Nondestructive cryomicro-CT imaging enables structural and molecular analysis of human lung tissue

Development of a unilateral porcine emphysema model induced by porcine pancreatic elastase

Emphysema is one of the pathological hallmarks of chronic obstructive pulmonary disease. We have recently reported that radiofrequency therapy improves lung function in rodent models of emphysema. However, preclinical data using large animals is necessary for clinical translation. Here, we describe the work performed to establish a unilateral porcine emphysema model. Different doses of porcine pancreatic elastase (PPE) were instilled into the left lung of 10 Yucatan pigs. Three additional pigs were used as controls. Six weeks after instillation, lungs were harvested. Lung compliance was measured by a water displacement method and plethysmography. Systematic uniform random sampling of the left and right lungs was performed independently to measure alveolar surface area using micro-computed tomography (micro-CT) and histology. In pigs instilled with 725-750 U/kg of PPE (PPE group, n = 6), the compliance of the left lung was significantly higher by 37.6% than that of the right lung (P = 0.03) using the water displacement method. With plethysmography, the volume of the left lung was significantly larger than that of the right lung at 3, 5, and 10 cmH2O. Measurements from either micro-CT or histology images showed a significant decrease in alveolar surface area by 14.2% or 14.5% (P = 0.031) in the left lung compared with the right lung of the PPE group. A unilateral model for mild emphysema in Yucatan pigs has been established, which can now be used for evaluating novel therapeutics and interventional strategies.NEW & NOTEWORTHY For clinical translation, preclinical data using large animal models is necessary. However, papers describing an emphysema model in pigs, which are anatomically and physiologically similar to humans, are lacking. Here, we report success in creating a unilateral mild-emphysema model in pigs with only one single dose of porcine pancreatic elastase. This model will be useful in bringing novel technologies and therapies from small animals to humans with emphysema.

Analysis of fixation materials in micro-CT: It doesn't always have to be styrofoam

Good fixation of filigree specimens for micro-CT examinations is often a challenge. Movement artefacts, over-radiation or even crushing of the specimen can easily occur. Since different specimens have different requirements, we scanned, analysed and compared 19 possible fixation materials under the same conditions in the micro-CT. We focused on radiodensity, porosity and reversibility of these fixation materials. Furthermore, we have made sure that all materials are cheap and easily available. The scans were performed with a SkyScan 1173 micro-CT. All dry fixation materials tested were punched into 5 mm diameter cylinders and clamped into 0.2 ml reaction vessels. A voxel size of 5.33 μm was achieved in a 180° scan in 0.3° steps. Ideally, fixation materials should not be visible in the reconstructed image, i.e., barely binarised. Besides common micro-CT fixation materials such as styrofoam (-935 Hounsfield Units) or Basotect foam (-943 Hounsfield Units), polyethylene air cushions (-944 Hounsfield Units), Micropor foam (-926 Hounsfield Units) and polyurethane foam, (-960 Hounsfield Units to -470 Hounsfield Units) have proved to be attractive alternatives. Furthermore, more radiopaque materials such as paraffin wax granulate (-640 Hounsfield Units) and epoxy resin (-190 Hounsfield Units) are also suitable as fixation materials. These materials often can be removed in the reconstructed image by segmentation. Sample fixations in the studies of recent years are almost all limited to fixation in Parafilm, Styrofoam, or Basotect foam if the fixation type is mentioned at all. However, these are not always useful, as styrofoam, for example, dissolves in some common media such as methylsalicylate. We show that micro-CT laboratories should be equipped with various fixation materials to achieve high-level image quality.

Volumetric Tissue Imaging of Surgical Tissue Specimens Using Micro-Computed Tomography: An Emerging Digital Pathology Modality for Nondestructive, Slide-Free Microscopy-Clinical Applications of Digital Pathology in 3 Dimensions

OBJECTIVES

Micro-computed tomography (micro-CT) is a novel, nondestructive, slide-free digital imaging modality that enables the acquisition of high-resolution, volumetric images of intact surgical tissue specimens. The aim of this systematic mapping review is to provide a comprehensive overview of the available literature on clinical applications of micro-CT tissue imaging and to assess its relevance and readiness for pathology practice.

METHODS

A computerized literature search was performed in the PubMed, Scopus, Web of Science, and CENTRAL databases. To gain insight into regulatory and financial considerations for performing and examining micro-CT imaging procedures in a clinical setting, additional searches were performed in medical device databases.

RESULTS

Our search identified 141 scientific articles published between 2000 and 2021 that described clinical applications of micro-CT tissue imaging. The number of relevant publications is progressively increasing, with the specialties of pulmonology, cardiology, otolaryngology, and oncology being most commonly concerned. The included studies were mostly performed in pathology departments. Current micro-CT devices have already been cleared for clinical use, and a Current Procedural Terminology (CPT) code exists for reimbursement of micro-CT imaging procedures.

CONCLUSIONS

Micro-CT tissue imaging enables accurate volumetric measurements and evaluations of entire surgical specimens at microscopic resolution across a wide range of clinical applications.

