Collagen/functionalized cellulose nanofibril composite aerogels with pH-responsive characteristics for drug delivery system

In this work, carboxylated and amination modified cellulose nanofibrils (CNFs) were fabricated via the TEMPO catalytic oxidation system and diethylenetriamine, and collagen composite aerogels were fabricated through a simple self-assembly pretreatment and directional freeze-drying technology. Morphology analysis showed that the collagen composite aerogels had distinct layered-oriented double network structures after the self-assembly pretreatment. The intermolecular interactions between the collagen fibrils and functionalized CNFs (fCNFs) on the structures and properties of the composite aerogels were also examined through various characterization techniques. Water contact angle tests demonstrated the pH-responsive characteristics of the collagen/fCNF composite aerogels. Using 5-fluorouracil as the model drug, the pH-response mechanism was revealed. These results indicated that the collagen/fCNF composite aerogels exhibited excellent pH-responsive drug release capacities. Therefore, these pH-responsive collagen composite aerogels might have potential applications in industrial production in the biomedical, drug delivery, and tissue engineering fields.

Chitosan-Based Polymer Blends for Drug Delivery Systems

Polymers have been widely used for the development of drug delivery systems accommodating the regulated release of therapeutic agents in consistent doses over a long period, cyclic dosing, and the adjustable release of both hydrophobic and hydrophilic drugs. Nowadays, polymer blends are increasingly employed in drug development as they generate more promising results when compared to those of homopolymers. This review article describes the recent research efforts focusing on the utilization of chitosan blends with other polymers in an attempt to enhance the properties of chitosan. Furthermore, the various applications of chitosan blends in drug delivery are thoroughly discussed herein. The literature from the past ten years was collected using various search engines such as ScienceDirect, J-Gate, Google Scholar, PubMed, and research data were compiled according to the various novel carrier systems. Nanocarriers made from chitosan and chitosan derivatives have a positive surface charge, which allows for control of the rate, duration, and location of drug release in the body, and can increase the safety and efficacy of the delivery system. Recently developed nanocarriers using chitosan blends have been shown to be cost-effective, more efficacious, and prolonged release carriers that can be incorporated into suitable dosage forms.

Montmorillonite-Rifampicin Nanohybrid for pH-Responsive Release of the Tuberculostatic

The present work describes the development of a hybrid and pH-responsive system for rifampicin using the clay mineral 'montmorillonite' as a nanocarrier. The influence of operational variables on the drug incorporation process was evaluated using 2⁴ factorial designs. Under optimized conditions, the experiment allowed an incorporated drug dose equivalent to 98.60 ± 1.21 mg/g. Hybrid systems were characterized by different characterization techniques (FTIR, XRD, TGA, DSC, and SEM) to elucidate the mechanism of interaction between the compounds used. Through in vitro release studies, it was possible to verify the efficacy of the pH-dependent system obtained, with approximately 70% of the drug released after sixteen hours in simulated intestinal fluid. The adjustment of the experimental release data to the theoretical model of Higuchi and Korsmeyer-Peppas indicated that the release of rifampicin occurs in a prolonged form from montmorillonite. Elucidation of the interactions between the drug and this raw clay reinforces its viability as a novel carrier to develop an anti-TB/clay hybrid system with good physical and chemical stability.

Polyhydroxyalkanoate Decelerates the Release of Paclitaxel from Poly(lactic-co-glycolic acid) Nanoparticles

Biodegradable nanoparticles (NPs) are preferred as drug carriers because of their effectiveness in encapsulating drugs, ability to control drug release, and low cytotoxicity. Although poly(lactide co-glycolide) (PLGA)-based NPs have been used for controlled release strategies, they have some disadvantages. This study describes an approach using biodegradable polyhydroxyalkanoate (PHA) to overcome these challenges. By varying the amount of PHA, NPs were successfully fabricated by a solvent evaporation method. The size range of the NPS ranged from 137.60 to 186.93 nm, and showed zero-order release kinetics of paclitaxel (PTX) for 7 h, and more sustained release profiles compared with NPs composed of PLGA alone. Increasing the amount of PHA improved the PTX loading efficiency of NPs. Overall, these findings suggest that PHA can be used for designing polymeric nanocarriers, which offer a potential strategy for the development of improved drug delivery systems for sustained and controlled release.

