Fibrin Gel-Immobilized Primary Osteoblasts in Calcium Phosphate Bone Cement: In vivo Evaluation with Regard to Application as Injectable Biological Bone Substitute

Effects of artemisinin sustained-release algaecides on in-situ cyanobacterial inhibition and microbes-floating plants dominated ecosystem functions in artificial landscape lake

The artemisinin sustained-release algaecides (ASAs) have been proven to be a safe and effective mean of inhibiting cyanobacteria in laboratory experiments. However, their effectiveness and impacts on ecosystem functions (EF) in natural waters are still unclear. In this study, the in-situ inhibitory effect of ASAs on cyanobacteria in natural waters was investigated over a period of 110 days to assess EF impacts dominated by microbes and floating plants. The results indicated that ASAs had a long-term inhibitory effect on cyanobacteria. ASAs did not affect sediment but increased TOC and TP in the water column in 2-10 days. Microbial diversity and network analyses indicated that ASAs enhanced bacterial diversity, network complexity, and hub-bacteria in networks. Metabolic pathway predictions and CCA analysis showed that ASAs maintained the stability of EF by enhancing the metabolic capacities of bacteria, and the relationships between metabolic microorganisms and environmental factors. PLS-PM revealed that ASAs primarily drove bacterial resistance to cyanobacteria, which was the key mechanism for its long-term inhibition of cyanobacteria. However, the early outbreak of floating plants was not conducive to the long-term inhibition of cyanobacteria by ASAs. This study provides new insights into the mechanisms and ecological impacts of cyanobacterial inhibition by ASAs in complex aquatic environments.

Electrospun poly(l-lactide-co-dl-lactide) nanofibrous scaffold as substrate for ex vivo limbal epithelial cell cultivation

Ultrathin electrospun poly (l-lactide-co-dl-lactide) nanofibrous membranes coated with fibronectin were explored as scaffolds for the ex vivo cultivation of limbal epithelial cells (LECs) for the treatment of limbal stem cell deficiency. The developed scaffolds were compared with the "gold-standard" fibrin gel. The resulting membranes composed of nanofibers possessed a very low thickness of 4 μm and allowed very good optical transparency in the wet state. The fibronectin-coated nanofibrous scaffolds demonstrated LEC expansion and successful cultivation similar to that on fibrin gel. Unlike the regular cobblestone epithelial cell morphology on the fibrin gel, the nanofibrous scaffold presented a mostly irregular epithelial morphology with a shift to a mesenchymal phenotype, as confirmed by the upregulation of profibroblastic genes: ACTA2 (p = 0.023), FBLN1 (p < 0.001), and THY1 (p < 0.001). Both culture conditions revealed comparable expression of stem cell markers, including KLF4, ΔNp63α and ABCG2, emphasizing the promise of polylactide-based nanofibrous membranes for further investigations.

Contractile and Genetic Characterization of Cardiac Constructs Engineered from Human Induced Pluripotent Stem Cells: Modeling of Tuberous Sclerosis Complex and the Effects of Rapamycin

