleigh limit of droplet charge the hydration enthalpy of both OH- and H+ have decreased by >50 kcal/mol such that electron transfer becomes thermodynamically favorable, in correspondence with the more favorable vertical electron affinity of H+ and the lowered vertical ionization energy of OH-. We provide scaling arguments that show that the nanoscale calculations and conclusions extend to the experimental microdroplet length scale. The relevance of the droplet charge for chemical reactivity is illustrated for the formation of H2O2, and has clear implications for other redox reactions observed to occur with enhanced rates in microdroplets.

Understanding the active role of water in laboratory chamber studies of reactions of the OH radical with alcohols of atmospheric relevance

In this work, we studied the reactions of three cyclic aliphatic alcohols with OH at room temperature, atmospheric pressure and different humidities in a Teflon reaction chamber. It was determined that the lower the solubility of the alcohol in water, the larger the effect of the humidity on the acceleration of the reaction. This experimental evidence allows suggesting that the acceleration is due to the reaction of the co-adsorbed reactants at the air-water interface of a thin water film deposited on the Teflon walls of the reaction chamber, instead of between co-reactants dissolved in the water film or due to gas phase catalysis as previously suggested. Therefore, formation of thin water films on different surfaces could have some implications on the tropospheric chemistry of these alcohols in the tropical regions of the planet with high humidity.

External Force Field for Protein Folding in Chaperonins-Potential Application in In Silico Protein Folding

The present study discusses the influence of the TRiC chaperonin involved in the folding of the component of reovirus mu1/σ3. The TRiC chaperone is treated as a provider of a specific external force field in the fuzzy oil drop model during the structural formation of a target folded protein. The model also determines the status of the final product, which represents the structure directed by an external force field in the form of a chaperonin. This can be used for in silico folding as the process is environment-dependent. The application of the model enables the quantitative assessment of the folding dependence of an external force field, which appears to have universal application.

Spontaneous Oxidation in Aqueous Microdroplets: Water Radical Cation as Primary Oxidizing Agent

Exploration of the unique chemical properties of interfaces can unlock new understanding. A striking example is the finding of accelerated reactions, particularly spontaneous oxidation reactions, that occur without assistance of catalysts or external oxidants at the air interface of both aqueous and organic solutions (provided they contain some water). This finding opened a new area of interfacial chemistry but also caused heated debate regarding the primary chemical species responsible for the observed oxidation. An overview of the literature covering oxidation in microdroplets with air interfaces is provided, together with a critical examination of previous findings and hypotheses. The water radical cation/radical anion pair, formed spontaneously and responsible for the electric field at or near the droplet/air interface, is suggested to constitute the primary redox species. Mechanisms of accelerated microdroplet reactions are critically discussed and it is shown that hydroxyl radical/hydrogen peroxide formation in microdroplets does not require that these species be the primary oxidant. Instead, we suggest that hydroxyl radical and hydrogen peroxide are the products of water radical cation decay in water. The importance of microdroplet chemistry in the prebiotic environment is sketched briefly and the role of partial solvation in reaction acceleration is noted.

Designer "Quasi-Benzyne": The Spontaneous Reduction of Ortho-Diiodotetrafluorobenzene on Water Microdroplets

It has been widely shown that water microdroplets have a plethora of unique properties that are highly distinct from those of bulk water, among which an especially intriguing one is the strong reducing power as a result of the electrons spontaneously generated at the air-water interface. In this study, we take advantage of the reducing power of water microdroplets to reduce ortho-diiodotetrafluorobenzene (o-C6F4I2) into a C6F4I2•- radical anion. Photoelectron spectroscopy and density functional theory computations reveal that the excess electron in C6F4I2•- occupies the I-C1-C2-I linkage, which elongates the C-I bonds but surprisingly shortens the C1-C2 bond, making the bond order higher than a double bond, similar to the benzyne molecule, so we named it "quasi-benzyne". The C6F4I2•- anion was further successfully utilized in a Diels-Alder reaction, a typical reaction for benzyne. This study provides a good example of strategically utilizing the spontaneous properties of water microdroplets and generating an especially exotic anion, and we anticipate that microdroplet chemistry can be an avenue rich in opportunities for new catalyst-free organic reactions.

