Carbon Capture Materials in Post-Combustion: Adsorption and Absorption-Based Processes

Global warming and climate changes are among the biggest modern-day environmental problems, the main factor causing these problems is the greenhouse gas effect. The increased concentration of carbon dioxide in the atmosphere resulted in capturing increased amounts of reflected sunlight, causing serious acute and chronic environmental problems. The concentration of carbon dioxide in the atmosphere reached 421 ppm in 2022 as compared to 280 in the 1800s, this increase is attributed to the increased carbon dioxide emissions from the industrial revolution. The release of carbon dioxide into the atmosphere can be minimized by practicing carbon capture utilization and storage methods. Carbon capture utilization and storage (CCUS) has four major methods, namely, pre-combustion, post-combustion, oxyfuel combustion, and direct air capture. It has been reported that applying CCUS can capture up to 95% of the produced carbon dioxide in running power plants. However, a reported cost penalty and efficiency decrease hinder the wide applicability of CCUS. Advancements in the CCSU were made in increasing the efficiency and decreasing the cost of the sorbents. In this review, we highlight the recent developments in utilizing both physical and chemical sorbents to capture carbon. This includes amine-based sorbents, blended absorbents, ionic liquids, metal-organic framework (MOF) adsorbents, zeolites, mesoporous silica materials, alkali-metal adsorbents, carbonaceous materials, and metal oxide/metal oxide-based materials. In addition, a comparison between recently proposed kinetic and thermodynamic models was also introduced. It was concluded from the published studies that amine-based sorbents are considered assuperior carbon-capturing materials, which is attributed to their high stability, multifunctionality, rapid capture, and ability to achieve large sorption capacities. However, more work must be done to reduce their cost as it can be regarded as their main drawback.

Nanomaterials as a sustainable choice for treating wastewater

Wastewater containing toxic substances is a major threat to the health of both aquatic and terrestrial ecosystems. In order to treat wastewater, nanomaterials are currently being studied intensively due to their unprecedented properties. The unique features of nanoparticles are prompting an increasing number of studies into their use in wastewater treatment. Although several studies have been undertaken in recent years, most of them did not focus on some of the nanomaterials that are now often utilized for wastewater treatment. It is essential to investigate the most recent advances in all the types of nanomaterials that are now frequently employed for wastewater treatment. The recent advancements in common nanomaterials used for sustainable wastewater treatment is comprehensively reviewed in this paper. This paper also thoroughly assesses unique features, proper utilization, future prospects, and current limitations of green nanotechnology in wastewater treatment. Zero-valent metal and metal oxide nanoparticles, especially iron oxides were shown to be more effective than traditional carbon nanotubes (CNTs) for recovering heavy metals in wastewater. Iron oxide achieved 75.9% COD (chemical oxygen demand) removal efficiency while titanium oxide (TiO₂) achieved 75.5% COD. Iron nanoparticles attained 72.1% methyl blue removal efficiency. However, since only a few types of nanomaterials have been commercialized, it is important to also focus on the economic feasibility of each nanomaterial. This study found that the large surface area, high reactivity, and strong mechanical properties of nanoparticles means they can be considered as a promising option for successful wastewater treatment.

Recent advances of carbon-based nanomaterials (CBNMs) for wastewater treatment: Synthesis and application

Carbon-based nanomaterials (CBNMs) have attracted significant alert due to the affluent science underpinning their implementations associated with a novel mixture of high aspect proportions, greater thermal and electrical performance, outstanding optical features, and high exterior area. CBNMs not only bear assurance in a broad range of implementations in medication, nano and microelectronics, and ecological remedies but may also be utilized in practical laboratory determinations. More specifically, CBNMs perform as an outstanding adsorbent in terminating heavy metal ions (HMI) from wastewater. There is presently a deficiency of powerful threat inspection instruments owing to their complex detection and related deficit in the health risk database. Therefore, our present review concentrates on spreading CBNMs to release pollutants from wastewater. The article wraps the effect of these contaminants and photocatalytic strategies towards treating these mixtures in wastewater, along with their restrictions and challenges, convincing resolutions, and possibilities of these approaches.