The implementation of three-dimensional tissue engineering concurrently with stem cell technology holds great promise for in vitro research in pharmacology and toxicology and modeling cardiac diseases, particularly for rare genetic and pediatric diseases for which animal models, immortal cell lines, and biopsy samples are unavailable. It also allows for a rapid assessment of phenotype-genotype relationships and tissue response to pharmacological manipulation. Mutations in the TSC1 and TSC2 genes lead to dysfunctional mTOR signaling and cause tuberous sclerosis complex (TSC), a genetic disorder that affects multiple organ systems, principally the brain, heart, skin, and kidneys. Here we differentiated healthy (CC3) and tuberous sclerosis (TSP8-15) human induced pluripotent stem cells (hiPSCs) into cardiomyocytes to create engineered cardiac tissue constructs (ECTCs). We investigated and compared their mechano-elastic properties and gene expression and assessed the effects of rapamycin, a potent inhibitor of the mechanistic target of rapamycin (mTOR). The TSP8-15 ECTCs had increased chronotropy compared to healthy ECTCs. Rapamycin induced positive inotropic and chronotropic effects (i.e., increased contractility and beating frequency, respectively) in the CC3 ECTCs but did not cause significant changes in the TSP8-15 ECTCs. A differential gene expression analysis revealed 926 up- and 439 down-regulated genes in the TSP8-15 ECTCs compared to their healthy counterparts. The application of rapamycin initiated the differential expression of 101 and 31 genes in the CC3 and TSP8-15 ECTCs, respectively. A gene ontology analysis showed that in the CC3 ECTCs, the positive inotropic and chronotropic effects of rapamycin correlated with positively regulated biological processes, which were primarily related to the metabolism of lipids and fatty and amino acids, and with negatively regulated processes, which were predominantly associated with cell proliferation and muscle and tissue development. In conclusion, this study describes for the first time an in vitro TSC cardiac tissue model, illustrates the response of normal and TSC ECTCs to rapamycin, and provides new insights into the mechanisms of TSC.

Preclinical Testing Techniques: Paving the Way for New Oncology Screening Approaches

Prior to clinical trials, preclinical testing of oncology drug candidates is performed by evaluating drug candidates with in vitro and in vivo platforms. For in vivo testing, animal models are used to evaluate the toxicity and efficacy of drug candidates. However, animal models often display poor translational results as many drugs that pass preclinical testing fail when tested with humans, with oncology drugs exhibiting especially poor acceptance rates. The FDA Modernization Act 2.0 promotes alternative preclinical testing techniques, presenting the opportunity to use higher complexity in vitro models as an alternative to in vivo testing, including three-dimensional (3D) cell culture models. Three-dimensional tissue cultures address many of the shortcomings of 2D cultures by more closely replicating the tumour microenvironment through a combination of physiologically relevant drug diffusion, paracrine signalling, cellular phenotype, and vascularization that can better mimic native human tissue. This review will discuss the common forms of 3D cell culture, including cell spheroids, organoids, organs-on-a-chip, and 3D bioprinted tissues. Their advantages and limitations will be presented, aiming to discuss the use of these 3D models to accurately represent human tissue and as an alternative to animal testing. The use of 3D culture platforms for preclinical drug development is expected to accelerate as these platforms continue to improve in complexity, reliability, and translational predictivity.

Protein scaffolds in human clinics

Fundamental clinical areas such as drug delivery and regenerative medicine require biocompatible materials as mechanically stable scaffolds or as nanoscale drug carriers. Among the wide set of emerging biomaterials, polypeptides offer enticing properties over alternative polymers, including full biocompatibility, biodegradability, precise interactivity, structural stability and conformational and functional versatility, all of them tunable by conventional protein engineering. However, proteins from non-human sources elicit immunotoxicities that might bottleneck further development and narrow their clinical applicability. In this context, selecting human proteins or developing humanized protein versions as building blocks is a strict demand to design non-immunogenic protein materials. We review here the expanding catalogue of human or humanized proteins tailored to execute different levels of scaffolding functions and how they can be engineered as self-assembling materials in form of oligomers, polymers or complex networks. In particular, we emphasize those that are under clinical development, revising their fields of applicability and how they have been adapted to offer, apart from mere mechanical support, highly refined functions and precise molecular interactions.