Deciphering the Microdroplet Acceleration Factors of Aza-Michael Addition Reactions

Microdroplet chemistry is emerging as a great tool for accelerating reactions by several orders of magnitude. Several unique properties such as extreme pHs, interfacial electric fields (IEFs), and partial solvation have been reported to be responsible for the acceleration; however, which factor plays the key role remains elusive. Here, we performed quantum chemical calculations to explore the underlying mechanisms of an aza-Michael addition reaction between methylamine and acrylamide. We showed that the acceleration in methanol microdroplets results from the cumulative effects of several factors. The acidic surface of the microdroplet plays a dominating role, leading to a decrease of ∼9 kcal/mol in the activation barrier. We speculated that the dissociation of both methanol and trace water contributes to the surface acidity. An IEF of 0.1 V/Å can further decrease the barrier by ∼2 kcal/mol. Partial solvation has a negligible effect on lowering the activation barrier in microdroplets but can increase the collision frequency between reactants. With acidity revealed to be the major accelerating factor for methanol droplets, reactions on water microdroplets should have even higher rates because water is more acidic. Both theoretically and experimentally, we confirmed that water microdroplets significantly accelerate the aza-Michael reaction, achieving an acceleration factor that exceeds 107. This work elucidates the multifactorial influences on the microdroplet acceleration mechanism, and with such detailed mechanistic investigations, we anticipate that microdroplet chemistry will be an avenue rich in opportunities in the realm of green synthesis.

Spontaneous Degradation of the "Forever Chemicals" Perfluoroalkyl and Polyfluoroalkyl Substances (PFASs) on Water Droplet Surfaces

Because of their innate chemical stability, the ubiquitous perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been dubbed "forever chemicals" and have attracted considerable attention. However, their stability under environmental conditions has not been widely verified. Herein, perfluorooctanoic acid (PFOA), a widely used and detected PFAS, was found to be spontaneously degraded in aqueous microdroplets under room temperature and atmospheric pressure conditions. This unexpected fast degradation occurred via a unique multicycle redox reaction of PFOA with interfacial reactive species on the droplet surface. Similar degradation was observed for other PFASs. This study extends the current understanding of the environmental fate and chemistry of PFASs and provides insight into aid in the development of effective methods for removing PFASs.

Quantification and Mechanistic Investigation of the Spontaneous H2O2 Generation at the Interfaces of Salt-Containing Aqueous Droplets

There is now much evidence that OH radicals and H2O2 are spontaneously generated at the air-water interface of atmospheric aerosols. Here, we investigated the effect of halide anions (Cl-, Br-, I-), which are abundant in marine aerosols, on this H2O2 production. Droplets were generated via nebulization of water solutions containing Na2SO4, NaCl, NaBr, and NaI containing solutions, and H2O2 was monitored as a function of the salt concentration under atmospheric relevant conditions. The interfacial OH radical formation was also investigated by adding terephthalic acid (TA) to our salt solutions, and the product of its reaction with OH, hydroxy terephthalic acid (TAOH), was monitored. Finally, a mechanistic investigation was performed to examine the reactions participating in H2O2 production, and their respective contributions were quantified. Our results showed that only Br- contributes to the interfacial H2O2 formation, promoting the production by acting as an electron donor, while Na2SO4 and NaCl stabilized the droplets by only reducing their evaporation. TAOH was observed in the collected droplets and, for the first time, directly in the particle phase by means of online fluorescence spectroscopy, confirming the interfacial OH production. A mechanistic study suggests that H2O2 is formed by both OH and HO2 self-recombination, as well as HO2 reaction with H atoms. This work is expected to enhance our understanding of interfacial processes and assess their impact on climate, air quality, and health.

