Indoor volatile organic compounds and chemical sensitivity reactions

Inhaled Volatile Molecules-Responsive TRP Channels as Non-Olfactory Receptors

Generally, odorant molecules are detected by olfactory receptors, which are specialized chemoreceptors expressed in olfactory neurons. Besides odorant molecules, certain volatile molecules can be inhaled through the respiratory tract, often leading to pathophysiological changes in the body. These inhaled molecules mediate cellular signaling through the activation of the Ca2+-permeable transient receptor potential (TRP) channels in peripheral tissues. This review provides a comprehensive overview of TRP channels that are involved in the detection and response to volatile molecules, including hazardous substances, anesthetics, plant-derived compounds, and pheromones. The review aims to shed light on the biological mechanisms underlying the sensing of inhaled volatile molecules. Therefore, this review will contribute to a better understanding of the roles of TRP channels in the response to inhaled molecules, providing insights into their implications for human health and disease.

Numerical studies of indoor particulate and gaseous micropollutant transport and its impact on human health in densely-occupied spaces

Micropollutants (MPs) have increasingly become a matter of concern owing to potential health risks associated with human inhalation exposure, particularly in densely-occupied indoor environments. This study employed numerical simulations in a traditional built indoor workspace and a public transport cabin to elucidate the transport dynamics and health impacts of particulate and gaseous type of indoor MPs on varying groups of occupants. The risk of infection from pathogen-bearing MPs was evaluated in the workspace using the integrated Eulerian-Lagrangian and modified Wells-Riley model. In the cabin environment, the health impact of inhaled TVOC within the human nasal system was assessed via the integrated nasal-involved manikin model and cancer/non-cancer risk model. The results demonstrated that when ventilation layout was in favour of restricting particulate MPs spread, considerably high health risks (up to 17.22% infection possibility) were generally found in near-fields of emission source (< 2.25 m). Conversely, if the ventilated flow interacts robustly with emission source, every occupant has a minimum 5% infection risk. Incorporating the nasal cavity in the human model offers a nuanced understanding of gaseous MP distributions post-inhalation. Notably, the olfactory and sinus regions displayed heightened vulnerability to TVOC exposure, with a 62.5%-108% concentration increase compared to other nasal areas. Cancer risk assessment plausibly explained the rising occurrence of brain and central nervous system cancer for aircrew members. Non-cancer risk was found acceptable. This study was expected to advance the understanding of environmental pollution and the health risks tied to indoor MPs in densely-populated environments.

Sex-differences in the effects of indoor air pollutants and household environment on preschool child cognitive development

Air pollution, outdoor residential environment, indoor household characteristics, and parental mental health are potential factors associated with child development. However, few studies have simultaneously analyzed the association between the aforementioned factors and preschool child (aged 2-5 years) development. This study investigated the effects of those factors on child development and their potential modifying effects. A total of 142 participants were recruited from a birth cohort study in the Greater Taipei Area, and the evaluation was conducted at each participant's home from 2017 to 2020. Child cognitive development was assessed by psychologists using the Bayley Scales of Infant and Toddler Development and the Wechsler Preschool & Primary Scale of Intelligence. Household air pollutants, outdoor residential environment, indoor household characteristics, parental mental health, and other covariates were evaluated. Multiple regressions were used to examine the relationships between child development and covariates. Stratified analysis by child sex and parental mental health was conducted. Average indoor air pollutant levels were below Taiwan's Indoor Air Quality Standards. After adjustment for covariates, the indoor total volatile organic compounds (TVOCs) level was significantly associated with poor child development (per interquartile range increase in the TVOC level was associated with a 5.1 percentile decrease in child cognitive development). Sex difference was observed for the association between TVOC exposure and child development. Living near schools, burning incense at home, purchasing new furniture, and parental anxiety were related to child development. Indoor TVOC level was associated with poor child cognitive development, specifically with the girls. Indoor and outdoor residential environment and parental anxiety interfered with child development. TVOCs should be used cautiously at home to minimize child exposure. A low-pollution living environment should be provided to ensure children's healthy development.

