Oral Streptococci Biofilm Formation on Different Implant Surface Topographies

Effect of implant abutment surface treatments on bacterial biofilm composition and structure

Background

For the long-term success of dental implants, implant abutment surface should promote the attachment of oral epithelial cells and reduce bacterial adhesion. Titanium nitride (TiN) coatings show antimicrobial properties. Nevertheless, there is a lack of clinical trials that assess the biofilm formation on TiN abutments in the context of clinical practice. Thus, the objective of this study was to evaluate the effect of different abutment surfaces (machined, TiN and TiN oxidized) on bacterial biofilm composition and structure.

Materials and methods

Implant abutments were connected to the dental implants. Bacterial communities were sampled at 1 and 60 days later. The relationship between surface, periodontal indices and bacterial community dynamics was assessed using 16S rRNA metagenomics. A total of 17 patients were involved in this study (14 included in final analyses: 15 machined, 16 TiN and 14 TiN oxidized abutments).

Results

No significant differences between surfaces were found considering taxa abundance, most alpha diversity metrics or community structure. Time showed a significant effect on diversity and also on the abundance of several bacterial taxa.

Conclusions

These results indicate that the effect of the three tested abutment surfaces on biofilm structure and composition was negligible, whereas patient and time exert strong influences on bacterial biofilm formation at different scales.

In Vitro Evaluation of Bacterial Adhesion of Streptococcus mutans and Enterococcus faecalis on Sand-Blasted, Acid-Etched, and Anodized Titanium Dental Implants

Although the surface modifications of the implant have been widely proposed to enhance the osseointegration, their impact on microbial adhesion is still not explored. The present in vitro study was done to compare the bacterial adhesion of S. mutans and Enterococcus faecalis on sand-blasted acid-etched and anodized titanium dental implants. Three commercially available implants, namely SLA (n = 3), SLActive (n = 3), and TiUnite (n = 3), were inoculated with the prepared broth suspension of S. mutans and E. faecalis, and were incubated at 37°C for 48 h. After incubation, the colonies were counted using direct microscopy and the results were recorded as colony forming units/mL (CFU/mL). Mean CFUs were compared between the three implants by ANOVA and pairwise comparison by Tukey's HSD post hoc test using SPSS Software. p value of < 0.05 was considered to be statistically significant. TiUnite implant showed the highest bacterial adherence for S. mutans (3.49 ± 0.53 × 102 CFU/mL) and E. faecalis (35.14 ± 1.54 × 102 CFU/mL) followed by SLA and SLActive. These data demonstrated statistically significant differences between the three types of implants (P < 0.05). Pairwise comparison showed that there was a statistically significant difference between SLA and TiUnite (P = 0.004) and SLActive and TiUnite (P = 0.001) in terms of S. mutans colony count. In terms of E. faecalis colony count, there was a statistically significant difference between SLA and SLActive (P = 0.000), SLA and TiUnite (P = 0.000) and SLActive and TiUnite (P = 0.000). Compared with sand-blasted and acid-etched dental implants, anodized dental implants showed higher adhesion of S. mutans and E. faecalis.

High release of Candida albicans eDNA as protection for the scaffolding of polymicrobial biofilm formed with Staphylococcus aureus and Streptococcus mutans against the enzymatic activity of DNase I

This study aimed to determine the protective role of the high release of C. albicans extracellular DNA (eDNA) in a polymicrobial biofilm formed by S. aureus and S. mutans in the course of DNase I treatment. A tube-flow biofilm bioreactor was developed to mimic biofilm formation in the oral cavity. eDNA release was quantified by real-time PCR (qPCR) and confocal microscopy analysis were used to determine the concentration and distribution of eDNA and intracellular DNA (iDNA). The mean amount of eDNA released by each species in the polymicrobial was higher than that in monospecies biofilms (S. aureus: 3.1 × 10-2 ng/μl polymicrobial versus 5.1 × 10-4 ng/μl monospecies; S. mutans: 3 × 10-1 ng/μl polymicrobial versus 2.97 × 10-2 ng/μl monospecies; C. albicans: 8.35 ng/μl polymicrobial versus 4.85 ng/μl monospecies). The large amounts of eDNA released by C. albicans (96%) in polymicrobial biofilms protects the S. aureus and S. mutans cells against the degradation by DNase I and dampens the effect of clindamycin.