Analysis of the alveolar shape in 3-D

Mechanical forces affect the alveolar shape, depending on location and tissue composition, and vary during the respiratory cycle. This study performs alveolar morphomics in different lobes of human lungs using models generated from three-dimensional (3-D) micro-computed tomography (microCT) images. Cylindrical tissue samples (1.6 cm × 2 cm) were extracted from two nontransplantable donor lungs (one ex-smoker and one smoker, 3 samples per subject) that were air-inflated and frozen solid in liquid nitrogen vapor. Samples were scanned with microCT (11 µm/voxel). Within representative cubic regions of interest (5.5 mm edge length), alveoli were segmented to produce corresponding 3-D models from which quantitative data were obtained. The surface of segmented alveoli (n_alv_total = 23,587) was divided into individual planar surfaces (facets) and angles between facet normals were calculated. Moreover, the number of neighboring alveoli was estimated for every alveolus. In this study, we examined intraindividual differences in alveolar morphology, which were reproducible in the lungs of two subjects. The main aspects are higher mean alveolar volumes (v_alv: 6.64 × 10⁶ and 6.63 × 10⁶ µm³ vs. 5.78 × 10⁶ and 6.29 × 10⁶ µm³) and surface sizes (s_alv: 0.19 and 0.18 mm² vs. 0.17 mm² in both lower lobes) in both upper lung lobes compared with the lower lobes. An increasing number of facets (f_alv) from top to bottom (12 and 14 in the upper lobes; 14 and 15 in the lower lobes), as well as a decreasing number of alveolar neighbors (nei_alv: 9 and 8 in the upper lobes; 8 and 7 in the lower lobes) from the upper lobes to the lower lobes were observed. We could observe an increasing ratio of alveolar entrance size to the surface size of the alveoli from top to bottom (S_ratio_alv: 0.71 and 0.64 in the upper lobes, 0.73 and 0.70 in the lower lobes). The angles between facet normals (ang_alv) were larger in the upper lobes (67.72° and 62.44°) of both lungs than in the lower lobes (66.19° and 61.30°). By using this new approach of analyzing alveolar 3-D data, which enables the estimation of facet, neighbor, and shape characteristics, we aimed to establish the baseline measures for in-depth studies of mechanical conditions and morphology.

The molecular and cellular mechanisms associated with the destruction of terminal bronchioles in COPD

RATIONALE

Peripheral airway obstruction is a key feature of chronic obstructive pulmonary disease (COPD), but the mechanisms of airway loss are unknown. This study aims to identify the molecular and cellular mechanisms associated with peripheral airway obstruction in COPD.

METHODS

Ten explanted lung specimens donated by patients with very severe COPD treated by lung transplantation and five unused donor control lungs were sampled using systematic uniform random sampling (SURS), resulting in 240 samples. These samples were further examined by micro-computed tomography (CT), quantitative histology and gene expression profiling.

RESULTS

Micro-CT analysis showed that the loss of terminal bronchioles in COPD occurs in regions of microscopic emphysematous destruction with an average airspace size of ≥500 and <1000 µm, which we have termed a "hot spot". Based on microarray gene expression profiling, the hot spot was associated with an 11-gene signature, with upregulation of pro-inflammatory genes and downregulation of inhibitory immune checkpoint genes, indicating immune response activation. Results from both quantitative histology and the bioinformatics computational tool CIBERSORT, which predicts the percentage of immune cells in tissues from transcriptomic data, showed that the hot spot regions were associated with increased infiltration of CD4 and CD8 T-cell and B-cell lymphocytes.

INTERPRETATION

The reduction in terminal bronchioles observed in lungs from patients with COPD occurs in a hot spot of microscopic emphysema, where there is upregulation of IFNG signalling, co-stimulatory immune checkpoint genes and genes related to the inflammasome pathway, and increased infiltration of immune cells. These could be potential targets for therapeutic interventions in COPD.

From Macroscopy to Ultrastructure: An Integrative Approach to Pulmonary Pathology

Pathology and radiology are complimentary tools, and their joint application is often crucial in obtaining an accurate diagnosis in non-neoplastic pulmonary diseases. However, both come with significant limitations of their own: Computed Tomography (CT) can only visualize larger structures due to its inherent–relatively–poor resolution, while (histo) pathology is often limited due to small sample size and sampling error and only allows for a 2D investigation. An innovative approach of inflating whole lung specimens and subjecting these subsequently to CT and whole lung microCT allows for an accurate matching of CT-imaging and histopathology data of exactly the same areas. Systematic application of this approach allows for a more targeted assessment of localized disease extent and more specifically can be used to investigate early mechanisms of lung diseases on a morphological and molecular level. Therefore, this technique is suitable to selectively investigate changes in the large and small airways, as well as the pulmonary arteries, veins and capillaries in relation to the disease extent in the same lung specimen. In this perspective we provide an overview of the different strategies that are currently being used, as well as how this growing field could further evolve.

Volumetric Imaging of Lung Tissue at Micrometer Resolution: Clinical Applications of Micro-CT for the Diagnosis of Pulmonary Diseases

Micro-computed tomography (micro-CT) is a promising novel medical imaging modality that allows for non-destructive volumetric imaging of surgical tissue specimens at high spatial resolution. The aim of this study is to provide a comprehensive assessment of the clinical applications of micro-CT for the tissue-based diagnosis of lung diseases. This scoping review was conducted in accordance with the PRISMA Extension for Scoping Reviews, aiming to include every clinical study reporting on micro-CT imaging of human lung tissues. A literature search yielded 570 candidate articles, out of which 37 were finally included in the review. Of the selected studies, 9 studies explored via micro-CT imaging the morphology and anatomy of normal human lung tissue; 21 studies investigated microanatomic pulmonary alterations due to obstructive or restrictive lung diseases, such as chronic obstructive pulmonary disease, idiopathic pulmonary fibrosis, and cystic fibrosis; and 7 studies examined the utility of micro-CT imaging in assessing lung cancer lesions (n = 4) or in transplantation-related pulmonary alterations (n = 3). The selected studies reported that micro-CT could successfully detect several lung diseases providing three-dimensional images of greater detail and resolution than routine optical slide microscopy, and could additionally provide valuable volumetric insight in both restrictive and obstructive lung diseases. In conclusion, micro-CT-based volumetric measurements and qualitative evaluations of pulmonary tissue structures can be utilized for the clinical management of a variety of lung diseases. With micro-CT devices becoming more accessible, the technology has the potential to establish itself as a core diagnostic imaging modality in pathology and to enable integrated histopathologic and radiologic assessment of lung cancer and other lung diseases.

