Anaerobic ammonium oxidation: from laboratory to full-scale application

Enhanced nitrogen removal of the anaerobic ammonia oxidation process by coupling with an efficient nitrate reducing bacterium (Bacillus velezensis M3-1)

Bacillus velezensis M3-1 strain isolated from the sediment of Myriophyllum aquatium constructed wetlands was found to efficiently convert NO3--N to NO2--N, and the requirements for carbon source addition were not very rigorous. This work demonstrates, for the first time, the feasibility of using the synergy of anammox and Bacillus velezensis M3-1 microorganisms for nitrogen removal. In this study, the possibility of M3-1 that converted NO3--N produced by anammox to NO2--N was verified in an anaerobic reactor. The NO3--N reduction ability of M3-1 and denitrifying bacteria in coupling system was investigated under different C/N conditions, and it was found that M3-1 used carbon sources preferentially over denitrifying bacteria. By adjusting the ratio of NH4+-N to NO2--N, it was found that the NO2--N converted from NO3--N by M3-1 participated in the original anammox.The nitrogen removal efficacy (NRE) of the coupled system was increased by 12.1%, compared to the control group anammox system at C/N = 2:1. Functional gene indicated that it might be a nitrate reducing bacterium.This study shows that the nitrate reduction rate achieved by the Bacillus velezensis M3-1 can be high enough for removing nitrate produced by anammox process, which would enable improve nitrogen removal from wastewater.

Synergistic Integration of Anammox and Endogenous Denitrification Processes for the Simultaneous Carbon, Nitrogen, and Phosphorus Removal

The feasibility of a synergistic endogenous partial denitrification-phosphorus removal coupled anammox (SEPD-PR/A) system was investigated in a modified anaerobic baffled reactor (mABR) for synchronous carbon, nitrogen, and phosphorus removal. The mABR comprising four identical compartments (i.e., C1-C4) was inoculated with precultured denitrifying glycogen-accumulating organisms (DGAOs), denitrifying polyphosphate-accumulating organisms, and anammox bacteria. After 136 days of operation, the chemical oxygen demand (COD), total nitrogen, and phosphorus removal efficiencies reached 88.6 ± 1.0, 97.2 ± 1.5, and 89.1 ± 4.2%, respectively. Network-based analysis revealed that the biofilmed community demonstrated stable nutrient removal performance under oligotrophic conditions in C4. The metagenome-assembled genomes (MAGs) such as MAG106, MAG127, MAG52, and MAG37 annotated as denitrifying phosphorus-accumulating organisms (DPAOs) and MAG146 as a DGAO were dominated in C1 and C2 and contributed to 89.2% of COD consumption. MAG54 and MAG16 annotated as Candidatus_Brocadia (total relative abundance of 16.5% in C3 and 4.3% in C4) were responsible for 74.4% of the total nitrogen removal through the anammox-mediated pathway. Functional gene analysis based on metagenomic sequencing confirmed that different compartments of the mABR were capable of performing distinct functions with specific advantageous microbial groups, facilitating targeted nutrient removal. Additionally, under oligotrophic conditions, the activity of the anammox bacteria-related genes of hzs was higher compared to that of hdh. Thus, an innovative method for the treatment of low-strength municipal and nitrate-containing wastewaters without aeration was presented, mediated by an anammox process with less land area and excellent quality effluent.

Micro-aeration and low influent C/N are key environmental factors for achieving ANAMMOX in livestock farming wastewater treatment plants

