Stress analysis of occlusal forces in canine teeth and their role in the development of non-carious cervical lesions: abfraction

Development of reduced volume endosseous cuspid tooth implant using topology optimization by SIMP technique for improved osseointegration

The article aims to design and develop a topology-optimized endosseous cuspid tooth implant of the maxilla region. The manuscript presents a numerical analysis of the resulting von Mises stresses and effective strain resulting in the topology-optimized implant with occlusal loading of 110 N. Solid Isotropic Material with Penalization (SIMP) method is employed for topology optimization and four different models, namely model-1, model-2, model-3, and model-4, are developed based on volume reduction rates of 8%, 16%, 24%, and 32%, respectively. FEA results highlight that the maximum stress and strain in the screw increases with volume reduction rates. The comparative analyses of the resulting stresses in the compact and cancellous bone along with the strain in the screw led to the conclusion that model-1, model-2, and model-3 resulted in moderate stresses on compact and cancellous bone compared to the original model of the implant. However, the screw and bones are subjected to maximum stress and strain in the model-4. The study concludes that model-2, with 16% reduced volume and 14.2% reduced mass as compared to the original implant, may be considered as the optimized design of the model. The resulting model offers a significant reduction in the weight and volume with a minor increase in effective stress and strain without negatively impacting the functionality and bio-mechanical performance of the implant. The optimized dental implant prototype is also fabricated as a proof of concept by the Fused Deposition Modelling process.

Numerical Modeling of a New Type of Prosthetic Restoration for Non-Carious Cervical Lesions

The paper considers a new technology for the treatment of non-carious cervical lesions (NCCLs). The three parameterized numerical models of teeth are constructed: without defect, with a V-shaped defect, and after treatment. A new treatment for NCCL has been proposed. Tooth tissues near the NCCLs are subject to degradation. The main idea of the technology is to increase the cavity for the restoration of NCCLs with removal of the affected tissues. The new treatment method also allows the creation of a playground for attaching the gingival margin. The impact of three biomaterials as restorations is studied: CEREC Blocs; Herculite XRV; and Charisma. The models are deformed by a vertical load from the antagonist tooth from 100 to 1000 N. The tooth-inlay system is considered, taking into account the contact interaction. Qualitative patterns of tooth deformation before and after restoration were established for three variants of the inlay material.

Comparative evaluation of transpalatal arch and vertical holding appliance at different heights

Objectives

An effective method for controlling vertical dysplasia remains a concern for orthodontists. This study aims to compare the stresses on the maxillary first molars while changing the height of the loop/acrylic pad of the transpalatal arch (TPA) and vertical holding appliance (VHA) during swallowing using finite element analysis.

Methods

Head and neck computed tomography (CT) of a patient with levelled and aligned maxillary teeth was taken for a three-dimensional reconstruction. Six models comprising the maxilla, molars, and surrounding periodontal ligament (PDL) with different heights of loop/acrylic pads of the appliances were constructed. A force of 112 g/cm2 was applied to the loop/acrylic pads of both appliances to simulate the average tongue pressure. The distribution of von Mises stresses occurring at the PDL due to the tongue pressure was mapped at the cervical area, furcation, distobuccal, mesiobuccal, and palatal root apices. Separately, subjects requiring TPA and VHA at different heights during orthodontic treatment were asked to rate their comfortability with the appliance on the visual analogue scale (VAS).

Results

The VHA demonstrated higher values of stresses at all heights from the palatal floor compared to the corresponding heights of the TPA. The 8 mm model of VHA was found to be functionally effective. This height was also perceived to be acceptable for most patients on the VAS.

Conclusions

The acrylic pad of VHA when kept at a distance of 8 mm from the palatal floor enhances the functional efficiency of the appliance with an acceptable comfortability for the patient.

Scanning electron microscope characterization of noncarious cervical lesions in human teeth

Aims:

Abfraction is a theoretical process whereby occlusal forces create microfractures in enamel and dentin along the cervical area and predispose it to erosion and abrasion, forming noncarious cervical lesions. However, the theory is not yet proven. The aim of this study was to elucidate the role of abfraction as an etiology of these lesions.

Materials and Methods:

Ten human premolars with these lesions from 10 patients requiring tooth extraction, one tooth from each patient, were used in this study. After extractions, all teeth were stored in 10% formalin until required, then prepared routinely for scanning electron microscopy.

