An Injectable Fibrin Scaffold Rich in Growth Factors for Skin Repair

Enhancing cutaneous wound healing: A study on the beneficial effects of nano-gelatin scaffold in rat models

The challenges in achieving optimal outcomes for wound healing have persisted for decades, prompting ongoing exploration of interventions and management strategies. This study focuses on assessing the potential benefits of implementing a nano-gelatin scaffold for wound healing. Using a rat skin defect model, full-thickness incisional wounds were created on each side of the thoracic-lumbar regions after anesthesia. The wounds were left un-sutured, with one side covered by a gelatin nano-fibrous membrane and the other left uncovered. Wound size changes were measured on days 1, 4, 7, and 14, and on day 14, rats were sacrificed for tissue sample excision, examined with hematoxylin and eosin, and Masson's trichrome stain. Statistical comparisons were performed. The gelatin nanofibers exhibited a smooth surface with a fiber diameter of 260 ± 40 nm and porous structures with proper interconnectivity. Throughout the 14-day experimental period, significant differences in the percentage of wound closure were observed between the groups. Histological scores were higher in the experiment group, indicating less inflammation but dense and well-aligned collagen fiber formation. A preliminary clinical trial on diabetic ulcers also demonstrated promising results. This study highlights the potential of the nano-collagen fibrous membrane to reduce inflammatory infiltration and enhance fibroblast differentiation into myofibroblasts during the early stages of cutaneous wound healing. The nano-fibrous collagen membrane emerges as a promising candidate for promoting wound healing, with considerable potential for future therapeutic applications.

Potential antibacterial activity and healing effect of topical administration of bone marrow and adipose mesenchymal stem cells encapsulated in collagen-fibrin hydrogel scaffold on full-thickness burn wound infection caused by Pseudomonas aeruginosa

Burns injuries are prone to hospital-acquired infections, and Pseudomonas aeruginosa is one of the most common causes of mortality and morbidity in patients with burn injuries. Thus, this study aimed to analyze the effects of topical treatment with bone marrow (BM-MSC) and adipose mesenchymal stem cells (AD-MSC) encapsulated in collagen and fibrin scaffolds in a Balb/c model of burn wound infection. Extraction of stem cells from adipose and bone marrow tissue of rats was performed and cells were characterized using standard methods. Then, collagen, fibrin and collagen-fibrin scaffolds were constructed and the extracted cells were encapsulated in all three scaffolds. Then, 3rd degree burn was induced in mice and 1.5 × 108 (CFU/ml) of P. aeruginosa was introduced to the burn wound. Subsequently, after 24 h of inducing wound infection, encapsulated MSCs were introduced as dressings to burn wound infection and microbial load as well as rate of wound infection healing was measured. The results of this study showed that the use of BM-MSC and AD-MSC encapsulated in collagen-fibrin scaffold reduced the bacteria load down to 54 and 21 CFU/gr, respectively (P < 0.05). Moreover, BM-MSC and AD-MSC encapsulated in collagen-fibrin showed 80% and 75% wound healing, respectively (P < 0.05). Also, we found no significant between cell origin and healing. Encapsulation of MSCs into collagen-fibrin scaffolds could be effective not only against P. aeruginosa infection, but also healing and regeneration of burn wound.

Polymeric biomaterials for wound healing

Skin indicates a person's state of health and is so important that it influences a person's emotional and psychological behavior. In this context, the effective treatment of wounds is a major concern, since several conventional wound healing materials have not been able to provide adequate healing, often leading to scar formation. Hence, the development of innovative biomaterials for wound healing is essential. Natural and synthetic polymers are used extensively for wound dressings and scaffold production. Both natural and synthetic polymers have beneficial properties and limitations, so they are often used in combination to overcome overcome their individual limitations. The use of different polymers in the production of biomaterials has proven to be a promising alternative for the treatment of wounds, as their capacity to accelerate the healing process has been demonstrated in many studies. Thus, this work focuses on describing several currently commercially available solutions used for the management of skin wounds, such as polymeric biomaterials for skin substitutes. New directions, strategies, and innovative technologies for the design of polymeric biomaterials are also addressed, providing solutions for deep burns, personalized care and faster healing.