Bioprinted osteon-like scaffolds enhance in vivo neovascularization

Bone tissue engineers are facing a daunting challenge when attempting to fabricate bigger constructs intended for use in the treatment of large bone defects, which is the vascularization of the graft. Cell-based approaches and, in particular, the use of in vitro coculture of human umbilical vein endothelial cells (HUVECs) and human mesenchymal stem cells (hMSCs) has been one of the most explored options. We present in this paper an alternative method to mimic the spatial pattern of HUVECs and hMSCs found in native osteons based on the use of extrusion-based 3D bioprinting (3DP). We developed a 3DP biphasic osteon-like scaffold, containing two separate osteogenic and vasculogenic cell populations encapsulated in a fibrin bioink in order to improve neovascularization. To this end, we optimized the fibrin bioink to improve the resolution of printed strands and ensure a reproducible printing process; the influence of printing parameters on extruded strand diameter and cell survival was also investigated. The mechanical strength of the construct was improved by co-printing the fibrin bioink along a supporting PCL carrier scaffold. Compressive mechanical testing showed improved mechanical properties with an average compressive modulus of 131 ± 23 MPa, which falls in the range of cortical bone. HUVEC and hMSC laden fibrin hydrogels were printed in osteon-like patterns and cultured in vitro. A significant increase in gene expression of angiogenic markers was observed for the biomimetic scaffolds. Finally, biphasic scaffolds were implanted subcutaneously in rats. Histological analysis of explanted scaffolds showed a significant increase in the number of blood vessels per area in the 3D printed osteon-like scaffolds. The utilization of these scaffolds in constructing biomimetic osteons for bone regeneration demonstrated a promising capacity to improve neovascularization of the construct. These results indicates that proper cell orientation and scaffold design could play a critical role in neovascularization.

Building an Artificial Stem Cell Niche: Prerequisites for Future 3D-Formation of Inner Ear Structures-Toward 3D Inner Ear Biotechnology

In recent years, there has been an increased interest in stem cells for the purpose of regenerative medicine to deliver a wide range of therapies to treat many diseases. However, two‐dimensional cultures of stem cells are of limited use when studying the mechanism of pathogenesis of diseases and the feasibility of a treatment. Therefore, research is focusing on the strengths of stem cells in the three‐dimensional (3D) structures mimicking organs, that is, organoids, or organ‐on‐chip, for modeling human biology and disease. As 3D technology advances, it is necessary to know which signals stem cells need to multiply and differentiate into complex structures. This holds especially true for the complex 3D structure of the inner ear. Recent work suggests that although other factors play a role, the extracellular matrix (ECM), including its topography, is crucial to mimic a stem cell niche in vitro and to drive stem cells toward the formation of the tissue of interest. Technological developments have led to the investigation of biomaterials that closely resemble the native ECM. In the fast forward moving research of organoids and organs‐on‐chip, the inner ear has hardly received attention. This review aims to provide an overview, by describing the general context in which cells, matrix and morphogens cooperate in order to build a tissue, to facilitate research in 3D inner ear technology. Anat Rec, 303:408–426, 2020. © 2019 The Authors. The Anatomical Record published by Wiley Periodicals, Inc. on behalf of American Association of Anatomists.

Effects of Acellular Amniotic Membrane Matrix and Bone Marrow-Derived Mesenchymal Stem Cells in Improving Random Skin Flap Survival in Rats

BACKGROUND

The necrotic skin flap represents a great challenge in plastic and reconstructive surgery. In this study, we evaluated the effect of bioscaffolds, acellular amniotic membranes (AAMs), and bone marrow-derived mesenchymal stem cells (BM-MSCs) on random skin flap (RSF) survival in rats by applying a cell-free extracellular matrix scaffold as a supportive component for the growth and proliferation of BM-MSCs on RSFs. AAM matrix scaffolds were created by incubating AMs in ethylenediaminetetraacetic acid 0.05% at 37°C, and cell scrapers were used.

OBJECTIVES

The aim of the present study was to assess the effect of AAM as a scaffold in TE, and combined with transplanted BM-MSCs, on the survival of RSFs and on the biomechanical parameters of the incision-wound flap margins 7 days after flap elevation.

MATERIALS AND METHODS

BM-MSCs and AAMs were transplanted into subcutaneous tissue in the flap area. On the 7th postoperative day, the surviving flap areas were measured using digital imaging software, and the flap tissue was collected for evaluation. Forty rats were randomly divided into four groups of 10 each: group 1 received an AAM injection; group 2 underwent BM-MSC transplantation; group 3 received both AAM injection + BM-MSC transplantation; and group 4 was the control group, receiving only saline.