Efficacy of a Solution Containing 33% Trichloroacetic Acid and Hydrogen Peroxide in Decontaminating Machined vs. Sand-Blasted Acid-Etched Titanium Surfaces

This in vitro study assessed the efficacy of a solution containing 33% trichloroacetic acid (CCl3COOH; TCA) and hydrogen peroxide (H2O2) in decontaminating machined (MAC) and sand-blasted acid-etched (SBAE) titanium surfaces. A total of 80 titanium disks were prepared (40 MAC and 40 SBAE). Streptococcus sanguinis and Enterococcus faecalis strains were incubated on 36 samples, while the remaining 44 were kept as controls. Roughness analysis and scanning electron microscopy were used to evaluate the surface features before and after TCAH2O2 treatment. The viability of human adipose-derived mesenchymal stem cells (ASCs) after TCAH2O2 decontamination was assessed with a chemiluminescent assay along with cell morphology through fluorescent staining. TCAH2O2 preserved the surface topography of MAC and SBAE specimens. It also effectively eradicated bacteria on both types of specimens without altering the surface roughness (p > 0.05). Also, no significant differences in protein adsorption between the pristine and TCAH2O2-treated surfaces were found (p = 0.71 and p = 0.94). While ASC proliferation remained unchanged on MAC surfaces, a decrease was observed on the decontaminated SBAE specimens at 24 and 48 h (p < 0.05), with no difference at 72 h (p > 0.05). Cell morphology showed no significant changes after 72 h on both surface types even after decontamination. This study suggests TCAH2O2 as a promising decontamination agent for titanium surfaces, with potential implications for peri-implant health and treatment outcomes.

Antibacterial Activity of Silver and Gold Particles Formed on Titania Thin Films

Metal-based nanoparticles with antimicrobial activity are gaining a lot of attention in recent years due to the increased antibiotics resistance. The development and the pathogenesis of oral diseases are usually associated with the formation of bacteria biofilms on the surfaces; therefore, it is crucial to investigate the materials and their properties that would reduce bacterial attachment and biofilm formation. This work provides a systematic investigation of the physical-chemical properties and the antibacterial activity of TiO2 thin films decorated by Ag and Au nanoparticles (NP) against Veillonella parvula and Neisseria sicca species associated with oral diseases. TiO2 thin films were formed using reactive magnetron sputtering by obtaining as-deposited amorphous and crystalline TiO2 thin films after annealing. Au and Ag NP were formed using a two-step process: magnetron sputtering of thin metal films and solid-state dewetting. The surface properties and crystallographic nature of TiO2/NP structures were investigated by SEM, XPS, XRD, and optical microscopy. It was found that the higher thickness of Au and Ag thin films results in the formation of the enlarged NPs and increased distance between them, influencing the antibacterial activity of the formed structures. TiO2 surface with AgNP exhibited higher antibacterial efficiency than Au nanostructured titania surfaces and effectively reduced the concentration of the bacteria. The process of the observation and identification of the presence of bacteria using the deep learning technique was realized.

Bioadhesion on Textured Interfaces in the Human Oral Cavity-An In Situ Study

Extensive biofilm formation on materials used in restorative dentistry is a common reason for their failure and the development of oral diseases like peri-implantitis or secondary caries. Therefore, novel materials and strategies that result in reduced biofouling capacities are urgently sought. Previous research suggests that surface structures in the range of bacterial cell sizes seem to be a promising approach to modulate bacterial adhesion and biofilm formation. Here we investigated bioadhesion within the oral cavity on a low surface energy material (perfluorpolyether) with different texture types (line-, hole-, pillar-like), feature sizes in a range from 0.7–4.5 µm and graded distances (0.7–130.5 µm). As a model system, the materials were fixed on splints and exposed to the oral cavity. We analyzed the enzymatic activity of amylase and lysozyme, pellicle formation, and bacterial colonization after 8 h intraoral exposure. In opposite to in vitro experiments, these in situ experiments revealed no clear signs of altered bacterial surface colonization regarding structure dimensions and texture types compared to unstructured substrates or natural enamel. In part, there seemed to be a decreasing trend of adherent cells with increasing periodicities and structure sizes, but this pattern was weak and irregular. Pellicle formation took place on all substrates in an unaltered manner. However, pellicle formation was most pronounced within recessed areas thereby partially masking the three-dimensional character of the surfaces. As the natural pellicle layer is obviously the most dominant prerequisite for bacterial adhesion, colonization in the oral environment cannot be easily controlled by structural means.

Professional Mechanical Tooth Cleaning Method for Dental Implant Surface by Agar Particle Blasting

Oral dysfunction due to peri-implantitis and shortened life of implants has become a major concern. Self-care and removal of oral biofilms by professional mechanical tooth cleaning (PMTC) are indispensable for its prevention. However, if the surface roughness of the implant is increased, it may result in the adhesion of biofilm in the oral cavity. Therefore, the PMTC method can serve for long-term implant management. Calcium carbonate (CaCO₃) has been used as a cleaning method for implant surfaces; however, there is concern that the implant surface roughness could increase due to particle collision. Therefore, in this study, to establish a blasting cleaning method that does not adversely affect the implant surface, a new blasting cleaning method using agar particles was devised and its practical application examined. When the simulated stains were blasted with white alumina (WA) abrasive grains and CaCO₃ particles, the simulated stains were almost removed, the surface roughness changed to a satin-finished surface—which was thought to be due to fine scratches—and the surface roughness increased. Most of the simulated stains were removed on the surface of the sample blasted with glycine particles and agar particles. Conversely, the gloss of the sample surface was maintained after cleaning, and the increase in surface roughness was slight.