Fibrin and Marine-Derived Agaroses for the Generation of Human Bioartificial Tissues: An Ex Vivo and In Vivo Study

Development of an ideal biomaterial for clinical use is one of the main objectives of current research in tissue engineering. Marine-origin polysaccharides, in particular agaroses, have been widely explored as scaffolds for tissue engineering. We previously developed a biomaterial based on a combination of agarose with fibrin, that was successfully translated to clinical practice. However, in search of novel biomaterials with improved physical and biological properties, we have now generated new fibrin-agarose (FA) biomaterials using 5 different types of agaroses at 4 different concentrations. First, we evaluated the cytotoxic effects and the biomechanical properties of these biomaterials. Then, each bioartificial tissue was grafted in vivo and histological, histochemical and immunohistochemical analyses were performed after 30 days. Ex vivo evaluation showed high biocompatibility and differences in their biomechanical properties. In vivo, FA tissues were biocompatible at the systemic and local levels, and histological analyses showed that biointegration was associated to a pro-regenerative process with M2-type CD206-positive macrophages. These results confirm the biocompatibility of FA biomaterials and support their clinical use for the generation of human tissues by tissue engineering, with the possibility of selecting specific agarose types and concentrations for applications requiring precise biomechanical properties and in vivo reabsorption times.

Skin and Bone Regeneration of Solid Bone Marrow Aspirate Concentrate Versus Platelet-Rich Fibrin

Solid bone marrow aspirate concentrate (sBMAC) is harvested from bone marrow aspirate without anticoagulants by a centrifugation protocol similar to that for platelet-rich fibrin (PRF) prepared from peripheral blood. It was hypothesized that sBMAC could accelerate not only wound healing but also bone regeneration because of the abundant growth factor (GF) releases from enriched bone marrow cells. The purpose of the present study was to investigate skin wound healing and bone regenerative potential of sBMAC compared with arterial blood-derived PRF (Ar-PRF) and venous blood-derived PRF (Ve-PRF) in a skin defect and calvarial bone defect model in rabbits. GF release assays revealed significantly higher release of transforming growth factor-β (TGF-β), alkaline phosphatase (ALP), and osteocalcin (OCN) from sBMAC compared with PRFs for 24 h. In the skin defect animal model, sBMAC and PRFs promoted wound bed angiogenesis and re-epithelization in skin defect sites with higher collagen 1 synthesis, cytokeratin AE1/AE3, vascular endothelial growth factor (VEGF) expressions on week 1. Furthermore, a calvarial defect assay revealed that sBMAC promoted new bone formation with a sufficient bone marrow structure similar to that of intact bone in the bone defects. Ar-PRF achieved the second highest bone closure and new bone volume but yielded new bone that was thinner than the intact bone. In conclusion, sBMAC treatment might be a good option instead of PRF as an adjuvant therapy for both skin and bone tissue regeneration therapies in certain clinical situations. Impact statement Solid bone marrow aspirate concentrate (sBMAC) is new type of clot material prepared from bone marrow aspirate. The present study for the first time showed that sBMAC significantly accelerated both skin wound healing and bone formation in the defects, compared with conventional platelet-rich fibrin in rabbit experiment models.

The effect of submucosal injection of platelet-rich fibrin vs. platelet-rich plasma on orthodontic tooth movement in rabbits; 28 days follow-up

OBJECTIVE

This study aimed to compare between the effects of submucosal injection of platelet rich fibrin (i-PRF) versus platelet rich plasma (PRP) on orthodontic tooth movement (OTM) in a rabbit model over a 28-day follow-up period.

MATERIALS AND METHODS

Sixty-three rabbits were assigned into 3 equal groups. Group I animals were subjected to the OTM without any treatments and considered as the control. Whereas groups II and III were handled as group I and instead i-PRF and PRP were injected submucosally in the buccal vestibular mucosa next to the mandibular 1st premolar, respectively. The distance of OTM was consecutively measured clinically after 7, 14 and 28 days. Seven rabbits from each group were euthanized after 7, 14 and 28 days for histological evaluation. Two-way ANOVA followed by LSD post-hoc statistical tests were used for comparison.