Recent advances in airway imaging using micro-computed tomography and computed tomography for chronic obstructive pulmonary disease

Chronic obstructive pulmonary disease (COPD) is a complex lung disease characterized by a combination of airway disease and emphysema. Emphysema is classified as centrilobular emphysema (CLE), paraseptal emphysema (PSE), or panlobular emphysema (PLE), and airway disease extends from the respiratory, terminal, and preterminal bronchioles to the central segmental airways. Although clinical computed tomography (CT) cannot be used to visualize the small airways, micro-CT has shown that terminal bronchiole disease is more severe in CLE than in PSE and PLE, and micro-CT findings suggest that the loss and luminal narrowing of terminal bronchioles is an early pathological change in CLE. Furthermore, the introduction of ultra-high-resolution CT has enabled direct evaluation of the proximal small (1 to 2-mm diameter) airways, and new CT analytical methods have enabled estimation of small airway disease and prediction of future COPD onset and lung function decline in smokers with and without COPD. This review discusses the literature on micro-CT and the technical advancements in clinical CT analysis for COPD. Hopefully, novel micro-CT findings will improve our understanding of the distinct pathogeneses of the emphysema subtypes to enable exploration of new therapeutic targets, and sophisticated CT imaging methods will be integrated into clinical practice to achieve more personalized management.

Complication and lung function impairment prediction using perfusion and computed tomography air trapping (CLIPPCAIR): protocol for the development and validation of a novel multivariable model for the prediction of post-resection lung function

Background

Recent advancements in computed tomography (CT) scanning and post processing have provided new means of assessing factors affecting respiratory function. For lung cancer patients requiring resection, and especially those with respiratory comorbidities such as chronic obstructive pulmonary disease (COPD), the ability to predict post-operative lung function is a crucial step in the lung cancer operability assessment. The primary objective of the CLIPPCAIR study is to use novel CT data to develop and validate an algorithm for the prediction of lung function remaining after pneumectomy/lobectomy.

Methods

Two sequential cohorts of non-small cell lung cancer patients requiring a pre-resection CT scan will be recruited at the Montpellier University Hospital, France: a test population (N=60) on which predictive models will be developed, and a further model validation population (N=100). Enrolment will occur during routine pre-surgical consults and follow-up visits will occur 1 and 6 months after pneumectomy/lobectomy. The primary outcome to be predicted is forced expiratory volume in 1 second (FEV1) six months after lung resection. The baseline CT variables that will be used to develop the primary multivariable regression model are: expiratory to inspiratory ratios of mean lung density (MLD_e/i for the total lung and resected volume), the percentage of voxels attenuating at less than ‒950 HU (PVOX_‒950 for the total lung and resected volume) and the ratio of iodine concentrations for the resected volume over that of the total lung. The correlation between predicted and real values will be compared to (and is expected to improve upon) that of previously published methods. Secondary analyses will include the prediction of transfer factor for carbon monoxide (TLCO) and complications in a similar fashion. The option to explore further variables as predictors of post-resection lung function or complications is kept open.

Discussion

Current methods for estimating post-resection lung function are imperfect and can add assessments (such as scintigraphy) to the pre-surgical workup. By using CT imaging data in a novel fashion, the results of the CLIPPCAIR study may not only improve such estimates, it may also simplify patient pathways.

Trial registration

Clinicaltrials.gov (NCT03885765).

Small Airway Reduction and Fibrosis is an Early Pathologic Feature of Idiopathic Pulmonary Fibrosis

RATIONALE

To improve disease outcomes in idiopathic pulmonary fibrosis (IPF) it is essential to understand its early pathophysiology so that it can be targeted therapeutically.

OBJECTIVES

Perform three-dimensional (3D) assessment of the IPF lung micro-structure using stereology and multi-resolution computed tomography (CT) imaging.

METHODS

Explanted lungs from IPF patients (n=8) and donor controls (n=8) were inflated with air and frozen. CT scans were used to assess large airways. Unbiased, systematic uniform random (SUR) samples (n=8/lung) were scanned with microCT for stereological assessment of small airways (number, airway wall and lumen area) and parenchymal fibrosis (volume fraction of tissue, alveolar surface area, and septal wall thickness).

RESULTS

The total number of airways on clinical CT was greater in IPF lungs than control lungs (p<0.01), due to an increase in the wall (p<0.05) and lumen area (p<0.05) resulting in more visible airways with a lumen larger than 2 mm. In IPF tissue samples without microscopic fibrosis, assessed by the volume fraction of tissue using microCT, there was a reduction in the number of the terminal (p<0.01) and transitional (p<0.001) bronchioles, and an increase in terminal bronchiole wall area (p<0.001) compared to control lungs. In IPF tissue samples with microscopic parenchymal fibrosis, terminal bronchioles had increased airway wall thickness (p<0.05), and dilated airway lumens (p<0.001) leading to honeycomb cyst formations.

CONCLUSION

This study has important implications for the current thinking on how the lung tissue is remodeled in IPF, and highlights small airways as a potential target to modify IPF outcomes.