Microbial Adhesion and Biofilm Formation on Bioactive Surfaces of Ti-35Nb-7Zr-5Ta Alloy Created by Anodization

This study evaluated the microbial colonization (adhesion and biofilm) on modified surfaces of a titanium alloy, Ti-35Nb-7Zr-5Ta, anodized with Ca and P or F ions, with and without silver deposition. The chemical composition, surface topography, roughness (Ra), and surface free energy were evaluated before and after the surface modifications (anodizing). Adhesion and biofilm formation on saliva-coated discs by primary colonizing species (Streptococcus sanguinis, Streptococcus gordonii, Actinomyces naeslundii) and a periodontal pathogen (Porphyromonasgingivalis) were assessed. The surfaces of titanium alloys were modified after anodizing with volcano-shaped micropores with Ca and P or nanosized with F, both with further silver deposition. There was an increase in the Ra values after micropores formation; CaP surfaces became more hydrophilic than other surfaces, showing the highest polar component. For adhesion, no difference was detected for S. gordonii on all surfaces, and some differences were observed for the other three species. No differences were found for biofilm formation per species on all surfaces. However, S. gordonii biofilm counts on distinct surfaces were lower than S. sanguinis, A. naeslundii, and P. gingivalis on some surfaces. Therefore, anodized Ti-35Nb-7Zr-5Ta affected microbial adhesion and subsequent biofilm, but silver deposition did not hinder the colonization of these microorganisms.

Biofilm formation by Streptococcus mutans and its inhibition by green tea extracts

Dental Caries is considered one of the most existing and worldwide common diseases related to the oral cavity affecting both children and adults. Streptococcus mutans is the main cariogenic microorganism involved in the dental caries progression. Natural products such as herbal plants were found to have less side effects and economic value than those of the chemically synthesized antibiofilm agents. This study aimed to isolate Streptococcus mutans from different oral samples taken from saliva and dental plaques specimens to determine their capability for biofilm formation and to evaluate the antibiofilm activity of aqueous and alcoholic green tea extracts. The results revealed that 35, 4 and 1% of recovered dental plaque isolates exhibited strong, moderate and weak biofilm formation capabilities versus 26, 12 and 2% for those recovered from saliva. Two green tea extracts (aqueous and alcoholic) were tested for their antibiofilm formation activity against some selected S. mutans isolates. The results showed that the minimum biofilm inhibitory concentrations (MBICs) of the alcoholic and aqueous green tea extracts were in the range of 3.1 to 12.5 mg/ml and 6.5 to 50 mg/ml, respectively. Accordingly, green tea extracts can be incorporated in various oral preparations for preventing dental caries.

Oral prosthetic microbiology: aspects related to the oral microbiome, surface properties, and strategies for controlling biofilms

The oral cavity is an environment that allows for the development of complex ecosystems; the placement of prosthetic devices as a consequence of partial or total tooth loss may alter the diversity of microbial communities. Biofilms on the surface of materials used in dental prostheses can promote important changes in the mechanic and aesthetic properties of the material itself and may cause local and systemic diseases for the prosthetic wearer. This review presents the main features of the oral microbiome associated with complete or partial dentures and dental implants. The main diseases associated with microbial colonization of prosthetic surfaces, factors that may affect biofilm formation on prosthetic materials, as well as novel alternative therapies aiming to reduce biofilm formation and/or to eradicate biofilms formed on these materials are also explored.

Relevance of Biofilm Models in Periodontal Research: From Static to Dynamic Systems

Microbial biofilm modeling has improved in sophistication and scope, although only a limited number of standardized protocols are available. This review presents an example of a biofilm model, along with its evolution and application in studying periodontal and peri-implant diseases. In 2011, the ETEP (Etiology and Therapy of Periodontal and Peri-Implant Diseases) research group at the University Complutense of Madrid developed an in vitro biofilm static model using representative bacteria from the subgingival microbiota, demonstrating a pattern of bacterial colonization and maturation similar to in vivo subgingival biofilms. When the model and its methodology were standardized, the ETEP research group employed the validated in vitro biofilm model for testing in different applications. The evolution of this model is described in this manuscript, from the mere observation of biofilm growth and maturation on static models on hydroxyapatite or titanium discs, to the evaluation of the impact of dental implant surface composition and micro-structure using the dynamic biofilm model. This evolution was based on reproducing the ideal microenvironmental conditions for bacterial growth within a bioreactor and reaching the target surfaces using the fluid dynamics mimicking the salivary flow. The development of this relevant biofilm model has become a powerful tool to study the essential processes that regulate the formation and maturation of these important microbial communities, as well as their behavior when exposed to different antimicrobial compounds.