Anaerobic ammonium oxidation (ANAMMOX)-mediated system is a cost-effective green nitrogen removal process. However, there are few examples of successful application of this advanced wastewater denitrification process in wastewater treatment plants, and the understanding of how to implement anaerobic ammonia oxidation process in full-scale is still limited. In this study, it was found that the abundance of anaerobic ammonia-oxidizing bacteria (AnAOB) in the two livestock wastewater plants named J1 and J2, respectively, showed diametrically opposed trends of waxing and waning with time. The microbial communities of the activated sludge in the two plants at different time were sampled and analyzed by high-throughput sequencing of 16S rRNA genes. Structural equation models (SEMs) were used to reveal the key factors affecting the realization of the ANAMMOX. Changes in the concentration of dissolved oxygen and C/N had a significant effect on the relative abundance of anaerobic ammonia oxidation bacteria (AnAOB). The low concentration of DO (0.2∼0.5 mg/L) could inhibit the activity of nitrifying bacteria (NOB) to achieve partial oxidation of ammonia nitrogen and provide sufficient substrate for the growth of AnAOB, similar to the CANON (Completely Autotrophic Nitrogen removal Over Nitrite). Unlike CANON, heterotrophic denitrification is also a particularly critical part of the livestock wastewater treatment, and a suitable C/N of about 0.6 could reduce the competition risk of heterotrophic microorganisms to AnAOB and ensure a good ecological niche for AnAOB. Based on the results of 16S rRNA and microbial co-occurrence networks, it was discovered that microorganisms in the sludge not only had a richer network interaction, but also achieved a mutually beneficial symbiotic interaction network among denitrifying bacteria (Pseudomonas sp., Terrimonas sp., Dokdonella sp.), AnAOB (Candidatus Brocadia sp.) at DO of 0.2∼0.5 mg/L and C/N of 0.6. Among the top 20 in abundance of genus level, AnAOB had a high relative abundance of 27.66%, followed by denitrifying bacteria of 3.67%, AOB of 0.64% and NOB of 0.26%, which is an essential indicator for the emergence of an AnAOB-dominated nitrogen removal cycle. In conclusion, this study highlights the importance of dissolved oxygen and C/N regulation by analyzing the mechanism of ANAMMOX sludge extinction and growth in two plants under anthropogenic regulation of AnAOB in full-scale wastewater treatment systems.

Sustainable nitrogen removal in anammox-mediated systems: Microbial metabolic pathways, operational conditions and mathematical modelling

Anammox-mediated systems have attracted considerable attention as alternative cost-effective technologies for sustainable nitrogen (N) removal from wastewater. This review comprehensively highlights the importance of understanding microbial metabolism in anammox-mediated systems under crucial operation parameters, indicating the potentially wide applications for the sustainable treatment of N-containing wastewater. The partial nitrification-anammox (PN-A), simultaneous PN-A and denitrification (SNAD) processes have demonstrated sustainable N removal from sidestream wastewater. The partial denitrification-anammox (PD-A) and denitrifying anaerobic methane oxidation-anammox (DAMO-A) processes have advanced sustainable N removal efficiency in mainstream wastewater treatment. Moreover, N2O production/emission hotspots are extensively discussed in anammox-based processes and are related to the dominant ammonia-oxidizing bacteria (AOB) and denitrifying heterotrophs. In contrast, N2O is not produced in the metabolism pathways of AnAOB and DAMO-archaea; Moreover, the actual contribution of N2O production by dissimilatory nitrate reduction to ammonium (DNRA) and DAMO-bacteria in their species remains uncertain. Thus, PD-A and DAMO-A processes would achieve reduction in greenhouse gas production, as well as energy consumption for the reliability of N removal efficiencies. In addition to reaction mechanisms, this review covers the mathematical models for simultaneous anammox, partial nitrification and/or denitrification (i.e., PN-A, PD-A, and SNAD). Promising NO3- reduction technologies by endogenous PD, sulfur-driven autotrophic denitrification, and DNRA by anammox are also discussed. In summary, this review provides a better understanding of sustainable N removal in anammox-mediated systems, thereby encouraging future investigation and exploration of the sustainable N bio-treatment from wastewater.

