1
|
Phuphanitcharoenkun S, Louis F, Sowa Y, Matsusaki M, Palaga T. Improving stability of human three dimensional skin equivalents using plasma surface treatment. Biotechnol Bioeng 2024; 121:1950-1960. [PMID: 38470332 DOI: 10.1002/bit.28690] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/21/2023] [Revised: 01/10/2024] [Accepted: 02/19/2024] [Indexed: 03/13/2024]
Abstract
In developing three-dimensional (3D) human skin equivalents (HSEs), preventing dermis and epidermis layer distortion due to the contraction of hydrogels by fibroblasts is a challenging issue. Previously, a fabrication method of HSEs was tested using a modified solid scaffold or a hydrogel matrix in combination with the natural polymer coated onto the tissue culture surface, but the obtained HSEs exhibited skin layer contraction and loss of the skin integrity and barrier functions. In this study, we investigated the method of HSE fabrication that enhances the stability of the skin model by using surface plasma treatment. The results showed that plasma treatment of the tissue culture surface prevented dermal layer shrinkage of HSEs, in contrast to the HSE fabrication using fibronectin coating. The HSEs from plasma-treated surface showed significantly higher transepithelial electrical resistance compared to the fibronectin-coated model. They also expressed markers of epidermal differentiation (keratin 10, keratin 14 and loricrin), epidermal tight junctions (claudin 1 and zonula occludens-1), and extracellular matrix proteins (collagen IV), and exhibited morphological characteristics of the primary human skins. Taken together, the use of plasma surface treatment significantly improves the stability of 3D HSEs with well-defined dermis and epidermis layers and enhanced skin integrity and the barrier functions.
Collapse
Affiliation(s)
- Suphanun Phuphanitcharoenkun
- Graduate Program in Biotechnology, Faculty of Science, Chulalongkorn University, Bangkok, Thailand
- Center of Excellence in Materials and Bio-Interfaces, Chulalongkorn University, Bangkok, Thailand
| | - Fiona Louis
- Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Osaka, Japan
| | - Yoshihiro Sowa
- Department of Plastic and Reconstructive Surgery, Graduate School of Medical Sciences, Kyoto Prefectural University of Medicine, Kyoto, Japan
- Department of Plastic Surgery, Jichi Medical University, Tochigi, Japan
| | - Michiya Matsusaki
- Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Osaka University, Osaka, Japan
- Department of Applied Chemistry, Graduate School of Engineering, Osaka University, Osaka, Japan
| | - Tanapat Palaga
- Center of Excellence in Materials and Bio-Interfaces, Chulalongkorn University, Bangkok, Thailand
- Department of Microbiology, Faculty of Science, Chulalongkorn University, Bangkok, Thailand
| |
Collapse
|
2
|
Jäger J, Vahav I, Thon M, Waaijman T, Spanhaak B, de Kok M, Bhogal RK, Gibbs S, Koning JJ. Reconstructed Human Skin with Hypodermis Shows Essential Role of Adipose Tissue in Skin Metabolism. Tissue Eng Regen Med 2024; 21:499-511. [PMID: 38367122 PMCID: PMC10987437 DOI: 10.1007/s13770-023-00621-1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2023] [Revised: 08/17/2023] [Accepted: 08/27/2023] [Indexed: 02/19/2024] Open
Abstract
BACKGROUND Dysregulation of skin metabolism is associated with a plethora of diseases such as psoriasis and dermatitis. Until now, reconstructed human skin (RhS) models lack the metabolic potential of native human skin, thereby limiting their relevance to study human healthy and diseased skin. We aimed to determine whether incorporation of an adipocyte-containing hypodermis into RhS improves its metabolic potential and to identify major metabolic pathways up-regulated in adipose-RhS. METHODS Primary human keratinocytes, fibroblasts and differentiated adipose-derived stromal cells were co-cultured in a collagen/fibrin scaffold to create an adipose-RhS. The model was extensively characterized structurally in two- and three-dimensions, by cytokine secretion and RNA-sequencing for metabolic enzyme expression. RESULTS Adipose-RhS showed increased secretion of adipokines. Both RhS and adipose-RhS expressed 29 of 35 metabolic genes expressed in ex vivo native human skin. Addition of the adipose layer resulted in up-regulation of 286 genes in the dermal-adipose fraction of which 7 were involved in phase I (CYP19A1, CYP4F22, CYP3A5, ALDH3B2, EPHX3) and phase II (SULT2B1, GPX3) metabolism. Vitamin A, D and carotenoid metabolic pathways were enriched. Additionally, pro-inflammatory (IL-1β, IL-18, IL-23, IL-33, IFN-α2, TNF-α) and anti-inflammatory cytokine (IL-10, IL-12p70) secretion was reduced in adipose-RhS. CONCLUSIONS Adipose-RhS mimics healthy native human skin more closely than traditional RhS since it has a less inflamed phenotype and a higher metabolic activity, indicating the contribution of adipocytes to tissue homeostasis. Therefore it is better suited to study onset of skin diseases and the effect of xenobiotics.
Collapse
Affiliation(s)
- Jonas Jäger
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands
| | - Irit Vahav
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Movement Sciences, Tissue Function & Regeneration, Amsterdam, The Netherlands
| | - Maria Thon
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands
| | - Taco Waaijman
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands
| | - Bas Spanhaak
- Systems Biology Lab, Amsterdam Institute of Molecular and Life Sciences (AIMMS), Vrije Universiteit Amsterdam, Amsterdam, The Netherlands
| | - Michael de Kok
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands
| | | | - Susan Gibbs
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands
- Department of Oral Cell Biology, Academic Centre for Dentistry Amsterdam (ACTA), University of Amsterdam and Vrije Universiteit, Amsterdam, The Netherlands
| | - Jasper J Koning
- Department of Molecular Cell Biology and Immunology, Amsterdam UMC Location Vrije Universiteit Amsterdam, De Boelelaan 1117, Amsterdam, The Netherlands.
- Amsterdam Institute for Infection and Immunity, Inflammatory Diseases, Amsterdam, The Netherlands.
| |
Collapse
|
3
|
Hofmann E, Schwarz A, Fink J, Kamolz LP, Kotzbeck P. Modelling the Complexity of Human Skin In Vitro. Biomedicines 2023; 11:biomedicines11030794. [PMID: 36979772 PMCID: PMC10045055 DOI: 10.3390/biomedicines11030794] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/18/2023] [Revised: 02/17/2023] [Accepted: 02/19/2023] [Indexed: 03/08/2023] Open
Abstract
The skin serves as an important barrier protecting the body from physical, chemical and pathogenic hazards as well as regulating the bi-directional transport of water, ions and nutrients. In order to improve the knowledge on skin structure and function as well as on skin diseases, animal experiments are often employed, but anatomical as well as physiological interspecies differences may result in poor translatability of animal-based data to the clinical situation. In vitro models, such as human reconstructed epidermis or full skin equivalents, are valuable alternatives to animal experiments. Enormous advances have been achieved in establishing skin models of increasing complexity in the past. In this review, human skin structures are described as well as the fast evolving technologies developed to reconstruct the complexity of human skin structures in vitro.
Collapse
Affiliation(s)
- Elisabeth Hofmann
- COREMED—Centre of Regenerative and Precision Medicine, JOANNEUM RESEARCH Forschungsgesellschaft, 8010 Graz, Austria
- Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
- Research Unit for Tissue Regeneration, Repair and Reconstruction, Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
| | - Anna Schwarz
- COREMED—Centre of Regenerative and Precision Medicine, JOANNEUM RESEARCH Forschungsgesellschaft, 8010 Graz, Austria
- Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
- Research Unit for Tissue Regeneration, Repair and Reconstruction, Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
| | - Julia Fink
- COREMED—Centre of Regenerative and Precision Medicine, JOANNEUM RESEARCH Forschungsgesellschaft, 8010 Graz, Austria
- Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
- Research Unit for Tissue Regeneration, Repair and Reconstruction, Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
| | - Lars-Peter Kamolz
- COREMED—Centre of Regenerative and Precision Medicine, JOANNEUM RESEARCH Forschungsgesellschaft, 8010 Graz, Austria
- Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
| | - Petra Kotzbeck
- COREMED—Centre of Regenerative and Precision Medicine, JOANNEUM RESEARCH Forschungsgesellschaft, 8010 Graz, Austria
- Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
- Research Unit for Tissue Regeneration, Repair and Reconstruction, Division of Plastic, Aesthetic and Reconstructive Surgery, Department of Surgery, Medical University of Graz, 8036 Graz, Austria
- Correspondence:
| |
Collapse
|
4
|
Sanchez MM, Tonmoy TI, Park BH, Morgan JT. Development of a Vascularized Human Skin Equivalent with Hypodermis for Photoaging Studies. Biomolecules 2022; 12:biom12121828. [PMID: 36551256 PMCID: PMC9775308 DOI: 10.3390/biom12121828] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2022] [Revised: 12/01/2022] [Accepted: 12/02/2022] [Indexed: 12/13/2022] Open
Abstract
Photoaging is an important extrinsic aging factor leading to altered skin morphology and reduced function. Prior work has revealed a connection between photoaging and loss of subcutaneous fat. Currently, primary models for studying this are in vivo (human samples or animal models) or in vitro models, including human skin equivalents (HSEs). In vivo models are limited by accessibility and cost, while HSEs typically do not include a subcutaneous adipose component. To address this, we developed an "adipose-vascular" HSE (AVHSE) culture method, which includes both hypodermal adipose and vascular cells. Furthermore, we tested AVHSE as a potential model for hypodermal adipose aging via exposure to 0.45 ± 0.15 mW/cm2 385 nm light (UVA). One week of 2 h daily UVA exposure had limited impact on epidermal and vascular components of the AVHSE, but significantly reduced adiposity by approximately 50%. Overall, we have developed a novel method for generating HSE that include vascular and adipose components and demonstrated potential as an aging model using photoaging as an example.