Essential Oil-Based Nanoparticles as Antimicrobial Agents in the Food Industry

The use of essential oils (EO) loaded with nanoparticles is the most promising alternative to increase food quality and safety. Interesting works describe the antimicrobial properties of EO for pathogen control in natural and processed foods for human health and animal production, also contributing to sustainability. Their association with different nanosystems allows novel developments in the micronutrition, health promotion, and pathogen control fields, preventing the aggravation of bacterial microevolution and combating antibiotic resistance. Benefits to the environment are also provided, as they are biodegradable and biocompatible. However, such compounds have some physicochemical properties that prevent commercial use. This review focuses on recent developments in antimicrobial EO-based nanoparticles and their application in different food matrices.

Poly (β amino esters) copolymers: Novel potential vectors for delivery of genes and related therapeutics

The unique properties of polymers have performed an essential contribution to the drug delivery system by providing an outstanding platform for the delivery of macromolecules and genes. However, the block copolymers have been the subject of many recently published works whose results have demonstrated excellent performance in drug targeting. Poly(β-amino esters) (PβAEs) copolymers are the synthetic cationic polymers that are tailored by chemically joining PβAEs with other additives to demonstrate extraordinary efficiency in designing pre-defined and pre-programmed nanostructures, site-specific delivery, andovercoming the distinct cellular barriers. Different compositional and structural libraries could be generated by combinatorial chemistry and by the addition of various novel functional additives that fulfill the multiple requirements of targeted delivery. These intriguing attributes allow PβAE-copolymers to have customized therapeutic functions such as excellent encapsulation capacity, high stability, and stimuli-responsive release. Here, we give an overview of PβAE copolymers-based formulations along with focusing on most notable improvements such as structural modifications, bio-conjugations, and stimuli-responsive approaches, for safe and effective nucleic acids delivery.

Nanostructured Lipid Carriers-Hydrogels System for Drug Delivery: Nanohybrid Technology Perspective

Advanced hybrid component development in nanotechnology provides superior functionality in the application of scientific knowledge for the drug delivery industry. The purpose of this paper is to review important nanohybrid perspectives in drug delivery between nanostructured lipid carriers (NLC) and hydrogel systems. The hybrid system may result in the enhancement of each component's synergistic properties in the mechanical strength of the hydrogel and concomitantly decrease aggregation of the NLC. The significant progress in nanostructured lipid carriers-hydrogels is reviewed here, with an emphasis on their preparation, potential applications, advantages, and underlying issues associated with these exciting materials.

Chitosan hydrogels incorporating colloids for sustained drug delivery

In today's biomedical research, a huge effort is being made towards the development of efficient drug delivery systems, achieving sustainable and controlled delivery of drugs. Chitosan (CS) hydrogels are high water content materials with very relevant biological properties to that purpose. Their use for a local and delayed delivery has already been demonstrated for a wide variety of therapeutic agents. One relatively recent strategy to improve these CS-based systems consists in the insertion of colloids, embedding drugs, within their three-dimensional matrix. This provides a second barrier to the diffusion of drugs through the system, and allows to better control their release. The main objective of this review is to report the many existing complex systems composed of CS hydrogels embedding different types of colloids used as drug delivery devices to delay the release of drugs. The various biomedical applications of such final systems are also detailed in this review.

Enhanced In Vitro Wound Healing Using PVA/B-PEI Nanofiber Mats: A Promising Wound Therapeutic Agent against ESKAPE and Opportunistic Pathogens

