Force-induced focal adhesion translocation: effects of force amplitude and frequency

Mechanobiological conceptual framework for assessing stem cell bioprocess effectiveness

Fully realizing the enormous potential of stem cells requires developing efficient bioprocesses and optimizations founded in mechanobiological considerations. Here, we emphasize the importance of mechanotransduction as one of the governing principles of stem cell bioprocesses, underscoring the need to further explore the behavioral mechanisms involved in sensing mechanical cues and coordinating transcriptional responses. We identify the sources of intrinsic, extrinsic, and external noise in bioprocesses requiring further study, and discuss the criteria and indicators that may be used to assess and predict cell-to-cell variability resulting from environmental fluctuations. Specifically, we propose a conceptual framework to explain the impact of mechanical forces within the cellular environment, identify key cell state determinants in bioprocesses, and discuss downstream implementation challenges.

The biochemical composition of the actomyosin network sets the magnitude of cellular traction forces

The regulation of cellular force production relies on the complex interplay between a well-conserved set of proteins of the cytoskeleton: actin, myosin, and α-actinin. Despite our deep knowledge of the role of these proteins in force production at the molecular scale, our understanding of the biochemical regulation of the magnitude of traction forces generated at the entire-cell level has been limited, notably by the technical challenge of measuring traction forces and the endogenous biochemical composition in the same cell. In this study, we developed an alternative Traction-Force Microscopy (TFM) assay, which used a combination of hydrogel micropatterning to define cell adhesion and shape and an intermediate fixation/immunolabeling step to characterize strain energies and the endogenous protein contents in single epithelial cells. Our results demonstrated that both the signal intensity and the area of the Focal Adhesion (FA)–associated protein vinculin showed a strong positive correlation with strain energy in mature FAs. Individual contents from actin filament and phospho-myosin displayed broader deviation in their linear relationship to strain energies. Instead, our quantitative analyzes demonstrated that their relative amount exhibited an optimum ratio of phospho-myosin to actin, allowing maximum force production by cells. By contrast, although no correlation was identified between individual α-actinin content and strain energy, the ratio of α-actinin to actin filaments was inversely related to strain energy. Hence, our results suggest that, in the cellular model studied, traction-force magnitude is dictated by the relative numbers of molecular motors and cross-linkers per actin filament, rather than the amounts of an individual component in the cytoskeletal network. This assay offers new perspectives to study in more detail the complex interplay between the endogenous biochemical composition of individual cells and the force they produce.

Large magnitude of force leads to NO-mediated cell shrinkage in single osteocytes implying an initial apoptotic response

Damage accumulation in the bone under continuous daily loading causes local mechanical overloading known to induce osteocyte apoptosis, which promotes bone resorption to repair bone damage. However, only a few studies have investigated the mechanism of apoptosis in mechanically overloaded osteocytes. As mechanically stimulated osteocytes produce nitric oxide (NO), which triggers apoptosis in various cell types, we aimed to elucidate the mechanism underlying apoptosis in mechanically overloaded osteocytes, focusing on intracellular NO. To investigate the effects of force magnitude on apoptosis and intracellular NO production, we isolated osteocytes from DMP1-EGFP mice and subjected them to quantitative local forces via fibronectin-coated micro beads targeting integrin on the cell surface using a magnetic tweezer. Cell shrinkage was microscopically examined, and intracellular NO production was visualized using DAR-4 M. Mechanical stimulation revealed relationships between force magnitude, apoptosis, and intracellular NO production. The application of a smaller force resulted in no significant cell shrinkage or intracellular NO production; however, a larger force caused a rapid increase in intracellular NO production followed by cell shrinkage. Besides, intracellular NOS (NO synthase) inhibition and NO donation revealed the pro-apoptotic roles of NO in osteocytes. L-NAME (NOS inhibitor)-treated cells displayed no significant shrinkage under a larger force, whereas SNP (NO donor)-treated cells showed cell shrinkage and Annexin V fluorescence, indicating apoptosis. Collectively, our study demonstrates that larger force leads to NO production-mediated osteocyte shrinkage, implying an initial apoptotic response and highlighting the importance of NO production in bone damage.

Nonlinear Elastic and Inelastic Properties of Cells

Mechanical forces play an important role in various physiological processes, such as morphogenesis, cytokinesis, and migration. Thus, in order to illuminate mechanisms underlying these physiological processes, it is crucial to understand how cells deform and respond to external mechanical stimuli. During recent decades, the mechanical properties of cells have been studied extensively using diverse measurement techniques. A number of experimental studies have shown that cells are far from linear elastic materials. Cells exhibit a wide variety of nonlinear elastic and inelastic properties. Such complicated properties of cells are known to emerge from unique mechanical characteristics of cellular components. In this review, we introduce major cellular components that largely govern cell mechanical properties and provide brief explanations of several experimental techniques used for rheological measurements of cell mechanics. Then, we discuss the representative nonlinear elastic and inelastic properties of cells. Finally, continuum and discrete computational models of cell mechanics, which model both nonlinear elastic and inelastic properties of cells, will be described.

Mechanobiology of annulus fibrosus and nucleus pulposus cells in intervertebral discs

Low back pain (LBP) is a chronic condition that can affect up to 80% of the global population. It is the number one cause of disability worldwide and has enormous socioeconomic consequences. One of the main causes of this condition is intervertebral disc (IVD) degeneration. IVD degenerative processes and inflammation associated with it has been the subject of many studies in both tissue and cell level. It is believed that the phenotype of the resident cells within the IVD directly affects homeostasis of the tissue. At the same time, IVDs located between vertebral bodies of spine are under various mechanical loading conditions in vivo. Therefore, investigating how mechanical loading can affect the behaviour of IVD cells has been a subject of many research articles. In this review paper, following a brief explanation of the anatomy of the IVD and its resident cells, we compiled mechanobiological studies of IVD cells (specifically, annulus fibrosus and nucleus pulposus cells) and synthesized and discussed the key findings of the field.

