Native extracellular matrix orientation determines multipotent vascular stem cell proliferation in response to cyclic uniaxial tensile strain and simulated stent indentation

Cardiovascular disease is the leading cause of death worldwide, with multipotent vascular stem cells (MVSC) implicated in contributing to diseased vessels. MVSC are mechanosensitive cells which align perpendicular to cyclic uniaxial tensile strain. Within the blood vessel wall, collagen fibers constrain cells so that they are forced to align circumferentially, in the primary direction of tensile strain. In these experiments, MVSC were seeded onto the medial layer of decellularized porcine carotid arteries, then exposed to 10%, 1 Hz cyclic tensile strain for 10 days with the collagen fiber direction either parallel or perpendicular to the direction of strain. Cells aligned with the direction of the collagen fibers regardless of the orientation to strain. Cells aligned with the direction of strain showed an increased number of proliferative Ki67 positive cells, while those strained perpendicular to the direction of cell alignment showed no change in cell proliferation. A bioreactor system was designed to simulate the indentation of a single, wire stent strut. After 10 days of cyclic loading to 10% strain, MVSC showed regions of densely packed, highly proliferative cells. Therefore, MVSC may play a significant role in in-stent restenosis, and this proliferative response could potentially be controlled by controlling MVSC orientation relative to applied strain.

•

ECM constrained MVSC align with collagen fibers when cells are strained parallel to collagen.

•

Straining MVSC aligned parallel to the direction of strain increased cell proliferation.

•

Simulated stent strut indentation showed increased cell density surrounding the indented wire.

Drug-Eluting Medical Textiles: From Fiber Production and Textile Fabrication to Drug Loading and Delivery

Drug-eluting medical textiles have recently gained great attention to be used in different applications due to their cost effectiveness and unique physical and chemical properties. Using various fiber production and textile fabrication technologies, fibrous constructs with the required properties for the target drug delivery systems can be designed and fabricated. This review summarizes the current advances in the fabrication of drug-eluting medical textiles. Different fiber production methods such as melt-, wet-, and electro-spinning, and textile fabrication techniques such as knitting and weaving are explained. Moreover, various loading processes of bioactive agents to obtain drug-loaded fibrous structures with required physicochemical and morphological properties, drug delivery mechanisms, and drug release kinetics are discussed. Finally, the current applications of drug-eluting fibrous systems in wound care, tissue engineering, and transdermal drug delivery are highlighted.

An in-silico Investigation Into the Role of Strain and Structure on Vascular Smooth Muscle Cell Growth

The orientation of vascular cells can greatly influence the in vivo mechanical properties and functionality of soft vascular tissues. How cell orientation mediates the growth response of cells is of critical importance in understanding the response of soft tissues to mechanical stimuli or injury. To date, considerable evidence has shown that cells align with structural cues such as collagen fibers. However, in the presence of uniaxial cyclic strain on unstructured substrates, cells generally align themselves perpendicularly to the mechanical stimulus, such as strain, a phenomenon known as “strain avoidance.” The cellular response to this interplay between structural cues and a mechanical stimulus is poorly understood. A recent in vitro experimental study in our lab has investigated both the individual and collective response of rat aortic smooth muscle cells (RASMC) to structural (collagenous aligned constructs) and mechanical (cyclic strain) cues. In this study, a 2D agent-based model (ABM) is developed to simulate the collective response of RASMC to varying amplitudes of cyclic strain (0–10%, 2–8%, 4–6%) when seeded on unstructured (PDMS) and structured (decellularized collagenous tissue) constructs. An ABM is presented that is fit to the experimental outcomes in terms of cellular alignment and cell growth on PDMS substrates, under cyclic strain amplitudes of (4–6%, 2–8%, 0–10%) at 24 and 72 h timepoints. Furthermore, the ABM can predict RASMC alignment and change in cell number on a structured construct at a cyclic strain amplitude of 0–10% after 10 days. The ABM suggests that strain avoidance behavior observed in cells is dominated by selective cell proliferation and apoptosis at these early time points, as opposed to cell re-orientation, i.e., cells perpendicular to the strain increase their rate of proliferation, whilst the rate of apoptosis simultaneously increases in cells parallel to the strain direction. The development of in-silico modeling platforms, such as that presented here, allow for further understanding of the response of cells to changes in their mechanical environment. Such models offer an efficient and robust means to design and optimize the compliance and topological structure of implantable devices and could be used to aid the design of next-generation vascular grafts and stents.