In vitro Interactions between Streptococcus intermedius and Streptococcus salivarius K12 on a Titanium Cylindrical Surface

Peri-implantitis is a steadily rising disease and is caused by oral bacterial pathogens able to form biofilm on implant surfaces and peri-implant tissues, making antibiotics treatment less effective. The use of commercial probiotics against oral pathogens could serve as an alternative to prevent biofilm formation. Streptococcus intermedius is one of the early colonizers of biofilm formation in dental implants. The aim of this study was to model the interaction between S. intermedius and Streptococcus salivarius strain K12, a probiotic bacterium producing bacteriocins. S. intermedius was co-cultured with S. salivarius K12 in an in vitro model simulating the biofilm formation in a dental implant composed by a titanium cylinder system. Biofilm formation rate was assessed by Real-Time PCR quantification of bacterial count and expression levels of luxS gene, used in response to cell density in the biofilm. Biofilm formation, bacteriocin production, luxS expression patterns were found to be already expressed within the first 12 h. More importantly, S. salivarius K12 was able to counter the biofilm formation in a titanium cylinder under the tested condition. In conclusion, our dental implant model may be useful for exploring probiotic-pathogen interaction to find an alternative to antibiotics for peri-implantitis treatment.

How microbes read the map: Effects of implant topography on bacterial adhesion and biofilm formation

Microbes have remarkable capabilities to attach to the surface of implanted medical devices and form biofilms that adversely impact device function and increase the risk of multidrug-resistant infections. The physicochemical properties of biomaterials have long been known to play an important role in biofilm formation. More recently, a series of discoveries in the natural world have stimulated great interest in the use of 3D surface topography to engineer antifouling materials that resist bacterial colonization. There is also increasing evidence that some medical device surface topographies, such as those designed for tissue integration, may unintentionally promote microbial attachment. Despite a number of reviews on surface topography and biofilm control, there is a missing link between how bacteria sense and respond to 3D surface topographies and the rational design of antifouling materials. Motivated by this gap, we present a review of how bacteria interact with surface topographies, and what can be learned from current laboratory studies of microbial adhesion and biofilm formation on specific topographic features and medical devices. We also address specific biocompatibility considerations and discuss how to improve the assessment of the anti-biofilm performance of topographic surfaces. We conclude that 3D surface topography, whether intended or unintended, is an important consideration in the rational design of safe medical devices. Future research on next-generation smart antifouling materials could benefit from a greater focus on translation to real-world applications.

The Bacterial Anti-Adhesive Activity of Double-Etched Titanium (DAE) as a Dental Implant Surface

This work aimed to compare the capability of Streptococcus oralis to adhere to a novel surface, double-etched titanium (DAE), in respect to machined and single-etched titanium. The secondary outcome was to establish which topographical features could affect the interaction between the implant surface and bacteria. The samples’ superficial features were characterized using scanning electron microscopy (SEM) and energy dispersive x-ray spectrometry (EDS), and the wetting properties were tested through sessile methods. The novel surface, the double-etched titanium (DAE), was also analyzed with atomic force microscopy (AFM). S. oralis was inoculated on discs previously incubated in saliva, and then the colony-forming units (CFUs), biomass, and cellular viability were measured at 24 and 48h. SEM observation showed that DAE was characterized by higher porosity and Oxygen (%) in the superficial layer and the measurement of the wetting properties showed higher hydrophilicity. AFM confirmed the presence of a higher superficial nano-roughness. Microbiological analysis showed that DAE discs, coated by pellicle’s proteins, were characterized by significantly lower CFUs at 24 and 48 h with respect to the other two groups. In particular, a significant inverse relationship was shown between the CFUs at 48 h and the values of the wetted area and a direct correlation with the water contact angle. The biomass at 24 h was slightly lower on DAE, but results were not significant concerning the other groups, both at 24 and 48 h. The DAE treatment not only modifies the superficial topography and increased hydrophilicity, but it also increases the Oxygen percentage in the superficial layer, which could contribute to the inhibition of S. oralis adhesion. DAE can be considered a promising treatment for titanium implants to counteract a colonization pioneer microorganism, such as S. oralis.