Molecular Mechanism for Converting Carbon Dioxide Surrounding Water Microdroplets Containing 1,2,3-Triazole to Formic Acid

Spraying water microdroplets containing 1,2,3-triazole (Tz) has been found to effectively convert gas-phase carbon dioxide (CO2), but not predissolved CO2, into formic acid (FA). Herein, we elucidate the reaction mechanism at the molecular level through quantum chemistry calculations and ab initio molecular dynamics (AIMD) simulations. Computations suggest a multistep reaction mechanism that initiates from the adsorption of CO2 by Tz to form a CO2-Tz complex (named reactant complex (RC)). Then, the RC either is reduced by electrons that were generated at the air-liquid interface of the water microdroplet and then undergoes intramolecular proton transfer (PT) or switches the reduction and PT steps to form a [HCO2-(Tz-H)]- complex (named PC-). Subsequently, PC- undergoes reduction and the C-N bond dissociates to generate COOH- and [Tz-H]- (m/z = 69). COOH- easily converts to HCOOH and is captured at m/z = 45 in mass spectroscopy. Notably, the intramolecular PT step can be significantly lowered by the oriented electric field at the interface and a water-bridge mechanism. The mechanism is further confirmed by testing multiple azoles. The AIMD simulations reveal a novel proton transfer mechanism where water serves as a transporter and is shown to play an important role dynamically. Moreover, the transient •COOH captured by the experiment is proposed to be partly formed by the reaction with H•, pointing again to the importance of the air-water interface. This work provides valuable insight into the important mechanistic, kinetic, and dynamic features of converting gas-phase CO2 to valuable products by azoles or amines dissolved in water microdroplets.

Significantly Accelerated Photosensitized Formation of Atmospheric Sulfate at the Air-Water Interface of Microdroplets

The multiphase oxidation of sulfur dioxide (SO2) to form sulfate is a complex and important process in the atmosphere. While the conventional photosensitized reaction mainly explored in the bulk medium is reported to be one of the drivers to trigger atmospheric sulfate production, how this scheme functionalizes at the air-water interface (AWI) of aerosol remains an open question. Herein, employing an advanced size-controllable microdroplet-printing device, surface-enhanced Raman scattering (SERS) analysis, nanosecond transient adsorption spectrometer, and molecular level theoretical calculations, we revealed the previously overlooked interfacial role in photosensitized oxidation of SO2 in humic-like substance (HULIS) aerosol, where a 3-4 orders of magnitude increase in sulfate formation rate was speculated in cloud and aerosol relevant-sized particles relative to the conventional bulk-phase medium. The rapid formation of a battery of reactive oxygen species (ROS) comes from the accelerated electron transfer process at the AWI, where the excited triplet state of HULIS (3HULIS*) of the incomplete solvent cage can readily capture electrons from HSO3- in a way that is more efficient than that in the bulk medium fully blocked by water molecules. This phenomenon could be explained by the significantly reduced desolvation energy barrier required for reagents residing in the AWI region with an open solvent shell.

The power of microdroplet photochemistry

This study presents compelling evidence demonstrating that irradiation of the air-solution interface, whether achieved through the spraying of microdroplets into the air or by bubbling air through a solution, significantly accelerates the rate of photochemical reactions by orders of magnitude compared to identical reaction conditions in bulk solutions. We propose this approach as a novel and versatile method for harnessing solar energy in chemical transformations.