Collapse
|
5
|
Luo H, Wang Z, Qi F, Wang D. Applications of human amniotic fluid stem cells in wound healing. Chin Med J (Engl) 2022; 135:2272-2281. [PMID: 36535008 PMCID: PMC9771343 DOI: 10.1097/cm9.0000000000002076] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/30/2021] [Indexed: 12/23/2022] Open
Abstract
ABSTRACT Complete wound regeneration preserves skin structure and physiological functions, including sensation and perception of stimuli, whereas incomplete wound regeneration results in fibrosis and scarring. Amniotic fluid stem cells (AFSCs) would be a kind of cell population with self-renewing and non-immunogenic ability that have a considerable role in wound generation. They are easy to harvest, culture, and store; moreover, they are non-tumorigenic and not subject to ethical restrictions. They can differentiate into different kinds of cells that replenish the skin, subcutaneous tissues, and accessory organs. Additionally, AFSCs independently produce paracrine effectors and secrete them in exosomes, thereby modulating local immune cell activity. They demonstrate anti-inflammatory and immunomodulatory properties, regulate the physicochemical microenvironment of the wound, and promote full wound regeneration. Thus, AFSCs are potential resources in stem cell therapy, especially in scar-free wound healing. This review describes the biological characteristics and clinical applications of AFSCs in treating wounds and provide new ideas for the treatment of wound healing.
Collapse
Affiliation(s)
- Han Luo
- Department of Plastic Surgery and Burns, The Affiliated Hospital of Zunyl Medical University, Zunyl, Guizhou 563003, China
- Department of Plastic Surgery and Burns, Fuling Central Hospital, Chongqing 408000, China
| | - Zhen Wang
- Department of Plastic Surgery and Burns, The Affiliated Hospital of Zunyl Medical University, Zunyl, Guizhou 563003, China
| | - Fang Qi
- Department of Plastic Surgery and Burns, The Affiliated Hospital of Zunyl Medical University, Zunyl, Guizhou 563003, China
| | - Dali Wang
- Department of Plastic Surgery and Burns, The Affiliated Hospital of Zunyl Medical University, Zunyl, Guizhou 563003, China
| |
Collapse
|
6
|
Khan HM, Liao X, Sheikh BA, Wang Y, Su Z, Guo C, Li Z, Zhou C, Cen Y, Kong Q. Smart biomaterials and their potential applications in tissue engineering. J Mater Chem B 2022; 10:6859-6895. [PMID: 36069198 DOI: 10.1039/d2tb01106a] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
Abstract
Smart biomaterials have been rapidly advancing ever since the concept of tissue engineering was proposed. Interacting with human cells, smart biomaterials can play a key role in novel tissue morphogenesis. Various aspects of biomaterials utilized in or being sought for the goal of encouraging bone regeneration, skin graft engineering, and nerve conduits are discussed in this review. Beginning with bone, this study summarizes all the available bioceramics and materials along with their properties used singly or in conjunction with each other to create scaffolds for bone tissue engineering. A quick overview of the skin-based nanocomposite biomaterials possessing antibacterial properties for wound healing is outlined along with skin regeneration therapies using infrared radiation, electrospinning, and piezoelectricity, which aid in wound healing. Furthermore, a brief overview of bioengineered artificial skin grafts made of various natural and synthetic polymers has been presented. Finally, by examining the interactions between natural and synthetic-based biomaterials and the biological environment, their strengths and drawbacks for constructing peripheral nerve conduits are highlighted. The description of the preclinical outcome of nerve regeneration in injury healed with various natural-based conduits receives special attention. The organic and synthetic worlds collide at the interface of nanomaterials and biological systems, producing a new scientific field including nanomaterial design for tissue engineering.
Collapse
Affiliation(s)
- Haider Mohammed Khan
- Department of Orthopedics, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Xiaoxia Liao
- Department of Burn and Plastic Surgery, West China School of Medicine, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Bilal Ahmed Sheikh
- Department of Orthopedics, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Yixi Wang
- Department of Burn and Plastic Surgery, West China School of Medicine, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Zhixuan Su
- College of Biomedical Engineering, Sichuan University, Chengdu 610064, China.,National Engineering Research Centre for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Chuan Guo
- Department of Orthopedics, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Zhengyong Li
- Department of Burn and Plastic Surgery, West China School of Medicine, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Changchun Zhou
- College of Biomedical Engineering, Sichuan University, Chengdu 610064, China.,National Engineering Research Centre for Biomaterials, Sichuan University, Chengdu 610064, China.
| | - Ying Cen
- Department of Burn and Plastic Surgery, West China School of Medicine, West China Hospital, Sichuan University, 610041, Chengdu, China.
| | - Qingquan Kong
- Department of Orthopedics, West China Hospital, Sichuan University, 610041, Chengdu, China.
| |
Collapse
|
7
|
Advances in Fibrin-Based Materials in Wound Repair: A Review. Molecules 2022; 27:molecules27144504. [PMID: 35889381 PMCID: PMC9322155 DOI: 10.3390/molecules27144504] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/19/2022] [Revised: 06/28/2022] [Accepted: 07/08/2022] [Indexed: 11/29/2022] Open
Abstract
The first bioprocess that occurs in response to wounding is the deterrence of local hemorrhage. This is accomplished by platelet aggregation and initiation of the hemostasis cascade. The resulting blood clot immediately enables the cessation of bleeding and then functions as a provisional matrix for wound healing, which begins a few days after injury. Here, fibrinogen and fibrin fibers are the key players, because they literally serve as scaffolds for tissue regeneration and promote the migration of cells, as well as the ingrowth of tissues. Fibrin is also an important modulator of healing and a host defense system against microbes that effectively maintains incoming leukocytes and acts as reservoir for growth factors. This review presents recent advances in the understanding and applications of fibrin and fibrin-fiber-incorporated biomedical materials applied to wound healing and subsequent tissue repair. It also discusses how fibrin-based materials function through several wound healing stages including physical barrier formation, the entrapment of bacteria, drug and cell delivery, and eventual degradation. Pure fibrin is not mechanically strong and stable enough to act as a singular wound repair material. To alleviate this problem, this paper will demonstrate recent advances in the modification of fibrin with next-generation materials exhibiting enhanced stability and medical efficacy, along with a detailed look at the mechanical properties of fibrin and fibrin-laden materials. Specifically, fibrin-based nanocomposites and their role in wound repair, sustained drug release, cell delivery to wound sites, skin reconstruction, and biomedical applications of drug-loaded fibrin-based materials will be demonstrated and discussed.
Collapse
|
8
|
Heras KL, Igartua M, Santos-Vizcaino E, Hernandez RM. Cell-based dressings: A journey through chronic wound management. BIOMATERIALS ADVANCES 2022; 135:212738. [PMID: 35929212 DOI: 10.1016/j.bioadv.2022.212738] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/12/2021] [Revised: 02/22/2022] [Accepted: 02/25/2022] [Indexed: 06/15/2023]
Abstract
The field of regenerative medicine has undergone a paradigm shift in recent decades thanks to the emergence of novel therapies based on the use of living organisms. The development of cell-based strategies has become a trend for the treatment of different conditions and pathologies. In this sense, the need for more adequate, biomimetic and well-planned treatments for chronic wounds has found different and innovative strategies, based on the combination of cells with dressings, which seek to revolutionize the wound healing management. Therefore, the objective of this review is to analyze the current state and the latest advances in the research of cell-based dressings for chronic wounds, ranging from traditional and "second generation" bioengineered living skin equivalents to mesenchymal stem cell dressings; the latter include biopolymeric porous scaffolds, electrospun nanofiber meshes, hydrogels and 3D printed bio-printed dressings. Finally, this review updates the completed and ongoing clinical trials in this field and encourages researchers to rethink these new approaches, manufacturing processes and mechanisms of action, as well as their administration strategies and timings.
Collapse
Affiliation(s)
- Kevin Las Heras
- NanoBioCel Group, Laboratory of Pharmaceutics, School of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, Vitoria-Gasteiz, Spain
| | - Manoli Igartua
- NanoBioCel Group, Laboratory of Pharmaceutics, School of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Biomedical Research Networking Centre in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, Vitoria-Gasteiz, Spain
| | - Edorta Santos-Vizcaino
- NanoBioCel Group, Laboratory of Pharmaceutics, School of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Biomedical Research Networking Centre in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, Vitoria-Gasteiz, Spain.
| | - Rosa Maria Hernandez
- NanoBioCel Group, Laboratory of Pharmaceutics, School of Pharmacy, University of the Basque Country (UPV/EHU), Paseo de la Universidad 7, 01006 Vitoria-Gasteiz, Spain; Biomedical Research Networking Centre in Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN), 01006 Vitoria-Gasteiz, Spain; Bioaraba, NanoBioCel Research Group, Vitoria-Gasteiz, Spain.
| |
Collapse
|
9
|
Chen YT, Ramalingam L, Garcia CR, Ding Z, Wu J, Moustaid-Moussa N, Li W. Engineering and Characterization of a Biomimetic Microchip for Differentiating Mouse Adipocytes in a 3D Microenvironment. Pharm Res 2022; 39:329-340. [PMID: 35166994 DOI: 10.1007/s11095-022-03195-0] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/20/2021] [Accepted: 02/09/2022] [Indexed: 10/19/2022]
Abstract
Although two-dimensional (2D) cell cultures are the standard in cell research, one pivotal disadvantage is the lack of cell-cell and cell-extracellular matrix (ECM) signaling in the culture milieu. However, such signals occur in three-dimensional (3D) in vivo environments and are essential for cell differentiation, proliferation, and a range of cellular functions. In this study, we developed a microfluidic device to proliferate and differentiate functional adipose tissue and adipocytes by utilizing 3D cell culture technology. This device was used to generate a tissue-specific 3D microenvironment to differentiate 3T3-L1 preadipocytes into either visceral white adipocytes using visceral adipose tissue (VAT) or subcutaneous white adipose tissue (SAT). The microchip has been tested and validated by functional assessments including cell morphology, inflammatory response to a lipopolysaccharide (LPS) challenge, GLUT4 tracking, and gene expression analyses. The biomimetic microfluidic chip is expected to mimic functional adipose tissues that can replace 2D cell cultures and allow for more accurate analysis of adipose tissue physiology.