Modeling cardiac complexity: Advancements in myocardial models and analytical techniques for physiological investigation and therapeutic development in vitro

Cardiomyopathies, heart failure, and arrhythmias or conduction blockages impact millions of patients worldwide and are associated with marked increases in sudden cardiac death, decline in the quality of life, and the induction of secondary pathologies. These pathologies stem from dysfunction in the contractile or conductive properties of the cardiomyocyte, which as a result is a focus of fundamental investigation, drug discovery and therapeutic development, and tissue engineering. All of these foci require in vitro myocardial models and experimental techniques to probe the physiological functions of the cardiomyocyte. In this review, we provide a detailed exploration of different cell models, disease modeling strategies, and tissue constructs used from basic to translational research. Furthermore, we highlight recent advancements in imaging, electrophysiology, metabolic measurements, and mechanical and contractile characterization modalities that are advancing our understanding of cardiomyocyte physiology. With this review, we aim to both provide a biological framework for engineers contributing to the field and demonstrate the technical basis and limitations underlying physiological measurement modalities for biologists attempting to take advantage of these state-of-the-art techniques.

Control of cell behaviour through nanovibrational stimulation: nanokicking

Mechanical signals are ubiquitous in our everyday life and the process of converting these mechanical signals into a biological signalling response is known as mechanotransduction. Our understanding of mechanotransduction, and its contribution to vital cellular responses, is a rapidly expanding field of research involving complex processes that are still not clearly understood. The use of mechanical vibration as a stimulus of mechanotransduction, including variation of frequency and amplitude, allows an alternative method to control specific cell behaviour without chemical stimulation (e.g. growth factors). Chemical-independent control of cell behaviour could be highly advantageous for fields including drug discovery and clinical tissue engineering. In this review, a novel technique is described based on nanoscale sinusoidal vibration. Using finite-element analysis in conjunction with laser interferometry, techniques that are used within the field of gravitational wave detection, optimization of apparatus design and calibration of vibration application have been performed. We further discuss the application of nanovibrational stimulation, or 'nanokicking', to eukaryotic and prokaryotic cells including the differentiation of mesenchymal stem cells towards an osteoblast cell lineage. Mechanotransductive mechanisms are discussed including mediation through the Rho-A kinase signalling pathway. Optimization of this technique was first performed in two-dimensional culture using a simple vibration platform with an optimal frequency and amplitude of 1 kHz and 22 nm. A novel bioreactor was developed to scale up cell production, with recent research demonstrating that mesenchymal stem cell differentiation can be efficiently triggered in soft gel constructs. This important step provides first evidence that clinically relevant (three-dimensional) volumes of osteoblasts can be produced for the purpose of bone grafting, without complex scaffolds and/or chemical induction. Initial findings have shown that nanovibrational stimulation can also reduce biofilm formation in a number of clinically relevant bacteria. This demonstrates additional utility of the bioreactor to investigate mechanotransduction in other fields of research.This article is part of a discussion meeting issue 'The promises of gravitational-wave astronomy'.

Mapping cell surface adhesion by rotation tracking and adhesion footprinting

Rolling adhesion, in which cells passively roll along surfaces under shear flow, is a critical process involved in inflammatory responses and cancer metastasis. Surface adhesion properties regulated by adhesion receptors and membrane tethers are critical in understanding cell rolling behavior. Locally, adhesion molecules are distributed at the tips of membrane tethers. However, how functional adhesion properties are globally distributed on the individual cell’s surface is unknown. Here, we developed a label-free technique to determine the spatial distribution of adhesive properties on rolling cell surfaces. Using dark-field imaging and particle tracking, we extract the rotational motion of individual rolling cells. The rotational information allows us to construct an adhesion map along the contact circumference of a single cell. To complement this approach, we also developed a fluorescent adhesion footprint assay to record the molecular adhesion events from cell rolling. Applying the combination of the two methods on human promyelocytic leukemia cells, our results surprisingly reveal that adhesion is non-uniformly distributed in patches on the cell surfaces. Our label-free adhesion mapping methods are applicable to the variety of cell types that undergo rolling adhesion and provide a quantitative picture of cell surface adhesion at the functional and molecular level.

Bio-Nano-Magnetic Materials for Localized Mechanochemical Stimulation of Cell Growth and Death

Magnetic nanoparticles are promising new tools for therapeutic applications, such as magnetic nanoparticle hyperthermia therapy and targeted drug delivery. Recent in vitro studies have demonstrated that a force application with magnetic tweezers can also affect cell fate, suggesting a therapeutic potential for magnetically modulated mechanical stimulation. The magnetic properties of nanoparticles that induce physical responses and the subtle responses that result from mechanically induced membrane damage and/or intracellular signaling are evaluated. Magnetic particles with various physical, geometric, and magnetic properties and specific functionalization can now be used to apply mechanical force to specific regions of cells, which permit the modulation of cellular behavior through the use of spatially and time controlled magnetic fields. On one hand, mechanochemical stimulation has been used to direct the outgrowth on neuronal growth cones, indicating a therapeutic potential for neural repair. On the other hand, it has been used to kill cancer cells that preferentially express specific receptors. Advances made in the synthesis and characterization of magnetic nanomaterials and a better understanding of cellular mechanotransduction mechanisms may support the translation of mechanochemical stimulation into the clinic as an emerging therapeutic approach.

Microfluidics meets metabolomics to reveal the impact of Campylobacter jejuni infection on biochemical pathways

Microfluidic devices that are currently being used in pharmaceutical research also have a significant potential for utilization in investigating exposure to infectious agents. We have established a microfluidic device cultured with Caco-2 cells, and utilized metabolomics to investigate the biochemical responses to the bacterial pathogen Campylobacter jejuni. In the microfluidic devices, Caco-2 cells polarize at day 5, are uniform, have defined brush borders and tight junctions, and form a mucus layer. Metabolomics analysis of cell culture media collected from both Caco-2 cell culture systems demonstrated a more metabolic homogenous biochemical profile in the media collected from microfluidic devices, compared with media collected from transwells. GeneGo pathway mapping indicated that aminoacyl-tRNA biosynthesis was perturbed by fluid flow, suggesting that fluid dynamics and shear stress impacts the cells translational quality control. Both microfluidic device and transwell culturing systems were used to investigate the impact of Campylobacter jejuni infection on biochemical processes. Caco-2 cells cultured in either system were infected at day 5 with C. jejuni 81-176 for 48 h. Metabolomics analysis clearly differentiated C. jejuni 81-176 infected and non-infected medias collected from the microfluidic devices, and demonstrated that C. jejuni 81-176 infection in microfluidic devices impacts branched-chain amino acid metabolism, glycolysis, and gluconeogenesis. In contrast, no distinction was seen in the biochemical profiles of infected versus non-infected media collected from cells cultured in transwells. Microfluidic culturing conditions demonstrated a more metabolically homogenous cell population, and present the opportunity for studying host-pathogen interactions for extended periods of time.