RESULTS

After 28 days, the mean tooth movements were 4.36±0.04mm in the control group, 6.30±0.06mm in the group receiving PRP and, 6.85±0.09mm in the group receiving i-PRF. Statistical analysis for the values of teeth movements revealed highly significant differences between different groups (P=0.001) and between different time periods (P=0.001). Histological analysis showed that submucosal injection of PRP and i-PRF yielded significant differences in periodontal ligament width in compression and tension sides between different groups (P=0.001) and between different time periods (P=0.001).

CONCLUSION

Submucosal injection of either PRP or i-PRF is a minimally invasive and safe approach for accelerating OTM. In this rabbit model, the effect of i-PRF is significantly more pronounced than the effect of PRP.

Evolution and Clinical Advances of Platelet-Rich Fibrin in Musculoskeletal Regeneration

Over the past few decades, various forms of platelet concentrates have evolved with significant clinical utility. The newer generation products, including leukocyte-platelet-rich fibrin (L-PRF) and advanced platelet-rich fibrin (A-PRF), have shown superior biological properties in musculoskeletal regeneration than the first-generation concentrates, such as platelet-rich plasma (PRP) and plasma rich in growth factors. These newer platelet concentrates have a complete matrix of physiological fibrin that acts as a scaffold with a three-dimensional (3D) architecture. Further, it facilitates intercellular signaling and migration, thereby promoting angiogenic, chondrogenic, and osteogenic activities. A-PRF with higher leukocyte inclusion possesses antimicrobial activity than the first generations. Due to the presence of enormous amounts of growth factors and anti-inflammatory cytokines that are released, A-PRF has the potential to replicate the various physiological and immunological factors of wound healing. In addition, there are more neutrophils, monocytes, and macrophages, all of which secrete essential chemotactic molecules. As a result, both L-PRF and A-PRF are used in the management of musculoskeletal conditions, such as chondral injuries, tendinopathies, tissue regeneration, and other sports-related injuries. In addition to this, its applications have been expanded to include the fields of reconstructive cosmetic surgery, wound healing in diabetic patients, and maxillofacial surgeries.

Autologous Bioactive Compound Concentrated Growth Factor Ameliorates Fistula Healing of Anal Fistula in a Pig Model and Promotes Proliferation and Migration of Human Skin Fibroblasts via Regulating the MEK/ERK Pathway

Recent evidence suggested that autologous concentrated growth factor (CGF), a new bioactive compound from autologous blood is used widely as an ingenious biomaterial in tissue regeneration with anti-inflammatory properties. This study investigated whether CGF could be involved in the treatment of fistula healing in the anal fistula. For this purpose, the porcine anal fistula model was conducted using the rubber band ligation method and collected pig autogenic CGF to treat the fistulas. CGF treatment promoted fistula healing, which was reflected in the downregulation of inflammatory factors, upregulation of growth factors, and promoted epithelial-mesenchymal transition with increased collagen synthesis. Besides, 16S rRNA gene sequencing analysis of fistula tissues between the control and CGF groups showed that the microbial populations exhibiting significant differences were VadinCA02, Blastomonas, Deinococcus, Devosia, Sphingomonas, Rubrobacteria, and GW_34. CGF of volunteers were collected to process small interfering RNA- (siRNA-) ERK or siRNA-negative control transfected human skin fibroblasts (HSF). The results showed that CGF also promoted the proliferation and extracellular matrix-related functions in HSF, as well as activated the MEK/ERK pathway in vitro and in vivo. Finally, knockdown ERK reversed the effects of CGF in promoting wound healing in HSF. Collectively, our results suggest that the CGF as the bioactive compound from autologous blood exhibited great potential for repairing fistulas as well as promoting the proliferation and migration of human skin fibroblasts by triggering MEK/ERK signaling. These findings provided a fresh perspective for understanding the role of CGF in the management of fistulas.

