Fabrication and characterization of transdermal delivery of ribociclib nanoemulgel in breast cancer treatment

The objective of this study is to create a nanoemulgel formulation of Ribociclib (RIBO), a highly selective inhibitor of CDK4/6 through the utilization of spontaneous emulsification method. An experimental investigation was conducted to construct pseudo-ternary phase diagram for the most favourable formulation utilizing rice bran oil, which is known for its diverse anticancer properties. The formulation consisted of varying combination of the surfactant and as the co-surfactant (Tween 80 and Transcutol, respectively) referred to as Smix and the trials were optimized to get the desired outcome. The nanoemulsion (NE) formulations that were developed exhibited a droplet size of 179.39 nm, accompanied with a PDI of 0.211. According to the data released by Opt-RIBO-NE, it can be inferred that the Higuchi model had the most favourable fit among many kinetics models considered. The results indicate that the use of nanogel preparations for the topical delivery of RIBO in breast cancer therapy, specifically RIBO-NE-G, is viable. This is supported by the extended release of the RIBO, and the appropriate level of drug permeation observed in Opt-RIBO-NE-G. Due to RIBO and Rice Bran oil, RIBO-NE-G had greater antioxidant activity, indicating its effectiveness as antioxidants. The stability of the RIBO-NE-G was observed over a period of three months, indicating a favourable shelf life. Therefore, this study proposes the utilization of an optimized formulation of RIBO-NE-G may enhance the efficacy of anticancer treatment and mitigate the occurrence of systemic side effects in breast cancer patients, as compared to the use of suspension preparation of RIBO.

QbD Based Formulation Development and Optimisation of Ozenoxacin Topical Nano-Emulgel and Efficacy Evaluation Using Impetigo Mice Model

To formulate and optimize Ozenoxacin nano-emulsion using Quality by Design (QbD) concept by means of Box-Behnken Design (BBD) and converting it to a gel to form Ozenoxacin nano-emulgel followed by physico-chemical, in-vitro, ex-vivo and in-vivo evaluation. This study demonstrates the application of QbD methodology for the development and optimization of an effective topical nanoemulgel formulation for the treatment of Impetigo focusing on the selection of appropriate excipients, optimization of formulation and process variables, and characterization of critical quality attributes. BBD was used to study the effect of "% of oil, % of Smix and homogenization speed" on critical quality attributes "globule size and % entrapment efficiency" for the optimisation of Ozenoxacin Nano-emulsion. Ozenoxacin loaded nano-emulgel was characterized for "description, identification, pH, specific gravity, amplitude sweep, viscosity, assay, organic impurities, antimicrobial effectiveness testing, in-vitro release testing, ex-vivo permeation testing, skin retention and in-vivo anti-bacterial activity". In-vitro release and ex-vivo permeation, skin retention and in-vivo anti-bacterial activity were found to be significantly (p < 0.01) higher for the nano-emulgel formulation compared to the innovator formulation (OZANEX™). Antimicrobial effectiveness testing was performed and found that even at 70% label claim of benzoic acid is effective to inhibit microbial growth in the drug product. The systematic application of QbD principles facilitated the successful development and optimization of a Ozenoxacin Nano-Emulsion. Optimised Ozenoxacin Nano-Emulgel can be considered as an effective alternative and found to be stable at least for 6 months at 40 °C / 75% RH and 30 °C / 75% RH.

Enhancing collagen based nanoemulgel for effective topical delivery of Aceclofenac and Citronellol oil: Formulation, optimization, in-vitro evaluation, and in-vivo osteoarthritis study with a focus on HMGB-1/RAGE/NF-κB pathway, Klotho, and miR-499a

The majority of conventional osteoarthritis (OA) treatments are based on molecular adjustment of certain signaling pathways associated with osteoarthritis (OA) pathogenesis, however there is a significant need to search for more effective and safe treatments. This study centers around formulating Aceclofenac (ACF) with high bioavailability in combination with Citronellol oil and collagen. The optimal concentrations of Citronellol oil/D-Limonene oil, Tween 80, and Transcutol HP were determined using a pseudoternary phase diagram. The formulated nanoemulsions were studied for thermophysical stability. Thermodynamically stable formula were analyzed for droplet size, zeta potential, and in-vitro permeation. Then, collagen based nanoemulsion were prepared to capitalize on its efficacy in reducing osteoarthritis side effects and characterized for nano size properties. Formulae F10 and F10C were chosen as optimum nanosize formula. Hense, they were prepared and characterized as nanoemulgel dosage form. The nanoemulgel formulae F10NEG1 and F10CNEG1 showed reasonable viscosity and spreadability, with complete drug release after 4 h. These formulae were chosen for further In vivo anti-OA study. Collagen based ACF/citronellol emugel were able to modulate HMGB-1/RAGE/NF-κB pathway, mitigating the production of inflammatory cytokine TNF-α. They were also able to modulate Klotho and miR-499, reducing serum CTXII and COMP, by reducing the cartilage destruction. Histological investigations validated the efficacy, safety, and superiority of Aceclofenac in combination with Citronellol oil and collagen (F10CNEG1) over solo the treated group (F10NEG1 and blank). Hence, the findings of the current work encourage the use of this promising combined formula in treatment of OA patients.

Development and preclinical assessment of nanoemulgel loaded with phytoconstituents for the management of rheumatoid arthritis

In recent years, natural ingredients have gained importance for therapeutic treatment due to their minimal toxicity. However, the delivery of these phytoconstituents poses a challenge to provide better efficacy. Current research reports the development of nanoemulgel (NEG) loaded with ginger oleoresin (GOR) and lipid guggul extract (LGE) for the management of rheumatoid arthritis (RA). The nanoemulsion (NE) was developed using the spontaneous emulsification technique by the pseudo-ternary method. The optimized nanoemulsion exhibited globule size of 16.08 ± 2.55 nm, PDI of 0.187 ± 0.06, and zeta potential of - 22.4 ± 0.31 mV. The cumulative release from in vitro diffusion studies at pH 7.4 was about 99.72 ± 3.47%, 57.98 ± 2.11%, and 86.42 ± 5.13% of 6-gingerol, E-guggulsterone, and Z-guggulsterone respectively at the end of 24 h. The ex vivo studies on porcine ear skin showed sustained release with 92.8 ± 3.21% for 6-gingerol, 55.61 ± 0.91% for E-guggulsterone, and 84.2 ± 4.22% for Z-guggulsterone released at the end of 24 h. The cell culture studies on RAW 264.7 cells indicated a robust inhibition of LPS-induced IL-6 and TNF-α production indicating its efficacy in the management of RA. The preclinical studies on male Wistar rats suggest that the developed NEG exhibited a comparable decrease in paw edema inflammation as compared to the marketed diclofenac sodium gel. These encouraging results demonstrate the potential of the developed nanoemulgel containing combination of GOR and LGE for the management of RA.