Opportunistic skin pathogens and their resistance to pre-existing therapeutics are a challenge to normal physiological wound healing processes. Consistent development of antimicrobial agents is required to overcome the complications raised by antimicrobial resistance. An effective alternative proposed in recent research includes the use of antimicrobial nanoparticles or nanobiopolymers. Unfortunately, metallic nanoparticles that have been proven as antimicrobial agents also possess a certain level of toxicity. In this work, we demonstrate the use of a cationic polymer, branched polyethyleneimine (B-PEI), that has been electrospun to obtain a scaffold/fiber (B-PEI NF) mat resulting in a large surface area-to-volume ratio. SEM analysis revealed that the average diameter of the obtained fibers is 240 nm. The formation of nanoscaffold modulates the controlled release of the polymer from the matrix resulting in long-term effects. The antimicrobial and antibiofilm activity of the B-PEI nanofiber (B-PEI NF) was evaluated against ESKAPE pathogens (Pseudomonas aeruginosa and Staphylococcus aureus) and also against Candida albicans. Dose-dependent inhibition was observed for microbial growth and biofilm for all three test organisms, the minimum inhibitory concentration required for inhibiting P. aeruginosa, S. aureus, and C. albicans is 33.125, 26.5, and 19.875 μM, respectively, in 2 mL of bacterial/fungal broth. Crystal violet and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays showed significant reduction in biomass and cell viability of sessile cells, respectively, within the biofilm after treatment using B-PEI NFs. A B-PEI NF matrix promotes cell migration and wound healing processes by mimicking the extracellular matrix. In vitro wound healing studies showed a fivefold increase in cell migration and wound healing by B-PEI NFs (97% wound coverage in 17 h) when compared to B-PEI (15% wound coverage in 17 h). The in vitro wound healing assays confirmed the biocompatibility and better wound healing activity of B-PEI NF mats.

Recent Advancements in Polymer/Liposome Assembly for Drug Delivery: From Surface Modifications to Hybrid Vesicles

Liposomes are consolidated and attractive biomimetic nanocarriers widely used in the field of drug delivery. The structural versatility of liposomes has been exploited for the development of various carriers for the topical or systemic delivery of drugs and bioactive molecules, with the possibility of increasing their bioavailability and stability, and modulating and directing their release, while limiting the side effects at the same time. Nevertheless, first-generation vesicles suffer from some limitations including physical instability, short in vivo circulation lifetime, reduced payload, uncontrolled release properties, and low targeting abilities. Therefore, liposome preparation technology soon took advantage of the possibility of improving vesicle performance using both natural and synthetic polymers. Polymers can easily be synthesized in a controlled manner over a wide range of molecular weights and in a low dispersity range. Their properties are widely tunable and therefore allow the low chemical versatility typical of lipids to be overcome. Moreover, depending on their structure, polymers can be used to create a simple covering on the liposome surface or to intercalate in the phospholipid bilayer to give rise to real hybrid structures. This review illustrates the main strategies implemented in the field of polymer/liposome assembly for drug delivery, with a look at the most recent publications without neglecting basic concepts for a simple and complete understanding by the reader.

Drug dual-release matrix proprieties and the correlations with nanostructure aggregation kinetics for siloxane-polyether/hydrogel nanocomposites

The influence of hydrogels on the nanostructural formation of siloxane-polyether nanocomposites was examined. The nanostructure was studied with small-angle X-ray scattering (SAXS) to determine the siloxane nanostructure aggregation mechanisms. The interactions between matrix and drug were examined by infrared spectroscopy to verify the compatibility of the drug with the matrix. For in vitro release tests Piroxicam was used as a model molecule. The variation of the different types of hydrogels, bis-acrylamide (BIS), poly(acrylamide-co-acrylic acid) (PAM) and polyvinylpyrrolidone (PVP) can modify the drug release profiles. The release behaviour was determined to be composed of two concomitant release mechanisms. The first is in the early stages of drug release, governed by erosion, diffusion and swelling and the second, in advanced stages of release, typical of diffusion through pores. These dependencies were found to be correlated to the physical and chemical properties of the nanocomposites, including the interactions disturbing polycondensation formation. The release rate depends on intramolecular matrix-matrix and intermolecular drug-matrix interactions, as well as a crystalline state of the matrix.