Single cell metastatic phenotyping using pulsed nanomechanical indentations

The existing approach to characterize cell biomechanical properties typically utilizes switch-like models of mechanotransduction in which cell responses are analyzed in response to a single nanomechanical indentation or a transient pulsed stress. Although this approach provides effective descriptors at population-level, at a single-cell-level, there are significant overlaps in the biomechanical descriptors of non-metastatic and metastatic cells which precludes the use of biomechanical markers for single cell metastatic phenotyping. This study presents a new promising marker for biosensing metastatic and non-metastatic cells at a single-cell-level using the effects of a dynamic microenvironment on the biomechanical properties of cells. Two non-metastatic and two metastatic epithelial breast cell lines are subjected to a pulsed stresses regimen exerted by atomic force microscopy. The force-time data obtained for the cells revealed that the non-metastatic cells increase their resistance against deformation and become more stiffened when subjected to a series of nanomechanical indentations. On the other hand, metastatic cells become slightly softened when their mechanical microenvironment is subjected to a similar dynamical changes. This distinct behavior of the non-metastatic and metastatic cells to the pulsed stresses paradigm provided a signature for single-cell-level metastatic phenotyping with a high confidence level of ∼95%.

Substrate stiffness regulates cellular uptake of nanoparticles

Nanoparticle (NP)-bioconjugates hold great promise for more sensitive disease diagnosis and more effective anticancer drug delivery compared with existing approaches. A critical aspect in both applications is cellular internalization of NPs, which is influenced by NP properties and cell surface mechanics. Despite considerable progress in optimization of the NP-bioconjugates for improved targeting, the role of substrate stiffness on cellular uptake has not been investigated. Using polyacrylamide (PA) hydrogels as model substrates with tunable stiffness, we quantified the relationship between substrate stiffness and cellular uptake of fluorescent NPs by bovine aortic endothelial cells (BAECs). We found that a stiffer substrate results in a higher total cellular uptake on a per cell basis, but a lower uptake per unit membrane area. To obtain a mechanistic understanding of the cellular uptake behavior, we developed a thermodynamic model that predicts that membrane spreading area and cell membrane tension are two key factors controlling cellular uptake of NPs, both of which are modulated by substrate stiffness. Our experimental and modeling results not only open up new avenues for engineering NP-based cancer cell targets for more effective in vivo delivery but also contribute an example of how the physical environment dictates cellular behavior and function.

Effects of green tea polyphenols on iodide-induced autoimmune thyroiditis in nonobese diabetic mice

Because green tea polyphenols (GTPs) possess anti-inflammatory properties and are effective in inhibiting autoimmune diseases in experimental settings, we examined whether GTPs prevented the development of autoimmune thyroiditis in iodide-treated nonobese diabetic (NOD) mice, an animal model of Hashimoto's thyroiditis (HT). Mice were given 0.05% iodide water or iodide water supplemented with 0.2% GTPs for 8 weeks. GTPs administration led to an enhanced production of interleukin-10 by concanavalin A-stimulated splenocytes but did not interfere with thyroiditis development. Serum thyroxine levels were not influenced by GTPs. Our data suggest that administration of GTPs may not be an effective strategy for the prevention of HT.

Mechanism of a flow-gated angiogenesis switch: early signaling events at cell-matrix and cell-cell junctions

A bias towards angiogenesis from the venous circulation has long been known, but its cause remains unclear. Here we explore the possibility that high interstitial pressure in tumors and the resultant net filtration pressure gradient that would induce flow from the interstitium into the venous circulation or lymphatics could also be an important mechanical regulator of angiogenesis. The objective of this study was to test the hypothesis that basal-to-apical (B-A) transendothelial flow promotes angiogenesis and to investigate potential mechanisms. Macro- and microvascular endothelial monolayers were cultured on type I collagen gels in a microfluidic cell culture device and subjected to apical-to-basal (A-B) and B-A transendothelial flows. Samples were perfusion fixed and analyzed for morphological responses, localization and degree of phosphorylation of certain signaling proteins. Application of B-A, but not A-B flow, to cultured endothelial monolayers was found to promote capillary morphogenesis and resulted in distinct localization patterns of VE-cadherin and increased FAK phosphorylation. These results suggest that B-A flow triggers the transition of vascular endothelial cells from a quiescent to invasive phenotype and that the flow-mediated response involves signaling at cell-cell and cell-matrix interfaces. These results support the hypothesis that transendothelial pressure gradients resulting in B-A flow promotes sprouting angiogenesis and are consistent with early observations that tumor angiogenesis occurs from the venous side of the circulation.

Dynamic molecular processes mediate cellular mechanotransduction

Cellular responses to mechanical forces are crucial in embryonic development and adult physiology, and are involved in numerous diseases, including atherosclerosis, hypertension, osteoporosis, muscular dystrophy, myopathies and cancer. These responses are mediated by load-bearing subcellular structures, such as the plasma membrane, cell-adhesion complexes and the cytoskeleton. Recent work has demonstrated that these structures are dynamic, undergoing assembly, disassembly and movement, even when ostensibly stable. An emerging insight is that transduction of forces into biochemical signals occurs within the context of these processes. This framework helps to explain how forces of varying strengths or dynamic characteristics regulate distinct signalling pathways.

Focal adhesion kinase regulation of mechanotransduction and its impact on endothelial cell functions

Vascular endothelial cells lining the blood vessels form the interface between the bloodstream and the vessel wall and as such they are continuously subjected to shear and cyclic stress from the flowing blood in the lumen. Additional mechanical stimuli are also imposed on these cells in the form of substrate stiffness transmitted from the extracellular matrix components in the basement membrane, and additional mechanical loads imposed on the lung endothelium as the result of respiration or mechanical ventilation in clinical settings. Focal adhesions (FAs) are complex structures assembled at the abluminal endothelial plasma membrane which connect the extracellular filamentous meshwork to the intracellular cytoskeleton and hence constitute the ideal checkpoint capable of controlling or mediating transduction of bidirectional mechanical signals. In this review we focus on focal adhesion kinase (FAK), a component of FAs, which has been studied for a number of years with regards to its involvement in mechanotransduction. We analyzed the recent advances in the understanding of the role of FAK in the signaling cascade(s) initiated by various mechanical stimuli with particular emphasis on potential implications on endothelial cell functions.