Adhesion of streptococci to titanium and zirconia

The purpose of this study was to evaluate the adherence of streptococci to disks of titanium (commercially pure titanium: CpTi) and zirconia (tetragonal zirconia polycrystals: TZP). CpTi and yttria-stabilized TZP disks with a mirror-polished surface were used as specimens. The arithmetic mean surface roughness (Ra and Sa) and the surface wettability of the experimental specimens were measured. For analyzing the outermost layer of the experimental specimens, X-ray photoelectron spectroscopy (XPS) analysis was performed. Streptococcus sanguinis, S. gordonii, S. oralis, and S. mutans were used as streptococcal bacterial strains. These bacterial cultures were grown for 24 h on CpTi and TZP. The number of bacterial adhesions was estimated using an ATP-bioluminescent assay, and scanning electron microscope (SEM) observation of the adhered bacterial specimens was performed. No significant differences in surface roughness or wettability were found between CpTi and TZP. In XPS analyses, outermost layer of CpTi included Ti0 and Ti⁴⁺, and outermost layer of TZP included Zr⁴⁺. In the cell adhesion assay, the adherences of S. sanguinis, S. gordonii, and S. oralis to TZP were significantly lower than those to CpTi (p < 0.05); however, significant difference was not observed for S. mutans among the specimens. The adherence to CpTi and TZP of S. mutans was significantly lower than that of S. sanguinis, S. gordonii, and S. oralis. These results were confirmed by SEM. S. sanguinis, S. gordonii, and S. oralis adhered less to TZP than to CpTi, but the adherence of S. mutans was similar to both surfaces. S. mutans was less adherent compare with the other streptococci tested in those specimens.

Comparison of the Microbiota and Inorganic Anion Content in the Saliva of Patients with Gastroesophageal Reflux Disease and Gastroesophageal Reflux Disease-Free Individuals

The oral cavity is one of the most complex microbial environments; however, the complex nature of the salivary microbiota and the level of inorganic anions in the saliva of subjects with and without gastroesophageal reflux disease (GERD) are poorly understood. The primary goals of this pilot research were to assess differences in salivary bacterial community composition and inorganic anion concentrations between patients with GERD and GERD-free people. Thus, the salivary microbiota within both groups was dominated by these genera: Streptococcus, Prevotella, Porphyromonas, Veillonella, Neisseria, Haemophilus, Fusobacterium, Rothia, and Leptotrichia. However, the relative abundances of the genera Actinomyces, Atopobium, Stomatobaculum, Ruminococcaceae_[G-2], Veillonella, and Leptotrichia were significantly higher in the saliva samples of patients with GERD, while the genera Porphyromonas, Gemella, Peptostreptococcus, and Neisseria were less abundant in this group. The concentrations of chloride, phosphate, and sulphate ions in the human saliva varied among all subjects and sampling time. These results broaden our knowledge of the salivary microbial community composition and chemistry of saliva of patients with GERD and GERD-free individuals.

Antibacterial Activity and Impact of Different Antiseptics on Biofilm-Contaminated Implant Surfaces

Several antiseptic agents have been proposed for the treatment of peri-implantitis as a complementary therapeutic strategy in addition to mechanical devices. The aim of this study was to compare six different antiseptics, as well as alternative formulations of the same chemical agent, with respect to their decontamination efficacy and impact on chemical properties of the implant surface. Titanium disks with a micro-rough surface, previously contaminated with Porphyromonas gingivalis and Streptococcus mutans biofilms, were treated for 2 min with different antiseptics (liquid sodium hypochlorite 5.25%, gel sodium hypochlorite 5.25%, liquid chlorhexidine 0.2%, gel chlorhexidine 1%, gel citric acid 40%, and gel orthophosphoric acid 37%) or sterile saline solution (control) and their antibacterial activity as well as their ability to remove biofilm were assessed by viable bacterial count and scanning electron microscopy, respectively. Spectroscopic analysis was also performed on non-contaminated disks after exposure to the antiseptics, in order to detect any change in the elemental composition of the titanium surface. All the antimicrobial formulations examined were effective against P. gingivalis and S. mutans biofilms. SEM analysis revealed however that liquid sodium hypochlorite 5.25% was more effective in dissolving biofilm residues. Spectroscopic analysis detected traces of the antiseptics, probably due to insufficient rinsing of the titanium surfaces. In conclusion, since gel formulations of these antiseptic agents possessed a similar antibacterial activity to the liquid formulations, these may be proposed as alternative treatments given their properties to avoid overflows and increase contact time without significant side effects on the bone.