Advanced single-cell technologies to guide the development of bioengineered lungs

Lung transplantation remains the only viable option for individuals suffering from end-stage lung failure. However, a number of current limitations exist including a continuing shortage of suitable donor lungs and immune rejection following transplantation. To address these concerns, engineering a decellularized biocompatible lung scaffold from cadavers reseeded with autologous lung cells to promote tissue regeneration is being explored. Proof-of-concept transplantation of these bioengineered lungs into animal models has been accomplished. However, these lungs were incompletely recellularized with resulting epithelial and endothelial leakage and insufficient basement membrane integrity. Failure to repopulate lung scaffolds with all of the distinct cell populations necessary for proper function remains a significant hurdle for the progression of current engineering approaches and precludes clinical translation. Advancements in 3D bioprinting, lung organoid models, and microfluidic device and bioreactor development have enhanced our knowledge of pulmonary lung development, as well as important cell-cell and cell-matrix interactions, all of which will help in the path to a bioengineered transplantable lung. However, a significant gap in knowledge of the spatiotemporal interactions between cell populations as well as relative quantities and localization within each compartment of the lung necessary for its proper growth and function remains. This review will provide an update on cells currently used for reseeding decellularized scaffolds with outcomes of recent lung engineering attempts. Focus will then be on how data obtained from advanced single-cell analyses, coupled with multiomics approaches and high-resolution 3D imaging, can guide current lung bioengineering efforts for the development of fully functional, transplantable lungs.

The transition from normal lung anatomy to minimal and established fibrosis in idiopathic pulmonary fibrosis (IPF)

BACKGROUND

The transition from normal lung anatomy to minimal and established fibrosis is an important feature of the pathology of idiopathic pulmonary fibrosis (IPF). The purpose of this report is to examine the molecular and cellular mechanisms associated with this transition.

METHODS

Pre-operative thoracic Multidetector Computed Tomography (MDCT) scans of patients with severe IPF (n = 9) were used to identify regions of minimal(n = 27) and established fibrosis(n = 27). MDCT, Micro-CT, quantitative histology, and next-generation sequencing were used to compare 24 samples from donor controls (n = 4) to minimal and established fibrosis samples.

FINDINGS

The present results extended earlier reports about the transition from normal lung anatomy to minimal and established fibrosis by showing that there are activations of TGFBI, T cell co-stimulatory genes, and the down-regulation of inhibitory immune-checkpoint genes compared to controls. The expression patterns of these genes indicated activation of a field immune response, which is further supported by the increased infiltration of inflammatory immune cells dominated by lymphocytes that are capable of forming lymphoid follicles. Moreover, fibrosis pathways, mucin secretion, surfactant, TLRs, and cytokine storm-related genes also participate in the transitions from normal lung anatomy to minimal and established fibrosis.

INTERPRETATION

The transition from normal lung anatomy to minimal and established fibrosis is associated with genes that are involved in the tissue repair processes, the activation of immune responses as well as the increased infiltration of CD4, CD8, B cell lymphocytes, and macrophages. These molecular and cellular events correlate with the development of structural abnormality of IPF and probably contribute to its pathogenesis.

Pathological Comparisons of Paraseptal and Centrilobular Emphysema in Chronic Obstructive Pulmonary Disease

Rationale: Although centrilobular emphysema (CLE) and paraseptal emphysema (PSE) are commonly identified on multidetector computed tomography (MDCT), little is known about the pathology associated with PSE compared with that of CLE.Objectives: To assess the pathological differences between PSE and CLE in chronic obstructive pulmonary disease (COPD).Methods: Air-inflated frozen lung specimens (n = 6) obtained from patients with severe COPD treated by lung transplantation were scanned with MDCT. Frozen tissue cores were taken from central (n = 8) and peripheral (n = 8) regions of each lung, scanned with micro-computed tomography (microCT), and processed for histology. The core locations were registered to the MDCT, and a percentage of PSE or CLE was assigned by radiologists to each of the regions. MicroCT scans were used to measure number and structural change of terminal bronchioles. Furthermore, microCT-based volume fractions of CLE and PSE allowed classifying cores into mild emphysema, CLE-dominant, and PSE-dominant.Measurements and Main Results: The percentages of PSE measured on MDCT and microCT were positively associated (P = 0.015). The number of terminal bronchioles per milliliter of lung and cross-sectional lumen area were significantly lower and wall area percentage was significantly higher in CLE-dominant regions compared with mild emphysema and PSE-dominant regions (all P < 0.05), whereas no difference was found between PSE-dominant and mild emphysema samples (all P > 0.5). Immunohistochemistry showed significantly higher infiltration of neutrophils (P = 0.002), but not of macrophages, CD4, CD8, or B cells, in PSE compared with CLE regions.Conclusions: The terminal bronchioles are relatively preserved, whereas neutrophilic inflammation is increased in PSE-dominant regions compared with CLE-dominant regions in patients with COPD.