Alveolar type II cells escape stress failure caused by tonic stretch through transient focal adhesion disassembly

Mechanical ventilation-induced excessive stretch of alveoli is reported to induce cellular stress failure and subsequent lung injury, and is therefore an injurious factor to the lung. Avoiding cellular stress failure is crucial to ventilator-induced lung injury (VILI) treatment. In the present study, primary rat alveolar type II (ATII) cells were isolated to evaluate their viability and the mechanism of their survival under tonic stretch. By the annexin V/ PI staining and flow cytometry assay, we demonstrated that tonic stretch-induced cell death is an immediate injury of mechanical stress. In addition, immunofluorescence and immunoblots assay showed that the cells experienced an expansion-contraction-reexpansion process, accompanied by partial focal adhesion (FA) disassembly during contraction. Manipulation of integrin adherent affinity by altering bivalent cation levels in the culture medium and applying an integrin neutralizing antibody showed that facilitated adhesion affinity promoted cell death under tonic stretch, while lower level of adhesion protected the cells from stretch-induced stress failure. Finally, a simplified numerical model was established to reveal that adequate disassembly of FAs reduced the forces transmitting throughout the cell. Taken together, these results indicate that ATII cells escape stress failure caused by tonic stretch via active cell morphological remodeling, during which cells transiently disassemble FAs to unload mechanical forces.

Focal adhesions in osteoneogenesis

As materials technology and the field of tissue engineering advance, the role of cellular adhesive mechanisms, in particular, interactions with implantable devices, becomes more relevant in both research and clinical practice. A key tenet of medical device technology is to use the exquisite ability of biological systems to respond to the material surface or chemical stimuli in order to help to develop next-generation biomaterials. The focus of this review is on recent studies and developments concerning focal adhesion formation in osteoneogenesis, with an emphasis on the influence of synthetic constructs on integrin-mediated cellular adhesion and function.

Stabilizing to disruptive transition of focal adhesion response to mechanical forces

Strong mechanical forces can, obviously, disrupt cell-cell and cell-matrix adhesions, e.g., cyclic uniaxial stretch induces instability of cell adhesion, which then causes the reorientation of cells away from the stretching direction. However, recent experiments also demonstrated the existence of force dependent adhesion growth (rather than dissociation). To provide a quantitative explanation for the two seemingly contradictory phenomena, a microscopic model that includes both integrin-integrin interaction and integrin-ligand interaction is developed at molecular level by treating the focal adhesion as an adhesion cluster. The integrin clustering dynamics and integrin-ligand binding dynamics are then simulated within one unified theoretical frame with Monte Carlo simulation. We find that the focal adhesion will grow when the traction force is higher than a relative small threshold value, and the growth is dominated by the reduction of local chemical potential energy by the traction force. In contrast, the focal adhesion will rupture when the traction force exceeds a second threshold value, and the rupture is dominated by the breaking of integrin-ligand bonds. Consistent with the experiments, these results suggest a force map for various responses of cell adhesion to different scales of mechanical force.

Nanotopographical modification: a regulator of cellular function through focal adhesions

As materials technology and the field of biomedical engineering advances, the role of cellular mechanisms, in particular adhesive interactions with implantable devices, becomes more relevant in both research and clinical practice. A key tenet of medical device design has evolved from the exquisite ability of biological systems to respond to topographical features or chemical stimuli, a process that has led to the development of next-generation biomaterials for a wide variety of clinical disorders. In vitro studies have identified nanoscale features as potent modulators of cellular behavior through the onset of focal adhesion formation. The focus of this review is on the recent developments concerning the role of nanoscale structures on integrin-mediated adhesion and cellular function with an emphasis on the generation of medical constructs with regenerative applications.

FROM THE CLINICAL EDITOR

In this review, recent developments related to the role of nanoscale structures on integrin-mediated adhesion and cellular function is discussed, with an emphasis on regenerative applications.

A tiny touch: activation of cell signaling pathways with magnetic nanoparticles

Magnetic nanoparticles can be coated with specific ligands that enable them to bind to receptors on a cell's surface. When a magnetic field is applied, it pulls on the particles so that they deliver nanoscale forces at the ligand-receptor bond. It has been observed that mechanical stimulation in this manner can activate cellular signaling pathways that are known as mechanotransduction pathways. Integrin receptors, stretch-activated ion channels, focal adhesions, and the cytoskeleton are key players in activating these pathways, but there is still much we do not know about how these mechanosensors work. Current evidence indicates that applied forces at these structures can activate Ca(2+) signaling, Src family protein kinase, MAPK, and RhoGTPase pathways. The techniques of magnetic twisting and magnetic tweezers, which use magnetic particles to apply forces to cells, afford a fine degree of control over how cells are stimulated and hold much promise in elucidating the fundamentals of mechanotransduction. The particles are generally not harmful to cellular health, and their nanoscale dimensions make them advantageous for probing a cell's molecular-scale sensory structures. This review highlights the basic aspects of magnetic nanoparticles, magnetic particle techniques and the structures and pathways that are involved in mechanotransduction.

Spatial patterning of cell proliferation and differentiation depends on mechanical stress magnitude

Mechanical stress has been proposed as a major regulator of tissue morphogenesis; however, it remains unclear what is the exact mechanical signal that leads to local tissue pattern formation. We explored this question by using a micropatterned cell aggregate model in which NIH 3T3 fibroblasts were cultured on micropatterned adhesive islands and formed cell aggregates (or "cell islands") of triangular, square, and circular shapes. We found that the cell islands generated high levels of mechanical stresses at their perimeters compared to their inner regions. Regardless of the shape of cell islands, the mechanical stress patterns corresponded to both cell proliferation and differentiation patterns, meaning that high level of cell proliferation and differentiation occurred at the locations where mechanical stresses were also high. When mechanical stretching was applied to cell islands to elevate overall mechanical stress magnitudes, cell proliferation and differentiation generally increased with the relatively higher mechanical stresses, but neither cell proliferation nor differentiation patterns followed the new mechanical stress pattern. Thus, our findings indicate that a certain range of mechanical stress magnitudes, termed window stress threshold, drives formation of cell proliferation and differentiation patterns and hence possibly functions as a morphogenetic cue for local tissue pattern formation in vivo.