Collapse
Affiliation(s)
- Yu-Ting Chen
- School of Materials Science & Engineering, Donghu New & High Technology Development Zone, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st road, Wuhan, 430205, People's Republic of China.,Department of Chemical Engineering, Texas Tech University, 807 Canton Ave, Lubbock, TX, 79409, USA
| | - Latha Ramalingam
- Department of Nutritional Sciences, & Obesity Research Institute, Texas Tech University, P.O. Box 41270, Lubbock, TX, 79409, USA.,Department of Nutrition and Food Studies, Syracuse University, Syracuse, NY, 13210, USA
| | - Celine R Garcia
- Department of Chemical Engineering, Texas Tech University, 807 Canton Ave, Lubbock, TX, 79409, USA
| | - Zhenya Ding
- Department of Chemical Engineering, Texas Tech University, 807 Canton Ave, Lubbock, TX, 79409, USA
| | - Jiangyu Wu
- School of Materials Science & Engineering, Donghu New & High Technology Development Zone, Wuhan Institute of Technology, LiuFang Campus, No. 206, Guanggu 1st road, Wuhan, 430205, People's Republic of China.
| | - Naima Moustaid-Moussa
- Department of Nutritional Sciences, & Obesity Research Institute, Texas Tech University, P.O. Box 41270, Lubbock, TX, 79409, USA.
| | - Wei Li
- Department of Chemical Engineering, Texas Tech University, 807 Canton Ave, Lubbock, TX, 79409, USA.
| |
Collapse
|
10
|
Moakes RJA, Senior JJ, Robinson TE, Chipara M, Atanasov A, Naylor A, Metcalfe AD, Smith AM, Grover LM. A suspended layer additive manufacturing approach to the bioprinting of tri-layered skin equivalents. APL Bioeng 2021; 5:046103. [PMID: 34888433 PMCID: PMC8635740 DOI: 10.1063/5.0061361] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/25/2021] [Revised: 03/15/2023] [Accepted: 10/20/2021] [Indexed: 11/17/2022] Open
Abstract
Skin exhibits a complex structure consisting of three predominant layers (epidermis, dermis, and hypodermis). Extensive trauma may result in the loss of these structures and poor repair, in the longer term, forming scarred tissue and associated reduction in function. Although a number of skin replacements exist, there have been no solutions that recapitulate the chemical, mechanical, and biological roles that exist within native skin. This study reports the use of suspended layer additive manufacturing to produce a continuous tri-layered implant, which closely resembles human skin. Through careful control of the bioink composition, gradients (chemical and cellular) were formed throughout the printed construct. Culture of the model demonstrated that over 21 days, the cellular components played a key role in remodeling the supporting matrix into architectures comparable with those of healthy skin. Indeed, it has been demonstrated that even at seven days post-implantation, the integration of the implant had occurred, with mobilization of the adipose tissue from the surrounding tissue into the construct itself. As such, it is believed that these implants can facilitate healing, commencing from the fascia, up toward the skin surface-a mechanism recently shown to be key within deep wounds.
Collapse
Affiliation(s)
- Richard J. A. Moakes
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Jessica J. Senior
- Department of Pharmacy, University of Huddersfield, Queensgate, Huddersfield HD1 3DH, United Kingdom
| | - Thomas E. Robinson
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Miruna Chipara
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Aleksandar Atanasov
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Amy Naylor
- Inflammation and Ageing, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Anthony D. Metcalfe
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| | - Alan M. Smith
- Department of Pharmacy, University of Huddersfield, Queensgate, Huddersfield HD1 3DH, United Kingdom
| | - Liam M. Grover
- School of Chemical Engineering, University of Birmingham, Birmingham B15 2TT, United Kingdom
| |
Collapse
|
11
|
Li J, Fu S, Lu KW, Christie O, Gozelski MT, Cottone MC, Cottone P, Kianian S, Feng KC, Simon M, Rafailovich M, Dagum AB, Singh G. Engineering functional skin constructs: A quantitative comparison of three-dimensional bioprinting with traditional methods. Exp Dermatol 2021; 31:516-527. [PMID: 34727395 DOI: 10.1111/exd.14488] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/10/2021] [Revised: 09/07/2021] [Accepted: 10/15/2021] [Indexed: 11/27/2022]
Abstract
Tissue engineering has been successful in reproducing human skin equivalents while incorporating new approaches such as three-dimensional (3D) bioprinting. The latter method offers a plethora of advantages including increased production scale, ability to incorporate multiple cell types and printing on demand. However, the quality of printed skin equivalents compared to those developed manually has never been assessed. To leverage the benefits of this method, it is imperative that 3D-printed skin should be structurally and functionally similar to real human skin. Here, we developed four bilayered human skin epidermal-dermal equivalents: non-printed dermis and epidermis (NN), printed dermis and epidermis (PP), printed epidermis and non-printed dermis (PN), and non-printed epidermis and printed dermis (NP). The effects of printing induced shear stress [0.025 kPa (epidermis); 0.049 kPa (dermis)] were characterized both at the cellular and at the tissue level. At cellular level, no statistically significant differences in keratinocyte colony-forming efficiency (CFE) (p = 0.1641) were observed. In the case of fibroblasts, no significant differences in the cell alignment index (p < 0.1717) and their ability to contract collagen gel (p = 0.851) were detected. At the tissue levels, all the four skin equivalents were characterized using histological and immunohistochemical analysis with no significant differences found in either epidermal basal cell count, thickness of viable epidermis, and relative intensity of filaggrin and claudin-1. Our results demonstrated that 3D printing can achieve the same high-quality skin constructs as have been developed traditionally, thus opening new avenues for numerous high-throughput industrial and clinical applications.
Collapse
Affiliation(s)
- Juyi Li
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Shi Fu
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Kimberly W Lu
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Olias Christie
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Michael T Gozelski
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Michael C Cottone
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Philip Cottone
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Sara Kianian
- Department of Surgery, Stony Brook University, Stony Brook, New York, USA
| | - Kuan-Che Feng
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Marcia Simon
- Department of Oral Biology and Pathology, Stony Brook University, Stony Brook, New York, USA
| | - Miriam Rafailovich
- Department of Materials Science and Chemical Engineering Stony Brook, Stony Brook University, New York, USA
| | - Alexander B Dagum
- Department of Surgery, Stony Brook University, Stony Brook, New York, USA
| | - Gurtej Singh
- Department of Surgery, Stony Brook University, Stony Brook, New York, USA
| |
Collapse
|
12
|
Bio-engineering a prevascularized human tri-layered skin substitute containing a hypodermis. Acta Biomater 2021; 134:215-227. [PMID: 34303011 DOI: 10.1016/j.actbio.2021.07.033] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/14/2021] [Revised: 07/14/2021] [Accepted: 07/15/2021] [Indexed: 12/17/2022]
Abstract
Severe injuries to skin including hypodermis require full-thickness skin replacement. Here, we bioengineered a tri-layered human skin substitute (TLSS) containing the epidermis, dermis, and hypodermis. The hypodermal layer was generated by differentiation of human adipose stem cells (ASC) in a collagen type I hydrogel and combined with a prevascularized dermis consisting of human dermal microvascular endothelial cells and fibroblasts, which arranged into a dense vascular network. Subsequently, keratinocytes were seeded on top to generate the epidermal layer of the TLSS. The differentiation of ASC into adipocytes was confirmed in vitro on the mRNA level by the presence of adiponectin, as well as by the expression of perilipin and FABP-4 proteins. Moreover, functional characteristics of the hypodermis in vitro and in vivo were evaluated by Oil Red O, BODIPY, and AdipoRed stainings visualizing intracellular lipid droplets. Further, we demonstrated that both undifferentiated ASC and mature adipocytes present in the hypodermis influenced the keratinocyte maturation and homeostasis in the skin substitutes after transplantation. In particular, an enhanced secretion of TGF-β1 by these cells affected the epidermal morphogenesis as assessed by the expression of key proteins involved in the epidermal differentiation including cytokeratin 1, 10, 19 and cornified envelope formation such as involucrin. Here, we propose a novel functional hypodermal-dermo-epidermal tri-layered skin substitute containing blood capillaries that efficiently promote regeneration of skin defects. STATEMENT OF SIGNIFICANCE: The main objective of this study was to develop and assess the usefulness of a tri-layered human prevascularized skin substitute (TLSS) containing an epidermis, dermis, and hypodermis. The bioengineered hypodermis was generated from human adipose mesenchymal stem cells (ASC) and combined with a prevascularized dermis and epidermis. The TLSS represents an exceptional model for studying the role of cell-cell and cell-matrix interactions in vitro and in vivo. In particular, we observed that enhanced secretion of TGF-β1 in the hypodermis exerted a profound impact on fibroblast and keratinocyte differentiation, as well as epidermal barrier formation and homeostasis. Therefore, improved understanding of the cell-cell interactions in such a physiological skin model is essential to gain insights into different aspects of wound healing.