Functional Hybrid Nanoemulsions for Sumatriptan Intranasal Delivery

In recent years, advanced nanohybrid materials processed as pharmaceuticals have proved to be very advantageous. Triptans, such as the commercially available intranasal sumatriptan (SMT), are drugs employed in the treatment of painful migraine symptoms. However, SMT effectiveness by the intranasal route is limited by its high hydrophilicity and poor mucoadhesion. Therefore, we designed hybrid nanoemulsions (NE) composed of copaiba oil as the organic component plus biopolymers (xanthan, pectin, alginate) solubilized in the continuous aqueous phase, aiming at the intranasal release of SMT (2% w/v). Firstly, drug-biopolymer complexes were optimized in order to decrease the hydrophilicity of SMT. The resultant complexes were further encapsulated in copaiba oil-based nanoparticles, forming NE formulations. Characterization by FTIR-ATR, DSC, and TEM techniques exposed details of the molecular arrangement of the hybrid systems. Long-term stability of the hybrid NE at 25°C was confirmed over a year, regarding size (~ 120 nm), polydispersity (~ 0.2), zeta potential (~ −25 mV), and nanoparticle concentration (~ 2.10¹⁴ particles/mL). SMT encapsulation efficiency in the formulations ranged between 41–69%, extending the in vitro release time of SMT from 5 h (free drug) to more than 24 h. The alginate-based NE was selected as the most desirable system and its in vivo nanotoxicity was evaluated in a zebrafish model. Hybrid NE treatment did not affect spontaneous movement or induce morphological changes in zebrafish larvae, and there was no evidence of mortality or cardiotoxicity after 48 h of treatment. With these results, we propose alginate-based nanoemulsions as a potential treatment for migraine pain.

The role of pharmaceutical nanotechnology in the time of COVID-19 pandemic

There is no effective therapy against COVID-19 available so far. In the last months, different drugs have been tested as potential treatments for COVID-19, exhibiting high toxicity and low efficacy. Therefore, nanotechnology can be applied to improve the therapeutic action and minimize the toxicity of loaded drugs. In this review, we summarized the drugs tested as COVID-19 treatment and the advantages of antiviral nanostructured drug-delivery systems. Such systems have demonstrated low in vitro toxicity with better in vitro antiviral activity than free drugs. We believe that this approach should inspire novel nanostructured drug-delivery systems developments to find efficient COVID-19 treatments. Here, we discuss the remaining challenges for such promising nanosystems to be approved for clinical use.

Hybrid Pectin-Liposome Formulation against Multi-Resistant Bacterial Strains

This work describes the development of a gastroresistant antimicrobial formulation composed of two carriers, pectin and liposomes, intended to improve the efficiency of norfloxacin (NOR) against multi-resistant bacterial strains. The formulations showed physicochemical stability for 180 days (4 °C) in terms of size, polydispersity, and zeta potential of the vesicles, prolonging the in vitro release of NOR for 11 h. The hybrid nanocarriers improved the in vitro antimicrobial activity against different multidrug-resistant bacterial strains, such as Salmonella sp., Pseudomonasaeruginosa, E. coli and Campylobacterjejuni, in comparison to commercial NOR and liposomal suspensions. The in vivo toxicity assay in chicken embryos revealed that the hybrid systems were not toxic in any of the different parameters analyzed, a result also corroborated by the analyses of biochemical biomarkers of the chicken-embryos liver function.

Hybrid nanofilms as topical anesthetics for pain-free procedures in dentistry

Topical anesthetics are widely applied in order to relieve the discomfort and anxiety caused by needle insertion and other painful superficial interventions at the oral cavity. So far, there are no commercially available effective topical anesthetic formulations for that purpose, and the most of developments are related to hydrophilic and low mucoadhesive forms. Therefore, we have prepared different hybrid nanofilms composed of biopolymer matrices (chitosan, pectin, and chitosan-pectin) blended with nanostructured lipid carriers (NLC) loading the eutectic mixture of 5% lidocaine-prilocaine (LDC-PLC), in order to fulfill this gap in the market. These dual systems were processed as hybrid nanofilms by the solvent/casting method, and its mucoadhesive, structural and mechanical properties were detailed. The most appropriate hybrid nanofilm combined the advantages of both pectin (PCT) and NLC components. The resultant material presented sustained LDC-PLC release profile for more than 8 h; permeation across porcine buccal mucosa almost twice higher than control and non-cytotoxicity against 3T3 and HACAT cell lines. Then, the in vivo efficacy of PCT/NLC formulation was compared to biopolymer film and commercial drug, exhibiting the longest-lasting anesthetic effect (> 7 h), assessed by tail flick test in mice. These pectin-based hybrid nanofilms open perspectives for clinical trials and applications beyond Dentistry.