Fluorescence proteins, live-cell imaging, and mechanobiology: seeing is believing

Fluorescence proteins (FPs) have been widely used for live-cell imaging in the past decade. This review summarizes the recent advances in FP development and imaging technologies using FPs to monitor molecular localization and activities and gene expressions in live cells. We also discuss the utilization of FPs to develop molecular biosensors and the principles and application of advanced technologies such as fluorescence resonance energy transfer (FRET), fluorescence recovery after photobleaching (FRAP), fluorescence lifetime imaging microscopy (FLIM), and chromophore-assisted light inactivation (CALI). We present examples of the application of FPs and biosensors to visualize mechanotransduction events with high spatiotemporal resolutions in live cells. These live-cell imaging technologies, which represent a frontier area in biomedical engineering, can shed new light on the mechanisms regulating mechanobiology at cellular and molecular levels in normal and pathophysiological conditions.

Is cell rheology governed by nonequilibrium-to-equilibrium transition of noncovalent bonds?

A living cell deforms or flows in response to mechanical stresses. A recent report shows that dynamic mechanics of living cells depends on the timescale of mechanical loading, in contrast to the prevailing view of some authors that cell rheology is timescale-free. Yet the molecular basis that governs this timescale-dependent behavior is elusive. Using molecular dynamics simulations of protein-protein noncovalent interactions, we show that multipower laws originate from a nonequilibrium-to-equilibrium transition: when the loading rate is faster than the transition rate, the power-law exponent alpha(1) is weak; when the loading rate is slower than the transition rate, the exponent alpha(2) is strong. The model predictions are confirmed in both embryonic stem cells and differentiated cells. Embryonic stem cells are less stiff, more fluidlike, and exhibit greater alpha(1) than their differentiated counterparts. By introducing a near-equilibrium frequency f(eq), we show that all data collapse into two power laws separated by f/f(eq), which is unity. These findings suggest that the timescale-dependent rheology in living cells originates from the nonequilibrium-to-equilibrium transition of the dynamic response of distinct, force-driven molecular processes.

Slow stress propagation in adherent cells

Mechanical cues influence a wide range of cellular behaviors including motility, differentiation, and tumorigenesis. Although previous studies elucidated the role of specific players such as ion channels and focal adhesions as local mechanosensors, the investigation of how mechanical perturbations propagate across the cell is necessary to understand the spatial coordination of cellular processes. Here we quantify the magnitude and timing of intracellular stress propagation, using atomic force microscopy and particle tracking by defocused fluorescence microscopy. The apical cell surface is locally perturbed by atomic force microscopy cantilever indentation, and distal displacements are measured in three dimensions by tracking integrin-bound fluorescent particles. We observe an immediate response and slower equilibration, occurring over times that increase with distance from perturbation. This distance-dependent equilibration occurs over several seconds and can be eliminated by disruption of the actin cytoskeleton. Our experimental results are not explained by traditional viscoelastic models of cell mechanics, but they are consistent with predictions from poroelastic models that include both cytoskeletal deformation and flow of the cytoplasm. Our combined atomic force microscopy-particle tracking measurements provide direct evidence of slow, distance-dependent dissipative stress propagation in response to external mechanical cues and offer new insights into mechanical models and physiological behaviors of adherent cells.

Mapping cell-matrix stresses during stretch reveals inelastic reorganization of the cytoskeleton

The mechanical properties of the living cell are intimately related to cell signaling biology through cytoskeletal tension. The tension borne by the cytoskeleton (CSK) is in part generated internally by the actomyosin machinery and externally by stretch. Here we studied how cytoskeletal tension is modified during stretch and the tensional changes undergone by the sites of cell-matrix interaction. To this end we developed a novel technique to map cell-matrix stresses during application of stretch. We found that cell-matrix stresses increased with imposition of stretch but dropped below baseline levels on stretch release. Inhibition of the actomyosin machinery resulted in a larger relative increase in CSK tension with stretch and in a smaller drop in tension after stretch release. Cell-matrix stress maps showed that the loci of cell adhesion initially bearing greater stress also exhibited larger drops in traction forces after stretch removal. Our results suggest that stretch partially disrupts the actin-myosin apparatus and the cytoskeletal structures that support the largest CSK tension. These findings indicate that cells use the mechanical energy injected by stretch to rapidly reorganize their structure and redistribute tension.

Vascular adaptation and mechanical homeostasis at tissue, cellular, and sub-cellular levels

Blood vessels exhibit a remarkable ability to adapt throughout life that depends upon genetic programming and well-orchestrated biochemical processes. Findings over the past four decades demonstrate, however, that the mechanical environment experienced by these vessels similarly plays a critical role in governing their adaptive responses. This article briefly reviews, as illustrative examples, six cases of tissue level growth and remodeling, and then reviews general observations at cell-matrix, cellular, and sub-cellular levels, which collectively point to the existence of a "mechanical homeostasis" across multiple length and time scales that is mediated primarily by endothelial cells, vascular smooth muscle cells, and fibroblasts. In particular, responses to altered blood flow, blood pressure, and axial extension, disease processes such as cerebral aneurysms and vasospasm, and diverse experimental manipulations and clinical treatments suggest that arteries seek to maintain constant a preferred (homeostatic) mechanical state. Experiments on isolated microvessels, cell-seeded collagen gels, and adherent cells isolated in culture suggest that vascular cells and sub-cellular structures such as stress fibers and focal adhesions likewise seek to maintain constant a preferred mechanical state. Although much is known about mechanical homeostasis in the vasculature, there remains a pressing need for more quantitative data that will enable the formulation of an integrative mathematical theory that describes and eventually predicts vascular adaptations in response to diverse stimuli. Such a theory promises to deepen our understanding of vascular biology as well as to enable the design of improved clinical interventions and implantable medical devices.

Analysis of the suitability of calreticulin inducible HEK cells for adhesion studies: microscopical and biochemical comparisons

Calreticulin is a Ca(2+)-buffering ER chaperone that also modulates cell adhesiveness. In order to study the effect of calreticulin on the expression of adhesion-related genes, we created a calreticulin inducible Human Embryonic Kidney (HEK) 293 cell line. We found that fibronectin mRNA and both intra- and extra-cellular fibronectin protein levels increased following calreticulin induction. However, despite this increase in fibronectin, HEK293 cells did not assemble an extracellular fibrillar fibronectin matrix regardless of the level of calreticulin expression. Furthermore, HEK293 cells exhibited a poorly organized actin cytoskeleton, did not have clustered fibronectin receptors at the cell surface, and did not form focal contacts. This likely accounts for the lack of fibronectin matrix deposition by these cells regardless of calreticulin expression level. Vinculin abundance did not appreciably increase upon calreticulin induction and the level of active c-Src, a regulatory kinase of focal contacts, was found to be abundant and unregulated by calreticulin induction in these cells. The inability to form stable focal contacts and to commence fibronectin fibrillogenesis due to high c-Src activity may be responsible for the poor adhesive phenotype of HEK 293 cells. Thus, we show here that HEK293 cells are not suitable for microscopical studies of cell-substratum adhesions, but are best suited for biochemical studies.