Collapse
|
13
|
Phang SJ, Arumugam B, Kuppusamy UR, Fauzi MB, Looi ML. A review of diabetic wound models-Novel insights into diabetic foot ulcer. J Tissue Eng Regen Med 2021; 15:1051-1068. [PMID: 34551455 DOI: 10.1002/term.3246] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/21/2021] [Revised: 08/06/2021] [Accepted: 09/17/2021] [Indexed: 12/13/2022]
Abstract
Diabetic foot ulcer (DFU) is a major debilitating complication of diabetes. Many research investigations have been conducted with the aims to uncover the diabetic wound healing mechanisms, develop novel therapeutics, and screen bioactive wound dressings in order to improve the current management of DFU. These would have not been possible without the utilization of an appropriate wound model, especially in a diabetic wound context. This review focuses on the different in vitro research models used in DFU investigations such as the 2D scratch wound assay, 3D skin model, and 3D angiogenesis model as well as their limitations. The current efforts and challenges to apply the 2D and 3D in vitro models in a hyperglycemic context to provide insights into DFU modeling will be reviewed. Perspectives of utilizing 3D bioprinting and skin-on-the-chip model as a diabetic wound model in the future will also be highlighted. By leveraging knowledge from past experiences and current research, an improved experimental model for DFU is anticipated to be established in near future.
Collapse
Affiliation(s)
- Shou Jin Phang
- Department of Biomedical Science, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia
| | - Bavani Arumugam
- Department of Biomedical Science, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia
| | - Umah Rani Kuppusamy
- Department of Biomedical Science, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia
| | - Mh Busra Fauzi
- Centre for Tissue Engineering and Regenerative Medicine, Faculty of Medicine, Universiti Kebangsaan Malaysia, Kuala Lumpur, Malaysia
| | - Mee Lee Looi
- Department of Biomedical Science, Faculty of Medicine, University of Malaya, Kuala Lumpur, Malaysia
| |
Collapse
|
14
|
Skin Substitutes for Adults With Diabetic Foot Ulcers and Venous Leg Ulcers: A Health Technology Assessment. ONTARIO HEALTH TECHNOLOGY ASSESSMENT SERIES 2021; 21:1-165. [PMID: 34211616 PMCID: PMC8210978] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
BACKGROUND Wounds may be caused in a variety of ways. Some wounds are difficult to heal, such as diabetic foot ulcers and venous leg ulcers. We conducted a health technology assessment of skin substitutes for adults with neuropathic diabetic foot ulcers and venous leg ulcers, which included an evaluation of effectiveness, safety, cost-effectiveness, the budget impact of publicly funding skin substitutes, and patient preferences and values. METHODS We performed a systematic literature search of the clinical evidence. We assessed the risk of bias of each included study using the Cochrane risk-of-bias tool for randomized studies (version 2), and the quality of the body of evidence according to the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group criteria. We performed a systematic economic literature search and conducted a cost-utility analysis with a 26-week time horizon from a public payer perspective. We also analyzed the budget impact of publicly funding skin substitutes in adults with diabetic foot ulcers and venous leg ulcers in Ontario. We explored the underlying values, needs, and priorities of those who have lived experience with diabetic leg ulcers and venous leg ulcers, as well as their preferences for and perceptions of skin substitutes. RESULTS We included 40 studies in the clinical evidence review. Adults with difficult-to-heal neuropathic diabetic foot ulcers who used dermal (GRADE: High) or multi-layered (GRADE: Moderate) skin substitutes as an adjunct to standard care were more likely to experience complete wound healing than those whose who used standard care alone. Adults with difficult-to-heal venous leg ulcers who used dermal (GRADE: Moderate) or multi-layered (GRADE: High) skin substitutes as an adjunct to standard care were more likely to experience complete wound healing than those who used standard care alone. The evidence for the effectiveness of epidermal skin substitutes was inconclusive for venous leg ulcers because of the small size of the individual studies (GRADE: Very low). We found no studies on epidermal skin substitutes for diabetic foot ulcers. We could not evaluate the safety of skin substitutes versus standard care, because the number of adverse events was either very low or zero (because sample sizes were too small).In our economic analysis, the use of skin substitutes as an adjunct to standard care was more costly and more effective than standard care alone for the treatment of difficult-to-heal diabetic foot ulcers and venous leg ulcers. For diabetic foot ulcers, the incremental cost-effectiveness ratio (ICER) of skin substitutes plus standard care compared with standard care alone was $48,242 per quality-adjusted life-year (QALY), and the cost per ulcer-free week was $158. For venous leg ulcers, the ICER was $1,868,850 per QALY, and the cost per ulcer-free week was $3,235. At the commonly used willingness-to-pay of $50,000 per QALY, the cost-effectiveness of skin substitutes plus standard care versus standard care alone was uncertain (47% probability of being cost-effective) for diabetic foot ulcers and highly unlikely (0% probability of being cost-effective) for venous leg ulcers. At the commonly used willingness-to-pay of $100,000 per QALY, the cost-effectiveness of skin substitutes plus standard care versus standard care alone was moderately likely (71% probability of cost-effectiveness) for people with diabetic foot ulcers and highly unlikely (0% probability of being cost-effective) for people with venous leg ulcers. The annual budget impact of publicly funding skin substitutes in Ontario over the next 5 years would range from an additional $0.17 million in year 1 to $1.2 million in year 5 for people with diabetic foot ulcers, and from $1 million in year 1 to $7.7 million in year 5 for people with venous leg ulcers.Direct patient engagement consisted of three participants for this assessment and 51 from previous health technology assessments that addressed interventions for diabetic foot ulcers and venous leg ulcers. Participants spoke of the negative impact on their quality of life with regard to mobility, employment, social activities, and emotional and mental health. No participants had direct experience using skin substitutes, but participants were open to this treatment option. Barriers to access included the limited use of skin substitutes across Ontario, lack of knowledge of skin substitutes among people with diabetic foot ulcers and venous leg ulcers, and cost. CONCLUSIONS Dermal and multi-layered skin substitutes, when used as an adjunct to standard care, were more effective than standard care alone in completely healing difficult-to-heal neuropathic diabetic foot ulcers and venous leg ulcers in adults. Using skin substitutes as an adjunct to standard care was more costly and more effective than standard care alone for the treatment of difficult-to-heal neuropathic diabetic foot ulcers and venous leg ulcers. For adults with diabetic foot ulcers, the likelihood of skin substitutes being cost-effective compared with standard care depends on the willingness to pay. The likelihood of skin substitutes being cost-effective compared with standard care is uncertain at $50,000 per QALY and moderately likely at $100,000 per QALY. For adults with venous leg ulcers, skin substitutes were highly unlikely to be cost-effective compared with standard care. We estimated that publicly funding skin substitutes in Ontario would result in additional costs of $3 million and $20 million over the next 5 years for people with diabetic foot ulcers and venous leg ulcers, respectively. The people with diabetic foot ulcers and venous leg ulcers we spoke with were open to using skin substitutes as a treatment option.
Collapse
|
15
|
Improving Fibrin Hydrogels' Mechanical Properties, through Addition of Silica or Chitosan-Silica Materials, for Potential Application as Wound Dressings. Int J Biomater 2021; 2021:9933331. [PMID: 34188685 PMCID: PMC8192204 DOI: 10.1155/2021/9933331] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/05/2021] [Revised: 05/22/2021] [Accepted: 05/26/2021] [Indexed: 12/12/2022] Open
Abstract
Fibrin is a protein-based hydrogel formed during blood coagulation. It can also be produced in vitro from human blood plasma, and it is capable of resisting high deformations. However, after each deformation process, it loses high amounts of water, which subsequently makes it mechanically unstable and, finally, difficult to manipulate. The objective of this work was to overcome the in vitro fibrin mechanical instability. The strategy consists of adding silica or chitosan-silica materials and comparing how the different materials electrokinetic-surface properties affect the achieved improvement. The siliceous materials electrostatic and steric stabilization mechanisms, together with plasma protein adsorption on their surfaces, were corroborated by DLS and ζ-potential measurements before fibrin gelling. These properties avoid phase separation, favoring homogeneous incorporation of the solid into the forming fibrin network. Young's modulus of modified fibrin hydrogels was evaluated by AFM to quantitatively measure stiffness. It increased 2.5 times with the addition of 4 mg/mL silica. A similar improvement was achieved with only 0.7 mg/mL chitosan-silica, which highlighted the contribution of hydrophilic chitosan chains to fibrinogen crosslinking. Moreover, these chains avoided the fibroblast growth inhibition onto modified fibrin hydrogels 3D culture observed with silica. In conclusion, 0.7 mg/mL chitosan-silica improved the mechanical stability of fibrin hydrogels with low risks of cytotoxicity. This easy-to-manipulate modified fibrin hydrogel makes it suitable as a wound dressing biomaterial.