Eco-Friendly Reduced Graphene Oxide Nanofilter Preparation and Application for Iron Removal

In this paper, the green synthesis of reduced graphene oxide (r-GO) nanomaterials using Callistemon viminalis leaf extract as a reducing and stabilizing agent is reported for the first time. The synthesized r-GO nanomaterials were characterized using UV–Vis, XRD, FE-SEM, TEM, and energy dispersive X-ray (EDX) analyses. The nanofilter membrane was prepared by varying the amounts of r-GO nanomaterials in a Polysulfone-N,N-dimethyl formamide (DMF) solution. The nanofilter membrane was characterized by the contact angle, atomic force microscopy (AFM), UV–Vis, and FTIR. The results confirm the formation of r-GO nanomaterials. Higher amounts of r-GO nanomaterials in the membrane show a lower contact angle, thus confirming their hydrophilic nature. Iron water filtration was performed with different amounts of r-GO nanomaterials in the membrane filter, and the water flux was smooth over an increased time period. Inductively Coupled Plasma (ICP) analysis showed a higher percentage of iron rejection (95.77%) when higher amounts (0.10 g) of r-GO nanomaterials were used in a mixed membrane (i.e., sample C). In conclusion, the findings illustrate that Callistemon viminalis mediates the synthesis of r-GO nanomaterials, which is useful in water filtration, and can be incorporated into membrane filters, since it removes iron.

Nanotechnology in Wastewater Management: A New Paradigm Towards Wastewater Treatment

Clean and safe water is a fundamental human need for multi-faceted development of society and a thriving economy. Brisk rises in populations, expanding industrialization, urbanization and extensive agriculture practices have resulted in the generation of wastewater which have not only made the water dirty or polluted, but also deadly. Millions of people die every year due to diseases communicated through consumption of water contaminated by deleterious pathogens. Although various methods for wastewater treatment have been explored in the last few decades but their use is restrained by many limitations including use of chemicals, formation of disinfection by-products (DBPs), time consumption and expensiveness. Nanotechnology, manipulation of matter at a molecular or an atomic level to craft new structures, devices and systems having superior electronic, optical, magnetic, conductive and mechanical properties, is emerging as a promising technology, which has demonstrated remarkable feats in various fields including wastewater treatment. Nanomaterials encompass a high surface to volume ratio, a high sensitivity and reactivity, a high adsorption capacity, and ease of functionalization which makes them suitable for application in wastewater treatment. In this article we have reviewed the techniques being developed for wastewater treatment using nanotechnology based on adsorption and biosorption, nanofiltration, photocatalysis, disinfection and sensing technology. Furthermore, this review also highlights the fate of the nanomaterials in wastewater treatment as well as risks associated with their use.

A Review on Heavy Metal Ions and Containing Dyes Removal Through Graphene Oxide-Based Adsorption Strategies for Textile Wastewater Treatment

Textile wastewater heavy metal pollution has become a severe environmental problem worldwide. Metal ion inclusion in a dye molecule exhibits a bathochromic shift producing deeper but duller shades, which provides excellent colouration. The ejection of a massive volume of wastewater containing heavy metal ions such as Cr (VI), Pb (II), Cd (II) and Zn (II) and metal-containing dyes are an unavoidable consequence because the textile industry consumes large quantities of water and all these chemicals cannot be combined entirely with fibres during the dyeing process. These high concentrations of chemicals in effluents interfere with the natural water resources, cause severe toxicological implications on the environment with a dramatic impact on human health. This article reviewed the various metal-containing dye types and their heavy metal ions pollution from entryway to the wastewater, which then briefly explored the effects on human health and the environment. Graphene-based absorbers, specially graphene oxide (GO) benefits from an ordered structured, high specific surface area, and flexible surface functionalization options, which are indispensable to realize a high performance of heavy metal ion removal. These exceptional adsorption properties of graphene-based materials support a position of ubiquity in our everyday lives. The collective representation of the textile wastewater's effective remediation methods is discussed and focused on the GO-based adsorption methods. Understanding the critical impact regarding the GO-based materials established adsorption portfolio for heavy metal ions removal are also discussed. Various heavy-metal ions and their pollutant effect, ways to remove such heavy metal ions and role of graphene-based adsorbent including their demand, perspective, limitation, and relative scopes are discussed elaborately in the review.

Current Advances of Polymer Composites for Water Treatment and Desalination

Over the past five years, a lot of research activities in polymer composites were done in order to improve environmental sustainability and to present advantages for commercial applications of water treatment and desalination. Polymers offered tunable properties, improved processability, remarkable stability, high surface area for fast decontamination, selectivity to eliminate different pollutants, and cost-cutting of water treatment. Hence, the development of polymeric materials is one of the future directions to meet the environmental water standards and to supply the water requirements of the growing populations. This review highlighted the very recent achievements in fabrication, characterization, and applications of polymeric composites used for water treatment and desalination. The polymeric modifications, the addition of functional groups, and the assemblies of nanomaterials were also discussed in detail. In particular, great attention was paid to the recent advances in polymer/polymer composites, polymer/carbon composites, and polymer/clay composites, presenting their usage in the removal of various types of contaminants, e.g., metal ions, dyes, and other toxic pollutants. The review also summarized the main advantages and disadvantages of the different adsorbent materials. Specific attention was paid to the mechanism of adsorption, including chemisorption and physisorption mechanisms. In addition, the challenges and the future perspectives were identified to reach the optimal performance of the different adsorbents.