TGF-beta suppresses IFN-gamma-STAT1-dependent gene transcription by enhancing STAT1-PIAS1 interactions in epithelia but not monocytes/macrophages

IFN-gamma and TGF-beta are important regulators of mucosal immunity, typically functioning in opposition to each other. In this study, we assessed whether TGF-beta could modulate IFN-gamma-induced STAT1 signaling. Model epithelial cell lines (HEp-2, HT-29, and T84) or monocytes/macrophages (THP-1 cell line, human blood mononuclear cells) were pretreated with TGF-beta (1 ng/ml; 5-60 min), followed by IFN-gamma exposure (20 ng/ml; 30 min), and then STAT1 transcriptional activity, DNA-binding activity, phosphorylation, and methylation were assessed. Some epithelia were transfected with an expression plasmid encoding SMAD7 to block TGF-beta-SMAD signaling. Epithelia, but not macrophages, pretreated with TGF-beta were hyporesponsive to IFN-gamma stimulation as indicated by reduced expression of four STAT1-regulated genes and reduced STAT1 DNA binding on EMSA. However, STAT1 Tyr(701)-, Ser(727) phosphorylation, and nuclear recruitment of STAT1 were not significantly different in IFN-gamma with or without TGF-beta-treated cells, indicating that the effects of TGF-beta are downstream of IFN-gammaR-JAK-STAT1 interaction. The TGF-beta effect was not dependent on ERK1/2, p38, or JNK activation but was prevented by overexpression of the inhibitory SMAD7 protein. Additional studies suggest that TGF-beta blockade of IFN-gamma activity in epithelia is via enhanced sequestering of STAT1 by pre-existing protein inhibitor of activated STAT1. These results demonstrate that TGF-beta rapidly suppresses IFN-gamma-driven STAT1 signaling by reducing DNA binding via promotion of STAT1-protein inhibitor of activated STAT1 interactions and not inhibition of STAT1 activation; an event that may be specific to epithelia and represent a novel mode of action of TGF-beta.

Magnetic tweezers in cell biology

We discuss herein the theory as well as some design considerations of magnetic tweezers. This method of generating force on magnetic particles bound to biological entities is shown to have a number of advantages over other techniques: forces are exerted in noncontact mode, they can be large in magnitude (order of 10 nanonewtons), and adjustable in direction, static or oscillatory. One apparatus built in our laboratory is described in detail, along with examples of experimental applications and results.

Measurement of local strain on cell membrane at initiation point of calcium signaling response to applied mechanical stimulus in osteoblastic cells

In adaptive bone remodeling, it is believed that bone cells such as osteoblasts, osteocytes and osteoclasts can sense mechanical stimuli and modulate their remodeling activities. However, the mechanosensing mechanism by which these cells sense mechanical stimuli and transduce mechanical signals into intracellular biochemical signals is still not clearly understood. From the viewpoint of cell biomechanics, it is important to clarify the mechanical conditions under which the cellular mechanosensing mechanism is activated. The aims of this study were to evaluate a mechanical condition, that is, the local strain on the cell membrane, at the initiation point of the intracellular calcium signaling response to the applied mechanical stimulus in osteoblast-like MC3T3-E1 cells, and to investigate the effect of deformation velocity on the characteristics of the cellular response. To apply a local deformation to a single cell, a glass microneedle was directly indented to the cell and moved horizontally on the cell membrane. To observe the cellular response and the deformation of the cell membrane, intracellular calcium ions and the cell membrane were labeled using fluorescent dyes and simultaneously observed by confocal laser scanning microscopy. The strain distribution on the cell membrane attributable to the applied local deformation and the strain magnitude at the initiation point of the calcium signaling responses were analyzed using obtained fluorescence images. From two-dimensionally projected images, it was found that there is a local compressive strain at the initiation point of calcium signaling. Moreover, the cellular response revealed velocity dependence, that is, the cells seemed to respond with a higher sensitivity to a higher deformation velocity. From the viewpoint of cell biomechanics, these results provide us a fundamental understanding of the mechanosensing mechanism of osteoblast-like cells.

Phosphatidylinositol 3'-kinase is a critical mediator of interferon-gamma-induced increases in enteric epithelial permeability

The epithelial lining of mucosal surfaces acts as a barrier to regulate the entry of antigen and pathogens. Nowhere is this function of the contiguous epithelium more important than in the gut, which is continually exposed to a huge antigenic load and, in the colon, an immense commensal microbiota. We assessed the intracellular signaling events that underlie interferon (IFN) gamma-induced increases in epithelial permeability using monolayers of the human colonic T84 epithelial cell line. Confluent epithelial monolayers on semipermeable supports were treated with IFNgamma (20 ng/ml), and barrier function was assessed 48 h later by measuring transepithelial electrical resistance (TER: reflects passive ion flux), fluxes of (51)Cr-EDTA and horseradish peroxidase (HRP), and transcytosis of noninvasive, nonpathogenic Escherichia coli (strain HB101). Exposure to IFNgamma decreased barrier function as assessed by all four markers. The phosphatidylinositol 3'-kinase (PI-3K) inhibitors, LY294002 [2-(4-morpholinyl)-8-phenyl-1(4H)-benzopyran-4-one hydrochloride] and wortmannin, did not affect baseline permeability characteristics but completely blocked the drop in TER, increased fluxes of (51)Cr-EDTA and HRP, and significantly reduced E. coli transcytosis evoked by IFNgamma. In addition, use of the pan-protein kinase C (PKC) inhibitor, bisindolylmaleimide I (5 muM), but not rottlerin (blocks PKCdelta), partially ameliorated the drop in TER and inhibited increased E. coli transcytosis. Addition of the PI-3K and PKC inhibitors to epithelia 6 h after IFNgamma exposure still prevented the increase in paracellular permeability but not E. coli transcytosis. Thus, IFNgamma-induced increases in epithelial paracellular and transcellular permeability are critically dependent on PI-3K activity, which may represent an epithelial-specific target to treat immune-mediated loss of barrier function.