Collapse
|
16
|
de Melo BA, Jodat YA, Cruz EM, Benincasa JC, Shin SR, Porcionatto MA. Strategies to use fibrinogen as bioink for 3D bioprinting fibrin-based soft and hard tissues. Acta Biomater 2020; 117:60-76. [PMID: 32949823 DOI: 10.1016/j.actbio.2020.09.024] [Citation(s) in RCA: 85] [Impact Index Per Article: 21.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/21/2020] [Revised: 09/03/2020] [Accepted: 09/11/2020] [Indexed: 12/16/2022]
Abstract
Fibrin gel has been widely used for engineering various types of tissues due to its biocompatible nature, biodegradability, and tunable mechanical and nanofibrous structural properties. Despite their promising regenerative capacity and extensive biocompatibility with various tissue types, fibrin-based biomaterials are often notoriously known as burdensome candidates for 3D biofabrication and bioprinting. The high viscosity of fibrin (crosslinked form) hinders proper ink extrusion, and its pre-polymer form, fibrinogen, is not capable of maintaining shape fidelity. To overcome these limitations and empower fibrinogen-based bioinks for fibrin biomimetics and regenerative applications, different strategies can be practiced. The aim of this review is to report the strategies that bring fabrication compatibility to these bioinks through mixing fibrinogen with printable biomaterials, using supporting bath supplemented with crosslinking agents, and crosslinking fibrin in situ. Moreover, the review discusses some of the recent advances in 3D bioprinting of biomimetic soft and hard tissues using fibrinogen-based bioinks, and highlights the impacts of these strategies on fibrin properties, its bioactivity, and the functionality of the consequent biomimetic tissue. Statement of Significance Due to its biocompatible nature, biodegradability, and tunable mechanical and nanofibrous structural properties, fibrin gel has been widely employed in tissue engineering and more recently, used as in 3D bioprinting. The fibrinogen's poor printable properties make it difficult to maintain the 3D shape of bioprinted constructs. Our work describes the strategies employed in tissue engineering to allow the 3D bioprinting of fibrinogen-based bioinks, such as the combination of fibrinogen with printable biomaterials, the in situ fibrin crosslinking, and the use of supporting bath supplemented with crosslinking agents. Further, this review discuss the application of 3D bioprinting technology to biofabricate fibrin-based soft and hard tissues for biomedical applications, and discuss current limitations and future of such in vitro models.
Collapse
|
17
|
Skin Wound Healing Process and New Emerging Technologies for Skin Wound Care and Regeneration. Pharmaceutics 2020; 12:pharmaceutics12080735. [PMID: 32764269 PMCID: PMC7463929 DOI: 10.3390/pharmaceutics12080735] [Citation(s) in RCA: 491] [Impact Index Per Article: 122.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/22/2020] [Revised: 07/23/2020] [Accepted: 07/31/2020] [Indexed: 12/14/2022] Open
Abstract
Skin wound healing shows an extraordinary cellular function mechanism, unique in nature and involving the interaction of several cells, growth factors and cytokines. Physiological wound healing restores tissue integrity, but in many cases the process is limited to wound repair. Ongoing studies aim to obtain more effective wound therapies with the intention of reducing inpatient costs, providing long-term relief and effective scar healing. The main goal of this comprehensive review is to focus on the progress in wound medication and how it has evolved over the years. The main complications related to the healing process and the clinical management of chronic wounds are described in the review. Moreover, advanced treatment strategies for skin regeneration and experimental techniques for cellular engineering and skin tissue engineering are addressed. Emerging skin regeneration techniques involving scaffolds activated with growth factors, bioactive molecules and genetically modified cells are exploited to overcome wound healing technology limitations and to implement personalized therapy design.
Collapse
|
18
|
Przekora A. A Concise Review on Tissue Engineered Artificial Skin Grafts for Chronic Wound Treatment: Can We Reconstruct Functional Skin Tissue In Vitro? Cells 2020; 9:cells9071622. [PMID: 32640572 PMCID: PMC7407512 DOI: 10.3390/cells9071622] [Citation(s) in RCA: 82] [Impact Index Per Article: 20.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/26/2020] [Revised: 06/17/2020] [Accepted: 06/21/2020] [Indexed: 12/12/2022] Open
Abstract
Chronic wounds occur as a consequence of a prolonged inflammatory phase during the healing process, which precludes skin regeneration. Typical treatment for chronic wounds includes application of autografts, allografts collected from cadaver, and topical delivery of antioxidant, anti-inflammatory, and antibacterial agents. Nevertheless, the mentioned therapies are not sufficient for extensive or deep wounds. Moreover, application of allogeneic skin grafts carries high risk of rejection and treatment failure. Advanced therapies for chronic wounds involve application of bioengineered artificial skin substitutes to overcome graft rejection as well as topical delivery of mesenchymal stem cells to reduce inflammation and accelerate the healing process. This review focuses on the concept of skin tissue engineering, which is a modern approach to chronic wound treatment. The aim of the article is to summarize common therapies for chronic wounds and recent achievements in the development of bioengineered artificial skin constructs, including analysis of biomaterials and cells widely used for skin graft production. This review also presents attempts to reconstruct nerves, pigmentation, and skin appendages (hair follicles, sweat glands) using artificial skin grafts as well as recent trends in the engineering of biomaterials, aiming to produce nanocomposite skin substitutes (nanofilled polymer composites) with controlled antibacterial activity. Finally, the article describes the composition, advantages, and limitations of both newly developed and commercially available bioengineered skin substitutes.
Collapse
Affiliation(s)
- Agata Przekora
- Department of Biochemistry and Biotechnology, Medical University of Lublin, Chodzki 1 Street, 20-093 Lublin, Poland
| |
Collapse
|
19
|
Bikmulina PY, Kosheleva NV, Shpichka AI, Efremov YM, Yusupov VI, Timashev PS, Rochev YA. Beyond 2D: effects of photobiomodulation in 3D tissue-like systems. JOURNAL OF BIOMEDICAL OPTICS 2020; 25:1-16. [PMID: 32351077 PMCID: PMC7189416 DOI: 10.1117/1.jbo.25.4.048001] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/12/2020] [Accepted: 04/09/2020] [Indexed: 05/02/2023]
Abstract
SIGNIFICANCE Currently, various scaffolds with immobilized cells are widely used in tissue engineering and regenerative medicine. However, the physiological activity and cell viability in such constructs might be impaired due to a lack of oxygen and nutrients. Photobiomodulation (PBM) is a promising method of preconditioning cells to increase their metabolic activity and to activate proliferation or differentiation. AIM Investigation of the potential of PBM for stimulation of cell activities in hydrogels. APPROACH Mesenchymal stromal cells (MSCs) isolated from human gingival mucosa were encapsulated in modified fibrin hydrogels with different thicknesses and concentrations. Constructs with cells were subjected to a single-time exposure to red (630 nm) and near-infrared (IR) (840 nm) low-intensity irradiation. After 3 days of cultivation, the viability and physiological activity of the cells were analyzed using confocal microscopy and a set of classical tests for cytotoxicity. RESULTS The cell viability in fibrin hydrogels depended both on the thickness of the hydrogels and the concentration of gel-forming proteins. The PBM was able to improve cell viability in hydrogels. The most pronounced effect was achieved with near-IR irradiation at the 840-nm wavelength. CONCLUSIONS PBM using near-IR light can be applied for stimulation of MSCs metabolism and proliferation in hydrogel-based constructs with thicknesses up to 3 mm.
Collapse
Affiliation(s)
- Polina Y. Bikmulina
- Sechenov First Moscow State Medical University, Institute for Regenerative Medicine, Moscow, Russia
| | - Nastasia V. Kosheleva
- Lomonosov Moscow State University, Faculty of Biology, Moscow, Russia
- FSBSI “Institute of General Pathology and Pathophysiology,” Moscow, Russia
- FSBEI FPE “Russian Medical Academy of Continuous Professional Education,” Ministry of Healthcare of Russia, Moscow, Russia
| | - Anastasia I. Shpichka
- Sechenov First Moscow State Medical University, Institute for Regenerative Medicine, Moscow, Russia
- Lomonosov Moscow State University, Chemistry Department, Moscow, Russia
| | - Yuri M. Efremov
- Sechenov First Moscow State Medical University, Institute for Regenerative Medicine, Moscow, Russia
| | - Vladimir I. Yusupov
- Institute of Photon Technologies of FSRC “Crystallography and Photonics” RAS, Troitsk, Moscow, Russia
| | - Peter S. Timashev
- Sechenov First Moscow State Medical University, Institute for Regenerative Medicine, Moscow, Russia
- Lomonosov Moscow State University, Chemistry Department, Moscow, Russia
- Institute of Photon Technologies of FSRC “Crystallography and Photonics” RAS, Troitsk, Moscow, Russia
- N.N. Semenov Institute of Chemical Physics, Department of Polymers and Composites, Moscow, Russia
| | - Yury A. Rochev
- Sechenov First Moscow State Medical University, Institute for Regenerative Medicine, Moscow, Russia
- National University of Ireland, National Centre for Biomedical Engineering Science, Galway, Ireland
| |
Collapse
|
20
|
Zhu Z, Yuan ZQ, Huang C, Jin R, Sun D, Yang J, Luo XS. Construction of a dermis-fat composite in vivo: Optimizing heterogeneous acellular dermal matrix with in vitro pretreatment. J Tissue Eng Regen Med 2019; 14:215-228. [PMID: 31729841 DOI: 10.1002/term.2986] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/31/2019] [Revised: 09/22/2019] [Accepted: 10/05/2019] [Indexed: 12/14/2022]
Abstract
Dermis-fat composite tissues have been widely used in plastic and reconstructive surgery and were previously constructed using hydrogel-type scaffolds. The constructs can be used for in vitro cosmetic and pharmaceutical testing but are not mechanically strong enough for in vivo applications. In this study, we used heterogeneous (porcine) acellular dermal matrix (PADM) as dermal layer scaffold. PADM was pretreated with the laser micropore technique and then precultured with rat adipose-derived stem cells (rADSCs) in vitro. rADSCs proliferated well on pretreated/unpretreated PADM, showing increased expression of genes associated with inflammatory regulation, proangiogenesis, and stemness, indicating that pretreated/unpretreated PADM both provide a beneficial microenvironment for rADSCs to exert their paracrine function. After in vitro processing, the rADSCs-polyporous PADM and PADM without pretreatments were implanted into the back of rats respectively, followed by adipose tissue transplantation. After implantation, the inflammation induced by pretreated PADM was significantly attenuated and localized compared to the unpretreated group. Moreover, the vascularization was faster, and more adipose tissue was formed in the pretreated group. Sound dermis-fat composite tissue was constructed with sufficient strength, which can potentially be used for actual repair application.