Recent Update on Nanoemulsion Impregnated Hydrogel: a Gleam into the Revolutionary Strategy for Diffusion-Controlled Delivery of Therapeutics

Since earlier times, dermatological remedies have been utilized to treat diseases associated with pain, irritation, and skin conditions. Compared to other routes of drug delivery, topical delivery of drugs offers several benefits. Scientists are investigating different alterations in dosage forms in addition to existing topical formulations such as ointments, gels, creams, lotions, and ointments to significantly improve the permeation of drugs and enhance the pharmacological efficacy of medications that are poorly absorbed via the skin. Conventional formulations have a plethora of problems viz. poor absorption, no target specificity, low spreadability, and inadequate bioavailability which leads the researchers toward developing novel formulations like nanoemulsions. The nanoemulsion can enhance the gradient in concentration and thermodynamic movement toward the epidermis and enhance the penetration of its constituents. However, due to its difficult application, nanoemulsion's lower viscosity limited its use in transdermal delivery. Thus, the development of nanoemulsion-based hydrogels has shown to be a successful strategy for removing obstacles from existing drug formulations. The simple application, expedient spreadability, non-stickiness, safety, and effectiveness of nanoemulsion-based hydrogel have led to substantial growth in their research in recent years. This review gives a brief idea about the prevalence of skin diseases, skin as an obstacle for drug delivery, and recent research insights to combat these obstacles. The work highlights the mechanism of drug release via nanoemulsion, hydrogels, and nanoemulsion-based hydrogels with reference to recent research on hydrophobic and hydrophilic drugs.

Development of food-grade antimicrobials of fenugreek oil nanoemulsion-bioactivity and toxicity analysis

Antimicrobials of natural origin are proving to be an effective solution to emerging antimicrobial resistance and its physiological side effects. Recent studies have demonstrated that essential oils encapsulated in the form of nanoemulsions have better antimicrobial activity than the oil itself, possibly due to its high stability, solubility, sustained release, and increased bioavailability. In the present study, fenugreek oil-a well-known antimicrobial and antioxidant-has been used to fabricate nanoemulsion (NE), with an objective to meet potential alternative to synthesized antimicrobials. A combination of three different components, water, fenugreek oil, and Tween 80, has been used to prepare the nanoemulsions of different size and one of the most stable nanoemulsion with lowest concentration of surfactant Tween 80 was used to assess its bioactivity, antimicrobial properties, and toxicity against human hepatic cell line. Among all the formulations, nano-emulsion with 2.5% oil concentration, 30 min sonication (hydrodynamic size 135.2 nm, zeta potential 36.8 mV, PDI 0.135, and pH 5.12), was selected for all studies. The nanoemulsion showed potential antibacterial activity against all the microbial strains (Escherichia coli, Bacillus subtilis, Staphylococcus aureus, and Pseudomonas aeruginosa) used in this study. Interestingly, the nanoemulsion showed potential antibacterial activity against P. aeruginosa, known to show resistance against ampicillin. The toxicity evaluation in human hepatic cell line (WRL-68) indicated no significant toxicity of nanoemulsion up to the concentration of 800 µg/ml. The synthesized nanoemulsion thus has a translational potential as a food-grade non-toxic natural nanoantimicrobials.

Development of Miconazole Nitrate Nanoparticles Loaded in Nanoemulgel to Improve its Antifungal Activity

Miconazole is a synthetic derivative of imidazole, a medication with a broad-spectrum antifungal agent that is used to treat localized vaginal, skin, and nail infections. The aim of the study was to develop an innovative technique to improve the permeability and efficacy of topical miconazole nitrate. A nanoemulgel of miconazole nitrate was formulated by the incorporation of a nanoemulsion and a hydrogel. The nanoemulsion was first optimized using a self-emulsifying technique, and the drug was then loaded into the optimum formulation and evaluated prior to mixing with the hydrogel. Miconazole nitrate nanoemulgel formulations were evaluated for their physical characteristics and antifungal activity. Based on the results, the formulation with 0.4 % Carbopol showed the highest release profile (41.8 mg/ml after 2 h); thus, it was chosen as the optimum formulation. A cell diffusion test was performed to examine the ability of the Miconazole nitrate nanoemulgel to penetrate the skin and reach the bloodstream. Percentage cumulative drug releases of 29.67 % and 23.79 % after 6 h were achieved for the MNZ nanoemulgel and the commercial cream, Daktazol, respectively. The antifungal activity of the novel MNZ nanoemulgel formulation was tested against Candida albicans and compared to Daktazol cream and almond oil; the results were: 40.9 ± 2.3 mm, 25.4 ± 2.7 mm and 18 ± 1.9 mm, respectively. In conclusion, a novel MNZ nanoemulgel showing superior antifungal activity compared to that of the commercial product has been developed. This nanotechnology technique is a step toward making pharmaceutical dosage forms that has a lot of promise.

Nanoemulsion-Based Hydrogels and Organogels Containing Propolis and Dexpanthenol: Preparation, Characterization, and Comparative Evaluation of Stability, Antimicrobial, and Cytotoxic Properties

Recently, nanoemulsion-based gels have become very popular for dermal drug delivery, overcoming the disadvantages of conventional semi-solid drug forms. The aim of this study is to prepare and characterize nanoemulsion-based hydrogels and organogels containing combined propolis and dexpanthenol, and to compare their stability, antimicrobial, and cytotoxicity properties. Within the scope of characterization studies, organoleptic properties, drug content, morphology, pH, gel-sol conversion temperature, spreadability, viscosity, FT-IR, and release properties were evaluated in hydrogels and organogels. The characterization studies carried out were subjected to short-term stability evaluation at room temperature and refrigerator for 3 months. While no phase separation was observed in any of the formulations kept in the refrigerator, phase separation was observed in four formulations kept at room temperature. The release study successfully obtained an extended release for propolis and dexpanthenol. In the antimicrobial susceptibility study, Hydrogel 1 showed activity against S. aureus, while Organogel 1 showed activity against both S. aureus and S. epidermidis. In the cytotoxicity study against HDFa cells, both Hydrogel 1 and Organogel 1 were found to be nontoxic at low doses. These hydrogels and organogels, which contain propolis and dexpanthenol in combination for the first time, are promising systems that can be used in wound and burn models in the future.