The emerging chemistry of self-electrified water interfaces

Water is known for dissipating electrostatic charges, but it is also a universal agent of matter electrification, creating charged domains in any material contacting or containing it. This new role of water was discovered during the current century. It is proven in a fast-growing number of publications reporting direct experimental measurements of excess charge and electric potential. It is indirectly verified by its success in explaining surprising phenomena in chemical synthesis, electric power generation, metastability, and phase transition kinetics. Additionally, electrification by water is opening the way for developing green technologies that are fully compatible with the environment and have great potential to contribute to sustainability. Electrification by water shows that polyphasic matter is a charge mosaic, converging with the Maxwell-Wagner-Sillars effect, which was discovered one century ago but is still often ignored. Electrified sites in a real system are niches showing various local electrochemical potentials for the charged species. Thus, the electrified mosaics display variable chemical reactivity and mass transfer patterns. Water contributes to interfacial electrification from its singular structural, electric, mixing, adsorption, and absorption properties. A long list of previously unexpected consequences of interfacial electrification includes: "on-water" reactions of chemicals dispersed in water that defy current chemical wisdom; reactions in electrified water microdroplets that do not occur in bulk water, transforming the droplets in microreactors; and lowered surface tension of water, modifying wetting, spreading, adhesion, cohesion, and other properties of matter. Asymmetric capacitors charged by moisture and water are now promising alternative equipment for simultaneously producing electric power and green hydrogen, requiring only ambient thermal energy. Changing surface tension by interfacial electrification also modifies phase-change kinetics, eliminating metastability that is the root of catastrophic electric discharges and destructive explosions. It also changes crystal habits, producing needles and dendrites that shorten battery life. These recent findings derive from a single factor, water's ability to electrify matter, touching on the most relevant aspects of chemistry. They create tremendous scientific opportunities to understand the matter better, and a new chemistry based on electrified interfaces is now emerging.

Interfacial chemical reactivity enhancement

Interfacial enhancements of chemical reaction equilibria and rates in liquid droplets are predicted using a combined theoretical and experimental analysis strategy. Self-consistent solutions of reaction and adsorption equilibria indicate that interfacial reactivity enhancement is driven primarily by the adsorption free energy of the product (or activated complex). Reactant surface activity has a smaller indirect influence on reactivity due to compensating reactant interfacial concentration and adsorption free energy changes, as well as adsorption-induced depletion of the droplet core. Experimental air-water interfacial adsorption free energies and critical micelle concentration correlations provide quantitative surface activity estimates as a function of molecular structure, predicting an increase in interfacial reactivity with increasing product size and decreasing product polarity, aromaticity, and charge (but less so for anions than cations). Reactions with small, neutral, or charged products are predicted to have little reactivity enhancement at an air-water interface unless the product is rendered sufficiently surface active by, for example, interactions with interfacial water dangling OH groups, charge transfer, or voltage fluctuations.

Identification of the Electrogenerated Hidden Nitrenium Ions by In Situ Mass Spectrometry

The identification of the electrogenerated reactive intermediates is essential for an in-depth understanding of the electroredox processes. Although various short-lived intermediates are well characterized by coupling electrochemistry with mass spectrometry (EC/MS), many electrogenerated transient species (τ < 1 μs) are still rarely captured by the currently available EC/MS approaches. Here, we present a low-delay coupling device, which was constructed by decorating a microelectrode into the front tip of a microsized ion emitter. For the first time, the in situ detection of a previously hidden intermediate, i.e., the transient nitrenium ion of carbazole (τ = 333 ns), was achieved. The electrochemical generation of indole nitrenium ion, whose half-life is estimated to be shorter compared to the carbazole nitrenium ion due to less resonance stabilization, was also confirmed by direct observation. This clog-free microelectrode/ion emitter is cheap and easy to fabricate and offers a general and powerful approach to monitoring the fast reactions of electrogenerated reactive intermediates. We believe that our integrated EC/MS approach holds substantial potential for broad applicability, particularly in probing the intricate and ultrafast electroredox processes occurring at the electrode-solution interface.