Collapse
Affiliation(s)
- Zhu Zhu
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China.,Shanghai Key Lab of Tissue Engineering, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Zhao-Qi Yuan
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China.,Shanghai Key Lab of Tissue Engineering, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Cheng Huang
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Rui Jin
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Di Sun
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Jun Yang
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| | - Xu-Song Luo
- Department of Plastic and Reconstructive Surgery, Shanghai 9th People's Hospital, Shanghai Jiao Tong University School of Medicine, Shanghai, PR China
| |
Collapse
|
21
|
Baranyi U, Winter B, Gugerell A, Hegedus B, Brostjan C, Laufer G, Messner B. Primary Human Fibroblasts in Culture Switch to a Myofibroblast-Like Phenotype Independently of TGF Beta. Cells 2019; 8:cells8070721. [PMID: 31337073 PMCID: PMC6678602 DOI: 10.3390/cells8070721] [Citation(s) in RCA: 44] [Impact Index Per Article: 8.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2019] [Revised: 06/30/2019] [Accepted: 07/09/2019] [Indexed: 01/01/2023] Open
Abstract
Fibroblasts are the prevalent cell type and main source for extracellular matrix (ECM) in connective tissue. Depending on their origin, fibroblasts play a central role in non-pathological tissue remodeling and disease like fibrosis. This study examined the effect of established culture conditions of primary human fibroblasts, from different origins on the myofibroblast-like phenotype formation. We isolated primary human fibroblasts from aortic adventitia, lung, juvenile- and adult skin and investigated the expression levels of CD90, alpha smooth muscle actin (αSMA) and procollagen I under different concentrations of fetal calf serum (FCS) and ascorbic acid (AA) in culture media by immunoblot and immunofluorescence assays. Furthermore, we determined the viability using XTT and migration/wound healing in scratch assays. Collagen 1 secretion was quantified by specific ELISA. Primary human fibroblasts show in part a myofibroblast-like phenotype even without addition of FCS. Supplemented AA reduces migration of cultured fibroblasts with no or low concentrations of FCS. Furthermore, AA and higher concentrations of FCS in culture media lead to higher levels of collagen 1 secretion instead of procollagen I accumulation. This study provides evidence for a partial switch of primary human fibroblasts of different origin to a myofibroblast-like phenotype under common culture conditions.
Collapse
Affiliation(s)
- Ulrike Baranyi
- Cardiac Surgery Research Laboratory, Department of Surgery, Medical University of Vienna, 1090 Vienna, Austria
| | - Birgitta Winter
- Cardiac Surgery Research Laboratory, Department of Surgery, Medical University of Vienna, 1090 Vienna, Austria
| | - Alfred Gugerell
- Department of Surgery, Medical University of Vienna, 1090 Vienna, Austria
- Department of Cardiology, Medical University of Vienna, 1090 Vienna, Austria
| | - Balazs Hegedus
- Division of Thoracic Surgery, Department of Surgery, Comprehensive Cancer Center Vienna, Medical University of Vienna, 1090 Vienna, Austria
| | - Christine Brostjan
- Department of Surgery, Medical University of Vienna, 1090 Vienna, Austria
| | - Günther Laufer
- Department of Cardiac Surgery, Medical University of Vienna, 1090 Vienna, Austria
| | - Barbara Messner
- Cardiac Surgery Research Laboratory, Department of Surgery, Medical University of Vienna, 1090 Vienna, Austria.
| |
Collapse
|
22
|
Kaur A, Midha S, Giri S, Mohanty S. Functional Skin Grafts: Where Biomaterials Meet Stem Cells. Stem Cells Int 2019; 2019:1286054. [PMID: 31354835 PMCID: PMC6636521 DOI: 10.1155/2019/1286054] [Citation(s) in RCA: 34] [Impact Index Per Article: 6.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/03/2019] [Accepted: 05/21/2019] [Indexed: 12/22/2022] Open
Abstract
Skin tissue engineering has attained several clinical milestones making remarkable progress over the past decades. Skin is inhabited by a plethora of cells spatiotemporally arranged in a 3-dimensional (3D) matrix, creating a complex microenvironment of cell-matrix interactions. This complexity makes it difficult to mimic the native skin structure using conventional tissue engineering approaches. With the advent of newer fabrication strategies, the field is evolving rapidly. However, there is still a long way before an artificial skin substitute can fully mimic the functions and anatomical hierarchy of native human skin. The current focus of skin tissue engineers is primarily to develop a 3D construct that maintains the functionality of cultured cells in a guided manner over a period of time. While several natural and synthetic biopolymers have been translated, only partial clinical success is attained so far. Key challenges include the hierarchical complexity of skin anatomy; compositional mismatch in terms of material properties (stiffness, roughness, wettability) and degradation rate; biological complications like varied cell numbers, cell types, matrix gradients in each layer, varied immune responses, and varied methods of fabrication. In addition, with newer biomaterials being adopted for fabricating patient-specific skin substitutes, issues related to escalating processing costs, scalability, and stability of the constructs under in vivo conditions have raised some concerns. This review provides an overview of the field of skin regenerative medicine, existing clinical therapies, and limitations of the current techniques. We have further elaborated on the upcoming tissue engineering strategies that may serve as promising alternatives for generating functional skin substitutes, the pros and cons associated with each technique, and scope of their translational potential in the treatment of chronic skin ailments.
Collapse
Affiliation(s)
- Amtoj Kaur
- Stem Cell Facility (DBT-Centre of Excellence for Stem Cell Research), All India Institute of Medical Sciences, New Delhi, India
| | - Swati Midha
- Stem Cell Facility (DBT-Centre of Excellence for Stem Cell Research), All India Institute of Medical Sciences, New Delhi, India
| | - Shibashish Giri
- Department of Cell Techniques and Applied Stem Cell Biology, Centre for Biotechnology and Biomedicine, University of Leipzig, Deutscher Platz 5, D-04103 Leipzig, Germany
- Department of Plastic Surgery and Hand Surgery, University Hospital Rechts der Isar, Technische Universität München, Munich, Germany
| | - Sujata Mohanty
- Stem Cell Facility (DBT-Centre of Excellence for Stem Cell Research), All India Institute of Medical Sciences, New Delhi, India
| |
Collapse
|
23
|
Natesan S, Stone R, Coronado RE, Wrice NL, Kowalczewski AC, Zamora DO, Christy RJ. PEGylated Platelet-Free Blood Plasma-Based Hydrogels for Full-Thickness Wound Regeneration. Adv Wound Care (New Rochelle) 2019; 8:323-340. [PMID: 31737420 DOI: 10.1089/wound.2018.0844] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2018] [Accepted: 12/23/2018] [Indexed: 02/03/2023] Open
Abstract
Objective: To develop a cost-effective and clinically usable therapy to treat full-thickness skin injuries. We accomplished this by preparing a viscoelastic hydrogel using polyethylene glycol (PEG)-modified platelet-free plasma (PEGylated PFP) combined with human adipose-derived stem cells (ASCs). Approach: PEGylated PFP hydrogels were prepared by polymerizing the liquid mixture of PEG and PFP±ASCs and gelled either by adding calcium chloride (CaCl2) or thrombin. Rheological and in vitro studies were performed to assess viscoelasticity and the ability of hydrogels to direct ASCs toward a vasculogenic phenotype, respectively. Finally, a pilot study evaluated the efficacy of hydrogels±ASCs using an athymic rat full-thickness skin wound model. Results: Hydrogels prepared within the range of 11 to 27 mM for CaCl2 or 5 to 12.5 U/mL for thrombin exhibited a storage modulus of ∼62 to 87 Pa and ∼47 to 92 Pa, respectively. The PEGylated PFP hydrogels directed ASCs to form network-like structures resembling vasculature, with a fourfold increase in perivascular specific genes that were confirmed by immunofluorescent staining. Hydrogels combined with ASCs exhibited an increase in blood vessel density when applied to excisional rat wounds compared with those treated with hydrogels (110.3 vs. 95.6 BV/mm2; p < 0.05). Furthermore, ASCs were identified in the perivascular region associated with newly forming blood vessels. Innovation: This study demonstrates that PFP modified with PEG along with ASCs can be used to prepare cost-effective stable hydrogels, at the bed-side, to treat extensive skin wounds. Conclusion: These results indicate that PEGylated plasma-based hydrogels combined with ASCs may be a potential regenerative therapy for full-thickness skin wounds.
Collapse
Affiliation(s)
- Shanmugasundaram Natesan
- Combat Trauma and Burn Injury Research, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| | - Randolph Stone
- Combat Trauma and Burn Injury Research, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| | | | - Nicole L. Wrice
- Ocular Trauma & Vision Restoration, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| | - Andrew C. Kowalczewski
- Combat Trauma and Burn Injury Research, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| | - David O. Zamora
- Ocular Trauma & Vision Restoration, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| | - Robert J. Christy
- Combat Trauma and Burn Injury Research, U.S. Army Institute of Surgical Research, Fort Sam Houston, Texas
| |
Collapse
|
24
|
Skeldon G, Lucendo-Villarin B, Shu W. Three-dimensional bioprinting of stem-cell derived tissues for human regenerative medicine. Philos Trans R Soc Lond B Biol Sci 2019; 373:rstb.2017.0224. [PMID: 29786559 DOI: 10.1098/rstb.2017.0224] [Citation(s) in RCA: 24] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 01/15/2018] [Indexed: 12/21/2022] Open
Abstract
Stem cell technology in regenerative medicine has the potential to provide an unlimited supply of cells for drug testing, medical transplantation and academic research. In order to engineer a realistic tissue model using stem cells as an alternative to human tissue, it is essential to create artificial stem cell microenvironment or niches. Three-dimensional (3D) bioprinting is a promising tissue engineering field that offers new opportunities to precisely place stem cells within their niches layer-by-layer. This review covers bioprinting technologies, the current development of 'bio-inks' and how bioprinting has already been applied to stem-cell culture, as well as their applications for human regenerative medicine. The key considerations for bioink properties such as stiffness, stability and biodegradation, biocompatibility and printability are highlighted. Bioprinting of both adult and pluriopotent stem cells for various types of artificial tissues from liver to brain has been reviewed. 3D bioprinting of stem-cell derived tissues for human regenerative medicine is an exciting emerging area that represents opportunities for new research, industries and products as well as future challenges in clinical translation.This article is part of the theme issue 'Designer human tissue: coming to a lab near you'.