Bone Cell Exosomes and Emerging Strategies in Bone Engineering

Bone tissue remodeling is a highly regulated process balancing bone formation and resorption through complex cellular crosstalk between resident bone and microenvironment cells. This cellular communication is mediated by direct cell and cell–matrix contact, autocrine, endocrine, and paracrine receptor mediated mechanisms such as local soluble signaling molecules and extracellular vesicles including nanometer sized exosomes. An impairment in this balanced process leads to development of pathological conditions. Bone tissue engineering is an emerging interdisciplinary field with potential to address bone defects and disorders by synthesizing three-dimensional bone substitutes embedded with cells for clinical implantation. However, current cell-based therapeutic approaches have faced hurdles due to safety and ethical concerns, challenging their clinical translation. Recent studies on exosome-regulated bone homeostasis and regeneration have gained interest as prospective cell free therapy in conjugation with tissue engineered bone grafts. However, exosome research is still in its nascent stages of bone tissue engineering. In this review, we specifically describe the role of exosomes secreted by cells within bone microenvironment such as osteoblasts, osteocytes, osteoclasts, mesenchymal stem cell cells, immune cells, endothelial cells, and even tumor cells during bone homeostasis and crosstalk. We also review exosome-based osteoinductive functionalization strategies for various bone-based biomaterials such as ceramics, polymers, and metals in bone tissue engineering. We further highlight biomaterials as carrier agents for exosome delivery to bone defect sites and, finally, the influence of various biomaterials in modulation of cell exosome secretome.

Application of Tilapia Skin Acellular Dermal Matrix to Induce Acute Skin Wound Repair in Rats

Extracellular matrix (ECM) material with good biological activity is essential to simulate cell growth microenvironment, induce cell infiltration and angiogenesis, and promote the repair of large area acute skin wound. In this study, tilapia skin acellular dermal matrix (TADM) was prepared to simulate ECM microenvironment, which can promote substantial area acute wound healing in rats. The main component of TADM is type I collagen, which has good physical and chemical properties, biological activity and cell adhesion. TADM is a form of biomaterial with low immunogenicity, low risk of prion infection and lower economic cost than other related materials such as mammalian collagen biomaterials. Our results show that TADM can guide cell infiltration, angiogenesis, regulate the expression and secretion of inflammatory and skin repair correlated factors to promote tissue healing.

Stem Cell-Based Tissue Engineering for the Treatment of Burn Wounds: A Systematic Review of Preclinical Studies

Burn wounds are a devastating type of skin injury leading to severe impacts on both patients and the healthcare system. Current treatment methods are far from ideal, driving the need for tissue engineered solutions. Among various approaches, stem cell-based strategies are promising candidates for improving the treatment of burn wounds. A thorough search of the Embase, Medline, Scopus, and Web of Science databases was conducted to retrieve original research studies on stem cell-based tissue engineering treatments tested in preclinical models of burn wounds, published between January 2009 and June 2021. Of the 347 articles retrieved from the initial database search, 33 were eligible for inclusion in this review. The majority of studies used murine models with a xenogeneic graft, while a few used the porcine model. Thermal burn was the most commonly induced injury type, followed by surgical wound, and less commonly radiation burn. Most studies applied stem cell treatment immediately post-burn, with final endpoints ranging from 7 to 90 days. Mesenchymal stromal cells (MSCs) were the most common stem cell type used in the included studies. Stem cells from a variety of sources were used, most commonly from adipose tissue, bone marrow or umbilical cord, in conjunction with an extensive range of biomaterial scaffolds to treat the skin wounds. Overall, the studies showed favourable results of skin wound repair in animal models when stem cell-based tissue engineering treatments were applied, suggesting that such strategies hold promise as an improved therapy for burn wounds.

Second generation liquid platelet concentrates: A literature review

Liquid or injectable platelet rich fibrin (PRF) is a second-generation platelet concentrate which is completely autologous and free of external additives like bovine thrombin and calcium chloride. Additionally, it is the only one to be obtained in a liquid form among the second generation platelet concentrates. This allows for wide applications such as to maximize injections or mixing with biomaterials such as bone grafts or antibiotics. Since it was first introduced in 2015, several modifications of the original protocol have been proposed which aim at maximizing its biological and mechanical properties. This includes changes in centrifugation speed, time, and so on. The aim of this review is to summarize the various modifications of the injectable/liquid formation of PRF as well as to discuss the potential applications and future research direction.