RESULTS

The survival area in the AAM/BM-MSC group was significantly higher than in the control group (18.49 ± 1.58 versus 7.51 ± 2.42, P < 0.05). The biomechanical assessment showed no significant differences between the experimental groups and the control group (P > 0.05), and there was no correlation with flap survival.

CONCLUSIONS

Our findings showed that the treatment of flaps with BM-MSC and AAM transplantations significantly promoted flap survival compared to a control group. The viability of the flap was improved by combining BM-MSCs with AAM matrix scaffolds.

Utilization of a genetically modified muscle flap for local BMP-2 production and its effects on bone healing: a histomorphometric and radiological study in a rat model

Aim of the study

We developed an experimental rat model to explore the possibility of enhancing the healing of critical-size bone defects. The aim of this study was to demonstrate the feasibility of this concept by achieving high local BMP-2 expression via a transduced muscle flap that would facilitate bony union while minimizing systemic sequelae.

Methods

The transduction potential of the adenoviral vector encoding for BMP-2 was tested in different cell lines in vitro. In vivo experiments consisted of harvesting a pedicled quadriceps femoris muscle flap with subsequent creation of a critical-size defect in the left femur in Sprague-Dawley rats. Next, the pedicled muscle flap was perfused with high titers of Ad.BMP-2 and Ad.GFP virus, respectively. Twelve animals were divided into three groups comparing the effects of Ad.BMP-2 transduction to Ad.GFP and placebo. Bone healing was monitored radiologically with subsequent histological analysis post-mortem.

Results

The feasibility of this concept was demonstrated by successful transduction in vitro and in vivo as evidenced by a marked increase of BMP-2 expression. The three examined groups only showed minor difference regarding bone regeneration; however, one complete bridging of the defect was observed in the Ad.BMP-2 group. No evidence of systemic viral contamination was noted.

Conclusions

A marked increase of local BMP-2 expression (without untoward systemic sequelae) was detected. However, bone healing was not found to be significantly enhanced, possibly due to the small sample size of the study.

Fibrin gel as an injectable biodegradable scaffold and cell carrier for tissue engineering

Due to the increasing needs for organ transplantation and a universal shortage of donated tissues, tissue engineering emerges as a useful approach to engineer functional tissues. Although different synthetic materials have been used to fabricate tissue engineering scaffolds, they have many limitations such as the biocompatibility concerns, the inability to support cell attachment, and undesirable degradation rate. Fibrin gel, a biopolymeric material, provides numerous advantages over synthetic materials in functioning as a tissue engineering scaffold and a cell carrier. Fibrin gel exhibits excellent biocompatibility, promotes cell attachment, and can degrade in a controllable manner. Additionally, fibrin gel mimics the natural blood-clotting process and self-assembles into a polymer network. The ability for fibrin to cure in situ has been exploited to develop injectable scaffolds for the repair of damaged cardiac and cartilage tissues. Additionally, fibrin gel has been utilized as a cell carrier to protect cells from the forces during the application and cell delivery processes while enhancing the cell viability and tissue regeneration. Here, we review the recent advancement in developing fibrin-based biomaterials for the development of injectable tissue engineering scaffold and cell carriers.

Microsurgical techniques used to construct the vascularized and neurotized tissue engineered bone

The lack of vascularization in the tissue engineered bone results in poor survival and ossification. Tissue engineered bone can be wrapped in the soft tissue flaps which are rich in blood supply to complete the vascularization in vivo by microsurgical technique, and the surface of the bone graft can be invaded with new vascular network. The intrinsic vascularization can be induced via a blood vessel or an arteriovenous loop located centrally in the bone graft by microsurgical technique. The peripheral nerve especially peptidergic nerve has effect on the bone regeneration. The peptidergic nerve can be used to construct the neurotized tissue engineered bone by implanting the nerve fiber into the center of bone graft. Thus, constructing a highly vascularized and neurotized tissue engineered bone according with the theory of biomimetics has become a useful method for repairing the large bone defect. Many researchers have used the microsurgical techniques to enhance the vascularization and neurotization of tissue engineered bone and to get a better osteogenesis effect. This review aims to summarize the microsurgical techniques mostly used to construct the vascularized and neurotized tissue engineered bone.