Collapse
Affiliation(s)
- Gregor Skeldon
- Department of Biomedical Engineering, University of Strathclyde, Glasgow G4 0NW, UK.,School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS, UK
| | | | - Wenmiao Shu
- Department of Biomedical Engineering, University of Strathclyde, Glasgow G4 0NW, UK
| |
Collapse
|
25
|
Louis F, Kitano S, Mano JF, Matsusaki M. 3D collagen microfibers stimulate the functionality of preadipocytes and maintain the phenotype of mature adipocytes for long term cultures. Acta Biomater 2019; 84:194-207. [PMID: 30502481 DOI: 10.1016/j.actbio.2018.11.048] [Citation(s) in RCA: 49] [Impact Index Per Article: 9.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/05/2018] [Revised: 11/26/2018] [Accepted: 11/27/2018] [Indexed: 12/28/2022]
Abstract
Although adipose tissue is one of the most abundant tissues of the human body, its reconstruction remains a competitive challenge. The conventional in vitro two or three-dimensional (2D or 3D) models of mature adipocytes unfortunately lead to their quick dedifferentiation after one week, and complete differentiation of adipose derived stem cells (ADSC) usually requires more than one month. In this context, we developed biomimetic 3D adipose tissues with high density collagen by mixing type I collagen microfibers with primary mouse mature adipocytes or human ADSC in transwells. These 3D-tissues ensured a better long-term maintained phenotype of unilocular mature adipocytes, compared to 2D, with a viability of 96 ± 2% at day 14 and a good perilipin immunostaining, - the protein necessary for stabilizing the fat vesicles. For comparison, in 2D culture, mature adipocytes released their fat until splitting their single adipose vesicle into several ones with significantly 4 times smaller size. Concerning ADSC, the adipogenic genes expression in 3D-tissues was found at least doubled throughout the differentiation (over 8 times higher for GLUT4 at day 21), along with it, almost 4 times larger fat vesicles were observed (10 ± 4 µm at day 14). Perilipin immunostaining and leptin secretion, the satiety protein, attested the significantly doubled better functionality of ADSC in 3D adipose tissues. These obtained long-term maintained phenotype and fast adipogenesis make this model relevant for either cosmetic/pharmaceutical assays or plastic surgery purposes. STATEMENT OF SIGNIFICANCE: Adipose tissue has important roles in our organism, providing energy from its lipids storage and secreting many vital proteins. However, its reconstruction in a functional in vitro adipose tissue is still a challenge. Mature adipocytes directly extracted from surgery liposuctions quickly lose their lipids after a week in vitro and the use of differentiated adipose stem cells is too time-consuming. We developed a new artificial fat tissue using collagen microfibers. These tissues allowed the maintenance of viable big unilocular mature adipocytes up to two weeks and the faster adipogenic differentiation of adipose stem cells. Moreover, the adipose functionality confirmed by perilipin and leptin assessments makes this model suitable for further applications in cosmetic/pharmaceutical drug assays or for tissue reconstruction.
Collapse
Affiliation(s)
- Fiona Louis
- Osaka University, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Japan
| | - Shiro Kitano
- Osaka University, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Japan
| | - João F Mano
- Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro, Portugal
| | - Michiya Matsusaki
- Osaka University, Joint Research Laboratory (TOPPAN) for Advanced Cell Regulatory Chemistry, Graduate School of Engineering, Japan; Division of Applied Chemistry, Graduate School of Engineering, Osaka University, Japan; JST, PRESTO, Japan.
| |
Collapse
|
26
|
Engineering a Multilayered Skin Substitute with Keratinocytes, Fibroblasts, Adipose-Derived Stem Cells, and Adipocytes. Methods Mol Biol 2019; 1993:149-157. [PMID: 31148085 DOI: 10.1007/978-1-4939-9473-1_12] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/29/2022]
Abstract
A variety of skin substitutes that restore epidermal and dermal structures are currently available on the market. While the main focus in research and clinical application lies in dermal and epidermal substitutes, the development of a subcutaneous replacement, the hypodermis, is often neglected. This chapter describes the use of fibrin sealant as a hydrogel scaffold to generate a three-dimensional skin substitute. For the hypodermal layer adipose-derived stem cells (ASCs) and mature adipocytes are seeded within a fibrin hydrogel. On top, another fibrin clot with incorporated fibroblasts is placed for the construction of the dermal layer. Keratinocytes are added on top of the two-layered construct to form the epidermal layer. The three-layered construct is cultivated for up to 3 weeks with keratinocytes being exposed to air according to the air-liquid interface cultivation model.
Collapse
|
27
|
Heher P, Mühleder S, Mittermayr R, Redl H, Slezak P. Fibrin-based delivery strategies for acute and chronic wound healing. Adv Drug Deliv Rev 2018; 129:134-147. [PMID: 29247766 DOI: 10.1016/j.addr.2017.12.007] [Citation(s) in RCA: 80] [Impact Index Per Article: 13.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/10/2017] [Revised: 10/24/2017] [Accepted: 12/09/2017] [Indexed: 12/17/2022]
Abstract
Fibrin, a natural hydrogel, is the end product of the physiological blood coagulation cascade and naturally involved in wound healing. Beyond its role in hemostasis, it acts as a local reservoir for growth factors and as a provisional matrix for invading cells that drive the regenerative process. Its unique intrinsic features do not only promote wound healing directly via modulation of cell behavior but it can also be fine-tuned to evolve into a delivery system for sustained release of therapeutic biomolecules, cells and gene vectors. To further augment tissue regeneration potential, current strategies exploit and modify the chemical and physical characteristics of fibrin to employ combined incorporation of several factors and their timed release. In this work we show advanced therapeutic approaches employing fibrin matrices in wound healing and cover the many possibilities fibrin offers to the field of regenerative medicine.
Collapse
|
28
|
Sheikholeslam M, Wright MEE, Jeschke MG, Amini-Nik S. Biomaterials for Skin Substitutes. Adv Healthc Mater 2018; 7:10.1002/adhm.201700897. [PMID: 29271580 PMCID: PMC7863571 DOI: 10.1002/adhm.201700897] [Citation(s) in RCA: 107] [Impact Index Per Article: 17.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2017] [Revised: 10/13/2017] [Indexed: 12/13/2022]
Abstract
Patients with extensive burns rely on the use of tissue engineered skin due to a lack of sufficient donor tissue, but it is a challenge to identify reliable and economical scaffold materials and donor cell sources for the generation of a functional skin substitute. The current review attempts to evaluate the performance of the wide range of biomaterials available for generating skin substitutes, including both natural biopolymers and synthetic polymers, in terms of tissue response and potential for use in the operating room. Natural biopolymers display an improved cell response, while synthetic polymers provide better control over chemical composition and mechanical properties. It is suggested that not one material meets all the requirements for a skin substitute. Rather, a composite scaffold fabricated from both natural and synthetic biomaterials may allow for the generation of skin substitutes that meet all clinical requirements including a tailored wound size and type, the degree of burn, the patient age, and the available preparation technique. This review aims to be a valuable directory for researchers in the field to find the optimal material or combination of materials based on their specific application.
Collapse
Affiliation(s)
- Mohammadali Sheikholeslam
- Sunnybrook Research Institute, University of Toronto, Toronto, ON, Canada
- Department of Surgery, Division of Plastic and Reconstructive Surgery, University of Toronto, Toronto, ON, Canada
| | - Meghan E E Wright
- Institute of Biomaterials & Biomedical Engineering, University of Toronto, Toronto, ON, Canada
| | - Marc G Jeschke
- Sunnybrook Research Institute, University of Toronto, Toronto, ON, Canada
- Department of Surgery, Division of Plastic and Reconstructive Surgery, University of Toronto, Toronto, ON, Canada
- Institute of Medical Science, University of Toronto, Toronto, ON, Canada
| | - Saeid Amini-Nik
- Sunnybrook Research Institute, University of Toronto, Toronto, ON, Canada
- Department of Surgery, Division of Plastic and Reconstructive Surgery, University of Toronto, Toronto, ON, Canada
- Department of Laboratory Medicine and Pathobiology, University of Toronto, Toronto, ON, Canada
| |
Collapse
|
29
|
Goodarzi P, Falahzadeh K, Nematizadeh M, Farazandeh P, Payab M, Larijani B, Tayanloo Beik A, Arjmand B. Tissue Engineered Skin Substitutes. ADVANCES IN EXPERIMENTAL MEDICINE AND BIOLOGY 2018; 1107:143-188. [PMID: 29855826 DOI: 10.1007/5584_2018_226] [Citation(s) in RCA: 54] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
Abstract
The fundamental skin role is to supply a supportive barrier to protect body against harmful agents and injuries. Three layers of skin including epidermis, dermis and hypodermis form a sophisticated tissue composed of extracellular matrix (ECM) mainly made of collagens and glycosaminoglycans (GAGs) as a scaffold, different cell types such as keratinocytes, fibroblasts and functional cells embedded in the ECM. When the skin is injured, depends on its severity, the majority of mentioned components are recruited to wound regeneration. Additionally, different growth factors like fibroblast growth factor (FGF), epidermal growth factor (EGF), vascular endothelial growth factor (VEGF) are needed to orchestrated wound healing process. In case of large surface area wounds, natural wound repair seems inefficient. Inspired by nature, scientists in tissue engineering field attempt to engineered constructs mimicking natural healing process to promote skin restoration in untreatable injuries. There are three main types of commercially available engineered skin substitutes including epidermal, dermal, and dermoepidermal. Each of them could be composed of scaffold, desired cell types or growth factors. These substitutes could have autologous, allogeneic, or xenogeneic origin. Moreover, they may be cellular or acellular. They are used to accelerate wound healing and recover normal skin functions with pain relief. Although there are a wide variety of commercially available skin substitutes, almost none of them considered as an ideal equivalents required for proper wound healing.