In-vitro characterization oftofacitinibloaded novel nanoemulgel fortopical delivery for the management of rheumatic arthritis

The purpose of the current study is to prepare the tofacitinibnanoemulgelfor topical administration with optimized particle size, high loading efficiency, and better penetration through the skin for the treatment of rheumatic arthritis. The topical delivery of this drugavoids the hazards associated with oral delivery like upper respiratory tract infections and neutropenia. Theformulationswere prepared usingthe high-energy ultrasonication method. Oleic acid, tween 80, andpropylene glycol were used to prepare tofacitinibnanoemulsionwhich is then homogenized with carbopol-934 hydrogel to get the nanoemulgel loaded with tofacitinib.The concentration of independent variables such as X₁ (oil phase), X₂ (surfactant), and X₃ (cosurfactant) wasoptimized using theBox-Behnken design to check its impact on dependent variables such as Y₁ (particle size), and Y₂(loading efficiency) of the nanoemulsion.The minimumparticle size of 106.3 ± 2.8nm and maximum loading efficiency of 19.3 ± 1.8%were obtained for nanoemulsion. The nanoemulgels were evaluated for different organoleptic and physicochemical stability which were found within the normal range. The in-vitro release studies showed 89.64 ± 0.97% cumulative release of tofacitinib from nanoemulgel over the period of 24 hours.The drug release data were fitted in different kinetic models and it followed Higuchi and Korsmeyer- Peppas model clearly showing the non-fickian drug release from matrix system. As a result, the tofacitinib nanoemulgel that have been produced could be a viable delivery mechanism for topical route.

Tamoxifen Citrate Containing Topical Nanoemulgel Prepared by Ultrasonication Technique: Formulation Design and In Vitro Evaluation

The present study aims to design and develop a nanoemulgel formulation of Tamoxifen citrate (TAM), a water-insoluble, potent anticancer drug, using the spontaneous emulsification method to improve topical delivery, achieve high accumulation at the tumour site, and spare the healthy tissues. The oil-based selection was related to the TAM solubility, while the surfactant and co-surfactant were chosen based on the droplets’ thermodynamic stability and size. Afterwards, a pseudo-ternary phase diagram was built for the most promising formulation using two oils, olive and sesame, with a varied mix of Tween 40 as the surfactant and Trascutol HP as the co-surfactant (Smix), by the optimisation of experiments. The nanoemulsion (NE) formulations that were prepared were found to have an average droplet size of 41.77 ± 1.23 nm and 188.37 ± 3.53 nm, with suitable thermodynamic stability and physicochemical properties. Both olive and sesame oils are natural food additives due to their associated antioxidant effects; therefore, they showed no toxicity profile on breast cell lines (MCF-7, ATCC number HTB-22). The TAM-NE preparations revealed a prolonged and doublings superior cumulative percentage of in vitro release of TAM compared to TAM plain gel suspension over 24 h. The release data suggested that the Higuchi model was the best fitting kinetical model for the developed formulations of NE1, NE9, and NE18. The extended release of the drug as well as an acceptable amount of the drug permeated TAM via nanogel preparations suggested that nanoemulgel (NEG) is suitable for the topical delivery of TAM in breast cancer management. Thus, this work suggests that a nanogel of TAM can improve anticancer properties and reduce systemic adverse effects compared to a suspension preparation of TAM when applied in the treatment of breast cancer.

Tea Tree Oil Nanoemulsion-Based Hydrogel Vehicle for Enhancing Topical Delivery of Neomycin

The present investigation aims to improve the antimicrobial influence of certain antibacterial drugs, namely, neomycin (NEO), exploiting the benefits of natural oils such as tea tree oil (TTO). Therefore, a distinctive nanolipid formulation, namely, a nanoemulsion (NE), was developed using a Central Composite Factorial Design (CCD) approach depending on the amount of TTO and tween 80 as surfactant. The optimized NEO-NE formula exhibiting minimum globular size and maximum in vitro release was selected. For efficient topical delivery, NEO-NE was incorporated into a pre-formulated hydrogel. The developed NEO-NE-hydrogel was characterized by its physical characteristics such as pH, viscosity, and spreadability. Next, it was tested for stability under different conditions for 3 months. Ultimately, an irritation test was conducted followed by an antibacterial examination. The preparation demonstrated acceptable properties to be successfully applied topically. It showed non-significant changes in stability in both conditions up to 3 months storage when compared to a fresh preparation. It exhibited no irritation when applied on hairless animal skin. Finally, TTO revealed a good inhibition for the bacterial growth that could improve the influence of NEO antibacterial activity, indicating the efficiency of NE containing NEO prepared with TTO to be a promising antibacterial nanocarrier.

Beneath the Skin: A Review of Current Trends and Future Prospects of Transdermal Drug Delivery Systems

The ideal drug delivery system has a bioavailability comparable to parenteral dosage forms but is as convenient and easy to use for the patient as oral solid dosage forms. In recent years, there has been increased interest in transdermal drug delivery (TDD) as a non-invasive delivery approach that is generally regarded as being easy to administer to more vulnerable age groups, such as paediatric and geriatric patients, while avoiding certain bioavailability concerns that arise from oral drug delivery due to poor absorbability and metabolism concerns. However, despite its many merits, TDD remains restricted to a select few drugs. The physiology of the skin poses a barrier against the feasible delivery of many drugs, limiting its applicability to only those drugs that possess physicochemical properties allowing them to be successfully delivered transdermally. Several techniques have been developed to enhance the transdermal permeability of drugs. Both chemical (e.g., thermal and mechanical) and passive (vesicle, nanoparticle, nanoemulsion, solid dispersion, and nanocrystal) techniques have been investigated to enhance the permeability of drug substances across the skin. Furthermore, hybrid approaches combining chemical penetration enhancement technologies with physical technologies are being intensively researched to improve the skin permeation of drug substances. This review aims to summarize recent trends in TDD approaches and discuss the merits and drawbacks of the various chemical, physical, and hybrid approaches currently being investigated for improving drug permeability across the skin.

Topical nanostructured lipid carriers of alpha-mangostin and resveratrol for synergistic antioxidant activity

BACKGROUND

Nanostructured lipid carriers (NLCs) are interesting lipid-based carrier systems for enhancing the penetration of drugs through the skin after topical administration.

OBJECTIVE

Dual drug-loaded NLCs of alpha-mangostin (M) and resveratrol (R) to enhance antioxidant activity were developed for topical delivery.

METHODS

The efficacy of a combination of M and R was evaluated in terms of the antioxidant activity. M and R were loaded into the NLCs using a high shear homogenization and ultrasonication process. The particle size, zeta potential, and physical properties of the NLCs were observed. The M and R loading efficiency as well as release patterns were examined using Franz diffusion cells. Moreover, the antioxidant efficacy and in vitro cytotoxicity in the normal human fibroblast (NHF) of the NLCs were evaluated as well.