Vascularization of Nanohydroxyapatite/Collagen/Poly(L-lactic acid) Composites by Implanting Intramuscularly In Vivo

It still remains a major challenge to repair large bone defects in the orthopaedic surgery. In previous studies, a nanohydroxyapatite/collagen/poly(L-lactic acid) (nHAC/PLA) composite, similar to natural bone in both composition and structure, has been prepared. It could repair small sized bone defects, but they were restricted to repair a large defect due to the lack of oxygen and nutrition supply for cell survival without vascularization. The aim of the present study was to investigate whether nHAC/PLA composites could be vascularized in vivo. Composites were implanted intramuscularly in the groins of rabbits for 2, 6, or 10 weeks (n=5×3). After removing, the macroscopic results showed that there were lots of rich blood supply tissues embracing the composites, and the volumes of tissue were increasing as time goes on. In microscopic views, blood vessels and vascular sprouts could be observed, and microvessel density (MVD) of the composites trended to increase over time. It suggested that nHAC/PLA composites could be well vascularized by implanting in vivo. In the future, it would be possible to generate vascular pedicle bone substitutes with nHAC/PLA composites for grafting.

New perspectives in cell delivery systems for tissue regeneration: natural-derived injectable hydrogels

Natural polymers, because of their biocompatibility, availability, and physico-chemical properties have been the materials of choice for the fabrication of injectable hydrogels for regenerative medicine. In particular, they are appealing materials for delivery systems and provide sustained and controlled release of drugs, proteins, gene, cells, and other active biomolecules immobilized.In this work, the use of hydrogels obtained from natural source polymers as cell delivery systems is discussed. These materials were investigated for the repair of cartilage, bone, adipose tissue, intervertebral disc, neural, and cardiac tissue. Papers from the last ten years were considered, with a particular focus on the advances of the last five years. A critical discussion is centered on new perspectives and challenges in the regeneration of specific tissues, with the aim of highlighting the limits of current systems and possible future advancements.

Vascularized bone tissue engineering: approaches for potential improvement

Significant advances have been made in bone tissue engineering (TE) in the past decade. However, classical bone TE strategies have been hampered mainly due to the lack of vascularization within the engineered bone constructs, resulting in poor implant survival and integration. In an effort toward clinical success of engineered constructs, new TE concepts have arisen to develop bone substitutes that potentially mimic native bone tissue structure and function. Large tissue replacements have failed in the past due to the slow penetration of the host vasculature, leading to necrosis at the central region of the engineered tissues. For this reason, multiple microscale strategies have been developed to induce and incorporate vascular networks within engineered bone constructs before implantation in order to achieve successful integration with the host tissue. Previous attempts to engineer vascularized bone tissue only focused on the effect of a single component among the three main components of TE (scaffold, cells, or signaling cues) and have only achieved limited success. However, with efforts to improve the engineered bone tissue substitutes, bone TE approaches have become more complex by combining multiple strategies simultaneously. The driving force behind combining various TE strategies is to produce bone replacements that more closely recapitulate human physiology. Here, we review and discuss the limitations of current bone TE approaches and possible strategies to improve vascularization in bone tissue substitutes.