A theoretical model for F-actin remodeling in vascular smooth muscle cells subjected to cyclic stretch

A constrained mixture theory model was developed and used to estimate remodeling of F-actin in vascular smooth muscle cells that were subjected to 10% equibiaxial stretching for up to 30min. The model was based on a synthesis of data on time-dependent changes in atomic force microscopy measured cell stiffness and immunofluorescence measured focal adhesion associated vinculin as well as data on stress fiber stiffness and pre-stretch. Results suggest that an observed acute (after 2min of stretching) increase in cell stiffness is consistent with an increased stretch of the originally present F-actin plus an assembly of new F-actin having nearly homeostatic values of stretch. Moreover, the subsequent (after 30min of stretching) decrease in cell stiffness back towards the baseline value is consistent with a replacement of the overstretched original filaments with the new (reassembled), less stretched filaments. That is, overall cell response is consistent with a recently proposed concept of "tensional homeostasis" whereby cells seek to maintain constant certain mechanical factors via a remodeling of intracellular and transmembrane proteins. Although there is a need to refine the model based on more comprehensive data sets, using multiple experimental approaches, the present results suggest that a constrained mixture theory can capture salient features of the dynamics of F-actin remodeling and that it offers some advantages over many past methods of modeling, particularly those based on classical linearized viscoelasticity.

Finite-element stress analysis of a multicomponent model of sheared and focally-adhered endothelial cells

Hemodynamic forces applied at the apical surface of vascular endothelial cells may be redistributed to and amplified at remote intracellular organelles and protein complexes where they are transduced to biochemical signals. In this study we sought to quantify the effects of cellular material inhomogeneities and discrete attachment points on intracellular stresses resulting from physiological fluid flow. Steady-state shear- and magnetic bead-induced stress, strain, and displacement distributions were determined from finite-element stress analysis of a cell-specific, multicomponent elastic continuum model developed from multimodal fluorescence images of confluent endothelial cell (EC) monolayers and their nuclei. Focal adhesion locations and areas were determined from quantitative total internal reflection fluorescence microscopy and verified using green fluorescence protein-focal adhesion kinase (GFP-FAK). The model predicts that shear stress induces small heterogeneous deformations of the endothelial cell cytoplasm on the order of <100 nm. However, strain and stress were amplified 10-100-fold over apical values in and around the high-modulus nucleus and near focal adhesions (FAs) and stress distributions depended on flow direction. The presence of a 0.4 microm glycocalyx was predicted to increase intracellular stresses by approximately 2-fold. The model of magnetic bead twisting rheometry also predicted heterogeneous stress, strain, and displacement fields resulting from material heterogeneities and FAs. Thus, large differences in moduli between the nucleus and cytoplasm and the juxtaposition of constrained regions (e.g. FAs) and unattached regions provide two mechanisms of stress amplification in sheared endothelial cells. Such phenomena may play a role in subcellular localization of early mechanotransduction events.

Cell shape and cell division

The correlation between cell shape elongation and the orientation of the division axis described by early cell biologists is still used as a paradigm in developmental studies. However, analysis of early embryo development and tissue morphogenesis has highlighted the role of the spatial distribution of cortical cues able to guide spindle orientation. In vitro studies of cell division have revealed similar mechanisms. Recent data support the possibility that the orientation of cell division in mammalian cells is dominated by cell adhesion and the associated traction forces developed in interphase. Cell shape is a manifestation of these adhesive and tensional patterns. These patterns control the spatial distribution of cortical signals and thereby guide spindle orientation and daughter cell positioning. From these data, cell division appears to be a continuous transformation ensuring the maintenance of tissue mechanical integrity.

High-resolution solid modeling of biological samples imaged with 3D fluorescence microscopy

Optical-sectioning, digital fluorescence microscopy provides images representing temporally- and spatially-resolved molecular-scale details of the substructures of living cells. To render such images into solid models for further computational analyses, we have developed an integrated system of image acquisition, processing, and rendering, which includes a new empirical technique to correct for axial distortions inherent in fluorescence microscopy due to refractive index mismatches between microscope objective immersion medium, coverslip glass, and water. This system takes advantage of the capabilities of ultra-high numerical aperture objectives (e.g. total internal reflection fluorescence microscopy) and enables faithful three-dimensional rendering of living cells into solid models amenable to further computational analysis. An example of solid modeling of bovine aortic endothelial cells and their nuclei is presented. Since many cellular level events are temporally and spatially confined, such integrated image acquisition, processing, rendering, and computational analysis, will enable, in silico, the generation of new computational models for cell mechanics and signaling.

Adhesion-mediated mechanosensitivity: a time to experiment, and a time to theorize

Adhesion-mediated signaling provides cells with information about multiple parameters of their microenvironment, including mechanical characteristics. Often, such signaling is based on a unique feature of adhesion structures: their ability to grow and strengthen when force is applied to them, either from within the cell or from the outside. Such adhesion reinforcement is characteristic of integrin-mediated cell-matrix adhesions, but may also operate in other types of adhesion structures. Though the amount of knowledge about adhesion-mediated signaling is growing rapidly, the mechanisms underlying force-dependent regulation of junction assembly are largely unknown. Experiments have been carried out that have started to uncover the major signaling pathways involved in the response of adhesion sites to force. Theoretical models have also been used to address the physical mechanisms underlying adhesion-mediated mechanosensing.

Mechanotransduction involving multimodular proteins: converting force into biochemical signals

Cells can sense and transduce a broad range of mechanical forces into distinct sets of biochemical signals that ultimately regulate cellular processes, including adhesion, proliferation, differentiation, and apoptosis. Deciphering at the nanoscale the design principles by which sensory elements are integrated into structural protein motifs whose conformations can be switched mechanically is crucial to understand the process of transduction of force into biochemical signals that are then integrated to regulate mechanoresponsive pathways. While the major focus in the search for mechanosensory units has been on membrane proteins such as ion channels, integrins, and associated cytoplasmic complexes, a multimodular design of tandem repeats of various structural motifs is ubiquitously found among extracellular matrix proteins, as well as cell adhesion molecules, and among many intracellular players that physically link transmembrane proteins to the contractile cytoskeleton. Single-molecule studies have revealed an unexpected richness of mechanosensory motifs, including force-regulated conformational changes of loop-exposed molecular recognition sites, intermediate states in the unraveling pathway that might either expose cryptic binding or phosphorylation sites, or regions that display enzymatic activity only when unmasked by force. Insights into mechanochemical signal conversion principles will also affect various technological fields, from biotechnology to tissue engineering and drug development.