Microbial response mechanism of plants and zero valent iron in ecological floating bed: Synchronous nitrogen, phosphorus removal and greenhouse gas emission reduction

Iron-based ecological floating beds (EFBs) are often used to treat the secondary effluent from wastewater treatment plant to enhance the denitrification process. However, the impact and necessity of plants on iron-based EFBs have not been systematically studied. In this research, two iron-based EFBs with and without plants (EFB-P and EFB) were performed to investigate the response of plants on nutrient removal, GHG emissions, microbial communities and functional genes. Results showed the total nitrogen and total phosphorus removal in EFB-P was 45-79% and 48-72%, respectively, while that in EFB was 31-67% and 44-57%. Meanwhile, plants could decrease CH₄ emission flux (0-3.89 mg m^-2 d^-1) and improve CO₂ absorption (4704-22321 mg m^-2 d^-1). Plants could increase the abundance of Nitrosospira to 1.6% which was a kind of nitrifying bacteria dominant in plant rhizosphere. Among all denitrification related genera, Simplicispira (13.08%) and Novosphingobium (6.25%) accounted for the highest proportion of plant rhizosphere and iron scrap, respectively. Anammox bacteria such as Candidatus_Brocadia was more enriched on iron scraps with the highest proportion was 1.21% in EFB-P, and 2.20% in EFB. Principal co-ordinates analysis showed that plants were the critical factor determining microbial community composition. TN removal pathways were mixotrophic denitrification and anammox in EFB-P while TP removal pathways were plant uptake and phosphorus-iron coprecipitation. In general, plants play an important directly or indirectly role in iron-based EFBs systems, which could not only improve nutrients removal, but also minimize the global warming potential and alleviate the greenhouse effect to a certain extent.

Ecological Aerobic Ammonia and Methane Oxidation Involved Key Metal Compounds, Fe and Cu

Interactions between metals and microbes are critical in geomicrobiology and vital in microbial ecophysiological processes. Methane-oxidizing bacteria (MOB) and ammonia-oxidizing microorganisms (AOM) are key members in aerobic environments to start the C and N cycles. Ammonia and methane are firstly oxidized by copper-binding metalloproteins, monooxygenases, and diverse iron and copper-containing enzymes that contribute to electron transportation in the energy gain pathway, which is evolutionally connected between MOB and AOM. In this review, we summarized recently updated insight into the diverse physiological pathway of aerobic ammonia and methane oxidation of different MOB and AOM groups and compared the metabolic diversity mediated by different metalloenzymes. The elevation of iron and copper concentrations in ecosystems would be critical in the activity and growth of MOB and AOM, the outcome of which can eventually influence the global C and N cycles. Therefore, we also described the impact of various concentrations of metal compounds on the physiology of MOB and AOM. This review study could give a fundamental strategy to control MOB and AOM in diverse ecosystems because they are significantly related to climate change, eutrophication, and the remediation of contaminated sites for detoxifying pollutants.

Advanced nitrogen removal from municipal sewage via partial nitrification-anammox process under two typical operation modes and seasonal ambient temperatures

A novel two-stage partial nitrification-anammox (PN-A) process was developed, achieving nitrogen removal from low carbon/nitrogen ratio municipal sewage under two typical operational modes and seasonal ambient temperatures. When complete nitritation-anammox was performed at temperatures greater than 19.4 °C, the effluent concentration of total inorganic nitrogen (TIN) was 4.1 mg/L, corresponding to a nitrogen removal efficiency (NRE) of 94.3 %. In contrast, when partial nitritation-anammox was performed at temperatures below 19.4 °C, the effluent TIN was 12.3 mg/L, corresponding to a NRE of 83.6 %. The relative abundance of Nitrosomonas and Nitrosomonadaceae increased from 0.02 % to 0.28 %, while Ca. Brocadia decreased from 1.85 % to 1.30 %, with the contribution of anammox to nitrogen removal being highest under low temperatures (19.4℃ to 13.8℃), at 59.0 %. This novel two-stage PN-A process provides a new approach for the stable operation of wastewater treatment plants (WWTPs) under low ambient temperatures.