Polymeric additives to enhance the functional properties of calcium phosphate cements

The vast majority of materials used in bone tissue engineering and regenerative medicine are based on calcium phosphates due to their similarity with the mineral phase of natural bone. Among them, calcium phosphate cements, which are composed of a powder and a liquid that are mixed to obtain a moldable paste, are widely used. These calcium phosphate cement pastes can be injected using minimally invasive surgery and adapt to the shape of the defect, resulting in an entangled network of calcium phosphate crystals. Adding an organic phase to the calcium phosphate cement formulation is a very powerful strategy to enhance some of the properties of these materials. Adding some water-soluble biocompatible polymers in the calcium phosphate cement liquid or powder phase improves physicochemical and mechanical properties, such as injectability, cohesion, and toughness. Moreover, adding specific polymers can enhance the biological response and the resorption rate of the material. The goal of this study is to overview the most relevant advances in this field, focusing on the different types of polymers that have been used to enhance specific calcium phosphate cement properties.

Application of collagen-chitosan/fibrin glue asymmetric scaffolds in skin tissue engineering

To create a scaffold that is suitable for the construction of tissue-engineered skin, a novel asymmetric porous scaffold with different pore sizes on either side was prepared by combining a collagen-chitosan porous membrane with fibrin glue. Tissue-engineered skin was fabricated using this asymmetric scaffold, fibroblasts, and a human keratinocyte line (HaCaT). Epidermal cells could be seen growing easily and achieved confluence on the fibrin glue on the upper surface of the scaffold. Scanning electron microscopy showed typical shuttle-like fibroblasts adhering to the wall of the scaffold and fluorescence microscopy showed them growing in the dermal layer of the scaffold. The constructed composite skin substitute had a histological structure similar to that of normal skin tissue after three weeks of culture. The results of our study suggest that the asymmetric scaffold is a promising biologically functional material for skin tissue engineering, with prospects for clinical applications.

Osteogenic differentiation of human periosteal-derived cells in a three-dimensional collagen scaffold

This study examined the osteogenic differentiation of cultured human periosteal-derived cells grown in a three dimensional collagen-based scaffold. Periosteal explants with the appropriate dimensions were harvested from the mandible during surgical extraction of lower impacted third molar. Periosteal-derived cells were introduced into cell culture. After passage 3, the cells were divided into two groups and cultured for 28 days. In one group, the cells were cultured in two-dimensional culture dishes with osteogenic inductive medium containing dexamethasone, ascorbic acid, and β-glycerophosphate. In the other group, the cells were seeded onto a three-dimensional collagen scaffold and cultured under the same conditions. We examined the bioactivity of alkaline phosphatase (ALP), the RT-PCR analysis for ALP and osteocalcin, and measurements of the calcium content in the periosteal-derived cells of two groups. Periosteal-derived cells were successfully differentiated into osteoblasts in the collagen-based scaffold. The ALP activity in the periosteal-derived cells was appreciably higher in the three-dimensional collagen scaffolds than in the two-dimensional culture dishes. The levels of ALP and osteocalcin mRNA in the periosteal-derived cells was also higher in the three-dimensional collagen scaffolds than in the two-dimensional culture dishes. The calcium level in the periosteal-derived cells seeded onto three-dimensional collagen scaffolds showed a 5.92-fold increase on day 7, 3.28-fold increase on day 14, 4.15-fold increase on day 21, and 2.91-fold increase on day 28, respectively, compared with that observed in two-dimensional culture dishes. These results suggest that periosteal-derived cells have good osteogenic capacity in a three-dimensional collagen scaffold, which provides a suitable environment for the osteoblastic differentiation of these cells.

Plasma-fibroblast gel as scaffold for islet transplantation

The transplant of pancreatic islets into the liver can restore normal blood glucose levels in patients with type I diabetes. However, long-term results have indicated that the site and method of transplantation still need to be optimized to improve islet engraftment. This study was designed to assess the efficiency of the use of clotted blood plasma containing fibroblasts ("plasma-fibroblast gel") as a scaffold for subcutaneous islet transplantation in diabetic athymic mice. Islets embedded in the plasma-fibroblast gel were able to resolve hyperglycemia in transplanted mice, restoring normoglycemia over a 60-day period and allowing gradual body weight recovery. Glucose clearances were significantly improved when compared to those recorded in diabetic animals and similar to those observed in the control group (free islets transplanted beneath the kidney capsule). Histological evaluation revealed functional islets within a subcutaneous tissue rich in collagen fibers that was well vascularized, with blood vessels observed around and inside the islets. These findings suggest that this approach could be used as an alternative option for the treatment of type I diabetes in human clinical practice.