Indoor Air Pollution and Decision-Making Behavior: An Interdisciplinary Review

The human brain is constantly exposed to air pollutants, some of which might be disruptive or even lethal to certain neurons implicated in abstract features of cognitive function. In this review, we present new evidence from behavioral and neural studies in humans, suggesting a link between indoor fine particulate matter and decision-making behavior. To illustrate this relationship, we use qualitative sources, such as historical documents of the Vietnam War to develop hypotheses of how aerial transmission of pollutants might obstruct alternative choices during the evaluation of policy decisions. We first describe the neural circuits driving decision-making processes by addressing how neurons and their cognate receptors directly evaluate and transduce physical phenomena into sensory perceptions that allow us to decide the best course of action among competing alternatives. We then raise the possibility that indoor air pollutants might also impact cell-signaling systems outside the brain parenchyma to further obstruct the computational analysis of the social environment. We also highlight how particulate matter might be pathologically integrated into the brain to override control of sensory decisions, and thereby perturb selection of choice. These lines of research aim to extend our understanding of how inhalation of airborne particulates and toxicants in smoke, for example, might contribute to cognitive impairment and negative health outcomes.

Air quality in a hospital dental department

Background/purpose

Documented studies demonstrated that particulate matter 2.5 (PM2.5) are relatively high in dental clinics. However, the PM2.5 composition is unclear. This study aimed to evaluate the dental department's air quality in a teaching hospital.

Materials and methods

The SKC AirChek XR5000 pumps and canister samplers were used to collect PM2.5 and volatile organic compounds (VOCs). The PM2.5 composition analysis (polycyclic aromatic hydrocarbons (PAHs) and metals) was conducted, and in the dental clinic and waiting room, the air quality comparison was investigated. Moreover, the dental clinic's air quality was compared before and after air purifier use.

Results

In the dental clinic and waiting room, the results revealed high PM2.5 concentration exceeding the standard of the United States Environmental Protection Agency (USEPA) (35 μg/m³); the values were 41.08–108.23 μg/m³ and 17.89–62.72 μg/m³, respectively. In both investigated locations, VOCs had no significant difference. Among 16 priority PAHs, the result indicated high level of benzo(b)fluoranthene (B(b)f), benzo(k)fluoranthene (B(k)f), benzo(a)pyrene (B(a)p), and indenopyrene (IP). B(b)f and B(k)f and lead (Pb) concentrations were detected with a significant difference in the clinic as compared to the waiting room. In addition, after air purifier use, the B(b)f concentration in the dental clinic reduced from 0.08 to 0.42 ug/m³ to 0.06–0.18 ug/m³ (P < 0.05).

Conclusion

For dental practitioners, an appropriated air quality regulation needs to be considered, due to high air pollutant concentration. In addition, using air purifier can efficiently reduce air pollutants.

Housing and Health: Here We Go Again

Housing is one of the major determinants of human health and the current COVID-19 pandemic has highlighted its relevance. The authors summarize the main issues, including dimensional standards, indoor air quality, safety, accessibility, neighborhoods, and area characteristics. The authors propose an operating scheme in order to implement actions to improve residential wellbeing on a local, national, and international level.