Structural and Functional Dynamics of Staphylococcus aureus Biofilms and Biofilm Matrix Proteins on Different Clinical Materials

Medical device-associated staphylococcal infections are a common and challenging problem. However, detailed knowledge of staphylococcal biofilm dynamics on clinically relevant surfaces is still limited. In the present study, biofilm formation of the Staphylococcus aureus ATCC 25923 strain was studied on clinically relevant materials-borosilicate glass, plexiglass, hydroxyapatite, titanium and polystyrene-at 18, 42 and 66 h. Materials with the highest surface roughness and porosity (hydroxyapatite and plexiglass) did not promote biofilm formation as efficiently as some other selected materials. Matrix-associated poly-N-acetyl-β-(1-6)-glucosamine (PNAG) was considered important in young (18 h) biofilms, whereas proteins appeared to play a more important role at later stages of biofilm development. A total of 460 proteins were identified from biofilm matrices formed on the indicated materials and time points-from which, 66 proteins were proposed to form the core surfaceome. At 18 h, the appearance of several r-proteins and glycolytic adhesive moonlighters, possibly via an autolysin (AtlA)-mediated release, was demonstrated in all materials, whereas classical surface adhesins, resistance- and virulence-associated proteins displayed greater variation in their abundances depending on the used material. Hydroxyapatite-associated biofilms were more susceptible to antibiotics than biofilms formed on titanium, but no clear correlation between the tolerance and biofilm age was observed. Thus, other factors, possibly the adhesive moonlighters, could have contributed to the observed chemotolerant phenotype. In addition, a protein-dependent matrix network was observed to be already well-established at the 18 h time point. To the best of our knowledge, this is among the first studies shedding light into matrix-associated surfaceomes of S. aureus biofilms grown on different clinically relevant materials and at different time points.

Biofilm formation on dental implants with different surface micro-topography: An in vitro study

OBJECTIVES

To compare biofilm formation on whole dental titanium implants with different surface micro-topography.

METHODS

A multispecies in vitro biofilm model consisting of initial (Streptococcus oralis and Actinomyces naeslundii), early (Veillonella parvula), secondary (Fusobacterium nucleatum) and late colonizers (Porphyromonas gingivalis and Aggregatibacter actinomycetemcomitans) was grown for 96 hr on sterile titanium dental implants with either minimal (S_a : 0.5-1.0 mm) or moderate-roughness titanium surfaces (S_a : 1.1-2.0 mm). The resulting biofilms were studied with Confocal Laser Scanning Microscopy (CLSM) and Scanning Electron Microscope. Concentrations (colony-forming units per mL [CFU/ml]) of each bacterium were measured by quantitative Polymerase Chain Reaction (qPCR) and compared by Student t tests.

RESULTS

A biofilm, located mainly at the peak and lateral areas of the implant threads, was observed on both implant surfaces, with a greater biomass and a greater live/dead ratio in moderate- compared to minimal-roughness surface implants. Statistically significant higher values of total bacteria (mean difference = 2.61 × 10⁷  CFU/ml; 95% confidence interval - CI [1.91 × 10⁶ ; 5.02 × 10⁷ ]; p = 0.036), F. Nucleatum (mean difference = 4.43 × 10⁶  CFU/ml; 95% CI [1.06 × 10⁶ ; 7.80 × 10⁶ ]; p = 0.013) and A. actinomycetemcomitans (mean difference = 2.55 × 10⁷  CFU/ml; 95% CI [1.07 × 10⁷ ; 4.04 × 10⁷ ]; p = 0.002), were found in the moderate- compared to minimal-roughness surface dental implants.

CONCLUSIONS

Implants with moderate-roughness surfaces accumulated more bacterial biomass and significant higher number of pathogenic bacteria (F. nucleatum and A. actinomycetemcomitans), when compared to implants with minimal-roughness surfaces, within a similar biofilm structure.

Antibiofilm peptides against biofilms on titanium and hydroxyapatite surfaces

Biofilms are the main challenges in the treatment of common oral diseases such as caries, gingival and endodontic infection and periimplantitis. Oral plaque is the origin of microbes colonizing in the form of biofilms on hydroxyapatite (tooth) and titanium (dental implant) surfaces. In this study, hydroxyapatite (HA) and titanium (Ti) disks were introduced, and their surface morphology was both qualitatively and quantitatively analyzed by a scanning electron microscope (SEM) and atomic force microscope (AFM). The average roughness of Ti disks (77.6 ± 18.3 nm) was less than that of HA (146.1 ± 38.5 nm) (p < 0.05). Oral multispecies biofilms which were cultured on Ti and HA disks for 6 h and three weeks were visualized by SEM. We investigated the ability of two new antibiofilm peptides, DJK-5 and 1018, to induce killing of bacteria in oral multispecies biofilms on Ti and HA disks. A 6-h treatment by DJK-5 and 1018 (2 or 10 μg/mL) significantly reduced biomass of the multispecies biofilms on both Ti and HA disks. DJK-5 was able to kill more bacteria (40.4-75.9%) than 1018 (30.4-67.0%) on both surfaces (p < 0.05). DJK-5 also led to a more effective killing of microbes after a 3-min treatment of 3-day-old and 3-week-old biofilms on Ti and HA surfaces, compared to peptide 1018 and chlorhexidine (p < 0.05). No significant difference was found in the amount of biofilm killing between Ti and HA surfaces. Both peptide DJK-5 and 1018 may potentially be used as effective antibiofilm agents in clinical dentistry.