Enrichment of Ca. Jettenia in sequencing batch reactors operated with low nitrogen loading rate and high influent nitrogen concentration

To apply the anammox processes into the mainstream of domestic wastewater treatment plants, two laboratory-scale sequence batch reactors have been developed and used with two different activated sludges seeded in each sequence batch reactors with gradually increases influent total nitrogen concentrations under low nitrogen loading rates. During 320 days of operation, both sequence batch reactors showed high specific anammox activity (0.68 - 0.75 kgN kg^-1VSS d^-1) and a nitrogen removal efficiency of 97.50%. To monitor changes in microbial community dynamics during enrichment, high-throughput sequencing analysis was performed. Members taxonomically affiliated with Candidatus Jettenia were markedly enriched and predominant in both sequence batch reactors in response to the increasing influent total nitrogen concentrations. These results suggest that Candidatus Jettenia might be a prominent anammox genus under low nitrogen loading rate with high total nitrogen concentration conditions and could be suitably applied to the mainstream process of domestic wastewater treatment systems.

Microbial diversity reveals the partial denitrification-anammox process serves as a new pathway in the first mainstream anammox plant

A full-scale sewage treatment plant in Xi'an city is discovered as the first mainstream anaerobic ammonia oxidation (anammox) treatment process in China. Whether its biological mechanism is the nitritation-anammox or partial denitrification (PD)-anammox brought violent controversy between two groups. As a third party, here we uncovered the mystery of the moving-bed biofilm reactor (MBBR) as a PD-anammox process by analyzing the diversity and phylogenetic investigation of communities by reconstruction of unobserved states (PICRUSt) of microbes in anoxic pond. Anammox bacteria was found in the MBBR anoxic tank, which abundance is 8.9 times of that in the common anaerobic-anoxic-oxic process, confirming the existence of anammox process. The denitrifying bacteria (DNB) content in the anoxic tank is 5.9 times of the content of ammonia oxidizing bacteria (AOB), thus the DNB-anammox system is proved at the microbial composition level. The PICRUSt analysis found that ammonium nitrogen is mainly derived from the deamination of urea. The functional genes NAR and AMO of DNB and AOB are 910.84 and 5.80 rpms, respectively. The NAR gene content is 157.0 times of the AMO gene content and it is proved at the genetic level that the nitrite in the anoxic pool is mainly derived from denitrification. This study demonstrated the feasibility and advantages of the PD-anammox in the anammox process, which is different from the traditional nitritation-anammox demonstrated in Strass Wastewater Treatment Plant, Austria and Changi Water Reclamation Plant, Singapore and provided an alternative option for the mainstream application of anammox.

A critical review on the effects of antibiotics on anammox process in wastewater

Anaerobic ammonium oxidation (anammox) has recently become of significant interest due to its capability for cost-effective nitrogen elimination from wastewater. However, anaerobic ammonia-oxidizing bacteria (AnAOB) are sensitive to environmental changes and toxic substances. In particular, the presence of antibiotics in wastewater, which is considered unfavorable to the anammox process, has become a growing concern. Therefore, it is necessary to evaluate the effects of these inhibitors to acquire information on the applicability of the anammox process. Hence, this review summarizes our knowledge of the effects of commonly detected antibiotics in water matrices, including fluoroquinolone, macrolide, β-lactam, chloramphenicol, tetracycline, sulfonamide, glycopeptide, and aminoglycoside, on the anammox process. According to the literature, the presence of antibiotics in wastewater could partially or completely inhibit anammox reactions, in which antibiotics targeting protein synthesis or DNA replication (excluding aminoglycoside) were the most effective against the AnAOB strains.