Injectable in situ forming nanogel: A hybrid Alginate-NLC formulation extends bupivacaine anesthetic effect

Finding an ideal anesthetic agent for postoperative pain control, with long action and low side effects, is still a challenge. Local anesthetics have potential for such application if their time of action is improved. This work introduces a new hybrid formulation formed by the association of a nanostructured lipid carrier with a biopolymeric system to encapsulate bupivacaine (BVC). The hybrid formulation was physicochemical and structurally characterized by DLS, TEM, DSC, XRD and FTIR-ATR, and it remained stable for 12 months at room temperature. In vivo analgesia and imaging tests showed that the hybrid system was able to modulate the release, and to increase the concentration of BVC at the site of action, by forming a nanogel in situ. Such nanogel improved over 5 times (>24 h) the anesthesia duration, when compared to free BVC at clinical (0.5%) doses. Therefore, this novel in situ-forming nanogel shows great potential to be used in postsurgical pain control, improving the action of BVC, without losing its versatility of (infiltrative) application.

Lipid-based carriers for the delivery of local anesthetics

INTRODUCTION

There is a clinical need for pharmaceutical dosage forms devised to prolong the acting time of local anesthetic (LA) agents or to reduce their toxicity. Encapsulation of LA in drug delivery systems (DDSs) can provide long-term anesthesia for inpatients (e.g. in immediate postsurgical pain control, avoiding the side effects from systemic analgesia) and diminished systemic toxicity for outpatients (in ambulatory/dentistry procedures). The lipid-based formulations described here, such as liposomes, microemulsions, and lipid nanoparticles, have provided several nanotechnological advances and therapeutic alternatives despite some inherent limitations associated with the fabrication processes, costs, and preclinical evaluation models.

AREAS COVERED

A description of the currently promising lipid-based carriers, including liposomes, microemulsions, and nanostructured lipid carriers, followed by a systematic review of the existing lipid-based formulations proposed for LA. Trends in the research of these LA-in-DDS are then exposed, from the point of view of administration route and alternatives for non-traditionally administered LA molecules.

EXPERT OPINION

Considering the current state and potential future developments in the field, we discuss the reasons for why dozens of formulations published every year fail to reach clinical trials; only one lipid-based formulation for the delivery of local anesthetic (Exparel®) has been approved so far.

Solid nanoparticles for oral antimicrobial drug delivery: a review

Most microbial infectious diseases can be treated successfully with the remarkable array of antimicrobials current available; however, antimicrobial resistance, adverse effects, and the high cost of antimicrobials are crucial health challenges worldwide. One of the common efforts in addressing this issue lies in improving the existing antibacterial delivery systems. Solid nanoparticles (SNPs) have been widely used as promising strategies to overcome these challenges. In addition, oral delivery is the most common method of drug administration with high levels of patient acceptance. Formulation into NPs can improve drug stability in the harsh gastrointestinal (GI) tract environment, providing opportunities for targeting specific sites in the GI tract, increasing drug solubility and bioavailability, and providing sustained release in the GI tract. Here, we discuss SNPs for the oral delivery of antimicrobials, including solid lipid NPs (SLNs), polymeric NPs (PNs), mesoporous silica NPs (MSNs) and hybrid NPs (HNs). We also discussed about the role of nanotechnology in IV to oral antimicrobial therapy development as well as challenges, clinical transformation, and limitations of SNPs for oral antimicrobial drug delivery.

Toughening of Poly(L-lactide) with Blends of Poly(ε-caprolactone-co-L-lactide) in the Presence of Chain Extender

A poly(ε-caprolactone-co-L-lactide) copolyester was synthesized and employed to toughen poly(L-lactide) (PLLA) by reactive melt blending in the presence of an epoxy-based chain extender. The effects of chain extension reaction and copolyester content on properties of PLLA-based blends were studied. The chain extension reaction reduced crystallinity and melt flow index of PLLA/copolyester blends. Meanwhile the copolyester blending improved the crystallinities of the chain-extended PLLA up to 20 wt% copolyester. The phase compatibility between PLLA matrix and dispersed copolyester phases was enhanced by the chain extension reaction. The impact strength of chain-extended PLLA increased with the contents of copolyester and chain extender.