Results:

In all 10 teeth, at low magnification, noncarious cervical lesions appeared as crescent-shaped lesions. The upper edges of the lesions were on the enamel surfaces and their lower edges were on the cemental surfaces. In four teeth, the lesions showed evidence of microfractures characterized by the presence of fracture lines and fracture surfaces. In addition, in the first tooth of these teeth, the surface was also covered by a network of poorly fixed collagen fibers. In the third tooth, linear scratches, the openings of the dentinal tubules, a dentin matrix which consisted of a network of poorly fixed collagen fibers, and numerous dentinal tubules were also observed. In the remaining six teeth, they showed linear scratches, and the presence of the dentinal tubules or the exposed collagen fibers.

Conclusions:

It appears that abrasion and erosion are associated etiologic factors in forming noncarious cervical lesions and an ultrastructural finding that supports the abfraction theory of these lesions is observed.

Simulation of orthodontic tooth movement during activation of an innovative design of closing loop using the finite element method

INTRODUCTION

Although many attempts have been made to study the mechanical behavior of closing loops, most have been limited to analyses of the magnitude of forces and moments acting on the end of the closing loop. The objectives of this study were to simulate orthodontic tooth movement during the activation of a newly designed closing loop combined with a gable bend and to investigate the optimal loop activation condition to achieve the desired tooth movement.

METHODS

We constructed a 3-dimensional model of maxillary dentition reproducing the state wherein a looped archwire combined with a gable bend was engaged in brackets and tubes. Orthodontic tooth movements were simulated for both anterior and posterior teeth while varying the degree of gable bend using the finite element method.

RESULTS

The incorporation of a 5° gable bend into the newly designed closing loop produced lingual crown tipping for the central incisor and bodily movement for the first molar. The incorporation of 10° and 15° gable bends produced bodily movement and root movement, respectively, for the central incisor and distal tipping for the first molar.

CONCLUSIONS

Torque control of the anterior teeth and anchorage control of the posterior teeth can be carried out effectively and simply by reducing by half the thickness of a teardrop loop with a height of 10 mm and a 0.019 × 0.025-in cross-section, to a distance of 3 mm from its apex, and by incorporating various degrees of gable bend into the loop corresponding to the treatment plan.

Low-Profile Electromagnetic Field Sensors in the Measurement and Modelling of Three-Dimensional Jaw Kinematics and Occlusal Loading

Dynamic occlusal loading during mastication is clinically relevant in the design and functional assessment of dental restorations and removable dentures, and in evaluating temporomandibular joint dysfunction. The aim of this study was to develop a modelling framework to evaluate subject-specific dynamic occlusal loading during chewing and biting over the entire dental arch. Measurements of jaw motion were performed on one healthy male adult using low-profile electromagnetic field sensors attached to the teeth, and occlusal anatomy quantified using an intra-oral scanner. During testing, the subject chewed and maximally compressed a piece of rubber between both second molars, first molars, premolars and their central incisors. The occlusal anatomy, rubber geometry and experimentally measured rubber material properties were combined in a finite element model. The measured mandibular motion was used to kinematically drive model simulations of chewing and biting of the rubber sample. Three-dimensional dynamic bite forces and contact pressures across the occlusal surfaces were then calculated. Both chewing and biting on the first molars produced the highest bite forces across the dental arch, and a large amount of anterior shear force was produced at the incisors and the second molars. During chewing, the initial tooth-rubber contact evolved from the buccal sides of the molars to the lingual sides at full mouth closure. Low-profile electromagnetic field sensors were shown to provide a clinically relevant measure of jaw kinematics with sufficient accuracy to drive finite element models of occlusal loading during chewing and biting. The modelling framework presented provides a basis for calculation of physiological, dynamic occlusal loading across the dental arch.