Direct Contact Test for Evaluating Bacterial Growth on Machined and Rough Surface Implants: An In Vitro Study

OBJECTIVE

To use a modified direct contact test (DCT) to evaluate the bacterial growth on 3 commercially available implants.

MATERIALS AND METHODS

Streptococcus salivarius growth was tested on 1 machined surface and 2 commercial rough surface implants. Seven implants from each group were fixed to the cover of a 96-well microtiter plate. Bacterial suspension was placed on each implant, and the plate was incubated at 37°C for 1 hour to allow the suspension fluid to evaporate. Fresh medium was added to 7 corresponding wells in the microtiter plate, and the cover holding the implants was placed on the plate to enable immersion of the implant. Noncontaminated implant samples served as control. Bacterial growth was monitored spectrophotometrically at 650 nm for 24 hours.

RESULTS

There was a significant S. salivarius growth in all groups of test implants compared with the control. There was no significant difference between bacterial growth kinetics on treated and nontreated implant surfaces (P = 0.241).

CONCLUSION

Using the DCT, we found no difference in bacterial growth between machined and rough surface implants.

Streptococcus sanguinis biofilm formation & interaction with oral pathogens

Caries and periodontitis are the two most common human dental diseases and are caused by dysbiosis of oral flora. Although commensal microorganisms have been demonstrated to protect against pathogens and promote oral health, most previous studies have addressed pathogenesis rather than commensalism. Streptococcus sanguinis is a commensal bacterium that is abundant in the oral biofilm and whose presence is correlated with health. Here, we focus on the mechanism of biofilm formation in S. sanguinis and the interaction of S. sanguinis with caries- and periodontitis-associated pathogens. In addition, since S. sanguinis is well known as a cause of infective endocarditis, we discuss the relationship between S. sanguinis biofilm formation and its pathogenicity in endocarditis.

Metal TiO2 Nanotube Layers for the Treatment of Dental Implant Infections

Titanium oxide nanotube layers with silver and zinc nanoparticles are attracting increasing attention in the design of bone and dental implants due to their antimicrobial potential and their ability to control host cell adhesion, growth, and differentiation. However, recent reports indicate that the etiology of dental infections is more complex than has been previously considered. Therefore, the antimicrobial potential of dental implants should be evaluated against at least several different microorganisms cooperating in human mouth colonization. In this study, Ag and Zn nanoparticles incorporated into titanium oxide nanotubular layers were studied with regard to how they affect Candida albicans, Candida parapsilosis, and Streptococcus mutans. Layers of titanium oxide nanotubes with an average diameter of 110 nm were fabricated by electrochemical anodization, annealed at 650 °C, and modified with approx. 5 wt % Ag or Zn nanoparticles. The surfaces were examined with the scanning electron microscopy-energy dispersive X-ray analysis, scanning transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and subjected to evaluation of microbial-killing and microbial adhesion-inhibiting potency. In a 1.5 h long adhesion test, the samples were found more effective toward yeast strains than toward S. mutans. In a release-killing test, the microorganisms were almost completely eliminated by the samples, either within 3 h of contact (for S. mutans) or 24 h of contact (for both yeast strains). Although further improvement is advisable, it seems that Ag and Zn nanoparticles incorporated into TiO₂ nanotubular surfaces provide a powerful tool for reducing the incidence of bone implant infections. Their high bidirectional activity (against both Candida species and S. mutans) makes the layers tested particularly promising for the design of dental implants.

The Selective Interaction of Pistacia lentiscus Oil vs. Human Streptococci, an Old Functional Food Revisited with New Tools

Pistacia lentiscus berry oil (LBO) represents a typical vegetal product of the Mediterranean basin that has been formally used in traditional cuisine for 100s of years. In addition to its interesting alimentary properties, this product could represent an interesting candidate in the field of research on the study of new anti-infective agents. In fact, in Mediterranean countries, lentisk oil still continues to be widely used in folk medicine for oral and skin affections, in particular, acute gingivitis, pediatric skin infections such as impetigo and foot plaques, and biofilm related infections often associated with Streptococcus spp. Following these observations, we have hypothesized a “lentisk oil-bacteria” interaction, placing particular emphasis on the different Streptococcal species involved in these oral and skin diseases. In accordance with this hypothesis, the use of standard antimicrobial-antibiofilm methods (MIC, MBC, MBIC) allowed the interesting behavior of these bacteria to be observed and, in this context, the response to lentisk oil appears to be correlated with the pathogenic profile of the considered microorganism. Two probiotic strains of S. salivarius K12/M18 appeared to be non-sensitive to this product, while a set of five different pathogenic strains (S. agalactiae, S. intermedius, S. mitis, S. mutans, S. pyogenes) showed a response that was correlated to the fatty acid metabolic pathway of the considered species. In fact, at different times of bacteria development, selective High Performance Liquid Chromatography analysis of the growth medium containing LBO detected a significant increase in free unsaturated fatty acids (UFAs) in particular oleic, palmitic and linoleic acids, which are already known for their antibacterial activity. In this context, we have hypothesized that LBO could be able to modulate the pathogen/probiotic rate in a Streptococcal population using the fatty acid metabolic pathway to help the probiotic strain. This hypothesis was strengthened by performing antibacterial testing with oleic acid and an in silico evaluation of the Streptococcal MCRA protein, an enzyme involved in the production of saturated fatty acids from UFA. These results show that LBO may have been used in ancient times as a “natural microbial modulating extract” in the prevention of biofilm- associated diseases.