RESULTS

The results found that the combination of M and R offered synergistic antioxidant activity and was successfully loaded into the NLCs with the size of a nanometer and negative zeta potential. The drugs were loaded in the NLCs as molecular dispersions and slowly released from the NLCs. Interestingly, both drugs maintained their antioxidant activity after being loaded into the NLCs and provided a higher antioxidant activity than those in the single loading of M and R, thus demonstrating that the incorporation of M and R into the NLCs allowed an enhanced antioxidant activity. Moreover, a cytotoxicity study showed that the NLCs were safe and had low cytotoxicity on the NHF cells.

CONCLUSION

The M and R loaded NLCs were attractive systems for synergistic antioxidant activity for topical application.

Development, Characterization and Optimization of the Anti-Inflammatory Influence of Meloxicam Loaded into a Eucalyptus Oil-Based Nanoemulgel

The purpose of the present study was to explore the influence of a certain natural essential oil, namely eucalyptus oil, as an anti-inflammatory agent in addition to its prospective role in enhancing the action of meloxicam in reducing inflammation. As far as we know, this has been the first integration of meloxicam and eucalyptus essential oil into a nanoemulgel formulation intended for topical use. Primarily, eucalyptus oil was utilized in developing a nanoemulsion formulation incorporating meloxicam. A 22 factorial design was constructed using two independent variables (oil concentration and surfactant concentration) with two responses (particle size and % of in vitro release). One optimized formula was selected depending on the desirability function and subjected to a stability study. The optimized nanoemulsion was mixed with HPMC as a gelling agent to produce a meloxicam-loaded nanoemulgel, which was examined for its properties, stability, in vitro release and ex vivo permeation. Eventually, the anti-inflammatory activity was evaluated and compared with a placebo and corresponding gel formulation. The developed nanoemulgel revealed acceptable physical characteristics to be applied topically. Studying of the in vitro release was conducted successfully for 6 h. The ex vivo permeation from the nanoemulgel formulations was prompted, showing an appropriate value of the steady-state transdermal flux (SSTF). As a final point, the anti-inflammatory activity of the developed nanoemulgel revealed a valued anti-inflammatory influence. Additionally, the concurrence of eucalyptus essential oil and meloxicam was assured, and their potential in combating and lowering inflammation was supported.

Musa acuminata nanoemulgel: formulation, in vitro kinetics and antimicrobial studies

The study was intended to formulate nanoemulgel from the leaf extract of Musa acuminata. Ethanol and chloroform were used as solvents in the ratio of 1:8 (%w/v). DL-alpha-tocopherol, characterised by gas chromatography mass spectrometry, was identified to be the major component with potential biological activities. Based on a pseudo-ternary plot, the 1:1 S mix (surfactant:co-surfactant) ratio was optimised as it posed maximum regions of emulsion. The prepared nanoemulgel was evaluated for physical appearance, pH, spreadability and swelling index. The appearance was pale yellowish-white, translucent within a pH range of 5–5.8. Antimicrobial studies were performed against dandruff-causing microbes (Staphylococcus epidermidis and Malassezia furfur). In vitro studies were carried out for optimised formulations of EG2, EG4, CG2 and CG3. The drug release of 94.28% after 12 h with the Higuchi plot of R 2 value as 0.99 was observed for EG2. The kinetically optimised formulation, EG2, was found to have a good spreadability of 12.2 (g cm)/s and a swelling index of 64%.

Nanoemulsion-based dosage forms for the transdermal drug delivery applications: A review of recent advances

INTRODUCTION

Nanoemulsion-based drug delivery approaches have witnessed massive acceptance over the years and acquired a significant foothold owing to their tremendous benefits over the others. It has widely been used for transdermal delivery of hydrophobic and hydrophilic drugs with solubility, lipophilicity, and bioavailability issues.

AREAS COVERED

The review highlights the recent advancements and applications of transdermal nanoemulsions. Their utilities and characteristics, clinical pertinence showcasing intellectual properties and advancements, potential in treating disorders accompanying liquid, semisolid, and solid dosage forms, the ability to modulate a drug's physicochemical properties, and regulatory status are thoroughly summarized.

EXPERT OPINION

Despite tremendous therapeutic utilities and extensive investigations, this field of transdermal nanoemulsion-based technologies yet tackles several challenges such as optimum use of surfactant mixtures, economic burden due to high energy consumption during production, lack of concrete regulatory requirement, etc. Provided with the concrete guidelines on the safe use of surfactants, stability, use of scalable and economical methods, and the use of NE as a transdermal system would solve the purpose best as nanoemulsion shows remarkable improvement in drug release profiles and bioavailability of many drugs. Nevertheless, a better understanding of nanoemulsion technology holds a promising outlook and would land more opportunities and better delivery outcomes.

Enhancement of Anti-Inflammatory Activity of Optimized Niosomal Colchicine Loaded into Jojoba Oil-Based Emulgel Using Response Surface Methodology

Recent progression in investigational studies aiming to integrate natural products and plant oils in developing new dosage forms that would provide optimal therapeutic effect. Therefore, the aim of the present exploration was to inspect the influence of jojoba oil in boosting the anti-inflammatory effect of colchicine natural product. To our knowledge, there is no formulation comprising colchicine and jojoba oil together to form a niosomal emulgel preparation anticipated for topical application. Colchicine is a natural product extracted from Colchicum autumnale that has been evidenced to show respectable anti-inflammatory activity. Owing to its drawbacks and low therapeutic index, it was preferable to be formulated into topical dosage form. The current study inspected colchicine transdermal delivery by developing niosomal preparation as a potential nanocarrier included into emulgel prepared with jojoba oil. Box Behnken design was constructed to develop 17 niosomal emulgel formulations. The optimized colchicine niosomal emulgel was evaluated for its physical characteristics and in vitro release studies. The in vivo anti-inflammatory activity was estimated via carrageenan-induced rat hind paw edema method. The developed colchicine niosomal preparation revealed particle size of 220.7 nm with PDI value 0.22, entrapment efficiency 65.3%. The formulation was found to be stable showing no significant difference in particle size and entrapment efficiency up on storage at 4 °C and 25 °C for 3 months. The optimized colchicine niosomal emulgel exhibited a pH value 6.73, viscosity 4598 cP, and spreadability 38.3 mm. In vitro release study of colchicine from niosomal emulgel formulation was around 52.4% over 6 h. Apparently, the proficient anti-inflammatory activity of colchicine niosomal emulgel was confirmed via carrageenan-induced rat hind paw edema test. Overall, the results recommend the combination of niosomal preparation with jojoba oil-based emulgel that might signify a favorable delivery of anti-inflammatory drug such as colchicine.