Evaluation of the relationship between non-caries cervical lesions and the tooth and periodontal tissue: An ex-vivo study using micro-computed tomography

The purpose of this study was to analyze the relationship between the height and depth of buccal non-carious cervical lesions (NCCLs) and the relationship between the size of buccal NCCLs and clinical crown-root ratio of both buccal and lingual (palatal) sides using micro-computed tomography (micro-CT) images of the teeth and periodontal tissues from the cadavers. The micro-CT images of 56 teeth and their supporting tissues were obtained from 17 cadavers. From these images, the height and depth of NCCLs and the length of the buccal and lingual (palatal) clinical crowns were measured, and the conventional/modified clinical crown-root ratios were calculated. The height and depth ratio of NCCLs were analyzed statistically with the conventional/modified crown-root ratios by Pearson's correlation and multiple regression. According to the Pearson's correlation, the height and depth of buccal NCCLs were positively correlated with the modified buccal clinical crown-root ratio (p < 0.001 and p = 0.013, respectively). The regression model composed of variables of crown-root ratios explained the height of buccal NCCLs, and the prominent factor of the model was the modified buccal clinical crown-root ratio (p < 0.001). Moreover, the depth of buccal NCCLs was also explained by the regression model, and its prominent factor was the proportion of modified buccal and lingual (palatal) clinical crowns (p = 0.004). The buccal NCCLs were related to the crown-root ratios; particularly, the level of buccal gingival margin could be associated with the formation of buccal NCCLs.

Association of Non-Carious Cervical Lesions with Oral Hygiene Habits and Dynamic Occlusal Parameters

Dentists routinely encounter non-carious cervical lesions (NCCLs) in daily clinical practices. The dental literature is contradictory regarding the occlusal etiology of NCCLs. NCCL is defined as the loss of dental structure at the cemento-enamel junction, with no association of bacteria. The aim of this study was to evaluate the association of dynamic occlusal factors and dental hygiene practices with NCCLs. In total, 100 participants were selected by the random stratified sampling method, 50 each for control and NCCL groups. Information regarding oral hygiene practices, including frequency, duration, force, and technique of brushing, was recorded. Dynamic occlusal parameters like initial contact, occlusion time (OT), disocclusion time (DT), and center of force were recorded with T-scan analysis. The obtained data were analyzed with Pearson's correlation and binary logistic regression. We found that 68% of participants in the NCCL group and 31% in the control group utilized the horizontal brushing technique; 46% of NCCL group participants used hard brush against 7% of participants in the control group. The mean OT was 0.727 and 0.516 s for NCCL and control groups, respectively. The OT and left and right lateral DT were strongly related to NCCL, with r-values of 0.661, 0.642, and 0.534, respectively, with p ≤ 0.001. Using a hard toothbrush was found to be associated with NCCL. The NCCL group had extended mean occlusion time and disocclusion time in all eccentric mandibular movements.

Stress-strain Analysis of Premolars With Non-carious Cervical Lesions: Influence of Restorative Material, Loading Direction and Mechanical Fatigue

Noncarious cervical lesions (NCCLs) are characterized by a loss of dental structure at the cementoenamel junction (CEJ) caused by stress, biocorrosion, and attrition. Variations in occlusal loading can promote different stress and strain patterns on the CEJ. Restoration of NCCLs is part of lesion management; however, there is still no conclusive restorative protocol for NCCLs. This study aimed to evaluate the stress and strain distribution of maxillary premolars with NCCLs according to three factors: 1) restorative technique; 2) direction of occlusal loading; and 3) mechanical fatigue. Three-dimensional (3D) finite element analysis (FEA) and strain gauge testing were used to assess stress and strain, respectively. 3D-FEA orthotropic, linear, and elastic models were generated: sound tooth (SO); unrestored NCCL; or NCCL restored with glass ionomer; flowable composite resin; nanofilled composite resin (CR); lithium disilicate ceramic; and nanofilled composite resin core associated with a lithium disilicate laminate (CL). A 150-N compressive static load was applied in two conditions: axially in both cusps (Al); and at a 45° angle to the long axis of the tooth applied to the palatine cusp (Ol). For the experimental tests, specimens were treated as described previously, and one strain gauge was attached to the buccal surface of each tooth to record tooth strains before and after cyclic loading (200,000 cycles, 50 N). FEA showed that the association of NCCL and Ol resulted in higher stress values. CR and CL restorations showed the closest biomechanical behavior to SO for both loading types. Loaded Al or Ol specimens showed higher strain values after mechanical fatigue. Lower stress and strain were observed with Al when compared with Ol. The restoration of NCCLs with composite resin only or associated with ceramic laminates seems to be the best approach because the results for those groups were similar in biomechanical behaviors to sound teeth.

Biomechanics of cervical tooth region and noncarious cervical lesions of different morphology; three-dimensional finite element analysis

OBJECTIVE

The present study aims to investigate the influence of presence and shape of cervical lesions on biomechanical behavior of mandibular first premolar, subjected to two types of occlusal loading using three-dimensional (3D) finite element method (FEM).

