Voltammetry Determination of Pb(II), Cd(II), and Zn(II) at Bismuth Film Electrode Combined with 8-Hydroxyquinoline as a Complexing Agent

Efficient biosorption of Zn(II), Cd(II), and Pb(II) by Aspergillus brasiliensis in industrial wastewater coupled with electrochemical monitoring via sensor enhanced with modified silver nanoparticles

This work investigates the use of Aspergillus brasiliensis, this particular species of Aspergillus, as a biosorbent for the first time. It is employed to biosorption Zn(II), Cd(II), and Pb(II) and combines the biosorption experiments with electrochemical measurements for in situ analysis. For the experiments, a batch system was employed with the dead biomass. In order to determine the biosorption capacity, the impact of several operational parameters was examined, including pH, temperature, agitation speed, contact time, and initial metal concentration, and the optimum values were 5, 30 °C, 150 rpm, 2 h, and 150 ppm, respectively. Using 0.2 g biomass in 100 mL solution, the maximal uptake of Zn(II), Cd(II), and Pb(II) at ideal conditions was determined to be 33.67, 24.51, and 36.76, respectively. The Langmuir and Freundlich isotherm model was studied for the biosorption process. An electrochemical sensor using nanomaterials is designed and constructed to monitor the concentration of these metals. The silver nanoparticles functionalized with thiosemicarbazide and 6-mercaptohexanoic acid (mercaptohexanoylhydrazinecarbothioamide-coated silver nanoparticles, MHHC-AgNPs) linked to the carboxylated multi-walled carbon nanotubes (MWCNTs) were utilized for glassy carbon electrode modification (MHHC-AgNPs/MWCNTs/GCE). The concentration range of Zn(II) is 0.7-173 µg/L, Cd(II) is 1.18-293 µg/L, and Pb(II) is 2.17-540 µg/L. The detection limits for Zn(II), Cd(II), and Pb(II) are 0.036 µg/L, 0.15 µg/L, and 0.16 µg/L, respectively. Under optimized conditions, these results were obtained using the differential pulse anodic stripping voltammetry method (DPASV). The successful detection of Zn(II), Cd(II), and Pb(II) was achieved by effectively preventing interference from other common ions. It was effectively employed for measuring ions in industrial wastewater, and the results obtained aligned with those acquired from an atomic absorption spectrometer (AAS). Thus, Aspergillus brasiliensis species, along with this electrochemical sensor, can be used to remediate and monitor environmental pollution, Zn(II), Cd(II), and Pb(II), successfully.

Recent advances in the modification of electrodes for trace metal analysis: a review

This review paper summarizes the research published in the last five years on using different compounds and/or materials as modifiers for electrodes employed in trace heavy metal analysis. The main groups of modifiers are identified, and their single or combined application on the surface of the electrodes is discussed. Nanomaterials, film-forming substances, and polymers are among the most used compounds employed mainly in the modification of glassy carbon, screen-printed, and carbon paste electrodes. Composites composed of several compounds and/or materials have also found growing interest in the development of modified electrodes. Environmentally friendly substances and natural products (mainly biopolymers and plant extracts) have continued to be included in the modification of electrodes for trace heavy metal analysis. The main analytical performance parameters of the modified electrodes as well as possible interferences affecting the determination of the target analytes, are discussed. Finally, a critical evaluation of the main findings from these studies and an outlook discussing possible improvements in this area of research are presented.

An Electrochemical Sensor for the Determination of Trace Concentrations of Cadmium, Based on Spherical Glassy Carbon and Nanotubes

The practical application of a novel, eco-friendly electrochemical sensor based on low-dimensional structures, spherical glassy carbon microparticles, and multiwall carbon nanotubes is described. This sensor, modified with a bismuth film, was used for the determination of Cd(II) by the anodic stripping voltammetric method. The instrumental and chemical factors influencing the sensitivity of the procedure were thoroughly investigated and their most favorable values were selected (acetate buffer solution pH = 3 ± 0.1; 0.15 mmol L-1 Bi(III); activation potential/time: -2 V/3 s; accumulation potential/time: -0.9 V/50 s). Under the selected conditions, the method exhibited linearity in the range of 2 × 10-9 to 2 × 10-7 mol L-1 Cd(II) with a detection limit of 6.2 × 10-10 mol L-1 Cd(II). The results obtained also showed that the application of the sensor for Cd(II) detection did not experience any significant interference in the presence of a number of foreign ions. The applicability of this procedure was evaluated using TM-25.5 Environmental Matrix Reference Material and SPS-WW1 Waste Water Certified Reference Material as well as river water samples through addition and recovery tests.