Beyond Energy Balance: Environmental Trade-Offs of Organics Capture and Low Carbon-to-Nitrogen Ratio Sewage Treatment Systems

Several life-cycle assessments (LCAs) have evaluated the environmental impacts (EIs) of different wastewater treatment (WWT) configurations, attempting resource recovery and energy efficiency. However, a plant-wide LCA considering up-concentration primary treatment and low carbon-to-nitrogen (C/N) ratio sewage at the secondary biological treatment (SBT) has not yet been conducted. This study identifies the environmental trade-offs and hotspots for the chemically enhanced primary treatment (CEPT) and low C/N ratio SBT emerging processes compared to conventional WWT. The life-cycle inventories were calculated using a stoichiometric life-cycle inventory framework that couples stoichiometry and kinetics to obtain site-specific water, air, and soil emissions. The midpoint results of LCA show that CEPT with anaerobic digestion (AD) for sludge treatment achieves energy self-sufficiency, but increases marine eutrophication (MEu) by 1 order of magnitude compared to conventional WWT. A mainstream anaerobic fluidized-bed bioreactor and a partial nitritation-anammox fluidized-bed membrane bioreactor which can reduce all environmental impacts by 17-47%, including MEu, are proposed as the SBT of the low-carbon CEPT settled sewage. Integrating the standardized S-LCI framework resulted in a site-specific LCA that aids decision-makers on choosing between higher reductions in most EIs at the expense of high MEu or less but consistent reductions in all EI categories.

Anammox-based processes: How far have we come and what work remains? A review by bibliometric analysis

Nitrogen contamination remains a severe environmental problem and a major threat to sustainable development worldwide. A systematic analysis of the literature indicates that the partial nitritation-anammox (PN/AMX) process is still actively studied as a viable option for energy-efficient and feasible technology for the sustainable treatment of N- rich wastewaters, since its initial discovery in 1990. Notably, the mainstream PN/AMX process application remains the most challenging bottleneck in AMX technology and fascinates the world's attention in AMX studies. This paper discusses the recent trends and developments of PN/AMX research and analyzes the results of recent years of research on the PN/AMX from lab-to full-scale applications. The findings would deeply improve our understanding of the major challenges under mainstream conditions and next-stage research on the PN/AMX process. A great deal of efforts has been made in the process engineering, PN/AMX bacteria populations, predictive modeling, and the full-scale implementations during the past 22 years. A series of new and excellent experimental findings at lab, pilot and full-scale levels including good nitrogen removal performance even under low temperature (15-10 °C) around the world were achieved. To date, pilot- and full-scale PN/AMX have been successfully used to treat different types of industrial sewage, including black wastewater, sludge digester liquids, landfill leachate, monosodium glutamate wastewater, etc. Supplementing the qualitative analysis, this review also provides a quantitative bibliometrics study and evaluates global perspectives on PN/AMX research published during the past 22 years. Finally, general trends in the development of PN/AMX research are summarized with the aim of conveying potential future trajectories. The current review offers a valuable orientation and global overview for scientists, engineers, readers and decision makers presently focusing on PN/AMX processes.

An innovative strategy for inducing Anammox from partial nitrification process in a membrane bioreactor

Anaerobic ammonium oxidation (Anammox) was an innovative process for nitrogen removal. In this study, CuO nanoparticles (NPs) was step-wise increasingly added to an MBR-based partial nitrification system, to investigate its feasibility for inducing Anammox and establishing autotrophic nitrogen removal system. Results showed that when CuO NPs was elevated to 5 mg L^-1, Anammox was successfully induced. The relative abundance of Nitrosomonas reached 13.73% while Candidatus Kuenenia increased to 4.79% from 0.46%, these two bacteria cooperatively contributed to the autotrophic nitrogen removal and improved the nitrogen removal rate (NRR) to 0.56 kg m^-3 d^-1 in 20 mg L^-1 NPs. However, 50 mg L^-1 NPs deeply suppressed the functional bacteria and decreased NRR to 0.14 kg m^-3 d^-1. Finally, the NPs removal, transformation and adsorption in the system were evaluated. It was concluded that CuO NPs in low concentration (5 mg L^-1) was effective for inducing Anammox and contributed to the survival of Anammox bacteria. The mechanism for inducing Anammox was attributed to the aggregation of CuO NPs which enabled the attached growth of AAOB as well as the suitable survival condition supplied by MBR.