Pathology of Idiopathic Pulmonary Fibrosis Assessed by a Combination of Microcomputed Tomography, Histology, and Immunohistochemistry

Idiopathic pulmonary fibrosis (IPF) is a fibrotic disease with the histology of usual interstitial pneumonia (UIP). Although the pathologist's visual inspection is central in histologic assessments, three-dimensional microcomputed tomography (microCT) assessment may complement the pathologist's scoring. We examined associations between the histopathologic features of UIP and IPF in explanted lungs and quantitative microCT measurements, including alveolar surface density, total lung volume taken up by tissue (%), and terminal bronchiolar number. Sixty frozen samples from 10 air-inflated explanted lungs with severe IPF and 36 samples from 6 donor control lungs were scanned with microCT and processed for histologic analysis. An experienced pathologist scored three major UIP criteria (patchy fibrosis, honeycomb, and fibroblastic foci), five additional pathologic changes, and immunohistochemical staining for CD68-, CD4-, CD8-, and CD79a-positive cells, graded on a 0 to 3+ scale. The alveolar surface density and terminal bronchiolar number decreased and the tissue percentage increased in lungs with IPF compared with controls. In lungs with IPF, lower alveolar surface density and higher tissue percentage were correlated with greater scores of patchy fibrosis, fibroblastic foci, honeycomb, CD79a-positive cells, and lymphoid follicles. A decreased number of terminal bronchioles was correlated with honeycomb score but not with the other scores. The three-dimensional microCT measurements reflect the pathological UIP and IPF criteria and suggest that the reduction in the terminal bronchioles may be associated with honeycomb cyst formation.

From Mouse to Man and Back: Closing the Correlation Gap between Imaging and Histopathology for Lung Diseases

Lung diseases such as fibrosis, asthma, cystic fibrosis, infection and cancer are life-threatening conditions that slowly deteriorate quality of life and for which our diagnostic power is high, but our knowledge on etiology and/or effective treatment options still contains important gaps. In the context of day-to-day practice, clinical and preclinical studies, clinicians and basic researchers team up and continuously strive to increase insights into lung disease progression, diagnostic and treatment options. To unravel disease processes and to test novel therapeutic approaches, investigators typically rely on end-stage procedures such as serum analysis, cyto-/chemokine profiles and selective tissue histology from animal models. These techniques are useful but provide only a snapshot of disease processes that are essentially dynamic in time and space. Technology allowing evaluation of live animals repeatedly is indispensable to gain a better insight into the dynamics of lung disease progression and treatment effects. Computed tomography (CT) is a clinical diagnostic imaging technique that can have enormous benefits in a research context too. Yet, the implementation of imaging techniques in laboratories lags behind. In this review we want to showcase the integrated approaches and novel developments in imaging, lung functional testing and pathological techniques that are used to assess, diagnose, quantify and treat lung disease and that may be employed in research on patients and animals. Imaging approaches result in often novel anatomical and functional biomarkers, resulting in many advantages, such as better insight in disease progression and a reduction in the numbers of animals necessary. We here showcase integrated assessment of lung disease with imaging and histopathological technologies, applied to the example of lung fibrosis. Better integration of clinical and preclinical imaging technologies with pathology will ultimately result in improved clinical translation of (therapy) study results.

Small airways pathology in idiopathic pulmonary fibrosis: a retrospective cohort study

BACKGROUND

The observation that patients with idiopathic pulmonary fibrosis (IPF) can have higher than normal expiratory flow rates at low lung volumes led to the conclusion that the airways are spared in IPF. This study aimed to re-examine the hypothesis that airways are spared in IPF using a multiresolution imaging protocol that combines multidetector CT (MDCT), with micro-CT and histology.

METHODS

This was a retrospective cohort study comparing explanted lungs from patients with severe IPF treated by lung transplantation with a cohort of unused donor (control) lungs. The donor control lungs had no known lung disease, comorbidities, or structural lung injury, and were deemed appropriate for transplantation on review of the clinical files. The diagnosis of IPF in the lungs from patients was established by a multidisciplinary consensus committee according to existing guidelines, and was confirmed by video-assisted thoracic surgical biopsy or by pathological examination of the contralateral lung. The control and IPF groups were matched for age, sex, height, and bodyweight. Samples of lung tissue were compared using the multiresolution imaging approach: a cascade of clinical MDCT, micro-CT, and histological imaging. We did two experiments: in experiment 1, all the lungs were randomly sampled; in experiment 2, samples were selected from regions of minimal and established fibrosis. The patients and donors were recruited from the Katholieke Universiteit Leuven (Leuven, Belgium) and the University of Pennsylvania Hospital (Philadelphia, PA, USA). The study took place at the Katholieke Universiteit Leuven, and the University of British Columbia (Vancouver, BC, Canada).

FINDINGS

Between Oct 5, 2009, and July 22, 2016, explanted lungs from patients with severe IPF (n=11), were compared with a cohort of unused donor (control) lungs (n=10), providing 240 samples of lung tissue for comparison using the multiresolution imaging approach. The MDCT specimen scans show that the number of visible airways located between the ninth generation (control 69 [SD 22] versus patients with IPF 105 [33], p=0·0023) and 14th generation (control 9 [6] versus patients with IPF 49 [28], p<0·0001) of airway branching are increased in patients with IPF, which we show by micro-CT is due to thickening of their walls and distortion of their lumens. The micro-CT analysis showed that compared with healthy (control) lung anatomy (mean 5·6 terminal bronchioles per mL [SD 1·6]), minimal fibrosis in IPF tissue was associated with a 57% loss of the terminal bronchioles (mean 2·4 terminal bronchioles per mL [SD 1·0]; p<0·0001), the appearance of fibroblastic foci, and infiltration of the tissue by inflammatory immune cells capable of forming lymphoid follicles. Established fibrosis in IPF tissue had a similar reduction (66%) in the number of terminal bronchioles (mean 1·9 terminal bronchioles per mL [SD 1·4]; p<0·0001) and was dominated by increased airspace size, Ashcroft fibrosis score, and volume fractions of tissue and collagen.

INTERPRETATION

Small airways disease is a feature of IPF, with significant loss of terminal bronchioles occuring within regions of minimal fibrosis. On the basis of these findings, we postulate that the small airways could become a potential therapeutic target in IPF.

FUNDING

Katholieke Universiteit Leuven, US National Institutes of Health, BC Lung Association, and Genentech.