Preparation and Characterization of Curcumin Nanoemulgel Utilizing Ultrasonication Technique for Wound Healing: In Vitro, Ex Vivo, and In Vivo Evaluation

Hydrogels being a drug delivery system has great significance particularly for topical application in cutaneous open wound. Its specific physicochemical properties such as non-adhesiveness, moisture retention, exudate absorption, and gas permeability make them ideal as a drug delivery vehicle for wound healing application. Further, curcumin (a natural bioactive) was selected as a therapeutic agent to incorporate into the hydrogel system to design and develop nanogel pharmaceutical products for wound healing. Although, curcumin possesses remarkable anti-inflammatory, antioxidant, and anti-infective activity along with hastening the healing process by acting over the different stages of the wound healing process, but its poor biopharmaceutical (low aqueous solubility and skin penetrability) attributes hamper their therapeutic efficacy for skin applications. The current investigation aimed to develop the curcumin-loaded nanogel system and evaluated to check the improvement in the therapeutic efficacy of curcumin through a nanomedicine-based approach for wound healing activity in Wistar rats. The curcumin was enclosed inside the nanoemulsion system prepared through a high-energy ultrasonic emulsification technique at a minimum concentration of surfactant required to nanoemulsify the curcumin-loaded oil system (Labrafac PG) having droplet size 56.25 ± 0.69 nm with polydispersity index 0.05 ± 0.01 and negatively surface charge with zeta potential −20.26 ± 0.65 mV. It was observed that the impact of Smix (surfactant/co-surfactant mixture) ratio on droplet size of generated nanoemulsion is more pronounced at lower Smix concentration (25%) compared to the higher Smix concentration (30%). The optimized curcumin-loaded nanoemulsion was incorporated into a 0.5% Carbopol^® 940 hydrogel system for topical application. The developed curcumin nanoemulgel exhibited thixotropic rheological behavior and a significant (p < 0.05) increase in skin penetrability characteristics compared to curcumin dispersed in conventional hydrogel system. The in vivo wound healing efficacy study and histological examination of healed tissue specimen further signify the role of the nanomedicine-based approach to improve the biopharmaceutical attributes of curcumin.

Brucine-Loaded Ethosomal Gel: Design, Optimization, and Anti-inflammatory Activity

Brucine, one of the natural medications obtained from Nux vomica seeds, is used as an anti-inflammatory drug. Several investigations were performed to overcome its drawbacks, which will affect significantly its pharmaceutical formulation. The goal of the current investigation was to design, optimize, and evaluate the anti-inflammatory performance of BRU ethosomal gel. Brucineethosomal formulations were prepared using thin film hydration method and optimized by central composite design approach using three independent variables (lecithin concentration, cholesterol concentration, and ethanol percentage) and three response variables (vesicular size, encapsulation efficiency, and skin permeation). The optimized formulation was examined for its stability and then incorporated into HPMC gel to get BRU ethosomal gel. The obtained BRU-loaded ethosomal gel was evaluated for its physical properties, in vitro release, and ex vivo permeation and skin irritation. Finally, carrageenan-induced rat hind paw edema test was adopted for the anti-inflammatory activity. The developed BRU ethosomal gel exhibited good physical characteristics comparable with the conventional developed BRU gel. In vitro release of BRU from ethosomal gel was effectively extended for 6 h. Permeation of BRU from ethosomes was significantly higher than all formulations (p < 0.05), since it recorded steady state transdermal flux value 0.548 ± 0.03 μg/cm² h with enhancement ratio 2.73 ± 0.23. Eventually, BRU ethosomal gel exhibited potent anti-inflammatory activity as manifested by a significant decrease in rat hind paw inflammation following 24 h. In conclusion, the study emphasized the prospective of ethosomal gel as a fortunate carrier for intensifying the anti-inflammatory effect of Brucine.

Thymoquinone Loaded Topical Nanoemulgel for Wound Healing: Formulation Design and In-Vivo Evaluation

Thymoquinone is a natural bioactive with significant therapeutic activity against multiple ailments including wound healing. The poor aqueous solubility and low skin permeability limit its therapeutic efficacy. The present investigation aimed to improve the biopharmaceutical attributes of thymoquinone to enhance its topical efficacy in wound healing. A nanoemulsion-based hydrogel system was designed and characterized as a nanotechnology-mediated drug delivery approach to improve the therapeutic efficacy of thymoquinone, utilizing a high-energy emulsification technique. The black seed oil, as a natural home of thymoquinone, was utilized to improve the drug loading capacity of the developed nanoemulsion system and reduced the oil droplet size to <100 nm through ultrasonication. The influence of formulation composition, and the ultrasonication process conditions, were investigated on the mean globule size and polydispersity index of the generated nanoemulsion. Irrespective of surfactant/co-surfactant ratio and % concentration of surfactant/co-surfactant mixture, the ultrasonication time had a significant (p < 0.05) influence on the mean droplet size and polydispersity index of the generated nanoemulsion. The developed nanoemulgel system of thymoquinone demonstrated the pseudoplastic behavior with thixotropic properties, and this behavior is desirable for topical application. The nanoemulgel system of thymoquinone exhibited significant enhancement (p < 0.05) in skin penetrability and deposition characteristics after topical administration compared to the conventional hydrogel system. The developed nanoemulgel system of thymoquinone exhibited quicker and early healing in wounded Wistar rats compared to the conventional hydrogel of thymoquinone, while showing comparable healing efficacy with respect to marketed silver sulfadiazine (1%) cream. Furthermore, histopathology analysis of animals treated with a developed formulation system demonstrated the formation of the thick epidermal layer, papillary dermis along with the presence of extensive and organized collagen fibers in newly healed tissues. The outcome of this investigation signifies that topical delivery of thymoquinone through nanoemulgel system is a promising candidate which accelerates the process of wound healing in preclinical study.

Nanoemulgel for Improved Topical Delivery of Desonide: Formulation Design and Characterization

This research aimed to develop a novel drug delivery system to improve treatment of skin disorders. The system is comprised of a Carbopol 980-based nanoemulgel (NE-gel) containing a desonide (DES; 0.05%, w/w) nanoemulsion (NE), which has a small particle size, high encapsulation efficiency, good thermodynamic stability, good permeation ability, and high skin retention. DES-loaded NE (DES-NE) was prepared by high-pressure homogenization. The developed formulation was characterized by differential scanning calorimetry (DSC), X-ray diffraction, drug release, skin permeation, and drug retention. DES in vitro release and skin permeation studies with different formulations of artificial membrane and rat abdominal skin were performed with the Franz diffusion cell system. Confocal laser scanning microscopy (CLSM) was used to detect the localization and permeation pathways of drugs in the skin. Compared with commercially available gel (CA-gel) and NE, the NE-gel release process conformed to the Higuchi release model (R² = 0.9813). NE-gel prolonged the drug release time and allowed for reduced administration dose and frequency. The unit cumulative permeation of NE and NE-gel through the skin for 12 h was 63.13 ± 2.78 and 42.53 ± 2.06 μg/cm², respectively, values significantly higher (p < 0.01) than that of the CA-gel (30.65 ± 1.25 μg/cm²) and CA-cream (15.21 ± 0.97 μg/cm²). The DES-NE and DES NE-gel skin drug retention was significantly higher than commercially available formulations (p < 0.01). Hence, the prepared NE-gel is a potential vehicle for improved topical DES delivery for better treatment of skin disorders.