Sources of anammox granular sludge and their sustainability in treating low-strength wastewater

Anaerobic ammonium oxidation (anammox) has been widely applied in the treatment of high-strength nitrogen wastewaters. However, few engineering practices were reported to treat low-strength nitrogen wastewaters. In this study, three types of anammox granular sludge (GS) were separately collected from the expanded granular sludge bed (EGSB) reactors treating nitrogen wastewaters at high (H-), moderate (M-) and low (L-) nitrogen loading rates (NLRs), and employed for the treatment of low-strength nitrogen wastewater in sequencing batch advanced nitrogen removal (ANR) systems. The ANR system with M-GS (namely M-ANR system) was most useful. At the initial biomass concentration of 2.43 g-VSS·L^-1, cycle length of 8 h and influent total nitrogen (TN) concentration of less than 15 mg·L^-1, the performance data were as follows: effluent TN of less than 1 mg·L^-1, TN removal efficiency of more than 92.8%, the nitrogen removal rate (NRR) of 0.039 kg-N·m^-3·d^-1. The efficient performance lasted as long as 46 cycles, indicating the sustainability of the M-ANR system. The advanced microscopic analysis and metagenomic analysis were applied to reveal the successful but non-permanent treatment by the M-ANR system. The long-time lag between biomass decay and sludge activity decay provided a window period for the good performance of M-ANR system. However, the weak support of oligotrophic habitat for anaerobic ammonium oxidizing bacteria community was doomed to the degradation of anammox GS, resulting in gradual loss of their activities. A periodic addition of fresh M-GS or a periodic rejuvenation cultivation in the eutrophic habitat is necessary to achieve a permanent performance.

Microbial community dynamics in an ANAMMOX reactor for piggery wastewater treatment with startup, raising nitrogen load, and stable performance

Bacterial community dynamics of the ANAMMOX reactor of an integrated “UASB + SHARON + ANAMMOX” system for treating piggery wastewater were investigated using the Illumina MiSeq method with samples obtained at ~ 2-week intervals during a 314-day period. With aerobic activated sludge as seeds and low content artificial wastewater (NH₄⁺–N 50 mg/L; NO₂⁻–N 55 mg/L) as influent for the ANAMMOX reactor, nitrogen removal was initially observed on day 38 with a removal rate 1.3 mg N L⁻¹ day⁻¹, and increased to 90.4 mg N L⁻¹ day⁻¹ on day 55 with almost complete removal of ammonia and nitrite, indicating a successful startup of the reactor. Increasing influent load stepwise to NH₄⁺–N 272.7 mg/L/NO₂⁻–N 300 mg/L, nitrogen removal rate increased gradually to 470 mg N L⁻¹ day⁻¹ on day 228, and maintained a stable level (~ 420 mg N L⁻¹ day⁻¹) following introduction of SHARON effluent since day 229. Correlation between microbial community dynamics and nitrogen removal capability was significant (r = 0.489, p < 0.001). Microbial community composition was determined by influent ammonia, influent nitrite, effluent nitrate and some undefined factors. Anammox bacteria, accounting for ~ 98.7% of Planctomycetes, became detectable (0.03% relative abundance) since day 38 and increased to 0.9% on day 58, well consistent with nitrogen removal performance of the reactor. Relative abundance of anammox bacteria gradually increased to 38.4% on day 140 with stepwise increased influent load; decreased to 0.4% on day 169 because of nitrite inhibition; increased to 19.24% on day 233 when the influent load was dropped; kept at ~ 9.0% with SHARON effluent used as influent and dropped to 3.3% finally. Anammox bacteria, only Candidatus Brocadia and Ca. Kuenenia detected, were the most abundant at genus level. Ca. Brocadia related taxa were enriched firstly under low load and detectable during the entire experimental period. Three main groups represented by Ca. Brocadia related OTUs were enriched or eliminated at different loads, but Ca. Kuenenia related taxa were enriched only under high load (NO₂⁻–N > 300 mg/L), suggesting their different niches and application for different loads. These findings improve the understanding of relationships among microbial community/functional taxa, running parameters and reactor performance, and will be useful in optimizing running parameters for rapid startup and high, stable efficiency.