Comprehensive stereological assessment of the human lung using multiresolution computed tomography

The application of stereology to lung casts and two-dimensional microscopy images is the gold standard for quantification of the human lung anatomy. However, these techniques are labor intensive, involving fixation, embedding, and histological sectioning of samples and thus have prevented comprehensive studies. Our objective was to demonstrate the application of stereology to volumetric multiresolution computed tomography (CT) to efficiently and extensively quantify the human lung anatomy. Nontransplantable donor lungs from individuals with no evidence of respiratory disease (n = 13) were air inflated, frozen at 10 cmH₂O, and scanned using CT. Systematic uniform random samples were taken, scanned using micro-CT, and assessed using stereology. The application of stereology to volumetric CT imaging enabled comprehensive quantification of total lung volume, volume fractions of alveolar, alveolar duct, and tissue, mean linear intercept, alveolar surface area, alveolar surface area density, septal wall thickness, alveolar number, number-weighted mean alveolar volume, and the number and morphometry of terminal and transitional bronchioles. With the use of this data set, we found that women and men have the same number of terminal bronchioles (last generation of conducting airways), but men have longer terminal bronchioles, a smaller wall area percentage, and larger lungs due to a greater number of alveoli per acinus. The application of stereology to multiresolution CT imaging enables comprehensive analysis of the human lung parenchyma that identifies differences between men and women. The reported data set of normal donor lungs aged 25-77 yr provides reference data for future studies of chronic lung disease to determine exact changes in tissue pathology.NEW & NOTEWORTHY Stereology has been the gold standard to quantify the three-dimensional lung anatomy using two-dimensional microscopy images. However, such techniques are labor intensive. This study provides a method that applies stereology to volumetric computed tomography images of frozen whole human lungs and systematic uniform random samples. The method yielded a comprehensive data set on the small airways and parenchymal lung structures, highlighting morphometric sex differences and providing a reference data set for future pathological studies.

X-ray computed tomography in life sciences

Recent developments within micro-computed tomography (μCT) imaging have combined to extend our capacity to image tissue in three (3D) and four (4D) dimensions at micron and sub-micron spatial resolutions, opening the way for virtual histology, live cell imaging, subcellular imaging and correlative microscopy. Pivotal to this has been the development of methods to extend the contrast achievable for soft tissue. Herein, we review the new capabilities within the field of life sciences imaging, and consider how future developments in this field could further benefit the life sciences community.

Transcriptional regulatory model of fibrosis progression in the human lung

To develop a systems biology model of fibrosis progression within the human lung we performed RNA sequencing and microRNA analysis on 95 samples obtained from 10 idiopathic pulmonary fibrosis (IPF) and 6 control lungs. Extent of fibrosis in each sample was assessed by microCT-measured alveolar surface density (ASD) and confirmed by histology. Regulatory gene expression networks were identified using linear mixed-effect models and dynamic regulatory events miner (DREM). Differential gene expression analysis identified a core set of genes increased or decreased before fibrosis was histologically evident that continued to change with advanced fibrosis. DREM generated a systems biology model (www.sb.cs.cmu.edu/IPFReg) that identified progressively divergent gene expression tracks with microRNAs and transcription factors that specifically regulate mild or advanced fibrosis. We confirmed model predictions by demonstrating that expression of POU2AF1, previously unassociated with lung fibrosis but proposed by the model as regulator, is increased in B lymphocytes in IPF lungs and that POU2AF1-knockout mice were protected from bleomycin-induced lung fibrosis. Our results reveal distinct regulation of gene expression changes in IPF tissue that remained structurally normal compared with moderate or advanced fibrosis and suggest distinct regulatory mechanisms for each stage.

Noninvasive Imaging Biomarker Identifies Small Airway Damage in Severe Chronic Obstructive Pulmonary Disease

Rationale: Evidence suggests damage to small airways is a key pathologic lesion in chronic obstructive pulmonary disease (COPD). Computed tomography densitometry has been demonstrated to identify emphysema, but no such studies have been performed linking an imaging metric to small airway abnormality.Objectives: To correlate ex vivo parametric response mapping (PRM) analysis to in vivo lung tissue measurements of patients with severe COPD treated by lung transplantation and control subjects.Methods: Resected lungs were inflated, frozen, and systematically sampled, generating 33 COPD (n = 11 subjects) and 22 control tissue samples (n = 3 subjects) for micro-computed tomography analysis of terminal bronchioles (TBs; last generation of conducting airways) and emphysema.Measurements and Main Results: PRM analysis was conducted to differentiate functional small airways disease (PRMfSAD) from emphysema (PRMEmph). In COPD lungs, TB numbers were reduced (P = 0.01); surviving TBs had increased wall area percentage (P < 0.001), decreased circularity (P < 0.001), reduced cross-sectional luminal area (P < 0.001), and greater airway obstruction (P = 0.008). COPD lungs had increased airspace size (P < 0.001) and decreased alveolar surface area (P < 0.001). Regression analyses demonstrated unique correlations between PRMfSAD and TBs, with decreased circularity (P < 0.001), decreased luminal area (P < 0.001), and complete obstruction (P = 0.008). PRMEmph correlated with increased airspace size (P < 0.001), decreased alveolar surface area (P = 0.003), and fewer alveolar attachments per TB (P = 0.01).Conclusions: PRMfSAD identifies areas of lung tissue with TB loss, luminal narrowing, and obstruction. This is the first confirmation that an imaging biomarker can identify terminal bronchial pathology in established COPD and provides a noninvasive imaging methodology to identify small airway damage in COPD.