Microemulsions as Solubilizers and Penetration Enhancers for Minoxidil Release from Gels

Micro- and nanoemulsions are potential drug solubilizers and penetration enhancers through the high surfactant/co-surfactant content. This study aimed to evaluate the influence of minoxidil (MXD) solubilized in the microemulsions (MEs) on drug release by in vitro/ex vivo diffusion through the semi-permeable membrane Spectra/Por^® (Spectrum Laboratory, Gardena, CA, USA) and porcine ear skin. Moreover, a residual amount of drug in the skin after ex vivo diffusion was evaluated. The reference ME_R, lecithin-containing ME_L, and gelatin-containing ME_G were characterized in terms of their size, polydispersity index, density, viscosity, electrical conductivity and surface tension. Based on the in vitro diffusion, it can be argued that ME_L slowed down the drug release, while ME_R and ME_G have no significant effect compared to the sample, in which propylene glycol (PG) was used as a solubilizer. Determination of the residual drug amount in the skin after 6 h of the ex vivo permeation was demonstrated as the most valuable method to evaluate the effectiveness of the ME’s application. The results indicate that the most optimal MXD permeation enhancers in alginate gel were the natural surfactants containing MEs. MXD solubilization in ME_G and ME_L had caused more than 5% of the drug remaining in the skin, which is almost a 1.5-fold higher amount compared to the reference gel.

Enhancement of Curcumin Anti-Inflammatory Effect via Formulation into Myrrh Oil-Based Nanoemulgel

Background: Curcumin (Cur) possesses a variety of beneficial pharmacological properties including antioxidant, antimicrobial, anti-cancer and anti-inflammatory activities. Nevertheless, the low aqueous solubility and subsequent poor bioavailability greatly limits its effectiveness. Besides, the role of myrrh oil as an essential oil in treating inflammatory disorders has been recently demonstrated. The objective of the current investigation is to enhance Cur efficacy via developing Cur nanoemulgel, which helps to improve its solubility and permeability, for transdermal delivery. Methods: The formulated preparations (Cur gel, emulgel and nanoemulgel) were evaluated for their physical appearance, spreadability, viscosity, particle size, in vitro release and ex vivo drug permeation studies. The in vivo anti-inflammatory activity was estimated using the carrageenan-induced rat hind paw edema method. Results: The formulated Cur-loaded preparations exhibited good physical characteristics that were in the acceptable range of transdermal preparations. The release of Cur from gel, emulgel and nanoemulgel after 12 h was 72.17 ± 3.76, 51.93 ± 3.81 and 62.0 ± 3.9%, respectively. Skin permeation of Cur was significantly (p < 0.05) improved when formulated into nanoemulgel since it showed the best steady state transdermal flux (SSTF) value (108.6 ± 3.8 µg/cm²·h) with the highest enhancement ratio (ER) (7.1 ± 0.2). In vivo anti-inflammatory studies proved that Cur-loaded nanoemulgel displayed the lowest percent of swelling (26.6% after 12 h). Conclusions: The obtained data confirmed the potential of the nanoemulgel dosage form and established the synergism of myrrh oil and Cur as an advanced anti-inflammatory drug.

Development and characterization of nano-emulsions and nano-emulgels for transdermal delivery of statins

BACKGROUND

Oral administration of statins for the treatment of familial hypercholesterolemia results in poor therapeutic outcomes and patient compliance. An alternative administration route is proposed to circumvent the current limitations. This research is aimed at developing nano-emulsions and nano-emulgels as the ultimate potential delivery systems of statins for administration via the transdermal route.

METHODS

Oil-in-water (o/w) nano-formulations (nano-emulsions and nano-emulgels) containing 2% (w/w) of the selected statin and 8% apricot kernel oil as oil phase were formulated. The nano-formulations were characterized using transmission electron microscopy (TEM), pH, viscosity, droplet size and zeta-potential.

RESULTS

Nano-emulsions' and nano-emulgels' droplet size ranged between 114.23-169.83 nm and 149.83-267.53 nm, respectively. The addition of Carbopol® Ultrez 20 increased the nano-emulsions' viscosity (3.59-8.38 cP) resulting in the formation of nano-emulgels (viscosity: 1911.00-46,090.00 cP). The entrapment efficiency (90.77-99.55%) confirmed the incorporation of the statins. Membrane release studies indicated that statins were released at higher flux values in nano-emulsions compared to their respective nano-emulgels. Ex vivo (skin diffusion) studies indicated higher median values in the nano-emulgels compared to their nano-emulsion counterparts.

CONCLUSIONS

The results indicate the benefits of nano-emulsions and nano-emulgels as potential alternative delivery systems for the transdermal delivery of statins.

Therapeutic Nanoemulsion: Concept to Delivery

Nanoemulsions (NEs) or nanometric-scaled emulsions are transparent or translucent, optically isotropic and kinetically stable heterogeneous system of two different immiscible liquids namely, water and oil stabilized with an amphiphilic surfactant having droplet size ranges up to 100 nm. They offer a variety of potential interests for certain applications: improved deep-rooted stability; excellent optical clarity; and, enhanced bioavailability due to its nanoscale of particles. Though there is still comparatively narrow insight apropos design, development, and optimization of NEs, which mainly stems from the fact that conventional characteristics of emulsion development and stabilization only partly apply to NEs. The contemporary article focuses on the nanoemulsion dosage form journey from concept to key application in drug delivery. In addition, industrial scalability of the nanoemulsion, as well as its presence in commercial and clinical practice, are also addressed.

Novel Clove Essential Oil Nanoemulgel Tailored by Taguchi's Model and Scaffold-Based Nanofibers: Phytopharmaceuticals with Promising Potential as Cyclooxygenase-2 Inhibitors in External Inflammation

PURPOSE

Clove essential oil is a phytochemical possessing a vast array of biological activities. Nevertheless, fabricating nano topical delivery systems targeted to augment the anti-inflammatory activity of the oil has not been investigated so far. Accordingly, in this study, controlled release nanoparticulate systems, namely nanoemulgel and nanofibers (NFs), of the oil were developed to achieve such goal.