Collapse
Affiliation(s)
- Parisa Goodarzi
- Brain and Spinal Cord Injury Research Center, Neuroscience Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Khadijeh Falahzadeh
- Metabolomics and Genomics Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Mehran Nematizadeh
- Metabolomics and Genomics Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Parham Farazandeh
- Metabolomics and Genomics Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Moloud Payab
- Obesity and Eating Habits Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Bagher Larijani
- Endocrinology and Metabolism Research Center, Endocrinology and Metabolism Clinical Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Akram Tayanloo Beik
- Cell Therapy and Regenerative Medicine Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran
| | - Babak Arjmand
- Cell Therapy and Regenerative Medicine Research Center, Endocrinology and Metabolism Molecular-Cellular Sciences Institute, Tehran University of Medical Sciences, Tehran, Iran.
| |
Collapse
|
30
|
Belair DG, Abbott BD. Engineering epithelial-stromal interactions in vitro for toxicology assessment. Toxicology 2017; 382:93-107. [PMID: 28285100 DOI: 10.1016/j.tox.2017.03.007] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/17/2017] [Accepted: 03/06/2017] [Indexed: 12/17/2022]
Abstract
Crosstalk between epithelial and stromal cells drives the morphogenesis of ectodermal organs during development and promotes normal mature adult epithelial tissue homeostasis. Epithelial-stromal interactions (ESIs) have historically been examined using mammalian models and ex vivo tissue recombination. Although these approaches have elucidated signaling mechanisms underlying embryonic morphogenesis processes and adult mammalian epithelial tissue function, they are limited by the availability of tissue, low throughput, and human developmental or physiological relevance. In this review, we describe how bioengineered ESIs, using either human stem cells or co-cultures of human primary epithelial and stromal cells, have enabled the development of human in vitro epithelial tissue models that recapitulate the architecture, phenotype, and function of adult human epithelial tissues. We discuss how the strategies used to engineer mature epithelial tissue models in vitro could be extrapolated to instruct the design of organotypic culture models that can recapitulate the structure of embryonic ectodermal tissues and enable the in vitro assessment of events critical to organ/tissue morphogenesis. Given the importance of ESIs towards normal epithelial tissue development and function, such models present a unique opportunity for toxicological screening assays to incorporate ESIs to assess the impact of chemicals on mature and developing epidermal tissues.
Collapse
Affiliation(s)
- David G Belair
- US EPA, Office of Research and Development, National Health and Environmental Effects Research Laboratory, Toxicity Assessment Division, Developmental Toxicology Branch, Research Triangle Park, NC 27711, United States.
| | - Barbara D Abbott
- US EPA, Office of Research and Development, National Health and Environmental Effects Research Laboratory, Toxicity Assessment Division, Developmental Toxicology Branch, Research Triangle Park, NC 27711, United States
| |
Collapse
|
31
|
Limongi T, Tirinato L, Pagliari F, Giugni A, Allione M, Perozziello G, Candeloro P, Di Fabrizio E. Fabrication and Applications of Micro/Nanostructured Devices for Tissue Engineering. NANO-MICRO LETTERS 2017; 9:1. [PMID: 30460298 PMCID: PMC6223775 DOI: 10.1007/s40820-016-0103-7] [Citation(s) in RCA: 85] [Impact Index Per Article: 12.1] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/25/2016] [Accepted: 07/28/2016] [Indexed: 05/17/2023]
Abstract
Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of 1-100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing the dimensions of a material into the nanoscale range usually results in the change of its physiochemical properties such as reactivity, crystallinity, and solubility. This review treats the convergence of last research news at the interface of nanostructured biomaterials and tissue engineering for emerging biomedical technologies such as scaffolding and tissue regeneration. The present review is organized into three main sections. The introduction concerns an overview of the increasing utility of nanostructured materials in the field of tissue engineering. It elucidates how nanotechnology, by working in the submicron length scale, assures the realization of a biocompatible interface that is able to reproduce the physiological cell-matrix interaction. The second, more technical section, concerns the design and fabrication of biocompatible surface characterized by micro- and submicroscale features, using microfabrication, nanolithography, and miscellaneous nanolithographic techniques. In the last part, we review the ongoing tissue engineering application of nanostructured materials and scaffolds in different fields such as neurology, cardiology, orthopedics, and skin tissue regeneration.
Collapse
Affiliation(s)
- Tania Limongi
- SMILEs Lab, Physical Science and Engineering (PSE) and Biological and Environmental Sciences and Engineering (BESE) Divisions, King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| | - Luca Tirinato
- SMILEs Lab, Physical Science and Engineering (PSE) and Biological and Environmental Sciences and Engineering (BESE) Divisions, King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| | - Francesca Pagliari
- Department of Biological and Environmental Sciences and Engineering (BESE), King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| | - Andrea Giugni
- SMILEs Lab, Physical Science and Engineering (PSE) and Biological and Environmental Sciences and Engineering (BESE) Divisions, King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| | - Marco Allione
- SMILEs Lab, Physical Science and Engineering (PSE) and Biological and Environmental Sciences and Engineering (BESE) Divisions, King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| | - Gerardo Perozziello
- Laboratory of Nanotechnology BioNEM, Department of Experimental and Clinical Medicine, University “Magna Graecia” of Catanzaro, Viale Europa - Loc. Germaneto, 88100 Catanzaro, Italy
| | - Patrizio Candeloro
- Laboratory of Nanotechnology BioNEM, Department of Experimental and Clinical Medicine, University “Magna Graecia” of Catanzaro, Viale Europa - Loc. Germaneto, 88100 Catanzaro, Italy
| | - Enzo Di Fabrizio
- SMILEs Lab, Physical Science and Engineering (PSE) and Biological and Environmental Sciences and Engineering (BESE) Divisions, King Abdullah University of Science and Technology, Thuwal, 23955-6900 Kingdom of Saudi Arabia
| |
Collapse
|
32
|
Huber B, Link A, Linke K, Gehrke SA, Winnefeld M, Kluger PJ. Integration of Mature Adipocytes to Build-Up a Functional Three-Layered Full-Skin Equivalent. Tissue Eng Part C Methods 2016; 22:756-64. [PMID: 27334067 PMCID: PMC4991605 DOI: 10.1089/ten.tec.2016.0141] [Citation(s) in RCA: 17] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/04/2023] Open
Abstract
Large, deep full-thickness skin wounds from high-graded burns or trauma are not able to reepithelialize sufficiently, resulting in scar formation, mobility limitations, and cosmetic deformities. In this study, in vitro-constructed tissue replacements are needed. Furthermore, such full-skin equivalents would be helpful as in vivo-like test systems for toxicity, cosmetic, and pharmaceutical testing. Up to date, no skin equivalent is available containing the underlying subcutaneous fatty tissue. In this study, we composed a full-skin equivalent and evaluated three different media for the coculture of mature adipocytes, fibroblasts, and keratinocytes. Therefore, adipocyte medium was supplemented with ascorbyl-2-phosphate and calcium chloride, which are important for successful epidermal stratification (Air medium). This medium was further supplemented with two commercially available factor combinations often used for the in vitro culture of keratinocytes (Air-HKGS and Air-KGM medium). We showed that in all media, keratinocytes differentiated successfully to build a stratified epidermal layer and expressed cytokeratin 10 and 14. Perilipin A-positive adipocytes could be found in all tissue models for up to 14 days, whereas adipocytes in the Air-HKGS and Air-KGM medium seemed to be smaller. Adipocytes in all tissue models were able to release adipocyte-specific factors, whereas the supplementation of keratinocyte-specific factors had a slightly negative effect on adipocyte functionality. The permeability of the epidermis of all models was comparable since they were able to withstand a deep penetration of cytotoxic Triton X in the same manner. Taken together, we were able to compose functional three-layered full-skin equivalents by using the Air medium.
Collapse
Affiliation(s)
- Birgit Huber
- 1 Institute of Interfacial Process Engineering and Plasma Technology, University of Stuttgart , Stuttgart, Germany
| | - Antonia Link
- 2 Reutlingen University , School of Applied Chemistry, Reutlingen, Germany .,3 Fraunhofer Institut for Interfacial Engineering and Biotechnology IGB, Department Cell and Tissue Engineering, Stuttgart, Germany
| | - Kirstin Linke
- 3 Fraunhofer Institut for Interfacial Engineering and Biotechnology IGB, Department Cell and Tissue Engineering, Stuttgart, Germany
| | - Sandra A Gehrke
- 4 Beiersdorf AG, Research and Development , Hamburg, Germany
| | - Marc Winnefeld
- 4 Beiersdorf AG, Research and Development , Hamburg, Germany
| | - Petra J Kluger
- 2 Reutlingen University , School of Applied Chemistry, Reutlingen, Germany .,3 Fraunhofer Institut for Interfacial Engineering and Biotechnology IGB, Department Cell and Tissue Engineering, Stuttgart, Germany
| |
Collapse
|