Development of a Novel Electrochemical Sensor Based on Gold Nanoparticle-Modified Carbon-Paste Electrode for the Detection of Congo Red Dye

In this study, gold nanoparticles (AuNPs) were electrodeposited on samples of a carbon-paste electrode (CPE) with different thicknesses. The prepared AuNPs were characterized using different analysis techniques, such as FTIR, UV-Vis, SEM, EDX, TEM images, and XRD analysis. The fabricated modified electrode AuNPs/CPE was used for the sensitive detection of Congo red (CR) dye. Electrochemical sensing was conducted using square-wave voltammetry (SWV) in a 0.1 M acetate buffer solution at pH 6.5. The proposed sensor exhibited high efficiency for the electrochemical determination of CR dye with high selectivity and sensitivity and a low detection limit of 0.07 μM in the concentration range of 1-30 μM and 0.7 μM in the concentration range of 50-200 μM. The practical application of the AuNPs/CPE was verified by detecting CR dye in various real samples involving jelly, candy, wastewater, and tap water. The calculated recoveries (88-106%) were within the acceptable range.

A Novel Carbon Paste Electrode Modified with N1-Hydroxy-N1,N2-Diphenylbenzamidine for the Electrochemical Determination of Cadmium(II) in Environmental Samples

The present study introduces a novel electrode for rapid, highly sensitive, and selective electrochemical sensor for cadmium(II) using 5% N¹-hydroxy-N¹,N²-diphenylbenzamidine (HDPBA) modified carbon paste electrode (CPE) (HDPBA‒CPE). Surface characterizations and structural analysis of the proposed HDPBA‒CPE were performed using several analytical techniques. The voltammetric measurements of Cd(II) were conducted by cyclic voltammetry (CV) and square wave anodic stripping voltammetry (SWASV). Several experimental conditions such as composition and pH of buffer solutions, HDPBA composition, accumulation potential and time, and other voltammetric conditions were optimized. Cd(II) was preconcentrated on the modified electrode surface for 270 s using Britton Robinson (B-R) buffer (0.1 M, pH 4) at -1.0 V versus Ag/AgCl, followed by electrochemical oxidation of the accumulated Cd(II) in the positive scan of SWASV after a quiet time of 10 s. Under optimized parameters, the proposed method showed a linear range of 0.3-100 nM Cd(II) with a detection limit of 0.032 nM. The fabricated HDPBA-modified carbon paste electrode exhibited excellent sensitivity, selectivity, stability, and reproducibility (with RSD of 3.8%). The developed HDPBA‒CPE was used for the quantification of Cd(II) in tobacco and environmental water samples, and it was found to be applicable for the determination of different types of real samples.

Disposable and Low-Cost Electrode Based on Graphene Paper-Nafion-Bi Nanostructures for Ultra-Trace Determination of Pb(II) and Cd(II)

There is a huge demand for rapid, reliable and low-cost methods for the analysis of heavy metals in drinking water, particularly in the range of sub-part per billion (ppb). In the present work, we describe the preparation, characterization and analytical performance of the disposable sensor to be employed in Square Wave Anodic Stripping Voltammetry (SWASV) for ultra-trace simultaneous determination of cadmium and lead. The electrode consists of graphene paper-perfluorosulfonic ionomer-bismuth nano-composite material. The electrode preparation implies a key step aimed to enhance the Bi3+ adsorption into nafion film, prior to the bismuth electro-deposition. Finely dispersed bismuth nanoparticles embedded in the ionomer film are obtained. The electrode was characterized by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX), Atomic Force Microscopy (AFM), X-ray Photoelectron Spectroscopy (XPS) and Electrochemical Impedance Spectroscopy (EIS). The electrode shows a linear response in the 5-100 ppb range, a time-stability tested up to almost three months, and detection limits up to 0.1 ppb for both Pb2+ and Cd2+. The electrode preparation method is simple and low in cost and the obtained analytical performance is very competitive with the state of art for the SWASV determination of Pb2+ and Cd2+ in solution.