Fibrin gels and their clinical and bioengineering applications

Fibrin gels, prepared from fibrinogen and thrombin, the key proteins involved in blood clotting, were among the first biomaterials used to prevent bleeding and promote wound healing. The unique polymerization mechanism of fibrin, which allows control of gelation times and network architecture by variation in reaction conditions, allows formation of a wide array of soft substrates under physiological conditions. Fibrin gels have been extensively studied rheologically in part because their nonlinear elasticity, characterized by soft compliance at small strains and impressive stiffening to resist larger deformations, appears essential for their function as haemostatic plugs and as matrices for cell migration and wound healing. The filaments forming a fibrin network are among the softest in nature, allowing them to deform to large extents and stiffen but not break. The biochemical and mechanical properties of fibrin have recently been exploited in numerous studies that suggest its potential for applications in medicine and bioengineering.

Axial prevascularization of porous matrices using an arteriovenous loop promotes survival and differentiation of transplanted autologous osteoblasts

Generation of axially vascularized bioartificial bone might be performed using matrix neovascularization in connection with osteoblast injection. We sought to evaluate whether prevascularization of porous hard matrices using an arteriovenous (AV) loop promotes survival of transplanted osteoblasts. A processed bovine cancellous bone matrix was inserted into the AV loop. Six weeks later, 5 x 10(6) carboxyfluorescein diacetate-stained osteoblasts were injected into the matrix (group A, n = 34). Osteoblast-seeded matrices without prevascularization were implanted subcutaneously as controls (group B, n = 32). Specimens were subjected to histologic, morphometric, and molecular-biological analysis after 1, 4, 8, and 16 weeks. Upon cell injection, matrices were completely vascularized. An intense foreign body reaction was observed in matrices from both groups. Group A was significantly superior to group B in terms of osteoblast survival at any time point. Expression of bone-specific genes was detected in the AV loop group but not in the subcutaneous control. Bone formation was only detectable in 1 long-term animal of group A. This study demonstrates for the first time that axial prevascularization increases the survival of implanted osteoblasts in porous matrices. Matrices with optimized biocompatibility might eventually facilitate generation of axially vascularized bone tissue after injection of osteogenic cells in the AV loop model.

Intrinsic Axial Vascularization of an Osteoconductive Bone Matrix by Means of an Arteriovenous Vascular Bundle

BACKGROUND

The purpose of this study was to generate an autonomously vascularized hard-tissue construct suitable for microsurgical transfer. The effector of vascularization was an arteriovenous bundle inserted into a specially designed channel in the matrix. The authors also evaluated corrosion cast and intravital magnetic resonance angiography as methods for monitoring and quantifying the angiogenic response.

METHODS

Thirty inbred male Lewis rats were divided into two groups. In both groups (n = 15), a disk of processed bovine cancellous bone matrix was placed into an isolation chamber. In group A, a ligated arteriovenous bundle was inserted into the biogenic matrix as a vascular carrier. In group B, there was no vascular carrier. At 2, 4, and 8 weeks after implantation, four constructs per group were evaluated by means of histology and histomorphometry and one by scanning electron microscopy of vascular corrosion casts. Micro-magnetic resonance angiography was used for intravital evaluation of the vascularized matrices.

RESULTS

Vascular density was higher in group A. The capillary network in group A displayed a higher degree of maturation, with organization into vessels of different orders. Both the sprouting and intussusceptive modes of angiogenesis could be documented. Micro-magnetic resonance angiography showed a patency rate of approximately 75 percent in the bundle.