Effects of Two Diode Lasers With and Without Photosensitization on Contaminated Implant Surfaces: An Ex Vivo Study

OBJECTIVE

The aim of this ex vivo study is to assess decontamination potential of two different diode laser wavelengths, with or without the aid of photodynamic therapy, on dental implant surfaces and to evaluate the harmful potential of temperature increase during laser irradiation.

MATERIALS AND METHODS

One hundred thirty-two machined sterile implants were placed into sterile porcine bone blocks with standardized coronal angular bony defects and inoculated with Streptococcus sanguinis. Four different treatment protocols were used: 810 or 980 nm laser, with or without photosensitization. Two nontreated control groups were used, one with samples coated with indocyanine green dye. Samples were rinsed and plated on agar plates for subsequent colony count. Irradiation was repeated without contamination at room temperature and in a 37°C water bath monitoring the temperature variation.

RESULTS

There is a statistically significant decontamination effect when the laser is used. Both wavelengths minimize contamination. There was modest improvement given by the photosensitization being more marked in the 810 nm groups, but was not statistically significant compared to laser only. A critical temperature increase was never observed when the sample was in a 37°C water bath.

CONCLUSIONS

The use of both diode laser wavelengths in implant surface decontamination was efficacious regardless of the use of photosensitization and without dangerous increase of temperature.

Influence of Surface Properties on Adhesion Forces and Attachment of Streptococcus mutans to Zirconia In Vitro

Zirconia is becoming a prevalent material in dentistry. However, any foreign bodies inserted may provide new niches for the bacteria in oral cavity. The object of this study was to explore the effect of surface properties including surface roughness and hydrophobicity on the adhesion and biofilm formation of Streptococcus mutans (S. mutans) to zirconia. Atomic force microscopy was employed to determine the zirconia surface morphology and the adhesion forces between the S. mutans and zirconia. The results showed that the surface roughness was nanoscale and significantly different among tested groups (P < 0.05): Coarse (23.94 ± 2.52 nm) > Medium (17.00 ± 3.81 nm) > Fine (11.89 ± 1.68 nm). The contact angles of the Coarse group were the highest, followed by the Medium and the Fine groups. Increasing the surface roughness and hydrophobicity resulted in an increase of adhesion forces and early attachment (2 h and 4 h) of S. mutans on the zirconia but no influence on the further development of biofilm (6 h~24 h). Our findings suggest that the surface roughness in nanoscale and hydrophobicity of zirconia had influence on the S. mutans initial adhesion force and early attachment instead of whole stages of biofilm formation.

Investigation of the in vitro photocatalytic antibacterial activity of nanocrystalline TiO2 and coupled TiO2/Ag containing copolymer on the surface of medical grade titanium

Antibacterial surfaces have been in the focus of research for years, driven by an unmet clinical need to manage an increasing incidence of implant-associated infections. The use of silver has become a topic of interest because of its proven broad-spectrum antibacterial activity and track record as a coating agent of soft tissue implants and catheters. However, for the time being, the translation of these technological achievements for the improvement of the antibacterial property of hard tissue titanium (Ti) implants remains unsolved. In our study, we focused on the investigation of the photocatalysis mediated antibacterial activity of silver (Ag), and Ti nanoparticles instead of their pharmacological effects. We found that the photosensitisation of commercially pure titanium discs by coating them with an acrylate-based copolymer that embeds coupled Ag/Ti nanoparticles can initiate the photocatalytic decomposition of adsorbed S. salivarius after the irradiation with an ordinary visible light source. The clinical isolate of S. salivarius was characterised with MALDI-TOF mass spectrometer, while the multiplication of the bacteria on the surface of the discs was followed-up by MTT assay. Concerning practical relevance, the infected implant surfaces can be made accessible and irradiated by dental curing units with LED and plasma arc light sources, our research suggests that photocatalytic copolymer coating films may offer a promising solution for the improvement of the antibacterial properties of dental implants.