Bacterial community evolutions driven by organic matter and powder activated carbon in simultaneous anammox and denitrification (SAD) process

A distinct shift of bacterial community driven by organic matter (OM) and powder activated carbon (PAC) was discovered in the simultaneous anammox and denitrification (SAD) process which was operated in an anti-fouling submerged anaerobic membrane bio-reactor. Based on anammox performance, optimal OM dose (50 mg/L) was advised to start up SAD process successfully. The results of qPCR and high throughput sequencing analysis indicated that OM played a key role in microbial community evolutions, impelling denitrifiers to challenge anammox's dominance. The addition of PAC not only mitigated the membrane fouling, but also stimulated the enrichment of denitrifiers, accounting for the predominant phylum changing from Planctomycetes to Proteobacteria in SAD process. Functional genes forecasts based on KEGG database and COG database showed that the expressions of full denitrification functional genes were highly promoted in R_C, which demonstrated the enhanced full denitrification pathway driven by OM and PAC under low COD/N value (0.11).

Impact of inocula and operating conditions on the microbial community structure of two anammox reactors

The microbial community structure of the biomass selected in two distinctly inoculated anaerobic oxidation of ammonium (anammox) reactors was investigated and compared with the help of data obtained from 454-pyrosequencing analyses. The anammox reactors were operated for 550 days and seeded with different sludges: sediment from a constructed wetland (reactor I) and biomass from an aerated lagoon part of the oil-refinery wastewater treatment plant (reactor II). The anammox diversity in the inocula was evaluated by 16S rRNA gene-cloning analysis. The diversity of anammox bacteria was greater in the sludge from the oil-refinery (three of the five known genera of anammox were detected) than in the wetland sludge, in which only Candidatus Brocadia was observed. Pyrosequencing analysis demonstrated that the community enriched in both reactors had differing compositions despite the nearly similar operational conditions applied. The dominant phyla detected in both reactors were Proteobacteria, Chloroflexi, Planctomycetes, and Acidobacteria. The phylum Bacteroidetes, which is frequently observed in anammox reactors, was not detected. However, Acidobacteria and GN04 phyla were observed for the first time, suggesting their importance for this process. Our results suggest that, under similar operational conditions, anammox populations (Ca. Brocadia sinica and Ca. Brocadia sp. 40) were selected in both reactors despite the differences between the two initial inocula. Taken together, these results indicated that the type of inoculum and the culture conditions are key determinants of the general microbial composition of the biomass produced in the reactors. Operational conditions alone might play an important role in anammox selection.

Evaluation of granular anaerobic ammonium oxidation process for the disposal of pre-treated swine manure

With rising environmental concerns on potable water safety and eutrophication, increased media attention and tighter environmental regulations, managing animal waste in an environmentally responsible and economically feasible way can be a challenge. In this study, the possibility of using granular anammox process for ammonia removal from swine waste treatment water was investigated. A rapid decrease of NO₂⁻–N and NH₄⁺–N was observed during incubation with wastewater from an activated sludge deodorization reactor and anaerobic digestion-partial oxidation treatment process treating swine manure and its corresponding control artificial wastewaters. Ammonium removal dropped from 98.0 ± 0.6% to 66.9 ± 2.7% and nearly absent when the organic load in the feeding increased from 232 mg COD/L to 1160 mg COD/L and 2320 mg COD/L. The presence of organic carbon had limited effect on nitrite and total nitrogen removal. At a COD to N ratio of 0.9, COD inhibitory organic load threshold concentration was 727 mg COD/L. Mass balance indicated that denitrifiers played an important role in nitrite, nitrate and organic carbon removal. These results demonstrated that anammox system had the potential to effectively treat swine manure that can achieve high nitrogen standards at reduced costs.