CONCLUSIONS

The authors zeroed in on the issue of vascularization. The results might provide a basis for further investigations on induction of bone formation in axially prevascularized matrices. Axially vascularized bone substitutes might solve issues of availability in mass and form and provide perfusion autonomy in sites of impaired circulation.

Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering

Ceramic composites and scaffolds are popular implant materials in the field of dentistry, orthopedics and plastic surgery. For bone tissue engineering especially CaP-ceramics or cements and bioactive glass are suitable implant materials due to their osteoconductive properties. In this review the applicability of these ceramics but also of ceramic/polymer composites for bone tissue engineering is discussed, and in particular their use as drug delivery systems. Overall, the high density and slow biodegradability of ceramics is not beneficial for tissue engineering purposes. To address these issues, macroporosity can be introduced often in combination with osteoinductive growth factors and cells. Ceramics are good carriers for drugs, in which release patterns are strongly dependent on the chemical consistency of the ceramic, type of drug and drug loading. Biodegradable polymers like polylactic acid, gelatin or chitosan are used as matrices for ceramic particles or as adjuvant to calcium phosphate cements. The use of these polymers can introduce a tailored biodegradation/drug release to the ceramic material.

Engineering of Vascularized Transplantable Bone Tissues: Induction of Axial Vascularization in an Osteoconductive Matrix Using an Arteriovenous Loop

INTRODUCTION

Vascularization remains an obstacle to engineering of larger volume bone tissues. Our aim was to induce axial vascularization in a processed bovine cancellous bone (PBCB) matrix using an arteriovenous (AV) loop (artery, vein graft, and vein).

METHODS

Custom-made PBCB discs (9 x 5 mm) were implanted into rats. In group A (n = 19), the matrices were inserted into microsurgically constructed AV loops between the femoral vessels using a vein graft from the contralateral side. In group B (n = 19), there was no vascular carrier. The matrices were encased in isolation chambers. After 2, 4, and 8 weeks, the animals were perfused with India ink via the abdominal aorta. Matrices were explanted and subjected to histological and morphometric analysis. Results were compared with intravital dynamic micro & magnetic resonance imaging and scanning electron microscopy images of vascular corrosion replicas.

RESULTS

In group A, significant vascularization of the matrix had occurred by the 8th week. At this time, vascular remodeling with organization into vessels of different sizes was evident. Blood vessels originated from all 3 zones of the AV loop. Group A was significantly superior to group B in terms of vascular density and vascularization kinetics.

DISCUSSION

This study demonstrates for the first time successful vascularization of solid porous matrices by means of an AV loop. Injection of osteogenic cells into axially prevascularized matrices may eventually create functional bioartificial bone tissues for reconstruction of large defects.

Tissue engineering of bone: the reconstructive surgeon's point of view

Bone defects represent a medical and socioeconomic challenge. Different types of biomaterials are applied for reconstructive indications and receive rising interest. However, autologous bone grafts are still considered as the gold standard for reconstruction of extended bone defects. The generation of bioartificial bone tissues may help to overcome the problems related to donor site morbidity and size limitations. Tissue engineering is, according to its historic definition, an "interdisciplinary field that applies the principles of engineering and the life sciences toward the development of biological substitutes that restore, maintain, or improve tissue function". It is based on the understanding of tissue formation and regeneration and aims to rather grow new functional tissues than to build new spare parts. While reconstruction of small to moderate sized bone defects using engineered bone tissues is technically feasible, and some of the currently developed concepts may represent alternatives to autologous bone grafts for certain clinical conditions, the reconstruction of large-volume defects remains challenging. Therefore vascularization concepts gain on interest and the combination of tissue engineering approaches with flap prefabrication techniques may eventually allow application of bone-tissue substitutes grown in vivo with the advantage of minimal donor site morbidity as compared to conventional vascularized bone grafts. The scope of this review is the introduction of basic principles and different components of engineered bioartificial bone tissues with a strong focus on clinical applications in reconstructive surgery. Concepts for the induction of axial vascularization in engineered bone tissues as well as potential clinical applications are discussed in detail.