Light-Responsive Materials in Droplet Manipulation for Biochemical Applications

Miniaturized droplets, characterized by well-controlled microenvironments and capability for parallel processing, have significantly advanced the studies on enzymatic evolution, molecular diagnostics, and single-cell analysis. However, manipulation of small-sized droplets, including moving, merging, and trapping of the targeted droplets for complex biochemical assays and subsequent analysis, is not trivial and remains technically demanding. Among various techniques, light-driven methods stand out as a promising candidate for droplet manipulation in a facile and flexible manner, given the features of contactless interaction, high spatiotemporal resolution, and biocompatibility. This review therefore compiles an in-depth discussion of the governing mechanisms underpinning light-driven droplet manipulation. Besides, light-responsive materials, representing the core of light-matter interaction and the key character converting light into different forms of energy, are particularly assessed in this review. Recent advancements in light-responsive materials and the most notable applications are comprehensively archived and evaluated. Continuous innovations and rational engineering of light-responsive materials are expected to propel the development of light-driven droplet manipulation, equip droplets with enhanced functionality, and broaden the applications of droplets for biochemical studies and routine biochemical investigations.

Chemical Micromotors Move Faster at Oil-Water Interfaces

Many real-world scenarios involve interfaces, particularly liquid-liquid interfaces, that can fundamentally alter the dynamics of colloids. This is poorly understood for chemically active colloids that release chemicals into their environment. We report here the surprising discovery that chemical micromotors─colloids that convert chemical fuels into self-propulsion─move significantly faster at an oil-water interface than on a glass substrate. Typical speed increases ranged from 3 to 6 times up to an order of magnitude and were observed for different types of chemical motors and interfaces made with different oils. Such speed increases are likely caused by faster chemical reactions at an oil-water interface than at a glass-water interface, but the exact mechanism remains unknown. Our results provide valuable insights into the complex interactions between chemical micromotors and their environments, which are important for applications in the human body or in the removal of organic pollutants from water. In addition, this study also suggests that chemical reactions occur faster at an oil-water interface and that micromotors can serve as a probe for such an effect.

Reactivity of Monoethanolamine at the Air-Water Interface and Implications for CO2 Capture

The development of CO2-capture technologies is key to mitigating climate change due to anthropogenic greenhouse gas emissions. These cover a number of technologies designed to reduce the level of CO2 emitted into the atmosphere or to eliminate CO2 from ambient air. In this context, amine-based sorbents in aqueous solutions are broadly used in most advanced separation techniques currently implemented in industrial applications. It has been reported that the gas/liquid interface plays an important role in the early stages of the capture process, but how the interface influences the chemistry is still a matter of debate. With the help of first-principles molecular dynamics simulations, we show that monoethanolamine (MEA), a prototypical sorbent molecule, has a weak affinity for the air-water interface, where in addition it exhibits a lower nucleophilicity compared to bulk solution. The change in reactivity is due to the combination of structural and electronic factors, namely, the shift of the conformational equilibrium and the stabilization of the N-atom lone pair. Based on these results, strategies for improving the efficiency of alkanolamine sorbents are proposed.

Special Issue with Research Topics on "Recent Analysis and Applications of Mass Spectra on Biochemistry"

Analytical mass spectrometry applies irreplaceable mass spectrometric (MS) methods to analytical chemistry and chemical analysis, among other areas of analytical science [...].

Spiers Memorial Lecture: Water at interfaces

In this article we discuss current issues in the context of the four chosen subtopics for the meeting: dynamics and nano-rheology of interfacial water, electrified/charged aqueous interfaces, ice interfaces, and soft matter/water interfaces. We emphasize current advances in both theory and experiment, as well as important practical manifestations and areas of unresolved controversy.

Levitating Droplet Electroanalysis

Chemical reactions that occur in droplets proceed much differently compared to bulk phases. For instance, many groups have studied droplets during levitation by mass spectrometry and fluorescence to gain more detailed mechanistic insight. Such droplets maximize the probability of solution species interacting with the solution-air interface, an interface that is inherently difficult to probe electrochemically. In this Technical Note, we overcome this limitation by developing a laser-pulled dual-barrel electrode. Having two microwires sealed within the same glass capillary allows one to make two-electrode measurements. We show that the electrode can be positioned within a levitating water droplet and that the voltammetry of a redox indicator (hexacyanoferrate (II/III)) can be observed in real-time. Such foundational measurement tools are important to probe a variety of chemical reactions at complex interfaces.