Optical coherence tomography and multiphoton microscopy offer new options for the quantification of fibrotic aortic valve disease in ApoE-/- mice

Aortic valve sclerosis is characterized as the thickening of the aortic valve without obstruction of the left ventricular outflow. It has a prevalence of 30% in people over 65 years old. Aortic valve sclerosis represents a cardiovascular risk marker because it may progress to moderate or severe aortic valve stenosis. Thus, the early recognition and management of aortic valve sclerosis are of cardinal importance. We examined the aortic valve geometry and structure from healthy C57Bl6 wild type and age-matched hyperlipidemic ApoE-/- mice with aortic valve sclerosis using optical coherence tomography (OCT) and multiphoton microscopy (MPM) and compared results with histological analyses. Early fibrotic thickening, especially in the tip region of the native aortic valve leaflets from the ApoE-/- mice, was detectable in a precise spatial resolution using OCT. Evaluation of the second harmonic generation signal using MPM demonstrated that collagen content decreased in all aortic valve leaflet regions in the ApoE-/- mice. Lipid droplets and cholesterol crystals were detected using coherent anti-Stokes Raman scattering in the tissue from the ApoE-/- mice. Here, we demonstrated that OCT and MPM, which are fast and precise contactless imaging approaches, are suitable for defining early morphological and structural alterations of sclerotic murine aortic valves.

Ex Vivo Regional Mechanical Characterization of Porcine Pulmonary Arteries

BACKGROUND

Regional mechanical characterization of pulmonary arteries can be useful in the development of computational models of pulmonary arterial mechanics.

OBJECTIVE

We performed a biomechanical and microstructural characterization study of porcine pulmonary arteries, inclusive of the main, left, and right pulmonary arteries (MPA, LPA, and RPA, respectively).

METHODS

The specimens were initially stored at -20°C and allowed to thaw for 12-24 hours prior to testing. Each artery was further subdivided into proximal, middle, and distal regions, leading to ten location-based experimental groups. Planar equibiaxial tensile testing was performed to evaluate the mechanical behavior of the specimens, from which we calculated the stress at the maximum strain (S ₅₅), tensile modulus (TM), anisotropy index (AI), and strain energy in terms of area under the stress-strain curve (AUC). Histological quantification was performed to evaluate the area fraction of elastin and collagen content, intima-media thickness (IMT), and adventitial thickness (AT). The constitutive material behavior of each group was represented by a five-constant Holzapfel-Gasser-Ogden model.

RESULTS

The specimens exhibited non-linear stress-strain characteristics across all groups. The MPA exhibited the highest mean wall stress and TM in the longitudinal and circumferential directions, while the bifurcation region yielded the highest values of AI and AUC. All regions revealed a higher stiffness in the longitudinal direction compared to the circumferential direction, suggesting a degree of anisotropy that is believed to be within the margin of experimental uncertainty. Collagen content was found to be the highest in the MPA and decreased significantly at the bifurcation, LPA and RPA. Elastin content did not yield such significant differences amongst the ten groups. The MPA had the highest IMT, which decreased concomitantly to the distal LPA and RPA. No significant differences were found in the AT amongst the ten groups.

CONCLUSION

The mechanical properties of porcine pulmonary arteries exhibit strong regional dissimilarities, which can be used to inform future studies of high fidelity finite element models.

Preventive Effect of Albumin Nano TPA Gene Plasmid Ultrasound Microbubble Carrier System on Thrombosis after Cardiac Valve Replacement

After cardiac valve replacement, most patients will have different degrees of thrombosis, different parts of the thrombus, and even more frequent occurrence of postoperative thrombosis; therefore, the prevention of postoperative thrombosis is particularly important. The purpose of this study was to investigate the preventive effect of albumin nano tPA gene plasmid ultrasound microbubble carrier system on thrombosis, especially in cardiac valve. The experimental control method was used. Firstly, 11 dogs meeting the experimental requirements were selected. Secondly, the data of albumin nanoparticles and microbubbles were analyzed. The average size of albumin particles was 132.0 nm, the average size of microbubbles was 3.1 ± 1.6 μm, and the zeta potential was 13.70 ± 1.95 MV. The concentration of microbubbles was 4.2 ± 1.3 × 10/ml. Finally, 11 dogs were divided into two groups. The experimental group was treated with albumin nanoparticles ultrasound microbubble, and the others were the control group. It was found that the levels of tPA and D-dimer in the experimental group were significantly increased and maintained at a high level at 1 week after operation, and the prothrombin time was detected and the international normalized ratio was calculated at the same time. No significant changes were found in the experimental group.