MATERIALS AND METHODS

3D models of the mandibular premolar are created from a micro computed tomography X-ray image: model of sound mandibular premolar, model with the wedge-shaped cervical lesion (V lesion), and model with saucer-shaped cervical lesion (U lesion). By FEM, straining of the tooth tissues under functional and nonfunctional occlusal loading of 200 (N) is analyzed. For the analysis, the following software was used: CTAn program 1.10 and ANSYS Workbench (version 14.0). The results are presented in von Mises stress.

RESULTS

Values of calculated stress in all tooth structures are higher under nonfunctional occlusal loading, while the functional loading is resulted in homogeneous stress distribution. Nonfunctional load in the cervical area of sound tooth model as well as in the sub-superficial layer of the enamel resulted with a significant stress (over 50 [MPa]). The highest stress concentration on models with lesions is noticed on the apex of the V-shaped lesion, while stress in saucer U lesion is significantly lower and distributed over wider area.

CONCLUSION

The type of the occlusal teeth loading has the biggest influence on cervical stress intensity. Geometric shape of the existing lesion is very important in the distribution of internal stress. Compared to the U-shaped lesions, V-shaped lesions show significantly higher stress concentrations under load. Exposure to stress would lead to its progression.

Analysis of the abfraction lesions formation mechanism by the finite element method

Introduction:

An abfraction lesion is a type of a non-carious cervical lesion (NCCL) that represents a sharp defect on the cervical part of tooth, caused by occlusal biomechanical forces. The largest prevalence of the NCCL is found on the mandibular first premolar. The goal of the study is, by means of a numerical method – the finite element method (FEM), in an appropriate computer program, conduct a stress analysis of the mandibular premolar under various static loads, with a special reference to the biomechanics of cervical tooth region.

Material and methods:

A three-dimensional model of the mandibular premolar is gained from a µCT x-ray image. By using the FEM, straining of the enamel, dentin, peridontal ligament and alveolar bone under axial and paraxial forces of 200 [N] is analyzed. The following software were used in the analysis: CT images processing–CTAn program and FEM analysis–AnsysWorkbench 14.0.

Results:

According to results obtained through the FEM method, the calculated stress is higher with eccentric forces within all tested tooth tissue. The occlusal load leads to a significant stress in the cervical tooth area, especially in the sub-superficial layer of the enamel (over 50 MPa). The measured stress in the peridontal ligament is approximately three times higher under paraxial load with regard to the axial load, while stress calculated in the alveolar bone under paraxial load is almost ten times higher with regard to the axial load. The highest stress values were calculated in the cervical part of the alveoli, where bone resorption is most commonly seen.

Conclusion:

Action of occlusal forces, especially paraxial ones, leads to significant stress in the cervical part of tooth. The stress values in the cervical sub-superficial enamel layer are almost 5 times higher in relation to the superficial enamel, which additionally confirms complexity of biomechanical processes in the creation of abfraction lesions.

Abfraction: A review

Abfraction (AF) is the pathological loss of tooth substance caused by biomechanical loading forces that result in flexure and failure of enamel and dentin at a location away from the loading. The theory of AF is based primarily on engineering analyses that demonstrate theoretical stress concentration at the cervical areas of the teeth. However, the theory is not yet proven and there are explanations against it. AF lesions present primarily at the cervical region of the dentition and are typically wedge-shaped, with sharp internal and external line angles. Diagnosis of AF plays a very important role in the management of patients. The aim of the present narrative review is to comprehensively discuss the historical, etiopathogenetic, clinical, and diagnostic and treatment aspects of AF.

Dental application of novel finite element analysis software for three-dimensional finite element modeling of a dentulous mandible from its computed tomography images

This study focused on the application of novel finite-element analysis software for constructing a finite-element model from the computed tomography data of a human dentulous mandible. The finite-element model is necessary for evaluating the mechanical response of the alveolar part of the mandible, resulting from occlusal force applied to the teeth during biting. Commercially available patient-specific general computed tomography–based finite-element analysis software was solely applied to the finite-element analysis for the extraction of computed tomography data. The mandibular bone with teeth was extracted from the original images. Both the enamel and the dentin were extracted after image processing, and the periodontal ligament was created from the segmented dentin. The constructed finite-element model was reasonably accurate using a total of 234,644 nodes and 1,268,784 tetrahedral and 40,665 shell elements. The elastic moduli of the heterogeneous mandibular bone were determined from the bone density data of the computed tomography images. The results suggested that the software applied in this study is both useful and powerful for creating a more accurate three-dimensional finite-element model of a dentulous mandible from the computed tomography data without the need for any other software.