Flexible IoT Gas Sensor Node for Automated Life Science Environments Using Stationary and Mobile Robots

In recent years the degree of automation in life science laboratories increased considerably by introducing stationary and mobile robots. This trend requires intensified considerations of the occupational safety for cooperating humans, since the robots operate with low volatile compounds that partially emit hazardous vapors, which especially do arise if accidents or leakages occur. For the fast detection of such or similar situations a modular IoT-sensor node was developed. The sensor node consists of four hardware layers, which can be configured individually regarding basic functionality and measured parameters for varying application focuses. In this paper the sensor node is equipped with two gas sensors (BME688, SGP30) for a continuous TVOC measurement. In investigations under controlled laboratory conditions the general sensors’ behavior regarding different VOCs and varying installation conditions are performed. In practical investigations the sensor node’s integration into simple laboratory applications using stationary and mobile robots is shown and examined. The investigation results show that the selected sensors are suitable for the early detection of solvent vapors in life science laboratories. The sensor response and thus the system’s applicability depends on the used compounds, the distance between sensor node and vapor source as well as the speed of the automation systems.

The impact of thermal reprocessing of 3D printable polymers on their mechanical performance and airborne pollutant profiles

The alterations in volatile organic compound (VOC) and ultrafine particulate (UFP) matter emission profiles following thermal reprocessing of multiple materials were examined. Additionally, mechanical performance of the materials was studied. The VOCs were identified by collecting air samples with Tenax® TA tubes and analyzing them with a GC–MS system. UFP concentrations were monitored with a portable ultrafine particle counter. Total VOC emissions of all materials were reduced by 28–68% after 5 thermal cycles (TCs). However, slight accumulation of 1,4-dioxane was observed with poly(lactic acid) materials. UFP emissions were reduced by 45–88% for 3D printing grade materials over 5 TCs but increased by 62% in the case of a waste plastic material over 3 TCs. The mechanical performance of the materials was investigated by measuring their tensile strengths (TSs) and elastic moduli (EM) with an axial-torsion testing system. The reprocessed materials expressed fluctuations in their 3D printing qualities and mechanical performances. The mechanical performances were observed to reduce only slightly after 5 TCs, and the trend was observable only after the data was mass-normalized. The TSs of the samples were reduced by 10–24%, while the EM were reduced by 1–9% after 5 TCs. The TS and EM of one material were increased by 14 and 33%, respectively. In conclusion, recycled polymers are plausible 3D printing feedstock alternatives as they possess acceptable mechanical performance and low emittance according to this study. Furthermore, non-3D printing grade polymers may be applied in a 3D printer with caution.

Pediatric Asthma Attack and Home Paint Exposure

Although asthma mortality has been declining for the past several decades, asthma morbidity is on the rise, largely due to deteriorating indoor air quality and comorbidities, such as allergies. Consumer products and building materials including paints emit volatile organic compounds (VOCs), such as propylene glycol (PG), which is shown to dehydrate respiratory tracts and can contributor to airway remodeling. We hypothesize that paint exposure increases the risk of asthma attacks among children because high levels of VOCs persist indoors for many weeks after painting. Children 1-15 years old visiting two of the University of Miami general pediatric clinics were screened for their history of asthma and paint exposure by interviewing their parents and/or guardians accompanying them to the clinic. They were also asked questions about asthma diagnosis, severity of asthma and allergies and their sociodemographics. The risk of asthma attack among asthmatic children was modeled with respect to paint exposure adjusting for potential confounders using multivariate logistic regressions. Of 163 children, 36 (22%) reported physician-diagnosed asthma and of these, 13 (33%) had an asthma attack during the last one year. Paint exposure was marginally significant in the univariate analysis (OR = 4.04; 95% CI = 0.90-18.87; p < 0.1). However, exposed asthmatic children were 10 times more likely to experience an asthma attack than unexposed asthmatic children (OR = 10.49; CI = 1.16-94.85, p < 0.05) when adjusted for other risk factors. Given paint is one of the sources of indoor VOCs, multiple strategies are warranted to manage the health effects of VOC exposure from paint, including the use of zero-VOC water-based paint, exposure avoidance and clinical interventions.