Airway morphometry in COPD with bronchiectasis: a view on all airway generations

The pathophysiological processes underlying bronchiectasis in chronic obstructive pulmonary disease (COPD) are not understood. In COPD, both small and large airways are progressively lost. It is currently not known to what extent the different airway generations of patients with COPD and bronchiectasis are involved.

COPD explant lungs with bronchiectasis were compared to COPD explant lungs without bronchiectasis and unused donor lungs as controls. In order to investigate all airway generations, a multimodal imaging approach using different resolutions was conducted. Per group, five lungs were frozen (n=15) and underwent computed tomography (CT) imaging for large airway evaluation, with four tissue cores per lung imaged for measurements of the terminal bronchioles. Two additional lungs per group (n=6) were air-dried for lobar microCT images that allow airway segmentation and three-dimensional quantification of the complete airway tree.

COPD lungs with bronchiectasis had significantly more airways compared to COPD lungs without bronchiectasis (p<0.001), with large airway numbers similar to control lungs. This difference was present in both upper and lower lobes. Lack of tapering was present (p=0.010) and larger diameters were demonstrated in lower lobes with bronchiectasis (p=0.010). MicroCT analysis of tissue cores showed similar reductions of tissue percentage, surface density and number of terminal bronchioles in both COPD groups compared to control lungs.

Although terminal bronchioles were equally reduced in COPD lungs with and without bronchiectasis, significantly more large and small airways were found in COPD lungs with bronchiectasis.

Total Airway Count on Computed Tomography and the Risk of Chronic Obstructive Pulmonary Disease Progression. Findings from a Population-based Study

RATIONALE

Studies of excised lungs show that significant airway attrition in the "quiet" zone occurs early in chronic obstructive pulmonary disease (COPD).

OBJECTIVES

To determine if the total number of airways quantified in vivo using computed tomography (CT) reflects early airway-related disease changes and is associated with lung function decline independent of emphysema in COPD.

METHODS

Participants in the multicenter, population-based, longitudinal CanCOLD (Canadian Chronic Obstructive Lung Disease) study underwent inspiratory/expiratory CT at visit 1; spirometry was performed at four visits over 6 years. Emphysema was quantified as the CT inspiratory low-attenuation areas below -950 Hounsfield units. CT total airway count (TAC) was measured as well as airway inner diameter and wall area using anatomically equivalent airways.

MEASUREMENTS AND MAIN RESULTS

Participants included never-smokers (n = 286), smokers with normal spirometry at risk for COPD (n = 298), Global Initiative for Chronic Obstructive Lung Disease (GOLD) I COPD (n = 361), and GOLD II COPD (n = 239). TAC was significantly reduced by 19% in both GOLD I and GOLD II compared with never-smokers (P < 0.0001) and by 17% in both GOLD I and GOLD II compared with at-risk participants (P < 0.0001) after adjusting for low-attenuation areas below -950 Hounsfield units. Further analysis revealed parent airways with missing daughter branches had reduced inner diameters (P < 0.0001) and thinner walls (P < 0.0001) compared with those without missing daughter branches. Among all CT measures, TAC had the greatest influence on FEV₁ (P < 0.0001), FEV₁/FVC (P < 0.0001), and bronchodilator responsiveness (P < 0.0001). TAC was independently associated with lung function decline (FEV₁, P = 0.02; FEV₁/FVC, P = 0.01).

CONCLUSIONS

TAC may reflect the airway-related disease changes that accumulate in the "quiet" zone in early/mild COPD, indicating that TAC acquired with commercially available software across various CT platforms may be a biomarker to predict accelerated COPD progression.

Pulmonary Acinus: Understanding the Computed Tomography Findings from an Acinar Perspective

The lung acinus is the most distal portion of the airway responsible for the gas exchange. The normal acini are not visible on conventional computed tomography (CT), but the advent of micro-CT improved the understanding of the microarchitecture of healthy acini. The comprehension of the acinar architecture is pivotal for the understanding of CT findings of diseases that involve the acini. Centriacinar emphysema, for example, presents as round areas of low attenuation due to the destruction of the most central acini with compensatory enlargement of proximal acini due to alveolar wall destruction. In pulmonary fibrosis, intralobular septal fibrosis manifests as acinar wall thickening with an overlap of acinar collapse and compensatory dilation of surrounding acini constituting the cystic disease typical of the usual interstitial pneumonia pattern. This is a state-of-the-art review to describe the acinar structure from the micro-CT perspective and display how the comprehension of the acinar structure can aid in the interpretation of its microarchitecture disruption on conventional CT.

3D vessel-wall virtual histology of whole-body perfused mice using a novel heavy element stain

Virtual histology – utilizing high-resolution three-dimensional imaging – is becoming readily available. Micro-computed tomography (micro-CT) is widely available and is often coupled with x-ray attenuating histological stains that mark specific tissue components for 3D virtual histology. In this study we describe a new tri-element x-ray attenuating stain and perfusion protocol that provides micro-CT contrast of the entire vasculature of an intact mouse. The stain – derived from an established histology stain (Verhoeff’s) – is modified to enable perfusion through the vasculature; the attenuating elements of the stain are iodine, aluminum, and iron. After a 30-minute perfusion through the vasculature (10-minute flushing with detergent-containing saline followed by 15-minute perfusion with the stain and a final 5-minute saline flush), animals are scanned using micro-CT. We demonstrate that the new staining protocol enables sharp delineation of the vessel walls in three dimensions over the whole body; corresponding histological analysis verified that the CT stain is localized primarily in the endothelial cells and media of large arteries and the endothelium of smaller vessels, such as the coronaries. The rapid perfusion and scanning protocol ensured that all tissues are available for further analysis via higher resolution CT of smaller sections or traditional histological sectioning.