METHODS

The nanoemulsion was incorporated in the hydrogel matrix of mixed biopolymers - chitosan, guar gum and gum acacia - to formulate nanoemulsion-based nanoemulgel. Taguchi's model was adopted to evaluate the effect of independently controlled parameters, namely, the concentration of chitosan (X1), guar gum (X2), and gum acacia (X3) on different dependently measured parameters. Additionally, the nanoemulsion-based NFs were prepared by the electrospinning technique using polyvinyl alcohol (PVA) polymer. Extensive in vitro, ex vivo and in vivo evaluations of the aforementioned formulae were conducted.

RESULTS

Both Fourier transform-infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC) established the complete dispersion of the nanoemulsion in the polymeric matrices of the prepared nanoemulgel and NFs. The ex vivo skin permeation data of clove essential oil from the prepared formulations showed that NFs can sustain its penetration through the skin comparably with nanoemulgel. Topical treatment with NFs (once application) and nanoemulgel (twice application) evoked a marvelous in vivo anti-inflammatory activity against croton oil-induced mouse skin inflammation model when compared with pure clove essential oil along with relatively higher efficacy of medicated NFs than that of medicated nanoemulgel. Such prominent anti-inflammatory activity was affirmed by histopathological and immunohistochemical examinations.

CONCLUSION

These results indicated that nanoemulsion-based nanoemulgel and nanoemulsion-based NFs could be introduced to the phytomedicine field as promising topical delivery systems for effective treatment of inflammatory diseases instead of nonsteroidal anti-inflammatory drugs that possess adverse effects.

Development and optimization of nanoemulsion based gel for enhanced transdermal delivery of nitrendipine using box-behnken statistical design

Objective: The purpose of present research was to develop and statistically optimize nitrendipine nanoemulsion gel for transdermal delivery using box-behnken statistical design.Method: The nanoemulsion formulations bearing nitrendipine were prepared by application of ternary phase diagram and spontaneous emulsification method. Box-behnken design was employed for the optimization of nitrendipine loaded nanoemulsion. The independent variables were oil, surfactant and co-surfactant while globule size, drug content and zeta potential were dependent variables. The optimized nanoemulsion formulation was incorporated into gel and evaluated for in-vitro release, ex-vivo permeation studies, confocal laser scanning microscopy, skin irritation and histopathological studies.Results: The optimized formulation through box-behnken statistical design showed globule size of 20.43 ± 1.50 nm, drug content of 97.05 ± 1.77% and zeta potential of -15.45 ± 0.35 mV. The ex-vivo study confirmed the enhanced delivery of nitrendipine from nanoemulsion gel than compare to drug solution by virtue of better permeation and solubility. Nanoemulsion gel was proved significantly superior by confocal laser scanning microscopy for satisfactory permeation and distribution of gel, deep into the rat skin. The optimized gel was found with no allergic dermal effects and was proved safe by histopathological studies for transdermal application.Conclusions: Results reveals that developed nitrendipine nanoemulsion gel overcomes the limitation of low penetration and accentuate permeation through albino Wistar rat skin. It was concluded that nanoemulsion gel could be utilized as a potential carrier for transdermal delivery of nitrendipine.

Bromocriptine Nanoemulsion-Loaded Transdermal Gel: Optimization Using Factorial Design, In Vitro and In Vivo Evaluation

Bromocriptine mesylate (BCM), a dopaminergic agonist administered orally, exhibits retarded bioavailability owing to poor absorption and extreme first-pass metabolism. The objective of the current study was to develop, characterize, and statistically optimize BCM nanoemulsion (BCM-NE) loaded into a gel (BCM-NE gel) to evaluate its potential for improved permeation of BCM through the transdermal route, thereby improving its pharmacokinetic profile. BCM-NE was prepared by o/w spontaneous emulsification method and the effects of different formulation variables on the critical attributes of NE like globule size were investigated by implementing factorial design. The optimized formulation exhibited a mean globule size of 160 ± 6.5 nm, zeta potential of - 20.4 ± 1.23 mV, and drug content of 99.45 ± 1.9%. Ex vivo permeation studies across rat skin exhibited a significant enhancement in permeation, i.e., enhancement ratio (ER) of ~ 7.4 and 5.86 for BCM-NE and BCM-NE gel, respectively, when compared with aqueous BCM suspension gel. In vivo pharmacokinetic studies performed in rats demonstrated a higher and prolonged drug release of BCM from BCM-NE gel when compared to oral aqueous BCM suspension. The AUC_0-t for BCM-NE gel and BCM suspension was found to be 562.54 ± 77.55 and 204.96 ± 51.93 ng/ml h, respectively. The relative bioavailability (%F) of BCM was shown to be enhanced 274% by BCM-NE gel. Histopathological studies demonstrated the safety and biocompatibility of the developed system. All the above results proved that the BCM-NE gel could be a superior and patient-compliant alternative to oral delivery in the management of PD.

Evaluation of chamomile oil and nanoemulgels as a promising treatment option for atopic dermatitis induced in rats

Background: Atopic dermatitis is a chronic inflammatory skin disease that remarkably affects the quality-of-life of patients. Chamomile oil is used to treat skin inflammations. We evaluated the efficacy of chamomile oil and nanoemulgel formulations as a natural alternative therapeutic option for atopic dermatitis.Research design and methods: Formulations were developed comprising chamomile oil: olive oil (1:1), Tween 20/80 or Gelucire 44/14 as surfactant-cosurfactant mixtures, propylene glycol (10%w/w), water and hydroxypropyl methylcellulose (3%w/w). In-vitro physicochemical characterization, stability testing and in-vivo assessment of inflammatory biomarkers and histopathological examination of skin lesions were conducted in rats induced with atopic dermatitis.Results: Nanoemulgels G₁ and X₁ which displayed the smallest particle size of 137.5 ± 2.04 and 207.1 ± 5.44 nm, good homogeneity and high zeta-potential values of -26.4 and -32.7 mV were selected as the optimized emulgel. Nanoemulgels were nonirritating of pH value 5.56, readily spreadable, and were physically stable following 10 heating-cooling cycles. Treatment with nanoemulgels showed a two-fold decrease in duration of skin healing and no spongiosis compared to chamomile oil. Levels of biomarkers were reduced after topical application of both nanoemulgels and chamomile oil.Conclusion: Nanoemulgels are a potential cost effective, safe topical carrier system for chamomile in treating atopic dermatitis.