Alteration of structural and mechanical properties of the temporomandibular joint disc following elastase digestion

The temporomandibular joint disc is a fibrocartilaginous structure, composed of collagen fibers, elastin fibers, and proteoglycans. Despite the crucial role of elastin fibers in load‐bearing properties of connective tissues, its contribution in temporomandibular joint disc biomechanics has been disregarded. This study attempts to characterize the structural–functional contribution of elastin in the temporomandibular joint disc. Using elastase, we selectively perturbed the elastin fiber network in porcine temporomandibular joint discs and investigated the structural, compositional, and mechanical regional changes through: (a) analysis of collagen and elastin fibers by immunolabeling and transmission electron microscopy; (b) quantitative analysis of collagen tortuosity, cell shape, and disc volume; (c) biochemical quantification of collagen, glycosaminoglycan and elastin content; and (d) cyclic compression test. Following elastase treatment, microscopic examination revealed fragmentation of elastin fibers across the temporomandibular joint disc, with a more pronounced effect in the intermediate regions. Also, biochemical analyses of the intermediate regions showed significant depletion of elastin (50%), and substantial decrease in collagen (20%) and glycosaminoglycan (49%) content, likely due to non‐specific activity of elastase. Degradation of elastin fibers affected the homeostatic configuration of the disc, reflected in its significant volume enlargement accompanied by remarkable reduction of collagen tortuosity and cell elongation. Mechanically, elastase treatment nearly doubled the maximal energy dissipation across the intermediate regions while the instantaneous modulus was not significantly affected. We conclude that elastin fibers contribute to the restoration and maintenance of the disc resting shape and actively interact with collagen fibers to provide mechanical resilience to the temporomandibular joint disc.

An in vitro model to evaluate the properties of matrices produced by fibroblasts from osteogenesis imperfecta and Ehlers-Danlos Syndrome patients

AIM OF THE STUDY

Osteogenesis imperfecta and Ehlers Danlos syndrome are hereditary disorders caused primarily by defective collagen regulation. Osteogenesis imperfecta patients were divided to haploinsufficient and dominant negative depending on the effect of COL1A1 and COL1A2 mutations whereas Ehlers Danlos syndrome patients had a mutation in PLOD1. Although collagen abnormalities have been extensively studied in monolayer cultures, there are no reports about 3D in vitro models which may reflect more accurately the dynamic cell environment. This is the first study presenting the structural and mechanical characterization of a 3D cell-secreted model using primary patient fibroblasts.

MATERIALS AND METHODS

Fibroblasts from patients with osteogenesis imperfecta and Ehlers Danlos syndrome were cultured with ascorbic acid for 5 weeks. The effect of mutations on cytosolic and secreted collagen was tested by electrophoresis following incubation with radiolabeled ¹⁴C proline. Extracellular matrix was studied in terms of collagen fiber orientation, stiffness, as well as glycosaminoglycan and collagen content.

RESULTS AND CONCLUSIONS

Osteogenesis imperfecta patients with haploinsufficient mutations had higher percentage of anisotropic collagen fibers alignment compared to other patient groups; all patients had a lower percentage of anisotropic samples compared to healthy controls. This correlated with higher average stiffness in the control group. Glycosaminoglycan content was lower in the control and haploinsufficient groups. In cells with PLOD1 mutations, there were no differences in PLOD2 expression. This proof of concept study was able to show differences in collagen fiber orientation between different patient groups which can potentially pave the way towards the development of 3D models aiming at improved investigation of disease mechanisms.