A role for telomere length and chromosomal damage in idiopathic pulmonary fibrosis

BACKGROUND

Idiopathic pulmonary fibrosis is a fatal lung disease characterized by a progressive formation of fibroblastic foci in the interstitium. This disease is strongly associated with telomere dysfunction but the extent of telomere shortening and consequent chromosomal damage within IPF lungs and with regional disease severity remains unknown.

METHODS

Explanted IPF lungs (n = 10) were collected from transplant surgeries with six samples per lung analysed to capture the regional heterogeneity ranging from mild to severe disease. Non-used donor lungs (n = 6) were collected as "healthy" controls. Structural changes related to disease severity (microCT surface density), relative telomere length (real-time qPCR), and quantitative histology of chromosomal damage (γ-H2A.X) and extracellular matrix (elastin, total collagen, collagen 1, and collagen 3) were measured. A multivariate linear mixed-effects model controlling for subject was used to identify association of disease severity or fibrotic markers with telomere length and chromosomal damage.

RESULTS

We observed shorter telomere length (p = 0.001) and increased chromosomal damage (p = 0.018) in IPF lungs compared to controls. In IPF lungs, telomere length was associated with total collagen (p < 0.001) but not with structural changes of disease severity. Chromosomal damage was positively associated with increased elastin (p = 0.006) and negatively with structural disease severity (p = 0.046). Extensive γ-H2A.X staining was also present in airway epithelial cells.

CONCLUSIONS

Telomere length and chromosomal damage are involved in IPF with regional variation in telomere length and chromosomal damage associated with pathological changes in tissue structure and the extracellular matrix.

Simulation of Airflow in an Idealized Emphysematous Human Acinus

Emphysema is the permanent enlargement of air spaces in the respiratory regions of the lung due to destruction of the inter-alveolar septa. The progressive coalescence of alveoli and alveolar ducts into larger airspaces leads to the disruption of normal airway wall motion and airflow rates within the pulmonary acinus. To contribute to the understanding of the individual effects of emphysema during its earliest stages, computational fluid dynamics (CFD) simulations of airflow in mathematically derived models of the pulmonary acinus were performed. The here generated computational domain consists of two generations of alveolar ducts within the pulmonary acinus, with alveolar geometries approximated as closely packed, 14-sided polygons. Physiologically realistic airflow rates and wall motions were used to study airflow patterns within subsequent generations of alveolar ducts during the inspiratory and expiratory phases of the breathing cycle. The effects of progressive emphysema on the airway wall motion and flow rates were simulated by sequentially removing all alveolar septa within each alveolar duct. Parametric studies were presented to independently assess the relative influence of progressive septal destruction of airway motion and flow rates. The results illustrate that septal destruction lowers the flow resistance through the alveolar ducts but has little influence on the mass transport of oxygen into the alveoli. Septal destruction has a net effect on the flow field by favoring the development of recirculatory flow patterns in individual alveoli.

Analysis of airway pathology in COPD using a combination of computed tomography, micro-computed tomography and histology

The small conducting airways are the major site of obstruction in chronic obstructive pulmonary disease (COPD). This study examined small airway pathology using a novel combination of multidetector row computed tomography (MDCT), micro-computed tomography (microCT) and histology.Airway branches visible on specimen MDCT were counted and the dimensions of the third- to fifth-generation airways were computed, while the terminal bronchioles (designated TB), preterminal bronchioles (TB-1) and pre-preterminal bronchioles (TB-2) were examined with microCT and histology in eight explanted lungs with end-stage COPD and seven unused donor lungs that served as controls.On MDCT, COPD lungs showed a decrease in the number of 2-2.5 mm diameter airways and the lumen area of fifth-generation airways, while on microCT there was a reduction in the number of terminal bronchioles as well as a decrease in the luminal areas, wall volumes and alveolar attachments to the walls of TB, TB-1 and TB-2 bronchioles. The combination of microCT and histology showed increased B-cell infiltration into the walls of TB-1 and TB-2 bronchioles, and this change was correlated with a reduced number of alveolar attachments in COPD.Small airways disease extends from 2 mm diameter airways to the terminal bronchioles in COPD. Destruction of alveolar attachments may be driven by a B-cell-mediated immune response in the preterminal bronchioles.

The cellular and molecular determinants of emphysematous destruction in COPD

The introduction of microCT has made it possible to show that the terminal bronchioles are narrowed and destroyed before the onset of emphysematous destruction in COPD. This report extends those observations to the cellular and molecular level in the centrilobular phenotype of emphysematous destruction in lungs donated by persons with very severe COPD (n = 4) treated by lung transplantation with unused donor lungs (n = 4) serving as controls. These lung specimens provided companion samples to those previously examined by microCT (n = 61) that we examined using quantitative histology (n = 61) and gene expression profiling (n = 48). The histological analysis showed that remodeling and destruction of the bronchiolar and alveolar tissue is associated with macrophage, CD4, CD8, and B cell infiltration with increased formation of tertiary lymphoid organs. Moreover, gene set enrichment analysis showed that genes known to be expressed by natural killer (NK), lymphoid tissue inducer (LTi), and innate lymphoid cell 1 (ILC1) cells, but not ILC2 or ILC3 cells, were enriched in the expression profiles associated with CD4, CD8, and B cell infiltration. Based on these findings, we postulate that the centrilobular phenotype of emphysematous destruction COPD is driven by a Th1 response activated by infiltrating ILC1, NK, and LTi cells.