Indoor Formaldehyde Concentration, Personal Formaldehyde Exposure and Clinical Symptoms during Anatomy Dissection Sessions, University of Medicine 1, Yangon

The formaldehyde (FA) embalming method, the world's most common protocol for the fixation of cadavers, has been consistently used in medical universities in Myanmar. This study was designed to examine the indoor FA concentrations in anatomy dissection rooms, an exposed site, and lecture theater, an unexposed control site, and to access personal exposure levels of FA and clinical symptoms of medical students and instructors. In total, 208 second year medical students (1/2019 batch) and 18 instructors from Department of Anatomy, University of Medicine 1, participated. Thirteen dissection sessions were investigated from February 2019 to January 2020. Diffusive sampling devices were used as air samplers and high-performance liquid chromatography was used for measurement of FA. Average indoor FA concentration of four dissection rooms was 0.43 (0.09-1.22) ppm and all dissection rooms showed indoor concentrations above the occupational exposure limits and short-term exposure limit for general population. Personal FA exposure values were higher than indoor FA concentrations and the instructors (0.68, 0.04-2.11 ppm) had higher exposure than the students (0.44, 0.06-1.72 ppm). Unpleasant odor, eye and nose irritations and inability to concentrate were frequently reported FA-related symptoms, and the students were found to have significantly higher risks (p < 0.05) of having these symptoms during the dissection sessions than during lecture.

Effects of crude oil vapors on the cardiovascular flow of embryonic Gulf killifish

Direct contact with toxicants in crude oil during embryogenesis causes cardiovascular defects, but the effects of exposure to airborne volatile organic compounds released from spilled oil are not well understood. The effects of crude oil-derived airborne toxicants on peripheral blood flow were examined in Gulf killifish (Fundulus grandis) since this model completes embryogenesis in the air. Particle image velocimetry was used to measure in vivo blood flow in intersegmental arteries of control and oil-exposed embryos. Significant effects in oil-exposed embryos included increased pulse rate, reduced mean blood flow speed and volumetric flow rate, and decreased pulsatility, demonstrating that normal-appearing oil-exposed embryos retain underlying cardiovascular defects. Further, hematocrit moderately increased in oil-exposed embryos. This study highlights the potential for fine-scale physiological measurement techniques to better understand the sub-lethal effects of oil exposure and demonstrates the efficacy of Gulf killifish as a unique teleost model for aerial toxicant exposure studies.

Environmental toxicology wars: Organ-on-a-chip for assessing the toxicity of environmental pollutants

Environmental pollution is a widespread problem, which has seriously threatened human health and led to an increase of human diseases. Therefore, it is critical to evaluate environmental pollutants quickly and efficiently. Because of obvious inter-species differences between animals and humans, and lack of physiologically-relevant microenvironment, animal models and in vitro two-dimensional (2D) models can not accurately describe toxicological effects and predicting actual in vivo responses. To make up the limitations of conventional environmental toxicology screening, organ-on-a-chip (OOC) systems are increasingly developing. OOC systems can provide a well-organized architecture with comparable to the complex microenvironment in vivo and generate realistic responses to environmental pollutants. The feasibility, adjustability and reliability of OCC systems make it possible to offer new opportunities for environmental pollutants screening, which can study their metabolism, collective response, and fate in vivo. Further progress can address the challenges to make OCC systems better investigate and evaluate environmental pollutants with high predictive power.

A Novel Wireless Wearable Volatile Organic Compound (VOC) Monitoring Device with Disposable Sensors

A novel portable wireless volatile organic compound (VOC) monitoring device with disposable sensors is presented. The device is miniaturized, light, easy-to-use, and cost-effective. Different field tests have been carried out to identify the operational, analytical, and functional performance of the device and its sensors. The device was compared to a commercial photo-ionization detector, gas chromatography-mass spectrometry, and carbon monoxide detector. In addition, environmental operational conditions, such as barometric change, temperature change and wind conditions were also tested to evaluate the device performance. The multiple comparisons and tests indicate that the proposed VOC device is adequate to characterize personal exposure in many real-world scenarios and is applicable for personal daily use.