Cellular adaptation to mechanical stress: role of integrins, Rho, cytoskeletal tension and mechanosensitive ion channels

To understand how cells sense and adapt to mechanical stress, we applied tensional forces to magnetic microbeads bound to cell-surface integrin receptors and measured changes in bead displacement with sub-micrometer resolution using optical microscopy. Cells exhibited four types of mechanical responses: (1) an immediate viscoelastic response; (2) early adaptive behavior characterized by pulse-to-pulse attenuation in response to oscillatory forces; (3) later adaptive cell stiffening with sustained (>15 second) static stresses; and (4) a large-scale repositioning response with prolonged (>1 minute) stress. Importantly, these adaptation responses differed biochemically. The immediate and early responses were affected by chemically dissipating cytoskeletal prestress (isometric tension), whereas the later adaptive response was not. The repositioning response was prevented by inhibiting tension through interference with Rho signaling, similar to the case of the immediate and early responses, but it was also prevented by blocking mechanosensitive ion channels or by inhibiting Src tyrosine kinases. All adaptive responses were suppressed by cooling cells to 4 degrees C to slow biochemical remodeling. Thus, cells use multiple mechanisms to sense and respond to static and dynamic changes in the level of mechanical stress applied to integrins.

Local force and geometry sensing regulate cell functions

The shapes of eukaryotic cells and ultimately the organisms that they form are defined by cycles of mechanosensing, mechanotransduction and mechanoresponse. Local sensing of force or geometry is transduced into biochemical signals that result in cell responses even for complex mechanical parameters such as substrate rigidity and cell-level form. These responses regulate cell growth, differentiation, shape changes and cell death. Recent tissue scaffolds that have been engineered at the micro- and nanoscale level now enable better dissection of the mechanosensing, transduction and response mechanisms.

Cellular fluid mechanics and mechanotransduction

Mechanotransduction, the transformation of an applied mechanical force into a cellular biomolecular response, is briefly reviewed focusing on fluid shear stress and endothelial cells. Particular emphasis is placed on recent studies of the surface proteoglycan layer (glycocalyx) as a primary sensor of fluid shear stress that can transmit force to apical structures such as the plasma membrane or the actin cortical web where transduction can take place or to more remote regions of the cell such as intercellular junctions and basal adhesion plaques where transduction can also occur. All of these possibilities are reviewed from an integrated perspective.

Nanotechnology for Cell–Substrate Interactions

In the pursuit to understand the interaction between cells and their underlying substrates, the life sciences are beginning to incorporate micro- and nanotechnology-based tools to probe and measure cells. The development of these tools portends endless possibilities for new insights into the fundamental relationships between cells and their surrounding microenvironment that underlie the physiology of human tissue. Here, we review techniques and tools that have been used to study how a cell responds to the physical factors in its environment. We also discuss unanswered questions that could be addressed by these approaches to better elucidate the molecular processes and mechanical forces that dominate the interactions between cells and their physical scaffolds.

Mechanical force mobilizes zyxin from focal adhesions to actin filaments and regulates cytoskeletal reinforcement

Organs and tissues adapt to acute or chronic mechanical stress by remodeling their actin cytoskeletons. Cells that are stimulated by cyclic stretch or shear stress in vitro undergo bimodal cytoskeletal responses that include rapid reinforcement and gradual reorientation of actin stress fibers; however, the mechanism by which cells respond to mechanical cues has been obscure. We report that the application of either unidirectional cyclic stretch or shear stress to cells results in robust mobilization of zyxin from focal adhesions to actin filaments, whereas many other focal adhesion proteins and zyxin family members remain at focal adhesions. Mechanical stress also induces the rapid zyxin-dependent mobilization of vasodilator-stimulated phosphoprotein from focal adhesions to actin filaments. Thickening of actin stress fibers reflects a cellular adaptation to mechanical stress; this cytoskeletal reinforcement coincides with zyxin mobilization and is abrogated in zyxin-null cells. Our findings identify zyxin as a mechanosensitive protein and provide mechanistic insight into how cells respond to mechanical cues.

Exploring the molecular basis for mechanosensation, signal transduction, and cytoskeletal remodeling

Living cells respond to mechanical stimulation in a variety of ways that affect nearly every aspect of their function. Such responses can range from changes in cell morphology to activation of signaling cascades and changes in cell phenotype. Although the biochemical signaling pathways activated by mechanical stimulus have been extensively studied, little is known of the basic mechanisms by which mechanical force is transduced into a biochemical signal, or how the cell changes its behavior or properties in response to external or internal stresses. One hypothesis is that forces transmitted via individual proteins either at the site of cell adhesion to its surroundings or within the stress-bearing members of the cytoskeleton cause conformational changes that alter their binding affinity to other intracellular molecules. This altered equilibrium state can subsequently either initiate a biochemical signaling cascade or produce more immediate and local structural changes. To understand the phenomena related to mechanotransduction, the mechanics and chemistry of single molecules that form the signal transduction pathways must be examined. This paper presents a range of case studies that seek to explore the molecular basis of mechanical signal sensation and transduction, with particular attention to their macroscopic manifestation in the cell properties, e.g. in focal adhesion remodeling due to local application of force or changes in cytoskeletal rheology and remodeling due to cellular deformation.

Visualizing the mechanical activation of Src

The mechanical environment crucially influences many cell functions. However, it remains largely mysterious how mechanical stimuli are transmitted into biochemical signals. Src is known to regulate the integrin-cytoskeleton interaction, which is essential for the transduction of mechanical stimuli. Using fluorescent resonance energy transfer (FRET), here we develop a genetically encoded Src reporter that enables the imaging and quantification of spatio-temporal activation of Src in live cells. We introduced a local mechanical stimulation to human umbilical vein endothelial cells (HUVECs) by applying laser-tweezer traction on fibronectin-coated beads adhering to the cells. Using the Src reporter, we observed a rapid distal Src activation and a slower directional wave propagation of Src activation along the plasma membrane. This wave propagated away from the stimulation site with a speed (mean +/- s.e.m.) of 18.1 +/- 1.7 nm s(-1). This force-induced directional and long-range activation of Src was abolished by the disruption of actin filaments or microtubules. Our reporter has thus made it possible to monitor mechanotransduction in live cells with spatio-temporal characterization. We find that the transmission of mechanically induced Src activation is a dynamic process that directs signals via the cytoskeleton to spatial destinations.