Evaluation of an elastic decellularized tendon-derived scaffold for the vascular tissue engineering application

Due to the limited success rate of currently available vascular replacements, tissue engineering has received tremendous attention in recent years. A main challenge in the field of regenerative medicine is creating a mechanically functional tissue with a well-organized extracellular matrix, particularly of collagen and elastin. In this study, the native collagen scaffold derived from decellularized tendon sections, as a scaffold having the potential to be used for vascular tissue engineering applications, was studied. We showed that the elasticity of the scaffolds was improved when crosslinked with the bovine elastin. The effect of different concentrations of elastin on mechanical properties of the collagen scaffolds was evaluated of which 15% elastin concentration was selected for further analysis based on the results. Addition of 15% elastin to collagen scaffolds significantly decreased Young's modulus and the tensile stress at the maximum load and increased the tensile strain at the maximum load of the constructs as compared to those of the collagen scaffolds or control samples. Moreover, tubular elastin modified collagen scaffolds showed significantly higher burst pressure compared to the control samples. Smooth muscle cells and endothelial cells cultured on the elastin modified collagen scaffolds showed high viability (>80%) after 1, 3, and 7 days. Furthermore, the cells showed a high tendency to align with the collagen fibers within the scaffold and produced their own extracellular matrix over time. In conclusion, the results show that the decellularized tendon sections have a great potential to be used as scaffolds for vascular tissue engineering applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1225-1234, 2019.

Strain mediated enzymatic degradation of arterial tissue: Insights into the role of the non-collagenous tissue matrix and collagen crimp

Collagen fibre remodelling is a strain dependent process which is stimulated by the degradation of existing collagen. To date, literature has focussed on strain dependent degradation of pure collagen or structurally simple collagenous tissues, often overlooking degradation within more complex, heterogenous soft tissues. The aim of this study is to identify, for the first time, the strain dependent degradation behaviour and mechanical factors influencing collagen degradation in arterial tissue using a combined experimental and numerical approach. To achieve this, structural analysis was carried out using small angle light scattering to determine the fibre level response due to strain induced degradation. Next, strain dependent degradation rates were determined from stress relaxation experiments in the presence of crude and purified collagenase to determine the tissue level degradation response. Finally, a 1D theoretical model was developed, incorporating matrix stiffness and a gradient of collagen fibre crimp to decouple the mechanism behind strain dependent arterial degradation. SALS structural analysis identified a strain mediated degradation response in arterial tissue at the fibre level not dissimilar to that found in literature for pure collagen. Interestingly, two distinctly different strain mediated degradation responses were identified experimentally at the tissue level, not seen in other collagenous tissues. Our model was able to accurately predict these experimental findings, but only once the load bearing matrix, its degradation response and the gradient of collagen fibre crimp across the arterial wall were incorporated. These findings highlight the critical role that the various tissue constituents play in the degradation response of arterial tissue.

STATEMENT OF SIGNIFICANCE

Collagen fibre architecture is the dominant load bearing component of arterial tissue. Remodelling of this architecture is a strain dependent process stimulated by the degradation of existing collagen. Despite this, degradation of arterial tissue and in particular, arterial collagen, is not fully understood or studied. In the current study, we identified for the first time, the strain dependent degradation response of arterial tissue, which has not been observed in other collagenous tissues in literature. We hypothesised that this unique degradation response was due to the complex structure observed in arterial tissue. Based on this hypothesis, we developed a novel numerical model capable of explaining this unique degradation response which may provide critical insights into disease development and aid in the design of interventional medical devices.

Morphogenesis of aligned collagen fibers in the annulus fibrosus: Mammals versus avians

The mammalian intervertebral disc (IVD) consists of a gel-like, disordered nucleus pulposus (NP) surrounded by a highly ordered collagen structure, the annulus fibrosus (AF). While this concentric array of lamellae has been amply studied, its physical origin is poorly understood. The notochord is a rod-like organ located in the mid-line of the growing embryo and plays an essential role in IVD development. The aim of this study was to elucidate the effect of notochord development on the collagen fiber arrangement evolution in the AF. To that end, we studied IVD development in mouse embryos and compared these observations to those from chicken embryos, which do not form the typical laminar structure around the NP. In mouse, cross-aligned collagen arrangement of the AF forms from the sclerotome upon bulging of the notochord to become NP. By contrast, the notochord in the chicken embryo swells substantially without the physical restrictions of the future vertebrae and thus do not bulge. From these observations, we conclude that physical and geometrical constrictions are essential for the formation of the highly structured AF.