Preparation, Optimization, and Evaluation of Hyaluronic Acid-Based Hydrogel Loaded with Miconazole Self-Nanoemulsion for the Treatment of Oral Thrush

Miconazole nitrate (MZ) is a BCS class II antifungal poorly water-soluble drug with limited dissolution properties and gastrointestinal side effects. Self-nanoemulsifying delivery system-based gel of MZ can improve both solubility and oral mucosal absorption with enhanced antifungal activity. The study aims to formulate MZ self-nanoemulsion (MZ-NE) and combine it within hyaluronic acid-based gel. MZ solubility in various oils, surfactants, and cosurfactant used in NE formulations were evaluated. Mixture design was implemented to optimize the levels of NE components as a formulation variable to study their effects on the mean globule size and antifungal inhibition zones. Further, the optimized MZ-NE was loaded into a hyaluronic acid gel base. Rheological behavior of the prepared gel was assessed. Ex vivo permeability of optimized formulation across buccal mucous of sheep and inhibition against Candida albicans were examined. Mixture design was used to optimize the composition of MZ-NE formulation as 22, 67, and 10% for clove oil, Labrasol, and propylene glycol, respectively. The optimized formulation indicated globule size of 113 nm with 29 mm inhibition zone. Pseudoplastic flow with thixotropic behavior was observed, which is desirable for oral gels. The optimized formulation exhibited higher ex vivo skin permeability and enhanced antifungal activity by 1.85 and 2.179, respectively, compared to MZ-SNEDDS, and by 1.52 and 1.72 folds, respectively, compared to marketed gel. Optimized MZ-NE hyaluronic acid-based oral gel demonstrated better antifungal activity, indicating its potential in oral thrush pharmacotherapy.

Nanoemulsion: A Review on Mechanisms for the Transdermal Delivery of Hydrophobic and Hydrophilic Drugs

Nanoemulsions (NEs) are colloidal dispersions of two immiscible liquids, oil and water, in which one is dispersed in the other with the aid of a surfactant/co-surfactant mixture, either forming oil-in-water (o/w) or water-in-oil (w/o) nanodroplets systems, with droplets 20–200 nm in size. NEs are easy to prepare and upscale, and they show high variability in their components. They have proven to be very viable, non-invasive, and cost-effective nanocarriers for the enhanced transdermal delivery of a wide range of active compounds that tend to metabolize heavily or suffer from undesirable side effects when taken orally. In addition, the anti-microbial and anti-viral properties of NE components, leading to preservative-free formulations, make NE a very attractive approach for transdermal drug delivery. This review focuses on how NEs mechanistically deliver both lipophilic and hydrophilic drugs through skin layers to reach the blood stream, exerting the desired therapeutic effect. It highlights the mechanisms and strategies executed to effectively deliver drugs, both with o/w and w/o NE types, through the transdermal way. However, the mechanisms reported in the literature are highly diverse, to the extent that a definite mechanism is not conclusive.

Rheological Characterization of Hydrogels from Alginate-Based Nanodispersion

The interest toward alginate and nanoemulsion-based hydrogels is driven by the wide potential of application. These systems have been noticed in several areas, ranging from pharmaceutical, medical, coating, and food industries. In this investigation, hydrogels prepared through in situ calcium ion release, starting from lemongrass essential oil nanodispersions stabilized in alginate aqueous suspensions in the presence of the nonionic surfactant Tween 80, were evaluated. The hydrogels prepared at different concentrations of oil, alginate, and calcium were characterized through rheological tests. Flow curves demonstrate that the hydrogels share shear thinning behavior. Oscillatory tests showed that the strength of the hydrogel network increases with the crosslinker increase, and decreases at low polymer concentrations. The hydrogels were thixotropic materials with a slow time of structural restoration after breakage. Finally, by analyzing the creep recovery data, the hydrogel responses were all fitted to the Burger model. Overall, it was demonstrated that the presence of essential oil in the proposed hydrogels does not affect the mechanical characteristics of the materials, which are mainly influenced by the concentration of polymer and calcium as a crosslinker.

Transdermal Delivery of Snakehead Fish (Ophiocephalus striatus) Nanoemulgel Containing Hydrophobic Powder for Burn Wound

Background: The aim of the present study was to characterize and evaluate the nanoemulgel (NEG) of snakehead fish powder (SFP), as a transdermal delivery system for poorly water soluble drug, in order to conquer the inconveniences related to its oral conveyance. Methods: Diverse nanoemulsion components (oil, surfactant, and co-surfactant) were chosen based on solvency and emulsification capacity. SFP loaded nanoemulsion which tested by stress-stability testing was carried out for all formulations and those that passed these tests were characterized for mean droplet size, polydispersity index (PDI), zeta potential, pH, viscosity, and transmittance. After that, this was continued by permeation studies using snake skin in vitro and rabbit skin in vivo studies i.e. skin irritation study and the effectiveness test. Results: Mean droplet size and zeta potential of the optimized nanoemulsion (NE4) were found to be 98.6 ± 0.93 nm (polydispersity index, PDI = 0.1 ± 0.20) and -57.5 ± 0.3 mV respectively. Optimized nanoemulsion was converted into nanoemulgel with 1.5% w/v of gelling agent (HPMC) and evaluated for pH, viscosity, spreadability, and extrudability measurement. Ex vivo transdermal permeation value for SFP through snake skin as membrane from NEG1, NEG2, NEG3 and marketed SFP cream showed results of 55.65 ± 0.93%, 56.14 ± 0.70%, 66.75 ± 1.03% and 49.80 ± 3.42% respectively in 3 hours. Moreover, all the treatment group did not show skin irritation of each group. The effect of burn wound healing of NEG3 showed a significant (P<0.05) on the measurement of wound area compared to marketed cream. Conclusion: The novel NEG of SFP was successfully formulated for transdermal application based on the results of evaluations and stability tests on accelerating burn wound healing.

Nanoemulsion as pharmaceutical carrier for dermal and transdermal drug delivery: Formulation development, stability issues, basic considerations and applications

The use of nanoemulsion in augmenting dermal and transdermal effectiveness of drugs has now well established. The development of nanoemulsion based semisolid dosage forms is an active area of present research. However, thickening or liquid-to-semisolid conversion of the nanoemulsions provides opportunities to the formulation scientist to explore novel means of solving instability issues during transformation. Extending knowledge about the explicit role of nature/magnitude of zeta potential, types of emulsifiers and selection of appropriate semisolid bases could place these versatile carriers from laboratory to industrial scale. This article reviews the progressive advancement in the delivery of medicament via nanoemulsion with special reference to the dermal and transdermal administration. It is attempted to explore the most suitable semi solid dosage form for the particular type of nanoemulsion (o/w, w/o and others) and effect of particle size and zeta potential on the delivery of drugs through dermal or transdermal route. Finally, this review also highlights the basic principles and fundamental considerations of nanoemulsion manufacture, application of nanoemulsion based semisolid dosage forms in the dermal/transdermal administration and basic considerations during the nanoemulsion absorption into and through skin.