Five-year clinical performance of a HEMA-free one-step self-etch adhesive in noncarious cervical lesions

OBJECTIVES

The objective of this randomized controlled trial was to evaluate the clinical performance of a 2-hydroxyethyl methacrylate (HEMA)-free one-step adhesive.

MATERIALS AND METHODS

Two hundred sixty-seven cervical lesions in 52 patients were restored with the composite Gradia Direct (GC), bonded with either the one-step self-etch adhesive G-Bond (GC) or the three-step etch-and-rinse adhesive Optibond FL (Kerr) in a random order. The restorations were evaluated for retention, marginal integrity, marginal discoloration, and caries occurrence after 5 years. Specific statistics were used to account for the clustered data (multiple restorations per patient).

RESULTS

The clinical success rate for G-Bond (87.4 %) was not significantly different from that of Optibond FL (90.9 %). Both adhesives showed progressive marginal deterioration, but G-Bond exhibited more small enamel defects and marginal discoloration, and unlike previous recalls, several restorations failed because of deep microleakage. Large sclerotic lesions were a significant risk factor for retention loss with G-Bond. Irrespective of the adhesive, almost all restorations with retention loss were located in the lower jaw.

CONCLUSION

After 5 years of clinical service, restorations bonded with the HEMA-free one-step adhesive did not need repair or replacement more often than those with the three-step etch-and-rinse adhesive, and both adhesives had a high retention rate (>90 %). There were indications that G-Bond did not (self-)etch enough in some clinical situations, as G-Bond exhibited more incisal defects and marginal discolorations, and sclerotic lesions were at higher risk of retention loss.

CLINICAL RELEVANCE

The clinical performance of the HEMA-free one-step adhesive was clinically acceptable after 5 years.

Simulation of temperature and thermally induced stress of human tooth under CO2 pulsed laser beams using finite element method

The authors report the simulation of temperature distribution and thermally induced stresses of human tooth under CO2 pulsed laser beam. A detailed tooth structure comprising enamel, dentin, and pulp with realistic shapes and thicknesses were considered, and a numerical method of finite element was adopted to solve time-dependent bio-heat and stress equations. The realistic boundary conditions of constant temperature for those parts embedded in the gingiva and heat flux condition for those parts out of the gingiva were applied. The results which were achieved as a function of energy density (J/cm(2)) showed when laser beam is irradiated downward (from the top of the tooth), the temperature and thermal stresses decrease quickly as a function of depth that is a result of strong absorption of CO2 beams by enamel. This effect is so influential that one can use CO2 beams to remove micrometer layers while underlying tissues, especially the pulp, are safe from thermal effects.

Hydrodynamic Flow through Loading and in vitro Secondary Caries Development

This in vitro study investigated the effect of hydrodynamic flow through mechanical loading on development of secondary caries lesions. Forty-eight bovine tooth specimens (enamel and dentin; sizes 3.2 x 3.2 x 2.0 mm) were restored with resin-composite on polystyrene bars; 18 samples were bonded, and 30 were not bonded. Specimens were suspended in a lactic acid solution (pH = 5; 14 days) in a modified brushing machine, and artificial caries lesions were formed. During caries development, specimens were mechanically loaded at the surface of the polystyrene bar, bent so that the tooth- composite interfaces were subjected to opening forces (16x/min). Loads applied were either none (Control Bonded, CB, n = 6; and Control Non-bonded, CNB, n = 6), 200 gr (NB200, n = 12), or 350 gr (NB350 and B350, both n = 12). Before and after caries development, specimens were imaged with transverse wavelength-independent microradiography (T-WIM), and lesion depth (LD) and mineral loss (ML) were calculated at 4 different locations. An independent t test was used to compare the LD and ML at the 4 different locations. A statistically significant effect of the level of loading (comparing groups NB200 and NB350) and of bonding (comparing groups NB350 and B350) could be observed, with a higher load and absence of bonding leading to more advanced lesions.